mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-02 08:32:55 +00:00
02ec75edaa
access-controllers is an optional property that allows a peripheral to refer to one or more domain access controller(s). Description of this property is added to all peripheral binding files of the peripheral under the STM32 firewall controller. It allows an accurate representation of the hardware, where various peripherals are connected to a firewall bus. The firewall can then check the peripheral accesses before allowing its device to probe. Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
173 lines
4.5 KiB
YAML
173 lines
4.5 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Bosch MCAN controller
|
|
|
|
description: Bosch MCAN controller for CAN bus
|
|
|
|
maintainers:
|
|
- Chandrasekar Ramakrishnan <rcsekar@samsung.com>
|
|
|
|
allOf:
|
|
- $ref: can-controller.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: bosch,m_can
|
|
|
|
reg:
|
|
items:
|
|
- description: M_CAN registers map
|
|
- description: message RAM
|
|
|
|
reg-names:
|
|
items:
|
|
- const: m_can
|
|
- const: message_ram
|
|
|
|
interrupts:
|
|
items:
|
|
- description: interrupt line0
|
|
- description: interrupt line1
|
|
minItems: 1
|
|
|
|
interrupt-names:
|
|
items:
|
|
- const: int0
|
|
- const: int1
|
|
minItems: 1
|
|
|
|
clocks:
|
|
items:
|
|
- description: peripheral clock
|
|
- description: bus clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: hclk
|
|
- const: cclk
|
|
|
|
bosch,mram-cfg:
|
|
description: |
|
|
Message RAM configuration data.
|
|
Multiple M_CAN instances can share the same Message RAM
|
|
and each element(e.g Rx FIFO or Tx Buffer and etc) number
|
|
in Message RAM is also configurable, so this property is
|
|
telling driver how the shared or private Message RAM are
|
|
used by this M_CAN controller.
|
|
|
|
The format should be as follows:
|
|
<offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems>
|
|
The 'offset' is an address offset of the Message RAM where
|
|
the following elements start from. This is usually set to
|
|
0x0 if you're using a private Message RAM. The remain cells
|
|
are used to specify how many elements are used for each FIFO/Buffer.
|
|
|
|
M_CAN includes the following elements according to user manual:
|
|
11-bit Filter 0-128 elements / 0-128 words
|
|
29-bit Filter 0-64 elements / 0-128 words
|
|
Rx FIFO 0 0-64 elements / 0-1152 words
|
|
Rx FIFO 1 0-64 elements / 0-1152 words
|
|
Rx Buffers 0-64 elements / 0-1152 words
|
|
Tx Event FIFO 0-32 elements / 0-64 words
|
|
Tx Buffers 0-32 elements / 0-576 words
|
|
|
|
Please refer to 2.4.1 Message RAM Configuration in Bosch
|
|
M_CAN user manual for details.
|
|
$ref: /schemas/types.yaml#/definitions/int32-array
|
|
items:
|
|
- description: The 'offset' is an address offset of the Message RAM where
|
|
the following elements start from. This is usually set to 0x0 if
|
|
you're using a private Message RAM.
|
|
default: 0
|
|
- description: 11-bit Filter 0-128 elements / 0-128 words
|
|
minimum: 0
|
|
maximum: 128
|
|
- description: 29-bit Filter 0-64 elements / 0-128 words
|
|
minimum: 0
|
|
maximum: 64
|
|
- description: Rx FIFO 0 0-64 elements / 0-1152 words
|
|
minimum: 0
|
|
maximum: 64
|
|
- description: Rx FIFO 1 0-64 elements / 0-1152 words
|
|
minimum: 0
|
|
maximum: 64
|
|
- description: Rx Buffers 0-64 elements / 0-1152 words
|
|
minimum: 0
|
|
maximum: 64
|
|
- description: Tx Event FIFO 0-32 elements / 0-64 words
|
|
minimum: 0
|
|
maximum: 32
|
|
- description: Tx Buffers 0-32 elements / 0-576 words
|
|
minimum: 0
|
|
maximum: 32
|
|
minItems: 1
|
|
|
|
power-domains:
|
|
description:
|
|
Power domain provider node and an args specifier containing
|
|
the can device id value.
|
|
maxItems: 1
|
|
|
|
can-transceiver:
|
|
$ref: can-transceiver.yaml#
|
|
|
|
phys:
|
|
maxItems: 1
|
|
|
|
access-controllers:
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- reg-names
|
|
- clocks
|
|
- clock-names
|
|
- bosch,mram-cfg
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
// Example with interrupts
|
|
#include <dt-bindings/clock/imx6sx-clock.h>
|
|
can@20e8000 {
|
|
compatible = "bosch,m_can";
|
|
reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
|
|
reg-names = "m_can", "message_ram";
|
|
interrupts = <0 114 0x04>, <0 114 0x04>;
|
|
interrupt-names = "int0", "int1";
|
|
clocks = <&clks IMX6SX_CLK_CANFD>,
|
|
<&clks IMX6SX_CLK_CANFD>;
|
|
clock-names = "hclk", "cclk";
|
|
bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
|
|
|
|
can-transceiver {
|
|
max-bitrate = <5000000>;
|
|
};
|
|
};
|
|
|
|
- |
|
|
// Example with timer polling
|
|
#include <dt-bindings/clock/imx6sx-clock.h>
|
|
can@20e8000 {
|
|
compatible = "bosch,m_can";
|
|
reg = <0x020e8000 0x4000>, <0x02298000 0x4000>;
|
|
reg-names = "m_can", "message_ram";
|
|
clocks = <&clks IMX6SX_CLK_CANFD>,
|
|
<&clks IMX6SX_CLK_CANFD>;
|
|
clock-names = "hclk", "cclk";
|
|
bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>;
|
|
|
|
can-transceiver {
|
|
max-bitrate = <5000000>;
|
|
};
|
|
};
|
|
|
|
...
|