mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-05 20:30:41 +00:00
791d3ef2e1
'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
53 lines
1.4 KiB
Plaintext
53 lines
1.4 KiB
Plaintext
|
|
IBM Akebono board device tree
|
|
=============================
|
|
|
|
The IBM Akebono board is a development board for the PPC476GTR SoC.
|
|
|
|
0) The root node
|
|
|
|
Required properties:
|
|
|
|
- model : "ibm,akebono".
|
|
- compatible : "ibm,akebono" , "ibm,476gtr".
|
|
|
|
1.a) The Secure Digital Host Controller Interface (SDHCI) node
|
|
|
|
Represent the Secure Digital Host Controller Interfaces.
|
|
|
|
Required properties:
|
|
|
|
- compatible : should be "ibm,476gtr-sdhci","generic-sdhci".
|
|
- reg : should contain the SDHCI registers location and length.
|
|
- interrupts : should contain the SDHCI interrupt.
|
|
|
|
1.b) The Advanced Host Controller Interface (AHCI) SATA node
|
|
|
|
Represents the advanced host controller SATA interface.
|
|
|
|
Required properties:
|
|
|
|
- compatible : should be "ibm,476gtr-ahci".
|
|
- reg : should contain the AHCI registers location and length.
|
|
- interrupts : should contain the AHCI interrupt.
|
|
|
|
1.c) The FPGA node
|
|
|
|
The Akebono board stores some board information such as the revision
|
|
number in an FPGA which is represented by this node.
|
|
|
|
Required properties:
|
|
|
|
- compatible : should be "ibm,akebono-fpga".
|
|
- reg : should contain the FPGA registers location and length.
|
|
|
|
1.d) The AVR node
|
|
|
|
The Akebono board has an Atmel AVR microprocessor attached to the I2C
|
|
bus as a power controller for the board.
|
|
|
|
Required properties:
|
|
|
|
- compatible : should be "ibm,akebono-avr".
|
|
- reg : should contain the I2C bus address for the AVR.
|