mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-02 16:44:59 +00:00
134442a04b
Universal Serial Interface (USI) supports three serial protocol like uart, i2c and spi. ExynosAutov920 has 18 instances of USI. Add spi nodes for all the instances. Signed-off-by: Faraz Ata <faraz.ata@samsung.com> Link: https://lore.kernel.org/r/20250613062208.978641-1-faraz.ata@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
1510 lines
42 KiB
Plaintext
1510 lines
42 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Samsung's ExynosAutov920 SoC device tree source
|
|
*
|
|
* Copyright (c) 2023 Samsung Electronics Co., Ltd.
|
|
*
|
|
*/
|
|
|
|
#include <dt-bindings/clock/samsung,exynosautov920.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/soc/samsung,exynos-usi.h>
|
|
|
|
/ {
|
|
compatible = "samsung,exynosautov920";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
|
|
interrupt-parent = <&gic>;
|
|
|
|
aliases {
|
|
pinctrl0 = &pinctrl_alive;
|
|
pinctrl1 = &pinctrl_aud;
|
|
pinctrl2 = &pinctrl_hsi0;
|
|
pinctrl3 = &pinctrl_hsi1;
|
|
pinctrl4 = &pinctrl_hsi2;
|
|
pinctrl5 = &pinctrl_hsi2ufs;
|
|
pinctrl6 = &pinctrl_peric0;
|
|
pinctrl7 = &pinctrl_peric1;
|
|
};
|
|
|
|
arm-pmu {
|
|
compatible = "arm,cortex-a78-pmu";
|
|
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
|
|
xtcxo: clock {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-output-names = "oscclk";
|
|
};
|
|
|
|
cpus: cpus {
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
cpu-map {
|
|
cluster0 {
|
|
core0 {
|
|
cpu = <&cpu0>;
|
|
};
|
|
core1 {
|
|
cpu = <&cpu1>;
|
|
};
|
|
core2 {
|
|
cpu = <&cpu2>;
|
|
};
|
|
core3 {
|
|
cpu = <&cpu3>;
|
|
};
|
|
};
|
|
|
|
cluster1 {
|
|
core0 {
|
|
cpu = <&cpu4>;
|
|
};
|
|
core1 {
|
|
cpu = <&cpu5>;
|
|
};
|
|
core2 {
|
|
cpu = <&cpu6>;
|
|
};
|
|
core3 {
|
|
cpu = <&cpu7>;
|
|
};
|
|
};
|
|
|
|
cluster2 {
|
|
core0 {
|
|
cpu = <&cpu8>;
|
|
};
|
|
core1 {
|
|
cpu = <&cpu9>;
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a78ae";
|
|
reg = <0x0 0x0>;
|
|
enable-method = "psci";
|
|
i-cache-size = <0x10000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>;
|
|
d-cache-size = <0x10000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <256>;
|
|
next-level-cache = <&l2_cache_cl0>;
|
|
};
|
|
|
|
cpu1: cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a78ae";
|
|
reg = <0x0 0x100>;
|
|
enable-method = "psci";
|
|
i-cache-size = <0x10000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>;
|
|
d-cache-size = <0x10000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <256>;
|
|
next-level-cache = <&l2_cache_cl0>;
|
|
};
|
|
|
|
cpu2: cpu@200 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a78ae";
|
|
reg = <0x0 0x200>;
|
|
enable-method = "psci";
|
|
i-cache-size = <0x10000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>;
|
|
d-cache-size = <0x10000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <256>;
|
|
next-level-cache = <&l2_cache_cl0>;
|
|
};
|
|
|
|
cpu3: cpu@300 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a78ae";
|
|
reg = <0x0 0x300>;
|
|
enable-method = "psci";
|
|
i-cache-size = <0x10000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>;
|
|
d-cache-size = <0x10000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <256>;
|
|
next-level-cache = <&l2_cache_cl0>;
|
|
};
|
|
|
|
cpu4: cpu@10000 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a78ae";
|
|
reg = <0x0 0x10000>;
|
|
enable-method = "psci";
|
|
i-cache-size = <0x10000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>;
|
|
d-cache-size = <0x10000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <256>;
|
|
next-level-cache = <&l2_cache_cl1>;
|
|
};
|
|
|
|
cpu5: cpu@10100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a78ae";
|
|
reg = <0x0 0x10100>;
|
|
enable-method = "psci";
|
|
i-cache-size = <0x10000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>;
|
|
d-cache-size = <0x10000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <256>;
|
|
next-level-cache = <&l2_cache_cl1>;
|
|
};
|
|
|
|
cpu6: cpu@10200 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a78ae";
|
|
reg = <0x0 0x10200>;
|
|
enable-method = "psci";
|
|
i-cache-size = <0x10000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>;
|
|
d-cache-size = <0x10000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <256>;
|
|
next-level-cache = <&l2_cache_cl1>;
|
|
};
|
|
|
|
cpu7: cpu@10300 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a78ae";
|
|
reg = <0x0 0x10300>;
|
|
enable-method = "psci";
|
|
i-cache-size = <0x10000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>;
|
|
d-cache-size = <0x10000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <256>;
|
|
next-level-cache = <&l2_cache_cl1>;
|
|
};
|
|
|
|
cpu8: cpu@20000 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a78ae";
|
|
reg = <0x0 0x20000>;
|
|
enable-method = "psci";
|
|
i-cache-size = <0x10000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>;
|
|
d-cache-size = <0x10000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <256>;
|
|
next-level-cache = <&l2_cache_cl2>;
|
|
};
|
|
|
|
cpu9: cpu@20100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a78ae";
|
|
reg = <0x0 0x20100>;
|
|
enable-method = "psci";
|
|
i-cache-size = <0x10000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>;
|
|
d-cache-size = <0x10000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <256>;
|
|
next-level-cache = <&l2_cache_cl2>;
|
|
};
|
|
|
|
l2_cache_cl0: l2-cache0 {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
cache-size = <0x40000>;
|
|
cache-line-size = <64>;
|
|
cache-sets = <512>;
|
|
next-level-cache = <&l3_cache_cl0>;
|
|
};
|
|
|
|
l2_cache_cl1: l2-cache1 {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
cache-size = <0x40000>;
|
|
cache-line-size = <64>;
|
|
cache-sets = <512>;
|
|
next-level-cache = <&l3_cache_cl1>;
|
|
};
|
|
|
|
l2_cache_cl2: l2-cache2 {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
cache-unified;
|
|
cache-size = <0x40000>;
|
|
cache-line-size = <64>;
|
|
cache-sets = <512>;
|
|
next-level-cache = <&l3_cache_cl2>;
|
|
};
|
|
|
|
l3_cache_cl0: l3-cache0 {
|
|
compatible = "cache";
|
|
cache-level = <3>;
|
|
cache-unified;
|
|
cache-size = <0x200000>;/* 2MB L3 cache for cpu cluster-0 */
|
|
cache-line-size = <64>;
|
|
cache-sets = <2048>;
|
|
};
|
|
|
|
l3_cache_cl1: l3-cache1 {
|
|
compatible = "cache";
|
|
cache-level = <3>;
|
|
cache-unified;
|
|
cache-size = <0x200000>;/* 2MB L3 cache for cpu cluster-1 */
|
|
cache-line-size = <64>;
|
|
cache-sets = <2048>;
|
|
};
|
|
|
|
l3_cache_cl2: l3-cache2 {
|
|
compatible = "cache";
|
|
cache-level = <3>;
|
|
cache-unified;
|
|
cache-size = <0x100000>;/* 1MB L3 cache for cpu cluster-2 */
|
|
cache-line-size = <64>;
|
|
cache-sets = <1365>;
|
|
};
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
};
|
|
|
|
soc: soc@0 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x0 0x20000000>;
|
|
|
|
chipid@10000000 {
|
|
compatible = "samsung,exynosautov920-chipid",
|
|
"samsung,exynos850-chipid";
|
|
reg = <0x10000000 0x24>;
|
|
};
|
|
|
|
cmu_misc: clock-controller@10020000 {
|
|
compatible = "samsung,exynosautov920-cmu-misc";
|
|
reg = <0x10020000 0x8000>;
|
|
#clock-cells = <1>;
|
|
|
|
clocks = <&xtcxo>,
|
|
<&cmu_top DOUT_CLKCMU_MISC_NOC>;
|
|
clock-names = "oscclk",
|
|
"noc";
|
|
};
|
|
|
|
watchdog_cl0: watchdog@10060000 {
|
|
compatible = "samsung,exynosautov920-wdt";
|
|
reg = <0x10060000 0x100>;
|
|
interrupts = <GIC_SPI 953 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&xtcxo>, <&xtcxo>;
|
|
clock-names = "watchdog", "watchdog_src";
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
samsung,cluster-index = <0>;
|
|
};
|
|
|
|
watchdog_cl1: watchdog@10070000 {
|
|
compatible = "samsung,exynosautov920-wdt";
|
|
reg = <0x10070000 0x100>;
|
|
interrupts = <GIC_SPI 952 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&xtcxo>, <&xtcxo>;
|
|
clock-names = "watchdog", "watchdog_src";
|
|
samsung,syscon-phandle = <&pmu_system_controller>;
|
|
samsung,cluster-index = <1>;
|
|
};
|
|
|
|
gic: interrupt-controller@10400000 {
|
|
compatible = "arm,gic-v3";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
interrupt-controller;
|
|
reg = <0x10400000 0x10000>,
|
|
<0x10460000 0x140000>;
|
|
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
spdma0: dma-controller@10180000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x10180000 0x1000>;
|
|
interrupts = <GIC_SPI 918 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
spdma1: dma-controller@10190000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x10190000 0x1000>;
|
|
interrupts = <GIC_SPI 917 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
pdma0: dma-controller@101a0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x101a0000 0x1000>;
|
|
interrupts = <GIC_SPI 916 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
pdma1: dma-controller@101b0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x101b0000 0x1000>;
|
|
interrupts = <GIC_SPI 915 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
pdma2: dma-controller@101c0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x101c0000 0x1000>;
|
|
interrupts = <GIC_SPI 914 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
pdma3: dma-controller@101d0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x101d0000 0x1000>;
|
|
interrupts = <GIC_SPI 913 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
pdma4: dma-controller@101e0000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0x101e0000 0x1000>;
|
|
interrupts = <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cmu_misc CLK_MOUT_MISC_NOC_USER>;
|
|
clock-names = "apb_pclk";
|
|
#dma-cells = <1>;
|
|
};
|
|
|
|
cmu_peric0: clock-controller@10800000 {
|
|
compatible = "samsung,exynosautov920-cmu-peric0";
|
|
reg = <0x10800000 0x8000>;
|
|
#clock-cells = <1>;
|
|
|
|
clocks = <&xtcxo>,
|
|
<&cmu_top DOUT_CLKCMU_PERIC0_NOC>,
|
|
<&cmu_top DOUT_CLKCMU_PERIC0_IP>;
|
|
clock-names = "oscclk",
|
|
"noc",
|
|
"ip";
|
|
};
|
|
|
|
syscon_peric0: syscon@10820000 {
|
|
compatible = "samsung,exynosautov920-peric0-sysreg",
|
|
"syscon";
|
|
reg = <0x10820000 0x2000>;
|
|
};
|
|
|
|
pinctrl_peric0: pinctrl@10830000 {
|
|
compatible = "samsung,exynosautov920-pinctrl";
|
|
reg = <0x10830000 0x10000>;
|
|
interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
usi_0: usi@108800c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x108800c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric0 0x1000>;
|
|
samsung,mode = <USI_MODE_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_0: serial@10880000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10880000 0xc0>;
|
|
interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_bus>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <256>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_0: spi@10880000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10880000 0x30>;
|
|
interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_bus &spi0_cs_func>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI00_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma0 1>, <&pdma0 0>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <256>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_1: usi@108a00c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x108a00c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric0 0x1008>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_1: serial@108a0000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x108a0000 0xc0>;
|
|
interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_bus>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <256>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_1: spi@108a0000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x108a0000 0x30>;
|
|
interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1_bus &spi1_cs_func>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI01_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma0 3>, <&pdma0 2>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <256>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_2: usi@108c00c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x108c00c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric0 0x1010>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_2: serial@108c0000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x108c0000 0xc0>;
|
|
interrupts = <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_bus>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_2: spi@108c0000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x108c0000 0x30>;
|
|
interrupts = <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi2_bus &spi2_cs_func>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI02_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma0 5>, <&pdma0 4>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_3: usi@108e00c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x108e00c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric0 0x1018>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_3: serial@108e0000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x108e0000 0xc0>;
|
|
interrupts = <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart3_bus>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_3: spi@108e0000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x108e0000 0x30>;
|
|
interrupts = <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi3_bus &spi3_cs_func>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI03_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma0 7>, <&pdma0 6>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_4: usi@109000c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x109000c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric0 0x1020>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_4: serial@10900000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10900000 0xc0>;
|
|
interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart4_bus>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_4: spi@10900000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10900000 0x30>;
|
|
interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi4_bus &spi4_cs_func>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI04_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma0 9>, <&pdma0 8>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_5: usi@109200c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x109200c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric0 0x1028>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_5: serial@10920000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10920000 0xc0>;
|
|
interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart5_bus>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_5: spi@10920000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10920000 0x30>;
|
|
interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi5_bus &spi5_cs_func>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI05_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma0 11>, <&pdma0 10>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_6: usi@109400c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x109400c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric0 0x1030>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_6: serial@10940000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10940000 0xc0>;
|
|
interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart6_bus>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_6: spi@10940000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10940000 0x30>;
|
|
interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi6_bus &spi6_cs_func>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI06_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma0 13>, <&pdma0 12>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_7: usi@109600c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x109600c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric0 0x1038>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_7: serial@10960000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10960000 0xc0>;
|
|
interrupts = <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart7_bus>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_7: spi@10960000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10960000 0x30>;
|
|
interrupts = <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi7_bus &spi7_cs_func>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI07_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma0 15>, <&pdma0 14>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_8: usi@109800c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x109800c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric0 0x1040>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_8: serial@10980000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10980000 0xc0>;
|
|
interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart8_bus>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_8: spi@10980000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10980000 0x30>;
|
|
interrupts = <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi8_bus &spi8_cs_func>;
|
|
clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
|
|
<&cmu_peric0 CLK_DOUT_PERIC0_USI08_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma0 17>, <&pdma0 16>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
};
|
|
|
|
pwm: pwm@109b0000 {
|
|
compatible = "samsung,exynosautov920-pwm",
|
|
"samsung,exynos4210-pwm";
|
|
reg = <0x109b0000 0x100>;
|
|
samsung,pwm-outputs = <0>, <1>, <2>, <3>;
|
|
#pwm-cells = <3>;
|
|
clocks = <&xtcxo>;
|
|
clock-names = "timers";
|
|
status = "disabled";
|
|
};
|
|
|
|
cmu_peric1: clock-controller@10c00000 {
|
|
compatible = "samsung,exynosautov920-cmu-peric1";
|
|
reg = <0x10c00000 0x8000>;
|
|
#clock-cells = <1>;
|
|
|
|
clocks = <&xtcxo>,
|
|
<&cmu_top DOUT_CLKCMU_PERIC1_NOC>,
|
|
<&cmu_top DOUT_CLKCMU_PERIC1_IP>;
|
|
clock-names = "oscclk",
|
|
"noc",
|
|
"ip";
|
|
};
|
|
|
|
syscon_peric1: syscon@10c20000 {
|
|
compatible = "samsung,exynosautov920-peric1-sysreg",
|
|
"syscon";
|
|
reg = <0x10c20000 0x2000>;
|
|
};
|
|
|
|
pinctrl_peric1: pinctrl@10c30000 {
|
|
compatible = "samsung,exynosautov920-pinctrl";
|
|
reg = <0x10c30000 0x10000>;
|
|
interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
usi_9: usi@10c800c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x10c800c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric1 0x1000>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_9: serial@10c8000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10c80000 0xc0>;
|
|
interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart9_bus>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <256>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_9: spi@10c80000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10c80000 0x30>;
|
|
interrupts = <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi9_bus &spi9_cs_func>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI09_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma1 1>, <&pdma1 0>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <256>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_10: usi@10ca00c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x10ca00c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric1 0x1008>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_10: serial@10ca0000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10ca0000 0xc0>;
|
|
interrupts = <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart10_bus>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_10: spi@10ca0000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10ca0000 0x30>;
|
|
interrupts = <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi10_bus &spi10_cs_func>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI10_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma1 3>, <&pdma1 2>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_11: usi@10cc00c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x10cc00c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric1 0x1010>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_11: serial@10cc0000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10cc0000 0xc0>;
|
|
interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart11_bus>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_11: spi@10cc0000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10cc0000 0x30>;
|
|
interrupts = <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi11_bus &spi11_cs_func>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI11_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma1 5>, <&pdma1 4>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_12: usi@10ce00c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x10ce00c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric1 0x1018>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_12: serial@10ce0000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10ce0000 0xc0>;
|
|
interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart12_bus>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_12: spi@10ce0000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10ce0000 0x30>;
|
|
interrupts = <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi12_bus &spi12_cs_func>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI12_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma1 7>, <&pdma1 6>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_13: usi@10d000c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x10d000c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric1 0x1020>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_13: serial@10d00000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10d00000 0xc0>;
|
|
interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart13_bus>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_13: spi@10d00000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10d00000 0x30>;
|
|
interrupts = <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi13_bus &spi13_cs_func>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI13_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma1 9>, <&pdma1 8>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_14: usi@10d200c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x10d200c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric1 0x1028>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_14: serial@10d20000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10d20000 0xc0>;
|
|
interrupts = <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart14_bus>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_14: spi@10d20000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10d20000 0x30>;
|
|
interrupts = <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi14_bus &spi14_cs_func>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI14_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma1 11>, <&pdma1 10>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_15: usi@10d400c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x10d400c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric1 0x1030>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_15: serial@10d40000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10d40000 0xc0>;
|
|
interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart15_bus>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_15: spi@10d40000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10d40000 0x30>;
|
|
interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi15_bus &spi15_cs_func>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI15_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma1 13>, <&pdma1 12>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_16: usi@10d600c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x10d600c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric1 0x1038>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_16: serial@10d60000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10d60000 0xc0>;
|
|
interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart16_bus>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_16: spi@10d60000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10d60000 0x30>;
|
|
interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi16_bus &spi16_cs_func>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI16_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma1 15>, <&pdma1 14>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
usi_17: usi@10d800c0 {
|
|
compatible = "samsung,exynosautov920-usi",
|
|
"samsung,exynos850-usi";
|
|
reg = <0x10d800c0 0x20>;
|
|
samsung,sysreg = <&syscon_peric1 0x1040>;
|
|
samsung,mode = <USI_V2_UART>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
|
|
clock-names = "pclk", "ipclk";
|
|
status = "disabled";
|
|
|
|
serial_17: serial@10d80000 {
|
|
compatible = "samsung,exynosautov920-uart",
|
|
"samsung,exynos850-uart";
|
|
reg = <0x10d80000 0xc0>;
|
|
interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart17_bus>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
|
|
clock-names = "uart", "clk_uart_baud0";
|
|
samsung,uart-fifosize = <64>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi_17: spi@10d80000 {
|
|
compatible = "samsung,exynosautov920-spi",
|
|
"samsung,exynos850-spi";
|
|
reg = <0x10d80000 0x30>;
|
|
interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi17_bus &spi17_cs_func>;
|
|
clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
|
|
<&cmu_peric1 CLK_DOUT_PERIC1_USI17_USI>;
|
|
clock-names = "spi", "spi_busclk0";
|
|
samsung,spi-src-clk = <0>;
|
|
dmas = <&pdma1 17>, <&pdma1 16>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
fifo-depth = <64>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
cmu_top: clock-controller@11000000 {
|
|
compatible = "samsung,exynosautov920-cmu-top";
|
|
reg = <0x11000000 0x8000>;
|
|
#clock-cells = <1>;
|
|
|
|
clocks = <&xtcxo>;
|
|
clock-names = "oscclk";
|
|
};
|
|
|
|
pinctrl_alive: pinctrl@11850000 {
|
|
compatible = "samsung,exynosautov920-pinctrl";
|
|
reg = <0x11850000 0x10000>;
|
|
|
|
wakeup-interrupt-controller {
|
|
compatible = "samsung,exynosautov920-wakeup-eint";
|
|
};
|
|
};
|
|
|
|
pmu_system_controller: system-controller@11860000 {
|
|
compatible = "samsung,exynosautov920-pmu",
|
|
"samsung,exynos7-pmu","syscon";
|
|
reg = <0x11860000 0x10000>;
|
|
};
|
|
|
|
cmu_hsi0: clock-controller@16000000 {
|
|
compatible = "samsung,exynosautov920-cmu-hsi0";
|
|
reg = <0x16000000 0x8000>;
|
|
#clock-cells = <1>;
|
|
|
|
clocks = <&xtcxo>,
|
|
<&cmu_top DOUT_CLKCMU_HSI0_NOC>;
|
|
clock-names = "oscclk",
|
|
"noc";
|
|
};
|
|
|
|
pinctrl_hsi0: pinctrl@16040000 {
|
|
compatible = "samsung,exynosautov920-pinctrl";
|
|
reg = <0x16040000 0x10000>;
|
|
interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
cmu_hsi1: clock-controller@16400000 {
|
|
compatible = "samsung,exynosautov920-cmu-hsi1";
|
|
reg = <0x16400000 0x8000>;
|
|
#clock-cells = <1>;
|
|
|
|
clocks = <&xtcxo>,
|
|
<&cmu_top DOUT_CLKCMU_HSI1_NOC>,
|
|
<&cmu_top DOUT_CLKCMU_HSI1_USBDRD>,
|
|
<&cmu_top DOUT_CLKCMU_HSI1_MMC_CARD>;
|
|
clock-names = "oscclk",
|
|
"noc",
|
|
"usbdrd",
|
|
"mmc_card";
|
|
};
|
|
|
|
pinctrl_hsi1: pinctrl@16450000 {
|
|
compatible = "samsung,exynosautov920-pinctrl";
|
|
reg = <0x16450000 0x10000>;
|
|
interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
cmu_hsi2: clock-controller@16b00000 {
|
|
compatible = "samsung,exynosautov920-cmu-hsi2";
|
|
reg = <0x16b00000 0x8000>;
|
|
#clock-cells = <1>;
|
|
|
|
clocks = <&xtcxo>,
|
|
<&cmu_top DOUT_CLKCMU_HSI2_NOC>,
|
|
<&cmu_top DOUT_CLKCMU_HSI2_NOC_UFS>,
|
|
<&cmu_top DOUT_CLKCMU_HSI2_UFS_EMBD>,
|
|
<&cmu_top DOUT_CLKCMU_HSI2_ETHERNET>;
|
|
clock-names = "oscclk",
|
|
"noc",
|
|
"ufs",
|
|
"embd",
|
|
"ethernet";
|
|
};
|
|
|
|
pinctrl_hsi2: pinctrl@16c10000 {
|
|
compatible = "samsung,exynosautov920-pinctrl";
|
|
reg = <0x16c10000 0x10000>;
|
|
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
pinctrl_hsi2ufs: pinctrl@16d20000 {
|
|
compatible = "samsung,exynosautov920-pinctrl";
|
|
reg = <0x16d20000 0x10000>;
|
|
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
ufs_0_phy: phy@16e04000 {
|
|
compatible = "samsung,exynosautov920-ufs-phy";
|
|
reg = <0x16e04000 0x4000>;
|
|
reg-names = "phy-pma";
|
|
clocks = <&xtcxo>;
|
|
clock-names = "ref_clk";
|
|
samsung,pmu-syscon = <&pmu_system_controller>;
|
|
#phy-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pinctrl_aud: pinctrl@1a460000 {
|
|
compatible = "samsung,exynosautov920-pinctrl";
|
|
reg = <0x1a460000 0x10000>;
|
|
};
|
|
|
|
cmu_cpucl0: clock-controller@1ec00000 {
|
|
compatible = "samsung,exynosautov920-cmu-cpucl0";
|
|
reg = <0x1ec00000 0x8000>;
|
|
#clock-cells = <1>;
|
|
|
|
clocks = <&xtcxo>,
|
|
<&cmu_top DOUT_CLKCMU_CPUCL0_SWITCH>,
|
|
<&cmu_top DOUT_CLKCMU_CPUCL0_CLUSTER>,
|
|
<&cmu_top DOUT_CLKCMU_CPUCL0_DBG>;
|
|
clock-names = "oscclk",
|
|
"switch",
|
|
"cluster",
|
|
"dbg";
|
|
};
|
|
|
|
cmu_cpucl1: clock-controller@1ed00000 {
|
|
compatible = "samsung,exynosautov920-cmu-cpucl1";
|
|
reg = <0x1ed00000 0x8000>;
|
|
#clock-cells = <1>;
|
|
|
|
clocks = <&xtcxo>,
|
|
<&cmu_top DOUT_CLKCMU_CPUCL1_SWITCH>,
|
|
<&cmu_top DOUT_CLKCMU_CPUCL1_CLUSTER>;
|
|
clock-names = "oscclk",
|
|
"switch",
|
|
"cluster";
|
|
};
|
|
|
|
cmu_cpucl2: clock-controller@1ee00000 {
|
|
compatible = "samsung,exynosautov920-cmu-cpucl2";
|
|
reg = <0x1ee00000 0x8000>;
|
|
#clock-cells = <1>;
|
|
|
|
clocks = <&xtcxo>,
|
|
<&cmu_top DOUT_CLKCMU_CPUCL2_SWITCH>,
|
|
<&cmu_top DOUT_CLKCMU_CPUCL2_CLUSTER>;
|
|
clock-names = "oscclk",
|
|
"switch",
|
|
"cluster";
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
|
|
#include "exynosautov920-pinctrl.dtsi"
|