linux-loongson/arch/arm64/boot/dts/xilinx/versal-net-vn-x-b2197-01-revA.dts
Michal Simek 99adc5299f arm64: versal-net: Add description for b2197-00 revA board
Add description for VN-X board. The board is using Versal NET SoC which has
16 a78 cores with additional IPs.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/1b23d64107220f5b48fc77ba28c5e59a20d83600.1738657826.git.michal.simek@amd.com
2025-02-17 15:22:53 +01:00

117 lines
2.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0
/*
* dts file for Xilinx Versal Net VNX board revA
*
* (C) Copyright 2022, Xilinx, Inc.
* (C) Copyright 2022 - 2025, Advanced Micro Devices, Inc.
*
* Michal Simek <michal.simek@amd.com>
*/
/dts-v1/;
#include "versal-net.dtsi"
#include "versal-net-clk.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "xlnx,versal-net-vnx-revA", "xlnx,versal-net-vnx", "xlnx,versal-net";
model = "Xilinx Versal NET VNX revA";
dma-coherent;
memory: memory@0 {
reg = <0 0 0 0x80000000>;
device_type = "memory";
};
memory_hi: memory@800000000 {
reg = <8 0 3 0x80000000>;
device_type = "memory";
};
memory_hi2: memory@50000000000 {
reg = <0x500 0 4 0>;
device_type = "memory";
};
chosen {
bootargs = "console=ttyAMA1,115200n8";
stdout-path = "serial1:115200n8";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
rsc_tbl_carveout: rproc@bbf14000 {
reg = <0 0xbbf14000 0 0x1000>;
no-map;
};
rpu0vdev0vring0: rpu0vdev0vring0@bbf15000 {
reg = <0 0xbbf15000 0 0x1000>;
no-map;
};
rpu0vdev0vring1: rpu0vdev0vring1@bbf16000 {
reg = <0 0xbbf16000 0 0x1000>;
no-map;
};
rpu0vdev0buffer: rpu0vdev0buffer@bbf17000 {
reg = <0 0xbbf17000 0 0xD000>;
no-map;
};
reserve_others: reserveothers@0 {
reg = <0 0x0 0 0x1c200000>;
no-map;
};
pdi_update: pdiupdate@1c200000 {
reg = <0 0x1c200000 0 0x6000000>;
no-map;
};
reserve_optee_atf: reserveopteeatf@22200000 {
reg = <0 0x22200000 0 0x4100000>;
no-map;
};
};
};
&gem1 {
status = "okay";
iommus = <&smmu 0x235>;
phy-handle = <&phy>;
phy-mode = "rmii";
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy: ethernet-phy@4 {
reg = <4>;
};
};
};
&ospi {
num-cs = <2>;
iommus = <&smmu 0x245>;
#address-cells = <1>;
#size-cells = <0>;
};
&sdhci1 {
status = "okay";
iommus = <&smmu 0x243>;
non-removable;
disable-wp;
no-sd;
no-sdio;
cap-mmc-hw-reset;
bus-width = <8>;
no-1-8-v;
};
&serial1 {
status = "okay";
};
&smmu {
status = "okay";
};