linux-loongson/drivers/gpio/gpio-xtensa.c
Bartosz Golaszewski d9d87d90cc treewide: rename GPIO set callbacks back to their original names
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-08-07 10:07:06 +02:00

170 lines
4.5 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2013 TangoTec Ltd.
* Author: Baruch Siach <baruch@tkos.co.il>
*
* Driver for the Xtensa LX4 GPIO32 Option
*
* Documentation: Xtensa LX4 Microprocessor Data Book, Section 2.22
*
* GPIO32 is a standard optional extension to the Xtensa architecture core that
* provides preconfigured output and input ports for intra SoC signaling. The
* GPIO32 option is implemented as 32bit Tensilica Instruction Extension (TIE)
* output state called EXPSTATE, and 32bit input wire called IMPWIRE. This
* driver treats input and output states as two distinct devices.
*
* Access to GPIO32 specific instructions is controlled by the CPENABLE
* (Coprocessor Enable Bits) register. By default Xtensa Linux startup code
* disables access to all coprocessors. This driver sets the CPENABLE bit
* corresponding to GPIO32 before any GPIO32 specific instruction, and restores
* CPENABLE state after that.
*
* This driver is currently incompatible with SMP. The GPIO32 extension is not
* guaranteed to be available in all cores. Moreover, each core controls a
* different set of IO wires. A theoretical SMP aware version of this driver
* would need to have a per core workqueue to do the actual GPIO manipulation.
*/
#include <linux/err.h>
#include <linux/module.h>
#include <linux/gpio/driver.h>
#include <linux/bitops.h>
#include <linux/platform_device.h>
#include <asm/coprocessor.h> /* CPENABLE read/write macros */
#ifndef XCHAL_CP_ID_XTIOP
#error GPIO32 option is not enabled for your xtensa core variant
#endif
#if XCHAL_HAVE_CP
static inline unsigned long enable_cp(unsigned long *cpenable)
{
unsigned long flags;
local_irq_save(flags);
*cpenable = xtensa_get_sr(cpenable);
xtensa_set_sr(*cpenable | BIT(XCHAL_CP_ID_XTIOP), cpenable);
return flags;
}
static inline void disable_cp(unsigned long flags, unsigned long cpenable)
{
xtensa_set_sr(cpenable, cpenable);
local_irq_restore(flags);
}
#else
static inline unsigned long enable_cp(unsigned long *cpenable)
{
*cpenable = 0; /* avoid uninitialized value warning */
return 0;
}
static inline void disable_cp(unsigned long flags, unsigned long cpenable)
{
}
#endif /* XCHAL_HAVE_CP */
static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset)
{
return GPIO_LINE_DIRECTION_IN; /* input only */
}
static int xtensa_impwire_get_value(struct gpio_chip *gc, unsigned offset)
{
unsigned long flags, saved_cpenable;
u32 impwire;
flags = enable_cp(&saved_cpenable);
__asm__ __volatile__("read_impwire %0" : "=a" (impwire));
disable_cp(flags, saved_cpenable);
return !!(impwire & BIT(offset));
}
static int xtensa_expstate_get_direction(struct gpio_chip *gc, unsigned offset)
{
return GPIO_LINE_DIRECTION_OUT; /* output only */
}
static int xtensa_expstate_get_value(struct gpio_chip *gc, unsigned offset)
{
unsigned long flags, saved_cpenable;
u32 expstate;
flags = enable_cp(&saved_cpenable);
__asm__ __volatile__("rur.expstate %0" : "=a" (expstate));
disable_cp(flags, saved_cpenable);
return !!(expstate & BIT(offset));
}
static int xtensa_expstate_set_value(struct gpio_chip *gc, unsigned int offset,
int value)
{
unsigned long flags, saved_cpenable;
u32 mask = BIT(offset);
u32 val = value ? BIT(offset) : 0;
flags = enable_cp(&saved_cpenable);
__asm__ __volatile__("wrmsk_expstate %0, %1"
:: "a" (val), "a" (mask));
disable_cp(flags, saved_cpenable);
return 0;
}
static struct gpio_chip impwire_chip = {
.label = "impwire",
.base = -1,
.ngpio = 32,
.get_direction = xtensa_impwire_get_direction,
.get = xtensa_impwire_get_value,
};
static struct gpio_chip expstate_chip = {
.label = "expstate",
.base = -1,
.ngpio = 32,
.get_direction = xtensa_expstate_get_direction,
.get = xtensa_expstate_get_value,
.set = xtensa_expstate_set_value,
};
static int xtensa_gpio_probe(struct platform_device *pdev)
{
int ret;
ret = gpiochip_add_data(&impwire_chip, NULL);
if (ret)
return ret;
return gpiochip_add_data(&expstate_chip, NULL);
}
static struct platform_driver xtensa_gpio_driver = {
.driver = {
.name = "xtensa-gpio",
},
.probe = xtensa_gpio_probe,
};
static int __init xtensa_gpio_init(void)
{
struct platform_device *pdev;
pdev = platform_device_register_simple("xtensa-gpio", 0, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
return platform_driver_register(&xtensa_gpio_driver);
}
device_initcall(xtensa_gpio_init);
MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
MODULE_DESCRIPTION("Xtensa LX4 GPIO32 driver");
MODULE_LICENSE("GPL");