mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-05 20:30:41 +00:00
e62fc18213
Just as unevaluatedProperties or additionalProperties are required at the top level of schemas, they should (and will) also be required for child node schemas. That ensures only documented properties are present. Add unevaluatedProperties or additionalProperties as appropriate, and then add any missing properties flagged by the addition. Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Lee Jones <lee@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230124230228.372305-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
91 lines
2.0 KiB
YAML
91 lines
2.0 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/power/supply/ti,lp8727.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: TI/National Semiconductor LP8727 Charger
|
|
|
|
maintainers:
|
|
- Sebastian Reichel <sre@kernel.org>
|
|
|
|
allOf:
|
|
- $ref: power-supply.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: ti,lp8727
|
|
|
|
reg:
|
|
const: 0x27
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
debounce-ms:
|
|
description: interrupt debounce time in ms
|
|
|
|
patternProperties:
|
|
'^(ac|usb)$':
|
|
type: object
|
|
additionalProperties: false
|
|
description: USB/AC charging parameters
|
|
properties:
|
|
charger-type:
|
|
enum:
|
|
- ac
|
|
- usb
|
|
|
|
eoc-level:
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
minimum: 0
|
|
maximum: 6
|
|
description: |
|
|
End of Charge Percentage with the following mapping:
|
|
0 = 5%, 1 = 10%, 2 = 16%, 3 = 20%, 4 = 25%, 5 = 33%, 6 = 50%
|
|
|
|
charging-current:
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
minimum: 0
|
|
maximum: 9
|
|
description: |
|
|
Charging current with the following mapping:
|
|
0 = 90mA, 1 = 100mA, 2 = 400mA, 3 = 450mA, 4 = 500mA, 5 = 600mA,
|
|
6 = 700mA, 7 = 800mA, 8 = 900mA, 9 = 1000mA
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
lp8727: charger@27 {
|
|
compatible = "ti,lp8727";
|
|
reg = <0x27>;
|
|
interrupt-parent = <&gpio5>;
|
|
interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
|
|
debounce-ms = <300>;
|
|
|
|
/* AC charger: 5% EOC and 500mA charging current */
|
|
ac {
|
|
charger-type = "ac";
|
|
eoc-level = /bits/ 8 <0>;
|
|
charging-current = /bits/ 8 <4>;
|
|
};
|
|
|
|
/* USB charger: 10% EOC and 400mA charging current */
|
|
usb {
|
|
charger-type = "usb";
|
|
eoc-level = /bits/ 8 <1>;
|
|
charging-current = /bits/ 8 <2>;
|
|
};
|
|
};
|
|
};
|