mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-27 15:36:48 +00:00

the diff is all the new Qualcomm clk drivers added for a few SoCs they're working on. The other two vendors with significant work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks to existing drivers and supports some new SoCs while Amlogic is starting a significant refactoring to simplify their code. The core framework gained a pair of helpers to get the 'struct device' or 'struct device_node' associated with a 'struct clk_hw'. Some associated KUnit tests were added for these simple helpers as well. Beyond that core change there are lots of little fixes throughout the clk drivers for the stuff we see every day, wrong clk driver data that affects tree topology or supported frequencies, etc. They're not found until the clks are actually used by some consumer device driver. New Drivers: - Global, display, gpu, video, camera, tcsr, and rpmh clock controller for the Qualcomm Milos SoC - Camera, display, GPU, and video clock controllers for Qualcomm QCS615 - Video clock controller driver for Qualcomm SM6350 - Camera clock controller driver for Qualcomm SC8180X - I3C clocks and resets on Renesas RZ/G3E - Expanded Serial Peripheral Interface (xSPI) clocks and resets on Renesas RZ/V2H(P) and RZ/V2N - SPI (RSPI) clocks and resets on Renesas RZ/V2H(P) - SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H - Ethernet clocks and resets on Renesas RZ/G3E - Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs - Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N - Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas RZ/V2N Updates: - Support atomic PWMs in the PWM clk driver - clk_hw_get_dev() and clk_hw_get_of_node() helpers - Replace round_rate() with determine_rate() in various clk drivers - Convert clk DT bindings to DT schema format for DT validation - Various clk driver cleanups and refactorings from static analysis tools and possibly real humans - A lot of little fixes here and there to things like clk tree topology, missing frequencies, flagging clks as critical, etc. The full details are in the commits and sub-tree merge logs -----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmiLljkUHHN3Ym95ZEBj aHJvbWl1bS5vcmcACgkQrQKIl8bklSVR1BAAm5hnFdYvNX/AYK+bNNbb/YkbveGr wxrZFjd/1QEZii7UBBOENLjvbrxT4N93TGuwuHOy+iz53X4mWg1BST0RENtmks9v rys7suEkDVA7KoDEbcvbUhLbLObEQvr3sxurl2mvq563y02hkJ+rt3kDqdCn/MFK fUfqZ79oPLaMULy3XwFyrEQEcxqQTX7i+j1atCB4TPmBSu3R5WMsCS+IVKPCuxCF qcan5hCXakv4gBE/jF9x/u28j0m9v16uB2O/7sH3uDzHo/FxShBmC53Bj2Mtaf2w lSKhEngCAMItU2LtruO2szpsmoy9EZTIqzELr5GJGXFDQDHiTzcigRtD5MCWjdG1 aapgWs47Yslh0M+d8Im81hu1YaLGDuoY7QiOVMN/htn0nPEozU1farKJbD3/gj9U C6648EXYa/dqDBRRHeqLi4n1RK0Fzb15VvsanKn1nLy+cOvzNI4bpJjEJlUQjZMN 8MzvzBgLNsydDQC5I8JAPPK2Fcdpk3KpchphZrXLZY8iRco5kvx1mRjh90Lvr8N8 rmpUC6p1BdEIGhL+NAh7qCz9DOKfsaFr13tHpqD/PItzfHIyd7mss+7GSD6WCa/b MduE9172Uq0mY8ZnWe0vV7/+s9GE7oTsxdMC6oF5yTXRIpog7evkUqNyXhpNTxgS C2DLCDhaqpHI28c= =S+dB -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This is the usual collection of primarily clk driver updates. The big part of the diff is all the new Qualcomm clk drivers added for a few SoCs they're working on. The other two vendors with significant work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks to existing drivers and supports some new SoCs while Amlogic is starting a significant refactoring to simplify their code. The core framework gained a pair of helpers to get the 'struct device' or 'struct device_node' associated with a 'struct clk_hw'. Some associated KUnit tests were added for these simple helpers as well. Beyond that core change there are lots of little fixes throughout the clk drivers for the stuff we see every day, wrong clk driver data that affects tree topology or supported frequencies, etc. They're not found until the clks are actually used by some consumer device driver. New Drivers: - Global, display, gpu, video, camera, tcsr, and rpmh clock controller for the Qualcomm Milos SoC - Camera, display, GPU, and video clock controllers for Qualcomm QCS615 - Video clock controller driver for Qualcomm SM6350 - Camera clock controller driver for Qualcomm SC8180X - I3C clocks and resets on Renesas RZ/G3E - Expanded Serial Peripheral Interface (xSPI) clocks and resets on Renesas RZ/V2H(P) and RZ/V2N - SPI (RSPI) clocks and resets on Renesas RZ/V2H(P) - SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H - Ethernet clocks and resets on Renesas RZ/G3E - Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs - Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N - Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas RZ/V2N Updates: - Support atomic PWMs in the PWM clk driver - clk_hw_get_dev() and clk_hw_get_of_node() helpers - Replace round_rate() with determine_rate() in various clk drivers - Convert clk DT bindings to DT schema format for DT validation - Various clk driver cleanups and refactorings from static analysis tools and possibly real humans - A lot of little fixes here and there to things like clk tree topology, missing frequencies, flagging clks as critical, etc" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits) clk: clocking-wizard: Fix the round rate handling for versal clk: Fix typos clk: spacemit: ccu_pll: fix error return value in recalc_rate callback clk: tegra: periph: Make tegra_clk_periph_ops static clk: tegra: periph: Fix error handling and resolve unsigned compare warning clk: imx: scu: convert from round_rate() to determine_rate() clk: imx: pllv4: convert from round_rate() to determine_rate() clk: imx: pllv3: convert from round_rate() to determine_rate() clk: imx: pllv2: convert from round_rate() to determine_rate() clk: imx: pll14xx: convert from round_rate() to determine_rate() clk: imx: pfd: convert from round_rate() to determine_rate() clk: imx: frac-pll: convert from round_rate() to determine_rate() clk: imx: fracn-gppll: convert from round_rate() to determine_rate() clk: imx: fixup-div: convert from round_rate() to determine_rate() clk: imx: cpu: convert from round_rate() to determine_rate() clk: imx: busy: convert from round_rate() to determine_rate() clk: imx: composite-93: remove round_rate() in favor of determine_rate() clk: imx: composite-8m: remove round_rate() in favor of determine_rate() clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls clk: imx: Remove redundant pm_runtime_mark_last_busy() calls ...
1046 lines
27 KiB
C
1046 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Analog Devices Generic AXI DAC IP core
|
|
* Link: https://wiki.analog.com/resources/fpga/docs/axi_dac_ip
|
|
*
|
|
* Copyright 2016-2024 Analog Devices Inc.
|
|
*/
|
|
#include <linux/adi-axi-common.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bits.h>
|
|
#include <linux/cleanup.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/limits.h>
|
|
#include <linux/kstrtox.h>
|
|
#include <linux/math.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/units.h>
|
|
|
|
#include <linux/iio/backend.h>
|
|
#include <linux/iio/buffer-dmaengine.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/iio.h>
|
|
|
|
#include "ad3552r-hs.h"
|
|
|
|
/*
|
|
* Register definitions:
|
|
* https://wiki.analog.com/resources/fpga/docs/axi_dac_ip#register_map
|
|
*/
|
|
|
|
/* Base controls */
|
|
#define AXI_DAC_CONFIG_REG 0x0c
|
|
#define AXI_DAC_CONFIG_DDS_DISABLE BIT(6)
|
|
|
|
/* DAC controls */
|
|
#define AXI_DAC_RSTN_REG 0x0040
|
|
#define AXI_DAC_RSTN_CE_N BIT(2)
|
|
#define AXI_DAC_RSTN_MMCM_RSTN BIT(1)
|
|
#define AXI_DAC_RSTN_RSTN BIT(0)
|
|
#define AXI_DAC_CNTRL_1_REG 0x0044
|
|
#define AXI_DAC_CNTRL_1_SYNC BIT(0)
|
|
#define AXI_DAC_CNTRL_2_REG 0x0048
|
|
#define AXI_DAC_CNTRL_2_SDR_DDR_N BIT(16)
|
|
#define AXI_DAC_CNTRL_2_SYMB_8B BIT(14)
|
|
#define ADI_DAC_CNTRL_2_R1_MODE BIT(5)
|
|
#define AXI_DAC_CNTRL_2_UNSIGNED_DATA BIT(4)
|
|
#define AXI_DAC_STATUS_1_REG 0x0054
|
|
#define AXI_DAC_STATUS_2_REG 0x0058
|
|
#define AXI_DAC_DRP_STATUS_REG 0x0074
|
|
#define AXI_DAC_DRP_STATUS_DRP_LOCKED BIT(17)
|
|
#define AXI_DAC_CUSTOM_RD_REG 0x0080
|
|
#define AXI_DAC_CUSTOM_WR_REG 0x0084
|
|
#define AXI_DAC_CUSTOM_WR_DATA_8 GENMASK(23, 16)
|
|
#define AXI_DAC_CUSTOM_WR_DATA_16 GENMASK(23, 8)
|
|
#define AXI_DAC_UI_STATUS_REG 0x0088
|
|
#define AXI_DAC_UI_STATUS_IF_BUSY BIT(4)
|
|
#define AXI_DAC_CUSTOM_CTRL_REG 0x008C
|
|
#define AXI_DAC_CUSTOM_CTRL_ADDRESS GENMASK(31, 24)
|
|
#define AXI_DAC_CUSTOM_CTRL_MULTI_IO_MODE GENMASK(3, 2)
|
|
#define AXI_DAC_CUSTOM_CTRL_STREAM BIT(1)
|
|
#define AXI_DAC_CUSTOM_CTRL_TRANSFER_DATA BIT(0)
|
|
|
|
#define AXI_DAC_CUSTOM_CTRL_STREAM_ENABLE (AXI_DAC_CUSTOM_CTRL_TRANSFER_DATA | \
|
|
AXI_DAC_CUSTOM_CTRL_STREAM)
|
|
|
|
/* DAC Channel controls */
|
|
#define AXI_DAC_CHAN_CNTRL_1_REG(c) (0x0400 + (c) * 0x40)
|
|
#define AXI_DAC_CHAN_CNTRL_3_REG(c) (0x0408 + (c) * 0x40)
|
|
#define AXI_DAC_CHAN_CNTRL_3_SCALE_SIGN BIT(15)
|
|
#define AXI_DAC_CHAN_CNTRL_3_SCALE_INT BIT(14)
|
|
#define AXI_DAC_CHAN_CNTRL_3_SCALE GENMASK(14, 0)
|
|
#define AXI_DAC_CHAN_CNTRL_2_REG(c) (0x0404 + (c) * 0x40)
|
|
#define AXI_DAC_CHAN_CNTRL_2_PHASE GENMASK(31, 16)
|
|
#define AXI_DAC_CHAN_CNTRL_2_FREQUENCY GENMASK(15, 0)
|
|
#define AXI_DAC_CHAN_CNTRL_4_REG(c) (0x040c + (c) * 0x40)
|
|
#define AXI_DAC_CHAN_CNTRL_7_REG(c) (0x0418 + (c) * 0x40)
|
|
#define AXI_DAC_CHAN_CNTRL_7_DATA_SEL GENMASK(3, 0)
|
|
|
|
#define AXI_DAC_CHAN_CNTRL_MAX 15
|
|
#define AXI_DAC_RD_ADDR(x) (BIT(7) | (x))
|
|
|
|
/* 360 degrees in rad */
|
|
#define AXI_DAC_2_PI_MEGA 6283190
|
|
|
|
enum {
|
|
AXI_DAC_DATA_INTERNAL_TONE,
|
|
AXI_DAC_DATA_DMA = 2,
|
|
AXI_DAC_DATA_INTERNAL_RAMP_16BIT = 11,
|
|
};
|
|
|
|
struct axi_dac_info {
|
|
unsigned int version;
|
|
const struct iio_backend_info *backend_info;
|
|
bool has_dac_clk;
|
|
bool has_child_nodes;
|
|
};
|
|
|
|
struct axi_dac_state {
|
|
struct regmap *regmap;
|
|
struct device *dev;
|
|
/*
|
|
* lock to protect multiple accesses to the device registers and global
|
|
* data/variables.
|
|
*/
|
|
struct mutex lock;
|
|
const struct axi_dac_info *info;
|
|
u64 dac_clk;
|
|
u32 reg_config;
|
|
bool int_tone;
|
|
int dac_clk_rate;
|
|
};
|
|
|
|
static int axi_dac_enable(struct iio_backend *back)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
unsigned int __val;
|
|
int ret;
|
|
|
|
guard(mutex)(&st->lock);
|
|
ret = regmap_set_bits(st->regmap, AXI_DAC_RSTN_REG,
|
|
AXI_DAC_RSTN_MMCM_RSTN);
|
|
if (ret)
|
|
return ret;
|
|
/*
|
|
* Make sure the DRP (Dynamic Reconfiguration Port) is locked. Not all
|
|
* designs really use it but if they don't we still get the lock bit
|
|
* set. So let's do it all the time so the code is generic.
|
|
*/
|
|
ret = regmap_read_poll_timeout(st->regmap, AXI_DAC_DRP_STATUS_REG,
|
|
__val,
|
|
__val & AXI_DAC_DRP_STATUS_DRP_LOCKED,
|
|
100, 1000);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regmap_set_bits(st->regmap, AXI_DAC_RSTN_REG,
|
|
AXI_DAC_RSTN_RSTN | AXI_DAC_RSTN_MMCM_RSTN);
|
|
}
|
|
|
|
static void axi_dac_disable(struct iio_backend *back)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
|
|
guard(mutex)(&st->lock);
|
|
regmap_write(st->regmap, AXI_DAC_RSTN_REG, 0);
|
|
}
|
|
|
|
static struct iio_buffer *axi_dac_request_buffer(struct iio_backend *back,
|
|
struct iio_dev *indio_dev)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
const char *dma_name;
|
|
|
|
if (device_property_read_string(st->dev, "dma-names", &dma_name))
|
|
dma_name = "tx";
|
|
|
|
return iio_dmaengine_buffer_setup_ext(st->dev, indio_dev, dma_name,
|
|
IIO_BUFFER_DIRECTION_OUT);
|
|
}
|
|
|
|
static void axi_dac_free_buffer(struct iio_backend *back,
|
|
struct iio_buffer *buffer)
|
|
{
|
|
iio_dmaengine_buffer_teardown(buffer);
|
|
}
|
|
|
|
enum {
|
|
AXI_DAC_FREQ_TONE_1,
|
|
AXI_DAC_FREQ_TONE_2,
|
|
AXI_DAC_SCALE_TONE_1,
|
|
AXI_DAC_SCALE_TONE_2,
|
|
AXI_DAC_PHASE_TONE_1,
|
|
AXI_DAC_PHASE_TONE_2,
|
|
};
|
|
|
|
static int __axi_dac_frequency_get(struct axi_dac_state *st, unsigned int chan,
|
|
unsigned int tone_2, unsigned int *freq)
|
|
{
|
|
u32 reg, raw;
|
|
int ret;
|
|
|
|
if (chan > AXI_DAC_CHAN_CNTRL_MAX)
|
|
return -EINVAL;
|
|
|
|
if (!st->dac_clk) {
|
|
dev_err(st->dev, "Sampling rate is 0...\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (tone_2)
|
|
reg = AXI_DAC_CHAN_CNTRL_4_REG(chan);
|
|
else
|
|
reg = AXI_DAC_CHAN_CNTRL_2_REG(chan);
|
|
|
|
ret = regmap_read(st->regmap, reg, &raw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
raw = FIELD_GET(AXI_DAC_CHAN_CNTRL_2_FREQUENCY, raw);
|
|
*freq = DIV_ROUND_CLOSEST_ULL(raw * st->dac_clk, BIT(16));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axi_dac_frequency_get(struct axi_dac_state *st,
|
|
const struct iio_chan_spec *chan, char *buf,
|
|
unsigned int tone_2)
|
|
{
|
|
unsigned int freq;
|
|
int ret;
|
|
|
|
scoped_guard(mutex, &st->lock) {
|
|
ret = __axi_dac_frequency_get(st, chan->channel, tone_2, &freq);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return sysfs_emit(buf, "%u\n", freq);
|
|
}
|
|
|
|
static int axi_dac_scale_get(struct axi_dac_state *st,
|
|
const struct iio_chan_spec *chan, char *buf,
|
|
unsigned int tone_2)
|
|
{
|
|
unsigned int scale, sign;
|
|
int ret, vals[2];
|
|
u32 reg, raw;
|
|
|
|
if (chan->channel > AXI_DAC_CHAN_CNTRL_MAX)
|
|
return -EINVAL;
|
|
|
|
if (tone_2)
|
|
reg = AXI_DAC_CHAN_CNTRL_3_REG(chan->channel);
|
|
else
|
|
reg = AXI_DAC_CHAN_CNTRL_1_REG(chan->channel);
|
|
|
|
ret = regmap_read(st->regmap, reg, &raw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sign = FIELD_GET(AXI_DAC_CHAN_CNTRL_3_SCALE_SIGN, raw);
|
|
raw = FIELD_GET(AXI_DAC_CHAN_CNTRL_3_SCALE, raw);
|
|
scale = DIV_ROUND_CLOSEST_ULL((u64)raw * MEGA,
|
|
AXI_DAC_CHAN_CNTRL_3_SCALE_INT);
|
|
|
|
vals[0] = scale / MEGA;
|
|
vals[1] = scale % MEGA;
|
|
|
|
if (sign) {
|
|
vals[0] *= -1;
|
|
if (!vals[0])
|
|
vals[1] *= -1;
|
|
}
|
|
|
|
return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO, ARRAY_SIZE(vals),
|
|
vals);
|
|
}
|
|
|
|
static int axi_dac_phase_get(struct axi_dac_state *st,
|
|
const struct iio_chan_spec *chan, char *buf,
|
|
unsigned int tone_2)
|
|
{
|
|
u32 reg, raw, phase;
|
|
int ret, vals[2];
|
|
|
|
if (chan->channel > AXI_DAC_CHAN_CNTRL_MAX)
|
|
return -EINVAL;
|
|
|
|
if (tone_2)
|
|
reg = AXI_DAC_CHAN_CNTRL_4_REG(chan->channel);
|
|
else
|
|
reg = AXI_DAC_CHAN_CNTRL_2_REG(chan->channel);
|
|
|
|
ret = regmap_read(st->regmap, reg, &raw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
raw = FIELD_GET(AXI_DAC_CHAN_CNTRL_2_PHASE, raw);
|
|
phase = DIV_ROUND_CLOSEST_ULL((u64)raw * AXI_DAC_2_PI_MEGA, U16_MAX);
|
|
|
|
vals[0] = phase / MEGA;
|
|
vals[1] = phase % MEGA;
|
|
|
|
return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO, ARRAY_SIZE(vals),
|
|
vals);
|
|
}
|
|
|
|
static int __axi_dac_frequency_set(struct axi_dac_state *st, unsigned int chan,
|
|
u64 sample_rate, unsigned int freq,
|
|
unsigned int tone_2)
|
|
{
|
|
u32 reg;
|
|
u16 raw;
|
|
int ret;
|
|
|
|
if (chan > AXI_DAC_CHAN_CNTRL_MAX)
|
|
return -EINVAL;
|
|
|
|
if (!sample_rate || freq > sample_rate / 2) {
|
|
dev_err(st->dev, "Invalid frequency(%u) dac_clk(%llu)\n",
|
|
freq, sample_rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (tone_2)
|
|
reg = AXI_DAC_CHAN_CNTRL_4_REG(chan);
|
|
else
|
|
reg = AXI_DAC_CHAN_CNTRL_2_REG(chan);
|
|
|
|
raw = DIV64_U64_ROUND_CLOSEST((u64)freq * BIT(16), sample_rate);
|
|
|
|
ret = regmap_update_bits(st->regmap, reg,
|
|
AXI_DAC_CHAN_CNTRL_2_FREQUENCY, raw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* synchronize channels */
|
|
return regmap_set_bits(st->regmap, AXI_DAC_CNTRL_1_REG,
|
|
AXI_DAC_CNTRL_1_SYNC);
|
|
}
|
|
|
|
static int axi_dac_frequency_set(struct axi_dac_state *st,
|
|
const struct iio_chan_spec *chan,
|
|
const char *buf, size_t len, unsigned int tone_2)
|
|
{
|
|
unsigned int freq;
|
|
int ret;
|
|
|
|
ret = kstrtou32(buf, 10, &freq);
|
|
if (ret)
|
|
return ret;
|
|
|
|
guard(mutex)(&st->lock);
|
|
ret = __axi_dac_frequency_set(st, chan->channel, st->dac_clk, freq,
|
|
tone_2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return len;
|
|
}
|
|
|
|
static int axi_dac_scale_set(struct axi_dac_state *st,
|
|
const struct iio_chan_spec *chan,
|
|
const char *buf, size_t len, unsigned int tone_2)
|
|
{
|
|
int integer, frac, scale;
|
|
u32 raw = 0, reg;
|
|
int ret;
|
|
|
|
if (chan->channel > AXI_DAC_CHAN_CNTRL_MAX)
|
|
return -EINVAL;
|
|
|
|
ret = iio_str_to_fixpoint(buf, 100000, &integer, &frac);
|
|
if (ret)
|
|
return ret;
|
|
|
|
scale = integer * MEGA + frac;
|
|
if (scale <= -2 * (int)MEGA || scale >= 2 * (int)MEGA)
|
|
return -EINVAL;
|
|
|
|
/* format is 1.1.14 (sign, integer and fractional bits) */
|
|
if (scale < 0) {
|
|
raw = FIELD_PREP(AXI_DAC_CHAN_CNTRL_3_SCALE_SIGN, 1);
|
|
scale *= -1;
|
|
}
|
|
|
|
raw |= div_u64((u64)scale * AXI_DAC_CHAN_CNTRL_3_SCALE_INT, MEGA);
|
|
|
|
if (tone_2)
|
|
reg = AXI_DAC_CHAN_CNTRL_3_REG(chan->channel);
|
|
else
|
|
reg = AXI_DAC_CHAN_CNTRL_1_REG(chan->channel);
|
|
|
|
guard(mutex)(&st->lock);
|
|
ret = regmap_write(st->regmap, reg, raw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* synchronize channels */
|
|
ret = regmap_set_bits(st->regmap, AXI_DAC_CNTRL_1_REG,
|
|
AXI_DAC_CNTRL_1_SYNC);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return len;
|
|
}
|
|
|
|
static int axi_dac_phase_set(struct axi_dac_state *st,
|
|
const struct iio_chan_spec *chan,
|
|
const char *buf, size_t len, unsigned int tone_2)
|
|
{
|
|
int integer, frac, phase;
|
|
u32 raw, reg;
|
|
int ret;
|
|
|
|
if (chan->channel > AXI_DAC_CHAN_CNTRL_MAX)
|
|
return -EINVAL;
|
|
|
|
ret = iio_str_to_fixpoint(buf, 100000, &integer, &frac);
|
|
if (ret)
|
|
return ret;
|
|
|
|
phase = integer * MEGA + frac;
|
|
if (phase < 0 || phase > AXI_DAC_2_PI_MEGA)
|
|
return -EINVAL;
|
|
|
|
raw = DIV_ROUND_CLOSEST_ULL((u64)phase * U16_MAX, AXI_DAC_2_PI_MEGA);
|
|
|
|
if (tone_2)
|
|
reg = AXI_DAC_CHAN_CNTRL_4_REG(chan->channel);
|
|
else
|
|
reg = AXI_DAC_CHAN_CNTRL_2_REG(chan->channel);
|
|
|
|
guard(mutex)(&st->lock);
|
|
ret = regmap_update_bits(st->regmap, reg, AXI_DAC_CHAN_CNTRL_2_PHASE,
|
|
FIELD_PREP(AXI_DAC_CHAN_CNTRL_2_PHASE, raw));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* synchronize channels */
|
|
ret = regmap_set_bits(st->regmap, AXI_DAC_CNTRL_1_REG,
|
|
AXI_DAC_CNTRL_1_SYNC);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return len;
|
|
}
|
|
|
|
static int axi_dac_ext_info_set(struct iio_backend *back, uintptr_t private,
|
|
const struct iio_chan_spec *chan,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
|
|
switch (private) {
|
|
case AXI_DAC_FREQ_TONE_1:
|
|
case AXI_DAC_FREQ_TONE_2:
|
|
return axi_dac_frequency_set(st, chan, buf, len,
|
|
private == AXI_DAC_FREQ_TONE_2);
|
|
case AXI_DAC_SCALE_TONE_1:
|
|
case AXI_DAC_SCALE_TONE_2:
|
|
return axi_dac_scale_set(st, chan, buf, len,
|
|
private == AXI_DAC_SCALE_TONE_2);
|
|
case AXI_DAC_PHASE_TONE_1:
|
|
case AXI_DAC_PHASE_TONE_2:
|
|
return axi_dac_phase_set(st, chan, buf, len,
|
|
private == AXI_DAC_PHASE_TONE_2);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int axi_dac_ext_info_get(struct iio_backend *back, uintptr_t private,
|
|
const struct iio_chan_spec *chan, char *buf)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
|
|
switch (private) {
|
|
case AXI_DAC_FREQ_TONE_1:
|
|
case AXI_DAC_FREQ_TONE_2:
|
|
return axi_dac_frequency_get(st, chan, buf,
|
|
private - AXI_DAC_FREQ_TONE_1);
|
|
case AXI_DAC_SCALE_TONE_1:
|
|
case AXI_DAC_SCALE_TONE_2:
|
|
return axi_dac_scale_get(st, chan, buf,
|
|
private - AXI_DAC_SCALE_TONE_1);
|
|
case AXI_DAC_PHASE_TONE_1:
|
|
case AXI_DAC_PHASE_TONE_2:
|
|
return axi_dac_phase_get(st, chan, buf,
|
|
private - AXI_DAC_PHASE_TONE_1);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static const struct iio_chan_spec_ext_info axi_dac_ext_info[] = {
|
|
IIO_BACKEND_EX_INFO("frequency0", IIO_SEPARATE, AXI_DAC_FREQ_TONE_1),
|
|
IIO_BACKEND_EX_INFO("frequency1", IIO_SEPARATE, AXI_DAC_FREQ_TONE_2),
|
|
IIO_BACKEND_EX_INFO("scale0", IIO_SEPARATE, AXI_DAC_SCALE_TONE_1),
|
|
IIO_BACKEND_EX_INFO("scale1", IIO_SEPARATE, AXI_DAC_SCALE_TONE_2),
|
|
IIO_BACKEND_EX_INFO("phase0", IIO_SEPARATE, AXI_DAC_PHASE_TONE_1),
|
|
IIO_BACKEND_EX_INFO("phase1", IIO_SEPARATE, AXI_DAC_PHASE_TONE_2),
|
|
{ }
|
|
};
|
|
|
|
static int axi_dac_extend_chan(struct iio_backend *back,
|
|
struct iio_chan_spec *chan)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
|
|
if (chan->type != IIO_ALTVOLTAGE)
|
|
return -EINVAL;
|
|
if (st->reg_config & AXI_DAC_CONFIG_DDS_DISABLE)
|
|
/* nothing to extend */
|
|
return 0;
|
|
|
|
chan->ext_info = axi_dac_ext_info;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axi_dac_data_source_set(struct iio_backend *back, unsigned int chan,
|
|
enum iio_backend_data_source data)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
|
|
if (chan > AXI_DAC_CHAN_CNTRL_MAX)
|
|
return -EINVAL;
|
|
|
|
switch (data) {
|
|
case IIO_BACKEND_INTERNAL_CONTINUOUS_WAVE:
|
|
return regmap_update_bits(st->regmap,
|
|
AXI_DAC_CHAN_CNTRL_7_REG(chan),
|
|
AXI_DAC_CHAN_CNTRL_7_DATA_SEL,
|
|
AXI_DAC_DATA_INTERNAL_TONE);
|
|
case IIO_BACKEND_EXTERNAL:
|
|
return regmap_update_bits(st->regmap,
|
|
AXI_DAC_CHAN_CNTRL_7_REG(chan),
|
|
AXI_DAC_CHAN_CNTRL_7_DATA_SEL,
|
|
AXI_DAC_DATA_DMA);
|
|
case IIO_BACKEND_INTERNAL_RAMP_16BIT:
|
|
return regmap_update_bits(st->regmap,
|
|
AXI_DAC_CHAN_CNTRL_7_REG(chan),
|
|
AXI_DAC_CHAN_CNTRL_7_DATA_SEL,
|
|
AXI_DAC_DATA_INTERNAL_RAMP_16BIT);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int axi_dac_data_source_get(struct iio_backend *back, unsigned int chan,
|
|
enum iio_backend_data_source *data)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
int ret;
|
|
u32 val;
|
|
|
|
if (chan > AXI_DAC_CHAN_CNTRL_MAX)
|
|
return -EINVAL;
|
|
|
|
ret = regmap_read(st->regmap, AXI_DAC_CHAN_CNTRL_7_REG(chan), &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (val) {
|
|
case AXI_DAC_DATA_INTERNAL_TONE:
|
|
*data = IIO_BACKEND_INTERNAL_CONTINUOUS_WAVE;
|
|
return 0;
|
|
case AXI_DAC_DATA_DMA:
|
|
*data = IIO_BACKEND_EXTERNAL;
|
|
return 0;
|
|
case AXI_DAC_DATA_INTERNAL_RAMP_16BIT:
|
|
*data = IIO_BACKEND_INTERNAL_RAMP_16BIT;
|
|
return 0;
|
|
default:
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
static int axi_dac_set_sample_rate(struct iio_backend *back, unsigned int chan,
|
|
u64 sample_rate)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
unsigned int freq;
|
|
int ret, tone;
|
|
|
|
if (chan > AXI_DAC_CHAN_CNTRL_MAX)
|
|
return -EINVAL;
|
|
if (!sample_rate)
|
|
return -EINVAL;
|
|
if (st->reg_config & AXI_DAC_CONFIG_DDS_DISABLE)
|
|
/* sample_rate has no meaning if DDS is disabled */
|
|
return 0;
|
|
|
|
guard(mutex)(&st->lock);
|
|
/*
|
|
* If dac_clk is 0 then this must be the first time we're being notified
|
|
* about the interface sample rate. Hence, just update our internal
|
|
* variable and bail... If it's not 0, then we get the current DDS
|
|
* frequency (for the old rate) and update the registers for the new
|
|
* sample rate.
|
|
*/
|
|
if (!st->dac_clk) {
|
|
st->dac_clk = sample_rate;
|
|
return 0;
|
|
}
|
|
|
|
for (tone = 0; tone <= AXI_DAC_FREQ_TONE_2; tone++) {
|
|
ret = __axi_dac_frequency_get(st, chan, tone, &freq);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = __axi_dac_frequency_set(st, chan, sample_rate, tone, freq);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
st->dac_clk = sample_rate;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axi_dac_reg_access(struct iio_backend *back, unsigned int reg,
|
|
unsigned int writeval, unsigned int *readval)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
|
|
if (readval)
|
|
return regmap_read(st->regmap, reg, readval);
|
|
|
|
return regmap_write(st->regmap, reg, writeval);
|
|
}
|
|
|
|
static int axi_dac_ddr_enable(struct iio_backend *back)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
|
|
return regmap_clear_bits(st->regmap, AXI_DAC_CNTRL_2_REG,
|
|
AXI_DAC_CNTRL_2_SDR_DDR_N);
|
|
}
|
|
|
|
static int axi_dac_ddr_disable(struct iio_backend *back)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
|
|
return regmap_set_bits(st->regmap, AXI_DAC_CNTRL_2_REG,
|
|
AXI_DAC_CNTRL_2_SDR_DDR_N);
|
|
}
|
|
|
|
static int axi_dac_wait_bus_free(struct axi_dac_state *st)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
|
|
ret = regmap_read_poll_timeout(st->regmap, AXI_DAC_UI_STATUS_REG, val,
|
|
FIELD_GET(AXI_DAC_UI_STATUS_IF_BUSY, val) == 0, 10,
|
|
100 * KILO);
|
|
if (ret == -ETIMEDOUT)
|
|
dev_err(st->dev, "AXI bus timeout\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int axi_dac_data_stream_enable(struct iio_backend *back)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
int ret;
|
|
|
|
ret = axi_dac_wait_bus_free(st);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regmap_set_bits(st->regmap, AXI_DAC_CUSTOM_CTRL_REG,
|
|
AXI_DAC_CUSTOM_CTRL_STREAM_ENABLE);
|
|
}
|
|
|
|
static int axi_dac_data_stream_disable(struct iio_backend *back)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
|
|
return regmap_clear_bits(st->regmap, AXI_DAC_CUSTOM_CTRL_REG,
|
|
AXI_DAC_CUSTOM_CTRL_STREAM_ENABLE);
|
|
}
|
|
|
|
static int axi_dac_data_transfer_addr(struct iio_backend *back, u32 address)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
|
|
if (address > FIELD_MAX(AXI_DAC_CUSTOM_CTRL_ADDRESS))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Sample register address, when the DAC is configured, or stream
|
|
* start address when the FSM is in stream state.
|
|
*/
|
|
return regmap_update_bits(st->regmap, AXI_DAC_CUSTOM_CTRL_REG,
|
|
AXI_DAC_CUSTOM_CTRL_ADDRESS,
|
|
FIELD_PREP(AXI_DAC_CUSTOM_CTRL_ADDRESS,
|
|
address));
|
|
}
|
|
|
|
static int axi_dac_data_format_set(struct iio_backend *back, unsigned int ch,
|
|
const struct iio_backend_data_fmt *data)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
|
|
switch (data->type) {
|
|
case IIO_BACKEND_DATA_UNSIGNED:
|
|
return regmap_clear_bits(st->regmap, AXI_DAC_CNTRL_2_REG,
|
|
AXI_DAC_CNTRL_2_UNSIGNED_DATA);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int __axi_dac_bus_reg_write(struct iio_backend *back, u32 reg,
|
|
u32 val, size_t data_size)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
int ret;
|
|
u32 ival;
|
|
|
|
/*
|
|
* Both AXI_DAC_CNTRL_2_REG and AXI_DAC_CUSTOM_WR_REG need to know
|
|
* the data size. So keeping data size control here only,
|
|
* since data size is mandatory for the current transfer.
|
|
* DDR state handled separately by specific backend calls,
|
|
* generally all raw register writes are SDR.
|
|
*/
|
|
if (data_size == sizeof(u16))
|
|
ival = FIELD_PREP(AXI_DAC_CUSTOM_WR_DATA_16, val);
|
|
else
|
|
ival = FIELD_PREP(AXI_DAC_CUSTOM_WR_DATA_8, val);
|
|
|
|
ret = regmap_write(st->regmap, AXI_DAC_CUSTOM_WR_REG, ival);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (data_size == sizeof(u8))
|
|
ret = regmap_set_bits(st->regmap, AXI_DAC_CNTRL_2_REG,
|
|
AXI_DAC_CNTRL_2_SYMB_8B);
|
|
else
|
|
ret = regmap_clear_bits(st->regmap, AXI_DAC_CNTRL_2_REG,
|
|
AXI_DAC_CNTRL_2_SYMB_8B);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(st->regmap, AXI_DAC_CUSTOM_CTRL_REG,
|
|
AXI_DAC_CUSTOM_CTRL_ADDRESS,
|
|
FIELD_PREP(AXI_DAC_CUSTOM_CTRL_ADDRESS, reg));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(st->regmap, AXI_DAC_CUSTOM_CTRL_REG,
|
|
AXI_DAC_CUSTOM_CTRL_TRANSFER_DATA,
|
|
AXI_DAC_CUSTOM_CTRL_TRANSFER_DATA);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = axi_dac_wait_bus_free(st);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Cleaning always AXI_DAC_CUSTOM_CTRL_TRANSFER_DATA */
|
|
return regmap_clear_bits(st->regmap, AXI_DAC_CUSTOM_CTRL_REG,
|
|
AXI_DAC_CUSTOM_CTRL_TRANSFER_DATA);
|
|
}
|
|
|
|
static int axi_dac_bus_reg_write(struct iio_backend *back, u32 reg,
|
|
u32 val, size_t data_size)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
|
|
guard(mutex)(&st->lock);
|
|
return __axi_dac_bus_reg_write(back, reg, val, data_size);
|
|
}
|
|
|
|
static int axi_dac_bus_reg_read(struct iio_backend *back, u32 reg, u32 *val,
|
|
size_t data_size)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
int ret;
|
|
|
|
guard(mutex)(&st->lock);
|
|
|
|
/*
|
|
* SPI, we write with read flag, then we read just at the AXI
|
|
* io address space to get data read.
|
|
*/
|
|
ret = __axi_dac_bus_reg_write(back, AXI_DAC_RD_ADDR(reg), 0,
|
|
data_size);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = axi_dac_wait_bus_free(st);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return regmap_read(st->regmap, AXI_DAC_CUSTOM_RD_REG, val);
|
|
}
|
|
|
|
static int axi_dac_bus_set_io_mode(struct iio_backend *back,
|
|
enum ad3552r_io_mode mode)
|
|
{
|
|
struct axi_dac_state *st = iio_backend_get_priv(back);
|
|
int ret;
|
|
|
|
if (mode > AD3552R_IO_MODE_QSPI)
|
|
return -EINVAL;
|
|
|
|
guard(mutex)(&st->lock);
|
|
|
|
ret = regmap_update_bits(st->regmap, AXI_DAC_CUSTOM_CTRL_REG,
|
|
AXI_DAC_CUSTOM_CTRL_MULTI_IO_MODE,
|
|
FIELD_PREP(AXI_DAC_CUSTOM_CTRL_MULTI_IO_MODE, mode));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return axi_dac_wait_bus_free(st);
|
|
}
|
|
|
|
static void axi_dac_child_remove(void *data)
|
|
{
|
|
platform_device_unregister(data);
|
|
}
|
|
|
|
static int axi_dac_create_platform_device(struct axi_dac_state *st,
|
|
struct fwnode_handle *child)
|
|
{
|
|
struct ad3552r_hs_platform_data pdata = {
|
|
.bus_reg_read = axi_dac_bus_reg_read,
|
|
.bus_reg_write = axi_dac_bus_reg_write,
|
|
.bus_set_io_mode = axi_dac_bus_set_io_mode,
|
|
.bus_sample_data_clock_hz = st->dac_clk_rate,
|
|
};
|
|
struct platform_device_info pi = {
|
|
.parent = st->dev,
|
|
.name = fwnode_get_name(child),
|
|
.id = PLATFORM_DEVID_AUTO,
|
|
.fwnode = child,
|
|
.data = &pdata,
|
|
.size_data = sizeof(pdata),
|
|
};
|
|
struct platform_device *pdev;
|
|
|
|
pdev = platform_device_register_full(&pi);
|
|
if (IS_ERR(pdev))
|
|
return PTR_ERR(pdev);
|
|
|
|
return devm_add_action_or_reset(st->dev, axi_dac_child_remove, pdev);
|
|
}
|
|
|
|
static const struct iio_backend_ops axi_dac_generic_ops = {
|
|
.enable = axi_dac_enable,
|
|
.disable = axi_dac_disable,
|
|
.request_buffer = axi_dac_request_buffer,
|
|
.free_buffer = axi_dac_free_buffer,
|
|
.extend_chan_spec = axi_dac_extend_chan,
|
|
.ext_info_set = axi_dac_ext_info_set,
|
|
.ext_info_get = axi_dac_ext_info_get,
|
|
.data_source_set = axi_dac_data_source_set,
|
|
.set_sample_rate = axi_dac_set_sample_rate,
|
|
.debugfs_reg_access = iio_backend_debugfs_ptr(axi_dac_reg_access),
|
|
};
|
|
|
|
static const struct iio_backend_ops axi_ad3552r_ops = {
|
|
.enable = axi_dac_enable,
|
|
.disable = axi_dac_disable,
|
|
.request_buffer = axi_dac_request_buffer,
|
|
.free_buffer = axi_dac_free_buffer,
|
|
.data_source_set = axi_dac_data_source_set,
|
|
.data_source_get = axi_dac_data_source_get,
|
|
.ddr_enable = axi_dac_ddr_enable,
|
|
.ddr_disable = axi_dac_ddr_disable,
|
|
.data_stream_enable = axi_dac_data_stream_enable,
|
|
.data_stream_disable = axi_dac_data_stream_disable,
|
|
.data_format_set = axi_dac_data_format_set,
|
|
.data_transfer_addr = axi_dac_data_transfer_addr,
|
|
};
|
|
|
|
static const struct iio_backend_info axi_dac_generic = {
|
|
.name = "axi-dac",
|
|
.ops = &axi_dac_generic_ops,
|
|
};
|
|
|
|
static const struct iio_backend_info axi_ad3552r = {
|
|
.name = "axi-ad3552r",
|
|
.ops = &axi_ad3552r_ops,
|
|
};
|
|
|
|
static const struct regmap_config axi_dac_regmap_config = {
|
|
.val_bits = 32,
|
|
.reg_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = 0x0800,
|
|
};
|
|
|
|
static int axi_dac_probe(struct platform_device *pdev)
|
|
{
|
|
struct axi_dac_state *st;
|
|
void __iomem *base;
|
|
unsigned int ver;
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
st = devm_kzalloc(&pdev->dev, sizeof(*st), GFP_KERNEL);
|
|
if (!st)
|
|
return -ENOMEM;
|
|
|
|
st->info = device_get_match_data(&pdev->dev);
|
|
if (!st->info)
|
|
return -ENODEV;
|
|
clk = devm_clk_get_enabled(&pdev->dev, "s_axi_aclk");
|
|
if (IS_ERR(clk)) {
|
|
/* Backward compat., old fdt versions without clock-names. */
|
|
clk = devm_clk_get_enabled(&pdev->dev, NULL);
|
|
if (IS_ERR(clk))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(clk),
|
|
"failed to get clock\n");
|
|
}
|
|
|
|
if (st->info->has_dac_clk) {
|
|
struct clk *dac_clk;
|
|
|
|
dac_clk = devm_clk_get_enabled(&pdev->dev, "dac_clk");
|
|
if (IS_ERR(dac_clk))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(dac_clk),
|
|
"failed to get dac_clk clock\n");
|
|
|
|
/* We only care about the streaming mode rate */
|
|
st->dac_clk_rate = clk_get_rate(dac_clk) / 2;
|
|
}
|
|
|
|
base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
st->dev = &pdev->dev;
|
|
st->regmap = devm_regmap_init_mmio(&pdev->dev, base,
|
|
&axi_dac_regmap_config);
|
|
if (IS_ERR(st->regmap))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(st->regmap),
|
|
"failed to init register map\n");
|
|
|
|
/*
|
|
* Force disable the core. Up to the frontend to enable us. And we can
|
|
* still read/write registers...
|
|
*/
|
|
ret = regmap_write(st->regmap, AXI_DAC_RSTN_REG, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_read(st->regmap, ADI_AXI_REG_VERSION, &ver);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (ADI_AXI_PCORE_VER_MAJOR(ver) !=
|
|
ADI_AXI_PCORE_VER_MAJOR(st->info->version)) {
|
|
dev_err(&pdev->dev,
|
|
"Major version mismatch. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
|
|
ADI_AXI_PCORE_VER_MAJOR(st->info->version),
|
|
ADI_AXI_PCORE_VER_MINOR(st->info->version),
|
|
ADI_AXI_PCORE_VER_PATCH(st->info->version),
|
|
ADI_AXI_PCORE_VER_MAJOR(ver),
|
|
ADI_AXI_PCORE_VER_MINOR(ver),
|
|
ADI_AXI_PCORE_VER_PATCH(ver));
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Let's get the core read only configuration */
|
|
ret = regmap_read(st->regmap, AXI_DAC_CONFIG_REG, &st->reg_config);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* In some designs, setting the R1_MODE bit to 0 (which is the default
|
|
* value) causes all channels of the frontend to be routed to the same
|
|
* DMA (so they are sampled together). This is for things like
|
|
* Multiple-Input and Multiple-Output (MIMO). As most of the times we
|
|
* want independent channels let's override the core's default value and
|
|
* set the R1_MODE bit.
|
|
*/
|
|
ret = regmap_set_bits(st->regmap, AXI_DAC_CNTRL_2_REG,
|
|
ADI_DAC_CNTRL_2_R1_MODE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_init(&st->lock);
|
|
|
|
ret = devm_iio_backend_register(&pdev->dev, st->info->backend_info, st);
|
|
if (ret)
|
|
return dev_err_probe(&pdev->dev, ret,
|
|
"failed to register iio backend\n");
|
|
|
|
device_for_each_child_node_scoped(&pdev->dev, child) {
|
|
int val;
|
|
|
|
if (!st->info->has_child_nodes)
|
|
return dev_err_probe(&pdev->dev, -EINVAL,
|
|
"invalid fdt axi-dac compatible.");
|
|
|
|
/* Processing only reg 0 node */
|
|
ret = fwnode_property_read_u32(child, "reg", &val);
|
|
if (ret)
|
|
return dev_err_probe(&pdev->dev, ret,
|
|
"invalid reg property.");
|
|
if (val != 0)
|
|
return dev_err_probe(&pdev->dev, -EINVAL,
|
|
"invalid node address.");
|
|
|
|
ret = axi_dac_create_platform_device(st, child);
|
|
if (ret)
|
|
return dev_err_probe(&pdev->dev, -EINVAL,
|
|
"cannot create device.");
|
|
}
|
|
|
|
dev_info(&pdev->dev, "AXI DAC IP core (%d.%.2d.%c) probed\n",
|
|
ADI_AXI_PCORE_VER_MAJOR(ver),
|
|
ADI_AXI_PCORE_VER_MINOR(ver),
|
|
ADI_AXI_PCORE_VER_PATCH(ver));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct axi_dac_info dac_generic = {
|
|
.version = ADI_AXI_PCORE_VER(9, 1, 'b'),
|
|
.backend_info = &axi_dac_generic,
|
|
};
|
|
|
|
static const struct axi_dac_info dac_ad3552r = {
|
|
.version = ADI_AXI_PCORE_VER(9, 1, 'b'),
|
|
.backend_info = &axi_ad3552r,
|
|
.has_dac_clk = true,
|
|
.has_child_nodes = true,
|
|
};
|
|
|
|
static const struct of_device_id axi_dac_of_match[] = {
|
|
{ .compatible = "adi,axi-dac-9.1.b", .data = &dac_generic },
|
|
{ .compatible = "adi,axi-ad3552r", .data = &dac_ad3552r },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, axi_dac_of_match);
|
|
|
|
static struct platform_driver axi_dac_driver = {
|
|
.driver = {
|
|
.name = "adi-axi-dac",
|
|
.of_match_table = axi_dac_of_match,
|
|
},
|
|
.probe = axi_dac_probe,
|
|
};
|
|
module_platform_driver(axi_dac_driver);
|
|
|
|
MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
|
|
MODULE_DESCRIPTION("Analog Devices Generic AXI DAC IP core driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_IMPORT_NS("IIO_DMAENGINE_BUFFER");
|
|
MODULE_IMPORT_NS("IIO_BACKEND");
|