mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-01 06:39:05 +00:00

Add XSPI node to RZ/V2N ("R9A09G056") SoC DTSI. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250704140823.163572-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
939 lines
26 KiB
Plaintext
939 lines
26 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
/*
|
|
* Device Tree Source for the RZ/V2N SoC
|
|
*
|
|
* Copyright (C) 2025 Renesas Electronics Corp.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/renesas,r9a09g056-cpg.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
|
|
|
|
/* RZV2N_Px = Offset address of PFC_P_mn - 0x20 */
|
|
#define RZV2N_P0 0
|
|
#define RZV2N_P1 1
|
|
#define RZV2N_P2 2
|
|
#define RZV2N_P3 3
|
|
#define RZV2N_P4 4
|
|
#define RZV2N_P5 5
|
|
#define RZV2N_P6 6
|
|
#define RZV2N_P7 7
|
|
#define RZV2N_P8 8
|
|
#define RZV2N_P9 9
|
|
#define RZV2N_PA 10
|
|
#define RZV2N_PB 11
|
|
|
|
#define RZV2N_PORT_PINMUX(b, p, f) RZG2L_PORT_PINMUX(RZV2N_P##b, p, f)
|
|
#define RZV2N_GPIO(port, pin) RZG2L_GPIO(RZV2N_P##port, pin)
|
|
|
|
/ {
|
|
compatible = "renesas,r9a09g056";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
audio_extal_clk: audio-clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
/* This value must be overridden by the board */
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
/*
|
|
* The default cluster table is based on the assumption that the PLLCA55 clock
|
|
* frequency is set to 1.7GHz. The PLLCA55 clock frequency can be set to
|
|
* 1.7/1.6/1.5/1.1 GHz based on the BOOTPLLCA_0/1 pins (and additionally can be
|
|
* clocked to 1.8GHz as well). The table below should be overridden in the board
|
|
* DTS based on the PLLCA55 clock frequency.
|
|
*/
|
|
cluster0_opp: opp-table-0 {
|
|
compatible = "operating-points-v2";
|
|
|
|
opp-1700000000 {
|
|
opp-hz = /bits/ 64 <1700000000>;
|
|
opp-microvolt = <900000>;
|
|
clock-latency-ns = <300000>;
|
|
};
|
|
opp-850000000 {
|
|
opp-hz = /bits/ 64 <850000000>;
|
|
opp-microvolt = <800000>;
|
|
clock-latency-ns = <300000>;
|
|
};
|
|
opp-425000000 {
|
|
opp-hz = /bits/ 64 <425000000>;
|
|
opp-microvolt = <800000>;
|
|
clock-latency-ns = <300000>;
|
|
};
|
|
opp-212500000 {
|
|
opp-hz = /bits/ 64 <212500000>;
|
|
opp-microvolt = <800000>;
|
|
clock-latency-ns = <300000>;
|
|
opp-suspend;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a55";
|
|
reg = <0>;
|
|
device_type = "cpu";
|
|
next-level-cache = <&L3_CA55>;
|
|
enable-method = "psci";
|
|
clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK0>;
|
|
operating-points-v2 = <&cluster0_opp>;
|
|
};
|
|
|
|
cpu1: cpu@100 {
|
|
compatible = "arm,cortex-a55";
|
|
reg = <0x100>;
|
|
device_type = "cpu";
|
|
next-level-cache = <&L3_CA55>;
|
|
enable-method = "psci";
|
|
clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK1>;
|
|
operating-points-v2 = <&cluster0_opp>;
|
|
};
|
|
|
|
cpu2: cpu@200 {
|
|
compatible = "arm,cortex-a55";
|
|
reg = <0x200>;
|
|
device_type = "cpu";
|
|
next-level-cache = <&L3_CA55>;
|
|
enable-method = "psci";
|
|
clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK2>;
|
|
operating-points-v2 = <&cluster0_opp>;
|
|
};
|
|
|
|
cpu3: cpu@300 {
|
|
compatible = "arm,cortex-a55";
|
|
reg = <0x300>;
|
|
device_type = "cpu";
|
|
next-level-cache = <&L3_CA55>;
|
|
enable-method = "psci";
|
|
clocks = <&cpg CPG_CORE R9A09G056_CA55_0_CORE_CLK3>;
|
|
operating-points-v2 = <&cluster0_opp>;
|
|
};
|
|
|
|
L3_CA55: cache-controller-0 {
|
|
compatible = "cache";
|
|
cache-unified;
|
|
cache-size = <0x100000>;
|
|
cache-level = <3>;
|
|
};
|
|
};
|
|
|
|
gpu_opp_table: opp-table-1 {
|
|
compatible = "operating-points-v2";
|
|
|
|
opp-630000000 {
|
|
opp-hz = /bits/ 64 <630000000>;
|
|
opp-microvolt = <800000>;
|
|
};
|
|
|
|
opp-315000000 {
|
|
opp-hz = /bits/ 64 <315000000>;
|
|
opp-microvolt = <800000>;
|
|
};
|
|
|
|
opp-157500000 {
|
|
opp-hz = /bits/ 64 <157500000>;
|
|
opp-microvolt = <800000>;
|
|
};
|
|
|
|
opp-78750000 {
|
|
opp-hz = /bits/ 64 <78750000>;
|
|
opp-microvolt = <800000>;
|
|
};
|
|
|
|
opp-19687500 {
|
|
opp-hz = /bits/ 64 <19687500>;
|
|
opp-microvolt = <800000>;
|
|
};
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0", "arm,psci-0.2";
|
|
method = "smc";
|
|
};
|
|
|
|
qextal_clk: qextal-clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
/* This value must be overridden by the board */
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
rtxin_clk: rtxin-clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
/* This value must be overridden by the board */
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
soc: soc {
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
pinctrl: pinctrl@10410000 {
|
|
compatible = "renesas,r9a09g056-pinctrl";
|
|
reg = <0 0x10410000 0 0x10000>;
|
|
clocks = <&cpg CPG_CORE R9A09G056_IOTOP_0_SHCLK>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&pinctrl 0 0 96>;
|
|
power-domains = <&cpg>;
|
|
resets = <&cpg 0xa5>, <&cpg 0xa6>;
|
|
};
|
|
|
|
cpg: clock-controller@10420000 {
|
|
compatible = "renesas,r9a09g056-cpg";
|
|
reg = <0 0x10420000 0 0x10000>;
|
|
clocks = <&audio_extal_clk>, <&rtxin_clk>, <&qextal_clk>;
|
|
clock-names = "audio_extal", "rtxin", "qextal";
|
|
#clock-cells = <2>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
sys: system-controller@10430000 {
|
|
compatible = "renesas,r9a09g056-sys";
|
|
reg = <0 0x10430000 0 0x10000>;
|
|
clocks = <&cpg CPG_CORE R9A09G056_SYS_0_PCLK>;
|
|
resets = <&cpg 0x30>;
|
|
};
|
|
|
|
xspi: spi@11030000 {
|
|
compatible = "renesas,r9a09g056-xspi", "renesas,r9a09g047-xspi";
|
|
reg = <0 0x11030000 0 0x10000>,
|
|
<0 0x20000000 0 0x10000000>;
|
|
reg-names = "regs", "dirmap";
|
|
interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 229 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "pulse", "err_pulse";
|
|
clocks = <&cpg CPG_MOD 0x9f>,
|
|
<&cpg CPG_MOD 0xa0>,
|
|
<&cpg CPG_CORE R9A09G056_SPI_CLK_SPI>,
|
|
<&cpg CPG_MOD 0xa1>;
|
|
clock-names = "ahb", "axi", "spi", "spix2";
|
|
resets = <&cpg 0xa3>, <&cpg 0xa4>;
|
|
reset-names = "hresetn", "aresetn";
|
|
power-domains = <&cpg>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ostm0: timer@11800000 {
|
|
compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
|
|
reg = <0x0 0x11800000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 17 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&cpg CPG_MOD 0x43>;
|
|
resets = <&cpg 0x6d>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ostm1: timer@11801000 {
|
|
compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
|
|
reg = <0x0 0x11801000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 18 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&cpg CPG_MOD 0x44>;
|
|
resets = <&cpg 0x6e>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ostm2: timer@14000000 {
|
|
compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
|
|
reg = <0x0 0x14000000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&cpg CPG_MOD 0x45>;
|
|
resets = <&cpg 0x6f>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ostm3: timer@14001000 {
|
|
compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
|
|
reg = <0x0 0x14001000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&cpg CPG_MOD 0x46>;
|
|
resets = <&cpg 0x70>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ostm4: timer@12c00000 {
|
|
compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
|
|
reg = <0x0 0x12c00000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&cpg CPG_MOD 0x47>;
|
|
resets = <&cpg 0x71>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ostm5: timer@12c01000 {
|
|
compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
|
|
reg = <0x0 0x12c01000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&cpg CPG_MOD 0x48>;
|
|
resets = <&cpg 0x72>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ostm6: timer@12c02000 {
|
|
compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
|
|
reg = <0x0 0x12c02000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&cpg CPG_MOD 0x49>;
|
|
resets = <&cpg 0x73>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ostm7: timer@12c03000 {
|
|
compatible = "renesas,r9a09g056-ostm", "renesas,ostm";
|
|
reg = <0x0 0x12c03000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 24 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&cpg CPG_MOD 0x4a>;
|
|
resets = <&cpg 0x74>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdt0: watchdog@11c00400 {
|
|
compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt";
|
|
reg = <0 0x11c00400 0 0x400>;
|
|
clocks = <&cpg CPG_MOD 0x4b>, <&cpg CPG_MOD 0x4c>;
|
|
clock-names = "pclk", "oscclk";
|
|
resets = <&cpg 0x75>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdt1: watchdog@14400000 {
|
|
compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt";
|
|
reg = <0 0x14400000 0 0x400>;
|
|
clocks = <&cpg CPG_MOD 0x4d>, <&cpg CPG_MOD 0x4e>;
|
|
clock-names = "pclk", "oscclk";
|
|
resets = <&cpg 0x76>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdt2: watchdog@13000000 {
|
|
compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt";
|
|
reg = <0 0x13000000 0 0x400>;
|
|
clocks = <&cpg CPG_MOD 0x4f>, <&cpg CPG_MOD 0x50>;
|
|
clock-names = "pclk", "oscclk";
|
|
resets = <&cpg 0x77>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdt3: watchdog@13000400 {
|
|
compatible = "renesas,r9a09g056-wdt", "renesas,r9a09g057-wdt";
|
|
reg = <0 0x13000400 0 0x400>;
|
|
clocks = <&cpg CPG_MOD 0x51>, <&cpg CPG_MOD 0x52>;
|
|
clock-names = "pclk", "oscclk";
|
|
resets = <&cpg 0x78>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scif: serial@11c01400 {
|
|
compatible = "renesas,scif-r9a09g056",
|
|
"renesas,scif-r9a09g057";
|
|
reg = <0 0x11c01400 0 0x400>;
|
|
interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 534 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 536 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 537 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "eri", "rxi", "txi", "bri", "dri",
|
|
"tei", "tei-dri", "rxi-edge", "txi-edge";
|
|
clocks = <&cpg CPG_MOD 0x8f>;
|
|
clock-names = "fck";
|
|
power-domains = <&cpg>;
|
|
resets = <&cpg 0x95>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@14400400 {
|
|
compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
|
|
reg = <0 0x14400400 0 0x400>;
|
|
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 507 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 506 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "tei", "ri", "ti", "spi", "sti",
|
|
"naki", "ali", "tmoi";
|
|
clocks = <&cpg CPG_MOD 0x94>;
|
|
resets = <&cpg 0x98>;
|
|
power-domains = <&cpg>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@14400800 {
|
|
compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
|
|
reg = <0 0x14400800 0 0x400>;
|
|
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 509 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 508 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "tei", "ri", "ti", "spi", "sti",
|
|
"naki", "ali", "tmoi";
|
|
clocks = <&cpg CPG_MOD 0x95>;
|
|
resets = <&cpg 0x99>;
|
|
power-domains = <&cpg>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@14400c00 {
|
|
compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
|
|
reg = <0 0x14400c00 0 0x400>;
|
|
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 511 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 510 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "tei", "ri", "ti", "spi", "sti",
|
|
"naki", "ali", "tmoi";
|
|
clocks = <&cpg CPG_MOD 0x96>;
|
|
resets = <&cpg 0x9a>;
|
|
power-domains = <&cpg>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@14401000 {
|
|
compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
|
|
reg = <0 0x14401000 0 0x400>;
|
|
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 513 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 512 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "tei", "ri", "ti", "spi", "sti",
|
|
"naki", "ali", "tmoi";
|
|
clocks = <&cpg CPG_MOD 0x97>;
|
|
resets = <&cpg 0x9b>;
|
|
power-domains = <&cpg>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@14401400 {
|
|
compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
|
|
reg = <0 0x14401400 0 0x400>;
|
|
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 515 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 514 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "tei", "ri", "ti", "spi", "sti",
|
|
"naki", "ali", "tmoi";
|
|
clocks = <&cpg CPG_MOD 0x98>;
|
|
resets = <&cpg 0x9c>;
|
|
power-domains = <&cpg>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c5: i2c@14401800 {
|
|
compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
|
|
reg = <0 0x14401800 0 0x400>;
|
|
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 517 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 516 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "tei", "ri", "ti", "spi", "sti",
|
|
"naki", "ali", "tmoi";
|
|
clocks = <&cpg CPG_MOD 0x99>;
|
|
resets = <&cpg 0x9d>;
|
|
power-domains = <&cpg>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c6: i2c@14401c00 {
|
|
compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
|
|
reg = <0 0x14401c00 0 0x400>;
|
|
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 519 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 518 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "tei", "ri", "ti", "spi", "sti",
|
|
"naki", "ali", "tmoi";
|
|
clocks = <&cpg CPG_MOD 0x9a>;
|
|
resets = <&cpg 0x9e>;
|
|
power-domains = <&cpg>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c7: i2c@14402000 {
|
|
compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
|
|
reg = <0 0x14402000 0 0x400>;
|
|
interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 521 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 520 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "tei", "ri", "ti", "spi", "sti",
|
|
"naki", "ali", "tmoi";
|
|
clocks = <&cpg CPG_MOD 0x9b>;
|
|
resets = <&cpg 0x9f>;
|
|
power-domains = <&cpg>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c8: i2c@11c01000 {
|
|
compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
|
|
reg = <0 0x11c01000 0 0x400>;
|
|
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 523 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 522 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "tei", "ri", "ti", "spi", "sti",
|
|
"naki", "ali", "tmoi";
|
|
clocks = <&cpg CPG_MOD 0x93>;
|
|
resets = <&cpg 0xa0>;
|
|
power-domains = <&cpg>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpu: gpu@14850000 {
|
|
compatible = "renesas,r9a09g056-mali",
|
|
"arm,mali-bifrost";
|
|
reg = <0x0 0x14850000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 884 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 883 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "job", "mmu", "gpu", "event";
|
|
clocks = <&cpg CPG_MOD 0xf0>,
|
|
<&cpg CPG_MOD 0xf1>,
|
|
<&cpg CPG_MOD 0xf2>;
|
|
clock-names = "gpu", "bus", "bus_ace";
|
|
resets = <&cpg 0xdd>,
|
|
<&cpg 0xde>,
|
|
<&cpg 0xdf>;
|
|
reset-names = "rst", "axi_rst", "ace_rst";
|
|
power-domains = <&cpg>;
|
|
operating-points-v2 = <&gpu_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gic: interrupt-controller@14900000 {
|
|
compatible = "arm,gic-v3";
|
|
reg = <0x0 0x14900000 0 0x20000>,
|
|
<0x0 0x14940000 0 0x80000>;
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
|
|
ohci0: usb@15800000 {
|
|
compatible = "generic-ohci";
|
|
reg = <0 0x15800000 0 0x100>;
|
|
interrupts = <GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>;
|
|
resets = <&usb20phyrst>, <&cpg 0xac>;
|
|
phys = <&usb2_phy0 1>;
|
|
phy-names = "usb";
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci0: usb@15800100 {
|
|
compatible = "generic-ehci";
|
|
reg = <0 0x15800100 0 0x100>;
|
|
interrupts = <GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb6>;
|
|
resets = <&usb20phyrst>, <&cpg 0xac>;
|
|
phys = <&usb2_phy0 2>;
|
|
phy-names = "usb";
|
|
companion = <&ohci0>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2_phy0: usb-phy@15800200 {
|
|
compatible = "renesas,usb2-phy-r9a09g056", "renesas,usb2-phy-r9a09g057";
|
|
reg = <0 0x15800200 0 0x700>;
|
|
interrupts = <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 0xb3>,
|
|
<&cpg CPG_CORE R9A09G056_USB2_0_CLK_CORE0>;
|
|
clock-names = "fck", "usb_x1";
|
|
resets = <&usb20phyrst>;
|
|
#phy-cells = <1>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hsusb: usb@15820000 {
|
|
compatible = "renesas,usbhs-r9a09g056",
|
|
"renesas,rzg2l-usbhs";
|
|
reg = <0 0x15820000 0 0x10000>;
|
|
interrupts = <GIC_SPI 751 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 0xb3>, <&cpg CPG_MOD 0xb5>;
|
|
resets = <&usb20phyrst>,
|
|
<&cpg 0xae>;
|
|
phys = <&usb2_phy0 3>;
|
|
phy-names = "usb";
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb20phyrst: usb20phy-reset@15830000 {
|
|
compatible = "renesas,r9a09g056-usb2phy-reset",
|
|
"renesas,r9a09g057-usb2phy-reset";
|
|
reg = <0 0x15830000 0 0x10000>;
|
|
clocks = <&cpg CPG_MOD 0xb6>;
|
|
resets = <&cpg 0xaf>;
|
|
power-domains = <&cpg>;
|
|
#reset-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhi0: mmc@15c00000 {
|
|
compatible = "renesas,sdhi-r9a09g056", "renesas,sdhi-r9a09g057";
|
|
reg = <0x0 0x15c00000 0 0x10000>;
|
|
interrupts = <GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 0xa3>, <&cpg CPG_MOD 0xa5>,
|
|
<&cpg CPG_MOD 0xa4>, <&cpg CPG_MOD 0xa6>;
|
|
clock-names = "core", "clkh", "cd", "aclk";
|
|
resets = <&cpg 0xa7>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
|
|
sdhi0_vqmmc: vqmmc-regulator {
|
|
regulator-name = "SDHI0-VQMMC";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
sdhi1: mmc@15c10000 {
|
|
compatible = "renesas,sdhi-r9a09g056", "renesas,sdhi-r9a09g057";
|
|
reg = <0x0 0x15c10000 0 0x10000>;
|
|
interrupts = <GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 0xa7>, <&cpg CPG_MOD 0xa9>,
|
|
<&cpg CPG_MOD 0xa8>, <&cpg CPG_MOD 0xaa>;
|
|
clock-names = "core", "clkh", "cd", "aclk";
|
|
resets = <&cpg 0xa8>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
|
|
sdhi1_vqmmc: vqmmc-regulator {
|
|
regulator-name = "SDHI1-VQMMC";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
sdhi2: mmc@15c20000 {
|
|
compatible = "renesas,sdhi-r9a09g056", "renesas,sdhi-r9a09g057";
|
|
reg = <0x0 0x15c20000 0 0x10000>;
|
|
interrupts = <GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 0xab>, <&cpg CPG_MOD 0xad>,
|
|
<&cpg CPG_MOD 0xac>, <&cpg CPG_MOD 0xae>;
|
|
clock-names = "core", "clkh", "cd", "aclk";
|
|
resets = <&cpg 0xa9>;
|
|
power-domains = <&cpg>;
|
|
status = "disabled";
|
|
|
|
sdhi2_vqmmc: vqmmc-regulator {
|
|
regulator-name = "SDHI2-VQMMC";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
eth0: ethernet@15c30000 {
|
|
compatible = "renesas,r9a09g056-gbeth", "renesas,rzv2h-gbeth",
|
|
"snps,dwmac-5.20";
|
|
reg = <0 0x15c30000 0 0x10000>;
|
|
interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 775 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
|
|
"rx-queue-0", "rx-queue-1", "rx-queue-2",
|
|
"rx-queue-3", "tx-queue-0", "tx-queue-1",
|
|
"tx-queue-2", "tx-queue-3";
|
|
clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
|
|
<&cpg CPG_CORE R9A09G056_GBETH_0_CLK_PTP_REF_I>,
|
|
<&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
|
|
<&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
|
|
clock-names = "stmmaceth", "pclk", "ptp_ref",
|
|
"tx", "rx", "tx-180", "rx-180";
|
|
resets = <&cpg 0xb0>;
|
|
power-domains = <&cpg>;
|
|
snps,multicast-filter-bins = <256>;
|
|
snps,perfect-filter-entries = <128>;
|
|
rx-fifo-depth = <8192>;
|
|
tx-fifo-depth = <8192>;
|
|
snps,fixed-burst;
|
|
snps,no-pbl-x8;
|
|
snps,force_thresh_dma_mode;
|
|
snps,axi-config = <&stmmac_axi_setup>;
|
|
snps,mtl-rx-config = <&mtl_rx_setup0>;
|
|
snps,mtl-tx-config = <&mtl_tx_setup0>;
|
|
snps,txpbl = <32>;
|
|
snps,rxpbl = <32>;
|
|
status = "disabled";
|
|
|
|
mdio0: mdio {
|
|
compatible = "snps,dwmac-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mtl_rx_setup0: rx-queues-config {
|
|
snps,rx-queues-to-use = <4>;
|
|
snps,rx-sched-sp;
|
|
|
|
queue0 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x1>;
|
|
snps,map-to-dma-channel = <0>;
|
|
};
|
|
|
|
queue1 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x2>;
|
|
snps,map-to-dma-channel = <1>;
|
|
};
|
|
|
|
queue2 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x4>;
|
|
snps,map-to-dma-channel = <2>;
|
|
};
|
|
|
|
queue3 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x8>;
|
|
snps,map-to-dma-channel = <3>;
|
|
};
|
|
};
|
|
|
|
mtl_tx_setup0: tx-queues-config {
|
|
snps,tx-queues-to-use = <4>;
|
|
|
|
queue0 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x1>;
|
|
};
|
|
|
|
queue1 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x2>;
|
|
};
|
|
|
|
queue2 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x4>;
|
|
};
|
|
|
|
queue3 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x8>;
|
|
};
|
|
};
|
|
};
|
|
|
|
eth1: ethernet@15c40000 {
|
|
compatible = "renesas,r9a09g056-gbeth", "renesas,rzv2h-gbeth",
|
|
"snps,dwmac-5.20";
|
|
reg = <0 0x15c40000 0 0x10000>;
|
|
interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq", "eth_wake_irq", "eth_lpi",
|
|
"rx-queue-0", "rx-queue-1", "rx-queue-2",
|
|
"rx-queue-3", "tx-queue-0", "tx-queue-1",
|
|
"tx-queue-2", "tx-queue-3";
|
|
clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
|
|
<&cpg CPG_CORE R9A09G056_GBETH_1_CLK_PTP_REF_I>,
|
|
<&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
|
|
<&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
|
|
clock-names = "stmmaceth", "pclk", "ptp_ref",
|
|
"tx", "rx", "tx-180", "rx-180";
|
|
resets = <&cpg 0xb1>;
|
|
power-domains = <&cpg>;
|
|
snps,multicast-filter-bins = <256>;
|
|
snps,perfect-filter-entries = <128>;
|
|
rx-fifo-depth = <8192>;
|
|
tx-fifo-depth = <8192>;
|
|
snps,fixed-burst;
|
|
snps,no-pbl-x8;
|
|
snps,force_thresh_dma_mode;
|
|
snps,axi-config = <&stmmac_axi_setup>;
|
|
snps,mtl-rx-config = <&mtl_rx_setup1>;
|
|
snps,mtl-tx-config = <&mtl_tx_setup1>;
|
|
snps,txpbl = <32>;
|
|
snps,rxpbl = <32>;
|
|
status = "disabled";
|
|
|
|
mdio1: mdio {
|
|
compatible = "snps,dwmac-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mtl_rx_setup1: rx-queues-config {
|
|
snps,rx-queues-to-use = <4>;
|
|
snps,rx-sched-sp;
|
|
|
|
queue0 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x1>;
|
|
snps,map-to-dma-channel = <0>;
|
|
};
|
|
|
|
queue1 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x2>;
|
|
snps,map-to-dma-channel = <1>;
|
|
};
|
|
|
|
queue2 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x4>;
|
|
snps,map-to-dma-channel = <2>;
|
|
};
|
|
|
|
queue3 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x8>;
|
|
snps,map-to-dma-channel = <3>;
|
|
};
|
|
};
|
|
|
|
mtl_tx_setup1: tx-queues-config {
|
|
snps,tx-queues-to-use = <4>;
|
|
|
|
queue0 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x1>;
|
|
};
|
|
|
|
queue1 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x2>;
|
|
};
|
|
|
|
queue2 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x4>;
|
|
};
|
|
|
|
queue3 {
|
|
snps,dcb-algorithm;
|
|
snps,priority = <0x8>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
stmmac_axi_setup: stmmac-axi-config {
|
|
snps,lpi_en;
|
|
snps,wr_osr_lmt = <0xf>;
|
|
snps,rd_osr_lmt = <0xf>;
|
|
snps,blen = <16 8 4 0 0 0 0>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
|
|
<&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
|
|
<&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
|
|
<&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
|
|
<&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
|
|
};
|
|
};
|