mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-01 06:39:05 +00:00
20a72af11f
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
118 lines
2.7 KiB
YAML
118 lines
2.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/bridge/ti,dlpc3433.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: TI DLPC3433 MIPI DSI to DMD bridge
|
|
|
|
maintainers:
|
|
- Jagan Teki <jagan@amarulasolutions.com>
|
|
- Christopher Vollo <chris@renewoutreach.org>
|
|
|
|
description: |
|
|
TI DLPC3433 is a MIPI DSI based display controller bridge
|
|
for processing high resolution DMD based projectors.
|
|
|
|
It has a flexible configuration of MIPI DSI and DPI signal
|
|
input that produces a DMD output in RGB565, RGB666, RGB888
|
|
formats.
|
|
|
|
It supports upto 720p resolution with 60 and 120 Hz refresh
|
|
rates.
|
|
|
|
properties:
|
|
compatible:
|
|
const: ti,dlpc3433
|
|
|
|
reg:
|
|
enum:
|
|
- 0x1b
|
|
- 0x1d
|
|
|
|
enable-gpios:
|
|
description: PROJ_ON pin, chip powers up PROJ_ON is high.
|
|
|
|
vcc_intf-supply:
|
|
description: A 1.8V/3.3V supply that power the Host I/O.
|
|
|
|
vcc_flsh-supply:
|
|
description: A 1.8V/3.3V supply that power the Flash I/O.
|
|
|
|
ports:
|
|
$ref: /schemas/graph.yaml#/properties/ports
|
|
|
|
properties:
|
|
port@0:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
unevaluatedProperties: false
|
|
description: Video port for MIPI DSI input.
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
data-lanes:
|
|
description: array of physical DSI data lane indexes.
|
|
minItems: 1
|
|
items:
|
|
- const: 1
|
|
- const: 2
|
|
- const: 3
|
|
- const: 4
|
|
|
|
port@1:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description: Video port for DMD output.
|
|
|
|
required:
|
|
- port@0
|
|
- port@1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- enable-gpios
|
|
- ports
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
bridge@1b {
|
|
compatible = "ti,dlpc3433";
|
|
reg = <0x1b>;
|
|
enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
bridge_in_dsi: endpoint {
|
|
remote-endpoint = <&dsi_out_bridge>;
|
|
data-lanes = <1 2 3 4>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
bridge_out_panel: endpoint {
|
|
remote-endpoint = <&panel_out_bridge>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|