mirror of
				https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
				synced 2025-10-31 06:18:54 +00:00 
			
		
		
		
	 6acc81c394
			
		
	
	
		6acc81c394
		
	
	
	
	
		
			
			Add support for CMOS Sensor Interface on i.MX1 and i.MXL SoCs. create mode 100644 arch/arm/mach-mx1/ksym_mx1.c create mode 100644 arch/arm/mach-mx1/mx1_camera_fiq.S create mode 100644 arch/arm/plat-mxc/include/mach/mx1_camera.h create mode 100644 drivers/media/video/mx1_camera.c Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
		
			
				
	
	
		
			828 lines
		
	
	
		
			20 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			828 lines
		
	
	
		
			20 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * V4L2 Driver for i.MXL/i.MXL camera (CSI) host
 | |
|  *
 | |
|  * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
 | |
|  * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
 | |
|  *
 | |
|  * Based on PXA SoC camera driver
 | |
|  * Copyright (C) 2006, Sascha Hauer, Pengutronix
 | |
|  * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or modify
 | |
|  * it under the terms of the GNU General Public License version 2 as
 | |
|  * published by the Free Software Foundation.
 | |
|  */
 | |
| 
 | |
| #include <linux/clk.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/device.h>
 | |
| #include <linux/dma-mapping.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/fs.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/io.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/mm.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/moduleparam.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/time.h>
 | |
| #include <linux/version.h>
 | |
| #include <linux/videodev2.h>
 | |
| 
 | |
| #include <media/soc_camera.h>
 | |
| #include <media/v4l2-common.h>
 | |
| #include <media/v4l2-dev.h>
 | |
| #include <media/videobuf-dma-contig.h>
 | |
| 
 | |
| #include <asm/dma.h>
 | |
| #include <asm/fiq.h>
 | |
| #include <mach/dma-mx1-mx2.h>
 | |
| #include <mach/hardware.h>
 | |
| #include <mach/mx1_camera.h>
 | |
| 
 | |
| /*
 | |
|  * CSI registers
 | |
|  */
 | |
| #define DMA_CCR(x)	(0x8c + ((x) << 6))	/* Control Registers */
 | |
| #define DMA_DIMR	0x08			/* Interrupt mask Register */
 | |
| #define CSICR1		0x00			/* CSI Control Register 1 */
 | |
| #define CSISR		0x08			/* CSI Status Register */
 | |
| #define CSIRXR		0x10			/* CSI RxFIFO Register */
 | |
| 
 | |
| #define CSICR1_RXFF_LEVEL(x)	(((x) & 0x3) << 19)
 | |
| #define CSICR1_SOF_POL		(1 << 17)
 | |
| #define CSICR1_SOF_INTEN	(1 << 16)
 | |
| #define CSICR1_MCLKDIV(x)	(((x) & 0xf) << 12)
 | |
| #define CSICR1_MCLKEN		(1 << 9)
 | |
| #define CSICR1_FCC		(1 << 8)
 | |
| #define CSICR1_BIG_ENDIAN	(1 << 7)
 | |
| #define CSICR1_CLR_RXFIFO	(1 << 5)
 | |
| #define CSICR1_GCLK_MODE	(1 << 4)
 | |
| #define CSICR1_DATA_POL		(1 << 2)
 | |
| #define CSICR1_REDGE		(1 << 1)
 | |
| #define CSICR1_EN		(1 << 0)
 | |
| 
 | |
| #define CSISR_SFF_OR_INT	(1 << 25)
 | |
| #define CSISR_RFF_OR_INT	(1 << 24)
 | |
| #define CSISR_STATFF_INT	(1 << 21)
 | |
| #define CSISR_RXFF_INT		(1 << 18)
 | |
| #define CSISR_SOF_INT		(1 << 16)
 | |
| #define CSISR_DRDY		(1 << 0)
 | |
| 
 | |
| #define VERSION_CODE KERNEL_VERSION(0, 0, 1)
 | |
| #define DRIVER_NAME "mx1-camera"
 | |
| 
 | |
| #define CSI_IRQ_MASK	(CSISR_SFF_OR_INT | CSISR_RFF_OR_INT | \
 | |
| 			CSISR_STATFF_INT | CSISR_RXFF_INT | CSISR_SOF_INT)
 | |
| 
 | |
| #define CSI_BUS_FLAGS	(SOCAM_MASTER | SOCAM_HSYNC_ACTIVE_HIGH | \
 | |
| 			SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW | \
 | |
| 			SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | \
 | |
| 			SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_LOW | \
 | |
| 			SOCAM_DATAWIDTH_8)
 | |
| 
 | |
| #define MAX_VIDEO_MEM 16	/* Video memory limit in megabytes */
 | |
| 
 | |
| /*
 | |
|  * Structures
 | |
|  */
 | |
| 
 | |
| /* buffer for one video frame */
 | |
| struct mx1_buffer {
 | |
| 	/* common v4l buffer stuff -- must be first */
 | |
| 	struct videobuf_buffer vb;
 | |
| 	const struct soc_camera_data_format *fmt;
 | |
| 	int inwork;
 | |
| };
 | |
| 
 | |
| /* i.MX1/i.MXL is only supposed to handle one camera on its Camera Sensor
 | |
|  * Interface. If anyone ever builds hardware to enable more than
 | |
|  * one camera, they will have to modify this driver too */
 | |
| struct mx1_camera_dev {
 | |
| 	struct soc_camera_device	*icd;
 | |
| 	struct mx1_camera_pdata		*pdata;
 | |
| 	struct mx1_buffer		*active;
 | |
| 	struct device			*dev;
 | |
| 	struct resource			*res;
 | |
| 	struct clk			*clk;
 | |
| 	struct list_head		capture;
 | |
| 
 | |
| 	void __iomem			*base;
 | |
| 	int				dma_chan;
 | |
| 	unsigned int			irq;
 | |
| 	unsigned long			mclk;
 | |
| 
 | |
| 	spinlock_t			lock;
 | |
| };
 | |
| 
 | |
| /*
 | |
|  *  Videobuf operations
 | |
|  */
 | |
| static int mx1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
 | |
| 			      unsigned int *size)
 | |
| {
 | |
| 	struct soc_camera_device *icd = vq->priv_data;
 | |
| 
 | |
| 	*size = icd->width * icd->height *
 | |
| 		((icd->current_fmt->depth + 7) >> 3);
 | |
| 
 | |
| 	if (!*count)
 | |
| 		*count = 32;
 | |
| 
 | |
| 	while (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
 | |
| 		(*count)--;
 | |
| 
 | |
| 	dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void free_buffer(struct videobuf_queue *vq, struct mx1_buffer *buf)
 | |
| {
 | |
| 	struct soc_camera_device *icd = vq->priv_data;
 | |
| 	struct videobuf_buffer *vb = &buf->vb;
 | |
| 
 | |
| 	BUG_ON(in_interrupt());
 | |
| 
 | |
| 	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 | |
| 		vb, vb->baddr, vb->bsize);
 | |
| 
 | |
| 	/* This waits until this buffer is out of danger, i.e., until it is no
 | |
| 	 * longer in STATE_QUEUED or STATE_ACTIVE */
 | |
| 	videobuf_waiton(vb, 0, 0);
 | |
| 	videobuf_dma_contig_free(vq, vb);
 | |
| 
 | |
| 	vb->state = VIDEOBUF_NEEDS_INIT;
 | |
| }
 | |
| 
 | |
| static int mx1_videobuf_prepare(struct videobuf_queue *vq,
 | |
| 		struct videobuf_buffer *vb, enum v4l2_field field)
 | |
| {
 | |
| 	struct soc_camera_device *icd = vq->priv_data;
 | |
| 	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
 | |
| 	int ret;
 | |
| 
 | |
| 	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 | |
| 		vb, vb->baddr, vb->bsize);
 | |
| 
 | |
| 	/* Added list head initialization on alloc */
 | |
| 	WARN_ON(!list_empty(&vb->queue));
 | |
| 
 | |
| 	BUG_ON(NULL == icd->current_fmt);
 | |
| 
 | |
| 	/* I think, in buf_prepare you only have to protect global data,
 | |
| 	 * the actual buffer is yours */
 | |
| 	buf->inwork = 1;
 | |
| 
 | |
| 	if (buf->fmt	!= icd->current_fmt ||
 | |
| 	    vb->width	!= icd->width ||
 | |
| 	    vb->height	!= icd->height ||
 | |
| 	    vb->field	!= field) {
 | |
| 		buf->fmt	= icd->current_fmt;
 | |
| 		vb->width	= icd->width;
 | |
| 		vb->height	= icd->height;
 | |
| 		vb->field	= field;
 | |
| 		vb->state	= VIDEOBUF_NEEDS_INIT;
 | |
| 	}
 | |
| 
 | |
| 	vb->size = vb->width * vb->height * ((buf->fmt->depth + 7) >> 3);
 | |
| 	if (0 != vb->baddr && vb->bsize < vb->size) {
 | |
| 		ret = -EINVAL;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	if (vb->state == VIDEOBUF_NEEDS_INIT) {
 | |
| 		ret = videobuf_iolock(vq, vb, NULL);
 | |
| 		if (ret)
 | |
| 			goto fail;
 | |
| 
 | |
| 		vb->state = VIDEOBUF_PREPARED;
 | |
| 	}
 | |
| 
 | |
| 	buf->inwork = 0;
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| fail:
 | |
| 	free_buffer(vq, buf);
 | |
| out:
 | |
| 	buf->inwork = 0;
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
 | |
| {
 | |
| 	struct videobuf_buffer *vbuf = &pcdev->active->vb;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (unlikely(!pcdev->active)) {
 | |
| 		dev_err(pcdev->dev, "DMA End IRQ with no active buffer\n");
 | |
| 		return -EFAULT;
 | |
| 	}
 | |
| 
 | |
| 	/* setup sg list for future DMA */
 | |
| 	ret = imx_dma_setup_single(pcdev->dma_chan,
 | |
| 		videobuf_to_dma_contig(vbuf),
 | |
| 		vbuf->size, pcdev->res->start +
 | |
| 		CSIRXR, DMA_MODE_READ);
 | |
| 	if (unlikely(ret))
 | |
| 		dev_err(pcdev->dev, "Failed to setup DMA sg list\n");
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void mx1_videobuf_queue(struct videobuf_queue *vq,
 | |
| 						struct videobuf_buffer *vb)
 | |
| {
 | |
| 	struct soc_camera_device *icd = vq->priv_data;
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 | |
| 	struct mx1_camera_dev *pcdev = ici->priv;
 | |
| 	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 | |
| 		vb, vb->baddr, vb->bsize);
 | |
| 
 | |
| 	spin_lock_irqsave(&pcdev->lock, flags);
 | |
| 
 | |
| 	list_add_tail(&vb->queue, &pcdev->capture);
 | |
| 
 | |
| 	vb->state = VIDEOBUF_ACTIVE;
 | |
| 
 | |
| 	if (!pcdev->active) {
 | |
| 		pcdev->active = buf;
 | |
| 
 | |
| 		/* setup sg list for future DMA */
 | |
| 		if (!mx1_camera_setup_dma(pcdev)) {
 | |
| 			unsigned int temp;
 | |
| 			/* enable SOF irq */
 | |
| 			temp = __raw_readl(pcdev->base + CSICR1) |
 | |
| 							CSICR1_SOF_INTEN;
 | |
| 			__raw_writel(temp, pcdev->base + CSICR1);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	spin_unlock_irqrestore(&pcdev->lock, flags);
 | |
| }
 | |
| 
 | |
| static void mx1_videobuf_release(struct videobuf_queue *vq,
 | |
| 				 struct videobuf_buffer *vb)
 | |
| {
 | |
| 	struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
 | |
| #ifdef DEBUG
 | |
| 	struct soc_camera_device *icd = vq->priv_data;
 | |
| 
 | |
| 	dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 | |
| 		vb, vb->baddr, vb->bsize);
 | |
| 
 | |
| 	switch (vb->state) {
 | |
| 	case VIDEOBUF_ACTIVE:
 | |
| 		dev_dbg(&icd->dev, "%s (active)\n", __func__);
 | |
| 		break;
 | |
| 	case VIDEOBUF_QUEUED:
 | |
| 		dev_dbg(&icd->dev, "%s (queued)\n", __func__);
 | |
| 		break;
 | |
| 	case VIDEOBUF_PREPARED:
 | |
| 		dev_dbg(&icd->dev, "%s (prepared)\n", __func__);
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_dbg(&icd->dev, "%s (unknown)\n", __func__);
 | |
| 		break;
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| 	free_buffer(vq, buf);
 | |
| }
 | |
| 
 | |
| static void mx1_camera_wakeup(struct mx1_camera_dev *pcdev,
 | |
| 			      struct videobuf_buffer *vb,
 | |
| 			      struct mx1_buffer *buf)
 | |
| {
 | |
| 	/* _init is used to debug races, see comment in mx1_camera_reqbufs() */
 | |
| 	list_del_init(&vb->queue);
 | |
| 	vb->state = VIDEOBUF_DONE;
 | |
| 	do_gettimeofday(&vb->ts);
 | |
| 	vb->field_count++;
 | |
| 	wake_up(&vb->done);
 | |
| 
 | |
| 	if (list_empty(&pcdev->capture)) {
 | |
| 		pcdev->active = NULL;
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	pcdev->active = list_entry(pcdev->capture.next,
 | |
| 				   struct mx1_buffer, vb.queue);
 | |
| 
 | |
| 	/* setup sg list for future DMA */
 | |
| 	if (likely(!mx1_camera_setup_dma(pcdev))) {
 | |
| 		unsigned int temp;
 | |
| 
 | |
| 		/* enable SOF irq */
 | |
| 		temp = __raw_readl(pcdev->base + CSICR1) | CSICR1_SOF_INTEN;
 | |
| 		__raw_writel(temp, pcdev->base + CSICR1);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void mx1_camera_dma_irq(int channel, void *data)
 | |
| {
 | |
| 	struct mx1_camera_dev *pcdev = data;
 | |
| 	struct mx1_buffer *buf;
 | |
| 	struct videobuf_buffer *vb;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	spin_lock_irqsave(&pcdev->lock, flags);
 | |
| 
 | |
| 	imx_dma_disable(channel);
 | |
| 
 | |
| 	if (unlikely(!pcdev->active)) {
 | |
| 		dev_err(pcdev->dev, "DMA End IRQ with no active buffer\n");
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	vb = &pcdev->active->vb;
 | |
| 	buf = container_of(vb, struct mx1_buffer, vb);
 | |
| 	WARN_ON(buf->inwork || list_empty(&vb->queue));
 | |
| 	dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
 | |
| 		vb, vb->baddr, vb->bsize);
 | |
| 
 | |
| 	mx1_camera_wakeup(pcdev, vb, buf);
 | |
| out:
 | |
| 	spin_unlock_irqrestore(&pcdev->lock, flags);
 | |
| }
 | |
| 
 | |
| static struct videobuf_queue_ops mx1_videobuf_ops = {
 | |
| 	.buf_setup	= mx1_videobuf_setup,
 | |
| 	.buf_prepare	= mx1_videobuf_prepare,
 | |
| 	.buf_queue	= mx1_videobuf_queue,
 | |
| 	.buf_release	= mx1_videobuf_release,
 | |
| };
 | |
| 
 | |
| static void mx1_camera_init_videobuf(struct videobuf_queue *q,
 | |
| 				     struct soc_camera_device *icd)
 | |
| {
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 | |
| 	struct mx1_camera_dev *pcdev = ici->priv;
 | |
| 
 | |
| 	videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, pcdev->dev,
 | |
| 					&pcdev->lock,
 | |
| 					V4L2_BUF_TYPE_VIDEO_CAPTURE,
 | |
| 					V4L2_FIELD_NONE,
 | |
| 					sizeof(struct mx1_buffer), icd);
 | |
| }
 | |
| 
 | |
| static int mclk_get_divisor(struct mx1_camera_dev *pcdev)
 | |
| {
 | |
| 	unsigned int mclk = pcdev->mclk;
 | |
| 	unsigned long div;
 | |
| 	unsigned long lcdclk;
 | |
| 
 | |
| 	lcdclk = clk_get_rate(pcdev->clk);
 | |
| 
 | |
| 	/* We verify platform_mclk_10khz != 0, so if anyone breaks it, here
 | |
| 	 * they get a nice Oops */
 | |
| 	div = (lcdclk + 2 * mclk - 1) / (2 * mclk) - 1;
 | |
| 
 | |
| 	dev_dbg(pcdev->dev, "System clock %lukHz, target freq %dkHz, "
 | |
| 		"divisor %lu\n", lcdclk / 1000, mclk / 1000, div);
 | |
| 
 | |
| 	return div;
 | |
| }
 | |
| 
 | |
| static void mx1_camera_activate(struct mx1_camera_dev *pcdev)
 | |
| {
 | |
| 	unsigned int csicr1 = CSICR1_EN;
 | |
| 
 | |
| 	dev_dbg(pcdev->dev, "Activate device\n");
 | |
| 
 | |
| 	clk_enable(pcdev->clk);
 | |
| 
 | |
| 	/* enable CSI before doing anything else */
 | |
| 	__raw_writel(csicr1, pcdev->base + CSICR1);
 | |
| 
 | |
| 	csicr1 |= CSICR1_MCLKEN | CSICR1_FCC | CSICR1_GCLK_MODE;
 | |
| 	csicr1 |= CSICR1_MCLKDIV(mclk_get_divisor(pcdev));
 | |
| 	csicr1 |= CSICR1_RXFF_LEVEL(2); /* 16 words */
 | |
| 
 | |
| 	__raw_writel(csicr1, pcdev->base + CSICR1);
 | |
| }
 | |
| 
 | |
| static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev)
 | |
| {
 | |
| 	dev_dbg(pcdev->dev, "Deactivate device\n");
 | |
| 
 | |
| 	/* Disable all CSI interface */
 | |
| 	__raw_writel(0x00, pcdev->base + CSICR1);
 | |
| 
 | |
| 	clk_disable(pcdev->clk);
 | |
| }
 | |
| 
 | |
| /* The following two functions absolutely depend on the fact, that
 | |
|  * there can be only one camera on i.MX1/i.MXL camera sensor interface */
 | |
| static int mx1_camera_add_device(struct soc_camera_device *icd)
 | |
| {
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 | |
| 	struct mx1_camera_dev *pcdev = ici->priv;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (pcdev->icd) {
 | |
| 		ret = -EBUSY;
 | |
| 		goto ebusy;
 | |
| 	}
 | |
| 
 | |
| 	dev_info(&icd->dev, "MX1 Camera driver attached to camera %d\n",
 | |
| 		 icd->devnum);
 | |
| 
 | |
| 	mx1_camera_activate(pcdev);
 | |
| 	ret = icd->ops->init(icd);
 | |
| 
 | |
| 	if (!ret)
 | |
| 		pcdev->icd = icd;
 | |
| 
 | |
| ebusy:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void mx1_camera_remove_device(struct soc_camera_device *icd)
 | |
| {
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 | |
| 	struct mx1_camera_dev *pcdev = ici->priv;
 | |
| 	unsigned int csicr1;
 | |
| 
 | |
| 	BUG_ON(icd != pcdev->icd);
 | |
| 
 | |
| 	/* disable interrupts */
 | |
| 	csicr1 = __raw_readl(pcdev->base + CSICR1) & ~CSI_IRQ_MASK;
 | |
| 	__raw_writel(csicr1, pcdev->base + CSICR1);
 | |
| 
 | |
| 	/* Stop DMA engine */
 | |
| 	imx_dma_disable(pcdev->dma_chan);
 | |
| 
 | |
| 	dev_info(&icd->dev, "MX1 Camera driver detached from camera %d\n",
 | |
| 		 icd->devnum);
 | |
| 
 | |
| 	icd->ops->release(icd);
 | |
| 
 | |
| 	mx1_camera_deactivate(pcdev);
 | |
| 
 | |
| 	pcdev->icd = NULL;
 | |
| }
 | |
| 
 | |
| static int mx1_camera_set_crop(struct soc_camera_device *icd,
 | |
| 			       struct v4l2_rect *rect)
 | |
| {
 | |
| 	return icd->ops->set_crop(icd, rect);
 | |
| }
 | |
| 
 | |
| static int mx1_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
 | |
| {
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 | |
| 	struct mx1_camera_dev *pcdev = ici->priv;
 | |
| 	unsigned long camera_flags, common_flags;
 | |
| 	unsigned int csicr1;
 | |
| 	int ret;
 | |
| 
 | |
| 	camera_flags = icd->ops->query_bus_param(icd);
 | |
| 
 | |
| 	/* MX1 supports only 8bit buswidth */
 | |
| 	common_flags = soc_camera_bus_param_compatible(camera_flags,
 | |
| 							       CSI_BUS_FLAGS);
 | |
| 	if (!common_flags)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	icd->buswidth = 8;
 | |
| 
 | |
| 	/* Make choises, based on platform choice */
 | |
| 	if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
 | |
| 		(common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
 | |
| 			if (!pcdev->pdata ||
 | |
| 			     pcdev->pdata->flags & MX1_CAMERA_VSYNC_HIGH)
 | |
| 				common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
 | |
| 			else
 | |
| 				common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
 | |
| 	}
 | |
| 
 | |
| 	if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
 | |
| 		(common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
 | |
| 			if (!pcdev->pdata ||
 | |
| 			     pcdev->pdata->flags & MX1_CAMERA_PCLK_RISING)
 | |
| 				common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
 | |
| 			else
 | |
| 				common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
 | |
| 	}
 | |
| 
 | |
| 	if ((common_flags & SOCAM_DATA_ACTIVE_HIGH) &&
 | |
| 		(common_flags & SOCAM_DATA_ACTIVE_LOW)) {
 | |
| 			if (!pcdev->pdata ||
 | |
| 			     pcdev->pdata->flags & MX1_CAMERA_DATA_HIGH)
 | |
| 				common_flags &= ~SOCAM_DATA_ACTIVE_LOW;
 | |
| 			else
 | |
| 				common_flags &= ~SOCAM_DATA_ACTIVE_HIGH;
 | |
| 	}
 | |
| 
 | |
| 	ret = icd->ops->set_bus_param(icd, common_flags);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	csicr1 = __raw_readl(pcdev->base + CSICR1);
 | |
| 
 | |
| 	if (common_flags & SOCAM_PCLK_SAMPLE_RISING)
 | |
| 		csicr1 |= CSICR1_REDGE;
 | |
| 	if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
 | |
| 		csicr1 |= CSICR1_SOF_POL;
 | |
| 	if (common_flags & SOCAM_DATA_ACTIVE_LOW)
 | |
| 		csicr1 |= CSICR1_DATA_POL;
 | |
| 
 | |
| 	__raw_writel(csicr1, pcdev->base + CSICR1);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int mx1_camera_set_fmt(struct soc_camera_device *icd,
 | |
| 			      struct v4l2_format *f)
 | |
| {
 | |
| 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 | |
| 	const struct soc_camera_format_xlate *xlate;
 | |
| 	struct v4l2_pix_format *pix = &f->fmt.pix;
 | |
| 	int ret;
 | |
| 
 | |
| 	xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
 | |
| 	if (!xlate) {
 | |
| 		dev_warn(&ici->dev, "Format %x not found\n", pix->pixelformat);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	ret = icd->ops->set_fmt(icd, f);
 | |
| 	if (!ret) {
 | |
| 		icd->buswidth = xlate->buswidth;
 | |
| 		icd->current_fmt = xlate->host_fmt;
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int mx1_camera_try_fmt(struct soc_camera_device *icd,
 | |
| 			      struct v4l2_format *f)
 | |
| {
 | |
| 	/* TODO: limit to mx1 hardware capabilities */
 | |
| 
 | |
| 	/* limit to sensor capabilities */
 | |
| 	return icd->ops->try_fmt(icd, f);
 | |
| }
 | |
| 
 | |
| static int mx1_camera_reqbufs(struct soc_camera_file *icf,
 | |
| 			      struct v4l2_requestbuffers *p)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	/* This is for locking debugging only. I removed spinlocks and now I
 | |
| 	 * check whether .prepare is ever called on a linked buffer, or whether
 | |
| 	 * a dma IRQ can occur for an in-work or unlinked buffer. Until now
 | |
| 	 * it hadn't triggered */
 | |
| 	for (i = 0; i < p->count; i++) {
 | |
| 		struct mx1_buffer *buf = container_of(icf->vb_vidq.bufs[i],
 | |
| 						      struct mx1_buffer, vb);
 | |
| 		buf->inwork = 0;
 | |
| 		INIT_LIST_HEAD(&buf->vb.queue);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static unsigned int mx1_camera_poll(struct file *file, poll_table *pt)
 | |
| {
 | |
| 	struct soc_camera_file *icf = file->private_data;
 | |
| 	struct mx1_buffer *buf;
 | |
| 
 | |
| 	buf = list_entry(icf->vb_vidq.stream.next, struct mx1_buffer,
 | |
| 			 vb.stream);
 | |
| 
 | |
| 	poll_wait(file, &buf->vb.done, pt);
 | |
| 
 | |
| 	if (buf->vb.state == VIDEOBUF_DONE ||
 | |
| 	    buf->vb.state == VIDEOBUF_ERROR)
 | |
| 		return POLLIN | POLLRDNORM;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int mx1_camera_querycap(struct soc_camera_host *ici,
 | |
| 			       struct v4l2_capability *cap)
 | |
| {
 | |
| 	/* cap->name is set by the friendly caller:-> */
 | |
| 	strlcpy(cap->card, "i.MX1/i.MXL Camera", sizeof(cap->card));
 | |
| 	cap->version = VERSION_CODE;
 | |
| 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct soc_camera_host_ops mx1_soc_camera_host_ops = {
 | |
| 	.owner		= THIS_MODULE,
 | |
| 	.add		= mx1_camera_add_device,
 | |
| 	.remove		= mx1_camera_remove_device,
 | |
| 	.set_bus_param	= mx1_camera_set_bus_param,
 | |
| 	.set_crop	= mx1_camera_set_crop,
 | |
| 	.set_fmt	= mx1_camera_set_fmt,
 | |
| 	.try_fmt	= mx1_camera_try_fmt,
 | |
| 	.init_videobuf	= mx1_camera_init_videobuf,
 | |
| 	.reqbufs	= mx1_camera_reqbufs,
 | |
| 	.poll		= mx1_camera_poll,
 | |
| 	.querycap	= mx1_camera_querycap,
 | |
| };
 | |
| 
 | |
| /* Should be allocated dynamically too, but we have only one. */
 | |
| static struct soc_camera_host mx1_soc_camera_host = {
 | |
| 	.drv_name	= DRIVER_NAME,
 | |
| 	.ops		= &mx1_soc_camera_host_ops,
 | |
| };
 | |
| 
 | |
| static struct fiq_handler fh = {
 | |
| 	.name		= "csi_sof"
 | |
| };
 | |
| 
 | |
| static int __init mx1_camera_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct mx1_camera_dev *pcdev;
 | |
| 	struct resource *res;
 | |
| 	struct pt_regs regs;
 | |
| 	struct clk *clk;
 | |
| 	void __iomem *base;
 | |
| 	unsigned int irq;
 | |
| 	int err = 0;
 | |
| 
 | |
| 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 | |
| 	irq = platform_get_irq(pdev, 0);
 | |
| 	if (!res || !irq) {
 | |
| 		err = -ENODEV;
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	clk = clk_get(&pdev->dev, "csi_clk");
 | |
| 	if (IS_ERR(clk)) {
 | |
| 		err = PTR_ERR(clk);
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL);
 | |
| 	if (!pcdev) {
 | |
| 		dev_err(&pdev->dev, "Could not allocate pcdev\n");
 | |
| 		err = -ENOMEM;
 | |
| 		goto exit_put_clk;
 | |
| 	}
 | |
| 
 | |
| 	dev_set_drvdata(&pdev->dev, pcdev);
 | |
| 	pcdev->res = res;
 | |
| 	pcdev->clk = clk;
 | |
| 
 | |
| 	pcdev->pdata = pdev->dev.platform_data;
 | |
| 
 | |
| 	if (pcdev->pdata)
 | |
| 		pcdev->mclk = pcdev->pdata->mclk_10khz * 10000;
 | |
| 
 | |
| 	if (!pcdev->mclk) {
 | |
| 		dev_warn(&pdev->dev,
 | |
| 			 "mclk_10khz == 0! Please, fix your platform data. "
 | |
| 			 "Using default 20MHz\n");
 | |
| 		pcdev->mclk = 20000000;
 | |
| 	}
 | |
| 
 | |
| 	INIT_LIST_HEAD(&pcdev->capture);
 | |
| 	spin_lock_init(&pcdev->lock);
 | |
| 
 | |
| 	/*
 | |
| 	 * Request the regions.
 | |
| 	 */
 | |
| 	if (!request_mem_region(res->start, resource_size(res), DRIVER_NAME)) {
 | |
| 		err = -EBUSY;
 | |
| 		goto exit_kfree;
 | |
| 	}
 | |
| 
 | |
| 	base = ioremap(res->start, resource_size(res));
 | |
| 	if (!base) {
 | |
| 		err = -ENOMEM;
 | |
| 		goto exit_release;
 | |
| 	}
 | |
| 	pcdev->irq = irq;
 | |
| 	pcdev->base = base;
 | |
| 	pcdev->dev = &pdev->dev;
 | |
| 
 | |
| 	/* request dma */
 | |
| 	pcdev->dma_chan = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_HIGH);
 | |
| 	if (pcdev->dma_chan < 0) {
 | |
| 		dev_err(pcdev->dev, "Can't request DMA for MX1 CSI\n");
 | |
| 		err = -EBUSY;
 | |
| 		goto exit_iounmap;
 | |
| 	}
 | |
| 	dev_dbg(pcdev->dev, "got DMA channel %d\n", pcdev->dma_chan);
 | |
| 
 | |
| 	imx_dma_setup_handlers(pcdev->dma_chan, mx1_camera_dma_irq, NULL,
 | |
| 			       pcdev);
 | |
| 
 | |
| 	imx_dma_config_channel(pcdev->dma_chan, IMX_DMA_TYPE_FIFO,
 | |
| 			       IMX_DMA_MEMSIZE_32, DMA_REQ_CSI_R, 0);
 | |
| 	/* burst length : 16 words = 64 bytes */
 | |
| 	imx_dma_config_burstlen(pcdev->dma_chan, 0);
 | |
| 
 | |
| 	/* request irq */
 | |
| 	err = claim_fiq(&fh);
 | |
| 	if (err) {
 | |
| 		dev_err(pcdev->dev, "Camera interrupt register failed \n");
 | |
| 		goto exit_free_dma;
 | |
| 	}
 | |
| 
 | |
| 	set_fiq_handler(&mx1_camera_sof_fiq_start, &mx1_camera_sof_fiq_end -
 | |
| 						   &mx1_camera_sof_fiq_start);
 | |
| 
 | |
| 	regs.ARM_r8 = DMA_BASE + DMA_DIMR;
 | |
| 	regs.ARM_r9 = DMA_BASE + DMA_CCR(pcdev->dma_chan);
 | |
| 	regs.ARM_r10 = (long)pcdev->base + CSICR1;
 | |
| 	regs.ARM_fp = (long)pcdev->base + CSISR;
 | |
| 	regs.ARM_sp = 1 << pcdev->dma_chan;
 | |
| 	set_fiq_regs(®s);
 | |
| 
 | |
| 	mxc_set_irq_fiq(irq, 1);
 | |
| 	enable_fiq(irq);
 | |
| 
 | |
| 	mx1_soc_camera_host.priv	= pcdev;
 | |
| 	mx1_soc_camera_host.dev.parent	= &pdev->dev;
 | |
| 	mx1_soc_camera_host.nr		= pdev->id;
 | |
| 	err = soc_camera_host_register(&mx1_soc_camera_host);
 | |
| 	if (err)
 | |
| 		goto exit_free_irq;
 | |
| 
 | |
| 	dev_info(&pdev->dev, "MX1 Camera driver loaded\n");
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| exit_free_irq:
 | |
| 	disable_fiq(irq);
 | |
| 	mxc_set_irq_fiq(irq, 0);
 | |
| 	release_fiq(&fh);
 | |
| exit_free_dma:
 | |
| 	imx_dma_free(pcdev->dma_chan);
 | |
| exit_iounmap:
 | |
| 	iounmap(base);
 | |
| exit_release:
 | |
| 	release_mem_region(res->start, resource_size(res));
 | |
| exit_kfree:
 | |
| 	kfree(pcdev);
 | |
| exit_put_clk:
 | |
| 	clk_put(clk);
 | |
| exit:
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int __exit mx1_camera_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct mx1_camera_dev *pcdev = platform_get_drvdata(pdev);
 | |
| 	struct resource *res;
 | |
| 
 | |
| 	imx_dma_free(pcdev->dma_chan);
 | |
| 	disable_fiq(pcdev->irq);
 | |
| 	mxc_set_irq_fiq(pcdev->irq, 0);
 | |
| 	release_fiq(&fh);
 | |
| 
 | |
| 	clk_put(pcdev->clk);
 | |
| 
 | |
| 	soc_camera_host_unregister(&mx1_soc_camera_host);
 | |
| 
 | |
| 	iounmap(pcdev->base);
 | |
| 
 | |
| 	res = pcdev->res;
 | |
| 	release_mem_region(res->start, resource_size(res));
 | |
| 
 | |
| 	kfree(pcdev);
 | |
| 
 | |
| 	dev_info(&pdev->dev, "MX1 Camera driver unloaded\n");
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct platform_driver mx1_camera_driver = {
 | |
| 	.driver 	= {
 | |
| 		.name	= DRIVER_NAME,
 | |
| 	},
 | |
| 	.remove		= __exit_p(mx1_camera_remove),
 | |
| };
 | |
| 
 | |
| static int __init mx1_camera_init(void)
 | |
| {
 | |
| 	return platform_driver_probe(&mx1_camera_driver, mx1_camera_probe);
 | |
| }
 | |
| 
 | |
| static void __exit mx1_camera_exit(void)
 | |
| {
 | |
| 	return platform_driver_unregister(&mx1_camera_driver);
 | |
| }
 | |
| 
 | |
| module_init(mx1_camera_init);
 | |
| module_exit(mx1_camera_exit);
 | |
| 
 | |
| MODULE_DESCRIPTION("i.MX1/i.MXL SoC Camera Host driver");
 | |
| MODULE_AUTHOR("Paulius Zaleckas <paulius.zaleckas@teltonika.lt>");
 | |
| MODULE_LICENSE("GPL v2");
 | |
| MODULE_ALIAS("platform:" DRIVER_NAME);
 |