Proxmox-Port/linux-loongson
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson synced 2025-09-05 11:53:41 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
loongarch-next
linux-loongson/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
Michal Simek f0ceedd52a dt-bindings: xilinx: Deprecate header with firmware constants 
Firmware contants do not fit the purpose of bindings because they are not
independent IDs for abstractions. They are more or less just contants which
better to wire via header with DT which is using it.
That's why add deprecated message to dt binding header and also update
existing dt bindings not to use macros from the header  and replace them by
it's value. Actually value is not relevant because it is only example.

The similar changes have been done by commit 9d92925768 ("dt-bindings:
pinctrl: samsung: deprecate header with register constants").

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/2a6f0229522327939e6893565e540b75f854a37b.1738600745.git.michal.simek@amd.com
2025-02-21 07:58:35 +01:00

236 lines
9.8 KiB
YAML
Raw Permalink Blame History

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Xilinx Zynq Ultrascale AMS controller
maintainers:
- Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
description: |
The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors
that can be used to sample external voltages and monitor on-die operating
conditions, such as temperature and supply voltage levels.
The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and
PS (Processing System) SYSMON.
All designs should have AMS registers, but PS and PL are optional. The
AMS controller can work with only PS, only PL and both PS and PL
configurations. Please specify registers according to your design. Devicetree
should always have AMS module property. Providing PS & PL module is optional.
AMS Channel Details
```````````````````
Sysmon Block |Channel| Details |Measurement
|Number | |Type
---------------------------------------------------------------------------------------------------------
AMS CTRL |0 |System PLLs voltage measurement, VCC_PSPLL. |Voltage
|1 |Battery voltage measurement, VCC_PSBATT. |Voltage
|2 |PL Internal voltage measurement, VCCINT. |Voltage
|3 |Block RAM voltage measurement, VCCBRAM. |Voltage
|4 |PL Aux voltage measurement, VCCAUX. |Voltage
|5 |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL. |Voltage
|6 |VCC_PSINTFP_DDR voltage measurement. |Voltage
---------------------------------------------------------------------------------------------------------
PS Sysmon |7 |LPD temperature measurement. |Temperature
|8 |FPD temperature measurement (REMOTE). |Temperature
|9 |VCC PS LPD voltage measurement (supply1). |Voltage
|10 |VCC PS FPD voltage measurement (supply2). |Voltage
|11 |PS Aux voltage reference (supply3). |Voltage
|12 |DDR I/O VCC voltage measurement. |Voltage
|13 |PS IO Bank 503 voltage measurement (supply5). |Voltage
|14 |PS IO Bank 500 voltage measurement (supply6). |Voltage
|15 |VCCO_PSIO1 voltage measurement. |Voltage
|16 |VCCO_PSIO2 voltage measurement. |Voltage
|17 |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC). |Voltage
|18 |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT). |Voltage
|19 |VCC_PSADC voltage measurement. |Voltage
---------------------------------------------------------------------------------------------------------
PL Sysmon |20 |PL temperature measurement. |Temperature
|21 |PL Internal voltage measurement, VCCINT. |Voltage
|22 |PL Auxiliary voltage measurement, VCCAUX. |Voltage
|23 |ADC Reference P+ voltage measurement. |Voltage
|24 |ADC Reference N- voltage measurement. |Voltage
|25 |PL Block RAM voltage measurement, VCCBRAM. |Voltage
|26 |LPD Internal voltage measurement, VCC_PSINTLP (supply4). |Voltage
|27 |FPD Internal voltage measurement, VCC_PSINTFP (supply5). |Voltage
|28 |PS Auxiliary voltage measurement (supply6). |Voltage
|29 |PL VCCADC voltage measurement (vccams). |Voltage
|30 |Differential analog input signal voltage measurement. |Voltage
|31 |VUser0 voltage measurement (supply7). |Voltage
|32 |VUser1 voltage measurement (supply8). |Voltage
|33 |VUser2 voltage measurement (supply9). |Voltage
|34 |VUser3 voltage measurement (supply10). |Voltage
|35 |Auxiliary ch 0 voltage measurement (VAux0). |Voltage
|36 |Auxiliary ch 1 voltage measurement (VAux1). |Voltage
|37 |Auxiliary ch 2 voltage measurement (VAux2). |Voltage
|38 |Auxiliary ch 3 voltage measurement (VAux3). |Voltage
|39 |Auxiliary ch 4 voltage measurement (VAux4). |Voltage
|40 |Auxiliary ch 5 voltage measurement (VAux5). |Voltage
|41 |Auxiliary ch 6 voltage measurement (VAux6). |Voltage
|42 |Auxiliary ch 7 voltage measurement (VAux7). |Voltage
|43 |Auxiliary ch 8 voltage measurement (VAux8). |Voltage
|44 |Auxiliary ch 9 voltage measurement (VAux9). |Voltage
|45 |Auxiliary ch 10 voltage measurement (VAux10). |Voltage
|46 |Auxiliary ch 11 voltage measurement (VAux11). |Voltage
|47 |Auxiliary ch 12 voltage measurement (VAux12). |Voltage
|48 |Auxiliary ch 13 voltage measurement (VAux13). |Voltage
|49 |Auxiliary ch 14 voltage measurement (VAux14). |Voltage
|50 |Auxiliary ch 15 voltage measurement (VAux15). |Voltage
--------------------------------------------------------------------------------------------------------
properties:
compatible:
enum:
- xlnx,zynqmp-ams
interrupts:
maxItems: 1
reg:
description: AMS Controller register space
maxItems: 1
clocks:
items:
- description: AMS reference clock
ranges:
description:
Maps the child address space for PS and/or PL.
maxItems: 1
'#address-cells':
const: 1
'#size-cells':
const: 1
'#io-channel-cells':
const: 1
ams-ps@0:
type: object
description: |
PS (Processing System) SYSMON is memory mapped to PS. This block has
built-in alarm generation logic that is used to interrupt the processor
based on condition set.
properties:
compatible:
enum:
- xlnx,zynqmp-ams-ps
reg:
description: Register Space for PS-SYSMON
maxItems: 1
required:
- compatible
- reg
additionalProperties: false
ams-pl@400:
type: object
additionalProperties: false
description:
PL-SYSMON is capable of monitoring off chip voltage and temperature.
PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
from external master. Out of this interface currently only DRP is
supported. This block has alarm generation logic that is used to
interrupt the processor based on condition set.
properties:
compatible:
items:
- enum:
- xlnx,zynqmp-ams-pl
reg:
description: Register Space for PL-SYSMON.
maxItems: 1
'#address-cells':
const: 1
'#size-cells':
const: 0
patternProperties:
"^channel@([2-4][0-9]|50)$":
type: object
description:
Describes the external channels connected.
properties:
reg:
description:
Pair of pins the channel is connected to. This value is
same as Channel Number for a particular channel.
minimum: 20
maximum: 50
xlnx,bipolar:
$ref: /schemas/types.yaml#/definitions/flag
type: boolean
description:
If the set channel is used in bipolar mode.
required:
- reg
additionalProperties: false
required:
- compatible
- reg
- clocks
- ranges
additionalProperties: false
examples:
- |
bus {
#address-cells = <2>;
#size-cells = <2>;
xilinx_ams: ams@ffa50000 {
compatible = "xlnx,zynqmp-ams";
interrupt-parent = <&gic>;
interrupts = <0 56 4>;
reg = <0x0 0xffa50000 0x0 0x800>;
clocks = <&zynqmp_clk 70>;
#address-cells = <1>;
#size-cells = <1>;
#io-channel-cells = <1>;
ranges = <0 0 0xffa50800 0x800>;
ams_ps: ams-ps@0 {
compatible = "xlnx,zynqmp-ams-ps";
reg = <0 0x400>;
};
ams_pl: ams-pl@400 {
compatible = "xlnx,zynqmp-ams-pl";
reg = <0x400 0x400>;
#address-cells = <1>;
#size-cells = <0>;
channel@30 {
reg = <30>;
xlnx,bipolar;
};
channel@31 {
reg = <31>;
};
channel@38 {
reg = <38>;
xlnx,bipolar;
};
};
};
};
Reference in New Issue View Git Blame Copy Permalink