mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-05 20:30:41 +00:00
20a72af11f
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
67 lines
1.8 KiB
YAML
67 lines
1.8 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: LTC2941, LTC2942, LTC2943 and LTC2944 battery fuel gauges
|
|
|
|
description: |
|
|
All chips measure battery capacity.
|
|
The LTC2942 is pin compatible with the LTC2941, it adds voltage and
|
|
temperature monitoring, and is runtime detected. LTC2943 and LTC2944
|
|
are software compatible, uses a slightly different conversion formula
|
|
for the charge counter and adds voltage, current and temperature monitoring.
|
|
|
|
maintainers:
|
|
- Sebastian Reichel <sre@kernel.org>
|
|
|
|
allOf:
|
|
- $ref: power-supply.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- lltc,ltc2941
|
|
- lltc,ltc2942
|
|
- lltc,ltc2943
|
|
- lltc,ltc2944
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
lltc,resistor-sense:
|
|
$ref: /schemas/types.yaml#/definitions/int32
|
|
description: |
|
|
Sense resistor value in milli-ohms.
|
|
Can be negative value when the battery has been connected to the wrong end of the resistor.
|
|
|
|
lltc,prescaler-exponent:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: |
|
|
The prescaler exponent as explained in the datasheet.
|
|
This determines the range and accuracy of the gauge.
|
|
The value is programmed into the chip only if it differs from the current setting.
|
|
The setting is lost when the battery is disconnected.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- lltc,resistor-sense
|
|
- lltc,prescaler-exponent
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
battery@64 {
|
|
compatible = "lltc,ltc2943";
|
|
reg = <0x64>;
|
|
lltc,resistor-sense = <15>;
|
|
lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
|
|
};
|
|
};
|