mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-28 18:10:32 +00:00
070d546258
Several Rockchip PHYs use the "phy-supply" property, but don't document it. Add it to the current known users. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250407165607.2937088-1-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
117 lines
2.5 KiB
YAML
117 lines
2.5 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/phy/rockchip,pcie3-phy.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Rockchip PCIe v3 phy
|
|
|
|
maintainers:
|
|
- Heiko Stuebner <heiko@sntech.de>
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- rockchip,rk3568-pcie3-phy
|
|
- rockchip,rk3588-pcie3-phy
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
minItems: 1
|
|
maxItems: 3
|
|
|
|
clock-names:
|
|
minItems: 1
|
|
maxItems: 3
|
|
|
|
data-lanes:
|
|
description: which lanes (by position) should be mapped to which
|
|
controller (value). 0 means lane disabled, higher value means used.
|
|
(controller-number +1 )
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
minItems: 2
|
|
maxItems: 16
|
|
items:
|
|
minimum: 0
|
|
maximum: 16
|
|
|
|
"#phy-cells":
|
|
const: 0
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
reset-names:
|
|
const: phy
|
|
|
|
phy-supply:
|
|
description: Single PHY regulator
|
|
|
|
rockchip,phy-grf:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description: phandle to the syscon managing the phy "general register files"
|
|
|
|
rockchip,pipe-grf:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description: phandle to the syscon managing the pipe "general register files"
|
|
|
|
rockchip,rx-common-refclk-mode:
|
|
description: which lanes (by position) should be configured to run in
|
|
RX common reference clock mode. 0 means disabled, 1 means enabled.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
minItems: 1
|
|
maxItems: 16
|
|
items:
|
|
minimum: 0
|
|
maximum: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- rockchip,phy-grf
|
|
- "#phy-cells"
|
|
|
|
allOf:
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- rockchip,rk3588-pcie3-phy
|
|
then:
|
|
properties:
|
|
clocks:
|
|
maxItems: 1
|
|
clock-names:
|
|
items:
|
|
- const: pclk
|
|
else:
|
|
properties:
|
|
clocks:
|
|
minItems: 3
|
|
|
|
clock-names:
|
|
items:
|
|
- const: refclk_m
|
|
- const: refclk_n
|
|
- const: pclk
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/rk3568-cru.h>
|
|
pcie30phy: phy@fe8c0000 {
|
|
compatible = "rockchip,rk3568-pcie3-phy";
|
|
reg = <0xfe8c0000 0x20000>;
|
|
#phy-cells = <0>;
|
|
clocks = <&pmucru CLK_PCIE30PHY_REF_M>,
|
|
<&pmucru CLK_PCIE30PHY_REF_N>,
|
|
<&cru PCLK_PCIE30PHY>;
|
|
clock-names = "refclk_m", "refclk_n", "pclk";
|
|
resets = <&cru SRST_PCIE30PHY>;
|
|
reset-names = "phy";
|
|
rockchip,phy-grf = <&pcie30_phy_grf>;
|
|
};
|