mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-09-07 14:19:35 +00:00
63fd4d7dc4
Several TI SoC clock bindings were marked as work-in-progress / unstable
between 2013-2016, for example in commit f60b1ea5ea ("CLK: TI: add
support for gate clock"). It was enough of time to consider them stable
and expect usual ABI rules.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240224091236.10146-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
44 lines
1.7 KiB
Plaintext
44 lines
1.7 KiB
Plaintext
Binding for Texas Instruments APLL clock.
|
|
|
|
This binding uses the common clock binding[1]. It assumes a
|
|
register-mapped APLL with usually two selectable input clocks
|
|
(reference clock and bypass clock), with analog phase locked
|
|
loop logic for multiplying the input clock to a desired output
|
|
clock. This clock also typically supports different operation
|
|
modes (locked, low power stop etc.) APLL mostly behaves like
|
|
a subtype of a DPLL [2], although a simplified one at that.
|
|
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
[2] Documentation/devicetree/bindings/clock/ti/dpll.txt
|
|
|
|
Required properties:
|
|
- compatible : shall be "ti,dra7-apll-clock" or "ti,omap2-apll-clock"
|
|
- #clock-cells : from common clock binding; shall be set to 0.
|
|
- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
|
|
- reg : address and length of the register set for controlling the APLL.
|
|
It contains the information of registers in the following order:
|
|
"control" - contains the control register offset
|
|
"idlest" - contains the idlest register offset
|
|
"autoidle" - contains the autoidle register offset (OMAP2 only)
|
|
- ti,clock-frequency : static clock frequency for the clock (OMAP2 only)
|
|
- ti,idlest-shift : bit-shift for the idlest field (OMAP2 only)
|
|
- ti,bit-shift : bit-shift for enable and autoidle fields (OMAP2 only)
|
|
|
|
Examples:
|
|
apll_pcie_ck: apll_pcie_ck {
|
|
#clock-cells = <0>;
|
|
clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
|
|
reg = <0x021c>, <0x0220>;
|
|
compatible = "ti,dra7-apll-clock";
|
|
};
|
|
|
|
apll96_ck: apll96_ck {
|
|
#clock-cells = <0>;
|
|
compatible = "ti,omap2-apll-clock";
|
|
clocks = <&sys_ck>;
|
|
ti,bit-shift = <2>;
|
|
ti,idlest-shift = <8>;
|
|
ti,clock-frequency = <96000000>;
|
|
reg = <0x0500>, <0x0530>, <0x0520>;
|
|
};
|