mirror of
				https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
				synced 2025-10-31 05:14:38 +00:00 
			
		
		
		
	 f26788da3b
			
		
	
	
		f26788da3b
		
	
	
	
	
		
			
			Export usb_serial_generic_close so that drivers can easily kill the read and write urb and make sure that the write fifo is reset. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
		
			
				
	
	
		
			671 lines
		
	
	
		
			17 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			671 lines
		
	
	
		
			17 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
 | |
|  * Copyright 2007, Werner Cornelius <werner@cornelius-consult.de>
 | |
|  * Copyright 2009, Boris Hajduk <boris@hajduk.org>
 | |
|  *
 | |
|  * ch341.c implements a serial port driver for the Winchiphead CH341.
 | |
|  *
 | |
|  * The CH341 device can be used to implement an RS232 asynchronous
 | |
|  * serial port, an IEEE-1284 parallel printer port or a memory-like
 | |
|  * interface. In all cases the CH341 supports an I2C interface as well.
 | |
|  * This driver only supports the asynchronous serial interface.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or
 | |
|  * modify it under the terms of the GNU General Public License version
 | |
|  * 2 as published by the Free Software Foundation.
 | |
|  */
 | |
| 
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/tty.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/usb.h>
 | |
| #include <linux/usb/serial.h>
 | |
| #include <linux/serial.h>
 | |
| #include <asm/unaligned.h>
 | |
| 
 | |
| #define DEFAULT_BAUD_RATE 9600
 | |
| #define DEFAULT_TIMEOUT   1000
 | |
| 
 | |
| /* flags for IO-Bits */
 | |
| #define CH341_BIT_RTS (1 << 6)
 | |
| #define CH341_BIT_DTR (1 << 5)
 | |
| 
 | |
| /******************************/
 | |
| /* interrupt pipe definitions */
 | |
| /******************************/
 | |
| /* always 4 interrupt bytes */
 | |
| /* first irq byte normally 0x08 */
 | |
| /* second irq byte base 0x7d + below */
 | |
| /* third irq byte base 0x94 + below */
 | |
| /* fourth irq byte normally 0xee */
 | |
| 
 | |
| /* second interrupt byte */
 | |
| #define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */
 | |
| 
 | |
| /* status returned in third interrupt answer byte, inverted in data
 | |
|    from irq */
 | |
| #define CH341_BIT_CTS 0x01
 | |
| #define CH341_BIT_DSR 0x02
 | |
| #define CH341_BIT_RI  0x04
 | |
| #define CH341_BIT_DCD 0x08
 | |
| #define CH341_BITS_MODEM_STAT 0x0f /* all bits */
 | |
| 
 | |
| /*******************************/
 | |
| /* baudrate calculation factor */
 | |
| /*******************************/
 | |
| #define CH341_BAUDBASE_FACTOR 1532620800
 | |
| #define CH341_BAUDBASE_DIVMAX 3
 | |
| 
 | |
| /* Break support - the information used to implement this was gleaned from
 | |
|  * the Net/FreeBSD uchcom.c driver by Takanori Watanabe.  Domo arigato.
 | |
|  */
 | |
| 
 | |
| #define CH341_REQ_WRITE_REG    0x9A
 | |
| #define CH341_REQ_READ_REG     0x95
 | |
| #define CH341_REG_BREAK1       0x05
 | |
| #define CH341_REG_BREAK2       0x18
 | |
| #define CH341_NBREAK_BITS_REG1 0x01
 | |
| #define CH341_NBREAK_BITS_REG2 0x40
 | |
| 
 | |
| 
 | |
| static int debug;
 | |
| 
 | |
| static const struct usb_device_id id_table[] = {
 | |
| 	{ USB_DEVICE(0x4348, 0x5523) },
 | |
| 	{ USB_DEVICE(0x1a86, 0x7523) },
 | |
| 	{ },
 | |
| };
 | |
| MODULE_DEVICE_TABLE(usb, id_table);
 | |
| 
 | |
| struct ch341_private {
 | |
| 	spinlock_t lock; /* access lock */
 | |
| 	wait_queue_head_t delta_msr_wait; /* wait queue for modem status */
 | |
| 	unsigned baud_rate; /* set baud rate */
 | |
| 	u8 line_control; /* set line control value RTS/DTR */
 | |
| 	u8 line_status; /* active status of modem control inputs */
 | |
| 	u8 multi_status_change; /* status changed multiple since last call */
 | |
| };
 | |
| 
 | |
| static int ch341_control_out(struct usb_device *dev, u8 request,
 | |
| 			     u16 value, u16 index)
 | |
| {
 | |
| 	int r;
 | |
| 	dbg("ch341_control_out(%02x,%02x,%04x,%04x)", USB_DIR_OUT|0x40,
 | |
| 		(int)request, (int)value, (int)index);
 | |
| 
 | |
| 	r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
 | |
| 			    USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
 | |
| 			    value, index, NULL, 0, DEFAULT_TIMEOUT);
 | |
| 
 | |
| 	return r;
 | |
| }
 | |
| 
 | |
| static int ch341_control_in(struct usb_device *dev,
 | |
| 			    u8 request, u16 value, u16 index,
 | |
| 			    char *buf, unsigned bufsize)
 | |
| {
 | |
| 	int r;
 | |
| 	dbg("ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)", USB_DIR_IN|0x40,
 | |
| 		(int)request, (int)value, (int)index, buf, (int)bufsize);
 | |
| 
 | |
| 	r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
 | |
| 			    USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
 | |
| 			    value, index, buf, bufsize, DEFAULT_TIMEOUT);
 | |
| 	return r;
 | |
| }
 | |
| 
 | |
| static int ch341_set_baudrate(struct usb_device *dev,
 | |
| 			      struct ch341_private *priv)
 | |
| {
 | |
| 	short a, b;
 | |
| 	int r;
 | |
| 	unsigned long factor;
 | |
| 	short divisor;
 | |
| 
 | |
| 	dbg("ch341_set_baudrate(%d)", priv->baud_rate);
 | |
| 
 | |
| 	if (!priv->baud_rate)
 | |
| 		return -EINVAL;
 | |
| 	factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate);
 | |
| 	divisor = CH341_BAUDBASE_DIVMAX;
 | |
| 
 | |
| 	while ((factor > 0xfff0) && divisor) {
 | |
| 		factor >>= 3;
 | |
| 		divisor--;
 | |
| 	}
 | |
| 
 | |
| 	if (factor > 0xfff0)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	factor = 0x10000 - factor;
 | |
| 	a = (factor & 0xff00) | divisor;
 | |
| 	b = factor & 0xff;
 | |
| 
 | |
| 	r = ch341_control_out(dev, 0x9a, 0x1312, a);
 | |
| 	if (!r)
 | |
| 		r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
 | |
| 
 | |
| 	return r;
 | |
| }
 | |
| 
 | |
| static int ch341_set_handshake(struct usb_device *dev, u8 control)
 | |
| {
 | |
| 	dbg("ch341_set_handshake(0x%02x)", control);
 | |
| 	return ch341_control_out(dev, 0xa4, ~control, 0);
 | |
| }
 | |
| 
 | |
| static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
 | |
| {
 | |
| 	char *buffer;
 | |
| 	int r;
 | |
| 	const unsigned size = 8;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	dbg("ch341_get_status()");
 | |
| 
 | |
| 	buffer = kmalloc(size, GFP_KERNEL);
 | |
| 	if (!buffer)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size);
 | |
| 	if (r < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	/* setup the private status if available */
 | |
| 	if (r == 2) {
 | |
| 		r = 0;
 | |
| 		spin_lock_irqsave(&priv->lock, flags);
 | |
| 		priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
 | |
| 		priv->multi_status_change = 0;
 | |
| 		spin_unlock_irqrestore(&priv->lock, flags);
 | |
| 	} else
 | |
| 		r = -EPROTO;
 | |
| 
 | |
| out:	kfree(buffer);
 | |
| 	return r;
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
 | |
| {
 | |
| 	char *buffer;
 | |
| 	int r;
 | |
| 	const unsigned size = 8;
 | |
| 
 | |
| 	dbg("ch341_configure()");
 | |
| 
 | |
| 	buffer = kmalloc(size, GFP_KERNEL);
 | |
| 	if (!buffer)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	/* expect two bytes 0x27 0x00 */
 | |
| 	r = ch341_control_in(dev, 0x5f, 0, 0, buffer, size);
 | |
| 	if (r < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	r = ch341_control_out(dev, 0xa1, 0, 0);
 | |
| 	if (r < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	r = ch341_set_baudrate(dev, priv);
 | |
| 	if (r < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	/* expect two bytes 0x56 0x00 */
 | |
| 	r = ch341_control_in(dev, 0x95, 0x2518, 0, buffer, size);
 | |
| 	if (r < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	r = ch341_control_out(dev, 0x9a, 0x2518, 0x0050);
 | |
| 	if (r < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	/* expect 0xff 0xee */
 | |
| 	r = ch341_get_status(dev, priv);
 | |
| 	if (r < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	r = ch341_control_out(dev, 0xa1, 0x501f, 0xd90a);
 | |
| 	if (r < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	r = ch341_set_baudrate(dev, priv);
 | |
| 	if (r < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	r = ch341_set_handshake(dev, priv->line_control);
 | |
| 	if (r < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	/* expect 0x9f 0xee */
 | |
| 	r = ch341_get_status(dev, priv);
 | |
| 
 | |
| out:	kfree(buffer);
 | |
| 	return r;
 | |
| }
 | |
| 
 | |
| /* allocate private data */
 | |
| static int ch341_attach(struct usb_serial *serial)
 | |
| {
 | |
| 	struct ch341_private *priv;
 | |
| 	int r;
 | |
| 
 | |
| 	dbg("ch341_attach()");
 | |
| 
 | |
| 	/* private data */
 | |
| 	priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
 | |
| 	if (!priv)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	spin_lock_init(&priv->lock);
 | |
| 	init_waitqueue_head(&priv->delta_msr_wait);
 | |
| 	priv->baud_rate = DEFAULT_BAUD_RATE;
 | |
| 	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 | |
| 
 | |
| 	r = ch341_configure(serial->dev, priv);
 | |
| 	if (r < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	usb_set_serial_port_data(serial->port[0], priv);
 | |
| 	return 0;
 | |
| 
 | |
| error:	kfree(priv);
 | |
| 	return r;
 | |
| }
 | |
| 
 | |
| static int ch341_carrier_raised(struct usb_serial_port *port)
 | |
| {
 | |
| 	struct ch341_private *priv = usb_get_serial_port_data(port);
 | |
| 	if (priv->line_status & CH341_BIT_DCD)
 | |
| 		return 1;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void ch341_dtr_rts(struct usb_serial_port *port, int on)
 | |
| {
 | |
| 	struct ch341_private *priv = usb_get_serial_port_data(port);
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	dbg("%s - port %d", __func__, port->number);
 | |
| 	/* drop DTR and RTS */
 | |
| 	spin_lock_irqsave(&priv->lock, flags);
 | |
| 	if (on)
 | |
| 		priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR;
 | |
| 	else
 | |
| 		priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
 | |
| 	spin_unlock_irqrestore(&priv->lock, flags);
 | |
| 	ch341_set_handshake(port->serial->dev, priv->line_control);
 | |
| 	wake_up_interruptible(&priv->delta_msr_wait);
 | |
| }
 | |
| 
 | |
| static void ch341_close(struct usb_serial_port *port)
 | |
| {
 | |
| 	dbg("%s - port %d", __func__, port->number);
 | |
| 
 | |
| 	usb_serial_generic_close(port);
 | |
| 	usb_kill_urb(port->interrupt_in_urb);
 | |
| }
 | |
| 
 | |
| 
 | |
| /* open this device, set default parameters */
 | |
| static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 | |
| {
 | |
| 	struct usb_serial *serial = port->serial;
 | |
| 	struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
 | |
| 	int r;
 | |
| 
 | |
| 	dbg("ch341_open()");
 | |
| 
 | |
| 	priv->baud_rate = DEFAULT_BAUD_RATE;
 | |
| 
 | |
| 	r = ch341_configure(serial->dev, priv);
 | |
| 	if (r)
 | |
| 		goto out;
 | |
| 
 | |
| 	r = ch341_set_handshake(serial->dev, priv->line_control);
 | |
| 	if (r)
 | |
| 		goto out;
 | |
| 
 | |
| 	r = ch341_set_baudrate(serial->dev, priv);
 | |
| 	if (r)
 | |
| 		goto out;
 | |
| 
 | |
| 	dbg("%s - submitting interrupt urb", __func__);
 | |
| 	port->interrupt_in_urb->dev = serial->dev;
 | |
| 	r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 | |
| 	if (r) {
 | |
| 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
 | |
| 			" error %d\n", __func__, r);
 | |
| 		ch341_close(port);
 | |
| 		return -EPROTO;
 | |
| 	}
 | |
| 
 | |
| 	r = usb_serial_generic_open(tty, port);
 | |
| 
 | |
| out:	return r;
 | |
| }
 | |
| 
 | |
| /* Old_termios contains the original termios settings and
 | |
|  * tty->termios contains the new setting to be used.
 | |
|  */
 | |
| static void ch341_set_termios(struct tty_struct *tty,
 | |
| 		struct usb_serial_port *port, struct ktermios *old_termios)
 | |
| {
 | |
| 	struct ch341_private *priv = usb_get_serial_port_data(port);
 | |
| 	unsigned baud_rate;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	dbg("ch341_set_termios()");
 | |
| 
 | |
| 	baud_rate = tty_get_baud_rate(tty);
 | |
| 
 | |
| 	priv->baud_rate = baud_rate;
 | |
| 
 | |
| 	if (baud_rate) {
 | |
| 		spin_lock_irqsave(&priv->lock, flags);
 | |
| 		priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
 | |
| 		spin_unlock_irqrestore(&priv->lock, flags);
 | |
| 		ch341_set_baudrate(port->serial->dev, priv);
 | |
| 	} else {
 | |
| 		spin_lock_irqsave(&priv->lock, flags);
 | |
| 		priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
 | |
| 		spin_unlock_irqrestore(&priv->lock, flags);
 | |
| 	}
 | |
| 
 | |
| 	ch341_set_handshake(port->serial->dev, priv->line_control);
 | |
| 
 | |
| 	/* Unimplemented:
 | |
| 	 * (cflag & CSIZE) : data bits [5, 8]
 | |
| 	 * (cflag & PARENB) : parity {NONE, EVEN, ODD}
 | |
| 	 * (cflag & CSTOPB) : stop bits [1, 2]
 | |
| 	 */
 | |
| }
 | |
| 
 | |
| static void ch341_break_ctl(struct tty_struct *tty, int break_state)
 | |
| {
 | |
| 	const uint16_t ch341_break_reg =
 | |
| 		CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8);
 | |
| 	struct usb_serial_port *port = tty->driver_data;
 | |
| 	int r;
 | |
| 	uint16_t reg_contents;
 | |
| 	uint8_t *break_reg;
 | |
| 
 | |
| 	dbg("%s()", __func__);
 | |
| 
 | |
| 	break_reg = kmalloc(2, GFP_KERNEL);
 | |
| 	if (!break_reg) {
 | |
| 		dev_err(&port->dev, "%s - kmalloc failed\n", __func__);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG,
 | |
| 			ch341_break_reg, 0, break_reg, 2);
 | |
| 	if (r < 0) {
 | |
| 		dev_err(&port->dev, "%s - USB control read error (%d)\n",
 | |
| 				__func__, r);
 | |
| 		goto out;
 | |
| 	}
 | |
| 	dbg("%s - initial ch341 break register contents - reg1: %x, reg2: %x",
 | |
| 			__func__, break_reg[0], break_reg[1]);
 | |
| 	if (break_state != 0) {
 | |
| 		dbg("%s - Enter break state requested", __func__);
 | |
| 		break_reg[0] &= ~CH341_NBREAK_BITS_REG1;
 | |
| 		break_reg[1] &= ~CH341_NBREAK_BITS_REG2;
 | |
| 	} else {
 | |
| 		dbg("%s - Leave break state requested", __func__);
 | |
| 		break_reg[0] |= CH341_NBREAK_BITS_REG1;
 | |
| 		break_reg[1] |= CH341_NBREAK_BITS_REG2;
 | |
| 	}
 | |
| 	dbg("%s - New ch341 break register contents - reg1: %x, reg2: %x",
 | |
| 			__func__, break_reg[0], break_reg[1]);
 | |
| 	reg_contents = get_unaligned_le16(break_reg);
 | |
| 	r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG,
 | |
| 			ch341_break_reg, reg_contents);
 | |
| 	if (r < 0)
 | |
| 		dev_err(&port->dev, "%s - USB control write error (%d)\n",
 | |
| 				__func__, r);
 | |
| out:
 | |
| 	kfree(break_reg);
 | |
| }
 | |
| 
 | |
| static int ch341_tiocmset(struct tty_struct *tty, struct file *file,
 | |
| 			  unsigned int set, unsigned int clear)
 | |
| {
 | |
| 	struct usb_serial_port *port = tty->driver_data;
 | |
| 	struct ch341_private *priv = usb_get_serial_port_data(port);
 | |
| 	unsigned long flags;
 | |
| 	u8 control;
 | |
| 
 | |
| 	spin_lock_irqsave(&priv->lock, flags);
 | |
| 	if (set & TIOCM_RTS)
 | |
| 		priv->line_control |= CH341_BIT_RTS;
 | |
| 	if (set & TIOCM_DTR)
 | |
| 		priv->line_control |= CH341_BIT_DTR;
 | |
| 	if (clear & TIOCM_RTS)
 | |
| 		priv->line_control &= ~CH341_BIT_RTS;
 | |
| 	if (clear & TIOCM_DTR)
 | |
| 		priv->line_control &= ~CH341_BIT_DTR;
 | |
| 	control = priv->line_control;
 | |
| 	spin_unlock_irqrestore(&priv->lock, flags);
 | |
| 
 | |
| 	return ch341_set_handshake(port->serial->dev, control);
 | |
| }
 | |
| 
 | |
| static void ch341_read_int_callback(struct urb *urb)
 | |
| {
 | |
| 	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
 | |
| 	unsigned char *data = urb->transfer_buffer;
 | |
| 	unsigned int actual_length = urb->actual_length;
 | |
| 	int status;
 | |
| 
 | |
| 	dbg("%s (%d)", __func__, port->number);
 | |
| 
 | |
| 	switch (urb->status) {
 | |
| 	case 0:
 | |
| 		/* success */
 | |
| 		break;
 | |
| 	case -ECONNRESET:
 | |
| 	case -ENOENT:
 | |
| 	case -ESHUTDOWN:
 | |
| 		/* this urb is terminated, clean up */
 | |
| 		dbg("%s - urb shutting down with status: %d", __func__,
 | |
| 		    urb->status);
 | |
| 		return;
 | |
| 	default:
 | |
| 		dbg("%s - nonzero urb status received: %d", __func__,
 | |
| 		    urb->status);
 | |
| 		goto exit;
 | |
| 	}
 | |
| 
 | |
| 	usb_serial_debug_data(debug, &port->dev, __func__,
 | |
| 			      urb->actual_length, urb->transfer_buffer);
 | |
| 
 | |
| 	if (actual_length >= 4) {
 | |
| 		struct ch341_private *priv = usb_get_serial_port_data(port);
 | |
| 		unsigned long flags;
 | |
| 
 | |
| 		spin_lock_irqsave(&priv->lock, flags);
 | |
| 		priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT;
 | |
| 		if ((data[1] & CH341_MULT_STAT))
 | |
| 			priv->multi_status_change = 1;
 | |
| 		spin_unlock_irqrestore(&priv->lock, flags);
 | |
| 		wake_up_interruptible(&priv->delta_msr_wait);
 | |
| 	}
 | |
| 
 | |
| exit:
 | |
| 	status = usb_submit_urb(urb, GFP_ATOMIC);
 | |
| 	if (status)
 | |
| 		dev_err(&urb->dev->dev,
 | |
| 			"%s - usb_submit_urb failed with result %d\n",
 | |
| 			__func__, status);
 | |
| }
 | |
| 
 | |
| static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 | |
| {
 | |
| 	struct ch341_private *priv = usb_get_serial_port_data(port);
 | |
| 	unsigned long flags;
 | |
| 	u8 prevstatus;
 | |
| 	u8 status;
 | |
| 	u8 changed;
 | |
| 	u8 multi_change = 0;
 | |
| 
 | |
| 	spin_lock_irqsave(&priv->lock, flags);
 | |
| 	prevstatus = priv->line_status;
 | |
| 	priv->multi_status_change = 0;
 | |
| 	spin_unlock_irqrestore(&priv->lock, flags);
 | |
| 
 | |
| 	while (!multi_change) {
 | |
| 		interruptible_sleep_on(&priv->delta_msr_wait);
 | |
| 		/* see if a signal did it */
 | |
| 		if (signal_pending(current))
 | |
| 			return -ERESTARTSYS;
 | |
| 
 | |
| 		spin_lock_irqsave(&priv->lock, flags);
 | |
| 		status = priv->line_status;
 | |
| 		multi_change = priv->multi_status_change;
 | |
| 		spin_unlock_irqrestore(&priv->lock, flags);
 | |
| 
 | |
| 		changed = prevstatus ^ status;
 | |
| 
 | |
| 		if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) ||
 | |
| 		    ((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) ||
 | |
| 		    ((arg & TIOCM_CD)  && (changed & CH341_BIT_DCD)) ||
 | |
| 		    ((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) {
 | |
| 			return 0;
 | |
| 		}
 | |
| 		prevstatus = status;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/
 | |
| static int ch341_ioctl(struct tty_struct *tty, struct file *file,
 | |
| 			unsigned int cmd, unsigned long arg)
 | |
| {
 | |
| 	struct usb_serial_port *port = tty->driver_data;
 | |
| 	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
 | |
| 
 | |
| 	switch (cmd) {
 | |
| 	case TIOCMIWAIT:
 | |
| 		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
 | |
| 		return wait_modem_info(port, arg);
 | |
| 
 | |
| 	default:
 | |
| 		dbg("%s not supported = 0x%04x", __func__, cmd);
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	return -ENOIOCTLCMD;
 | |
| }
 | |
| 
 | |
| static int ch341_tiocmget(struct tty_struct *tty, struct file *file)
 | |
| {
 | |
| 	struct usb_serial_port *port = tty->driver_data;
 | |
| 	struct ch341_private *priv = usb_get_serial_port_data(port);
 | |
| 	unsigned long flags;
 | |
| 	u8 mcr;
 | |
| 	u8 status;
 | |
| 	unsigned int result;
 | |
| 
 | |
| 	dbg("%s (%d)", __func__, port->number);
 | |
| 
 | |
| 	spin_lock_irqsave(&priv->lock, flags);
 | |
| 	mcr = priv->line_control;
 | |
| 	status = priv->line_status;
 | |
| 	spin_unlock_irqrestore(&priv->lock, flags);
 | |
| 
 | |
| 	result = ((mcr & CH341_BIT_DTR)		? TIOCM_DTR : 0)
 | |
| 		  | ((mcr & CH341_BIT_RTS)	? TIOCM_RTS : 0)
 | |
| 		  | ((status & CH341_BIT_CTS)	? TIOCM_CTS : 0)
 | |
| 		  | ((status & CH341_BIT_DSR)	? TIOCM_DSR : 0)
 | |
| 		  | ((status & CH341_BIT_RI)	? TIOCM_RI  : 0)
 | |
| 		  | ((status & CH341_BIT_DCD)	? TIOCM_CD  : 0);
 | |
| 
 | |
| 	dbg("%s - result = %x", __func__, result);
 | |
| 
 | |
| 	return result;
 | |
| }
 | |
| 
 | |
| 
 | |
| static int ch341_reset_resume(struct usb_interface *intf)
 | |
| {
 | |
| 	struct usb_device *dev = interface_to_usbdev(intf);
 | |
| 	struct usb_serial *serial = NULL;
 | |
| 	struct ch341_private *priv;
 | |
| 
 | |
| 	serial = usb_get_intfdata(intf);
 | |
| 	priv = usb_get_serial_port_data(serial->port[0]);
 | |
| 
 | |
| 	/*reconfigure ch341 serial port after bus-reset*/
 | |
| 	ch341_configure(dev, priv);
 | |
| 
 | |
| 	usb_serial_resume(intf);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct usb_driver ch341_driver = {
 | |
| 	.name		= "ch341",
 | |
| 	.probe		= usb_serial_probe,
 | |
| 	.disconnect	= usb_serial_disconnect,
 | |
| 	.suspend	= usb_serial_suspend,
 | |
| 	.resume		= usb_serial_resume,
 | |
| 	.reset_resume	= ch341_reset_resume,
 | |
| 	.id_table	= id_table,
 | |
| 	.no_dynamic_id	= 1,
 | |
| 	.supports_autosuspend =	1,
 | |
| };
 | |
| 
 | |
| static struct usb_serial_driver ch341_device = {
 | |
| 	.driver = {
 | |
| 		.owner	= THIS_MODULE,
 | |
| 		.name	= "ch341-uart",
 | |
| 	},
 | |
| 	.id_table          = id_table,
 | |
| 	.usb_driver        = &ch341_driver,
 | |
| 	.num_ports         = 1,
 | |
| 	.open              = ch341_open,
 | |
| 	.dtr_rts	   = ch341_dtr_rts,
 | |
| 	.carrier_raised	   = ch341_carrier_raised,
 | |
| 	.close             = ch341_close,
 | |
| 	.ioctl             = ch341_ioctl,
 | |
| 	.set_termios       = ch341_set_termios,
 | |
| 	.break_ctl         = ch341_break_ctl,
 | |
| 	.tiocmget          = ch341_tiocmget,
 | |
| 	.tiocmset          = ch341_tiocmset,
 | |
| 	.read_int_callback = ch341_read_int_callback,
 | |
| 	.attach            = ch341_attach,
 | |
| };
 | |
| 
 | |
| static int __init ch341_init(void)
 | |
| {
 | |
| 	int retval;
 | |
| 
 | |
| 	retval = usb_serial_register(&ch341_device);
 | |
| 	if (retval)
 | |
| 		return retval;
 | |
| 	retval = usb_register(&ch341_driver);
 | |
| 	if (retval)
 | |
| 		usb_serial_deregister(&ch341_device);
 | |
| 	return retval;
 | |
| }
 | |
| 
 | |
| static void __exit ch341_exit(void)
 | |
| {
 | |
| 	usb_deregister(&ch341_driver);
 | |
| 	usb_serial_deregister(&ch341_device);
 | |
| }
 | |
| 
 | |
| module_init(ch341_init);
 | |
| module_exit(ch341_exit);
 | |
| MODULE_LICENSE("GPL");
 | |
| 
 | |
| module_param(debug, bool, S_IRUGO | S_IWUSR);
 | |
| MODULE_PARM_DESC(debug, "Debug enabled or not");
 | |
| 
 | |
| /* EOF ch341.c */
 |