mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-05 20:30:41 +00:00
a3461f73f6
Remove extraneous assigned-clock* from media/i2c/* schemas. assigned-clock and assigned-clock-parent assume that there is a clock that can be assigned and/or a clock parent that similarly can be assigned by firmware which may not always be the case. The sensor properties themselves should not mandate assigned-clock* as a result. Link: https://lore.kernel.org/linux-media/j7kgz2lyxnler5qwd7yiazdq6fmsv77kyozdrxf33h54ydakjz@uqjhwhoyv6re Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
95 lines
2.0 KiB
YAML
95 lines
2.0 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
# Copyright (C) 2021 Intel Corporation
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/sony,imx412.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Sony IMX412 Sensor
|
|
|
|
maintainers:
|
|
- Paul J. Murphy <paul.j.murphy@intel.com>
|
|
- Daniele Alessandrelli <daniele.alessandrelli@intel.com>
|
|
|
|
description:
|
|
IMX412 sensor is a Sony CMOS active pixel digital image sensor with an active
|
|
array size of 4072H x 3176V. It is programmable through I2C interface. The
|
|
I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
|
|
sent through MIPI CSI-2.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- sony,imx412
|
|
- sony,imx577
|
|
reg:
|
|
description: I2C address
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
description: Clock frequency 6MHz, 12MHz, 18MHz, 24MHz or 27MHz
|
|
maxItems: 1
|
|
|
|
dovdd-supply:
|
|
description: Interface power supply.
|
|
|
|
avdd-supply:
|
|
description: Analog power supply.
|
|
|
|
dvdd-supply:
|
|
description: Digital power supply.
|
|
|
|
reset-gpios:
|
|
description: Reference to the GPIO connected to the XCLR pin, if any.
|
|
maxItems: 1
|
|
|
|
port:
|
|
additionalProperties: false
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
data-lanes: true
|
|
link-frequencies: true
|
|
|
|
required:
|
|
- data-lanes
|
|
- link-frequencies
|
|
|
|
required:
|
|
- endpoint
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- port
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
camera@1a {
|
|
compatible = "sony,imx412";
|
|
reg = <0x1a>;
|
|
clocks = <&imx412_clk>;
|
|
|
|
port {
|
|
imx412: endpoint {
|
|
remote-endpoint = <&cam>;
|
|
data-lanes = <1 2 3 4>;
|
|
link-frequencies = /bits/ 64 <600000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
...
|