linux-loongson/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
Paul Kocialkowski f45b2949b1 clk: sunxi-ng: v3s: Fix CSI SCLK clock name
The CSI SCLK clock is incorrectly called CSI1 SCLK while it is used for
both the CSI0 and CSI1 interfaces and is called CSI SCLK all around the
documentation.

Fix the name in the driver, header and device-tree.

Fixes: d0f11d14b0 ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-By: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20250701201124.812882-3-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2025-07-03 23:31:04 +08:00

102 lines
2.0 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-isp.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A31 Image Signal Processor Driver (ISP)
maintainers:
- Paul Kocialkowski <paul.kocialkowski@bootlin.com>
properties:
compatible:
enum:
- allwinner,sun6i-a31-isp
- allwinner,sun8i-v3s-isp
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
items:
- description: Bus Clock
- description: Module Clock
- description: DRAM Clock
clock-names:
items:
- const: bus
- const: mod
- const: ram
resets:
maxItems: 1
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/properties/port
description: CSI0 input port
port@1:
$ref: /schemas/graph.yaml#/properties/port
description: CSI1 input port
if:
properties:
compatible:
contains:
enum:
- allwinner,sun8i-v3s-isp
then:
required:
- port@0
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- resets
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-v3s-ccu.h>
#include <dt-bindings/reset/sun8i-v3s-ccu.h>
isp: isp@1cb8000 {
compatible = "allwinner,sun8i-v3s-isp";
reg = <0x01cb8000 0x1000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_CSI>,
<&ccu CLK_CSI_SCLK>,
<&ccu CLK_DRAM_CSI>;
clock-names = "bus", "mod", "ram";
resets = <&ccu RST_BUS_CSI>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
isp_in_csi0: endpoint {
remote-endpoint = <&csi0_out_isp>;
};
};
};
};
...