linux-loongson/include/uapi/linux/userfaultfd.h
Andrea Arcangeli adef440691 userfaultfd: UFFDIO_MOVE uABI
Implement the uABI of UFFDIO_MOVE ioctl.
UFFDIO_COPY performs ~20% better than UFFDIO_MOVE when the application
needs pages to be allocated [1]. However, with UFFDIO_MOVE, if pages are
available (in userspace) for recycling, as is usually the case in heap
compaction algorithms, then we can avoid the page allocation and memcpy
(done by UFFDIO_COPY). Also, since the pages are recycled in the
userspace, we avoid the need to release (via madvise) the pages back to
the kernel [2].

We see over 40% reduction (on a Google pixel 6 device) in the compacting
thread's completion time by using UFFDIO_MOVE vs.  UFFDIO_COPY.  This was
measured using a benchmark that emulates a heap compaction implementation
using userfaultfd (to allow concurrent accesses by application threads). 
More details of the usecase are explained in [2].  Furthermore,
UFFDIO_MOVE enables moving swapped-out pages without touching them within
the same vma.  Today, it can only be done by mremap, however it forces
splitting the vma.

[1] https://lore.kernel.org/all/1425575884-2574-1-git-send-email-aarcange@redhat.com/
[2] https://lore.kernel.org/linux-mm/CA+EESO4uO84SSnBhArH4HvLNhaUQ5nZKNKXqxRCyjniNVjp0Aw@mail.gmail.com/

Update for the ioctl_userfaultfd(2)  manpage:

   UFFDIO_MOVE
       (Since Linux xxx)  Move a continuous memory chunk into the
       userfault registered range and optionally wake up the blocked
       thread. The source and destination addresses and the number of
       bytes to move are specified by the src, dst, and len fields of
       the uffdio_move structure pointed to by argp:

           struct uffdio_move {
               __u64 dst;    /* Destination of move */
               __u64 src;    /* Source of move */
               __u64 len;    /* Number of bytes to move */
               __u64 mode;   /* Flags controlling behavior of move */
               __s64 move;   /* Number of bytes moved, or negated error */
           };

       The following value may be bitwise ORed in mode to change the
       behavior of the UFFDIO_MOVE operation:

       UFFDIO_MOVE_MODE_DONTWAKE
              Do not wake up the thread that waits for page-fault
              resolution

       UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES
              Allow holes in the source virtual range that is being moved.
              When not specified, the holes will result in ENOENT error.
              When specified, the holes will be accounted as successfully
              moved memory. This is mostly useful to move hugepage aligned
              virtual regions without knowing if there are transparent
              hugepages in the regions or not, but preventing the risk of
              having to split the hugepage during the operation.

       The move field is used by the kernel to return the number of
       bytes that was actually moved, or an error (a negated errno-
       style value).  If the value returned in move doesn't match the
       value that was specified in len, the operation fails with the
       error EAGAIN.  The move field is output-only; it is not read by
       the UFFDIO_MOVE operation.

       The operation may fail for various reasons. Usually, remapping of
       pages that are not exclusive to the given process fail; once KSM
       might deduplicate pages or fork() COW-shares pages during fork()
       with child processes, they are no longer exclusive. Further, the
       kernel might only perform lightweight checks for detecting whether
       the pages are exclusive, and return -EBUSY in case that check fails.
       To make the operation more likely to succeed, KSM should be
       disabled, fork() should be avoided or MADV_DONTFORK should be
       configured for the source VMA before fork().

       This ioctl(2) operation returns 0 on success.  In this case, the
       entire area was moved.  On error, -1 is returned and errno is
       set to indicate the error.  Possible errors include:

       EAGAIN The number of bytes moved (i.e., the value returned in
              the move field) does not equal the value that was
              specified in the len field.

       EINVAL Either dst or len was not a multiple of the system page
              size, or the range specified by src and len or dst and len
              was invalid.

       EINVAL An invalid bit was specified in the mode field.

       ENOENT
              The source virtual memory range has unmapped holes and
              UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES is not set.

       EEXIST
              The destination virtual memory range is fully or partially
              mapped.

       EBUSY
              The pages in the source virtual memory range are either
              pinned or not exclusive to the process. The kernel might
              only perform lightweight checks for detecting whether the
              pages are exclusive. To make the operation more likely to
              succeed, KSM should be disabled, fork() should be avoided
              or MADV_DONTFORK should be configured for the source virtual
              memory area before fork().

       ENOMEM Allocating memory needed for the operation failed.

       ESRCH
              The target process has exited at the time of a UFFDIO_MOVE
              operation.

Link: https://lkml.kernel.org/r/20231206103702.3873743-3-surenb@google.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29 11:58:24 -08:00

387 lines
12 KiB
C

/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
* include/linux/userfaultfd.h
*
* Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org>
* Copyright (C) 2015 Red Hat, Inc.
*
*/
#ifndef _LINUX_USERFAULTFD_H
#define _LINUX_USERFAULTFD_H
#include <linux/types.h>
/* ioctls for /dev/userfaultfd */
#define USERFAULTFD_IOC 0xAA
#define USERFAULTFD_IOC_NEW _IO(USERFAULTFD_IOC, 0x00)
/*
* If the UFFDIO_API is upgraded someday, the UFFDIO_UNREGISTER and
* UFFDIO_WAKE ioctls should be defined as _IOW and not as _IOR. In
* userfaultfd.h we assumed the kernel was reading (instead _IOC_READ
* means the userland is reading).
*/
#define UFFD_API ((__u64)0xAA)
#define UFFD_API_REGISTER_MODES (UFFDIO_REGISTER_MODE_MISSING | \
UFFDIO_REGISTER_MODE_WP | \
UFFDIO_REGISTER_MODE_MINOR)
#define UFFD_API_FEATURES (UFFD_FEATURE_PAGEFAULT_FLAG_WP | \
UFFD_FEATURE_EVENT_FORK | \
UFFD_FEATURE_EVENT_REMAP | \
UFFD_FEATURE_EVENT_REMOVE | \
UFFD_FEATURE_EVENT_UNMAP | \
UFFD_FEATURE_MISSING_HUGETLBFS | \
UFFD_FEATURE_MISSING_SHMEM | \
UFFD_FEATURE_SIGBUS | \
UFFD_FEATURE_THREAD_ID | \
UFFD_FEATURE_MINOR_HUGETLBFS | \
UFFD_FEATURE_MINOR_SHMEM | \
UFFD_FEATURE_EXACT_ADDRESS | \
UFFD_FEATURE_WP_HUGETLBFS_SHMEM | \
UFFD_FEATURE_WP_UNPOPULATED | \
UFFD_FEATURE_POISON | \
UFFD_FEATURE_WP_ASYNC | \
UFFD_FEATURE_MOVE)
#define UFFD_API_IOCTLS \
((__u64)1 << _UFFDIO_REGISTER | \
(__u64)1 << _UFFDIO_UNREGISTER | \
(__u64)1 << _UFFDIO_API)
#define UFFD_API_RANGE_IOCTLS \
((__u64)1 << _UFFDIO_WAKE | \
(__u64)1 << _UFFDIO_COPY | \
(__u64)1 << _UFFDIO_ZEROPAGE | \
(__u64)1 << _UFFDIO_MOVE | \
(__u64)1 << _UFFDIO_WRITEPROTECT | \
(__u64)1 << _UFFDIO_CONTINUE | \
(__u64)1 << _UFFDIO_POISON)
#define UFFD_API_RANGE_IOCTLS_BASIC \
((__u64)1 << _UFFDIO_WAKE | \
(__u64)1 << _UFFDIO_COPY | \
(__u64)1 << _UFFDIO_WRITEPROTECT | \
(__u64)1 << _UFFDIO_CONTINUE | \
(__u64)1 << _UFFDIO_POISON)
/*
* Valid ioctl command number range with this API is from 0x00 to
* 0x3F. UFFDIO_API is the fixed number, everything else can be
* changed by implementing a different UFFD_API. If sticking to the
* same UFFD_API more ioctl can be added and userland will be aware of
* which ioctl the running kernel implements through the ioctl command
* bitmask written by the UFFDIO_API.
*/
#define _UFFDIO_REGISTER (0x00)
#define _UFFDIO_UNREGISTER (0x01)
#define _UFFDIO_WAKE (0x02)
#define _UFFDIO_COPY (0x03)
#define _UFFDIO_ZEROPAGE (0x04)
#define _UFFDIO_MOVE (0x05)
#define _UFFDIO_WRITEPROTECT (0x06)
#define _UFFDIO_CONTINUE (0x07)
#define _UFFDIO_POISON (0x08)
#define _UFFDIO_API (0x3F)
/* userfaultfd ioctl ids */
#define UFFDIO 0xAA
#define UFFDIO_API _IOWR(UFFDIO, _UFFDIO_API, \
struct uffdio_api)
#define UFFDIO_REGISTER _IOWR(UFFDIO, _UFFDIO_REGISTER, \
struct uffdio_register)
#define UFFDIO_UNREGISTER _IOR(UFFDIO, _UFFDIO_UNREGISTER, \
struct uffdio_range)
#define UFFDIO_WAKE _IOR(UFFDIO, _UFFDIO_WAKE, \
struct uffdio_range)
#define UFFDIO_COPY _IOWR(UFFDIO, _UFFDIO_COPY, \
struct uffdio_copy)
#define UFFDIO_ZEROPAGE _IOWR(UFFDIO, _UFFDIO_ZEROPAGE, \
struct uffdio_zeropage)
#define UFFDIO_MOVE _IOWR(UFFDIO, _UFFDIO_MOVE, \
struct uffdio_move)
#define UFFDIO_WRITEPROTECT _IOWR(UFFDIO, _UFFDIO_WRITEPROTECT, \
struct uffdio_writeprotect)
#define UFFDIO_CONTINUE _IOWR(UFFDIO, _UFFDIO_CONTINUE, \
struct uffdio_continue)
#define UFFDIO_POISON _IOWR(UFFDIO, _UFFDIO_POISON, \
struct uffdio_poison)
/* read() structure */
struct uffd_msg {
__u8 event;
__u8 reserved1;
__u16 reserved2;
__u32 reserved3;
union {
struct {
__u64 flags;
__u64 address;
union {
__u32 ptid;
} feat;
} pagefault;
struct {
__u32 ufd;
} fork;
struct {
__u64 from;
__u64 to;
__u64 len;
} remap;
struct {
__u64 start;
__u64 end;
} remove;
struct {
/* unused reserved fields */
__u64 reserved1;
__u64 reserved2;
__u64 reserved3;
} reserved;
} arg;
} __packed;
/*
* Start at 0x12 and not at 0 to be more strict against bugs.
*/
#define UFFD_EVENT_PAGEFAULT 0x12
#define UFFD_EVENT_FORK 0x13
#define UFFD_EVENT_REMAP 0x14
#define UFFD_EVENT_REMOVE 0x15
#define UFFD_EVENT_UNMAP 0x16
/* flags for UFFD_EVENT_PAGEFAULT */
#define UFFD_PAGEFAULT_FLAG_WRITE (1<<0) /* If this was a write fault */
#define UFFD_PAGEFAULT_FLAG_WP (1<<1) /* If reason is VM_UFFD_WP */
#define UFFD_PAGEFAULT_FLAG_MINOR (1<<2) /* If reason is VM_UFFD_MINOR */
struct uffdio_api {
/* userland asks for an API number and the features to enable */
__u64 api;
/*
* Kernel answers below with the all available features for
* the API, this notifies userland of which events and/or
* which flags for each event are enabled in the current
* kernel.
*
* Note: UFFD_EVENT_PAGEFAULT and UFFD_PAGEFAULT_FLAG_WRITE
* are to be considered implicitly always enabled in all kernels as
* long as the uffdio_api.api requested matches UFFD_API.
*
* UFFD_FEATURE_MISSING_HUGETLBFS means an UFFDIO_REGISTER
* with UFFDIO_REGISTER_MODE_MISSING mode will succeed on
* hugetlbfs virtual memory ranges. Adding or not adding
* UFFD_FEATURE_MISSING_HUGETLBFS to uffdio_api.features has
* no real functional effect after UFFDIO_API returns, but
* it's only useful for an initial feature set probe at
* UFFDIO_API time. There are two ways to use it:
*
* 1) by adding UFFD_FEATURE_MISSING_HUGETLBFS to the
* uffdio_api.features before calling UFFDIO_API, an error
* will be returned by UFFDIO_API on a kernel without
* hugetlbfs missing support
*
* 2) the UFFD_FEATURE_MISSING_HUGETLBFS can not be added in
* uffdio_api.features and instead it will be set by the
* kernel in the uffdio_api.features if the kernel supports
* it, so userland can later check if the feature flag is
* present in uffdio_api.features after UFFDIO_API
* succeeded.
*
* UFFD_FEATURE_MISSING_SHMEM works the same as
* UFFD_FEATURE_MISSING_HUGETLBFS, but it applies to shmem
* (i.e. tmpfs and other shmem based APIs).
*
* UFFD_FEATURE_SIGBUS feature means no page-fault
* (UFFD_EVENT_PAGEFAULT) event will be delivered, instead
* a SIGBUS signal will be sent to the faulting process.
*
* UFFD_FEATURE_THREAD_ID pid of the page faulted task_struct will
* be returned, if feature is not requested 0 will be returned.
*
* UFFD_FEATURE_MINOR_HUGETLBFS indicates that minor faults
* can be intercepted (via REGISTER_MODE_MINOR) for
* hugetlbfs-backed pages.
*
* UFFD_FEATURE_MINOR_SHMEM indicates the same support as
* UFFD_FEATURE_MINOR_HUGETLBFS, but for shmem-backed pages instead.
*
* UFFD_FEATURE_EXACT_ADDRESS indicates that the exact address of page
* faults would be provided and the offset within the page would not be
* masked.
*
* UFFD_FEATURE_WP_HUGETLBFS_SHMEM indicates that userfaultfd
* write-protection mode is supported on both shmem and hugetlbfs.
*
* UFFD_FEATURE_WP_UNPOPULATED indicates that userfaultfd
* write-protection mode will always apply to unpopulated pages
* (i.e. empty ptes). This will be the default behavior for shmem
* & hugetlbfs, so this flag only affects anonymous memory behavior
* when userfault write-protection mode is registered.
*
* UFFD_FEATURE_WP_ASYNC indicates that userfaultfd write-protection
* asynchronous mode is supported in which the write fault is
* automatically resolved and write-protection is un-set.
* It implies UFFD_FEATURE_WP_UNPOPULATED.
*
* UFFD_FEATURE_MOVE indicates that the kernel supports moving an
* existing page contents from userspace.
*/
#define UFFD_FEATURE_PAGEFAULT_FLAG_WP (1<<0)
#define UFFD_FEATURE_EVENT_FORK (1<<1)
#define UFFD_FEATURE_EVENT_REMAP (1<<2)
#define UFFD_FEATURE_EVENT_REMOVE (1<<3)
#define UFFD_FEATURE_MISSING_HUGETLBFS (1<<4)
#define UFFD_FEATURE_MISSING_SHMEM (1<<5)
#define UFFD_FEATURE_EVENT_UNMAP (1<<6)
#define UFFD_FEATURE_SIGBUS (1<<7)
#define UFFD_FEATURE_THREAD_ID (1<<8)
#define UFFD_FEATURE_MINOR_HUGETLBFS (1<<9)
#define UFFD_FEATURE_MINOR_SHMEM (1<<10)
#define UFFD_FEATURE_EXACT_ADDRESS (1<<11)
#define UFFD_FEATURE_WP_HUGETLBFS_SHMEM (1<<12)
#define UFFD_FEATURE_WP_UNPOPULATED (1<<13)
#define UFFD_FEATURE_POISON (1<<14)
#define UFFD_FEATURE_WP_ASYNC (1<<15)
#define UFFD_FEATURE_MOVE (1<<16)
__u64 features;
__u64 ioctls;
};
struct uffdio_range {
__u64 start;
__u64 len;
};
struct uffdio_register {
struct uffdio_range range;
#define UFFDIO_REGISTER_MODE_MISSING ((__u64)1<<0)
#define UFFDIO_REGISTER_MODE_WP ((__u64)1<<1)
#define UFFDIO_REGISTER_MODE_MINOR ((__u64)1<<2)
__u64 mode;
/*
* kernel answers which ioctl commands are available for the
* range, keep at the end as the last 8 bytes aren't read.
*/
__u64 ioctls;
};
struct uffdio_copy {
__u64 dst;
__u64 src;
__u64 len;
#define UFFDIO_COPY_MODE_DONTWAKE ((__u64)1<<0)
/*
* UFFDIO_COPY_MODE_WP will map the page write protected on
* the fly. UFFDIO_COPY_MODE_WP is available only if the
* write protected ioctl is implemented for the range
* according to the uffdio_register.ioctls.
*/
#define UFFDIO_COPY_MODE_WP ((__u64)1<<1)
__u64 mode;
/*
* "copy" is written by the ioctl and must be at the end: the
* copy_from_user will not read the last 8 bytes.
*/
__s64 copy;
};
struct uffdio_zeropage {
struct uffdio_range range;
#define UFFDIO_ZEROPAGE_MODE_DONTWAKE ((__u64)1<<0)
__u64 mode;
/*
* "zeropage" is written by the ioctl and must be at the end:
* the copy_from_user will not read the last 8 bytes.
*/
__s64 zeropage;
};
struct uffdio_writeprotect {
struct uffdio_range range;
/*
* UFFDIO_WRITEPROTECT_MODE_WP: set the flag to write protect a range,
* unset the flag to undo protection of a range which was previously
* write protected.
*
* UFFDIO_WRITEPROTECT_MODE_DONTWAKE: set the flag to avoid waking up
* any wait thread after the operation succeeds.
*
* NOTE: Write protecting a region (WP=1) is unrelated to page faults,
* therefore DONTWAKE flag is meaningless with WP=1. Removing write
* protection (WP=0) in response to a page fault wakes the faulting
* task unless DONTWAKE is set.
*/
#define UFFDIO_WRITEPROTECT_MODE_WP ((__u64)1<<0)
#define UFFDIO_WRITEPROTECT_MODE_DONTWAKE ((__u64)1<<1)
__u64 mode;
};
struct uffdio_continue {
struct uffdio_range range;
#define UFFDIO_CONTINUE_MODE_DONTWAKE ((__u64)1<<0)
/*
* UFFDIO_CONTINUE_MODE_WP will map the page write protected on
* the fly. UFFDIO_CONTINUE_MODE_WP is available only if the
* write protected ioctl is implemented for the range
* according to the uffdio_register.ioctls.
*/
#define UFFDIO_CONTINUE_MODE_WP ((__u64)1<<1)
__u64 mode;
/*
* Fields below here are written by the ioctl and must be at the end:
* the copy_from_user will not read past here.
*/
__s64 mapped;
};
struct uffdio_poison {
struct uffdio_range range;
#define UFFDIO_POISON_MODE_DONTWAKE ((__u64)1<<0)
__u64 mode;
/*
* Fields below here are written by the ioctl and must be at the end:
* the copy_from_user will not read past here.
*/
__s64 updated;
};
struct uffdio_move {
__u64 dst;
__u64 src;
__u64 len;
/*
* Especially if used to atomically remove memory from the
* address space the wake on the dst range is not needed.
*/
#define UFFDIO_MOVE_MODE_DONTWAKE ((__u64)1<<0)
#define UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES ((__u64)1<<1)
__u64 mode;
/*
* "move" is written by the ioctl and must be at the end: the
* copy_from_user will not read the last 8 bytes.
*/
__s64 move;
};
/*
* Flags for the userfaultfd(2) system call itself.
*/
/*
* Create a userfaultfd that can handle page faults only in user mode.
*/
#define UFFD_USER_MODE_ONLY 1
#endif /* _LINUX_USERFAULTFD_H */