linux-loongson/Documentation/devicetree/bindings/media/i2c/ti,tvp7002.txt
David Heidelberg 59b24c0047 media: dt-bindings: media: i2c: align filenames format with standard
Append missing vendor and align with other sony definitions.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-04-25 10:15:02 +02:00

54 lines
1.4 KiB
Plaintext

* Texas Instruments TV7002 video decoder
The TVP7002 device supports digitizing of video and graphics signal in RGB and
YPbPr color space.
Required Properties :
- compatible : Must be "ti,tvp7002"
Optional Properties:
- hsync-active: HSYNC Polarity configuration for the bus. Default value when
this property is not specified is <0>.
- vsync-active: VSYNC Polarity configuration for the bus. Default value when
this property is not specified is <0>.
- pclk-sample: Clock polarity of the bus. Default value when this property is
not specified is <0>.
- sync-on-green-active: Active state of Sync-on-green signal property of the
endpoint.
0 = Normal Operation (Active Low, Default)
1 = Inverted operation
- field-even-active: Active-high Field ID output polarity control of the bus.
Under normal operation, the field ID output is set to logic 1 for an odd field
(field 1) and set to logic 0 for an even field (field 0).
0 = Normal Operation (Active Low, Default)
1 = FID output polarity inverted
For further reading of port node refer Documentation/devicetree/bindings/media/
video-interfaces.txt.
Example:
i2c0@1c22000 {
...
...
tvp7002@5c {
compatible = "ti,tvp7002";
reg = <0x5c>;
port {
tvp7002_1: endpoint {
hsync-active = <1>;
vsync-active = <1>;
pclk-sample = <0>;
sync-on-green-active = <1>;
field-even-active = <0>;
};
};
};
...
};