mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-05 11:53:41 +00:00

Append missing vendor and align with other sony definitions. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
42 lines
1.3 KiB
Plaintext
42 lines
1.3 KiB
Plaintext
* Aptina 1/3-Inch WVGA CMOS Digital Image Sensor
|
|
|
|
The Aptina MT9V032 is a 1/3-inch CMOS active pixel digital image sensor with
|
|
an active array size of 752H x 480V. It is programmable through a simple
|
|
two-wire serial interface.
|
|
|
|
Required Properties:
|
|
|
|
- compatible: value should be either one among the following
|
|
(a) "aptina,mt9v022" for MT9V022 color sensor
|
|
(b) "aptina,mt9v022m" for MT9V022 monochrome sensor
|
|
(c) "aptina,mt9v024" for MT9V024 color sensor
|
|
(d) "aptina,mt9v024m" for MT9V024 monochrome sensor
|
|
(e) "aptina,mt9v032" for MT9V032 color sensor
|
|
(f) "aptina,mt9v032m" for MT9V032 monochrome sensor
|
|
(g) "aptina,mt9v034" for MT9V034 color sensor
|
|
(h) "aptina,mt9v034m" for MT9V034 monochrome sensor
|
|
|
|
Optional Properties:
|
|
|
|
- link-frequencies: List of allowed link frequencies in Hz. Each frequency is
|
|
expressed as a 64-bit big-endian integer.
|
|
- reset-gpios: GPIO handle which is connected to the reset pin of the chip.
|
|
- standby-gpios: GPIO handle which is connected to the standby pin of the chip.
|
|
|
|
For further reading on port node refer to
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
|
|
|
Example:
|
|
|
|
mt9v032@5c {
|
|
compatible = "aptina,mt9v032";
|
|
reg = <0x5c>;
|
|
|
|
port {
|
|
mt9v032_out: endpoint {
|
|
link-frequencies = /bits/ 64
|
|
<13000000 26600000 27000000>;
|
|
};
|
|
};
|
|
};
|