linux-loongson/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
Krzysztof Kozlowski 28b3175105 dt-bindings: thermal: socionext,uniphier: reference thermal-sensor schema
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240705-dt-bindings-thermal-allof-v1-16-554061b52fbc@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2024-07-15 13:31:40 +02:00

56 lines
1.4 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/socionext,uniphier-thermal.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Socionext UniPhier thermal monitor
description: |
This describes the devicetree bindings for thermal monitor supported by
PVT(Process, Voltage and Temperature) monitoring unit implemented on
Socionext UniPhier SoCs.
maintainers:
- Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
$ref: thermal-sensor.yaml#
properties:
compatible:
enum:
- socionext,uniphier-pxs2-thermal
- socionext,uniphier-ld20-thermal
- socionext,uniphier-pxs3-thermal
- socionext,uniphier-nx1-thermal
interrupts:
maxItems: 1
"#thermal-sensor-cells":
const: 0
socionext,tmod-calibration:
$ref: /schemas/types.yaml#/definitions/uint32-array
maxItems: 2
description:
A pair of calibrated values referred from PVT, in case that the values
aren't set on SoC, like a reference board.
required:
- compatible
- interrupts
unevaluatedProperties: false
examples:
- |
// The UniPhier thermal should be a subnode of a "syscon" compatible node.
#include <dt-bindings/interrupt-controller/arm-gic.h>
pvtctl: thermal-sensor {
compatible = "socionext,uniphier-ld20-thermal";
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
#thermal-sensor-cells = <0>;
};