mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-04 18:49:41 +00:00
4e12e55093
Convert binding doc ad7879.txt to yaml format. Additional change: - Add ref to /schemas/spi/spi-peripheral-props.yaml - Add #gpio-cell - Remove spi-cpol and spi-cpha in example, the place hold 'spi' can't correct detect spi-controler.yaml. So these two properties can't be recongnized. Fix warning: arch/arm64/boot/dts/freescale/imx8dx-colibri-aster.dtb: /bus@5a000000/i2c@5a800000/touchscreen@2c: failed to match any schema with compatible: ['adi,ad7879-1'] Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240810143840.3615450-1-Frank.Li@nxp.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
151 lines
3.8 KiB
YAML
151 lines
3.8 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/input/touchscreen/adi,ad7879.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C)
|
|
|
|
maintainers:
|
|
- Frank Li <Frank.Li@nxp.com>
|
|
|
|
properties:
|
|
compatible:
|
|
description: |
|
|
for SPI slave, use "adi,ad7879"
|
|
for I2C slave, use "adi,ad7879-1"
|
|
enum:
|
|
- adi,ad7879
|
|
- adi,ad7879-1
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
touchscreen-max-pressure:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: maximum reported pressure
|
|
|
|
adi,resistance-plate-x:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: total resistance of X-plate (for pressure calculation)
|
|
|
|
touchscreen-swapped-x-y:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description: X and Y axis are swapped (boolean)
|
|
|
|
adi,first-conversion-delay:
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
default: 0
|
|
minimum: 0
|
|
maximum: 15
|
|
description: |
|
|
0-12: In 128us steps (starting with 128us)
|
|
13 : 2.560ms
|
|
14 : 3.584ms
|
|
15 : 4.096ms
|
|
This property has to be a '/bits/ 8' value
|
|
|
|
adi,acquisition-time:
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
default: 0
|
|
enum: [0, 1, 2, 3]
|
|
description: |
|
|
0: 2us
|
|
1: 4us
|
|
2: 8us
|
|
3: 16us
|
|
This property has to be a '/bits/ 8' value
|
|
|
|
adi,median-filter-size:
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
default: 0
|
|
enum: [0, 1, 2, 3]
|
|
description: |
|
|
0: disabled
|
|
1: 4 measurements
|
|
2: 8 measurements
|
|
3: 16 measurements
|
|
This property has to be a '/bits/ 8' value
|
|
|
|
adi,averaging:
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
default: 0
|
|
enum: [0, 1, 2, 3]
|
|
description: |
|
|
0: 2 middle values (1 if median disabled)
|
|
1: 4 middle values
|
|
2: 8 middle values
|
|
3: 16 values
|
|
This property has to be a '/bits/ 8' value
|
|
|
|
adi,conversion-interval:
|
|
$ref: /schemas/types.yaml#/definitions/uint8
|
|
default: 0
|
|
description: |
|
|
0 : convert one time only
|
|
1-255: 515us + val * 35us (up to 9.440ms)
|
|
This property has to be a '/bits/ 8' value
|
|
|
|
gpio-controller: true
|
|
|
|
"#gpio-cells":
|
|
const: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
allOf:
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
touchscreen0@2c {
|
|
compatible = "adi,ad7879-1";
|
|
reg = <0x2c>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
|
touchscreen-max-pressure = <4096>;
|
|
adi,resistance-plate-x = <120>;
|
|
adi,first-conversion-delay = /bits/ 8 <3>;
|
|
adi,acquisition-time = /bits/ 8 <1>;
|
|
adi,median-filter-size = /bits/ 8 <2>;
|
|
adi,averaging = /bits/ 8 <1>;
|
|
adi,conversion-interval = /bits/ 8 <255>;
|
|
};
|
|
};
|
|
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
touchscreen1@1 {
|
|
compatible = "adi,ad7879";
|
|
reg = <1>;
|
|
spi-max-frequency = <5000000>;
|
|
gpio-controller;
|
|
#gpio-cells = <1>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
|
|
touchscreen-max-pressure = <4096>;
|
|
adi,resistance-plate-x = <120>;
|
|
adi,first-conversion-delay = /bits/ 8 <3>;
|
|
adi,acquisition-time = /bits/ 8 <1>;
|
|
adi,median-filter-size = /bits/ 8 <2>;
|
|
adi,averaging = /bits/ 8 <1>;
|
|
adi,conversion-interval = /bits/ 8 <255>;
|
|
};
|
|
};
|