linux-loongson/Documentation/iio/ad3552r.rst
Angelo Dureghello 0b9c738f9c docs: iio: ad3552r: fix malformed table
Fix malformed table.

Fixes: ede84c4556 ("docs: iio: add documentation for ad3552r driver")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250415-wip-bl-ad3552r-fix-doc-table-v1-1-717ffd320c9d@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21 14:19:46 +01:00

73 lines
2.6 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0-only
==============
AD3552R driver
==============
Device driver for Analog Devices Inc. AD35XXR series of DACs. The module name
is ``ad3552r``.
With the same module name, two different driver variants are available, the
``generic spi`` variant, to be used with any classic SPI controllers, and the
``hs`` (high speed) variant, for an ADI ``axi-dac`` (IP core) based controller
that allows to reach the maximum sample rate supported from the DACs, using the
DMA transfer and all the SPI lines available (D/QDSPI)..
The high speed driver variant is intended to be used with the ``adi-axi-dac``
backend support enabled, that is enabled by default when the driver is selected.
Supported devices
=================
* `AD3541R <https://www.analog.com/en/products/ad3541r.html>`_
* `AD3542R <https://www.analog.com/en/products/ad3542r.html>`_
* `AD3551R <https://www.analog.com/en/products/ad3551r.html>`_
* `AD3552R <https://www.analog.com/en/products/ad3552r.html>`_
Wiring connections
==================
Generic SPI
-----------
Use the classic SPI S_CLK/CS/SDO/SDI connection.
High speed (using axi-dac backend)
----------------------------------
::
.-----------------. .-------.
| |--- D/QSPI -----| |
| DAC IP CORE |--- SPI S_CLK --| DAC |
| |--- SPI CS -----| |
| |--- LDAC -------| |
| |--- RESET ------| |
|_________________| |_______|
High speed features
===================
Device attributes
-----------------
The following table shows the ad35xxr related device debug files, found in the
specific debugfs path ``/sys/kernel/debug/iio/iio:deviceX``.
+-----------------------+------------------------------------------------------+
| Debugfs device files | Description |
+-----------------------+------------------------------------------------------+
| data_source | The used data source, as |
| | ``normal``, ``ramp-16bit``, etc. |
+-----------------------+------------------------------------------------------+
| data_source_available | The available data sources. |
+-----------------------+------------------------------------------------------+
Usage examples
--------------
. code-block:: bash
root:/sys/bus/iio/devices/iio:device0# cat data_source
normal
root:/sys/bus/iio/devices/iio:device0# echo -n ramp-16bit > data_source
root:/sys/bus/iio/devices/iio:device0# cat data_source
ramp-16bit