mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-01 06:39:05 +00:00
a72aa8985c
The commit591825fba8("dt-bindings: display: ssd1307fb: Remove default width and height values") used the wrong properties for width and height, instead of the correct "solomon,width" and "solomon,height" properties. Fix this by adding the vendor prefix to the width and height properties. Fixes:591825fba8("dt-bindings: display: ssd1307fb: Remove default width and height values") Reported-by: Conor Dooley <conor@kernel.org> Closes: https://lore.kernel.org/dri-devel/20231218-example-envision-b41ca8efa251@spud/ Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231229112026.2797483-2-javierm@redhat.com
270 lines
6.6 KiB
YAML
270 lines
6.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/solomon,ssd1307fb.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Solomon SSD1307 OLED Controller Framebuffer
|
|
|
|
maintainers:
|
|
- Maxime Ripard <mripard@kernel.org>
|
|
- Javier Martinez Canillas <javierm@redhat.com>
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
# Deprecated compatible strings
|
|
- enum:
|
|
- solomon,ssd1305fb-i2c
|
|
- solomon,ssd1306fb-i2c
|
|
- solomon,ssd1307fb-i2c
|
|
- solomon,ssd1309fb-i2c
|
|
deprecated: true
|
|
- enum:
|
|
- sinowealth,sh1106
|
|
- solomon,ssd1305
|
|
- solomon,ssd1306
|
|
- solomon,ssd1307
|
|
- solomon,ssd1309
|
|
|
|
pwms:
|
|
maxItems: 1
|
|
|
|
vbat-supply:
|
|
description: The supply for VBAT
|
|
|
|
solomon,page-offset:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
default: 1
|
|
description:
|
|
Offset of pages (band of 8 pixels) that the screen is mapped to
|
|
|
|
solomon,segment-no-remap:
|
|
type: boolean
|
|
description:
|
|
Display needs normal (non-inverted) data column to segment mapping
|
|
|
|
solomon,col-offset:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
default: 0
|
|
description:
|
|
Offset of columns (COL/SEG) that the screen is mapped to
|
|
|
|
solomon,com-seq:
|
|
type: boolean
|
|
description:
|
|
Display uses sequential COM pin configuration
|
|
|
|
solomon,com-lrremap:
|
|
type: boolean
|
|
description:
|
|
Display uses left-right COM pin remap
|
|
|
|
solomon,com-invdir:
|
|
type: boolean
|
|
description:
|
|
Display uses inverted COM pin scan direction
|
|
|
|
solomon,com-offset:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
default: 0
|
|
description:
|
|
Number of the COM pin wired to the first display line
|
|
|
|
solomon,prechargep1:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
default: 2
|
|
description:
|
|
Length of deselect period (phase 1) in clock cycles
|
|
|
|
solomon,prechargep2:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
default: 2
|
|
description:
|
|
Length of precharge period (phase 2) in clock cycles. This needs to be
|
|
the higher, the higher the capacitance of the OLED's pixels is.
|
|
|
|
solomon,dclk-div:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 1
|
|
maximum: 16
|
|
description:
|
|
Clock divisor. The default value is controller-dependent.
|
|
|
|
solomon,dclk-frq:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 0
|
|
maximum: 15
|
|
description:
|
|
Clock frequency, higher value means higher frequency.
|
|
The default value is controller-dependent.
|
|
|
|
solomon,lookup-table:
|
|
$ref: /schemas/types.yaml#/definitions/uint8-array
|
|
maxItems: 4
|
|
description:
|
|
8 bit value array of current drive pulse widths for BANK0, and colors A,
|
|
B, and C. Each value in range of 31 to 63 for pulse widths of 32 to 64.
|
|
Color D is always width 64.
|
|
|
|
solomon,area-color-enable:
|
|
type: boolean
|
|
description:
|
|
Display uses color mode
|
|
|
|
solomon,low-power:
|
|
type: boolean
|
|
description:
|
|
Display runs in low power mode
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
allOf:
|
|
- $ref: solomon,ssd-common.yaml#
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: sinowealth,sh1106
|
|
then:
|
|
properties:
|
|
solomon,width:
|
|
default: 132
|
|
solomon,height:
|
|
default: 64
|
|
solomon,dclk-div:
|
|
default: 1
|
|
solomon,dclk-frq:
|
|
default: 5
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- solomon,ssd1305-i2c
|
|
- solomon,ssd1305
|
|
then:
|
|
properties:
|
|
solomon,width:
|
|
default: 132
|
|
solomon,height:
|
|
default: 64
|
|
solomon,dclk-div:
|
|
default: 1
|
|
solomon,dclk-frq:
|
|
default: 7
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- solomon,ssd1306-i2c
|
|
- solomon,ssd1306
|
|
then:
|
|
properties:
|
|
solomon,width:
|
|
default: 128
|
|
solomon,height:
|
|
default: 64
|
|
solomon,dclk-div:
|
|
default: 1
|
|
solomon,dclk-frq:
|
|
default: 8
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- solomon,ssd1307-i2c
|
|
- solomon,ssd1307
|
|
then:
|
|
properties:
|
|
solomon,width:
|
|
default: 128
|
|
solomon,height:
|
|
default: 39
|
|
solomon,dclk-div:
|
|
default: 2
|
|
solomon,dclk-frq:
|
|
default: 12
|
|
required:
|
|
- pwms
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- solomon,ssd1309-i2c
|
|
- solomon,ssd1309
|
|
then:
|
|
properties:
|
|
solomon,width:
|
|
default: 128
|
|
solomon,height:
|
|
default: 64
|
|
solomon,dclk-div:
|
|
default: 1
|
|
solomon,dclk-frq:
|
|
default: 10
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ssd1307_i2c: oled@3c {
|
|
compatible = "solomon,ssd1307";
|
|
reg = <0x3c>;
|
|
pwms = <&pwm 4 3000>;
|
|
reset-gpios = <&gpio2 7>;
|
|
};
|
|
|
|
ssd1306_i2c: oled@3d {
|
|
compatible = "solomon,ssd1306";
|
|
reg = <0x3d>;
|
|
pwms = <&pwm 4 3000>;
|
|
reset-gpios = <&gpio2 7>;
|
|
solomon,com-lrremap;
|
|
solomon,com-invdir;
|
|
solomon,com-offset = <32>;
|
|
solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;
|
|
};
|
|
};
|
|
- |
|
|
spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ssd1307_spi: oled@0 {
|
|
compatible = "solomon,ssd1307";
|
|
reg = <0x0>;
|
|
pwms = <&pwm 4 3000>;
|
|
reset-gpios = <&gpio2 7>;
|
|
dc-gpios = <&gpio2 8>;
|
|
spi-max-frequency = <10000000>;
|
|
};
|
|
|
|
ssd1306_spi: oled@1 {
|
|
compatible = "solomon,ssd1306";
|
|
reg = <0x1>;
|
|
pwms = <&pwm 4 3000>;
|
|
reset-gpios = <&gpio2 7>;
|
|
dc-gpios = <&gpio2 8>;
|
|
spi-max-frequency = <10000000>;
|
|
solomon,com-lrremap;
|
|
solomon,com-invdir;
|
|
solomon,com-offset = <32>;
|
|
solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;
|
|
};
|
|
};
|