Proxmox-Port/linux-loongson
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson synced 2025-08-31 22:23:05 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
loongarch-next
linux-loongson/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
Maud Spierings fff7f1c844 arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth 
Add bluetooth for the asus vivobook s15
Describe wlan configuration

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://lore.kernel.org/r/20250328-asus_qcom_display-v7-1-322d2bff937d@hotmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-05-19 15:33:50 -05:00

1007 lines
20 KiB
Plaintext
Raw Permalink Blame History

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
* Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "x1e80100.dtsi"
#include "x1e80100-pmics.dtsi"
/ {
model = "ASUS Vivobook S 15";
compatible = "asus,vivobook-s15", "qcom,x1e80100";
chassis-type = "laptop";
aliases {
serial1 = &uart14;
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&hall_int_n_default>;
pinctrl-names = "default";
switch-lid {
gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
wakeup-source;
wakeup-event-action = <EV_ACT_DEASSERTED>;
};
};
pmic-glink {
compatible = "qcom,x1e80100-pmic-glink",
"qcom,sm8550-pmic-glink",
"qcom,pmic-glink";
orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
<&tlmm 123 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
/* Left-side port, closer to the screen */
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_ss0_hs_in: endpoint {
remote-endpoint = <&usb_1_ss0_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss0_ss_in: endpoint {
remote-endpoint = <&usb_1_ss0_qmpphy_out>;
};
};
};
};
/* Left-side port, farther from the screen */
connector@1 {
compatible = "usb-c-connector";
reg = <1>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_ss1_hs_in: endpoint {
remote-endpoint = <&usb_1_ss1_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss1_ss_in: endpoint {
remote-endpoint = <&usb_1_ss1_qmpphy_out>;
};
};
};
};
};
reserved-memory {
linux,cma {
compatible = "shared-dma-pool";
size = <0x0 0x8000000>;
reusable;
linux,cma-default;
};
};
vreg_edp_3p3: regulator-edp-3p3 {
compatible = "regulator-fixed";
regulator-name = "VREG_EDP_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&edp_reg_en>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
};
vreg_nvme: regulator-nvme {
compatible = "regulator-fixed";
regulator-name = "VREG_NVME_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&nvme_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vph_pwr: regulator-vph-pwr {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-boot-on;
};
/*
* TODO: These two regulators are actually part of the removable M.2
* card and not the CRD mainboard. Need to describe this differently.
* Functionally it works correctly, because all we need to do is to
* turn on the actual 3.3V supply above.
*/
vreg_wcn_0p95: regulator-wcn-0p95 {
compatible = "regulator-fixed";
regulator-name = "VREG_WCN_0P95";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <950000>;
vin-supply = <&vreg_wcn_3p3>;
};
vreg_wcn_1p9: regulator-wcn-1p9 {
compatible = "regulator-fixed";
regulator-name = "VREG_WCN_1P9";
regulator-min-microvolt = <1900000>;
regulator-max-microvolt = <1900000>;
vin-supply = <&vreg_wcn_3p3>;
};
vreg_wcn_3p3: regulator-wcn-3p3 {
compatible = "regulator-fixed";
regulator-name = "VREG_WCN_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&wcn_sw_en>;
pinctrl-names = "default";
regulator-boot-on;
};
wcn7850-pmu {
compatible = "qcom,wcn7850-pmu";
vdd-supply = <&vreg_wcn_0p95>;
vddio-supply = <&vreg_l15b_1p8>;
vddaon-supply = <&vreg_wcn_0p95>;
vdddig-supply = <&vreg_wcn_0p95>;
vddrfa1p2-supply = <&vreg_wcn_1p9>;
vddrfa1p8-supply = <&vreg_wcn_1p9>;
wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&wcn_wlan_en>, <&wcn_bt_en>;
pinctrl-names = "default";
regulators {
vreg_pmu_rfa_cmn: ldo0 {
regulator-name = "vreg_pmu_rfa_cmn";
};
vreg_pmu_aon_0p59: ldo1 {
regulator-name = "vreg_pmu_aon_0p59";
};
vreg_pmu_wlcx_0p8: ldo2 {
regulator-name = "vreg_pmu_wlcx_0p8";
};
vreg_pmu_wlmx_0p85: ldo3 {
regulator-name = "vreg_pmu_wlmx_0p85";
};
vreg_pmu_btcmx_0p85: ldo4 {
regulator-name = "vreg_pmu_btcmx_0p85";
};
vreg_pmu_rfa_0p8: ldo5 {
regulator-name = "vreg_pmu_rfa_0p8";
};
vreg_pmu_rfa_1p2: ldo6 {
regulator-name = "vreg_pmu_rfa_1p2";
};
vreg_pmu_rfa_1p8: ldo7 {
regulator-name = "vreg_pmu_rfa_1p8";
};
vreg_pmu_pcie_0p9: ldo8 {
regulator-name = "vreg_pmu_pcie_0p9";
};
vreg_pmu_pcie_1p8: ldo9 {
regulator-name = "vreg_pmu_pcie_1p8";
};
};
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8550-rpmh-regulators";
qcom,pmic-id = "b";
vdd-bob1-supply = <&vph_pwr>;
vdd-bob2-supply = <&vph_pwr>;
vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
vdd-l2-l13-l14-supply = <&vreg_bob1>;
vdd-l5-l16-supply = <&vreg_bob1>;
vdd-l6-l7-supply = <&vreg_bob2>;
vdd-l8-l9-supply = <&vreg_bob1>;
vdd-l12-supply = <&vreg_s5j_1p2>;
vdd-l15-supply = <&vreg_s4c_1p8>;
vdd-l17-supply = <&vreg_bob2>;
vreg_bob1: bob1 {
regulator-name = "vreg_bob1";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob2: bob2 {
regulator-name = "vreg_bob2";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2b_3p0: ldo2 {
regulator-name = "vreg_l2b_3p0";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3100000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4b_1p8: ldo4 {
regulator-name = "vreg_l4b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13b_3p0: ldo13 {
regulator-name = "vreg_l13b_3p0";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14b_3p0: ldo14 {
regulator-name = "vreg_l14b_3p0";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15b_1p8: ldo15 {
regulator-name = "vreg_l15b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8550ve-rpmh-regulators";
qcom,pmic-id = "c";
vdd-l1-supply = <&vreg_s5j_1p2>;
vdd-l2-supply = <&vreg_s1f_0p7>;
vdd-l3-supply = <&vreg_s1f_0p7>;
vdd-s4-supply = <&vph_pwr>;
vreg_l3c_0p8: ldo3 {
regulator-name = "vreg_l3c_0p8";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s4c_1p8: smps4 {
regulator-name = "vreg_s4c_1p8";
regulator-min-microvolt = <1856000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-2 {
compatible = "qcom,pmc8380-rpmh-regulators";
qcom,pmic-id = "d";
vdd-l1-supply = <&vreg_s1f_0p7>;
vdd-l2-supply = <&vreg_s1f_0p7>;
vdd-l3-supply = <&vreg_s4c_1p8>;
vdd-s1-supply = <&vph_pwr>;
vreg_l1d_0p8: ldo1 {
regulator-name = "vreg_l1d_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2d_0p9: ldo2 {
regulator-name = "vreg_l2d_0p9";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3d_1p8: ldo3 {
regulator-name = "vreg_l3d_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-3 {
compatible = "qcom,pmc8380-rpmh-regulators";
qcom,pmic-id = "e";
vdd-l2-supply = <&vreg_s1f_0p7>;
vdd-l3-supply = <&vreg_s5j_1p2>;
vreg_l2e_0p8: ldo2 {
regulator-name = "vreg_l2e_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3e_1p2: ldo3 {
regulator-name = "vreg_l3e_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-4 {
compatible = "qcom,pmc8380-rpmh-regulators";
qcom,pmic-id = "f";
vdd-l1-supply = <&vreg_s5j_1p2>;
vdd-l2-supply = <&vreg_s5j_1p2>;
vdd-l3-supply = <&vreg_s5j_1p2>;
vdd-s1-supply = <&vph_pwr>;
vreg_s1f_0p7: smps1 {
regulator-name = "vreg_s1f_0p7";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1100000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-6 {
compatible = "qcom,pm8550ve-rpmh-regulators";
qcom,pmic-id = "i";
vdd-l1-supply = <&vreg_s4c_1p8>;
vdd-l2-supply = <&vreg_s5j_1p2>;
vdd-l3-supply = <&vreg_s1f_0p7>;
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vreg_l3i_0p8: ldo3 {
regulator-name = "vreg_l3i_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-7 {
compatible = "qcom,pm8550ve-rpmh-regulators";
qcom,pmic-id = "j";
vdd-l1-supply = <&vreg_s1f_0p7>;
vdd-l2-supply = <&vreg_s5j_1p2>;
vdd-l3-supply = <&vreg_s1f_0p7>;
vdd-s5-supply = <&vph_pwr>;
vreg_s5j_1p2: smps5 {
regulator-name = "vreg_s5j_1p2";
regulator-min-microvolt = <1256000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1j_0p8: ldo1 {
regulator-name = "vreg_l1j_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2j_1p2: ldo2 {
regulator-name = "vreg_l2j_1p2";
regulator-min-microvolt = <1256000>;
regulator-max-microvolt = <1256000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3j_0p8: ldo3 {
regulator-name = "vreg_l3j_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&gpu {
status = "okay";
zap-shader {
firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn";
};
};
&i2c0 {
clock-frequency = <400000>;
status = "okay";
touchpad@15 {
compatible = "hid-over-i2c";
reg = <0x15>;
hid-descr-addr = <0x1>;
interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&tpad_default>;
pinctrl-names = "default";
wakeup-source;
};
};
&i2c1 {
clock-frequency = <400000>;
status = "okay";
/* PS8830 USB4 Retimer? @ 0x8 */
};
&i2c3 {
clock-frequency = <400000>;
status = "okay";
/* PS8830 USB4 Retimer? @ 0x8 */
};
&i2c5 {
clock-frequency = <400000>;
status = "okay";
keyboard@3a {
compatible = "hid-over-i2c";
reg = <0x3a>;
hid-descr-addr = <0x1>;
interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&kybd_default>;
pinctrl-names = "default";
wakeup-source;
};
eusb5_repeater: redriver@43 {
compatible = "nxp,ptn3222";
reg = <0x43>;
#phy-cells = <0>;
vdd3v3-supply = <&vreg_l13b_3p0>;
vdd1v8-supply = <&vreg_l4b_1p8>;
reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&eusb5_reset_n>;
pinctrl-names = "default";
};
eusb3_repeater: redriver@47 {
compatible = "nxp,ptn3222";
reg = <0x47>;
#phy-cells = <0>;
vdd3v3-supply = <&vreg_l13b_3p0>;
vdd1v8-supply = <&vreg_l4b_1p8>;
reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&eusb3_reset_n>;
pinctrl-names = "default";
};
eusb6_repeater: redriver@4f {
compatible = "nxp,ptn3222";
reg = <0x4f>;
#phy-cells = <0>;
vdd3v3-supply = <&vreg_l13b_3p0>;
vdd1v8-supply = <&vreg_l4b_1p8>;
reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&eusb6_reset_n>;
pinctrl-names = "default";
};
/* EC @ 0x76 */
};
&i2c7 {
clock-frequency = <400000>;
status = "okay";
/* PS8830 USB4 Retimer? @ 0x8 */
};
&mdss {
status = "okay";
};
&mdss_dp3 {
/delete-property/ #sound-dai-cells;
status = "okay";
aux-bus {
panel {
compatible = "samsung,atna56ac03", "samsung,atna33xc20";
enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
power-supply = <&vreg_edp_3p3>;
pinctrl-0 = <&edp_bl_en>;
pinctrl-names = "default";
port {
edp_panel_in: endpoint {
remote-endpoint = <&mdss_dp3_out>;
};
};
};
};
ports {
port@1 {
reg = <1>;
mdss_dp3_out: endpoint {
data-lanes = <0 1 2 3>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
remote-endpoint = <&edp_panel_in>;
};
};
};
};
&mdss_dp3_phy {
vdda-phy-supply = <&vreg_l3j_0p8>;
vdda-pll-supply = <&vreg_l2j_1p2>;
status = "okay";
};
&pcie4 {
perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie4_default>;
pinctrl-names = "default";
status = "okay";
};
&pcie4_phy {
vdda-phy-supply = <&vreg_l3i_0p8>;
vdda-pll-supply = <&vreg_l3e_1p2>;
status = "okay";
};
&pcie4_port0 {
wifi@0 {
compatible = "pci17cb,1107";
reg = <0x10000 0x0 0x0 0x0 0x0>;
vddaon-supply = <&vreg_pmu_aon_0p59>;
vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
};
};
&pcie6a {
perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&vreg_nvme>;
pinctrl-0 = <&pcie6a_default>;
pinctrl-names = "default";
status = "okay";
};
&pcie6a_phy {
vdda-phy-supply = <&vreg_l1d_0p8>;
vdda-pll-supply = <&vreg_l2j_1p2>;
status = "okay";
};
&pmc8380_3_gpios {
edp_bl_en: edp-bl-en-state {
pins = "gpio4";
function = "normal";
power-source = <1>; /* 1.8 V */
qcom,drive-strength = <PMIC_GPIO_STRENGTH_MED>;
bias-pull-down;
input-disable;
output-enable;
};
};
&qupv3_0 {
status = "okay";
};
&qupv3_1 {
status = "okay";
};
&qupv3_2 {
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcadsp8380.mbn",
"qcom/x1e80100/ASUSTeK/vivobook-s15/adsp_dtbs.elf";
status = "okay";
};
&remoteproc_cdsp {
firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qccdsp8380.mbn",
"qcom/x1e80100/ASUSTeK/vivobook-s15/cdsp_dtbs.elf";
status = "okay";
};
&smb2360_0 {
status = "okay";
};
&smb2360_0_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l2b_3p0>;
};
&smb2360_1 {
status = "okay";
};
&smb2360_1_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l14b_3p0>;
};
&tlmm {
gpio-reserved-ranges = <34 2>, /* Unused */
<44 4>, /* SPI (TPM) */
<238 1>; /* UFS Reset */
edp_reg_en: edp-reg-en-state {
pins = "gpio70";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
eusb3_reset_n: eusb3-reset-n-state {
pins = "gpio6";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
output-low;
};
eusb5_reset_n: eusb5-reset-n-state {
pins = "gpio7";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
output-low;
};
eusb6_reset_n: eusb6-reset-n-state {
pins = "gpio184";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
output-low;
};
hall_int_n_default: hall-int-n-state {
pins = "gpio92";
function = "gpio";
bias-disable;
};
kybd_default: kybd-default-state {
pins = "gpio67";
function = "gpio";
bias-disable;
};
nvme_reg_en: nvme-reg-en-state {
pins = "gpio18";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
pcie4_default: pcie4-default-state {
clkreq-n-pins {
pins = "gpio147";
function = "pcie4_clk";
drive-strength = <2>;
bias-pull-up;
};
perst-n-pins {
pins = "gpio146";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
wake-n-pins {
pins = "gpio148";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
pcie6a_default: pcie6a-default-state {
clkreq-n-pins {
pins = "gpio153";
function = "pcie6a_clk";
drive-strength = <2>;
bias-pull-up;
};
perst-n-pins {
pins = "gpio152";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
wake-n-pins {
pins = "gpio154";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
tpad_default: tpad-default-state {
pins = "gpio3";
function = "gpio";
bias-disable;
};
wcn_bt_en: wcn-bt-en-state {
pins = "gpio116";
function = "gpio";
drive-strength = <16>;
bias-pull-down;
};
wcn_sw_en: wcn-sw-en-state {
pins = "gpio214";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
wcn_wlan_en: wcn-wlan-en-state {
pins = "gpio117";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
};
&uart14 {
status = "okay";
bluetooth {
compatible = "qcom,wcn7850-bt";
max-speed = <3200000>;
vddaon-supply = <&vreg_pmu_aon_0p59>;
vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
};
};
&usb_1_ss0_hsphy {
vdd-supply = <&vreg_l3j_0p8>;
vdda12-supply = <&vreg_l2j_1p2>;
phys = <&smb2360_0_eusb2_repeater>;
status = "okay";
};
&usb_1_ss0_qmpphy {
vdda-phy-supply = <&vreg_l2j_1p2>;
vdda-pll-supply = <&vreg_l1j_0p8>;
status = "okay";
};
&usb_1_ss0 {
status = "okay";
};
&usb_1_ss0_dwc3 {
dr_mode = "host";
};
&usb_1_ss0_dwc3_hs {
remote-endpoint = <&pmic_glink_ss0_hs_in>;
};
&usb_1_ss0_qmpphy_out {
remote-endpoint = <&pmic_glink_ss0_ss_in>;
};
&usb_1_ss1_hsphy {
vdd-supply = <&vreg_l3j_0p8>;
vdda12-supply = <&vreg_l2j_1p2>;
phys = <&smb2360_1_eusb2_repeater>;
status = "okay";
};
&usb_1_ss1_qmpphy {
vdda-phy-supply = <&vreg_l2j_1p2>;
vdda-pll-supply = <&vreg_l2d_0p9>;
status = "okay";
};
&usb_1_ss1 {
status = "okay";
};
&usb_1_ss1_dwc3 {
dr_mode = "host";
};
&usb_1_ss1_dwc3_hs {
remote-endpoint = <&pmic_glink_ss1_hs_in>;
};
&usb_1_ss1_qmpphy_out {
remote-endpoint = <&pmic_glink_ss1_ss_in>;
};
&usb_2 {
status = "okay";
};
&usb_2_dwc3 {
dr_mode = "host";
};
&usb_2_hsphy {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
phys = <&eusb5_repeater>;
status = "okay";
};
&usb_mp {
status = "okay";
};
&usb_mp_hsphy0 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
phys = <&eusb6_repeater>;
status = "okay";
};
&usb_mp_hsphy1 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
phys = <&eusb3_repeater>;
status = "okay";
};
&usb_mp_qmpphy0 {
vdda-phy-supply = <&vreg_l3e_1p2>;
vdda-pll-supply = <&vreg_l3c_0p8>;
status = "okay";
};
&usb_mp_qmpphy1 {
vdda-phy-supply = <&vreg_l3e_1p2>;
vdda-pll-supply = <&vreg_l3c_0p8>;
status = "okay";
};
Reference in New Issue View Git Blame Copy Permalink