mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-31 22:23:05 +00:00
115e74a29b
There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now.
- exynos2200 is a recent high-end mobile phone chip used in a
few Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it.
There are five more chips in a separate branch, as those are new
chip families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly
added machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and
Sophgo sg2042.
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95.
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm.
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5.
-----BEGIN PGP SIGNATURE-----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=0VBL
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now
- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it
There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly added
machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"
* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
1045 lines
22 KiB
Plaintext
1045 lines
22 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2024 Rockchip Electronics Co., Ltd.
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include <dt-bindings/soc/rockchip,vop2.h>
|
|
#include <dt-bindings/usb/pd.h>
|
|
#include "rk3576.dtsi"
|
|
|
|
/ {
|
|
model = "ArmSoM Sige5";
|
|
compatible = "armsom,sige5", "rockchip,rk3576";
|
|
|
|
aliases {
|
|
ethernet0 = &gmac0;
|
|
ethernet1 = &gmac1;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:1500000n8";
|
|
};
|
|
|
|
hdmi-con {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con_in: endpoint {
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
leds: leds {
|
|
compatible = "gpio-leds";
|
|
|
|
green_led: green-led {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_HEARTBEAT;
|
|
gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
|
|
red_led: red-led {
|
|
color = <LED_COLOR_ID_RED>;
|
|
function = LED_FUNCTION_STATUS;
|
|
gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
};
|
|
|
|
es8388_sound: es8388-sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,mclk-fs = <256>;
|
|
simple-audio-card,name = "On-board Analog ES8388";
|
|
simple-audio-card,widgets = "Microphone", "Headphone Mic",
|
|
"Microphone", "Mic Pads",
|
|
"Headphone", "Headphone",
|
|
"Line Out", "Line Out";
|
|
simple-audio-card,routing = "Headphone", "LOUT1",
|
|
"Headphone", "ROUT1",
|
|
"Line Out", "LOUT2",
|
|
"Line Out", "ROUT2",
|
|
"RINPUT1", "Headphone Mic",
|
|
"LINPUT2", "Mic Pads",
|
|
"RINPUT2", "Mic Pads";
|
|
simple-audio-card,pin-switches = "Headphone", "Line Out";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&sai1>;
|
|
};
|
|
|
|
simple-audio-card,codec {
|
|
sound-dai = <&es8388>;
|
|
system-clock-frequency = <12288000>;
|
|
};
|
|
};
|
|
|
|
vcc_12v0_dcin: regulator-vcc-12v0-dcin {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_12v0_dcin";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
};
|
|
|
|
vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v1_nldo_s3";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
vcc_1v2_ufs_vccq_s0: regulator-vcc-1v2-ufs-vccq-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v2_ufs_vccq_s0";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
vcc_1v8_s0: regulator-vcc-1v8-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v8_s0";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_1v8_s3>;
|
|
};
|
|
|
|
vcc_1v8_ufs_vccq2_s0: regulator-vcc-1v8-ufs-vccq2-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v8_ufs_vccq2_s0";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
vin-supply = <&vcc_1v8_s3>;
|
|
};
|
|
|
|
vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_2v0_pldo_s3";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
vcc_3v3_pcie: regulator-vcc-3v3-pcie {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_pwr_en>;
|
|
regulator-name = "vcc_3v3_pcie";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
enable-active-high;
|
|
gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
|
|
startup-delay-us = <5000>;
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
vcc_3v3_rtc_s5: regulator-vcc-3v3-rtc-s5 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_3v3_rtc_s5";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
vcc_3v3_s0: regulator-vcc-3v3-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_3v3_s0";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_3v3_s3>;
|
|
};
|
|
|
|
vcc_5v0_sys: regulator-vcc-5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc_12v0_dcin>;
|
|
};
|
|
|
|
vcc_5v0_device: regulator-vcc-5v0-device {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_5v0_device";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc_12v0_dcin>;
|
|
};
|
|
|
|
vcc_5v0_typec0: regulator-vcc-5v0-typec0 {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_otg0_pwren>;
|
|
regulator-name = "vcc_5v0_typec0";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc_5v0_device>;
|
|
};
|
|
|
|
vcc_5v0_usbhost: regulator-vcc-5v0-usbhost {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usb_host_pwren>;
|
|
regulator-name = "vcc_5v0_usbhost";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc_5v0_device>;
|
|
};
|
|
|
|
vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_3v3_ufs_s0";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_5v0_sys>;
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&hym8563>;
|
|
clock-names = "ext_clock";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_reg_on>;
|
|
reset-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&combphy1_psu {
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy0_ps {
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu_b0 {
|
|
cpu-supply = <&vdd_cpu_big_s0>;
|
|
};
|
|
|
|
&cpu_b1 {
|
|
cpu-supply = <&vdd_cpu_big_s0>;
|
|
};
|
|
|
|
&cpu_b2 {
|
|
cpu-supply = <&vdd_cpu_big_s0>;
|
|
};
|
|
|
|
&cpu_b3 {
|
|
cpu-supply = <&vdd_cpu_big_s0>;
|
|
};
|
|
|
|
&cpu_l0 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l1 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l2 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&cpu_l3 {
|
|
cpu-supply = <&vdd_cpu_lit_s0>;
|
|
};
|
|
|
|
&gmac0 {
|
|
phy-mode = "rgmii-id";
|
|
clock_in_out = "output";
|
|
phy-handle = <&rgmii_phy0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <ð0m0_miim
|
|
ð0m0_tx_bus2
|
|
ð0m0_rx_bus2
|
|
ð0m0_rgmii_clk
|
|
ð0m0_rgmii_bus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac1 {
|
|
phy-mode = "rgmii-id";
|
|
clock_in_out = "output";
|
|
phy-handle = <&rgmii_phy1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <ð1m0_miim
|
|
ð1m0_tx_bus2
|
|
ð1m0_rx_bus2
|
|
ð1m0_rgmii_clk
|
|
ð1m0_rgmii_bus
|
|
ðm0_clk1_25m_out>;
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_in {
|
|
hdmi_in_vp0: endpoint {
|
|
remote-endpoint = <&vp0_out_hdmi>;
|
|
};
|
|
};
|
|
|
|
&hdmi_out {
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
|
|
&hdmi_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&hdptxphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
pmic@23 {
|
|
compatible = "rockchip,rk806";
|
|
reg = <0x23>;
|
|
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
|
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
|
|
|
system-power-controller;
|
|
|
|
vcc1-supply = <&vcc_5v0_sys>;
|
|
vcc2-supply = <&vcc_5v0_sys>;
|
|
vcc3-supply = <&vcc_5v0_sys>;
|
|
vcc4-supply = <&vcc_5v0_sys>;
|
|
vcc5-supply = <&vcc_5v0_sys>;
|
|
vcc6-supply = <&vcc_5v0_sys>;
|
|
vcc7-supply = <&vcc_5v0_sys>;
|
|
vcc8-supply = <&vcc_5v0_sys>;
|
|
vcc9-supply = <&vcc_5v0_sys>;
|
|
vcc10-supply = <&vcc_5v0_sys>;
|
|
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
|
vcc12-supply = <&vcc_5v0_sys>;
|
|
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
|
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
|
vcca-supply = <&vcc_5v0_sys>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
rk806_dvs1_null: dvs1-null-pins {
|
|
pins = "gpio_pwrctrl1";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs2_null: dvs2-null-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs3_null: dvs3-null-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun0";
|
|
};
|
|
|
|
rk806_dvs1_slp: dvs1-slp-pins {
|
|
pins = "gpio_pwrctrl1";
|
|
function = "pin_fun1";
|
|
};
|
|
|
|
rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
|
|
pins = "gpio_pwrctrl1";
|
|
function = "pin_fun2";
|
|
};
|
|
|
|
rk806_dvs1_rst: dvs1-rst-pins {
|
|
pins = "gpio_pwrctrl1";
|
|
function = "pin_fun3";
|
|
};
|
|
|
|
rk806_dvs2_slp: dvs2-slp-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun1";
|
|
};
|
|
|
|
rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun2";
|
|
};
|
|
|
|
rk806_dvs2_rst: dvs2-rst-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun3";
|
|
};
|
|
|
|
rk806_dvs2_dvs: dvs2-dvs-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun4";
|
|
};
|
|
|
|
rk806_dvs2_gpio: dvs2-gpio-pins {
|
|
pins = "gpio_pwrctrl2";
|
|
function = "pin_fun5";
|
|
};
|
|
|
|
rk806_dvs3_slp: dvs3-slp-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun1";
|
|
};
|
|
|
|
rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun2";
|
|
};
|
|
|
|
rk806_dvs3_rst: dvs3-rst-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun3";
|
|
};
|
|
|
|
rk806_dvs3_dvs: dvs3-dvs-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun4";
|
|
};
|
|
|
|
rk806_dvs3_gpio: dvs3-gpio-pins {
|
|
pins = "gpio_pwrctrl3";
|
|
function = "pin_fun5";
|
|
};
|
|
|
|
regulators {
|
|
vdd_cpu_big_s0: dcdc-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_cpu_big_s0";
|
|
regulator-enable-ramp-delay = <400>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_npu_s0: dcdc-reg2 {
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_npu_s0";
|
|
regulator-enable-ramp-delay = <400>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_cpu_lit_s0: dcdc-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_cpu_lit_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
vcc_3v3_s3: dcdc-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_3v3_s3";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vdd_gpu_s0: dcdc-reg5 {
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-name = "vdd_gpu_s0";
|
|
regulator-enable-ramp-delay = <400>;
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <850000>;
|
|
};
|
|
};
|
|
|
|
vddq_ddr_s0: dcdc-reg6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vddq_ddr_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_logic_s0: dcdc-reg7 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <800000>;
|
|
regulator-name = "vdd_logic_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8_s3: dcdc-reg8 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcc_1v8_s3";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdd2_ddr_s3: dcdc-reg9 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-name = "vdd2_ddr_s3";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_ddr_s0: dcdc-reg10 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vdd_ddr_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca_1v8_s0: pldo-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcca_1v8_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca1v8_pldo2_s0: pldo-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcca1v8_pldo2_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda_1v2_s0: pldo-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vdda_1v2_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca_3v3_s0: pldo-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcca_3v3_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vccio_sd_s0: pldo-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vccio_sd_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca1v8_pldo6_s3: pldo-reg6 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcca1v8_pldo6_s3";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vdd_0v75_s3: nldo-reg1 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "vdd_0v75_s3";
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <750000>;
|
|
};
|
|
};
|
|
|
|
vdda_ddr_pll_s0: nldo-reg2 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-name = "vdda_ddr_pll_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda0v75_hdmi_s0: nldo-reg3 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <837500>;
|
|
regulator-max-microvolt = <837500>;
|
|
regulator-name = "vdda0v75_hdmi_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda_0v85_s0: nldo-reg4 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <850000>;
|
|
regulator-name = "vdda_0v85_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda_0v75_s0: nldo-reg5 {
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-name = "vdda_0v75_s0";
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "okay";
|
|
|
|
usbc0: typec-portc@22 {
|
|
compatible = "fcs,fusb302";
|
|
reg = <0x22>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usbc0_interrupt>;
|
|
vbus-supply = <&vcc_5v0_typec0>;
|
|
|
|
connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
data-role = "dual";
|
|
/* fusb302 supports PD Rev 2.0 Ver 1.2 */
|
|
pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>;
|
|
power-role = "source";
|
|
source-pdos = <PDO_FIXED(5000, 2000,
|
|
PDO_FIXED_USB_COMM | PDO_FIXED_DATA_SWAP)>;
|
|
|
|
altmodes {
|
|
displayport {
|
|
svid = /bits/ 16 <0xff01>;
|
|
vdo = <0xffffffff>;
|
|
};
|
|
};
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
usbc0_hs_ep: endpoint {
|
|
remote-endpoint = <&usb_drd0_hs_ep>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
usbc0_ss_ep: endpoint {
|
|
remote-endpoint = <&usb_drd0_ss_ep>;
|
|
};
|
|
};
|
|
port@2 {
|
|
reg = <2>;
|
|
usbc0_dp_ep: endpoint {
|
|
remote-endpoint = <&usbdp_phy_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
hym8563: rtc@51 {
|
|
compatible = "haoyu,hym8563";
|
|
reg = <0x51>;
|
|
clock-output-names = "hym8563";
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hym8563_int>;
|
|
wakeup-source;
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "okay";
|
|
|
|
es8388: audio-codec@10 {
|
|
compatible = "everest,es8388", "everest,es8328";
|
|
reg = <0x10>;
|
|
clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
|
|
AVDD-supply = <&vcca_3v3_s0>;
|
|
DVDD-supply = <&vcc_3v3_s0>;
|
|
HPVDD-supply = <&vcca_3v3_s0>;
|
|
PVDD-supply = <&vcc_3v3_s0>;
|
|
assigned-clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
|
|
assigned-clock-rates = <12288000>;
|
|
#sound-dai-cells = <0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sai1m0_mclk>;
|
|
};
|
|
};
|
|
|
|
&mdio0 {
|
|
rgmii_phy0: phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
clocks = <&cru REFCLKO25M_GMAC0_OUT>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac0_rst>;
|
|
reset-assert-us = <20000>;
|
|
reset-deassert-us = <100000>;
|
|
reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&mdio1 {
|
|
rgmii_phy1: phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
clocks = <&cru REFCLKO25M_GMAC1_OUT>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac1_rst>;
|
|
reset-assert-us = <20000>;
|
|
reset-deassert-us = <100000>;
|
|
reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&pcie0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_reset>;
|
|
reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc_3v3_pcie>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
gmac {
|
|
gmac0_rst: gmac0-rst {
|
|
rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
gmac1_rst: gmac1-rst {
|
|
rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
headphone {
|
|
hp_det: hp-det {
|
|
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
hym8563 {
|
|
hym8563_int: hym8563-int {
|
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
led_rgb_r: led-red-en {
|
|
rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
led_rgb_g: led-green-en {
|
|
rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pcie {
|
|
pcie_pwr_en: pcie-pwr-en {
|
|
rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
pcie_reset: pcie-reset {
|
|
rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
usb_host_pwren: usb-host-pwren {
|
|
rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
usb_otg0_pwren: usb-otg0-pwren {
|
|
rockchip,pins = <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
usbc0_interrupt: usbc0-interrupt {
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
usbc0_sbu1: usbc0-sbu1 {
|
|
rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
usbc0_sbu2: usbc0-sbu2 {
|
|
rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
wireless-bluetooth {
|
|
bt_reg_on: bt-reg-on {
|
|
rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
host_wake_bt: host-wake-bt {
|
|
rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
bt_wake_host: bt-wake-host {
|
|
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
};
|
|
|
|
wireless-wlan {
|
|
wifi_wake_host: wifi-wake-host {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
wifi_reg_on: wifi-reg-on {
|
|
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sai1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sai1m0_lrck
|
|
&sai1m0_sclk
|
|
&sai1m0_sdi0
|
|
&sai1m0_sdo0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sai6 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
full-pwr-cycle-in-suspend;
|
|
max-frequency = <200000000>;
|
|
mmc-hs400-1_8v;
|
|
mmc-hs400-enhanced-strobe;
|
|
no-sdio;
|
|
no-sd;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdio {
|
|
bus-width = <4>;
|
|
cap-sdio-irq;
|
|
disable-wp;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
no-sd;
|
|
no-mmc;
|
|
non-removable;
|
|
sd-uhs-sdr50;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc_3v3_s3>;
|
|
vqmmc-supply = <&vcc_1v8_s3>;
|
|
wakeup-source;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc {
|
|
bus-width = <4>;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
max-frequency = <200000000>;
|
|
no-sdio;
|
|
no-mmc;
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc_3v3_s3>;
|
|
vqmmc-supply = <&vccio_sd_s0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy0_otg {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u2phy1_otg {
|
|
phy-supply = <&vcc_5v0_usbhost>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-0 = <&uart0m0_xfer>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* Used by Bluetooth modules, enabled in a version specific overlay */
|
|
&uart4 {
|
|
pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn &uart4m1_rtsn>;
|
|
pinctrl-names = "default";
|
|
uart-has-rtscts;
|
|
};
|
|
|
|
&usb_drd0_dwc3 {
|
|
usb-role-switch;
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
usb_drd0_hs_ep: endpoint {
|
|
remote-endpoint = <&usbc0_hs_ep>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
usb_drd0_ss_ep: endpoint {
|
|
remote-endpoint = <&usbc0_ss_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb_drd1_dwc3 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdp_phy {
|
|
mode-switch;
|
|
orientation-switch;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usbc0_sbu1 &usbc0_sbu2>;
|
|
sbu1-dc-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
sbu2-dc-gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
|
|
port {
|
|
usbdp_phy_ep: endpoint {
|
|
remote-endpoint = <&usbc0_dp_ep>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&vop {
|
|
status = "okay";
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vp0 {
|
|
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
remote-endpoint = <&hdmi_in_vp0>;
|
|
};
|
|
};
|