mirror of
				https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
				synced 2025-10-31 14:30:50 +00:00 
			
		
		
		
	 4246b06a33
			
		
	
	
		4246b06a33
		
	
	
	
	
		
			
			The lack of a MODULE_LICENSE macro in ums-* subdrivers prevented them from loading. Needs to be applied after Alan Stern's usb-storage subdriver separation patchset. Also added missing MODULE_DESCRIPTION and MODULE_AUTHOR entries. Signed-off-by: Maciej Grela <maciej.grela@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
		
			
				
	
	
		
			1292 lines
		
	
	
		
			34 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1292 lines
		
	
	
		
			34 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Driver for Alauda-based card readers
 | |
|  *
 | |
|  * Current development and maintenance by:
 | |
|  *   (c) 2005 Daniel Drake <dsd@gentoo.org>
 | |
|  *
 | |
|  * The 'Alauda' is a chip manufacturered by RATOC for OEM use.
 | |
|  *
 | |
|  * Alauda implements a vendor-specific command set to access two media reader
 | |
|  * ports (XD, SmartMedia). This driver converts SCSI commands to the commands
 | |
|  * which are accepted by these devices.
 | |
|  *
 | |
|  * The driver was developed through reverse-engineering, with the help of the
 | |
|  * sddr09 driver which has many similarities, and with some help from the
 | |
|  * (very old) vendor-supplied GPL sma03 driver.
 | |
|  *
 | |
|  * For protocol info, see http://alauda.sourceforge.net
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify it
 | |
|  * under the terms of the GNU General Public License as published by the
 | |
|  * Free Software Foundation; either version 2, or (at your option) any
 | |
|  * later version.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful, but
 | |
|  * WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 | |
|  * General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License along
 | |
|  * with this program; if not, write to the Free Software Foundation, Inc.,
 | |
|  * 675 Mass Ave, Cambridge, MA 02139, USA.
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| 
 | |
| #include <scsi/scsi.h>
 | |
| #include <scsi/scsi_cmnd.h>
 | |
| #include <scsi/scsi_device.h>
 | |
| 
 | |
| #include "usb.h"
 | |
| #include "transport.h"
 | |
| #include "protocol.h"
 | |
| #include "debug.h"
 | |
| 
 | |
| MODULE_DESCRIPTION("Driver for Alauda-based card readers");
 | |
| MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>");
 | |
| MODULE_LICENSE("GPL");
 | |
| 
 | |
| /*
 | |
|  * Status bytes
 | |
|  */
 | |
| #define ALAUDA_STATUS_ERROR		0x01
 | |
| #define ALAUDA_STATUS_READY		0x40
 | |
| 
 | |
| /*
 | |
|  * Control opcodes (for request field)
 | |
|  */
 | |
| #define ALAUDA_GET_XD_MEDIA_STATUS	0x08
 | |
| #define ALAUDA_GET_SM_MEDIA_STATUS	0x98
 | |
| #define ALAUDA_ACK_XD_MEDIA_CHANGE	0x0a
 | |
| #define ALAUDA_ACK_SM_MEDIA_CHANGE	0x9a
 | |
| #define ALAUDA_GET_XD_MEDIA_SIG		0x86
 | |
| #define ALAUDA_GET_SM_MEDIA_SIG		0x96
 | |
| 
 | |
| /*
 | |
|  * Bulk command identity (byte 0)
 | |
|  */
 | |
| #define ALAUDA_BULK_CMD			0x40
 | |
| 
 | |
| /*
 | |
|  * Bulk opcodes (byte 1)
 | |
|  */
 | |
| #define ALAUDA_BULK_GET_REDU_DATA	0x85
 | |
| #define ALAUDA_BULK_READ_BLOCK		0x94
 | |
| #define ALAUDA_BULK_ERASE_BLOCK		0xa3
 | |
| #define ALAUDA_BULK_WRITE_BLOCK		0xb4
 | |
| #define ALAUDA_BULK_GET_STATUS2		0xb7
 | |
| #define ALAUDA_BULK_RESET_MEDIA		0xe0
 | |
| 
 | |
| /*
 | |
|  * Port to operate on (byte 8)
 | |
|  */
 | |
| #define ALAUDA_PORT_XD			0x00
 | |
| #define ALAUDA_PORT_SM			0x01
 | |
| 
 | |
| /*
 | |
|  * LBA and PBA are unsigned ints. Special values.
 | |
|  */
 | |
| #define UNDEF    0xffff
 | |
| #define SPARE    0xfffe
 | |
| #define UNUSABLE 0xfffd
 | |
| 
 | |
| struct alauda_media_info {
 | |
| 	unsigned long capacity;		/* total media size in bytes */
 | |
| 	unsigned int pagesize;		/* page size in bytes */
 | |
| 	unsigned int blocksize;		/* number of pages per block */
 | |
| 	unsigned int uzonesize;		/* number of usable blocks per zone */
 | |
| 	unsigned int zonesize;		/* number of blocks per zone */
 | |
| 	unsigned int blockmask;		/* mask to get page from address */
 | |
| 
 | |
| 	unsigned char pageshift;
 | |
| 	unsigned char blockshift;
 | |
| 	unsigned char zoneshift;
 | |
| 
 | |
| 	u16 **lba_to_pba;		/* logical to physical block map */
 | |
| 	u16 **pba_to_lba;		/* physical to logical block map */
 | |
| };
 | |
| 
 | |
| struct alauda_info {
 | |
| 	struct alauda_media_info port[2];
 | |
| 	int wr_ep;			/* endpoint to write data out of */
 | |
| 
 | |
| 	unsigned char sense_key;
 | |
| 	unsigned long sense_asc;	/* additional sense code */
 | |
| 	unsigned long sense_ascq;	/* additional sense code qualifier */
 | |
| };
 | |
| 
 | |
| #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
 | |
| #define LSB_of(s) ((s)&0xFF)
 | |
| #define MSB_of(s) ((s)>>8)
 | |
| 
 | |
| #define MEDIA_PORT(us) us->srb->device->lun
 | |
| #define MEDIA_INFO(us) ((struct alauda_info *)us->extra)->port[MEDIA_PORT(us)]
 | |
| 
 | |
| #define PBA_LO(pba) ((pba & 0xF) << 5)
 | |
| #define PBA_HI(pba) (pba >> 3)
 | |
| #define PBA_ZONE(pba) (pba >> 11)
 | |
| 
 | |
| static int init_alauda(struct us_data *us);
 | |
| 
 | |
| 
 | |
| /*
 | |
|  * The table of devices
 | |
|  */
 | |
| #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
 | |
| 		    vendorName, productName, useProtocol, useTransport, \
 | |
| 		    initFunction, flags) \
 | |
| { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
 | |
|   .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
 | |
| 
 | |
| struct usb_device_id alauda_usb_ids[] = {
 | |
| #	include "unusual_alauda.h"
 | |
| 	{ }		/* Terminating entry */
 | |
| };
 | |
| MODULE_DEVICE_TABLE(usb, alauda_usb_ids);
 | |
| 
 | |
| #undef UNUSUAL_DEV
 | |
| 
 | |
| /*
 | |
|  * The flags table
 | |
|  */
 | |
| #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
 | |
| 		    vendor_name, product_name, use_protocol, use_transport, \
 | |
| 		    init_function, Flags) \
 | |
| { \
 | |
| 	.vendorName = vendor_name,	\
 | |
| 	.productName = product_name,	\
 | |
| 	.useProtocol = use_protocol,	\
 | |
| 	.useTransport = use_transport,	\
 | |
| 	.initFunction = init_function,	\
 | |
| }
 | |
| 
 | |
| static struct us_unusual_dev alauda_unusual_dev_list[] = {
 | |
| #	include "unusual_alauda.h"
 | |
| 	{ }		/* Terminating entry */
 | |
| };
 | |
| 
 | |
| #undef UNUSUAL_DEV
 | |
| 
 | |
| 
 | |
| /*
 | |
|  * Media handling
 | |
|  */
 | |
| 
 | |
| struct alauda_card_info {
 | |
| 	unsigned char id;		/* id byte */
 | |
| 	unsigned char chipshift;	/* 1<<cs bytes total capacity */
 | |
| 	unsigned char pageshift;	/* 1<<ps bytes in a page */
 | |
| 	unsigned char blockshift;	/* 1<<bs pages per block */
 | |
| 	unsigned char zoneshift;	/* 1<<zs blocks per zone */
 | |
| };
 | |
| 
 | |
| static struct alauda_card_info alauda_card_ids[] = {
 | |
| 	/* NAND flash */
 | |
| 	{ 0x6e, 20, 8, 4, 8},	/* 1 MB */
 | |
| 	{ 0xe8, 20, 8, 4, 8},	/* 1 MB */
 | |
| 	{ 0xec, 20, 8, 4, 8},	/* 1 MB */
 | |
| 	{ 0x64, 21, 8, 4, 9}, 	/* 2 MB */
 | |
| 	{ 0xea, 21, 8, 4, 9},	/* 2 MB */
 | |
| 	{ 0x6b, 22, 9, 4, 9},	/* 4 MB */
 | |
| 	{ 0xe3, 22, 9, 4, 9},	/* 4 MB */
 | |
| 	{ 0xe5, 22, 9, 4, 9},	/* 4 MB */
 | |
| 	{ 0xe6, 23, 9, 4, 10},	/* 8 MB */
 | |
| 	{ 0x73, 24, 9, 5, 10},	/* 16 MB */
 | |
| 	{ 0x75, 25, 9, 5, 10},	/* 32 MB */
 | |
| 	{ 0x76, 26, 9, 5, 10},	/* 64 MB */
 | |
| 	{ 0x79, 27, 9, 5, 10},	/* 128 MB */
 | |
| 	{ 0x71, 28, 9, 5, 10},	/* 256 MB */
 | |
| 
 | |
| 	/* MASK ROM */
 | |
| 	{ 0x5d, 21, 9, 4, 8},	/* 2 MB */
 | |
| 	{ 0xd5, 22, 9, 4, 9},	/* 4 MB */
 | |
| 	{ 0xd6, 23, 9, 4, 10},	/* 8 MB */
 | |
| 	{ 0x57, 24, 9, 4, 11},	/* 16 MB */
 | |
| 	{ 0x58, 25, 9, 4, 12},	/* 32 MB */
 | |
| 	{ 0,}
 | |
| };
 | |
| 
 | |
| static struct alauda_card_info *alauda_card_find_id(unsigned char id) {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; alauda_card_ids[i].id != 0; i++)
 | |
| 		if (alauda_card_ids[i].id == id)
 | |
| 			return &(alauda_card_ids[i]);
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * ECC computation.
 | |
|  */
 | |
| 
 | |
| static unsigned char parity[256];
 | |
| static unsigned char ecc2[256];
 | |
| 
 | |
| static void nand_init_ecc(void) {
 | |
| 	int i, j, a;
 | |
| 
 | |
| 	parity[0] = 0;
 | |
| 	for (i = 1; i < 256; i++)
 | |
| 		parity[i] = (parity[i&(i-1)] ^ 1);
 | |
| 
 | |
| 	for (i = 0; i < 256; i++) {
 | |
| 		a = 0;
 | |
| 		for (j = 0; j < 8; j++) {
 | |
| 			if (i & (1<<j)) {
 | |
| 				if ((j & 1) == 0)
 | |
| 					a ^= 0x04;
 | |
| 				if ((j & 2) == 0)
 | |
| 					a ^= 0x10;
 | |
| 				if ((j & 4) == 0)
 | |
| 					a ^= 0x40;
 | |
| 			}
 | |
| 		}
 | |
| 		ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0));
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /* compute 3-byte ecc on 256 bytes */
 | |
| static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) {
 | |
| 	int i, j, a;
 | |
| 	unsigned char par, bit, bits[8];
 | |
| 
 | |
| 	par = 0;
 | |
| 	for (j = 0; j < 8; j++)
 | |
| 		bits[j] = 0;
 | |
| 
 | |
| 	/* collect 16 checksum bits */
 | |
| 	for (i = 0; i < 256; i++) {
 | |
| 		par ^= data[i];
 | |
| 		bit = parity[data[i]];
 | |
| 		for (j = 0; j < 8; j++)
 | |
| 			if ((i & (1<<j)) == 0)
 | |
| 				bits[j] ^= bit;
 | |
| 	}
 | |
| 
 | |
| 	/* put 4+4+4 = 12 bits in the ecc */
 | |
| 	a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0];
 | |
| 	ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
 | |
| 
 | |
| 	a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4];
 | |
| 	ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
 | |
| 
 | |
| 	ecc[2] = ecc2[par];
 | |
| }
 | |
| 
 | |
| static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) {
 | |
| 	return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]);
 | |
| }
 | |
| 
 | |
| static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
 | |
| 	memcpy(data, ecc, 3);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Alauda driver
 | |
|  */
 | |
| 
 | |
| /*
 | |
|  * Forget our PBA <---> LBA mappings for a particular port
 | |
|  */
 | |
| static void alauda_free_maps (struct alauda_media_info *media_info)
 | |
| {
 | |
| 	unsigned int shift = media_info->zoneshift
 | |
| 		+ media_info->blockshift + media_info->pageshift;
 | |
| 	unsigned int num_zones = media_info->capacity >> shift;
 | |
| 	unsigned int i;
 | |
| 
 | |
| 	if (media_info->lba_to_pba != NULL)
 | |
| 		for (i = 0; i < num_zones; i++) {
 | |
| 			kfree(media_info->lba_to_pba[i]);
 | |
| 			media_info->lba_to_pba[i] = NULL;
 | |
| 		}
 | |
| 
 | |
| 	if (media_info->pba_to_lba != NULL)
 | |
| 		for (i = 0; i < num_zones; i++) {
 | |
| 			kfree(media_info->pba_to_lba[i]);
 | |
| 			media_info->pba_to_lba[i] = NULL;
 | |
| 		}
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Returns 2 bytes of status data
 | |
|  * The first byte describes media status, and second byte describes door status
 | |
|  */
 | |
| static int alauda_get_media_status(struct us_data *us, unsigned char *data)
 | |
| {
 | |
| 	int rc;
 | |
| 	unsigned char command;
 | |
| 
 | |
| 	if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
 | |
| 		command = ALAUDA_GET_XD_MEDIA_STATUS;
 | |
| 	else
 | |
| 		command = ALAUDA_GET_SM_MEDIA_STATUS;
 | |
| 
 | |
| 	rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
 | |
| 		command, 0xc0, 0, 1, data, 2);
 | |
| 
 | |
| 	US_DEBUGP("alauda_get_media_status: Media status %02X %02X\n",
 | |
| 		data[0], data[1]);
 | |
| 
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Clears the "media was changed" bit so that we know when it changes again
 | |
|  * in the future.
 | |
|  */
 | |
| static int alauda_ack_media(struct us_data *us)
 | |
| {
 | |
| 	unsigned char command;
 | |
| 
 | |
| 	if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
 | |
| 		command = ALAUDA_ACK_XD_MEDIA_CHANGE;
 | |
| 	else
 | |
| 		command = ALAUDA_ACK_SM_MEDIA_CHANGE;
 | |
| 
 | |
| 	return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
 | |
| 		command, 0x40, 0, 1, NULL, 0);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Retrieves a 4-byte media signature, which indicates manufacturer, capacity,
 | |
|  * and some other details.
 | |
|  */
 | |
| static int alauda_get_media_signature(struct us_data *us, unsigned char *data)
 | |
| {
 | |
| 	unsigned char command;
 | |
| 
 | |
| 	if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
 | |
| 		command = ALAUDA_GET_XD_MEDIA_SIG;
 | |
| 	else
 | |
| 		command = ALAUDA_GET_SM_MEDIA_SIG;
 | |
| 
 | |
| 	return usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
 | |
| 		command, 0xc0, 0, 0, data, 4);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Resets the media status (but not the whole device?)
 | |
|  */
 | |
| static int alauda_reset_media(struct us_data *us)
 | |
| {
 | |
| 	unsigned char *command = us->iobuf;
 | |
| 
 | |
| 	memset(command, 0, 9);
 | |
| 	command[0] = ALAUDA_BULK_CMD;
 | |
| 	command[1] = ALAUDA_BULK_RESET_MEDIA;
 | |
| 	command[8] = MEDIA_PORT(us);
 | |
| 
 | |
| 	return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
 | |
| 		command, 9, NULL);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Examines the media and deduces capacity, etc.
 | |
|  */
 | |
| static int alauda_init_media(struct us_data *us)
 | |
| {
 | |
| 	unsigned char *data = us->iobuf;
 | |
| 	int ready = 0;
 | |
| 	struct alauda_card_info *media_info;
 | |
| 	unsigned int num_zones;
 | |
| 
 | |
| 	while (ready == 0) {
 | |
| 		msleep(20);
 | |
| 
 | |
| 		if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD)
 | |
| 			return USB_STOR_TRANSPORT_ERROR;
 | |
| 
 | |
| 		if (data[0] & 0x10)
 | |
| 			ready = 1;
 | |
| 	}
 | |
| 
 | |
| 	US_DEBUGP("alauda_init_media: We are ready for action!\n");
 | |
| 
 | |
| 	if (alauda_ack_media(us) != USB_STOR_XFER_GOOD)
 | |
| 		return USB_STOR_TRANSPORT_ERROR;
 | |
| 
 | |
| 	msleep(10);
 | |
| 
 | |
| 	if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD)
 | |
| 		return USB_STOR_TRANSPORT_ERROR;
 | |
| 
 | |
| 	if (data[0] != 0x14) {
 | |
| 		US_DEBUGP("alauda_init_media: Media not ready after ack\n");
 | |
| 		return USB_STOR_TRANSPORT_ERROR;
 | |
| 	}
 | |
| 
 | |
| 	if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD)
 | |
| 		return USB_STOR_TRANSPORT_ERROR;
 | |
| 
 | |
| 	US_DEBUGP("alauda_init_media: Media signature: %02X %02X %02X %02X\n",
 | |
| 		data[0], data[1], data[2], data[3]);
 | |
| 	media_info = alauda_card_find_id(data[1]);
 | |
| 	if (media_info == NULL) {
 | |
| 		printk(KERN_WARNING
 | |
| 			"alauda_init_media: Unrecognised media signature: "
 | |
| 			"%02X %02X %02X %02X\n",
 | |
| 			data[0], data[1], data[2], data[3]);
 | |
| 		return USB_STOR_TRANSPORT_ERROR;
 | |
| 	}
 | |
| 
 | |
| 	MEDIA_INFO(us).capacity = 1 << media_info->chipshift;
 | |
| 	US_DEBUGP("Found media with capacity: %ldMB\n",
 | |
| 		MEDIA_INFO(us).capacity >> 20);
 | |
| 
 | |
| 	MEDIA_INFO(us).pageshift = media_info->pageshift;
 | |
| 	MEDIA_INFO(us).blockshift = media_info->blockshift;
 | |
| 	MEDIA_INFO(us).zoneshift = media_info->zoneshift;
 | |
| 
 | |
| 	MEDIA_INFO(us).pagesize = 1 << media_info->pageshift;
 | |
| 	MEDIA_INFO(us).blocksize = 1 << media_info->blockshift;
 | |
| 	MEDIA_INFO(us).zonesize = 1 << media_info->zoneshift;
 | |
| 
 | |
| 	MEDIA_INFO(us).uzonesize = ((1 << media_info->zoneshift) / 128) * 125;
 | |
| 	MEDIA_INFO(us).blockmask = MEDIA_INFO(us).blocksize - 1;
 | |
| 
 | |
| 	num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
 | |
| 		+ MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
 | |
| 	MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
 | |
| 	MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
 | |
| 
 | |
| 	if (alauda_reset_media(us) != USB_STOR_XFER_GOOD)
 | |
| 		return USB_STOR_TRANSPORT_ERROR;
 | |
| 
 | |
| 	return USB_STOR_TRANSPORT_GOOD;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Examines the media status and does the right thing when the media has gone,
 | |
|  * appeared, or changed.
 | |
|  */
 | |
| static int alauda_check_media(struct us_data *us)
 | |
| {
 | |
| 	struct alauda_info *info = (struct alauda_info *) us->extra;
 | |
| 	unsigned char status[2];
 | |
| 	int rc;
 | |
| 
 | |
| 	rc = alauda_get_media_status(us, status);
 | |
| 
 | |
| 	/* Check for no media or door open */
 | |
| 	if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10)
 | |
| 		|| ((status[1] & 0x01) == 0)) {
 | |
| 		US_DEBUGP("alauda_check_media: No media, or door open\n");
 | |
| 		alauda_free_maps(&MEDIA_INFO(us));
 | |
| 		info->sense_key = 0x02;
 | |
| 		info->sense_asc = 0x3A;
 | |
| 		info->sense_ascq = 0x00;
 | |
| 		return USB_STOR_TRANSPORT_FAILED;
 | |
| 	}
 | |
| 
 | |
| 	/* Check for media change */
 | |
| 	if (status[0] & 0x08) {
 | |
| 		US_DEBUGP("alauda_check_media: Media change detected\n");
 | |
| 		alauda_free_maps(&MEDIA_INFO(us));
 | |
| 		alauda_init_media(us);
 | |
| 
 | |
| 		info->sense_key = UNIT_ATTENTION;
 | |
| 		info->sense_asc = 0x28;
 | |
| 		info->sense_ascq = 0x00;
 | |
| 		return USB_STOR_TRANSPORT_FAILED;
 | |
| 	}
 | |
| 
 | |
| 	return USB_STOR_TRANSPORT_GOOD;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Checks the status from the 2nd status register
 | |
|  * Returns 3 bytes of status data, only the first is known
 | |
|  */
 | |
| static int alauda_check_status2(struct us_data *us)
 | |
| {
 | |
| 	int rc;
 | |
| 	unsigned char command[] = {
 | |
| 		ALAUDA_BULK_CMD, ALAUDA_BULK_GET_STATUS2,
 | |
| 		0, 0, 0, 0, 3, 0, MEDIA_PORT(us)
 | |
| 	};
 | |
| 	unsigned char data[3];
 | |
| 
 | |
| 	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
 | |
| 		command, 9, NULL);
 | |
| 	if (rc != USB_STOR_XFER_GOOD)
 | |
| 		return rc;
 | |
| 
 | |
| 	rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
 | |
| 		data, 3, NULL);
 | |
| 	if (rc != USB_STOR_XFER_GOOD)
 | |
| 		return rc;
 | |
| 
 | |
| 	US_DEBUGP("alauda_check_status2: %02X %02X %02X\n", data[0], data[1], data[2]);
 | |
| 	if (data[0] & ALAUDA_STATUS_ERROR)
 | |
| 		return USB_STOR_XFER_ERROR;
 | |
| 
 | |
| 	return USB_STOR_XFER_GOOD;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Gets the redundancy data for the first page of a PBA
 | |
|  * Returns 16 bytes.
 | |
|  */
 | |
| static int alauda_get_redu_data(struct us_data *us, u16 pba, unsigned char *data)
 | |
| {
 | |
| 	int rc;
 | |
| 	unsigned char command[] = {
 | |
| 		ALAUDA_BULK_CMD, ALAUDA_BULK_GET_REDU_DATA,
 | |
| 		PBA_HI(pba), PBA_ZONE(pba), 0, PBA_LO(pba), 0, 0, MEDIA_PORT(us)
 | |
| 	};
 | |
| 
 | |
| 	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
 | |
| 		command, 9, NULL);
 | |
| 	if (rc != USB_STOR_XFER_GOOD)
 | |
| 		return rc;
 | |
| 
 | |
| 	return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
 | |
| 		data, 16, NULL);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Finds the first unused PBA in a zone
 | |
|  * Returns the absolute PBA of an unused PBA, or 0 if none found.
 | |
|  */
 | |
| static u16 alauda_find_unused_pba(struct alauda_media_info *info,
 | |
| 	unsigned int zone)
 | |
| {
 | |
| 	u16 *pba_to_lba = info->pba_to_lba[zone];
 | |
| 	unsigned int i;
 | |
| 
 | |
| 	for (i = 0; i < info->zonesize; i++)
 | |
| 		if (pba_to_lba[i] == UNDEF)
 | |
| 			return (zone << info->zoneshift) + i;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Reads the redundancy data for all PBA's in a zone
 | |
|  * Produces lba <--> pba mappings
 | |
|  */
 | |
| static int alauda_read_map(struct us_data *us, unsigned int zone)
 | |
| {
 | |
| 	unsigned char *data = us->iobuf;
 | |
| 	int result;
 | |
| 	int i, j;
 | |
| 	unsigned int zonesize = MEDIA_INFO(us).zonesize;
 | |
| 	unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
 | |
| 	unsigned int lba_offset, lba_real, blocknum;
 | |
| 	unsigned int zone_base_lba = zone * uzonesize;
 | |
| 	unsigned int zone_base_pba = zone * zonesize;
 | |
| 	u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
 | |
| 	u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
 | |
| 	if (lba_to_pba == NULL || pba_to_lba == NULL) {
 | |
| 		result = USB_STOR_TRANSPORT_ERROR;
 | |
| 		goto error;
 | |
| 	}
 | |
| 
 | |
| 	US_DEBUGP("alauda_read_map: Mapping blocks for zone %d\n", zone);
 | |
| 
 | |
| 	/* 1024 PBA's per zone */
 | |
| 	for (i = 0; i < zonesize; i++)
 | |
| 		lba_to_pba[i] = pba_to_lba[i] = UNDEF;
 | |
| 
 | |
| 	for (i = 0; i < zonesize; i++) {
 | |
| 		blocknum = zone_base_pba + i;
 | |
| 
 | |
| 		result = alauda_get_redu_data(us, blocknum, data);
 | |
| 		if (result != USB_STOR_XFER_GOOD) {
 | |
| 			result = USB_STOR_TRANSPORT_ERROR;
 | |
| 			goto error;
 | |
| 		}
 | |
| 
 | |
| 		/* special PBAs have control field 0^16 */
 | |
| 		for (j = 0; j < 16; j++)
 | |
| 			if (data[j] != 0)
 | |
| 				goto nonz;
 | |
| 		pba_to_lba[i] = UNUSABLE;
 | |
| 		US_DEBUGP("alauda_read_map: PBA %d has no logical mapping\n", blocknum);
 | |
| 		continue;
 | |
| 
 | |
| 	nonz:
 | |
| 		/* unwritten PBAs have control field FF^16 */
 | |
| 		for (j = 0; j < 16; j++)
 | |
| 			if (data[j] != 0xff)
 | |
| 				goto nonff;
 | |
| 		continue;
 | |
| 
 | |
| 	nonff:
 | |
| 		/* normal PBAs start with six FFs */
 | |
| 		if (j < 6) {
 | |
| 			US_DEBUGP("alauda_read_map: PBA %d has no logical mapping: "
 | |
| 			       "reserved area = %02X%02X%02X%02X "
 | |
| 			       "data status %02X block status %02X\n",
 | |
| 			       blocknum, data[0], data[1], data[2], data[3],
 | |
| 			       data[4], data[5]);
 | |
| 			pba_to_lba[i] = UNUSABLE;
 | |
| 			continue;
 | |
| 		}
 | |
| 
 | |
| 		if ((data[6] >> 4) != 0x01) {
 | |
| 			US_DEBUGP("alauda_read_map: PBA %d has invalid address "
 | |
| 			       "field %02X%02X/%02X%02X\n",
 | |
| 			       blocknum, data[6], data[7], data[11], data[12]);
 | |
| 			pba_to_lba[i] = UNUSABLE;
 | |
| 			continue;
 | |
| 		}
 | |
| 
 | |
| 		/* check even parity */
 | |
| 		if (parity[data[6] ^ data[7]]) {
 | |
| 			printk(KERN_WARNING
 | |
| 			       "alauda_read_map: Bad parity in LBA for block %d"
 | |
| 			       " (%02X %02X)\n", i, data[6], data[7]);
 | |
| 			pba_to_lba[i] = UNUSABLE;
 | |
| 			continue;
 | |
| 		}
 | |
| 
 | |
| 		lba_offset = short_pack(data[7], data[6]);
 | |
| 		lba_offset = (lba_offset & 0x07FF) >> 1;
 | |
| 		lba_real = lba_offset + zone_base_lba;
 | |
| 
 | |
| 		/*
 | |
| 		 * Every 1024 physical blocks ("zone"), the LBA numbers
 | |
| 		 * go back to zero, but are within a higher block of LBA's.
 | |
| 		 * Also, there is a maximum of 1000 LBA's per zone.
 | |
| 		 * In other words, in PBA 1024-2047 you will find LBA 0-999
 | |
| 		 * which are really LBA 1000-1999. This allows for 24 bad
 | |
| 		 * or special physical blocks per zone.
 | |
| 		 */
 | |
| 
 | |
| 		if (lba_offset >= uzonesize) {
 | |
| 			printk(KERN_WARNING
 | |
| 			       "alauda_read_map: Bad low LBA %d for block %d\n",
 | |
| 			       lba_real, blocknum);
 | |
| 			continue;
 | |
| 		}
 | |
| 
 | |
| 		if (lba_to_pba[lba_offset] != UNDEF) {
 | |
| 			printk(KERN_WARNING
 | |
| 			       "alauda_read_map: "
 | |
| 			       "LBA %d seen for PBA %d and %d\n",
 | |
| 			       lba_real, lba_to_pba[lba_offset], blocknum);
 | |
| 			continue;
 | |
| 		}
 | |
| 
 | |
| 		pba_to_lba[i] = lba_real;
 | |
| 		lba_to_pba[lba_offset] = blocknum;
 | |
| 		continue;
 | |
| 	}
 | |
| 
 | |
| 	MEDIA_INFO(us).lba_to_pba[zone] = lba_to_pba;
 | |
| 	MEDIA_INFO(us).pba_to_lba[zone] = pba_to_lba;
 | |
| 	result = 0;
 | |
| 	goto out;
 | |
| 
 | |
| error:
 | |
| 	kfree(lba_to_pba);
 | |
| 	kfree(pba_to_lba);
 | |
| out:
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Checks to see whether we have already mapped a certain zone
 | |
|  * If we haven't, the map is generated
 | |
|  */
 | |
| static void alauda_ensure_map_for_zone(struct us_data *us, unsigned int zone)
 | |
| {
 | |
| 	if (MEDIA_INFO(us).lba_to_pba[zone] == NULL
 | |
| 		|| MEDIA_INFO(us).pba_to_lba[zone] == NULL)
 | |
| 		alauda_read_map(us, zone);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Erases an entire block
 | |
|  */
 | |
| static int alauda_erase_block(struct us_data *us, u16 pba)
 | |
| {
 | |
| 	int rc;
 | |
| 	unsigned char command[] = {
 | |
| 		ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba),
 | |
| 		PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, MEDIA_PORT(us)
 | |
| 	};
 | |
| 	unsigned char buf[2];
 | |
| 
 | |
| 	US_DEBUGP("alauda_erase_block: Erasing PBA %d\n", pba);
 | |
| 
 | |
| 	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
 | |
| 		command, 9, NULL);
 | |
| 	if (rc != USB_STOR_XFER_GOOD)
 | |
| 		return rc;
 | |
| 
 | |
| 	rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
 | |
| 		buf, 2, NULL);
 | |
| 	if (rc != USB_STOR_XFER_GOOD)
 | |
| 		return rc;
 | |
| 
 | |
| 	US_DEBUGP("alauda_erase_block: Erase result: %02X %02X\n",
 | |
| 		buf[0], buf[1]);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Reads data from a certain offset page inside a PBA, including interleaved
 | |
|  * redundancy data. Returns (pagesize+64)*pages bytes in data.
 | |
|  */
 | |
| static int alauda_read_block_raw(struct us_data *us, u16 pba,
 | |
| 		unsigned int page, unsigned int pages, unsigned char *data)
 | |
| {
 | |
| 	int rc;
 | |
| 	unsigned char command[] = {
 | |
| 		ALAUDA_BULK_CMD, ALAUDA_BULK_READ_BLOCK, PBA_HI(pba),
 | |
| 		PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us)
 | |
| 	};
 | |
| 
 | |
| 	US_DEBUGP("alauda_read_block: pba %d page %d count %d\n",
 | |
| 		pba, page, pages);
 | |
| 
 | |
| 	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
 | |
| 		command, 9, NULL);
 | |
| 	if (rc != USB_STOR_XFER_GOOD)
 | |
| 		return rc;
 | |
| 
 | |
| 	return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
 | |
| 		data, (MEDIA_INFO(us).pagesize + 64) * pages, NULL);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Reads data from a certain offset page inside a PBA, excluding redundancy
 | |
|  * data. Returns pagesize*pages bytes in data. Note that data must be big enough
 | |
|  * to hold (pagesize+64)*pages bytes of data, but you can ignore those 'extra'
 | |
|  * trailing bytes outside this function.
 | |
|  */
 | |
| static int alauda_read_block(struct us_data *us, u16 pba,
 | |
| 		unsigned int page, unsigned int pages, unsigned char *data)
 | |
| {
 | |
| 	int i, rc;
 | |
| 	unsigned int pagesize = MEDIA_INFO(us).pagesize;
 | |
| 
 | |
| 	rc = alauda_read_block_raw(us, pba, page, pages, data);
 | |
| 	if (rc != USB_STOR_XFER_GOOD)
 | |
| 		return rc;
 | |
| 
 | |
| 	/* Cut out the redundancy data */
 | |
| 	for (i = 0; i < pages; i++) {
 | |
| 		int dest_offset = i * pagesize;
 | |
| 		int src_offset = i * (pagesize + 64);
 | |
| 		memmove(data + dest_offset, data + src_offset, pagesize);
 | |
| 	}
 | |
| 
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Writes an entire block of data and checks status after write.
 | |
|  * Redundancy data must be already included in data. Data should be
 | |
|  * (pagesize+64)*blocksize bytes in length.
 | |
|  */
 | |
| static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data)
 | |
| {
 | |
| 	int rc;
 | |
| 	struct alauda_info *info = (struct alauda_info *) us->extra;
 | |
| 	unsigned char command[] = {
 | |
| 		ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_BLOCK, PBA_HI(pba),
 | |
| 		PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us)
 | |
| 	};
 | |
| 
 | |
| 	US_DEBUGP("alauda_write_block: pba %d\n", pba);
 | |
| 
 | |
| 	rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
 | |
| 		command, 9, NULL);
 | |
| 	if (rc != USB_STOR_XFER_GOOD)
 | |
| 		return rc;
 | |
| 
 | |
| 	rc = usb_stor_bulk_transfer_buf(us, info->wr_ep, data,
 | |
| 		(MEDIA_INFO(us).pagesize + 64) * MEDIA_INFO(us).blocksize,
 | |
| 		NULL);
 | |
| 	if (rc != USB_STOR_XFER_GOOD)
 | |
| 		return rc;
 | |
| 
 | |
| 	return alauda_check_status2(us);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Write some data to a specific LBA.
 | |
|  */
 | |
| static int alauda_write_lba(struct us_data *us, u16 lba,
 | |
| 		 unsigned int page, unsigned int pages,
 | |
| 		 unsigned char *ptr, unsigned char *blockbuffer)
 | |
| {
 | |
| 	u16 pba, lbap, new_pba;
 | |
| 	unsigned char *bptr, *cptr, *xptr;
 | |
| 	unsigned char ecc[3];
 | |
| 	int i, result;
 | |
| 	unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
 | |
| 	unsigned int zonesize = MEDIA_INFO(us).zonesize;
 | |
| 	unsigned int pagesize = MEDIA_INFO(us).pagesize;
 | |
| 	unsigned int blocksize = MEDIA_INFO(us).blocksize;
 | |
| 	unsigned int lba_offset = lba % uzonesize;
 | |
| 	unsigned int new_pba_offset;
 | |
| 	unsigned int zone = lba / uzonesize;
 | |
| 
 | |
| 	alauda_ensure_map_for_zone(us, zone);
 | |
| 
 | |
| 	pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
 | |
| 	if (pba == 1) {
 | |
| 		/* Maybe it is impossible to write to PBA 1.
 | |
| 		   Fake success, but don't do anything. */
 | |
| 		printk(KERN_WARNING
 | |
| 		       "alauda_write_lba: avoid writing to pba 1\n");
 | |
| 		return USB_STOR_TRANSPORT_GOOD;
 | |
| 	}
 | |
| 
 | |
| 	new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone);
 | |
| 	if (!new_pba) {
 | |
| 		printk(KERN_WARNING
 | |
| 		       "alauda_write_lba: Out of unused blocks\n");
 | |
| 		return USB_STOR_TRANSPORT_ERROR;
 | |
| 	}
 | |
| 
 | |
| 	/* read old contents */
 | |
| 	if (pba != UNDEF) {
 | |
| 		result = alauda_read_block_raw(us, pba, 0,
 | |
| 			blocksize, blockbuffer);
 | |
| 		if (result != USB_STOR_XFER_GOOD)
 | |
| 			return result;
 | |
| 	} else {
 | |
| 		memset(blockbuffer, 0, blocksize * (pagesize + 64));
 | |
| 	}
 | |
| 
 | |
| 	lbap = (lba_offset << 1) | 0x1000;
 | |
| 	if (parity[MSB_of(lbap) ^ LSB_of(lbap)])
 | |
| 		lbap ^= 1;
 | |
| 
 | |
| 	/* check old contents and fill lba */
 | |
| 	for (i = 0; i < blocksize; i++) {
 | |
| 		bptr = blockbuffer + (i * (pagesize + 64));
 | |
| 		cptr = bptr + pagesize;
 | |
| 		nand_compute_ecc(bptr, ecc);
 | |
| 		if (!nand_compare_ecc(cptr+13, ecc)) {
 | |
| 			US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n",
 | |
| 				  i, pba);
 | |
| 			nand_store_ecc(cptr+13, ecc);
 | |
| 		}
 | |
| 		nand_compute_ecc(bptr + (pagesize / 2), ecc);
 | |
| 		if (!nand_compare_ecc(cptr+8, ecc)) {
 | |
| 			US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n",
 | |
| 				  i, pba);
 | |
| 			nand_store_ecc(cptr+8, ecc);
 | |
| 		}
 | |
| 		cptr[6] = cptr[11] = MSB_of(lbap);
 | |
| 		cptr[7] = cptr[12] = LSB_of(lbap);
 | |
| 	}
 | |
| 
 | |
| 	/* copy in new stuff and compute ECC */
 | |
| 	xptr = ptr;
 | |
| 	for (i = page; i < page+pages; i++) {
 | |
| 		bptr = blockbuffer + (i * (pagesize + 64));
 | |
| 		cptr = bptr + pagesize;
 | |
| 		memcpy(bptr, xptr, pagesize);
 | |
| 		xptr += pagesize;
 | |
| 		nand_compute_ecc(bptr, ecc);
 | |
| 		nand_store_ecc(cptr+13, ecc);
 | |
| 		nand_compute_ecc(bptr + (pagesize / 2), ecc);
 | |
| 		nand_store_ecc(cptr+8, ecc);
 | |
| 	}
 | |
| 
 | |
| 	result = alauda_write_block(us, new_pba, blockbuffer);
 | |
| 	if (result != USB_STOR_XFER_GOOD)
 | |
| 		return result;
 | |
| 
 | |
| 	new_pba_offset = new_pba - (zone * zonesize);
 | |
| 	MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba;
 | |
| 	MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba;
 | |
| 	US_DEBUGP("alauda_write_lba: Remapped LBA %d to PBA %d\n",
 | |
| 		lba, new_pba);
 | |
| 
 | |
| 	if (pba != UNDEF) {
 | |
| 		unsigned int pba_offset = pba - (zone * zonesize);
 | |
| 		result = alauda_erase_block(us, pba);
 | |
| 		if (result != USB_STOR_XFER_GOOD)
 | |
| 			return result;
 | |
| 		MEDIA_INFO(us).pba_to_lba[zone][pba_offset] = UNDEF;
 | |
| 	}
 | |
| 
 | |
| 	return USB_STOR_TRANSPORT_GOOD;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Read data from a specific sector address
 | |
|  */
 | |
| static int alauda_read_data(struct us_data *us, unsigned long address,
 | |
| 		unsigned int sectors)
 | |
| {
 | |
| 	unsigned char *buffer;
 | |
| 	u16 lba, max_lba;
 | |
| 	unsigned int page, len, offset;
 | |
| 	unsigned int blockshift = MEDIA_INFO(us).blockshift;
 | |
| 	unsigned int pageshift = MEDIA_INFO(us).pageshift;
 | |
| 	unsigned int blocksize = MEDIA_INFO(us).blocksize;
 | |
| 	unsigned int pagesize = MEDIA_INFO(us).pagesize;
 | |
| 	unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
 | |
| 	struct scatterlist *sg;
 | |
| 	int result;
 | |
| 
 | |
| 	/*
 | |
| 	 * Since we only read in one block at a time, we have to create
 | |
| 	 * a bounce buffer and move the data a piece at a time between the
 | |
| 	 * bounce buffer and the actual transfer buffer.
 | |
| 	 * We make this buffer big enough to hold temporary redundancy data,
 | |
| 	 * which we use when reading the data blocks.
 | |
| 	 */
 | |
| 
 | |
| 	len = min(sectors, blocksize) * (pagesize + 64);
 | |
| 	buffer = kmalloc(len, GFP_NOIO);
 | |
| 	if (buffer == NULL) {
 | |
| 		printk(KERN_WARNING "alauda_read_data: Out of memory\n");
 | |
| 		return USB_STOR_TRANSPORT_ERROR;
 | |
| 	}
 | |
| 
 | |
| 	/* Figure out the initial LBA and page */
 | |
| 	lba = address >> blockshift;
 | |
| 	page = (address & MEDIA_INFO(us).blockmask);
 | |
| 	max_lba = MEDIA_INFO(us).capacity >> (blockshift + pageshift);
 | |
| 
 | |
| 	result = USB_STOR_TRANSPORT_GOOD;
 | |
| 	offset = 0;
 | |
| 	sg = NULL;
 | |
| 
 | |
| 	while (sectors > 0) {
 | |
| 		unsigned int zone = lba / uzonesize; /* integer division */
 | |
| 		unsigned int lba_offset = lba - (zone * uzonesize);
 | |
| 		unsigned int pages;
 | |
| 		u16 pba;
 | |
| 		alauda_ensure_map_for_zone(us, zone);
 | |
| 
 | |
| 		/* Not overflowing capacity? */
 | |
| 		if (lba >= max_lba) {
 | |
| 			US_DEBUGP("Error: Requested lba %u exceeds "
 | |
| 				  "maximum %u\n", lba, max_lba);
 | |
| 			result = USB_STOR_TRANSPORT_ERROR;
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		/* Find number of pages we can read in this block */
 | |
| 		pages = min(sectors, blocksize - page);
 | |
| 		len = pages << pageshift;
 | |
| 
 | |
| 		/* Find where this lba lives on disk */
 | |
| 		pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
 | |
| 
 | |
| 		if (pba == UNDEF) {	/* this lba was never written */
 | |
| 			US_DEBUGP("Read %d zero pages (LBA %d) page %d\n",
 | |
| 				  pages, lba, page);
 | |
| 
 | |
| 			/* This is not really an error. It just means
 | |
| 			   that the block has never been written.
 | |
| 			   Instead of returning USB_STOR_TRANSPORT_ERROR
 | |
| 			   it is better to return all zero data. */
 | |
| 
 | |
| 			memset(buffer, 0, len);
 | |
| 		} else {
 | |
| 			US_DEBUGP("Read %d pages, from PBA %d"
 | |
| 				  " (LBA %d) page %d\n",
 | |
| 				  pages, pba, lba, page);
 | |
| 
 | |
| 			result = alauda_read_block(us, pba, page, pages, buffer);
 | |
| 			if (result != USB_STOR_TRANSPORT_GOOD)
 | |
| 				break;
 | |
| 		}
 | |
| 
 | |
| 		/* Store the data in the transfer buffer */
 | |
| 		usb_stor_access_xfer_buf(buffer, len, us->srb,
 | |
| 				&sg, &offset, TO_XFER_BUF);
 | |
| 
 | |
| 		page = 0;
 | |
| 		lba++;
 | |
| 		sectors -= pages;
 | |
| 	}
 | |
| 
 | |
| 	kfree(buffer);
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Write data to a specific sector address
 | |
|  */
 | |
| static int alauda_write_data(struct us_data *us, unsigned long address,
 | |
| 		unsigned int sectors)
 | |
| {
 | |
| 	unsigned char *buffer, *blockbuffer;
 | |
| 	unsigned int page, len, offset;
 | |
| 	unsigned int blockshift = MEDIA_INFO(us).blockshift;
 | |
| 	unsigned int pageshift = MEDIA_INFO(us).pageshift;
 | |
| 	unsigned int blocksize = MEDIA_INFO(us).blocksize;
 | |
| 	unsigned int pagesize = MEDIA_INFO(us).pagesize;
 | |
| 	struct scatterlist *sg;
 | |
| 	u16 lba, max_lba;
 | |
| 	int result;
 | |
| 
 | |
| 	/*
 | |
| 	 * Since we don't write the user data directly to the device,
 | |
| 	 * we have to create a bounce buffer and move the data a piece
 | |
| 	 * at a time between the bounce buffer and the actual transfer buffer.
 | |
| 	 */
 | |
| 
 | |
| 	len = min(sectors, blocksize) * pagesize;
 | |
| 	buffer = kmalloc(len, GFP_NOIO);
 | |
| 	if (buffer == NULL) {
 | |
| 		printk(KERN_WARNING "alauda_write_data: Out of memory\n");
 | |
| 		return USB_STOR_TRANSPORT_ERROR;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * We also need a temporary block buffer, where we read in the old data,
 | |
| 	 * overwrite parts with the new data, and manipulate the redundancy data
 | |
| 	 */
 | |
| 	blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO);
 | |
| 	if (blockbuffer == NULL) {
 | |
| 		printk(KERN_WARNING "alauda_write_data: Out of memory\n");
 | |
| 		kfree(buffer);
 | |
| 		return USB_STOR_TRANSPORT_ERROR;
 | |
| 	}
 | |
| 
 | |
| 	/* Figure out the initial LBA and page */
 | |
| 	lba = address >> blockshift;
 | |
| 	page = (address & MEDIA_INFO(us).blockmask);
 | |
| 	max_lba = MEDIA_INFO(us).capacity >> (pageshift + blockshift);
 | |
| 
 | |
| 	result = USB_STOR_TRANSPORT_GOOD;
 | |
| 	offset = 0;
 | |
| 	sg = NULL;
 | |
| 
 | |
| 	while (sectors > 0) {
 | |
| 		/* Write as many sectors as possible in this block */
 | |
| 		unsigned int pages = min(sectors, blocksize - page);
 | |
| 		len = pages << pageshift;
 | |
| 
 | |
| 		/* Not overflowing capacity? */
 | |
| 		if (lba >= max_lba) {
 | |
| 			US_DEBUGP("alauda_write_data: Requested lba %u exceeds "
 | |
| 				  "maximum %u\n", lba, max_lba);
 | |
| 			result = USB_STOR_TRANSPORT_ERROR;
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		/* Get the data from the transfer buffer */
 | |
| 		usb_stor_access_xfer_buf(buffer, len, us->srb,
 | |
| 				&sg, &offset, FROM_XFER_BUF);
 | |
| 
 | |
| 		result = alauda_write_lba(us, lba, page, pages, buffer,
 | |
| 			blockbuffer);
 | |
| 		if (result != USB_STOR_TRANSPORT_GOOD)
 | |
| 			break;
 | |
| 
 | |
| 		page = 0;
 | |
| 		lba++;
 | |
| 		sectors -= pages;
 | |
| 	}
 | |
| 
 | |
| 	kfree(buffer);
 | |
| 	kfree(blockbuffer);
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Our interface with the rest of the world
 | |
|  */
 | |
| 
 | |
| static void alauda_info_destructor(void *extra)
 | |
| {
 | |
| 	struct alauda_info *info = (struct alauda_info *) extra;
 | |
| 	int port;
 | |
| 
 | |
| 	if (!info)
 | |
| 		return;
 | |
| 
 | |
| 	for (port = 0; port < 2; port++) {
 | |
| 		struct alauda_media_info *media_info = &info->port[port];
 | |
| 
 | |
| 		alauda_free_maps(media_info);
 | |
| 		kfree(media_info->lba_to_pba);
 | |
| 		kfree(media_info->pba_to_lba);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Initialize alauda_info struct and find the data-write endpoint
 | |
|  */
 | |
| static int init_alauda(struct us_data *us)
 | |
| {
 | |
| 	struct alauda_info *info;
 | |
| 	struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting;
 | |
| 	nand_init_ecc();
 | |
| 
 | |
| 	us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO);
 | |
| 	if (!us->extra) {
 | |
| 		US_DEBUGP("init_alauda: Gah! Can't allocate storage for"
 | |
| 			"alauda info struct!\n");
 | |
| 		return USB_STOR_TRANSPORT_ERROR;
 | |
| 	}
 | |
| 	info = (struct alauda_info *) us->extra;
 | |
| 	us->extra_destructor = alauda_info_destructor;
 | |
| 
 | |
| 	info->wr_ep = usb_sndbulkpipe(us->pusb_dev,
 | |
| 		altsetting->endpoint[0].desc.bEndpointAddress
 | |
| 		& USB_ENDPOINT_NUMBER_MASK);
 | |
| 
 | |
| 	return USB_STOR_TRANSPORT_GOOD;
 | |
| }
 | |
| 
 | |
| static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
 | |
| {
 | |
| 	int rc;
 | |
| 	struct alauda_info *info = (struct alauda_info *) us->extra;
 | |
| 	unsigned char *ptr = us->iobuf;
 | |
| 	static unsigned char inquiry_response[36] = {
 | |
| 		0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
 | |
| 	};
 | |
| 
 | |
| 	if (srb->cmnd[0] == INQUIRY) {
 | |
| 		US_DEBUGP("alauda_transport: INQUIRY. "
 | |
| 			"Returning bogus response.\n");
 | |
| 		memcpy(ptr, inquiry_response, sizeof(inquiry_response));
 | |
| 		fill_inquiry_response(us, ptr, 36);
 | |
| 		return USB_STOR_TRANSPORT_GOOD;
 | |
| 	}
 | |
| 
 | |
| 	if (srb->cmnd[0] == TEST_UNIT_READY) {
 | |
| 		US_DEBUGP("alauda_transport: TEST_UNIT_READY.\n");
 | |
| 		return alauda_check_media(us);
 | |
| 	}
 | |
| 
 | |
| 	if (srb->cmnd[0] == READ_CAPACITY) {
 | |
| 		unsigned int num_zones;
 | |
| 		unsigned long capacity;
 | |
| 
 | |
| 		rc = alauda_check_media(us);
 | |
| 		if (rc != USB_STOR_TRANSPORT_GOOD)
 | |
| 			return rc;
 | |
| 
 | |
| 		num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
 | |
| 			+ MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
 | |
| 
 | |
| 		capacity = num_zones * MEDIA_INFO(us).uzonesize
 | |
| 			* MEDIA_INFO(us).blocksize;
 | |
| 
 | |
| 		/* Report capacity and page size */
 | |
| 		((__be32 *) ptr)[0] = cpu_to_be32(capacity - 1);
 | |
| 		((__be32 *) ptr)[1] = cpu_to_be32(512);
 | |
| 
 | |
| 		usb_stor_set_xfer_buf(ptr, 8, srb);
 | |
| 		return USB_STOR_TRANSPORT_GOOD;
 | |
| 	}
 | |
| 
 | |
| 	if (srb->cmnd[0] == READ_10) {
 | |
| 		unsigned int page, pages;
 | |
| 
 | |
| 		rc = alauda_check_media(us);
 | |
| 		if (rc != USB_STOR_TRANSPORT_GOOD)
 | |
| 			return rc;
 | |
| 
 | |
| 		page = short_pack(srb->cmnd[3], srb->cmnd[2]);
 | |
| 		page <<= 16;
 | |
| 		page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
 | |
| 		pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
 | |
| 
 | |
| 		US_DEBUGP("alauda_transport: READ_10: page %d pagect %d\n",
 | |
| 			  page, pages);
 | |
| 
 | |
| 		return alauda_read_data(us, page, pages);
 | |
| 	}
 | |
| 
 | |
| 	if (srb->cmnd[0] == WRITE_10) {
 | |
| 		unsigned int page, pages;
 | |
| 
 | |
| 		rc = alauda_check_media(us);
 | |
| 		if (rc != USB_STOR_TRANSPORT_GOOD)
 | |
| 			return rc;
 | |
| 
 | |
| 		page = short_pack(srb->cmnd[3], srb->cmnd[2]);
 | |
| 		page <<= 16;
 | |
| 		page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
 | |
| 		pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
 | |
| 
 | |
| 		US_DEBUGP("alauda_transport: WRITE_10: page %d pagect %d\n",
 | |
| 			  page, pages);
 | |
| 
 | |
| 		return alauda_write_data(us, page, pages);
 | |
| 	}
 | |
| 
 | |
| 	if (srb->cmnd[0] == REQUEST_SENSE) {
 | |
| 		US_DEBUGP("alauda_transport: REQUEST_SENSE.\n");
 | |
| 
 | |
| 		memset(ptr, 0, 18);
 | |
| 		ptr[0] = 0xF0;
 | |
| 		ptr[2] = info->sense_key;
 | |
| 		ptr[7] = 11;
 | |
| 		ptr[12] = info->sense_asc;
 | |
| 		ptr[13] = info->sense_ascq;
 | |
| 		usb_stor_set_xfer_buf(ptr, 18, srb);
 | |
| 
 | |
| 		return USB_STOR_TRANSPORT_GOOD;
 | |
| 	}
 | |
| 
 | |
| 	if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
 | |
| 		/* sure.  whatever.  not like we can stop the user from popping
 | |
| 		   the media out of the device (no locking doors, etc) */
 | |
| 		return USB_STOR_TRANSPORT_GOOD;
 | |
| 	}
 | |
| 
 | |
| 	US_DEBUGP("alauda_transport: Gah! Unknown command: %d (0x%x)\n",
 | |
| 		srb->cmnd[0], srb->cmnd[0]);
 | |
| 	info->sense_key = 0x05;
 | |
| 	info->sense_asc = 0x20;
 | |
| 	info->sense_ascq = 0x00;
 | |
| 	return USB_STOR_TRANSPORT_FAILED;
 | |
| }
 | |
| 
 | |
| static int alauda_probe(struct usb_interface *intf,
 | |
| 			 const struct usb_device_id *id)
 | |
| {
 | |
| 	struct us_data *us;
 | |
| 	int result;
 | |
| 
 | |
| 	result = usb_stor_probe1(&us, intf, id,
 | |
| 			(id - alauda_usb_ids) + alauda_unusual_dev_list);
 | |
| 	if (result)
 | |
| 		return result;
 | |
| 
 | |
| 	us->transport_name  = "Alauda Control/Bulk";
 | |
| 	us->transport = alauda_transport;
 | |
| 	us->transport_reset = usb_stor_Bulk_reset;
 | |
| 	us->max_lun = 1;
 | |
| 
 | |
| 	result = usb_stor_probe2(us);
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| static struct usb_driver alauda_driver = {
 | |
| 	.name =		"ums-alauda",
 | |
| 	.probe =	alauda_probe,
 | |
| 	.disconnect =	usb_stor_disconnect,
 | |
| 	.suspend =	usb_stor_suspend,
 | |
| 	.resume =	usb_stor_resume,
 | |
| 	.reset_resume =	usb_stor_reset_resume,
 | |
| 	.pre_reset =	usb_stor_pre_reset,
 | |
| 	.post_reset =	usb_stor_post_reset,
 | |
| 	.id_table =	alauda_usb_ids,
 | |
| 	.soft_unbind =	1,
 | |
| };
 | |
| 
 | |
| static int __init alauda_init(void)
 | |
| {
 | |
| 	return usb_register(&alauda_driver);
 | |
| }
 | |
| 
 | |
| static void __exit alauda_exit(void)
 | |
| {
 | |
| 	usb_deregister(&alauda_driver);
 | |
| }
 | |
| 
 | |
| module_init(alauda_init);
 | |
| module_exit(alauda_exit);
 |