Proxmox-Port/linux-loongson
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson synced 2025-08-31 22:23:05 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
loongarch-next
linux-loongson/arch/arm64/boot/dts/qcom/qcs615-ride.dts
Lijuan Gao 47d59463bd arm64: dts: qcom: qcs615-ride: enable remoteprocs 
Enable all remoteproc nodes on the qcs615-ride board and point to the
appropriate firmware files to allow proper functioning of the remote
processors.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
Link: https://lore.kernel.org/r/20250526-add_qcs615_remoteproc_support-v4-6-06a7d8bed0b5@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-06-17 23:08:31 -05:00

356 lines
7.7 KiB
Plaintext
Raw Permalink Blame History

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/gpio/gpio.h>
#include "qcs615.dtsi"
#include "pm8150.dtsi"
/ {
model = "Qualcomm Technologies, Inc. QCS615 Ride";
compatible = "qcom,qcs615-ride", "qcom,qcs615";
chassis-type = "embedded";
aliases {
mmc0 = &sdhc_1;
mmc1 = &sdhc_2;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
clocks {
sleep_clk: sleep-clk {
compatible = "fixed-clock";
clock-frequency = <32000>;
#clock-cells = <0>;
};
xo_board_clk: xo-board-clk {
compatible = "fixed-clock";
clock-frequency = <38400000>;
#clock-cells = <0>;
};
};
regulator-usb2-vbus {
compatible = "regulator-fixed";
regulator-name = "USB2_VBUS";
gpio = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&usb2_en>;
pinctrl-names = "default";
enable-active-high;
regulator-always-on;
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8150-rpmh-regulators";
qcom,pmic-id = "a";
vreg_s3a: smps3 {
regulator-name = "vreg_s3a";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <650000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s4a: smps4 {
regulator-name = "vreg_s4a";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1829000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s5a: smps5 {
regulator-name = "vreg_s5a";
regulator-min-microvolt = <1896000>;
regulator-max-microvolt = <2040000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s6a: smps6 {
regulator-name = "vreg_s6a";
regulator-min-microvolt = <1304000>;
regulator-max-microvolt = <1404000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1a: ldo1 {
regulator-name = "vreg_l1a";
regulator-min-microvolt = <488000>;
regulator-max-microvolt = <852000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2a: ldo2 {
regulator-name = "vreg_l2a";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <3100000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3a: ldo3 {
regulator-name = "vreg_l3a";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1248000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5a: ldo5 {
regulator-name = "vreg_l5a";
regulator-min-microvolt = <875000>;
regulator-max-microvolt = <975000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a: ldo7 {
regulator-name = "vreg_l7a";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1900000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8a: ldo8 {
regulator-name = "vreg_l8a";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1350000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10a: ldo10 {
regulator-name = "vreg_l10a";
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11a: ldo11 {
regulator-name = "vreg_l11a";
regulator-min-microvolt = <1232000>;
regulator-max-microvolt = <1260000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12a: ldo12 {
regulator-name = "vreg_l12a";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1890000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13a: ldo13 {
regulator-name = "vreg_l13a";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3230000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15a: ldo15 {
regulator-name = "vreg_l15a";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1904000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16a: ldo16 {
regulator-name = "vreg_l16a";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
regulator-allow-set-load;
regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17a: ldo17 {
regulator-name = "vreg_l17a";
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&gcc {
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
};
&pm8150_gpios {
usb2_en: usb2-en-state {
pins = "gpio10";
function = "normal";
output-enable;
power-source = <0>;
};
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&qupv3_id_0 {
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/qcs615/adsp.mbn";
status = "okay";
};
&remoteproc_cdsp {
firmware-name = "qcom/qcs615/cdsp.mbn";
status = "okay";
};
&rpmhcc {
clocks = <&xo_board_clk>;
};
&sdhc_1 {
pinctrl-0 = <&sdc1_state_on>;
pinctrl-1 = <&sdc1_state_off>;
pinctrl-names = "default", "sleep";
bus-width = <8>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
vmmc-supply = <&vreg_l17a>;
vqmmc-supply = <&vreg_s4a>;
non-removable;
no-sd;
no-sdio;
status = "okay";
};
&sdhc_2 {
pinctrl-0 = <&sdc2_state_on>;
pinctrl-1 = <&sdc2_state_off>;
pinctrl-names = "default", "sleep";
bus-width = <4>;
cd-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vreg_l10a>;
vqmmc-supply = <&vreg_s4a>;
status = "okay";
};
&uart0 {
status = "okay";
};
&usb_1_hsphy {
vdd-supply = <&vreg_l5a>;
vdda-pll-supply = <&vreg_l12a>;
vdda-phy-dpdm-supply = <&vreg_l13a>;
status = "okay";
};
&usb_qmpphy {
vdda-phy-supply = <&vreg_l5a>;
vdda-pll-supply = <&vreg_l12a>;
status = "okay";
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "peripheral";
};
&usb_hsphy_2 {
vdd-supply = <&vreg_l5a>;
vdda-pll-supply = <&vreg_l12a>;
vdda-phy-dpdm-supply = <&vreg_l13a>;
status = "okay";
};
&usb_2 {
status = "okay";
};
&usb_2_dwc3 {
dr_mode = "host";
};
&ufs_mem_hc {
reset-gpios = <&tlmm 123 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l17a>;
vcc-max-microamp = <600000>;
vccq2-supply = <&vreg_s4a>;
vccq2-max-microamp = <600000>;
status = "okay";
};
&ufs_mem_phy {
vdda-phy-supply = <&vreg_l5a>;
vdda-pll-supply = <&vreg_l12a>;
status = "okay";
};
&watchdog {
clocks = <&sleep_clk>;
};
Reference in New Issue View Git Blame Copy Permalink