mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-01 06:39:05 +00:00

Himax HX8279 is a Display DriverIC suitable for driving LCD MIPI-DSI panels. Describe this DriverIC, the Startek KD070FHFID078 panel found on newer revisions of the MediaTek Genio 510/700/1200 Evaluation Kits (EVK), and the Aoly SL101PM1794FOG-V15 found on some i.MX8MM boards. Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250410072456.387562-3-angelogioacchino.delregno@collabora.com Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20250414082918.30298-3-angelogioacchino.delregno@collabora.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250414082918.30298-3-angelogioacchino.delregno@collabora.com
76 lines
1.7 KiB
YAML
76 lines
1.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/panel/himax,hx8279.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Himax HX8279/HX8279-D based MIPI-DSI panels
|
|
|
|
maintainers:
|
|
- AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
|
|
description:
|
|
The Himax HX8279 is a 1803 channel outputs source driver with MIPI
|
|
TCON, which generates the horizontal and vertical control timing to
|
|
the source and gate drivers.
|
|
This DriverIC is most suitable for 1200x1920, 1080x1920, 1200x1600,
|
|
and 600x1024 panels and outputs full RGB888 over two or four lanes,
|
|
single or dual, MIPI-DSI video interface.
|
|
|
|
allOf:
|
|
- $ref: panel-common-dual.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- enum:
|
|
- aoly,sl101pm1794fog-v15
|
|
- startek,kd070fhfid078
|
|
- const: himax,hx8279
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
iovcc-supply:
|
|
description: I/O voltage supply
|
|
|
|
vdd-supply:
|
|
description: Panel power supply
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- backlight
|
|
- reset-gpios
|
|
- iovcc-supply
|
|
- vdd-supply
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
dsi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
panel@0 {
|
|
compatible = "startek,kd070fhfid078", "himax,hx8279";
|
|
reg = <0>;
|
|
backlight = <&backlight>;
|
|
enable-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
|
|
iovcc-supply = <&vreg_lcm_vio>;
|
|
vdd-supply = <&vreg_lcm_vdd>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&dsi_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|