mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-04 02:25:58 +00:00
6632b45606
These modify the corresponding bits in the configuration register. adi,comp-int is a hardware property, because it affects the behavior of the interrupt signal and whatever it is connected to. adi,timeout-enable is a hardware property, because it affects i2c bus operation. Signed-off-by: Daniel Matyas <daniel.matyas@analog.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230919093456.10592-3-daniel.matyas@analog.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
121 lines
2.6 KiB
YAML
121 lines
2.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/hwmon/adi,max31827.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch
|
|
|
|
maintainers:
|
|
- Daniel Matyas <daniel.matyas@analog.com>
|
|
|
|
description: |
|
|
Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch with
|
|
I2C Interface
|
|
https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- const: adi,max31827
|
|
- items:
|
|
- enum:
|
|
- adi,max31828
|
|
- adi,max31829
|
|
- const: adi,max31827
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
vref-supply:
|
|
description:
|
|
Must have values in the interval (1.6V; 3.6V) in order for the device to
|
|
function correctly.
|
|
|
|
adi,comp-int:
|
|
description:
|
|
If present interrupt mode is used. If not present comparator mode is used
|
|
(default).
|
|
type: boolean
|
|
|
|
adi,alarm-pol:
|
|
description:
|
|
Sets the alarms active state.
|
|
- 0 = active low
|
|
- 1 = active high
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
adi,fault-q:
|
|
description:
|
|
Select how many consecutive temperature faults must occur before
|
|
overtemperature or undertemperature faults are indicated in the
|
|
corresponding status bits.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [1, 2, 4, 8]
|
|
|
|
adi,timeout-enable:
|
|
description:
|
|
Enables timeout. Bus timeout resets the I2C-compatible interface when SCL
|
|
is low for more than 30ms (nominal).
|
|
type: boolean
|
|
|
|
allOf:
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: adi,max31829
|
|
|
|
then:
|
|
properties:
|
|
adi,alarm-pol:
|
|
default: 1
|
|
|
|
else:
|
|
properties:
|
|
adi,alarm-pol:
|
|
default: 0
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: adi,max31827
|
|
|
|
then:
|
|
properties:
|
|
adi,fault-q:
|
|
default: 1
|
|
|
|
else:
|
|
properties:
|
|
adi,fault-q:
|
|
default: 4
|
|
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- vref-supply
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
temperature-sensor@42 {
|
|
compatible = "adi,max31827";
|
|
reg = <0x42>;
|
|
vref-supply = <®_vdd>;
|
|
adi,comp-int;
|
|
adi,alarm-pol = <0>;
|
|
adi,fault-q = <1>;
|
|
adi,timeout-enable;
|
|
};
|
|
};
|
|
...
|