Proxmox-Port/linux-loongson
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson synced 2025-09-01 15:14:52 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
loongarch-next
linux-loongson/arch/arm/boot/dts/nxp/imx/imx6-logicpd-som.dtsi
Rob Herring 724ba67515 ARM: dts: Move .dts files to vendor sub-directories 
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.

There's no change to dtbs_install as the flat structure is maintained on
install.

The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
  been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
  company (e.g. gemini, nspire)

The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-21 11:39:50 -06:00

370 lines
8.5 KiB
Plaintext
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0
//
// Copyright (C) 2019 Logic PD, Inc.
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
chosen {
stdout-path = &uart1;
};
memory@10000000 {
device_type = "memory";
reg = <0x10000000 0x80000000>;
};
reg_wl18xx_vmmc: regulator-wl18xx {
compatible = "regulator-fixed";
regulator-name = "vwl1837";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
};
&clks {
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
status = "okay";
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
pfuze100: pmic@8 {
compatible = "fsl,pfuze100";
reg = <0x08>;
regulators {
sw1a_reg: sw1ab {
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-name = "vddcore";
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw1c_reg: sw1c {
regulator-min-microvolt = <725000>;
regulator-max-microvolt = <1450000>;
regulator-name = "vddsoc";
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw2_reg: sw2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "gen_3v3";
regulator-boot-on;
};
sw3a_reg: sw3a {
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-name = "sw3a_vddr";
regulator-boot-on;
regulator-always-on;
};
sw3b_reg: sw3b {
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-name = "sw3b_vddr";
regulator-boot-on;
regulator-always-on;
};
sw4_reg: sw4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "gen_rgmii";
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
regulator-name = "gen_5v0";
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "gen_vsns";
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen1_reg: vgen1 {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-name = "gen_1v5";
};
vgen2_reg: vgen2 {
regulator-name = "vgen2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen3_reg: vgen3 {
regulator-name = "gen_vadj_0";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
vgen4_reg: vgen4 {
regulator-name = "gen_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vgen5_reg: vgen5 {
regulator-name = "gen_vadj_1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen6_reg: vgen6 {
regulator-name = "gen_2v5";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
coin_reg: coin {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
};
};
temperature-sensor@49 {
compatible = "ti,tmp102";
reg = <0x49>;
interrupt-parent = <&gpio6>;
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
};
temperature-sensor@4a {
compatible = "ti,tmp102";
reg = <0x4a>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tempsense>;
interrupt-parent = <&gpio6>;
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
};
eeprom@51 {
compatible = "atmel,24c64";
pagesize = <32>;
read-only; /* Manufacturing EEPROM programmed at factory */
reg = <0x51>;
};
eeprom@52 {
compatible = "atmel,24c64";
pagesize = <32>;
reg = <0x52>;
};
};
/* Reroute power feeding the CPU to come from the external PMIC */
&reg_arm
{
vin-supply = <&sw1a_reg>;
};
&reg_soc
{
vin-supply = <&sw1c_reg>;
};
&snvs_poweroff {
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_gpmi_nand: gpmi-nandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1
>;
};
pinctrl_hog: hoggrp {
fsl,pins = < /* Enable ARM Debugger */
MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL 0x1b0b0
MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO 0x1b0b0
MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00 0x1b0b0
MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK 0x1b0b0
MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01 0x1b0b0
MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02 0x1b0b0
MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03 0x1b0b0
MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04 0x1b0b0
MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05 0x1b0b0
MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06 0x1b0b0
MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x1b0b0
MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08 0x1b0b0
MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09 0x1b0b0
MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10 0x1b0b0
MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11 0x1b0b0
MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12 0x1b0b0
MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13 0x1b0b0
MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14 0x1b0b0
MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15 0x1b0b0
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_tempsense: tempsensegrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x13059 /* BT_EN */
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170B9
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100B9
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170B9
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170B9
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170B9
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170B9
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17049
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10049
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17049
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17049
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17049
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17049
MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x130b0 /* WL_IRQ */
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* WLAN_EN */
>;
};
};
&snvs_poweroff {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "ti,wl1837-st";
enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
};
};
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
non-removable;
keep-power-in-suspend;
wakeup-source;
vmmc-supply = <&sw2_reg>;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3>;
non-removable;
cap-power-off-card;
keep-power-in-suspend;
wakeup-source;
vmmc-supply = <&reg_wl18xx_vmmc>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
wlcore: wlcore@2 {
compatible = "ti,wl1837";
reg = <2>;
interrupt-parent = <&gpio7>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
tcxo-clock-frequency = <26000000>;
};
};
Reference in New Issue View Git Blame Copy Permalink