mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-06 13:09:58 +00:00
fba4aa0831
Also update MAINTAINERS file accordingly. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
134 lines
3.1 KiB
YAML
134 lines
3.1 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
# Copyright (c) 2025 STMicroelectronics SA.
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/st,vd55g1.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: STMicroelectronics VD55G1 Global Shutter Image Sensor
|
|
|
|
maintainers:
|
|
- Benjamin Mugnier <benjamin.mugnier@foss.st.com>
|
|
- Sylvain Petinot <sylvain.petinot@foss.st.com>
|
|
|
|
description: |-
|
|
The STMicroelectronics VD55G1 is a global shutter image sensor with an active
|
|
array size of 804H x 704V. It is programmable through I2C interface. The I2C
|
|
address is fixed to 0x10.
|
|
|
|
Image data is sent through MIPI CSI-2, which is configured as only 1 data
|
|
lane. The sensor provides 4 GPIOS that can be used for external LED signal
|
|
(synchronized with sensor integration periods).
|
|
|
|
allOf:
|
|
- $ref: /schemas/media/video-interface-devices.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: st,vd55g1
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
vcore-supply:
|
|
description: Digital core power supply (1.15V)
|
|
|
|
vddio-supply:
|
|
description: Digital IO power supply (1.8V)
|
|
|
|
vana-supply:
|
|
description: Analog power supply (2.8V)
|
|
|
|
reset-gpios:
|
|
description: Sensor reset active low GPIO (XSHUTDOWN)
|
|
maxItems: 1
|
|
|
|
st,leds:
|
|
description:
|
|
List sensor's GPIOs used to control strobe light sources during exposure
|
|
time. The numbers identify the sensor pin on which the illumination
|
|
system is connected. GPIOs are active-high.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
minItems: 1
|
|
maxItems: 4
|
|
items:
|
|
minimum: 0
|
|
maximum: 3
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
additionalProperties: false
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
data-lanes:
|
|
items:
|
|
- const: 1
|
|
|
|
link-frequencies:
|
|
maxItems: 1
|
|
items:
|
|
minimum: 125000000
|
|
maximum: 600000000
|
|
|
|
lane-polarities:
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
required:
|
|
- data-lanes
|
|
- link-frequencies
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- vcore-supply
|
|
- vddio-supply
|
|
- vana-supply
|
|
- reset-gpios
|
|
- port
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
camera-sensor@10 {
|
|
compatible = "st,vd55g1";
|
|
reg = <0x10>;
|
|
|
|
clocks = <&camera_clk_12M>;
|
|
|
|
vcore-supply = <&camera_vcore_v1v15>;
|
|
vddio-supply = <&camera_vddio_v1v8>;
|
|
vana-supply = <&camera_vana_v2v8>;
|
|
|
|
reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
|
|
st,leds = <2>;
|
|
|
|
orientation = <2>;
|
|
rotation = <0>;
|
|
|
|
port {
|
|
endpoint {
|
|
data-lanes = <1>;
|
|
link-frequencies = /bits/ 64 <600000000>;
|
|
remote-endpoint = <&csiphy0_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|