mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-01 06:39:05 +00:00
d682eef93e
The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display from an unknown
OEM used in a number of handheld gaming devices made by Anbernic.
Previously committed using the OEM serial without a vendor prefix,
however following subsequent discussion the preference is to use the
integrating device vendor and name where the OEM is unknown.
There are 4 RG35XX series devices from Anbernic based on an Allwinner
H700 SoC using this panel, with the -Plus variant introduced first.
Therefore the -Plus is used as the fallback for the subsequent -H,
-2024, and -SP devices.
Alter the filename and compatible string to reflect the convention.
Fixes: 45b888a898 ("dt-bindings: display: panel: Add WL-355608-A8 panel")
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-2-ryan@testtoast.com
68 lines
1.4 KiB
YAML
68 lines
1.4 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/panel/anbernic,rg35xx-plus-panel.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Anbernic RG35XX series (WL-355608-A8) 3.5" 640x480 24-bit IPS LCD panel
|
|
|
|
maintainers:
|
|
- Ryan Walklin <ryan@testtoast.com>
|
|
|
|
allOf:
|
|
- $ref: panel-common.yaml#
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- const: anbernic,rg35xx-plus-panel
|
|
- items:
|
|
- enum:
|
|
- anbernic,rg35xx-2024-panel
|
|
- anbernic,rg35xx-h-panel
|
|
- anbernic,rg35xx-sp-panel
|
|
- const: anbernic,rg35xx-plus-panel
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
spi-3wire: true
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- port
|
|
- power-supply
|
|
- reset-gpios
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
panel@0 {
|
|
compatible = "anbernic,rg35xx-plus-panel";
|
|
reg = <0>;
|
|
|
|
spi-3wire;
|
|
spi-max-frequency = <3125000>;
|
|
|
|
reset-gpios = <&pio 8 14 GPIO_ACTIVE_LOW>; // PI14
|
|
|
|
backlight = <&backlight>;
|
|
power-supply = <®_lcd>;
|
|
|
|
port {
|
|
endpoint {
|
|
remote-endpoint = <&tcon_lcd0_out_lcd>;
|
|
};
|
|
};
|
|
};
|
|
};
|