mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-31 14:13:39 +00:00
60a2c9cc15
There are 4 Qualcomm PMIC Die Temp Alarm Sensor Devices under windows os,
in separate dt files, pm8350c and pmr735a have already support temp alarm,
add the rest 2 devices for sc8280xp-pmic.
Temperature trip points are from dsdt(Temp. in tenths of degrees Kelvin).
example:
Name (TPSV, 0x0E60) // 0x0E60 - 2730 = 950
Method (_PSV, 0, NotSerialized) // _PSV: Passive Temperature
{
Return (\_SB.TZ15.TPSV)
}
Name (TCRT, 0x0F28) // 0X0F28 - 2730 = 1150
Method (_CRT, 0, NotSerialized) // _CRT: Critical Temperature
{
Return (\_SB.TZ15.TCRT)
}
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20250111083209.262269-2-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
305 lines
6.6 KiB
Plaintext
305 lines
6.6 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2022, Linaro Limited
|
|
*/
|
|
|
|
#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
|
|
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
|
|
#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/spmi/spmi.h>
|
|
|
|
/ {
|
|
thermal-zones {
|
|
pm8280_1_thermal: pm8280-1-thermal {
|
|
polling-delay-passive = <100>;
|
|
|
|
thermal-sensors = <&pm8280_1_temp_alarm>;
|
|
|
|
trips {
|
|
trip0 {
|
|
temperature = <95000>;
|
|
hysteresis = <0>;
|
|
type = "passive";
|
|
};
|
|
|
|
trip1 {
|
|
temperature = <115000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
pmc8280c_thermal: pmc8280c-thermal {
|
|
polling-delay-passive = <100>;
|
|
|
|
thermal-sensors = <&pmc8280c_temp_alarm>;
|
|
|
|
trips {
|
|
trip0 {
|
|
temperature = <95000>;
|
|
hysteresis = <0>;
|
|
type = "passive";
|
|
};
|
|
|
|
trip1 {
|
|
temperature = <115000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
pm8280_2_thermal: pm8280-2-thermal {
|
|
polling-delay-passive = <100>;
|
|
|
|
thermal-sensors = <&pm8280_2_temp_alarm>;
|
|
|
|
trips {
|
|
trip0 {
|
|
temperature = <95000>;
|
|
hysteresis = <0>;
|
|
type = "passive";
|
|
};
|
|
|
|
trip1 {
|
|
temperature = <115000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
pmr735a_thermal: pmr735a-thermal {
|
|
polling-delay-passive = <100>;
|
|
|
|
thermal-sensors = <&pmr735a_temp_alarm>;
|
|
|
|
trips {
|
|
trip0 {
|
|
temperature = <95000>;
|
|
hysteresis = <0>;
|
|
type = "passive";
|
|
};
|
|
|
|
trip1 {
|
|
temperature = <115000>;
|
|
hysteresis = <0>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&spmi_bus {
|
|
pmk8280: pmic@0 {
|
|
compatible = "qcom,pmk8350", "qcom,spmi-pmic";
|
|
reg = <0x0 SPMI_USID>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pmk8280_pon: pon@1300 {
|
|
compatible = "qcom,pmk8350-pon";
|
|
reg = <0x1300>, <0x800>;
|
|
reg-names = "hlos", "pbs";
|
|
|
|
pmk8280_pon_pwrkey: pwrkey {
|
|
compatible = "qcom,pmk8350-pwrkey";
|
|
interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
|
|
linux,code = <KEY_POWER>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pmk8280_pon_resin: resin {
|
|
compatible = "qcom,pmk8350-resin";
|
|
interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
pmk8280_vadc: adc@3100 {
|
|
compatible = "qcom,spmi-adc7";
|
|
reg = <0x3100>;
|
|
interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#io-channel-cells = <1>;
|
|
|
|
channel@3 {
|
|
reg = <PMK8350_ADC7_DIE_TEMP>;
|
|
qcom,pre-scaling = <1 1>;
|
|
label = "pmk8350_die_temp";
|
|
};
|
|
|
|
channel@44 {
|
|
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,ratiometric;
|
|
label = "pmk8350_xo_therm";
|
|
};
|
|
|
|
channel@103 {
|
|
reg = <PM8350_ADC7_DIE_TEMP(1)>;
|
|
qcom,pre-scaling = <1 1>;
|
|
label = "pmc8280_1_die_temp";
|
|
};
|
|
|
|
channel@303 {
|
|
reg = <PM8350_ADC7_DIE_TEMP(3)>;
|
|
qcom,pre-scaling = <1 1>;
|
|
label = "pmc8280_2_die_temp";
|
|
};
|
|
|
|
channel@403 {
|
|
reg = <PMR735A_ADC7_DIE_TEMP>;
|
|
qcom,pre-scaling = <1 1>;
|
|
label = "pmr735a_die_temp";
|
|
};
|
|
};
|
|
|
|
pmk8280_adc_tm: adc-tm@3400 {
|
|
compatible = "qcom,spmi-adc-tm5-gen2";
|
|
reg = <0x3400>;
|
|
interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#thermal-sensor-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pmk8280_rtc: rtc@6100 {
|
|
compatible = "qcom,pmk8350-rtc";
|
|
reg = <0x6100>, <0x6200>;
|
|
reg-names = "rtc", "alarm";
|
|
interrupts-extended = <&spmi_bus 0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
|
|
wakeup-source;
|
|
status = "disabled";
|
|
};
|
|
|
|
pmk8280_sdam_6: nvram@8500 {
|
|
compatible = "qcom,spmi-sdam";
|
|
reg = <0x8500>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x8500 0x100>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
pmc8280_1: pmic@1 {
|
|
compatible = "qcom,pm8350", "qcom,spmi-pmic";
|
|
reg = <0x1 SPMI_USID>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pm8280_1_temp_alarm: temp-alarm@a00 {
|
|
compatible = "qcom,spmi-temp-alarm";
|
|
reg = <0xa00>;
|
|
interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
|
io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(1)>;
|
|
io-channel-names = "thermal";
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
pmc8280_1_gpios: gpio@8800 {
|
|
compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
|
|
reg = <0x8800>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pmc8280_1_gpios 0 0 10>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
pmc8280c: pmic@2 {
|
|
compatible = "qcom,pm8350c", "qcom,spmi-pmic";
|
|
reg = <0x2 SPMI_USID>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pmc8280c_temp_alarm: temp-alarm@a00 {
|
|
compatible = "qcom,spmi-temp-alarm";
|
|
reg = <0xa00>;
|
|
interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
pmc8280c_gpios: gpio@8800 {
|
|
compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
|
|
reg = <0x8800>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pmc8280c_gpios 0 0 9>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
pmc8280c_lpg: pwm {
|
|
compatible = "qcom,pm8350c-pwm";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
#pwm-cells = <2>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
pmc8280_2: pmic@3 {
|
|
compatible = "qcom,pm8350", "qcom,spmi-pmic";
|
|
reg = <0x3 SPMI_USID>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pm8280_2_temp_alarm: temp-alarm@a00 {
|
|
compatible = "qcom,spmi-temp-alarm";
|
|
reg = <0xa00>;
|
|
interrupts-extended = <&spmi_bus 0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
|
io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(3)>;
|
|
io-channel-names = "thermal";
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
pmc8280_2_gpios: gpio@8800 {
|
|
compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
|
|
reg = <0x8800>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pmc8280_2_gpios 0 0 10>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
pmr735a: pmic@4 {
|
|
compatible = "qcom,pmr735a", "qcom,spmi-pmic";
|
|
reg = <0x4 SPMI_USID>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pmr735a_temp_alarm: temp-alarm@a00 {
|
|
compatible = "qcom,spmi-temp-alarm";
|
|
reg = <0xa00>;
|
|
interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
|
|
io-channels = <&pmk8280_vadc PMR735A_ADC7_DIE_TEMP>;
|
|
io-channel-names = "thermal";
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
pmr735a_gpios: gpio@8800 {
|
|
compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
|
|
reg = <0x8800>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pmr735a_gpios 0 0 4>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
};
|