mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-02 08:32:55 +00:00
5c7e4c4da8
The wm8960 codec may be used with audio graph card and thus may require an additional property: 'port'. Add it. Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20250207163029.3365-1-laurentiumihalcea111@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
113 lines
2.8 KiB
YAML
113 lines
2.8 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/sound/wlf,wm8960.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Wolfson WM8960 audio codec
|
|
|
|
maintainers:
|
|
- patches@opensource.cirrus.com
|
|
|
|
properties:
|
|
compatible:
|
|
const: wlf,wm8960
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
items:
|
|
- const: mclk
|
|
|
|
'#sound-dai-cells':
|
|
const: 0
|
|
|
|
AVDD-supply:
|
|
description: Analogue supply.
|
|
|
|
DBVDD-supply:
|
|
description: Digital Buffer Supply.
|
|
|
|
DCVDD-supply:
|
|
description: Digital Core Supply.
|
|
|
|
SPKVDD1-supply:
|
|
description: Supply for speaker drivers 1.
|
|
|
|
SPKVDD2-supply:
|
|
description: Supply for speaker drivers 2.
|
|
|
|
wlf,capless:
|
|
type: boolean
|
|
description:
|
|
If present, OUT3 pin will be enabled and disabled together with HP_L and
|
|
HP_R pins in response to jack detect events.
|
|
|
|
wlf,gpio-cfg:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
maxItems: 2
|
|
description: |
|
|
A list of GPIO configuration register values.
|
|
- gpio-cfg[0]: ALRCGPIO of R9 (Audio interface)
|
|
- gpio-cfg[1]: {GPIOPOL:GPIOSEL[2:0]} of R48 (Additional Control 4).
|
|
|
|
wlf,hp-cfg:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
maxItems: 3
|
|
description: |
|
|
A list of headphone jack detect configuration register values:
|
|
- hp-cfg[0]: HPSEL[1:0] of R48 (Additional Control 4).
|
|
- hp-cfg[1]: {HPSWEN:HPSWPOL} of R24 (Additional Control 2).
|
|
- hp-cfg[2]: {TOCLKSEL:TOEN} of R23 (Additional Control 1).
|
|
|
|
wlf,shared-lrclk:
|
|
type: boolean
|
|
description:
|
|
If present, the LRCM bit of R24 (Additional control 2) gets set,
|
|
indicating that ADCLRC and DACLRC pins will be disabled only when ADC
|
|
(Left and Right) and DAC (Left and Right) are disabled.
|
|
When WM8960 works on synchronize mode and DACLRC pin is used to supply
|
|
frame clock, it will no frame clock for captrue unless enable DAC to
|
|
enable DACLRC pin. If shared-lrclk is present, no need to enable DAC for
|
|
captrue.
|
|
|
|
port:
|
|
$ref: audio-graph-port.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
allOf:
|
|
- $ref: dai-common.yaml#
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
audio-codec@1a {
|
|
compatible = "wlf,wm8960";
|
|
reg = <0x1a>;
|
|
clocks = <&clks 0>;
|
|
clock-names = "mclk";
|
|
#sound-dai-cells = <0>;
|
|
wlf,hp-cfg = <3 2 3>;
|
|
wlf,gpio-cfg = <1 3>;
|
|
wlf,shared-lrclk;
|
|
DCVDD-supply = <®_audio>;
|
|
DBVDD-supply = <®_audio>;
|
|
AVDD-supply = <®_audio>;
|
|
SPKVDD1-supply = <®_audio>;
|
|
SPKVDD2-supply = <®_audio>;
|
|
};
|
|
};
|