mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-01 06:39:05 +00:00
e6066edc94
Much like the Sige5, the ROCK 4D also has an HDMI port, so is capable of providing HDMI audio output as well. Enable the SoC's hdmi_sound card, and also enable the SoC audio controller (sai6) that feeds into it. Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Tested-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20250630-rock4d-audio-v1-4-0b3c8e8fda9c@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
848 lines
18 KiB
Plaintext
848 lines
18 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include <dt-bindings/soc/rockchip,vop2.h>
|
|
#include <dt-bindings/usb/pd.h>
|
|
#include "rk3576.dtsi"
|
|
|
|
/ {
|
|
model = "Radxa ROCK 4D";
|
|
compatible = "radxa,rock-4d", "rockchip,rk3576";
|
|
|
|
aliases {
|
|
ethernet0 = &gmac0;
|
|
mmc0 = &sdmmc;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:1500000n8";
|
|
};
|
|
|
|
hdmi-con {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con_in: endpoint {
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
rfkill {
|
|
compatible = "rfkill-gpio";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_en_h>;
|
|
radio-type = "wlan";
|
|
shutdown-gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
leds: leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&led_rgb_g &led_rgb_r>;
|
|
|
|
power-led {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_STATUS;
|
|
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
|
|
user-led {
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_HEARTBEAT;
|
|
gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
vcc_5v0_dcin: regulator-vcc-5v0-dcin {
|
|
compatible = "regulator-fixed";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-name = "vcc_5v0_dcin";
|
|
};
|
|
|
|
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-name = "vcc_1v1_nldo_s3";
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
vcc_1v2_ufs_vccq_s0: regulator-vcc-1v2-ufs-vccq-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc_1v2_ufs_vccq_s0";
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
vcc_1v8_s0: regulator-vcc-1v8-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8_s0";
|
|
vin-supply = <&vcc_1v8_s3>;
|
|
};
|
|
|
|
vcc_1v8_ufs_vccq2_s0: regulator-vcc-1v8-ufs-vccq2-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8_ufs_vccq2_s0";
|
|
vin-supply = <&vcc_1v8_s3>;
|
|
};
|
|
|
|
vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-name = "vcc_2v0_pldo_s3";
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
vcc_3v3_pcie: regulator-vcc-3v3-pcie {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_pwren>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_3v3_pcie";
|
|
startup-delay-us = <5000>;
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
vcc_3v3_rtc_s5: regulator-vcc-3v3-rtc-s5 {
|
|
compatible = "regulator-fixed";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_3v3_rtc_s5";
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
vcc_3v3_s0: regulator-vcc-3v3-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_3v3_s0";
|
|
vin-supply = <&vcc_3v3_s3>;
|
|
};
|
|
|
|
vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_3v3_ufs_s0";
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
vcc_3v3_wifi: regulator-vcc-3v3-wifi {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_wifi_pwr>;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_3v3_wifi";
|
|
vin-supply = <&vcc_3v3_s3>;
|
|
};
|
|
|
|
vcc_5v0_device: regulator-vcc-5v0-device {
|
|
compatible = "regulator-fixed";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-name = "vcc_5v0_device";
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
vcc_5v0_host: regulator-vcc-5v0-host {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_host_pwren>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-name = "vcc5v0_host";
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
vcc_5v0_otg: regulator-vcc-5v0-otg {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_otg_pwren>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-name = "vcc5v0_otg";
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
vcc_5v0_sys: regulator-vcc-5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-name = "vcc_5v0_sys";
|
|
vin-supply = <&vcc_5v0_dcin>;
|
|
};
|
|
};
|
|
|
|
&combphy0_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy1_psu {
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu_b0 {
|
|
cpu-supply = <&vdd_cpu_big_s0>;
|
|
};
|
|
|
|
&cpu_b1 {
|
|
cpu-supply = <&vdd_cpu_big_s0>;
|
|
};
|
|
|
|
&cpu_b2 {
|
|
cpu-supply = <&vdd_cpu_big_s0>;
|
|
};
|
|
|
|
&cpu_b3 {
|
|
cpu-supply = <&vdd_cpu_big_s0>;
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l1 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l2 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l3 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&gmac0 {
|
|
clock_in_out = "output";
|
|
phy-handle = <&rgmii_phy0>;
|
|
phy-mode = "rgmii-id";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <ð0m0_miim
|
|
ð0m0_tx_bus2
|
|
ð0m0_rx_bus2
|
|
ð0m0_rgmii_clk
|
|
ð0m0_rgmii_bus
|
|
ðm0_clk0_25m_out>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_in {
|
|
hdmi_in_vp0: endpoint {
|
|
remote-endpoint = <&vp0_out_hdmi>;
|
|
};
|
|
};
|
|
|
|
&hdmi_out {
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
|
|
&hdmi_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdptxphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
pmic@23 {
|
|
compatible = "rockchip,rk806";
|
|
reg = <0x23>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_pins
|
|
&rk806_dvs1_null
|
|
&rk806_dvs2_null
|
|
&rk806_dvs3_null>;
|
|
system-power-controller;
|
|
vcc1-supply = <&vcc_5v0_sys>;
|
|
vcc2-supply = <&vcc_5v0_sys>;
|
|
vcc3-supply = <&vcc_5v0_sys>;
|
|
vcc4-supply = <&vcc_5v0_sys>;
|
|
vcc5-supply = <&vcc_5v0_sys>;
|
|
vcc6-supply = <&vcc_5v0_sys>;
|
|
vcc7-supply = <&vcc_5v0_sys>;
|
|
vcc8-supply = <&vcc_5v0_sys>;
|
|
vcc9-supply = <&vcc_5v0_sys>;
|
|
vcc10-supply = <&vcc_5v0_sys>;
|
|
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
|
vcc12-supply = <&vcc_5v0_sys>;
|
|
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
|
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
|
vcca-supply = <&vcc_5v0_sys>;
|
|
|
|
rk806_dvs1_null: dvs1-null-pins {
|
|
pins = "gpio_pwrctrl1";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
|
|
pins = "gpio_pwrctrl1";
|
|
function = "pin_fun2";
|
|
};
|
|
|
|
rk806_dvs1_rst: dvs1-rst-pins {
|
|
pins = "gpio_pwrctrl1";
|
|
function = "pin_fun3";
|
|
};
|
|
|
|
rk806_dvs1_slp: dvs1-slp-pins {
|
|
pins = "gpio_pwrctrl1";
|
|
function = "pin_fun1";
|
|
};
|
|
|
|
rk806_dvs2_dvs: dvs2-dvs-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun4";
|
|
};
|
|
|
|
rk806_dvs2_gpio: dvs2-gpio-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun5";
|
|
};
|
|
|
|
rk806_dvs2_null: dvs2-null-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun2";
|
|
};
|
|
|
|
rk806_dvs2_rst: dvs2-rst-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun3";
|
|
};
|
|
|
|
rk806_dvs2_slp: dvs2-slp-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun1";
|
|
};
|
|
|
|
rk806_dvs3_dvs: dvs3-dvs-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun4";
|
|
};
|
|
|
|
rk806_dvs3_gpio: dvs3-gpio-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun5";
|
|
};
|
|
|
|
rk806_dvs3_null: dvs3-null-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun2";
|
|
};
|
|
|
|
rk806_dvs3_rst: dvs3-rst-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun3";
|
|
};
|
|
|
|
rk806_dvs3_slp: dvs3-slp-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun1";
|
|
};
|
|
|
|
regulators {
|
|
vdd_cpu_big_s0: dcdc-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-enable-ramp-delay = <400>;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-name = "vdd_cpu_big_s0";
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_npu_s0: dcdc-reg2 {
|
|
regulator-boot-on;
|
|
regulator-enable-ramp-delay = <400>;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-name = "vdd_npu_s0";
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_lit_s0: dcdc-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-name = "vdd_cpu_lit_s0";
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
vcc_3v3_s3: dcdc-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_3v3_s3";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vdd_gpu_s0: dcdc-reg5 {
|
|
regulator-boot-on;
|
|
regulator-enable-ramp-delay = <400>;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-name = "vdd_gpu_s0";
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <850000>;
|
|
};
|
|
};
|
|
|
|
vddq_ddr_s0: dcdc-reg6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vddq_ddr_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_logic_s0: dcdc-reg7 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <800000>;
|
|
regulator-name = "vdd_logic_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8_s3: dcdc-reg8 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8_s3";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdd2_ddr_s3: dcdc-reg9 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vdd2_ddr_s3";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_ddr_s0: dcdc-reg10 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vdd_ddr_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca_1v8_s0: pldo-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcca_1v8_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca1v8_pldo2_s0: pldo-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcca1v8_pldo2_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda_1v2_s0: pldo-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vdda_1v2_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca_3v3_s0: pldo-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcca_3v3_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vccio_sd_s0: pldo-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vccio_sd_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca1v8_pldo6_s3: pldo-reg6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcca1v8_pldo6_s3";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdd_0v75_s3: nldo-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "vdd_0v75_s3";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
vdda_ddr_pll_s0: nldo-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-name = "vdda_ddr_pll_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda0v75_hdmi_s0: nldo-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <837500>;
|
|
regulator-max-microvolt = <837500>;
|
|
regulator-name = "vdda0v75_hdmi_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda_0v85_s0: nldo-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-name = "vdda_0v85_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda_0v75_s0: nldo-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "vdda_0v75_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
hym8563: rtc@51 {
|
|
compatible = "haoyu,hym8563";
|
|
reg = <0x51>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "hym8563";
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hym8563_int>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&mdio0 {
|
|
rgmii_phy0: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-id001c.c916";
|
|
reg = <0x1>;
|
|
clocks = <&cru REFCLKO25M_GMAC0_OUT>;
|
|
assigned-clocks = <&cru REFCLKO25M_GMAC0_OUT>;
|
|
assigned-clock-rates = <25000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rtl8211f_rst>;
|
|
reset-assert-us = <20000>;
|
|
reset-deassert-us = <100000>;
|
|
reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&pcie0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_reset>;
|
|
reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc_3v3_pcie>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
hym8563 {
|
|
hym8563_int: hym8563-int {
|
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
led_rgb_g: led-green-en {
|
|
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
led_rgb_r: led-red-en {
|
|
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
rtl8211f {
|
|
rtl8211f_rst: rtl8211f-rst {
|
|
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pcie {
|
|
pcie_pwren: pcie-pwren {
|
|
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
pcie_reset: pcie-reset {
|
|
rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
usb_host_pwren: usb-host-pwren {
|
|
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
usb_otg_pwren: usb-otg-pwren {
|
|
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
|
|
};
|
|
};
|
|
|
|
wifi {
|
|
usb_wifi_pwr: usb-wifi-pwr {
|
|
rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
wifi_en_h: wifi-en-h {
|
|
rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sai6 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
max-frequency = <200000000>;
|
|
no-sdio;
|
|
no-mmc;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc_3v3_s3>;
|
|
vqmmc-supply = <&vccio_sd_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
|
|
&sfc0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&fspi0_pins &fspi0_csn0>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <50000000>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-tx-bus-width = <1>;
|
|
vcc-supply = <&vcc_1v8_s3>;
|
|
};
|
|
};
|
|
|
|
&u2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0_otg {
|
|
phy-supply = <&vcc_5v0_otg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1_otg {
|
|
phy-supply = <&vcc_5v0_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-0 = <&uart0m0_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
&ufshc {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_drd0_dwc3 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_drd1_dwc3 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&vop {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vp0 {
|
|
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
remote-endpoint = <&hdmi_in_vp0>;
|
|
};
|
|
};
|