mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-31 22:23:05 +00:00
bf6ec39c3f
Add the IRIS video-codec node on QCS8300 platform to support video functionality. Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250501-qcs8300_iris-v7-4-b229d5347990@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
5645 lines
138 KiB
Plaintext
5645 lines
138 KiB
Plaintext
// SPDX-License-Identifier: BSD-3-Clause
|
|
/*
|
|
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/qcom,qcs8300-gcc.h>
|
|
#include <dt-bindings/clock/qcom,rpmh.h>
|
|
#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
|
|
#include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
|
|
#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
|
|
#include <dt-bindings/clock/qcom,sa8775p-videocc.h>
|
|
#include <dt-bindings/dma/qcom-gpi.h>
|
|
#include <dt-bindings/firmware/qcom,scm.h>
|
|
#include <dt-bindings/interconnect/qcom,icc.h>
|
|
#include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/mailbox/qcom-ipcc.h>
|
|
#include <dt-bindings/power/qcom,rpmhpd.h>
|
|
#include <dt-bindings/power/qcom-rpmpd.h>
|
|
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
|
|
|
|
/ {
|
|
interrupt-parent = <&intc>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
clocks {
|
|
xo_board_clk: xo-board-clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <38400000>;
|
|
};
|
|
|
|
sleep_clk: sleep-clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32000>;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a78c";
|
|
reg = <0x0 0x0>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2_0>;
|
|
power-domains = <&cpu_pd0>;
|
|
power-domain-names = "psci";
|
|
capacity-dmips-mhz = <1946>;
|
|
dynamic-power-coefficient = <472>;
|
|
qcom,freq-domain = <&cpufreq_hw 0>;
|
|
|
|
l2_0: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
next-level-cache = <&l3_0>;
|
|
};
|
|
};
|
|
|
|
cpu1: cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a78c";
|
|
reg = <0x0 0x100>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2_1>;
|
|
power-domains = <&cpu_pd1>;
|
|
power-domain-names = "psci";
|
|
capacity-dmips-mhz = <1946>;
|
|
dynamic-power-coefficient = <472>;
|
|
qcom,freq-domain = <&cpufreq_hw 0>;
|
|
|
|
l2_1: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
next-level-cache = <&l3_0>;
|
|
};
|
|
};
|
|
|
|
cpu2: cpu@200 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a78c";
|
|
reg = <0x0 0x200>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2_2>;
|
|
power-domains = <&cpu_pd2>;
|
|
power-domain-names = "psci";
|
|
capacity-dmips-mhz = <1946>;
|
|
dynamic-power-coefficient = <507>;
|
|
qcom,freq-domain = <&cpufreq_hw 2>;
|
|
|
|
l2_2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
next-level-cache = <&l3_0>;
|
|
};
|
|
};
|
|
|
|
cpu3: cpu@300 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a78c";
|
|
reg = <0x0 0x300>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2_3>;
|
|
power-domains = <&cpu_pd3>;
|
|
power-domain-names = "psci";
|
|
capacity-dmips-mhz = <1946>;
|
|
dynamic-power-coefficient = <507>;
|
|
qcom,freq-domain = <&cpufreq_hw 2>;
|
|
|
|
l2_3: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
next-level-cache = <&l3_0>;
|
|
};
|
|
};
|
|
|
|
cpu4: cpu@10000 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a55";
|
|
reg = <0x0 0x10000>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2_4>;
|
|
power-domains = <&cpu_pd4>;
|
|
power-domain-names = "psci";
|
|
capacity-dmips-mhz = <1024>;
|
|
dynamic-power-coefficient = <100>;
|
|
qcom,freq-domain = <&cpufreq_hw 1>;
|
|
|
|
l2_4: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
next-level-cache = <&l3_1>;
|
|
};
|
|
};
|
|
|
|
cpu5: cpu@10100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a55";
|
|
reg = <0x0 0x10100>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2_5>;
|
|
power-domains = <&cpu_pd5>;
|
|
power-domain-names = "psci";
|
|
capacity-dmips-mhz = <1024>;
|
|
dynamic-power-coefficient = <100>;
|
|
qcom,freq-domain = <&cpufreq_hw 1>;
|
|
|
|
l2_5: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
next-level-cache = <&l3_1>;
|
|
};
|
|
};
|
|
|
|
cpu6: cpu@10200 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a55";
|
|
reg = <0x0 0x10200>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2_6>;
|
|
power-domains = <&cpu_pd6>;
|
|
power-domain-names = "psci";
|
|
capacity-dmips-mhz = <1024>;
|
|
dynamic-power-coefficient = <100>;
|
|
qcom,freq-domain = <&cpufreq_hw 1>;
|
|
|
|
l2_6: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
next-level-cache = <&l3_1>;
|
|
};
|
|
};
|
|
|
|
cpu7: cpu@10300 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a55";
|
|
reg = <0x0 0x10300>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2_7>;
|
|
power-domains = <&cpu_pd7>;
|
|
power-domain-names = "psci";
|
|
capacity-dmips-mhz = <1024>;
|
|
dynamic-power-coefficient = <100>;
|
|
qcom,freq-domain = <&cpufreq_hw 1>;
|
|
|
|
l2_7: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
next-level-cache = <&l3_1>;
|
|
};
|
|
};
|
|
|
|
cpu-map {
|
|
cluster0 {
|
|
core0 {
|
|
cpu = <&cpu0>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&cpu1>;
|
|
};
|
|
|
|
core2 {
|
|
cpu = <&cpu2>;
|
|
};
|
|
|
|
core3 {
|
|
cpu = <&cpu3>;
|
|
};
|
|
};
|
|
|
|
cluster1 {
|
|
core0 {
|
|
cpu = <&cpu4>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&cpu5>;
|
|
};
|
|
|
|
core2 {
|
|
cpu = <&cpu6>;
|
|
};
|
|
|
|
core3 {
|
|
cpu = <&cpu7>;
|
|
};
|
|
};
|
|
};
|
|
|
|
l3_0: l3-cache-0 {
|
|
compatible = "cache";
|
|
cache-level = <3>;
|
|
cache-unified;
|
|
};
|
|
|
|
l3_1: l3-cache-1 {
|
|
compatible = "cache";
|
|
cache-level = <3>;
|
|
cache-unified;
|
|
};
|
|
|
|
idle-states {
|
|
entry-method = "psci";
|
|
|
|
little_cpu_sleep_0: cpu-sleep-0-0 {
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "silver-power-collapse";
|
|
arm,psci-suspend-param = <0x40000003>;
|
|
entry-latency-us = <449>;
|
|
exit-latency-us = <801>;
|
|
min-residency-us = <1574>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
little_cpu_sleep_1: cpu-sleep-0-1 {
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "silver-rail-power-collapse";
|
|
arm,psci-suspend-param = <0x40000004>;
|
|
entry-latency-us = <602>;
|
|
exit-latency-us = <961>;
|
|
min-residency-us = <4288>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
big_cpu_sleep_0: cpu-sleep-1-0 {
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "gold-power-collapse";
|
|
arm,psci-suspend-param = <0x40000003>;
|
|
entry-latency-us = <549>;
|
|
exit-latency-us = <901>;
|
|
min-residency-us = <1774>;
|
|
local-timer-stop;
|
|
};
|
|
|
|
big_cpu_sleep_1: cpu-sleep-1-1 {
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "gold-rail-power-collapse";
|
|
arm,psci-suspend-param = <0x40000004>;
|
|
entry-latency-us = <702>;
|
|
exit-latency-us = <1061>;
|
|
min-residency-us = <4488>;
|
|
local-timer-stop;
|
|
};
|
|
};
|
|
|
|
domain-idle-states {
|
|
silver_cluster_sleep: cluster-sleep-0 {
|
|
compatible = "domain-idle-state";
|
|
arm,psci-suspend-param = <0x41000044>;
|
|
entry-latency-us = <2552>;
|
|
exit-latency-us = <2848>;
|
|
min-residency-us = <5908>;
|
|
};
|
|
|
|
gold_cluster_sleep: cluster-sleep-1 {
|
|
compatible = "domain-idle-state";
|
|
arm,psci-suspend-param = <0x41000044>;
|
|
entry-latency-us = <2752>;
|
|
exit-latency-us = <3048>;
|
|
min-residency-us = <6118>;
|
|
};
|
|
|
|
system_sleep: domain-sleep {
|
|
compatible = "domain-idle-state";
|
|
arm,psci-suspend-param = <0x42000144>;
|
|
entry-latency-us = <3263>;
|
|
exit-latency-us = <6562>;
|
|
min-residency-us = <9987>;
|
|
};
|
|
};
|
|
};
|
|
|
|
dummy_eud: dummy-sink {
|
|
compatible = "arm,coresight-dummy-sink";
|
|
|
|
in-ports {
|
|
port {
|
|
eud_in: endpoint {
|
|
remote-endpoint = <&swao_rep_out1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
firmware {
|
|
scm: scm {
|
|
compatible = "qcom,scm-qcs8300", "qcom,scm";
|
|
qcom,dload-mode = <&tcsr 0x13000>;
|
|
};
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
/* We expect the bootloader to fill in the size */
|
|
reg = <0x0 0x80000000 0x0 0x0>;
|
|
};
|
|
|
|
clk_virt: interconnect-0 {
|
|
compatible = "qcom,qcs8300-clk-virt";
|
|
#interconnect-cells = <2>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
mc_virt: interconnect-1 {
|
|
compatible = "qcom,qcs8300-mc-virt";
|
|
#interconnect-cells = <2>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
qup_opp_table: opp-table-qup {
|
|
compatible = "operating-points-v2";
|
|
|
|
opp-120000000 {
|
|
opp-hz = /bits/ 64 <120000000>;
|
|
required-opps = <&rpmhpd_opp_svs_l1>;
|
|
};
|
|
};
|
|
|
|
pmu-a55 {
|
|
compatible = "arm,cortex-a55-pmu";
|
|
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
|
|
pmu-a78 {
|
|
compatible = "arm,cortex-a78-pmu";
|
|
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
|
|
cpu_pd0: power-domain-cpu0 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&cluster_pd0>;
|
|
domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
|
|
};
|
|
|
|
cpu_pd1: power-domain-cpu1 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&cluster_pd0>;
|
|
domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
|
|
};
|
|
|
|
cpu_pd2: power-domain-cpu2 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&cluster_pd0>;
|
|
domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
|
|
};
|
|
|
|
cpu_pd3: power-domain-cpu3 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&cluster_pd0>;
|
|
domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>;
|
|
};
|
|
|
|
cpu_pd4: power-domain-cpu4 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&cluster_pd1>;
|
|
domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
|
|
};
|
|
|
|
cpu_pd5: power-domain-cpu5 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&cluster_pd1>;
|
|
domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
|
|
};
|
|
|
|
cpu_pd6: power-domain-cpu6 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&cluster_pd1>;
|
|
domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
|
|
};
|
|
|
|
cpu_pd7: power-domain-cpu7 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&cluster_pd1>;
|
|
domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>;
|
|
};
|
|
|
|
cluster_pd0: power-domain-cluster0 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&system_pd>;
|
|
domain-idle-states = <&gold_cluster_sleep>;
|
|
};
|
|
|
|
cluster_pd1: power-domain-cluster1 {
|
|
#power-domain-cells = <0>;
|
|
power-domains = <&system_pd>;
|
|
domain-idle-states = <&silver_cluster_sleep>;
|
|
};
|
|
|
|
system_pd: power-domain-system {
|
|
#power-domain-cells = <0>;
|
|
domain-idle-states = <&system_sleep>;
|
|
};
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
aop_image_mem: aop-image-region@90800000 {
|
|
reg = <0x0 0x90800000 0x0 0x60000>;
|
|
no-map;
|
|
};
|
|
|
|
aop_cmd_db_mem: aop-cmd-db-region@90860000 {
|
|
compatible = "qcom,cmd-db";
|
|
reg = <0x0 0x90860000 0x0 0x20000>;
|
|
no-map;
|
|
};
|
|
|
|
smem_mem: smem@90900000 {
|
|
compatible = "qcom,smem";
|
|
reg = <0x0 0x90900000 0x0 0x200000>;
|
|
no-map;
|
|
hwlocks = <&tcsr_mutex 3>;
|
|
};
|
|
|
|
lpass_machine_learning_mem: lpass-machine-learning-region@93b00000 {
|
|
reg = <0x0 0x93b00000 0x0 0xf00000>;
|
|
no-map;
|
|
};
|
|
|
|
adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap-region@94a00000 {
|
|
reg = <0x0 0x94a00000 0x0 0x800000>;
|
|
no-map;
|
|
};
|
|
|
|
camera_mem: camera-region@95200000 {
|
|
reg = <0x0 0x95200000 0x0 0x500000>;
|
|
no-map;
|
|
};
|
|
|
|
adsp_mem: adsp-region@95c00000 {
|
|
no-map;
|
|
reg = <0x0 0x95c00000 0x0 0x1e00000>;
|
|
};
|
|
|
|
q6_adsp_dtb_mem: q6-adsp-dtb-region@97a00000 {
|
|
reg = <0x0 0x97a00000 0x0 0x80000>;
|
|
no-map;
|
|
};
|
|
|
|
q6_gpdsp_dtb_mem: q6-gpdsp-dtb-region@97a80000 {
|
|
reg = <0x0 0x97a80000 0x0 0x80000>;
|
|
no-map;
|
|
};
|
|
|
|
gpdsp_mem: gpdsp-region@97b00000 {
|
|
reg = <0x0 0x97b00000 0x0 0x1e00000>;
|
|
no-map;
|
|
};
|
|
|
|
q6_cdsp_dtb_mem: q6-cdsp-dtb-region@99900000 {
|
|
reg = <0x0 0x99900000 0x0 0x80000>;
|
|
no-map;
|
|
};
|
|
|
|
cdsp_mem: cdsp-region@99980000 {
|
|
reg = <0x0 0x99980000 0x0 0x1e00000>;
|
|
no-map;
|
|
};
|
|
|
|
gpu_microcode_mem: gpu-microcode-region@9b780000 {
|
|
reg = <0x0 0x9b780000 0x0 0x2000>;
|
|
no-map;
|
|
};
|
|
|
|
cvp_mem: cvp-region@9b782000 {
|
|
reg = <0x0 0x9b782000 0x0 0x700000>;
|
|
no-map;
|
|
};
|
|
|
|
video_mem: video-region@9be82000 {
|
|
reg = <0x0 0x9be82000 0x0 0x700000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
smp2p-adsp {
|
|
compatible = "qcom,smp2p";
|
|
interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
|
|
IPCC_MPROC_SIGNAL_SMP2P
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc IPCC_CLIENT_LPASS
|
|
IPCC_MPROC_SIGNAL_SMP2P>;
|
|
|
|
qcom,smem = <443>, <429>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <2>;
|
|
|
|
smp2p_adsp_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
smp2p_adsp_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
};
|
|
|
|
smp2p-cdsp {
|
|
compatible = "qcom,smp2p";
|
|
interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
|
|
IPCC_MPROC_SIGNAL_SMP2P
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc IPCC_CLIENT_CDSP
|
|
IPCC_MPROC_SIGNAL_SMP2P>;
|
|
|
|
qcom,smem = <94>, <432>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <5>;
|
|
|
|
smp2p_cdsp_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
smp2p_cdsp_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
};
|
|
|
|
smp2p-gpdsp {
|
|
compatible = "qcom,smp2p";
|
|
interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
|
|
IPCC_MPROC_SIGNAL_SMP2P
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc IPCC_CLIENT_GPDSP0
|
|
IPCC_MPROC_SIGNAL_SMP2P>;
|
|
|
|
qcom,smem = <617>, <616>;
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <17>;
|
|
|
|
smp2p_gpdsp_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
smp2p_gpdsp_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
};
|
|
|
|
soc: soc@0 {
|
|
compatible = "simple-bus";
|
|
ranges = <0 0 0 0 0x10 0>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
gcc: clock-controller@100000 {
|
|
compatible = "qcom,qcs8300-gcc";
|
|
reg = <0x0 0x00100000 0x0 0xc7018>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&sleep_clk>,
|
|
<0>,
|
|
<0>,
|
|
<0>,
|
|
<0>,
|
|
<0>,
|
|
<0>,
|
|
<0>,
|
|
<0>;
|
|
};
|
|
|
|
ipcc: mailbox@408000 {
|
|
compatible = "qcom,qcs8300-ipcc", "qcom,ipcc";
|
|
reg = <0x0 0x408000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
#mbox-cells = <2>;
|
|
};
|
|
|
|
qfprom: efuse@784000 {
|
|
compatible = "qcom,qcs8300-qfprom", "qcom,qfprom";
|
|
reg = <0x0 0x00784000 0x0 0x1200>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
|
|
gpi_dma0: dma-controller@900000 {
|
|
compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma";
|
|
reg = <0x0 0x900000 0x0 0x60000>;
|
|
#dma-cells = <3>;
|
|
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
|
|
iommus = <&apps_smmu 0x416 0x0>;
|
|
dma-channels = <12>;
|
|
dma-channel-mask = <0xfff>;
|
|
dma-coherent;
|
|
status = "disabled";
|
|
};
|
|
|
|
qupv3_id_0: geniqup@9c0000 {
|
|
compatible = "qcom,geni-se-qup";
|
|
reg = <0x0 0x9c0000 0x0 0x2000>;
|
|
ranges;
|
|
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
|
|
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
|
|
clock-names = "m-ahb",
|
|
"s-ahb";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
iommus = <&apps_smmu 0x403 0x0>;
|
|
dma-coherent;
|
|
status = "disabled";
|
|
|
|
i2c0: i2c@980000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0x980000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c0_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
|
|
<&gpi_dma0 1 0 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@980000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0x980000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
|
|
<&gpi_dma0 1 0 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@980000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0x980000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>,
|
|
<&qup_uart0_tx>, <&qup_uart0_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@984000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0x984000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c1_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
|
|
<&gpi_dma0 1 1 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@984000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0x984000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
|
|
<&gpi_dma0 1 1 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@984000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0x984000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>,
|
|
<&qup_uart1_tx>, <&qup_uart1_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@988000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0x988000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c2_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
|
|
<&gpi_dma0 1 2 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi2: spi@988000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0x988000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
|
|
<&gpi_dma0 1 2 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@988000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0x988000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>,
|
|
<&qup_uart2_tx>, <&qup_uart2_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@98c000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0x98c000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c3_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
|
|
<&gpi_dma0 1 3 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi3: spi@98c000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0x98c000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
|
|
<&gpi_dma0 1 3 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@98c000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0x98c000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>,
|
|
<&qup_uart3_tx>, <&qup_uart3_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@990000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0x990000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c4_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
|
|
<&gpi_dma0 1 4 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi4: spi@990000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0x990000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
|
|
<&gpi_dma0 1 4 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@990000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0x990000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>,
|
|
<&qup_uart4_tx>, <&qup_uart4_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c5: i2c@994000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0x994000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c5_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
|
|
<&gpi_dma0 1 5 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi5: spi@994000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0x994000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
|
|
<&gpi_dma0 1 5 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart5: serial@994000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0x994000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>,
|
|
<&qup_uart5_tx>, <&qup_uart5_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c6: i2c@998000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0x998000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c6_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
|
|
<&gpi_dma0 1 6 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi6: spi@998000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0x998000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
|
|
<&gpi_dma0 1 6 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart6: serial@998000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0x998000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>,
|
|
<&qup_uart6_tx>, <&qup_uart6_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart7: serial@99c000 {
|
|
compatible = "qcom,geni-debug-uart";
|
|
reg = <0x0 0x0099c000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gpi_dma1: dma-controller@a00000 {
|
|
compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma";
|
|
reg = <0x0 0xa00000 0x0 0x60000>;
|
|
#dma-cells = <3>;
|
|
interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
|
|
iommus = <&apps_smmu 0x456 0x0>;
|
|
dma-channels = <12>;
|
|
dma-channel-mask = <0xfff>;
|
|
dma-coherent;
|
|
status = "disabled";
|
|
};
|
|
|
|
qupv3_id_1: geniqup@ac0000 {
|
|
compatible = "qcom,geni-se-qup";
|
|
reg = <0x0 0xac0000 0x0 0x2000>;
|
|
ranges;
|
|
clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
|
|
<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
|
|
clock-names = "m-ahb",
|
|
"s-ahb";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
iommus = <&apps_smmu 0x443 0x0>;
|
|
dma-coherent;
|
|
status = "disabled";
|
|
|
|
i2c8: i2c@a80000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0xa80000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c8_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
|
|
<&gpi_dma1 1 0 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi8: spi@a80000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0xa80000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
|
|
<&gpi_dma1 1 0 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart8: serial@a80000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0xa80000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>,
|
|
<&qup_uart8_tx>, <&qup_uart8_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c9: i2c@a84000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0xa84000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c9_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
|
|
<&gpi_dma1 1 1 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi9: spi@a84000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0xa84000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
|
|
<&gpi_dma1 1 1 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart9: serial@a84000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0xa84000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>,
|
|
<&qup_uart9_tx>, <&qup_uart9_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c10: i2c@a88000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0xa88000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c10_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
|
|
<&gpi_dma1 1 2 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi10: spi@a88000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0xa88000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
|
|
<&gpi_dma1 1 2 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart10: serial@a88000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0xa88000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>,
|
|
<&qup_uart10_tx>, <&qup_uart10_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c11: i2c@a8c000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0xa8c000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c11_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
|
|
<&gpi_dma1 1 3 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart11: serial@a8c000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0xa8c000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart11_tx>, <&qup_uart11_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c12: i2c@a90000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0xa90000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c12_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
|
|
<&gpi_dma1 1 4 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi12: spi@a90000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0xa90000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
|
|
<&gpi_dma1 1 4 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart12: serial@a90000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0xa90000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>,
|
|
<&qup_uart12_tx>, <&qup_uart12_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c13: i2c@a94000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0xa94000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c13_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
|
|
<&gpi_dma1 1 5 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi13: spi@a94000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0xa94000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
|
|
<&gpi_dma1 1 5 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart13: serial@a94000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0xa94000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>,
|
|
<&qup_uart13_tx>, <&qup_uart13_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c14: i2c@a98000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0xa98000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c14_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
|
|
<&gpi_dma1 1 6 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi14: spi@a98000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0xa98000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
|
|
<&gpi_dma1 1 6 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart14: serial@a98000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0xa98000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>,
|
|
<&qup_uart14_tx>, <&qup_uart14_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c15: i2c@a9c000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0xa9c000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c15_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
|
|
<&gpi_dma1 1 7 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi15: spi@a9c000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0xa9c000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
|
|
<&gpi_dma1 1 7 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart15: serial@a9c000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0xa9c000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>,
|
|
<&qup_uart15_tx>, <&qup_uart15_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gpi_dma3: dma-controller@b00000 {
|
|
compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma";
|
|
reg = <0x0 0xb00000 0x0 0x60000>;
|
|
#dma-cells = <3>;
|
|
interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>;
|
|
iommus = <&apps_smmu 0x56 0x0>;
|
|
dma-channels = <4>;
|
|
dma-channel-mask = <0xf>;
|
|
dma-coherent;
|
|
status = "disabled";
|
|
};
|
|
|
|
qupv3_id_3: geniqup@bc0000 {
|
|
compatible = "qcom,geni-se-qup";
|
|
reg = <0x0 0xbc0000 0x0 0x2000>;
|
|
ranges;
|
|
clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>,
|
|
<&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>;
|
|
clock-names = "m-ahb",
|
|
"s-ahb";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
iommus = <&apps_smmu 0x43 0x0>;
|
|
dma-coherent;
|
|
status = "disabled";
|
|
|
|
i2c16: i2c@b80000 {
|
|
compatible = "qcom,geni-i2c";
|
|
reg = <0x0 0xb80000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_i2c16_data_clk>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 830 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>,
|
|
<&aggre2_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config",
|
|
"qup-memory";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
required-opps = <&rpmhpd_opp_low_svs>;
|
|
dmas = <&gpi_dma3 0 0 QCOM_GPI_I2C>,
|
|
<&gpi_dma3 1 0 QCOM_GPI_I2C>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi16: spi@b80000 {
|
|
compatible = "qcom,geni-spi";
|
|
reg = <0x0 0xb80000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 830 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
dmas = <&gpi_dma3 0 0 QCOM_GPI_SPI>,
|
|
<&gpi_dma3 1 0 QCOM_GPI_SPI>;
|
|
dma-names = "tx",
|
|
"rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart16: serial@b80000 {
|
|
compatible = "qcom,geni-uart";
|
|
reg = <0x0 0xb80000 0x0 0x4000>;
|
|
clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>;
|
|
clock-names = "se";
|
|
pinctrl-0 = <&qup_uart16_cts>, <&qup_uart16_rts>,
|
|
<&qup_uart16_tx>, <&qup_uart16_rx>;
|
|
pinctrl-names = "default";
|
|
interrupts = <GIC_SPI 830 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS
|
|
&clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "qup-core",
|
|
"qup-config";
|
|
power-domains = <&rpmhpd RPMHPD_CX>;
|
|
operating-points-v2 = <&qup_opp_table>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
rng: rng@10d2000 {
|
|
compatible = "qcom,qcs8300-trng", "qcom,trng";
|
|
reg = <0x0 0x010d2000 0x0 0x1000>;
|
|
};
|
|
|
|
config_noc: interconnect@14c0000 {
|
|
compatible = "qcom,qcs8300-config-noc";
|
|
reg = <0x0 0x014c0000 0x0 0x13080>;
|
|
#interconnect-cells = <2>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
system_noc: interconnect@1680000 {
|
|
compatible = "qcom,qcs8300-system-noc";
|
|
reg = <0x0 0x01680000 0x0 0x15080>;
|
|
#interconnect-cells = <2>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
aggre1_noc: interconnect@16c0000 {
|
|
compatible = "qcom,qcs8300-aggre1-noc";
|
|
reg = <0x0 0x016c0000 0x0 0x17080>;
|
|
#interconnect-cells = <2>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
aggre2_noc: interconnect@1700000 {
|
|
compatible = "qcom,qcs8300-aggre2-noc";
|
|
reg = <0x0 0x01700000 0x0 0x1a080>;
|
|
#interconnect-cells = <2>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
pcie_anoc: interconnect@1760000 {
|
|
compatible = "qcom,qcs8300-pcie-anoc";
|
|
reg = <0x0 0x01760000 0x0 0xc080>;
|
|
#interconnect-cells = <2>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
gpdsp_anoc: interconnect@1780000 {
|
|
compatible = "qcom,qcs8300-gpdsp-anoc";
|
|
reg = <0x0 0x01780000 0x0 0xd080>;
|
|
#interconnect-cells = <2>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
mmss_noc: interconnect@17a0000 {
|
|
compatible = "qcom,qcs8300-mmss-noc";
|
|
reg = <0x0 0x017a0000 0x0 0x40000>;
|
|
#interconnect-cells = <2>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
ufs_mem_hc: ufs@1d84000 {
|
|
compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
|
|
reg = <0x0 0x01d84000 0x0 0x3000>;
|
|
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
|
|
phys = <&ufs_mem_phy>;
|
|
phy-names = "ufsphy";
|
|
lanes-per-direction = <2>;
|
|
#reset-cells = <1>;
|
|
resets = <&gcc GCC_UFS_PHY_BCR>;
|
|
reset-names = "rst";
|
|
|
|
power-domains = <&gcc GCC_UFS_PHY_GDSC>;
|
|
required-opps = <&rpmhpd_opp_nom>;
|
|
|
|
iommus = <&apps_smmu 0x100 0x0>;
|
|
dma-coherent;
|
|
|
|
interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "ufs-ddr",
|
|
"cpu-ufs";
|
|
|
|
clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
|
|
<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
|
|
<&gcc GCC_UFS_PHY_AHB_CLK>,
|
|
<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
|
|
<&rpmhcc RPMH_CXO_CLK>,
|
|
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
|
|
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
|
|
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
|
|
clock-names = "core_clk",
|
|
"bus_aggr_clk",
|
|
"iface_clk",
|
|
"core_clk_unipro",
|
|
"ref_clk",
|
|
"tx_lane0_sync_clk",
|
|
"rx_lane0_sync_clk",
|
|
"rx_lane1_sync_clk";
|
|
freq-table-hz = <75000000 300000000>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<75000000 300000000>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<0 0>,
|
|
<0 0>;
|
|
qcom,ice = <&ice>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ufs_mem_phy: phy@1d87000 {
|
|
compatible = "qcom,qcs8300-qmp-ufs-phy", "qcom,sa8775p-qmp-ufs-phy";
|
|
reg = <0x0 0x01d87000 0x0 0xe10>;
|
|
/*
|
|
* Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It
|
|
* enables the CXO clock to eDP *and* UFS PHY.
|
|
*/
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
|
|
<&gcc GCC_EDP_REF_CLKREF_EN>;
|
|
clock-names = "ref",
|
|
"ref_aux",
|
|
"qref";
|
|
power-domains = <&gcc GCC_UFS_PHY_GDSC>;
|
|
|
|
resets = <&ufs_mem_hc 0>;
|
|
reset-names = "ufsphy";
|
|
|
|
#phy-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
cryptobam: dma-controller@1dc4000 {
|
|
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
|
|
reg = <0x0 0x01dc4000 0x0 0x28000>;
|
|
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
qcom,controlled-remotely;
|
|
num-channels = <20>;
|
|
qcom,num-ees = <4>;
|
|
iommus = <&apps_smmu 0x480 0x00>,
|
|
<&apps_smmu 0x481 0x00>;
|
|
};
|
|
|
|
ice: crypto@1d88000 {
|
|
compatible = "qcom,qcs8300-inline-crypto-engine",
|
|
"qcom,inline-crypto-engine";
|
|
reg = <0x0 0x01d88000 0x0 0x18000>;
|
|
clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
|
|
};
|
|
|
|
tcsr_mutex: hwlock@1f40000 {
|
|
compatible = "qcom,tcsr-mutex";
|
|
reg = <0x0 0x01f40000 0x0 0x20000>;
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
tcsr: syscon@1fc0000 {
|
|
compatible = "qcom,qcs8300-tcsr", "syscon";
|
|
reg = <0x0 0x1fc0000 0x0 0x30000>;
|
|
};
|
|
|
|
remoteproc_adsp: remoteproc@3000000 {
|
|
compatible = "qcom,qcs8300-adsp-pas", "qcom,sa8775p-adsp-pas";
|
|
reg = <0x0 0x3000000 0x0 0x00100>;
|
|
|
|
interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
|
|
<&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
|
|
<&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
|
|
<&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
|
|
<&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "wdog",
|
|
"fatal",
|
|
"ready",
|
|
"handover",
|
|
"stop-ack";
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
clock-names = "xo";
|
|
|
|
power-domains = <&rpmhpd RPMHPD_LCX>,
|
|
<&rpmhpd RPMHPD_LMX>;
|
|
power-domain-names = "lcx",
|
|
"lmx";
|
|
|
|
memory-region = <&adsp_mem>;
|
|
|
|
qcom,qmp = <&aoss_qmp>;
|
|
|
|
qcom,smem-states = <&smp2p_adsp_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
|
|
status = "disabled";
|
|
|
|
remoteproc_adsp_glink: glink-edge {
|
|
interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc IPCC_CLIENT_LPASS
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP>;
|
|
|
|
label = "lpass";
|
|
qcom,remote-pid = <2>;
|
|
|
|
fastrpc {
|
|
compatible = "qcom,fastrpc";
|
|
qcom,glink-channels = "fastrpcglink-apps-dsp";
|
|
label = "adsp";
|
|
memory-region = <&adsp_rpc_remote_heap_mem>;
|
|
qcom,vmids = <QCOM_SCM_VMID_LPASS
|
|
QCOM_SCM_VMID_ADSP_HEAP>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
compute-cb@3 {
|
|
compatible = "qcom,fastrpc-compute-cb";
|
|
reg = <3>;
|
|
iommus = <&apps_smmu 0x2003 0x0>;
|
|
dma-coherent;
|
|
};
|
|
|
|
compute-cb@4 {
|
|
compatible = "qcom,fastrpc-compute-cb";
|
|
reg = <4>;
|
|
iommus = <&apps_smmu 0x2004 0x0>;
|
|
dma-coherent;
|
|
};
|
|
|
|
compute-cb@5 {
|
|
compatible = "qcom,fastrpc-compute-cb";
|
|
reg = <5>;
|
|
iommus = <&apps_smmu 0x2005 0x0>;
|
|
dma-coherent;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
lpass_ag_noc: interconnect@3c40000 {
|
|
compatible = "qcom,qcs8300-lpass-ag-noc";
|
|
reg = <0x0 0x03c40000 0x0 0x17200>;
|
|
#interconnect-cells = <2>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
stm@4002000 {
|
|
compatible = "arm,coresight-stm", "arm,primecell";
|
|
reg = <0x0 0x04002000 0x0 0x1000>,
|
|
<0x0 0x16280000 0x0 0x180000>;
|
|
reg-names = "stm-base",
|
|
"stm-stimulus-base";
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
out-ports {
|
|
port {
|
|
stm_out: endpoint {
|
|
remote-endpoint = <&funnel0_in7>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpda@4004000 {
|
|
compatible = "qcom,coresight-tpda", "arm,primecell";
|
|
reg = <0x0 0x04004000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
qdss_tpda_in1: endpoint {
|
|
remote-endpoint = <&qdss_tpdm1_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
qdss_tpda_out: endpoint {
|
|
remote-endpoint = <&funnel0_in6>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@400f000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x0400f000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,cmb-element-bits = <32>;
|
|
qcom,cmb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
qdss_tpdm1_out: endpoint {
|
|
remote-endpoint = <&qdss_tpda_in1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@4041000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x04041000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
|
|
funnel0_in6: endpoint {
|
|
remote-endpoint = <&qdss_tpda_out>;
|
|
};
|
|
};
|
|
|
|
port@7 {
|
|
reg = <7>;
|
|
|
|
funnel0_in7: endpoint {
|
|
remote-endpoint = <&stm_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
funnel0_out: endpoint {
|
|
remote-endpoint = <&qdss_funnel_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@4042000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x04042000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
|
|
funnel1_in4: endpoint {
|
|
remote-endpoint = <&apss_funnel1_out>;
|
|
};
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
|
|
funnel1_in5: endpoint {
|
|
remote-endpoint = <&dlct0_funnel_out>;
|
|
};
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
|
|
funnel1_in6: endpoint {
|
|
remote-endpoint = <&dlmm_funnel_out>;
|
|
};
|
|
};
|
|
|
|
port@7 {
|
|
reg = <7>;
|
|
|
|
funnel1_in7: endpoint {
|
|
remote-endpoint = <&dlst_ch_funnel_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
funnel1_out: endpoint {
|
|
remote-endpoint = <&qdss_funnel_in1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@4045000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x04045000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
qdss_funnel_in0: endpoint {
|
|
remote-endpoint = <&funnel0_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
qdss_funnel_in1: endpoint {
|
|
remote-endpoint = <&funnel1_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
qdss_funnel_out: endpoint {
|
|
remote-endpoint = <&aoss_funnel_in7>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4841000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04841000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,cmb-element-bits = <32>;
|
|
qcom,cmb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
prng_tpdm_out: endpoint {
|
|
remote-endpoint = <&dlct0_tpda_in19>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4850000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04850000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,cmb-element-bits = <64>;
|
|
qcom,cmb-msrs-num = <32>;
|
|
qcom,dsb-element-bits = <32>;
|
|
qcom,dsb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
pimem_tpdm_out: endpoint {
|
|
remote-endpoint = <&dlct0_tpda_in25>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4860000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04860000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,dsb-element-bits = <32>;
|
|
qcom,dsb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
dlst_ch_tpdm0_out: endpoint {
|
|
remote-endpoint = <&dlst_ch_tpda_in8>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpda@4864000 {
|
|
compatible = "qcom,coresight-tpda", "arm,primecell";
|
|
reg = <0x0 0x04864000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@8 {
|
|
reg = <8>;
|
|
|
|
dlst_ch_tpda_in8: endpoint {
|
|
remote-endpoint = <&dlst_ch_tpdm0_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
dlst_ch_tpda_out: endpoint {
|
|
remote-endpoint = <&dlst_ch_funnel_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@4865000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x04865000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
dlst_ch_funnel_in0: endpoint {
|
|
remote-endpoint = <&dlst_ch_tpda_out>;
|
|
};
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
|
|
dlst_ch_funnel_in4: endpoint {
|
|
remote-endpoint = <&dlst_funnel_out>;
|
|
};
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
|
|
dlst_ch_funnel_in6: endpoint {
|
|
remote-endpoint = <&gdsp_funnel_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
dlst_ch_funnel_out: endpoint {
|
|
remote-endpoint = <&funnel1_in7>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4980000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04980000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,dsb-element-bits = <32>;
|
|
qcom,dsb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
turing2_tpdm_out: endpoint {
|
|
remote-endpoint = <&turing2_funnel_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@4983000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x04983000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
port {
|
|
turing2_funnel_in0: endpoint {
|
|
remote-endpoint = <&turing2_tpdm_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
turing2_funnel_out0: endpoint {
|
|
remote-endpoint = <&gdsp_tpda_in5>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4ac0000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04ac0000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,dsb-element-bits = <32>;
|
|
qcom,dsb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
dlmm_tpdm0_out: endpoint {
|
|
remote-endpoint = <&dlmm_tpda_in27>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpda@4ac4000 {
|
|
compatible = "qcom,coresight-tpda", "arm,primecell";
|
|
reg = <0x0 0x04ac4000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1b {
|
|
reg = <27>;
|
|
|
|
dlmm_tpda_in27: endpoint {
|
|
remote-endpoint = <&dlmm_tpdm0_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
dlmm_tpda_out: endpoint {
|
|
remote-endpoint = <&dlmm_funnel_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@4ac5000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x04ac5000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
port {
|
|
dlmm_funnel_in0: endpoint {
|
|
remote-endpoint = <&dlmm_tpda_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
dlmm_funnel_out: endpoint {
|
|
remote-endpoint = <&funnel1_in6>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4ad0000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04ad0000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,dsb-element-bits = <32>;
|
|
qcom,dsb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
dlct0_tpdm0_out: endpoint {
|
|
remote-endpoint = <&dlct0_tpda_in26>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpda@4ad3000 {
|
|
compatible = "qcom,coresight-tpda", "arm,primecell";
|
|
reg = <0x0 0x04ad3000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@13 {
|
|
reg = <19>;
|
|
|
|
dlct0_tpda_in19: endpoint {
|
|
remote-endpoint = <&prng_tpdm_out>;
|
|
};
|
|
};
|
|
|
|
port@19 {
|
|
reg = <25>;
|
|
|
|
dlct0_tpda_in25: endpoint {
|
|
remote-endpoint = <&pimem_tpdm_out>;
|
|
};
|
|
};
|
|
|
|
port@1a {
|
|
reg = <26>;
|
|
|
|
dlct0_tpda_in26: endpoint {
|
|
remote-endpoint = <&dlct0_tpdm0_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
dlct0_tpda_out: endpoint {
|
|
remote-endpoint = <&dlct0_funnel_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@4ad4000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x04ad4000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
dlct0_funnel_in0: endpoint {
|
|
remote-endpoint = <&dlct0_tpda_out>;
|
|
};
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
|
|
dlct0_funnel_in4: endpoint {
|
|
remote-endpoint = <&ddr_funnel5_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
dlct0_funnel_out: endpoint {
|
|
remote-endpoint = <&funnel1_in5>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@4b04000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x04b04000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
|
|
aoss_funnel_in6: endpoint {
|
|
remote-endpoint = <&aoss_tpda_out>;
|
|
};
|
|
};
|
|
|
|
port@7 {
|
|
reg = <7>;
|
|
|
|
aoss_funnel_in7: endpoint {
|
|
remote-endpoint = <&qdss_funnel_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
aoss_funnel_out: endpoint {
|
|
remote-endpoint = <&etf0_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tmc_etf: tmc@4b05000 {
|
|
compatible = "arm,coresight-tmc", "arm,primecell";
|
|
reg = <0x0 0x04b05000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
port {
|
|
etf0_in: endpoint {
|
|
remote-endpoint = <&aoss_funnel_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
etf0_out: endpoint {
|
|
remote-endpoint = <&swao_rep_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
replicator@4b06000 {
|
|
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
|
|
reg = <0x0 0x04b06000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
port {
|
|
swao_rep_in: endpoint {
|
|
remote-endpoint = <&etf0_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
swao_rep_out1: endpoint {
|
|
remote-endpoint = <&eud_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpda@4b08000 {
|
|
compatible = "qcom,coresight-tpda", "arm,primecell";
|
|
reg = <0x0 0x04b08000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
aoss_tpda_in0: endpoint {
|
|
remote-endpoint = <&aoss_tpdm0_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
aoss_tpda_in1: endpoint {
|
|
remote-endpoint = <&aoss_tpdm1_out>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
|
|
aoss_tpda_in2: endpoint {
|
|
remote-endpoint = <&aoss_tpdm2_out>;
|
|
};
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
|
|
aoss_tpda_in3: endpoint {
|
|
remote-endpoint = <&aoss_tpdm3_out>;
|
|
};
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
|
|
aoss_tpda_in4: endpoint {
|
|
remote-endpoint = <&aoss_tpdm4_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
aoss_tpda_out: endpoint {
|
|
remote-endpoint = <&aoss_funnel_in6>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4b09000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04b09000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,cmb-element-bits = <64>;
|
|
qcom,cmb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
aoss_tpdm0_out: endpoint {
|
|
remote-endpoint = <&aoss_tpda_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4b0a000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04b0a000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,cmb-element-bits = <64>;
|
|
qcom,cmb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
aoss_tpdm1_out: endpoint {
|
|
remote-endpoint = <&aoss_tpda_in1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4b0b000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04b0b000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,cmb-element-bits = <64>;
|
|
qcom,cmb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
aoss_tpdm2_out: endpoint {
|
|
remote-endpoint = <&aoss_tpda_in2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4b0c000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04b0c000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,cmb-element-bits = <64>;
|
|
qcom,cmb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
aoss_tpdm3_out: endpoint {
|
|
remote-endpoint = <&aoss_tpda_in3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4b0d000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04b0d000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,dsb-element-bits = <32>;
|
|
qcom,dsb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
aoss_tpdm4_out: endpoint {
|
|
remote-endpoint = <&aoss_tpda_in4>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
cti@4b13000 {
|
|
compatible = "arm,coresight-cti", "arm,primecell";
|
|
reg = <0x0 0x04b13000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
tpdm@4b80000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04b80000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,dsb-element-bits = <32>;
|
|
qcom,dsb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
turing0_tpdm0_out: endpoint {
|
|
remote-endpoint = <&turing0_tpda_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpda@4b86000 {
|
|
compatible = "qcom,coresight-tpda", "arm,primecell";
|
|
reg = <0x0 0x04b86000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
port {
|
|
turing0_tpda_in0: endpoint {
|
|
remote-endpoint = <&turing0_tpdm0_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
turing0_tpda_out: endpoint {
|
|
remote-endpoint = <&turing0_funnel_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@4b87000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x04b87000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
port {
|
|
turing0_funnel_in0: endpoint {
|
|
remote-endpoint = <&turing0_tpda_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
turing0_funnel_out: endpoint {
|
|
remote-endpoint = <&gdsp_funnel_in4>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
cti@4b8b000 {
|
|
compatible = "arm,coresight-cti", "arm,primecell";
|
|
reg = <0x0 0x04b8b000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
tpdm@4c40000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04c40000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,dsb-element-bits = <32>;
|
|
qcom,dsb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
gdsp_tpdm0_out: endpoint {
|
|
remote-endpoint = <&gdsp_tpda_in8>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpda@4c44000 {
|
|
compatible = "qcom,coresight-tpda", "arm,primecell";
|
|
reg = <0x0 0x04c44000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
|
|
gdsp_tpda_in5: endpoint {
|
|
remote-endpoint = <&turing2_funnel_out0>;
|
|
};
|
|
};
|
|
|
|
port@8 {
|
|
reg = <8>;
|
|
|
|
gdsp_tpda_in8: endpoint {
|
|
remote-endpoint = <&gdsp_tpdm0_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
gdsp_tpda_out: endpoint {
|
|
remote-endpoint = <&gdsp_funnel_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@4c45000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x04c45000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
gdsp_funnel_in0: endpoint {
|
|
remote-endpoint = <&gdsp_tpda_out>;
|
|
};
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
|
|
gdsp_funnel_in4: endpoint {
|
|
remote-endpoint = <&turing0_funnel_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
gdsp_funnel_out: endpoint {
|
|
remote-endpoint = <&dlst_ch_funnel_in6>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4c50000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04c50000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,dsb-element-bits = <32>;
|
|
qcom,dsb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
dlst_tpdm0_out: endpoint {
|
|
remote-endpoint = <&dlst_tpda_in8>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpda@4c54000 {
|
|
compatible = "qcom,coresight-tpda", "arm,primecell";
|
|
reg = <0x0 0x04c54000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@8 {
|
|
reg = <8>;
|
|
|
|
dlst_tpda_in8: endpoint {
|
|
remote-endpoint = <&dlst_tpdm0_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
dlst_tpda_out: endpoint {
|
|
remote-endpoint = <&dlst_funnel_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@4c55000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x04c55000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
port {
|
|
dlst_funnel_in0: endpoint {
|
|
remote-endpoint = <&dlst_tpda_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
dlst_funnel_out: endpoint {
|
|
remote-endpoint = <&dlst_ch_funnel_in4>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4e00000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04e00000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,dsb-element-bits = <32>;
|
|
qcom,dsb-msrs-num = <32>;
|
|
qcom,cmb-element-bits = <32>;
|
|
qcom,cmb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
ddr_tpdm3_out: endpoint {
|
|
remote-endpoint = <&ddr_tpda_in4>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpda@4e03000 {
|
|
compatible = "qcom,coresight-tpda", "arm,primecell";
|
|
reg = <0x0 0x04e03000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
ddr_tpda_in0: endpoint {
|
|
remote-endpoint = <&ddr_funnel0_out0>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
ddr_tpda_in1: endpoint {
|
|
remote-endpoint = <&ddr_funnel1_out0>;
|
|
};
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
|
|
ddr_tpda_in4: endpoint {
|
|
remote-endpoint = <&ddr_tpdm3_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
ddr_tpda_out: endpoint {
|
|
remote-endpoint = <&ddr_funnel5_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@4e04000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x04e04000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
port {
|
|
ddr_funnel5_in0: endpoint {
|
|
remote-endpoint = <&ddr_tpda_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
ddr_funnel5_out: endpoint {
|
|
remote-endpoint = <&dlct0_funnel_in4>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4e10000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04e10000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,dsb-element-bits = <32>;
|
|
qcom,dsb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
ddr_tpdm0_out: endpoint {
|
|
remote-endpoint = <&ddr_funnel0_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@4e12000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x04e12000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
port {
|
|
ddr_funnel0_in0: endpoint {
|
|
remote-endpoint = <&ddr_tpdm0_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
ddr_funnel0_out0: endpoint {
|
|
remote-endpoint = <&ddr_tpda_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@4e20000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x04e20000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,dsb-element-bits = <32>;
|
|
qcom,dsb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
ddr_tpdm1_out: endpoint {
|
|
remote-endpoint = <&ddr_funnel1_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@4e22000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x04e22000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
port {
|
|
ddr_funnel1_in0: endpoint {
|
|
remote-endpoint = <&ddr_tpdm1_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
ddr_funnel1_out0: endpoint {
|
|
remote-endpoint = <&ddr_tpda_in1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@6040000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x0 0x06040000 0x0 0x1000>;
|
|
cpu = <&cpu0>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
arm,coresight-loses-context-with-cpu;
|
|
qcom,skip-power-up;
|
|
|
|
out-ports {
|
|
port {
|
|
etm0_out: endpoint {
|
|
remote-endpoint = <&apss_funnel0_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@6140000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x0 0x06140000 0x0 0x1000>;
|
|
cpu = <&cpu1>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
arm,coresight-loses-context-with-cpu;
|
|
qcom,skip-power-up;
|
|
|
|
out-ports {
|
|
port {
|
|
etm1_out: endpoint {
|
|
remote-endpoint = <&apss_funnel0_in1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@6240000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x0 0x06240000 0x0 0x1000>;
|
|
cpu = <&cpu2>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
arm,coresight-loses-context-with-cpu;
|
|
qcom,skip-power-up;
|
|
|
|
out-ports {
|
|
port {
|
|
etm2_out: endpoint {
|
|
remote-endpoint = <&apss_funnel0_in2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@6340000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x0 0x06340000 0x0 0x1000>;
|
|
cpu = <&cpu3>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
arm,coresight-loses-context-with-cpu;
|
|
qcom,skip-power-up;
|
|
|
|
out-ports {
|
|
port {
|
|
etm3_out: endpoint {
|
|
remote-endpoint = <&apss_funnel0_in3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@6440000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x0 0x06440000 0x0 0x1000>;
|
|
cpu = <&cpu4>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
arm,coresight-loses-context-with-cpu;
|
|
qcom,skip-power-up;
|
|
|
|
out-ports {
|
|
port {
|
|
etm4_out: endpoint {
|
|
remote-endpoint = <&apss_funnel0_in4>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@6540000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x0 0x06540000 0x0 0x1000>;
|
|
cpu = <&cpu5>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
arm,coresight-loses-context-with-cpu;
|
|
qcom,skip-power-up;
|
|
|
|
out-ports {
|
|
port {
|
|
etm5_out: endpoint {
|
|
remote-endpoint = <&apss_funnel0_in5>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@6640000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x0 0x06640000 0x0 0x1000>;
|
|
cpu = <&cpu6>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
arm,coresight-loses-context-with-cpu;
|
|
qcom,skip-power-up;
|
|
|
|
out-ports {
|
|
port {
|
|
etm6_out: endpoint {
|
|
remote-endpoint = <&apss_funnel0_in6>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@6740000 {
|
|
compatible = "arm,primecell";
|
|
reg = <0x0 0x06740000 0x0 0x1000>;
|
|
cpu = <&cpu7>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
arm,coresight-loses-context-with-cpu;
|
|
qcom,skip-power-up;
|
|
|
|
out-ports {
|
|
port {
|
|
etm7_out: endpoint {
|
|
remote-endpoint = <&apss_funnel0_in7>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@6800000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x06800000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
apss_funnel0_in0: endpoint {
|
|
remote-endpoint = <&etm0_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
apss_funnel0_in1: endpoint {
|
|
remote-endpoint = <&etm1_out>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
|
|
apss_funnel0_in2: endpoint {
|
|
remote-endpoint = <&etm2_out>;
|
|
};
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
|
|
apss_funnel0_in3: endpoint {
|
|
remote-endpoint = <&etm3_out>;
|
|
};
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
|
|
apss_funnel0_in4: endpoint {
|
|
remote-endpoint = <&etm4_out>;
|
|
};
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
|
|
apss_funnel0_in5: endpoint {
|
|
remote-endpoint = <&etm5_out>;
|
|
};
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
|
|
apss_funnel0_in6: endpoint {
|
|
remote-endpoint = <&etm6_out>;
|
|
};
|
|
};
|
|
|
|
port@7 {
|
|
reg = <7>;
|
|
|
|
apss_funnel0_in7: endpoint {
|
|
remote-endpoint = <&etm7_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
apss_funnel0_out: endpoint {
|
|
remote-endpoint = <&apss_funnel1_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@6810000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0x0 0x06810000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
apss_funnel1_in0: endpoint {
|
|
remote-endpoint = <&apss_funnel0_out>;
|
|
};
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
|
|
apss_funnel1_in3: endpoint {
|
|
remote-endpoint = <&apss_tpda_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
apss_funnel1_out: endpoint {
|
|
remote-endpoint = <&funnel1_in4>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
cti@682b000 {
|
|
compatible = "arm,coresight-cti", "arm,primecell";
|
|
reg = <0x0 0x0682b000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
tpdm@6860000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x06860000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,cmb-element-bits = <64>;
|
|
qcom,cmb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
apss_tpdm3_out: endpoint {
|
|
remote-endpoint = <&apss_tpda_in3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@6861000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x06861000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,dsb-element-bits = <32>;
|
|
qcom,dsb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
apss_tpdm4_out: endpoint {
|
|
remote-endpoint = <&apss_tpda_in4>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpda@6863000 {
|
|
compatible = "qcom,coresight-tpda", "arm,primecell";
|
|
reg = <0x0 0x06863000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
apss_tpda_in0: endpoint {
|
|
remote-endpoint = <&apss_tpdm0_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
apss_tpda_in1: endpoint {
|
|
remote-endpoint = <&apss_tpdm1_out>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
|
|
apss_tpda_in2: endpoint {
|
|
remote-endpoint = <&apss_tpdm2_out>;
|
|
};
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
|
|
apss_tpda_in3: endpoint {
|
|
remote-endpoint = <&apss_tpdm3_out>;
|
|
};
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
|
|
apss_tpda_in4: endpoint {
|
|
remote-endpoint = <&apss_tpdm4_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
apss_tpda_out: endpoint {
|
|
remote-endpoint = <&apss_funnel1_in3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@68a0000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x068a0000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,cmb-element-bits = <32>;
|
|
qcom,cmb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
apss_tpdm1_out: endpoint {
|
|
remote-endpoint = <&apss_tpda_in1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@68b0000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x068b0000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,cmb-element-bits = <32>;
|
|
qcom,cmb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
apss_tpdm0_out: endpoint {
|
|
remote-endpoint = <&apss_tpda_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpdm@68c0000 {
|
|
compatible = "qcom,coresight-tpdm", "arm,primecell";
|
|
reg = <0x0 0x068c0000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
|
|
qcom,dsb-element-bits = <32>;
|
|
qcom,dsb-msrs-num = <32>;
|
|
|
|
out-ports {
|
|
port {
|
|
apss_tpdm2_out: endpoint {
|
|
remote-endpoint = <&apss_tpda_in2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
cti@68e0000 {
|
|
compatible = "arm,coresight-cti", "arm,primecell";
|
|
reg = <0x0 0x068e0000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
cti@68f0000 {
|
|
compatible = "arm,coresight-cti", "arm,primecell";
|
|
reg = <0x0 0x068f0000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
cti@6900000 {
|
|
compatible = "arm,coresight-cti", "arm,primecell";
|
|
reg = <0x0 0x06900000 0x0 0x1000>;
|
|
|
|
clocks = <&aoss_qmp>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
usb_1_hsphy: phy@8904000 {
|
|
compatible = "qcom,qcs8300-usb-hs-phy",
|
|
"qcom,usb-snps-hs-7nm-phy";
|
|
reg = <0x0 0x08904000 0x0 0x400>;
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
clock-names = "ref";
|
|
|
|
resets = <&gcc GCC_USB2_PHY_PRIM_BCR>;
|
|
|
|
#phy-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_2_hsphy: phy@8906000 {
|
|
compatible = "qcom,qcs8300-usb-hs-phy",
|
|
"qcom,usb-snps-hs-7nm-phy";
|
|
reg = <0x0 0x08906000 0x0 0x400>;
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
clock-names = "ref";
|
|
|
|
resets = <&gcc GCC_USB2_PHY_SEC_BCR>;
|
|
|
|
#phy-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_qmpphy: phy@8907000 {
|
|
compatible = "qcom,qcs8300-qmp-usb3-uni-phy";
|
|
reg = <0x0 0x08907000 0x0 0x2000>;
|
|
|
|
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
|
|
<&gcc GCC_USB_CLKREF_EN>,
|
|
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
|
|
<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
|
|
clock-names = "aux",
|
|
"ref",
|
|
"com_aux",
|
|
"pipe";
|
|
|
|
resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
|
|
<&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
|
|
reset-names = "phy", "phy_phy";
|
|
|
|
power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
|
|
|
|
#clock-cells = <0>;
|
|
clock-output-names = "usb3_prim_phy_pipe_clk_src";
|
|
|
|
#phy-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
serdes0: phy@8909000 {
|
|
compatible = "qcom,qcs8300-dwmac-sgmii-phy", "qcom,sa8775p-dwmac-sgmii-phy";
|
|
reg = <0x0 0x08909000 0x0 0x00000e10>;
|
|
clocks = <&gcc GCC_SGMI_CLKREF_EN>;
|
|
clock-names = "sgmi_ref";
|
|
#phy-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpucc: clock-controller@3d90000 {
|
|
compatible = "qcom,qcs8300-gpucc";
|
|
reg = <0x0 0x03d90000 0x0 0xa000>;
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>,
|
|
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
|
|
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
|
|
clock-names = "bi_tcxo",
|
|
"gcc_gpu_gpll0_clk_src",
|
|
"gcc_gpu_gpll0_div_clk_src";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
};
|
|
|
|
adreno_smmu: iommu@3da0000 {
|
|
compatible = "qcom,qcs8300-smmu-500", "qcom,adreno-smmu",
|
|
"qcom,smmu-500", "arm,mmu-500";
|
|
reg = <0x0 0x3da0000 0x0 0x20000>;
|
|
#iommu-cells = <2>;
|
|
#global-interrupts = <2>;
|
|
|
|
interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
|
|
<&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
|
|
<&gpucc GPU_CC_AHB_CLK>,
|
|
<&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
|
|
<&gpucc GPU_CC_CX_GMU_CLK>,
|
|
<&gpucc GPU_CC_HUB_CX_INT_CLK>,
|
|
<&gpucc GPU_CC_HUB_AON_CLK>;
|
|
|
|
clock-names = "gcc_gpu_memnoc_gfx_clk",
|
|
"gcc_gpu_snoc_dvm_gfx_clk",
|
|
"gpu_cc_ahb_clk",
|
|
"gpu_cc_hlos1_vote_gpu_smmu_clk",
|
|
"gpu_cc_cx_gmu_clk",
|
|
"gpu_cc_hub_cx_int_clk",
|
|
"gpu_cc_hub_aon_clk";
|
|
power-domains = <&gpucc GPU_CC_CX_GDSC>;
|
|
dma-coherent;
|
|
};
|
|
|
|
pmu@9091000 {
|
|
compatible = "qcom,qcs8300-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
|
|
reg = <0x0 0x9091000 0x0 0x1000>;
|
|
|
|
interrupts = <GIC_SPI 620 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
|
|
|
|
operating-points-v2 = <&llcc_bwmon_opp_table>;
|
|
|
|
llcc_bwmon_opp_table: opp-table {
|
|
compatible = "operating-points-v2";
|
|
|
|
opp-0 {
|
|
opp-peak-kBps = <762000>;
|
|
};
|
|
|
|
opp-1 {
|
|
opp-peak-kBps = <1720000>;
|
|
};
|
|
|
|
opp-2 {
|
|
opp-peak-kBps = <2086000>;
|
|
};
|
|
|
|
opp-3 {
|
|
opp-peak-kBps = <2601000>;
|
|
};
|
|
|
|
opp-4 {
|
|
opp-peak-kBps = <2929000>;
|
|
};
|
|
|
|
opp-5 {
|
|
opp-peak-kBps = <5931000>;
|
|
};
|
|
|
|
opp-6 {
|
|
opp-peak-kBps = <6515000>;
|
|
};
|
|
|
|
opp-7 {
|
|
opp-peak-kBps = <7984000>;
|
|
};
|
|
|
|
opp-8 {
|
|
opp-peak-kBps = <10437000>;
|
|
};
|
|
|
|
opp-9 {
|
|
opp-peak-kBps = <12195000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
pmu@90b5400 {
|
|
compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon";
|
|
reg = <0x0 0x90b5400 0x0 0x600>;
|
|
interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
|
|
&gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
|
|
|
|
operating-points-v2 = <&cpu_bwmon_opp_table>;
|
|
|
|
cpu_bwmon_opp_table: opp-table {
|
|
compatible = "operating-points-v2";
|
|
|
|
opp-0 {
|
|
opp-peak-kBps = <9155000>;
|
|
};
|
|
|
|
opp-1 {
|
|
opp-peak-kBps = <12298000>;
|
|
};
|
|
|
|
opp-2 {
|
|
opp-peak-kBps = <14236000>;
|
|
};
|
|
|
|
opp-3 {
|
|
opp-peak-kBps = <16265000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
pmu@90b6400 {
|
|
compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon";
|
|
reg = <0x0 0x90b6400 0x0 0x600>;
|
|
interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
|
|
interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
|
|
&gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
|
|
|
|
operating-points-v2 = <&cpu_bwmon_opp_table>;
|
|
};
|
|
|
|
dc_noc: interconnect@90e0000 {
|
|
compatible = "qcom,qcs8300-dc-noc";
|
|
reg = <0x0 0x090e0000 0x0 0x5080>;
|
|
#interconnect-cells = <2>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
gem_noc: interconnect@9100000 {
|
|
compatible = "qcom,qcs8300-gem-noc";
|
|
reg = <0x0 0x9100000 0x0 0xf7080>;
|
|
#interconnect-cells = <2>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
llcc: system-cache-controller@9200000 {
|
|
compatible = "qcom,qcs8300-llcc";
|
|
reg = <0x0 0x09200000 0x0 0x80000>,
|
|
<0x0 0x09300000 0x0 0x80000>,
|
|
<0x0 0x09400000 0x0 0x80000>,
|
|
<0x0 0x09500000 0x0 0x80000>,
|
|
<0x0 0x09a00000 0x0 0x80000>;
|
|
reg-names = "llcc0_base",
|
|
"llcc1_base",
|
|
"llcc2_base",
|
|
"llcc3_base",
|
|
"llcc_broadcast_base";
|
|
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
usb_1: usb@a6f8800 {
|
|
compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
|
|
reg = <0x0 0x0a6f8800 0x0 0x400>;
|
|
|
|
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
|
|
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
|
|
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
|
|
<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
|
|
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
|
|
clock-names = "cfg_noc",
|
|
"core",
|
|
"iface",
|
|
"sleep",
|
|
"mock_utmi";
|
|
|
|
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
|
|
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
|
|
assigned-clock-rates = <19200000>, <200000000>;
|
|
|
|
interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&pdc 14 IRQ_TYPE_EDGE_BOTH>,
|
|
<&pdc 15 IRQ_TYPE_EDGE_BOTH>,
|
|
<&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "pwr_event",
|
|
"hs_phy_irq",
|
|
"dp_hs_phy_irq",
|
|
"dm_hs_phy_irq",
|
|
"ss_phy_irq";
|
|
|
|
power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
|
|
required-opps = <&rpmhpd_opp_nom>;
|
|
|
|
resets = <&gcc GCC_USB30_PRIM_BCR>;
|
|
interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "usb-ddr", "apps-usb";
|
|
|
|
wakeup-source;
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
status = "disabled";
|
|
|
|
usb_1_dwc3: usb@a600000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x0 0x0a600000 0x0 0xe000>;
|
|
interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
|
|
iommus = <&apps_smmu 0x80 0x0>;
|
|
phys = <&usb_1_hsphy>, <&usb_qmpphy>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
snps,dis_enblslpm_quirk;
|
|
snps,dis-u1-entry-quirk;
|
|
snps,dis-u2-entry-quirk;
|
|
snps,dis_u2_susphy_quirk;
|
|
snps,dis_u3_susphy_quirk;
|
|
};
|
|
};
|
|
|
|
usb_2: usb@a4f8800 {
|
|
compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
|
|
reg = <0x0 0x0a4f8800 0x0 0x400>;
|
|
|
|
clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
|
|
<&gcc GCC_USB20_MASTER_CLK>,
|
|
<&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
|
|
<&gcc GCC_USB20_SLEEP_CLK>,
|
|
<&gcc GCC_USB20_MOCK_UTMI_CLK>;
|
|
clock-names = "cfg_noc",
|
|
"core",
|
|
"iface",
|
|
"sleep",
|
|
"mock_utmi";
|
|
|
|
assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
|
|
<&gcc GCC_USB20_MASTER_CLK>;
|
|
assigned-clock-rates = <19200000>, <120000000>;
|
|
|
|
interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
|
|
<&pdc 10 IRQ_TYPE_EDGE_BOTH>,
|
|
<&pdc 9 IRQ_TYPE_EDGE_BOTH>;
|
|
interrupt-names = "pwr_event",
|
|
"hs_phy_irq",
|
|
"dp_hs_phy_irq",
|
|
"dm_hs_phy_irq";
|
|
|
|
power-domains = <&gcc GCC_USB20_PRIM_GDSC>;
|
|
required-opps = <&rpmhpd_opp_nom>;
|
|
|
|
resets = <&gcc GCC_USB20_PRIM_BCR>;
|
|
|
|
interconnects = <&aggre1_noc MASTER_USB2 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
|
|
<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "usb-ddr", "apps-usb";
|
|
|
|
qcom,select-utmi-as-pipe-clk;
|
|
wakeup-source;
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
status = "disabled";
|
|
|
|
usb_2_dwc3: usb@a400000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x0 0x0a400000 0x0 0xe000>;
|
|
|
|
interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
|
|
iommus = <&apps_smmu 0x20 0x0>;
|
|
|
|
phys = <&usb_2_hsphy>;
|
|
phy-names = "usb2-phy";
|
|
maximum-speed = "high-speed";
|
|
|
|
snps,dis-u1-entry-quirk;
|
|
snps,dis-u2-entry-quirk;
|
|
snps,dis_u2_susphy_quirk;
|
|
snps,dis_u3_susphy_quirk;
|
|
snps,dis_enblslpm_quirk;
|
|
};
|
|
};
|
|
|
|
iris: video-codec@aa00000 {
|
|
compatible = "qcom,qcs8300-iris";
|
|
|
|
reg = <0x0 0x0aa00000 0x0 0xf0000>;
|
|
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
|
|
<&videocc VIDEO_CC_MVS0_GDSC>,
|
|
<&rpmhpd RPMHPD_MX>,
|
|
<&rpmhpd RPMHPD_MMCX>;
|
|
power-domain-names = "venus",
|
|
"vcodec0",
|
|
"mxc",
|
|
"mmcx";
|
|
|
|
operating-points-v2 = <&iris_opp_table>;
|
|
|
|
clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
|
|
<&videocc VIDEO_CC_MVS0C_CLK>,
|
|
<&videocc VIDEO_CC_MVS0_CLK>;
|
|
clock-names = "iface",
|
|
"core",
|
|
"vcodec0_core";
|
|
|
|
interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
|
|
&config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
|
|
<&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
interconnect-names = "cpu-cfg",
|
|
"video-mem";
|
|
|
|
memory-region = <&video_mem>;
|
|
|
|
resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
|
|
reset-names = "bus";
|
|
|
|
iommus = <&apps_smmu 0x0880 0x0400>,
|
|
<&apps_smmu 0x0887 0x0400>;
|
|
dma-coherent;
|
|
|
|
status = "disabled";
|
|
|
|
iris_opp_table: opp-table {
|
|
compatible = "operating-points-v2";
|
|
|
|
opp-366000000 {
|
|
opp-hz = /bits/ 64 <366000000>;
|
|
required-opps = <&rpmhpd_opp_svs_l1>,
|
|
<&rpmhpd_opp_svs_l1>;
|
|
};
|
|
|
|
opp-444000000 {
|
|
opp-hz = /bits/ 64 <444000000>;
|
|
required-opps = <&rpmhpd_opp_nom>,
|
|
<&rpmhpd_opp_nom>;
|
|
};
|
|
|
|
opp-533000000 {
|
|
opp-hz = /bits/ 64 <533000000>;
|
|
required-opps = <&rpmhpd_opp_turbo>,
|
|
<&rpmhpd_opp_turbo>;
|
|
};
|
|
|
|
opp-560000000 {
|
|
opp-hz = /bits/ 64 <560000000>;
|
|
required-opps = <&rpmhpd_opp_turbo_l1>,
|
|
<&rpmhpd_opp_turbo_l1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
videocc: clock-controller@abf0000 {
|
|
compatible = "qcom,qcs8300-videocc";
|
|
reg = <0x0 0x0abf0000 0x0 0x10000>;
|
|
clocks = <&gcc GCC_VIDEO_AHB_CLK>,
|
|
<&rpmhcc RPMH_CXO_CLK>,
|
|
<&rpmhcc RPMH_CXO_CLK_A>,
|
|
<&sleep_clk>;
|
|
power-domains = <&rpmhpd RPMHPD_MMCX>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
};
|
|
|
|
camcc: clock-controller@ade0000 {
|
|
compatible = "qcom,qcs8300-camcc";
|
|
reg = <0x0 0x0ade0000 0x0 0x20000>;
|
|
clocks = <&gcc GCC_CAMERA_AHB_CLK>,
|
|
<&rpmhcc RPMH_CXO_CLK>,
|
|
<&rpmhcc RPMH_CXO_CLK_A>,
|
|
<&sleep_clk>;
|
|
power-domains = <&rpmhpd RPMHPD_MMCX>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
};
|
|
|
|
dispcc: clock-controller@af00000 {
|
|
compatible = "qcom,sa8775p-dispcc0";
|
|
reg = <0x0 0x0af00000 0x0 0x20000>;
|
|
clocks = <&gcc GCC_DISP_AHB_CLK>,
|
|
<&rpmhcc RPMH_CXO_CLK>,
|
|
<&rpmhcc RPMH_CXO_CLK_A>,
|
|
<&sleep_clk>,
|
|
<0>, <0>, <0>, <0>,
|
|
<0>, <0>, <0>, <0>;
|
|
power-domains = <&rpmhpd RPMHPD_MMCX>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
};
|
|
|
|
pdc: interrupt-controller@b220000 {
|
|
compatible = "qcom,qcs8300-pdc", "qcom,pdc";
|
|
reg = <0x0 0xb220000 0x0 0x30000>,
|
|
<0x0 0x17c000f0 0x0 0x64>;
|
|
interrupt-parent = <&intc>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
qcom,pdc-ranges = <0 480 40>,
|
|
<40 140 14>,
|
|
<54 263 1>,
|
|
<55 306 4>,
|
|
<59 312 3>,
|
|
<62 374 2>,
|
|
<64 434 2>,
|
|
<66 438 2>,
|
|
<70 520 1>,
|
|
<73 523 1>,
|
|
<118 568 6>,
|
|
<124 609 3>,
|
|
<159 638 1>,
|
|
<160 720 3>,
|
|
<169 728 30>,
|
|
<199 416 2>,
|
|
<201 449 1>,
|
|
<202 89 1>,
|
|
<203 451 1>,
|
|
<204 462 1>,
|
|
<205 264 1>,
|
|
<206 579 1>,
|
|
<207 653 1>,
|
|
<208 656 1>,
|
|
<209 659 1>,
|
|
<210 122 1>,
|
|
<211 699 1>,
|
|
<212 705 1>,
|
|
<213 450 1>,
|
|
<214 643 2>,
|
|
<216 646 5>,
|
|
<221 390 5>,
|
|
<226 700 2>,
|
|
<228 440 1>,
|
|
<229 663 1>,
|
|
<230 524 2>,
|
|
<232 612 3>,
|
|
<235 723 5>;
|
|
};
|
|
|
|
aoss_qmp: power-management@c300000 {
|
|
compatible = "qcom,qcs8300-aoss-qmp", "qcom,aoss-qmp";
|
|
reg = <0x0 0x0c300000 0x0 0x400>;
|
|
interrupts-extended = <&ipcc IPCC_CLIENT_AOP
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
sram@c3f0000 {
|
|
compatible = "qcom,rpmh-stats";
|
|
reg = <0x0 0x0c3f0000 0x0 0x400>;
|
|
};
|
|
|
|
spmi_bus: spmi@c440000 {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
reg = <0x0 0x0c440000 0x0 0x1100>,
|
|
<0x0 0x0c600000 0x0 0x2000000>,
|
|
<0x0 0x0e600000 0x0 0x100000>,
|
|
<0x0 0x0e700000 0x0 0xa0000>,
|
|
<0x0 0x0c40a000 0x0 0x26000>;
|
|
reg-names = "core",
|
|
"chnls",
|
|
"obsrvr",
|
|
"intr",
|
|
"cnfg";
|
|
qcom,channel = <0>;
|
|
qcom,ee = <0>;
|
|
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "periph_irq";
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
tlmm: pinctrl@f100000 {
|
|
compatible = "qcom,qcs8300-tlmm";
|
|
reg = <0x0 0x0f100000 0x0 0x300000>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&tlmm 0 0 134>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
wakeup-parent = <&pdc>;
|
|
|
|
qup_i2c0_data_clk: qup-i2c0-data-clk-state {
|
|
pins = "gpio17", "gpio18";
|
|
function = "qup0_se0";
|
|
};
|
|
|
|
qup_i2c1_data_clk: qup-i2c1-data-clk-state {
|
|
pins = "gpio19", "gpio20";
|
|
function = "qup0_se1";
|
|
};
|
|
|
|
qup_i2c2_data_clk: qup-i2c2-data-clk-state {
|
|
pins = "gpio33", "gpio34";
|
|
function = "qup0_se2";
|
|
};
|
|
|
|
qup_i2c3_data_clk: qup-i2c3-data-clk-state {
|
|
pins = "gpio25", "gpio26";
|
|
function = "qup0_se3";
|
|
};
|
|
|
|
qup_i2c4_data_clk: qup-i2c4-data-clk-state {
|
|
pins = "gpio29", "gpio30";
|
|
function = "qup0_se4";
|
|
};
|
|
|
|
qup_i2c5_data_clk: qup-i2c5-data-clk-state {
|
|
pins = "gpio21", "gpio22";
|
|
function = "qup0_se5";
|
|
};
|
|
|
|
qup_i2c6_data_clk: qup-i2c6-data-clk-state {
|
|
pins = "gpio80", "gpio81";
|
|
function = "qup0_se6";
|
|
};
|
|
|
|
qup_i2c8_data_clk: qup-i2c8-data-clk-state {
|
|
pins = "gpio37", "gpio38";
|
|
function = "qup1_se0";
|
|
};
|
|
|
|
qup_i2c9_data_clk: qup-i2c9-data-clk-state {
|
|
pins = "gpio39", "gpio40";
|
|
function = "qup1_se1";
|
|
};
|
|
|
|
qup_i2c10_data_clk: qup-i2c10-data-clk-state {
|
|
pins = "gpio84", "gpio85";
|
|
function = "qup1_se2";
|
|
};
|
|
|
|
qup_i2c11_data_clk: qup-i2c11-data-clk-state {
|
|
pins = "gpio41", "gpio42";
|
|
function = "qup1_se3";
|
|
};
|
|
|
|
qup_i2c12_data_clk: qup-i2c12-data-clk-state {
|
|
pins = "gpio45", "gpio46";
|
|
function = "qup1_se4";
|
|
};
|
|
|
|
qup_i2c13_data_clk: qup-i2c13-data-clk-state {
|
|
pins = "gpio49", "gpio50";
|
|
function = "qup1_se5";
|
|
};
|
|
|
|
qup_i2c14_data_clk: qup-i2c14-data-clk-state {
|
|
pins = "gpio89", "gpio90";
|
|
function = "qup1_se6";
|
|
};
|
|
|
|
qup_i2c15_data_clk: qup-i2c15-data-clk-state {
|
|
pins = "gpio91", "gpio92";
|
|
function = "qup1_se7";
|
|
};
|
|
|
|
qup_i2c16_data_clk: qup-i2c16-data-clk-state {
|
|
pins = "gpio10", "gpio11";
|
|
function = "qup2_se0";
|
|
};
|
|
|
|
qup_spi0_data_clk: qup-spi0-data-clk-state {
|
|
pins = "gpio17", "gpio18", "gpio19";
|
|
function = "qup0_se0";
|
|
};
|
|
|
|
qup_spi0_cs: qup-spi0-cs-state {
|
|
pins = "gpio20";
|
|
function = "qup0_se0";
|
|
};
|
|
|
|
qup_spi0_cs_gpio: qup-spi0-cs-gpio-state {
|
|
pins = "gpio20";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_spi1_data_clk: qup-spi1-data-clk-state {
|
|
pins = "gpio19", "gpio20", "gpio17";
|
|
function = "qup0_se1";
|
|
};
|
|
|
|
qup_spi1_cs: qup-spi1-cs-state {
|
|
pins = "gpio18";
|
|
function = "qup0_se1";
|
|
};
|
|
|
|
qup_spi1_cs_gpio: qup-spi1-cs-gpio-state {
|
|
pins = "gpio18";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_spi2_data_clk: qup-spi2-data-clk-state {
|
|
pins = "gpio33", "gpio34", "gpio35";
|
|
function = "qup0_se2";
|
|
};
|
|
|
|
qup_spi2_cs: qup-spi2-cs-state {
|
|
pins = "gpio36";
|
|
function = "qup0_se2";
|
|
};
|
|
|
|
qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
|
|
pins = "gpio36";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_spi3_data_clk: qup-spi3-data-clk-state {
|
|
pins = "gpio25", "gpio26", "gpio27";
|
|
function = "qup0_se3";
|
|
};
|
|
|
|
qup_spi3_cs: qup-spi3-cs-state {
|
|
pins = "gpio28";
|
|
function = "qup0_se3";
|
|
};
|
|
|
|
qup_spi3_cs_gpio: qup-spi3-cs-gpio-state {
|
|
pins = "gpio28";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_spi4_data_clk: qup-spi4-data-clk-state {
|
|
pins = "gpio29", "gpio30", "gpio31";
|
|
function = "qup0_se4";
|
|
};
|
|
|
|
qup_spi4_cs: qup-spi4-cs-state {
|
|
pins = "gpio32";
|
|
function = "qup0_se4";
|
|
};
|
|
|
|
qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
|
|
pins = "gpio32";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_spi5_data_clk: qup-spi5-data-clk-state {
|
|
pins = "gpio21", "gpio22", "gpio23";
|
|
function = "qup0_se5";
|
|
};
|
|
|
|
qup_spi5_cs: qup-spi5-cs-state {
|
|
pins = "gpio24";
|
|
function = "qup0_se5";
|
|
};
|
|
|
|
qup_spi5_cs_gpio: qup-spi5-cs-gpio-state {
|
|
pins = "gpio24";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_spi6_data_clk: qup-spi6-data-clk-state {
|
|
pins = "gpio80", "gpio81", "gpio82";
|
|
function = "qup0_se6";
|
|
};
|
|
|
|
qup_spi6_cs: qup-spi6-cs-state {
|
|
pins = "gpio83";
|
|
function = "qup0_se6";
|
|
};
|
|
|
|
qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
|
|
pins = "gpio83";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_spi8_data_clk: qup-spi8-data-clk-state {
|
|
pins = "gpio37", "gpio38", "gpio39";
|
|
function = "qup1_se0";
|
|
};
|
|
|
|
qup_spi8_cs: qup-spi8-cs-state {
|
|
pins = "gpio40";
|
|
function = "qup1_se0";
|
|
};
|
|
|
|
qup_spi8_cs_gpio: qup-spi8-cs-gpio-state {
|
|
pins = "gpio40";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_spi9_data_clk: qup-spi9-data-clk-state {
|
|
pins = "gpio39", "gpio40", "gpio37";
|
|
function = "qup1_se1";
|
|
};
|
|
|
|
qup_spi9_cs: qup-spi9-cs-state {
|
|
pins = "gpio38";
|
|
function = "qup1_se1";
|
|
};
|
|
|
|
qup_spi9_cs_gpio: qup-spi9-cs-gpio-state {
|
|
pins = "gpio38";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_spi10_data_clk: qup-spi10-data-clk-state {
|
|
pins = "gpio84", "gpio85", "gpio86";
|
|
function = "qup1_se2";
|
|
};
|
|
|
|
qup_spi10_cs: qup-spi10-cs-state {
|
|
pins = "gpio87";
|
|
function = "qup1_se2";
|
|
};
|
|
|
|
qup_spi10_cs_gpio: qup-spi10-cs-gpio-state {
|
|
pins = "gpio87";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_spi12_data_clk: qup-spi12-data-clk-state {
|
|
pins = "gpio45", "gpio46", "gpio47";
|
|
function = "qup1_se4";
|
|
};
|
|
|
|
qup_spi12_cs: qup-spi12-cs-state {
|
|
pins = "gpio48";
|
|
function = "qup1_se4";
|
|
};
|
|
|
|
qup_spi12_cs_gpio: qup-spi12-cs-gpio-state {
|
|
pins = "gpio48";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_spi13_data_clk: qup-spi13-data-clk-state {
|
|
pins = "gpio49", "gpio50", "gpio51";
|
|
function = "qup1_se5";
|
|
};
|
|
|
|
qup_spi13_cs: qup-spi13-cs-state {
|
|
pins = "gpio52";
|
|
function = "qup1_se5";
|
|
};
|
|
|
|
qup_spi13_cs_gpio: qup-spi13-cs-gpio-state {
|
|
pins = "gpio52";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_spi14_data_clk: qup-spi14-data-clk-state {
|
|
pins = "gpio89", "gpio90", "gpio91";
|
|
function = "qup1_se6";
|
|
};
|
|
|
|
qup_spi14_cs: qup-spi14-cs-state {
|
|
pins = "gpio92";
|
|
function = "qup1_se6";
|
|
};
|
|
|
|
qup_spi14_cs_gpio: qup-spi14-cs-gpio-state {
|
|
pins = "gpio92";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_spi15_data_clk: qup-spi15-data-clk-state {
|
|
pins = "gpio91", "gpio92", "gpio89";
|
|
function = "qup1_se7";
|
|
};
|
|
|
|
qup_spi15_cs: qup-spi15-cs-state {
|
|
pins = "gpio90";
|
|
function = "qup1_se7";
|
|
};
|
|
|
|
qup_spi15_cs_gpio: qup-spi15-cs-gpio-state {
|
|
pins = "gpio90";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_spi16_data_clk: qup-spi16-data-clk-state {
|
|
pins = "gpio10", "gpio11", "gpio12";
|
|
function = "qup2_se0";
|
|
};
|
|
|
|
qup_spi16_cs: qup-spi16-cs-state {
|
|
pins = "gpio13";
|
|
function = "qup2_se0";
|
|
};
|
|
|
|
qup_spi16_cs_gpio: qup-spi16-cs-gpio-state {
|
|
pins = "gpio13";
|
|
function = "gpio";
|
|
};
|
|
|
|
qup_uart0_cts: qup-uart0-cts-state {
|
|
pins = "gpio17";
|
|
function = "qup0_se0";
|
|
};
|
|
|
|
qup_uart0_rts: qup-uart0-rts-state {
|
|
pins = "gpio18";
|
|
function = "qup0_se0";
|
|
};
|
|
|
|
qup_uart0_tx: qup-uart0-tx-state {
|
|
pins = "gpio19";
|
|
function = "qup0_se0";
|
|
};
|
|
|
|
qup_uart0_rx: qup-uart0-rx-state {
|
|
pins = "gpio20";
|
|
function = "qup0_se0";
|
|
};
|
|
|
|
qup_uart1_cts: qup-uart1-cts-state {
|
|
pins = "gpio19";
|
|
function = "qup0_se1";
|
|
};
|
|
|
|
qup_uart1_rts: qup-uart1-rts-state {
|
|
pins = "gpio20";
|
|
function = "qup0_se1";
|
|
};
|
|
|
|
qup_uart1_tx: qup-uart1-tx-state {
|
|
pins = "gpio17";
|
|
function = "qup0_se1";
|
|
};
|
|
|
|
qup_uart1_rx: qup-uart1-rx-state {
|
|
pins = "gpio18";
|
|
function = "qup0_se1";
|
|
};
|
|
|
|
qup_uart2_cts: qup-uart2-cts-state {
|
|
pins = "gpio33";
|
|
function = "qup0_se2";
|
|
};
|
|
|
|
qup_uart2_rts: qup-uart2-rts-state {
|
|
pins = "gpio34";
|
|
function = "qup0_se2";
|
|
};
|
|
|
|
qup_uart2_tx: qup-uart2-tx-state {
|
|
pins = "gpio35";
|
|
function = "qup0_se2";
|
|
};
|
|
|
|
qup_uart2_rx: qup-uart2-rx-state {
|
|
pins = "gpio36";
|
|
function = "qup0_se2";
|
|
};
|
|
|
|
qup_uart3_cts: qup-uart3-cts-state {
|
|
pins = "gpio25";
|
|
function = "qup0_se3";
|
|
};
|
|
|
|
qup_uart3_rts: qup-uart3-rts-state {
|
|
pins = "gpio26";
|
|
function = "qup0_se3";
|
|
};
|
|
|
|
qup_uart3_tx: qup-uart3-tx-state {
|
|
pins = "gpio27";
|
|
function = "qup0_se3";
|
|
};
|
|
|
|
qup_uart3_rx: qup-uart3-rx-state {
|
|
pins = "gpio28";
|
|
function = "qup0_se3";
|
|
};
|
|
|
|
qup_uart4_cts: qup-uart4-cts-state {
|
|
pins = "gpio29";
|
|
function = "qup0_se4";
|
|
};
|
|
|
|
qup_uart4_rts: qup-uart4-rts-state {
|
|
pins = "gpio30";
|
|
function = "qup0_se4";
|
|
};
|
|
|
|
qup_uart4_tx: qup-uart4-tx-state {
|
|
pins = "gpio31";
|
|
function = "qup0_se4";
|
|
};
|
|
|
|
qup_uart4_rx: qup-uart4-rx-state {
|
|
pins = "gpio32";
|
|
function = "qup0_se4";
|
|
};
|
|
|
|
qup_uart5_cts: qup-uart5-cts-state {
|
|
pins = "gpio21";
|
|
function = "qup0_se5";
|
|
};
|
|
|
|
qup_uart5_rts: qup-uart5-rts-state {
|
|
pins = "gpio22";
|
|
function = "qup0_se5";
|
|
};
|
|
|
|
qup_uart5_tx: qup-uart5-tx-state {
|
|
pins = "gpio23";
|
|
function = "qup0_se5";
|
|
};
|
|
|
|
qup_uart5_rx: qup-uart5-rx-state {
|
|
pins = "gpio23";
|
|
function = "qup0_se5";
|
|
};
|
|
|
|
qup_uart6_cts: qup-uart6-cts-state {
|
|
pins = "gpio80";
|
|
function = "qup0_se6";
|
|
};
|
|
|
|
qup_uart6_rts: qup-uart6-rts-state {
|
|
pins = "gpio81";
|
|
function = "qup0_se6";
|
|
};
|
|
|
|
qup_uart6_tx: qup-uart6-tx-state {
|
|
pins = "gpio82";
|
|
function = "qup0_se6";
|
|
};
|
|
|
|
qup_uart6_rx: qup-uart6-rx-state {
|
|
pins = "gpio83";
|
|
function = "qup0_se6";
|
|
};
|
|
|
|
qup_uart7_tx: qup-uart7-tx-state {
|
|
pins = "gpio43";
|
|
function = "qup0_se7";
|
|
};
|
|
|
|
qup_uart7_rx: qup-uart7-rx-state {
|
|
pins = "gpio44";
|
|
function = "qup0_se7";
|
|
};
|
|
|
|
qup_uart8_cts: qup-uart8-cts-state {
|
|
pins = "gpio37";
|
|
function = "qup1_se0";
|
|
};
|
|
|
|
qup_uart8_rts: qup-uart8-rts-state {
|
|
pins = "gpio38";
|
|
function = "qup1_se0";
|
|
};
|
|
|
|
qup_uart8_tx: qup-uart8-tx-state {
|
|
pins = "gpio39";
|
|
function = "qup1_se0";
|
|
};
|
|
|
|
qup_uart8_rx: qup-uart8-rx-state {
|
|
pins = "gpio40";
|
|
function = "qup1_se0";
|
|
};
|
|
|
|
qup_uart9_cts: qup-uart9-cts-state {
|
|
pins = "gpio39";
|
|
function = "qup1_se1";
|
|
};
|
|
|
|
qup_uart9_rts: qup-uart9-rts-state {
|
|
pins = "gpio40";
|
|
function = "qup1_se1";
|
|
};
|
|
|
|
qup_uart9_tx: qup-uart9-tx-state {
|
|
pins = "gpio37";
|
|
function = "qup1_se1";
|
|
};
|
|
|
|
qup_uart9_rx: qup-uart9-rx-state {
|
|
pins = "gpio38";
|
|
function = "qup1_se1";
|
|
};
|
|
|
|
qup_uart10_cts: qup-uart10-cts-state {
|
|
pins = "gpio84";
|
|
function = "qup1_se2";
|
|
};
|
|
|
|
qup_uart10_rts: qup-uart10-rts-state {
|
|
pins = "gpio84";
|
|
function = "qup1_se2";
|
|
};
|
|
|
|
qup_uart10_tx: qup-uart10-tx-state {
|
|
pins = "gpio85";
|
|
function = "qup1_se2";
|
|
};
|
|
|
|
qup_uart10_rx: qup-uart10-rx-state {
|
|
pins = "gpio87";
|
|
function = "qup1_se2";
|
|
};
|
|
|
|
qup_uart11_tx: qup-uart11-tx-state {
|
|
pins = "gpio41";
|
|
function = "qup1_se3";
|
|
};
|
|
|
|
qup_uart11_rx: qup-uart11-rx-state {
|
|
pins = "gpio42";
|
|
function = "qup1_se3";
|
|
};
|
|
|
|
qup_uart12_cts: qup-uart12-cts-state {
|
|
pins = "gpio45";
|
|
function = "qup1_se4";
|
|
};
|
|
|
|
qup_uart12_rts: qup-uart12-rts-state {
|
|
pins = "gpio46";
|
|
function = "qup1_se4";
|
|
};
|
|
|
|
qup_uart12_tx: qup-uart12-tx-state {
|
|
pins = "gpio47";
|
|
function = "qup1_se4";
|
|
};
|
|
|
|
qup_uart12_rx: qup-uart12-rx-state {
|
|
pins = "gpio48";
|
|
function = "qup1_se4";
|
|
};
|
|
|
|
qup_uart13_cts: qup-uart13-cts-state {
|
|
pins = "gpio49";
|
|
function = "qup1_se5";
|
|
};
|
|
|
|
qup_uart13_rts: qup-uart13-rts-state {
|
|
pins = "gpio50";
|
|
function = "qup1_se5";
|
|
};
|
|
|
|
qup_uart13_tx: qup-uart13-tx-state {
|
|
pins = "gpio51";
|
|
function = "qup1_se5";
|
|
};
|
|
|
|
qup_uart13_rx: qup-uart13-rx-state {
|
|
pins = "gpio52";
|
|
function = "qup1_se5";
|
|
};
|
|
|
|
qup_uart14_cts: qup-uart14-cts-state {
|
|
pins = "gpio89";
|
|
function = "qup1_se6";
|
|
};
|
|
|
|
qup_uart14_rts: qup-uart14-rts-state {
|
|
pins = "gpio90";
|
|
function = "qup1_se6";
|
|
};
|
|
|
|
qup_uart14_tx: qup-uart14-tx-state {
|
|
pins = "gpio91";
|
|
function = "qup1_se6";
|
|
};
|
|
|
|
qup_uart14_rx: qup-uart14-rx-state {
|
|
pins = "gpio92";
|
|
function = "qup1_se6";
|
|
};
|
|
|
|
qup_uart15_cts: qup-uart15-cts-state {
|
|
pins = "gpio91";
|
|
function = "qup1_se7";
|
|
};
|
|
|
|
qup_uart15_rts: qup-uart15-rts-state {
|
|
pins = "gpio92";
|
|
function = "qup1_se7";
|
|
};
|
|
|
|
qup_uart15_tx: qup-uart15-tx-state {
|
|
pins = "gpio89";
|
|
function = "qup1_se7";
|
|
};
|
|
|
|
qup_uart15_rx: qup-uart15-rx-state {
|
|
pins = "gpio90";
|
|
function = "qup1_se7";
|
|
};
|
|
|
|
qup_uart16_cts: qup-uart16-cts-state {
|
|
pins = "gpio10";
|
|
function = "qup2_se0";
|
|
};
|
|
|
|
qup_uart16_rts: qup-uart16-rts-state {
|
|
pins = "gpio11";
|
|
function = "qup2_se0";
|
|
};
|
|
|
|
qup_uart16_tx: qup-uart16-tx-state {
|
|
pins = "gpio12";
|
|
function = "qup2_se0";
|
|
};
|
|
|
|
qup_uart16_rx: qup-uart16-rx-state {
|
|
pins = "gpio13";
|
|
function = "qup2_se0";
|
|
};
|
|
};
|
|
|
|
sram: sram@146d8000 {
|
|
compatible = "qcom,qcs8300-imem", "syscon", "simple-mfd";
|
|
reg = <0x0 0x146d8000 0x0 0x1000>;
|
|
ranges = <0x0 0x0 0x146d8000 0x1000>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
pil-reloc@94c {
|
|
compatible = "qcom,pil-reloc-info";
|
|
reg = <0x94c 0xc8>;
|
|
};
|
|
};
|
|
|
|
apps_smmu: iommu@15000000 {
|
|
compatible = "qcom,qcs8300-smmu-500", "qcom,smmu-500", "arm,mmu-500";
|
|
|
|
reg = <0x0 0x15000000 0x0 0x100000>;
|
|
#iommu-cells = <2>;
|
|
#global-interrupts = <2>;
|
|
dma-coherent;
|
|
|
|
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
pcie_smmu: iommu@15200000 {
|
|
compatible = "qcom,qcs8300-smmu-500", "qcom,smmu-500", "arm,mmu-500";
|
|
reg = <0x0 0x15200000 0x0 0x80000>;
|
|
#iommu-cells = <2>;
|
|
#global-interrupts = <2>;
|
|
dma-coherent;
|
|
|
|
interrupts = <GIC_SPI 920 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 921 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 925 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 926 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 927 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 928 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 950 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 951 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 954 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 955 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 956 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 957 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 958 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 885 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 886 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 888 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 847 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 814 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 839 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 854 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 855 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 639 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
intc: interrupt-controller@17a00000 {
|
|
compatible = "arm,gic-v3";
|
|
reg = <0x0 0x17a00000 0x0 0x10000>,
|
|
<0x0 0x17a60000 0x0 0x100000>;
|
|
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
#redistributor-regions = <1>;
|
|
redistributor-stride = <0x0 0x20000>;
|
|
};
|
|
|
|
watchdog@17c10000 {
|
|
compatible = "qcom,apss-wdt-qcs8300", "qcom,kpss-wdt";
|
|
reg = <0x0 0x17c10000 0x0 0x1000>;
|
|
clocks = <&sleep_clk>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
|
|
timer@17c20000 {
|
|
compatible = "arm,armv7-timer-mem";
|
|
reg = <0x0 0x17c20000 0x0 0x1000>;
|
|
ranges = <0x0 0x0 0x0 0x20000000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
frame@17c21000 {
|
|
reg = <0x17c21000 0x1000>,
|
|
<0x17c22000 0x1000>;
|
|
frame-number = <0>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
frame@17c23000 {
|
|
reg = <0x17c23000 0x1000>;
|
|
frame-number = <1>;
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17c25000 {
|
|
reg = <0x17c25000 0x1000>;
|
|
frame-number = <2>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17c27000 {
|
|
reg = <0x17c27000 0x1000>;
|
|
frame-number = <3>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17c29000 {
|
|
reg = <0x17c29000 0x1000>;
|
|
frame-number = <4>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17c2b000 {
|
|
reg = <0x17c2b000 0x1000>;
|
|
frame-number = <5>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@17c2d000 {
|
|
reg = <0x17c2d000 0x1000>;
|
|
frame-number = <6>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
apps_rsc: rsc@18200000 {
|
|
compatible = "qcom,rpmh-rsc";
|
|
reg = <0x0 0x18200000 0x0 0x10000>,
|
|
<0x0 0x18210000 0x0 0x10000>,
|
|
<0x0 0x18220000 0x0 0x10000>;
|
|
reg-names = "drv-0",
|
|
"drv-1",
|
|
"drv-2";
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
power-domains = <&system_pd>;
|
|
label = "apps_rsc";
|
|
|
|
qcom,tcs-offset = <0xd00>;
|
|
qcom,drv-id = <2>;
|
|
qcom,tcs-config = <ACTIVE_TCS 2>,
|
|
<SLEEP_TCS 3>,
|
|
<WAKE_TCS 3>,
|
|
<CONTROL_TCS 0>;
|
|
|
|
apps_bcm_voter: bcm-voter {
|
|
compatible = "qcom,bcm-voter";
|
|
};
|
|
|
|
rpmhcc: clock-controller {
|
|
compatible = "qcom,sa8775p-rpmh-clk";
|
|
#clock-cells = <1>;
|
|
clocks = <&xo_board_clk>;
|
|
clock-names = "xo";
|
|
};
|
|
|
|
rpmhpd: power-controller {
|
|
compatible = "qcom,qcs8300-rpmhpd";
|
|
#power-domain-cells = <1>;
|
|
operating-points-v2 = <&rpmhpd_opp_table>;
|
|
|
|
rpmhpd_opp_table: opp-table {
|
|
compatible = "operating-points-v2";
|
|
|
|
rpmhpd_opp_ret: opp-0 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
|
|
};
|
|
|
|
rpmhpd_opp_min_svs: opp-1 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
|
|
};
|
|
|
|
rpmhpd_opp_low_svs: opp-2 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
|
|
};
|
|
|
|
rpmhpd_opp_svs: opp-3 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
|
|
};
|
|
|
|
rpmhpd_opp_svs_l1: opp-4 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
|
|
};
|
|
|
|
rpmhpd_opp_nom: opp-5 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
|
|
};
|
|
|
|
rpmhpd_opp_nom_l1: opp-6 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
|
|
};
|
|
|
|
rpmhpd_opp_nom_l2: opp-7 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
|
|
};
|
|
|
|
rpmhpd_opp_turbo: opp-8 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
|
|
};
|
|
|
|
rpmhpd_opp_turbo_l1: opp-9 {
|
|
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
cpufreq_hw: cpufreq@18591000 {
|
|
compatible = "qcom,qcs8300-cpufreq-epss", "qcom,cpufreq-epss";
|
|
reg = <0x0 0x18591000 0x0 0x1000>,
|
|
<0x0 0x18593000 0x0 0x1000>,
|
|
<0x0 0x18594000 0x0 0x1000>;
|
|
reg-names = "freq-domain0",
|
|
"freq-domain1",
|
|
"freq-domain2";
|
|
|
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "dcvsh-irq-0",
|
|
"dcvsh-irq-1",
|
|
"dcvsh-irq-2";
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
|
|
clock-names = "xo", "alternate";
|
|
|
|
#freq-domain-cells = <1>;
|
|
};
|
|
|
|
remoteproc_gpdsp: remoteproc@20c00000 {
|
|
compatible = "qcom,qcs8300-gpdsp-pas", "qcom,sa8775p-gpdsp0-pas";
|
|
reg = <0x0 0x20c00000 0x0 0x10000>;
|
|
|
|
interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
|
|
<&smp2p_gpdsp_in 0 0>,
|
|
<&smp2p_gpdsp_in 1 0>,
|
|
<&smp2p_gpdsp_in 2 0>,
|
|
<&smp2p_gpdsp_in 3 0>;
|
|
interrupt-names = "wdog",
|
|
"fatal",
|
|
"ready",
|
|
"handover",
|
|
"stop-ack";
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
clock-names = "xo";
|
|
|
|
power-domains = <&rpmhpd RPMHPD_CX>,
|
|
<&rpmhpd RPMHPD_MXC>;
|
|
power-domain-names = "cx",
|
|
"mxc";
|
|
|
|
interconnects = <&gpdsp_anoc MASTER_DSP0 QCOM_ICC_TAG_ALWAYS
|
|
&config_noc SLAVE_CLK_CTL QCOM_ICC_TAG_ALWAYS>;
|
|
|
|
memory-region = <&gpdsp_mem>;
|
|
|
|
qcom,qmp = <&aoss_qmp>;
|
|
|
|
qcom,smem-states = <&smp2p_gpdsp_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
|
|
status = "disabled";
|
|
|
|
glink-edge {
|
|
interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc IPCC_CLIENT_GPDSP0
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP>;
|
|
|
|
label = "gpdsp";
|
|
qcom,remote-pid = <17>;
|
|
};
|
|
};
|
|
|
|
ethernet0: ethernet@23040000 {
|
|
compatible = "qcom,qcs8300-ethqos", "qcom,sa8775p-ethqos";
|
|
reg = <0x0 0x23040000 0x0 0x00010000>,
|
|
<0x0 0x23056000 0x0 0x00000100>;
|
|
reg-names = "stmmaceth", "rgmii";
|
|
|
|
interrupts = <GIC_SPI 946 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq", "sfty";
|
|
|
|
clocks = <&gcc GCC_EMAC0_AXI_CLK>,
|
|
<&gcc GCC_EMAC0_SLV_AHB_CLK>,
|
|
<&gcc GCC_EMAC0_PTP_CLK>,
|
|
<&gcc GCC_EMAC0_PHY_AUX_CLK>;
|
|
clock-names = "stmmaceth",
|
|
"pclk",
|
|
"ptp_ref",
|
|
"phyaux";
|
|
power-domains = <&gcc GCC_EMAC0_GDSC>;
|
|
|
|
phys = <&serdes0>;
|
|
phy-names = "serdes";
|
|
|
|
iommus = <&apps_smmu 0x120 0xf>;
|
|
dma-coherent;
|
|
|
|
snps,tso;
|
|
snps,pbl = <32>;
|
|
rx-fifo-depth = <16384>;
|
|
tx-fifo-depth = <20480>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
nspa_noc: interconnect@260c0000 {
|
|
compatible = "qcom,qcs8300-nspa-noc";
|
|
reg = <0x0 0x260c0000 0x0 0x16080>;
|
|
#interconnect-cells = <2>;
|
|
qcom,bcm-voters = <&apps_bcm_voter>;
|
|
};
|
|
|
|
remoteproc_cdsp: remoteproc@26300000 {
|
|
compatible = "qcom,qcs8300-cdsp-pas", "qcom,sa8775p-cdsp0-pas";
|
|
reg = <0x0 0x26300000 0x0 0x10000>;
|
|
|
|
interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
|
|
<&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
|
|
<&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
|
|
<&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
|
|
<&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "wdog",
|
|
"fatal",
|
|
"ready",
|
|
"handover",
|
|
"stop-ack";
|
|
|
|
clocks = <&rpmhcc RPMH_CXO_CLK>;
|
|
clock-names = "xo";
|
|
|
|
power-domains = <&rpmhpd RPMHPD_CX>,
|
|
<&rpmhpd RPMHPD_MXC>,
|
|
<&rpmhpd RPMHPD_NSP0>;
|
|
|
|
power-domain-names = "cx",
|
|
"mxc",
|
|
"nsp";
|
|
|
|
interconnects = <&nspa_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
|
|
&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
|
|
|
|
memory-region = <&cdsp_mem>;
|
|
|
|
qcom,qmp = <&aoss_qmp>;
|
|
|
|
qcom,smem-states = <&smp2p_cdsp_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
|
|
status = "disabled";
|
|
|
|
glink-edge {
|
|
interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP
|
|
IRQ_TYPE_EDGE_RISING>;
|
|
mboxes = <&ipcc IPCC_CLIENT_CDSP
|
|
IPCC_MPROC_SIGNAL_GLINK_QMP>;
|
|
|
|
label = "cdsp";
|
|
qcom,remote-pid = <5>;
|
|
|
|
fastrpc {
|
|
compatible = "qcom,fastrpc";
|
|
qcom,glink-channels = "fastrpcglink-apps-dsp";
|
|
label = "cdsp";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
compute-cb@1 {
|
|
compatible = "qcom,fastrpc-compute-cb";
|
|
reg = <1>;
|
|
iommus = <&apps_smmu 0x19c1 0x0440>,
|
|
<&apps_smmu 0x1961 0x0400>;
|
|
dma-coherent;
|
|
};
|
|
|
|
compute-cb@2 {
|
|
compatible = "qcom,fastrpc-compute-cb";
|
|
reg = <2>;
|
|
iommus = <&apps_smmu 0x19c2 0x0440>,
|
|
<&apps_smmu 0x1962 0x0400>;
|
|
dma-coherent;
|
|
};
|
|
|
|
compute-cb@3 {
|
|
compatible = "qcom,fastrpc-compute-cb";
|
|
reg = <3>;
|
|
iommus = <&apps_smmu 0x19c3 0x0440>,
|
|
<&apps_smmu 0x1963 0x0400>;
|
|
dma-coherent;
|
|
};
|
|
|
|
compute-cb@4 {
|
|
compatible = "qcom,fastrpc-compute-cb";
|
|
reg = <4>;
|
|
iommus = <&apps_smmu 0x19c4 0x0440>,
|
|
<&apps_smmu 0x1964 0x0400>;
|
|
dma-coherent;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
};
|