Proxmox-Port/linux-loongson
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson synced 2025-09-01 15:14:52 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
loongarch-next
linux-loongson/Documentation/ABI/testing/sysfs-driver-ufs
Linus Torvalds 2c8c9aae44 SCSI misc on 20250730 
Smaller set of driver updates than usual (ufs, lpfc, mpi3mr).  The
 rest (including the core file changes) are doc updates and some minor
 bug fixes.
 
 Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCaIosYSYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQWTAQCfaWMn
 U7rAoU2zEkv4/6kajfw0Nz62IjbX3fLveBOgFwD/ZQqXVPpD+316ksjzwM+5E+O9
 fxYASbF/IOLC8g1z7JU=
 =7x/z
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "Smaller set of driver updates than usual (ufs, lpfc, mpi3mr).

  The rest (including the core file changes) are doc updates and some
  minor bug fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (49 commits)
  scsi: libiscsi: Initialize iscsi_conn->dd_data only if memory is allocated
  scsi: scsi_transport_fc: Add comments to describe added 'rport' parameter
  scsi: bfa: Double-free fix
  scsi: isci: Fix dma_unmap_sg() nents value
  scsi: mvsas: Fix dma_unmap_sg() nents value
  scsi: elx: efct: Fix dma_unmap_sg() nents value
  scsi: scsi_transport_fc: Change to use per-rport devloss_work_q
  scsi: ufs: exynos: Fix programming of HCI_UTRL_NEXUS_TYPE
  scsi: core: Fix kernel doc for scsi_track_queue_full()
  scsi: ibmvscsi_tgt: Fix dma_unmap_sg() nents value
  scsi: ibmvscsi_tgt: Fix typo in comment
  scsi: mpi3mr: Update driver version to 8.14.0.5.50
  scsi: mpi3mr: Serialize admin queue BAR writes on 32-bit systems
  scsi: mpi3mr: Drop unnecessary volatile from __iomem pointers
  scsi: mpi3mr: Fix race between config read submit and interrupt completion
  scsi: ufs: ufs-qcom: Enable QUnipro Internal Clock Gating
  scsi: ufs: core: Add ufshcd_dme_rmw() to modify DME attributes
  scsi: ufs: ufs-qcom: Update esi_vec_mask for HW major version >= 6
  scsi: core: Use scsi_cmd_priv() instead of open-coding it
  scsi: qla2xxx: Remove firmware URL
  ...
2025-07-31 12:13:53 -07:00

1771 lines
70 KiB
Plaintext
Raw Permalink Blame History

What: /sys/bus/*/drivers/ufshcd/*/auto_hibern8
Date: March 2018
Contact: linux-scsi@vger.kernel.org
Description:
This file contains the auto-hibernate idle timer setting of a
UFS host controller. A value of '0' means auto-hibernate is not
enabled. Otherwise the value is the number of microseconds of
idle time before the UFS host controller will autonomously put
the link into hibernate state. That will save power at the
expense of increased latency. Note that the hardware supports
10-bit values with a power-of-ten multiplier which allows a
maximum value of 102300000. Refer to the UFS Host Controller
Interface specification for more details.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_type
What: /sys/bus/platform/devices/*.ufs/device_descriptor/device_type
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the device type. This is one of the UFS
device descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class
What: /sys/bus/platform/devices/*.ufs/device_descriptor/device_class
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the device class. This is one of the UFS
device descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class
What: /sys/bus/platform/devices/*.ufs/device_descriptor/device_sub_class
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the UFS storage subclass. This is one of
the UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol
What: /sys/bus/platform/devices/*.ufs/device_descriptor/protocol
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the protocol supported by an UFS device.
This is one of the UFS device descriptor parameters.
The full information about the descriptor could be found
at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns
What: /sys/bus/platform/devices/*.ufs/device_descriptor/number_of_luns
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows number of logical units. This is one of
the UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns
What: /sys/bus/platform/devices/*.ufs/device_descriptor/number_of_wluns
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows number of well known logical units.
This is one of the UFS device descriptor parameters.
The full information about the descriptor could be found
at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable
What: /sys/bus/platform/devices/*.ufs/device_descriptor/boot_enable
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows value that indicates whether the device is
enabled for boot. This is one of the UFS device descriptor
parameters. The full information about the descriptor could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable
What: /sys/bus/platform/devices/*.ufs/device_descriptor/descriptor_access_enable
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows value that indicates whether the device
descriptor could be read after partial initialization phase
of the boot sequence. This is one of the UFS device descriptor
parameters. The full information about the descriptor could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode
What: /sys/bus/platform/devices/*.ufs/device_descriptor/initial_power_mode
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows value that defines the power mode after
device initialization or hardware reset. This is one of
the UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun
What: /sys/bus/platform/devices/*.ufs/device_descriptor/high_priority_lun
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the high priority lun. This is one of
the UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type
What: /sys/bus/platform/devices/*.ufs/device_descriptor/secure_removal_type
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the secure removal type. This is one of
the UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun
What: /sys/bus/platform/devices/*.ufs/device_descriptor/support_security_lun
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether the security lun is supported.
This is one of the UFS device descriptor parameters.
The full information about the descriptor could be found
at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency
What: /sys/bus/platform/devices/*.ufs/device_descriptor/bkops_termination_latency
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the background operations termination
latency. This is one of the UFS device descriptor parameters.
The full information about the descriptor could be found
at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level
What: /sys/bus/platform/devices/*.ufs/device_descriptor/initial_active_icc_level
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the initial active ICC level. This is one
of the UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version
What: /sys/bus/platform/devices/*.ufs/device_descriptor/specification_version
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the specification version. This is one
of the UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date
What: /sys/bus/platform/devices/*.ufs/device_descriptor/manufacturing_date
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the manufacturing date in BCD format.
This is one of the UFS device descriptor parameters.
The full information about the descriptor could be found
at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id
What: /sys/bus/platform/devices/*.ufs/device_descriptor/manufacturer_id
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the manufacturer ID. This is one of the
UFS device descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability
What: /sys/bus/platform/devices/*.ufs/device_descriptor/rtt_capability
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum number of outstanding RTTs
supported by the device. This is one of the UFS device
descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update
What: /sys/bus/platform/devices/*.ufs/device_descriptor/rtc_update
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the frequency and method of the realtime
clock update. This is one of the UFS device descriptor
parameters. The full information about the descriptor
could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features
What: /sys/bus/platform/devices/*.ufs/device_descriptor/ufs_features
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows which features are supported by the device.
This is one of the UFS device descriptor parameters.
The full information about the descriptor could be
found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout
What: /sys/bus/platform/devices/*.ufs/device_descriptor/ffu_timeout
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the FFU timeout. This is one of the
UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth
What: /sys/bus/platform/devices/*.ufs/device_descriptor/queue_depth
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the device queue depth. This is one of the
UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version
What: /sys/bus/platform/devices/*.ufs/device_descriptor/device_version
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the device version. This is one of the
UFS device descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa
What: /sys/bus/platform/devices/*.ufs/device_descriptor/number_of_secure_wpa
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows number of secure write protect areas
supported by the device. This is one of the UFS device
descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size
What: /sys/bus/platform/devices/*.ufs/device_descriptor/psa_max_data_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum amount of data that may be
written during the pre-soldering phase of the PSA flow.
This is one of the UFS device descriptor parameters.
The full information about the descriptor could be found
at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout
What: /sys/bus/platform/devices/*.ufs/device_descriptor/psa_state_timeout
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the command maximum timeout for a change
in PSA state. This is one of the UFS device descriptor
parameters. The full information about the descriptor could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/unipro_version
What: /sys/bus/platform/devices/*.ufs/interconnect_descriptor/unipro_version
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the MIPI UniPro version number in BCD format.
This is one of the UFS interconnect descriptor parameters.
The full information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/mphy_version
What: /sys/bus/platform/devices/*.ufs/interconnect_descriptor/mphy_version
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the MIPI M-PHY version number in BCD format.
This is one of the UFS interconnect descriptor parameters.
The full information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/raw_device_capacity
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/raw_device_capacity
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the total memory quantity available to
the user to configure the device logical units. This is one
of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_luns
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/max_number_of_luns
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum number of logical units
supported by the UFS device. This is one of the UFS
geometry descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/segment_size
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/segment_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the segment size. This is one of the UFS
geometry descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/allocation_unit_size
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/allocation_unit_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the allocation unit size. This is one of
the UFS geometry descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/min_addressable_block_size
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/min_addressable_block_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the minimum addressable block size. This
is one of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at UFS
specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_read_block_size
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/optimal_read_block_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the optimal read block size. This is one
of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at UFS
specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_write_block_size
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/optimal_write_block_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the optimal write block size. This is one
of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at UFS
specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_in_buffer_size
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/max_in_buffer_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum data-in buffer size. This
is one of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at UFS
specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_out_buffer_size
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/max_out_buffer_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum data-out buffer size. This
is one of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at UFS
specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/rpmb_rw_size
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/rpmb_rw_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum number of RPMB frames allowed
in Security Protocol In/Out. This is one of the UFS geometry
descriptor parameters. The full information about the
descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/dyn_capacity_resource_policy
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/dyn_capacity_resource_policy
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the dynamic capacity resource policy. This
is one of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/data_ordering
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/data_ordering
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows support for out-of-order data transfer.
This is one of the UFS geometry descriptor parameters.
The full information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_contexts
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/max_number_of_contexts
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows maximum available number of contexts which
are supported by the device. This is one of the UFS geometry
descriptor parameters. The full information about the
descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_unit_size
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/sys_data_tag_unit_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows system data tag unit size. This is one of
the UFS geometry descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_resource_size
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/sys_data_tag_resource_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows maximum storage area size allocated by
the device to handle system data by the tagging mechanism.
This is one of the UFS geometry descriptor parameters.
The full information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/secure_removal_types
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/secure_removal_types
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows supported secure removal types. This is
one of the UFS geometry descriptor parameters. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/memory_types
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/memory_types
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows supported memory types. This is one of
the UFS geometry descriptor parameters. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_max_alloc_units
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/*_memory_max_alloc_units
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum number of allocation units for
different memory types (system code, non persistent,
enhanced type 1-4). This is one of the UFS geometry
descriptor parameters. The full information about the
descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_capacity_adjustment_factor
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/*_memory_capacity_adjustment_factor
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the memory capacity adjustment factor for
different memory types (system code, non persistent,
enhanced type 1-4). This is one of the UFS geometry
descriptor parameters. The full information about the
descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/eol_info
What: /sys/bus/platform/devices/*.ufs/health_descriptor/eol_info
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows preend of life information. This is one
of the UFS health descriptor parameters. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_a
What: /sys/bus/platform/devices/*.ufs/health_descriptor/life_time_estimation_a
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows indication of the device life time
(method a). This is one of the UFS health descriptor
parameters. The full information about the descriptor
could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_b
What: /sys/bus/platform/devices/*.ufs/health_descriptor/life_time_estimation_b
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows indication of the device life time
(method b). This is one of the UFS health descriptor
parameters. The full information about the descriptor
could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/power_descriptor/active_icc_levels_vcc*
What: /sys/bus/platform/devices/*.ufs/power_descriptor/active_icc_levels_vcc*
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows maximum VCC, VCCQ and VCCQ2 value for
active ICC levels from 0 to 15. This is one of the UFS
power descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/manufacturer_name
What: /sys/bus/platform/devices/*.ufs/string_descriptors/manufacturer_name
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file contains a device manufacturer name string.
The full information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_name
What: /sys/bus/platform/devices/*.ufs/string_descriptors/product_name
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file contains a product name string. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/oem_id
What: /sys/bus/platform/devices/*.ufs/string_descriptors/oem_id
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file contains a OEM ID string. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/serial_number
What: /sys/bus/platform/devices/*.ufs/string_descriptors/serial_number
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file contains a device serial number string. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_revision
What: /sys/bus/platform/devices/*.ufs/string_descriptors/product_revision
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file contains a product revision string. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/boot_lun_id
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows boot LUN information. This is one of
the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/lun_write_protect
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows LUN write protection status. This is one of
the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/lun_queue_depth
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows LUN queue depth. This is one of the UFS
unit descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/psa_sensitive
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows PSA sensitivity. This is one of the UFS
unit descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/lun_memory_type
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows LUN memory type. This is one of the UFS
unit descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/data_reliability
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file defines the device behavior when a power failure
occurs during a write operation. This is one of the UFS
unit descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the size of addressable logical blocks
(calculated as an exponent with base 2). This is one of
the UFS unit descriptor parameters. The full information about
the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/logical_block_count
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows total number of addressable logical blocks.
This is one of the UFS unit descriptor parameters. The full
information about the descriptor could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/erase_block_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the erase block size. This is one of
the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/provisioning_type
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the thin provisioning type. This is one of
the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resource_count
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the total physical memory resources. This is
one of the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/context_capabilities
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the context capabilities. This is one of
the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/large_unit_granularity
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the granularity of the LUN. This is one of
the UFS unit descriptor parameters. The full information
about the descriptor could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/device_init
What: /sys/bus/platform/devices/*.ufs/flags/device_init
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the device init status. The full information
about the flag could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe
What: /sys/bus/platform/devices/*.ufs/flags/permanent_wpe
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether permanent write protection is enabled.
The full information about the flag could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe
What: /sys/bus/platform/devices/*.ufs/flags/power_on_wpe
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether write protection is enabled on all
logical units configured as power on write protected. The
full information about the flag could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable
What: /sys/bus/platform/devices/*.ufs/flags/bkops_enable
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether the device background operations are
enabled. The full information about the flag could be
found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable
What: /sys/bus/platform/devices/*.ufs/flags/life_span_mode_enable
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether the device life span mode is enabled.
The full information about the flag could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal
What: /sys/bus/platform/devices/*.ufs/flags/phy_resource_removal
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether physical resource removal is enable.
The full information about the flag could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc
What: /sys/bus/platform/devices/*.ufs/flags/busy_rtc
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether the device is executing internal
operation related to real time clock. The full information
about the flag could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update
What: /sys/bus/platform/devices/*.ufs/flags/disable_fw_update
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether the device FW update is permanently
disabled. The full information about the flag could be found
at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/boot_lun_enabled
What: /sys/bus/platform/devices/*.ufs/attributes/boot_lun_enabled
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the boot lun enabled UFS device attribute.
The full information about the attribute could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode
What: /sys/bus/platform/devices/*.ufs/attributes/current_power_mode
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the current power mode UFS device attribute.
The full information about the attribute could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level
What: /sys/bus/platform/devices/*.ufs/attributes/active_icc_level
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the active icc level UFS device attribute.
The full information about the attribute could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled
What: /sys/bus/platform/devices/*.ufs/attributes/ooo_data_enabled
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the out of order data transfer enabled UFS
device attribute. The full information about the attribute
could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status
What: /sys/bus/platform/devices/*.ufs/attributes/bkops_status
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the background operations status UFS device
attribute. The full information about the attribute could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/purge_status
What: /sys/bus/platform/devices/*.ufs/attributes/purge_status
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the purge operation status UFS device
attribute. The full information about the attribute could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size
What: /sys/bus/platform/devices/*.ufs/attributes/max_data_in_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum data size in a DATA IN
UPIU. The full information about the attribute could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size
What: /sys/bus/platform/devices/*.ufs/attributes/max_data_out_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the maximum number of bytes that can be
requested with a READY TO TRANSFER UPIU. The full information
about the attribute could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency
What: /sys/bus/platform/devices/*.ufs/attributes/reference_clock_frequency
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the reference clock frequency UFS device
attribute. The full information about the attribute could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock
What: /sys/bus/platform/devices/*.ufs/attributes/configuration_descriptor_lock
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether the configuration descriptor is locked.
The full information about the attribute could be found at
UFS specifications 2.1. The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/max_number_of_rtt
What: /sys/bus/platform/devices/*.ufs/attributes/max_number_of_rtt
Date: May 2024
Contact: Avri Altman <avri.altman@wdc.com>
Description: This file provides the maximum current number of
outstanding RTTs in device that is allowed. bMaxNumOfRTT is a
read-write persistent attribute and is equal to two after device
manufacturing. It shall not be set to a value greater than
bDeviceRTTCap value, and it may be set only when the hw queues are
empty.
The file is read write.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control
What: /sys/bus/platform/devices/*.ufs/attributes/exception_event_control
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the exception event control UFS device
attribute. The full information about the attribute could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status
What: /sys/bus/platform/devices/*.ufs/attributes/exception_event_status
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the exception event status UFS device
attribute. The full information about the attribute could
be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status
What: /sys/bus/platform/devices/*.ufs/attributes/ffu_status
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file provides the ffu status UFS device attribute.
The full information about the attribute could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_state
What: /sys/bus/platform/devices/*.ufs/attributes/psa_state
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file show the PSA feature status. The full information
about the attribute could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size
What: /sys/bus/platform/devices/*.ufs/attributes/psa_data_size
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the amount of data that the host plans to
load to all logical units in pre-soldering state.
The full information about the attribute could be found at
UFS specifications 2.1.
The file is read only.
What: /sys/class/scsi_device/*/device/dyn_cap_needed
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the amount of physical memory needed
to be removed from the physical memory resources pool of
the particular logical unit. The full information about
the attribute could be found at UFS specifications 2.1.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/rpm_lvl
What: /sys/bus/platform/devices/*.ufs/rpm_lvl
Date: September 2014
Contact: Can Guo <quic_cang@quicinc.com>
Description: This entry could be used to set or show the UFS device
runtime power management level. The current driver
implementation supports 7 levels with next target states:
== ====================================================
0 UFS device will stay active, UIC link will
stay active
1 UFS device will stay active, UIC link will
hibernate
2 UFS device will be moved to sleep, UIC link will
stay active
3 UFS device will be moved to sleep, UIC link will
hibernate
4 UFS device will be powered off, UIC link will
hibernate
5 UFS device will be powered off, UIC link will
be powered off
6 UFS device will be moved to deep sleep, UIC link
will be powered off. Note, deep sleep might not be
supported in which case this value will not be
accepted
== ====================================================
What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state
What: /sys/bus/platform/devices/*.ufs/rpm_target_dev_state
Date: February 2018
Contact: Can Guo <quic_cang@quicinc.com>
Description: This entry shows the target power mode of an UFS device
for the chosen runtime power management level.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state
What: /sys/bus/platform/devices/*.ufs/rpm_target_link_state
Date: February 2018
Contact: Can Guo <quic_cang@quicinc.com>
Description: This entry shows the target state of an UFS UIC link
for the chosen runtime power management level.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/spm_lvl
What: /sys/bus/platform/devices/*.ufs/spm_lvl
Date: September 2014
Contact: Can Guo <quic_cang@quicinc.com>
Description: This entry could be used to set or show the UFS device
system power management level. The current driver
implementation supports 7 levels with next target states:
== ====================================================
0 UFS device will stay active, UIC link will
stay active
1 UFS device will stay active, UIC link will
hibernate
2 UFS device will be moved to sleep, UIC link will
stay active
3 UFS device will be moved to sleep, UIC link will
hibernate
4 UFS device will be powered off, UIC link will
hibernate
5 UFS device will be powered off, UIC link will
be powered off
6 UFS device will be moved to deep sleep, UIC link
will be powered off. Note, deep sleep might not be
supported in which case this value will not be
accepted
== ====================================================
What: /sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state
What: /sys/bus/platform/devices/*.ufs/spm_target_dev_state
Date: February 2018
Contact: Can Guo <quic_cang@quicinc.com>
Description: This entry shows the target power mode of an UFS device
for the chosen system power management level.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/spm_target_link_state
What: /sys/bus/platform/devices/*.ufs/spm_target_link_state
Date: February 2018
Contact: Can Guo <quic_cang@quicinc.com>
Description: This entry shows the target state of an UFS UIC link
for the chosen system power management level.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/monitor_enable
What: /sys/bus/platform/devices/*.ufs/monitor/monitor_enable
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the status of performance monitor enablement
and it can be used to start/stop the monitor. When the monitor
is stopped, the performance data collected is also cleared.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/monitor_chunk_size
What: /sys/bus/platform/devices/*.ufs/monitor/monitor_chunk_size
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file tells the monitor to focus on requests transferring
data of specific chunk size (in Bytes). 0 means any chunk size.
It can only be changed when monitor is disabled.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_total_sectors
What: /sys/bus/platform/devices/*.ufs/monitor/read_total_sectors
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how many sectors (in 512 Bytes) have been
sent from device to host after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_total_busy
What: /sys/bus/platform/devices/*.ufs/monitor/read_total_busy
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how long (in micro seconds) has been spent
sending data from device to host after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_nr_requests
What: /sys/bus/platform/devices/*.ufs/monitor/read_nr_requests
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how many read requests have been sent after
monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_max
What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_max
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the maximum latency (in micro seconds) of
read requests after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_min
What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_min
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the minimum latency (in micro seconds) of
read requests after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_avg
What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_avg
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the average latency (in micro seconds) of
read requests after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_sum
What: /sys/bus/platform/devices/*.ufs/monitor/read_req_latency_sum
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the total latency (in micro seconds) of
read requests sent after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_total_sectors
What: /sys/bus/platform/devices/*.ufs/monitor/write_total_sectors
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how many sectors (in 512 Bytes) have been sent
from host to device after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_total_busy
What: /sys/bus/platform/devices/*.ufs/monitor/write_total_busy
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how long (in micro seconds) has been spent
sending data from host to device after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_nr_requests
What: /sys/bus/platform/devices/*.ufs/monitor/write_nr_requests
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how many write requests have been sent after
monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_max
What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_max
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the maximum latency (in micro seconds) of write
requests after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_min
What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_min
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the minimum latency (in micro seconds) of write
requests after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_avg
What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_avg
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the average latency (in micro seconds) of write
requests after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum
What: /sys/bus/platform/devices/*.ufs/monitor/write_req_latency_sum
Date: January 2021
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the total latency (in micro seconds) of write
requests after monitor gets started.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/power_info/lane
What: /sys/bus/platform/devices/*.ufs/power_info/lane
Date: September 2023
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows how many lanes are enabled on the UFS link,
i.e., an output 2 means UFS link is operating with 2 lanes.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/power_info/mode
What: /sys/bus/platform/devices/*.ufs/power_info/mode
Date: September 2023
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the PA power mode of UFS.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/power_info/rate
What: /sys/bus/platform/devices/*.ufs/power_info/rate
Date: September 2023
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the speed rate of UFS link.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/power_info/gear
What: /sys/bus/platform/devices/*.ufs/power_info/gear
Date: September 2023
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the gear of UFS link.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/power_info/dev_pm
What: /sys/bus/platform/devices/*.ufs/power_info/dev_pm
Date: September 2023
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the UFS device power mode.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/power_info/link_state
What: /sys/bus/platform/devices/*.ufs/power_info/link_state
Date: September 2023
Contact: Can Guo <quic_cang@quicinc.com>
Description: This file shows the state of UFS link.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en
What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_presv_us_en
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows if preserve user-space was configured
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units
What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_shared_alloc_units
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the shared allocated units of WB buffer
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type
What: /sys/bus/platform/devices/*.ufs/device_descriptor/wb_type
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the configured WB type.
0x1 for shared buffer mode. 0x0 for dedicated buffer mode.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_buff_cap_adj
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the total user-space decrease in shared
buffer mode.
The value of this parameter is 3 for TLC NAND when SLC mode
is used as WriteBooster Buffer. 2 for MLC NAND.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_alloc_units
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the Maximum total WriteBooster Buffer size
which is supported by the entire device.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_wb_luns
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the maximum number of luns that can support
WriteBooster.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_red_type
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: The supportability of user space reduction mode
and preserve user space mode.
00h: WriteBooster Buffer can be configured only in
user space reduction type.
01h: WriteBooster Buffer can be configured only in
preserve user space type.
02h: Device can be configured in either user space
reduction type or preserve user space type.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type
What: /sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_wb_type
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: The supportability of WriteBooster Buffer type.
=== ==========================================================
00h LU based WriteBooster Buffer configuration
01h Single shared WriteBooster Buffer configuration
02h Supporting both LU based WriteBooster.
Buffer and Single shared WriteBooster Buffer configuration
=== ==========================================================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_enable
What: /sys/bus/platform/devices/*.ufs/flags/wb_enable
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the status of WriteBooster.
== ============================
0 WriteBooster is not enabled.
1 WriteBooster is enabled
== ============================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en
What: /sys/bus/platform/devices/*.ufs/flags/wb_flush_en
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows if flush is enabled.
== =================================
0 Flush operation is not performed.
1 Flush operation is performed.
== =================================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8
What: /sys/bus/platform/devices/*.ufs/flags/wb_flush_during_h8
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: Flush WriteBooster Buffer during hibernate state.
== =================================================
0 Device is not allowed to flush the
WriteBooster Buffer during link hibernate state.
1 Device is allowed to flush the
WriteBooster Buffer during link hibernate state.
== =================================================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf
What: /sys/bus/platform/devices/*.ufs/attributes/wb_avail_buf
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the amount of unused WriteBooster buffer
available.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf
What: /sys/bus/platform/devices/*.ufs/attributes/wb_cur_buf
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the amount of unused current buffer.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status
What: /sys/bus/platform/devices/*.ufs/attributes/wb_flush_status
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the flush operation status.
=== ======================================
00h idle
01h Flush operation in progress
02h Flush operation stopped prematurely.
03h Flush operation completed successfully
04h Flush operation general failure
=== ======================================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est
What: /sys/bus/platform/devices/*.ufs/attributes/wb_life_time_est
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows an indication of the WriteBooster Buffer
lifetime based on the amount of performed program/erase cycles
=== =============================================
01h 0% - 10% WriteBooster Buffer life time used
...
0Ah 90% - 100% WriteBooster Buffer life time used
=== =============================================
The file is read only.
What: /sys/class/scsi_device/*/device/unit_descriptor/wb_buf_alloc_units
Date: June 2020
Contact: Asutosh Das <quic_asutoshd@quicinc.com>
Description: This entry shows the configured size of WriteBooster buffer.
0400h corresponds to 4GB.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/wb_on
What: /sys/bus/platform/devices/*.ufs/wb_on
Date: January 2021
Contact: Bean Huo <beanhuo@micron.com>
Description: This node is used to set or display whether UFS WriteBooster is
enabled. Echo 0 to this file to disable UFS WriteBooster or 1 to
enable it. The WriteBooster is enabled after power-on/reset,
however, it will be disabled/enable while CLK scaling down/up
(if the platform supports UFSHCD_CAP_CLK_SCALING). For a
platform that doesn't support UFSHCD_CAP_CLK_SCALING, we can
disable/enable WriteBooster through this sysfs node.
What: /sys/bus/platform/drivers/ufshcd/*/enable_wb_buf_flush
What: /sys/bus/platform/devices/*.ufs/enable_wb_buf_flush
Date: July 2022
Contact: Jinyoung Choi <j-young.choi@samsung.com>
Description: This entry shows the status of WriteBooster buffer flushing
and it can be used to enable or disable the flushing.
If flushing is enabled, the device executes the flush
operation when the command queue is empty.
What: /sys/bus/platform/drivers/ufshcd/*/wb_flush_threshold
What: /sys/bus/platform/devices/*.ufs/wb_flush_threshold
Date: June 2023
Contact: Lu Hongfei <luhongfei@vivo.com>
Description:
wb_flush_threshold represents the threshold for flushing WriteBooster buffer,
whose value expressed in unit of 10% granularity, such as '1' representing 10%,
'2' representing 20%, and so on.
If avail_wb_buff < wb_flush_threshold, it indicates that WriteBooster buffer needs to
be flushed, otherwise it is not necessary.
Contact: Daniil Lunev <dlunev@chromium.org>
What: /sys/bus/platform/drivers/ufshcd/*/capabilities/
What: /sys/bus/platform/devices/*.ufs/capabilities/
Date: August 2022
Description: The group represents the effective capabilities of the
host-device pair. i.e. the capabilities which are enabled in the
driver for the specific host controller, supported by the host
controller and are supported and/or have compatible
configuration on the device side.
Contact: Daniil Lunev <dlunev@chromium.org>
What: /sys/bus/platform/drivers/ufshcd/*/capabilities/clock_scaling
What: /sys/bus/platform/devices/*.ufs/capabilities/clock_scaling
Date: August 2022
Contact: Daniil Lunev <dlunev@chromium.org>
Description: Indicates status of clock scaling.
== ============================
0 Clock scaling is not supported.
1 Clock scaling is supported.
== ============================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/capabilities/write_booster
What: /sys/bus/platform/devices/*.ufs/capabilities/write_booster
Date: August 2022
Contact: Daniil Lunev <dlunev@chromium.org>
Description: Indicates status of Write Booster.
== ============================
0 Write Booster can not be enabled.
1 Write Booster can be enabled.
== ============================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/rtc_update_ms
What: /sys/bus/platform/devices/*.ufs/rtc_update_ms
Date: November 2023
Contact: Bean Huo <beanhuo@micron.com>
Description:
rtc_update_ms indicates how often the host should synchronize or update the
UFS RTC. If set to 0, this will disable UFS RTC periodic update.
What: /sys/devices/platform/.../ufshci_capabilities/version
Date: August 2024
Contact: Avri Altman <avri.altman@wdc.com>
Description:
Host Capabilities register group: UFS version register.
Symbol - VER. This file shows the UFSHCD version.
Example: Version 3.12 would be represented as 0000_0312h.
The file is read only.
What: /sys/devices/platform/.../ufshci_capabilities/product_id
Date: August 2024
Contact: Avri Altman <avri.altman@wdc.com>
Description:
Host Capabilities register group: product ID register.
Symbol - HCPID. This file shows the UFSHCD product id.
The content of this register is vendor specific.
The file is read only.
What: /sys/devices/platform/.../ufshci_capabilities/man_id
Date: August 2024
Contact: Avri Altman <avri.altman@wdc.com>
Description:
Host Capabilities register group: manufacturer ID register.
Symbol - HCMID. This file shows the UFSHCD manufacturer id.
The Manufacturer ID is defined by JEDEC in JEDEC-JEP106.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/critical_health
What: /sys/bus/platform/devices/*.ufs/critical_health
Date: February 2025
Contact: Avri Altman <avri.altman@wdc.com>
Description: Report the number of times a critical health event has been
reported by a UFS device. Further insight into the specific
issue can be gained by reading one of: bPreEOLInfo,
bDeviceLifeTimeEstA, bDeviceLifeTimeEstB,
bWriteBoosterBufferLifeTimeEst, and bRPMBLifeTimeEst.
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/clkscale_enable
What: /sys/bus/platform/devices/*.ufs/clkscale_enable
Date: January 2025
Contact: Ziqi Chen <quic_ziqichen@quicinc.com>
Description:
This attribute shows whether the UFS clock scaling is enabled or not.
And it can be used to enable/disable the clock scaling by writing
1 or 0 to this attribute.
The attribute is read/write.
What: /sys/bus/platform/drivers/ufshcd/*/clkgate_enable
What: /sys/bus/platform/devices/*.ufs/clkgate_enable
Date: January 2025
Contact: Ziqi Chen <quic_ziqichen@quicinc.com>
Description:
This attribute shows whether the UFS clock gating is enabled or not.
And it can be used to enable/disable the clock gating by writing
1 or 0 to this attribute.
The attribute is read/write.
What: /sys/bus/platform/drivers/ufshcd/*/clkgate_delay_ms
What: /sys/bus/platform/devices/*.ufs/clkgate_delay_ms
Date: January 2025
Contact: Ziqi Chen <quic_ziqichen@quicinc.com>
Description:
This attribute shows and sets the number of milliseconds of idle time
before the UFS driver starts to perform clock gating. This can
prevent the UFS from frequently performing clock gating/ungating.
The attribute is read/write.
What: /sys/bus/platform/drivers/ufshcd/*/device_lvl_exception_count
What: /sys/bus/platform/devices/*.ufs/device_lvl_exception_count
Date: March 2025
Contact: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Description:
This attribute is applicable to ufs devices compliant to the
JEDEC specifications version 4.1 or later. The
device_lvl_exception_count is a counter indicating the number of
times the device level exceptions have occurred since the last
time this variable is reset. Writing a 0 value to this
attribute will reset the device_lvl_exception_count. If the
device_lvl_exception_count reads a positive value, the user
application should read the device_lvl_exception_id attribute to
know more information about the exception.
The attribute is read/write.
What: /sys/bus/platform/drivers/ufshcd/*/device_lvl_exception_id
What: /sys/bus/platform/devices/*.ufs/device_lvl_exception_id
Date: March 2025
Contact: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Description:
Reading the device_lvl_exception_id returns the
qDeviceLevelExceptionID attribute of the ufs device JEDEC
specification version 4.1. The definition of the
qDeviceLevelExceptionID is the ufs device vendor specific
implementation. Refer to the device manufacturer datasheet for
more information on the meaning of the qDeviceLevelExceptionID
attribute value.
The attribute is read only.
What: /sys/bus/platform/drivers/ufshcd/*/wb_resize_enable
What: /sys/bus/platform/devices/*.ufs/wb_resize_enable
Date: April 2025
Contact: Huan Tang <tanghuan@vivo.com>
Description:
The host can enable the WriteBooster buffer resize by setting this
attribute.
======== ======================================
idle There is no resize operation
decrease Decrease WriteBooster buffer size
increase Increase WriteBooster buffer size
======== ======================================
The file is write only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_resize_hint
What: /sys/bus/platform/devices/*.ufs/attributes/wb_resize_hint
Date: April 2025
Contact: Huan Tang <tanghuan@vivo.com>
Description:
wb_resize_hint indicates hint information about which type of resize
for WriteBooster buffer is recommended by the device.
========= ======================================
keep Recommend keep the buffer size
decrease Recommend to decrease the buffer size
increase Recommend to increase the buffer size
========= ======================================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/attributes/wb_resize_status
What: /sys/bus/platform/devices/*.ufs/attributes/wb_resize_status
Date: April 2025
Contact: Huan Tang <tanghuan@vivo.com>
Description:
The host can check the resize operation status of the WriteBooster
buffer by reading this attribute.
================ ========================================
idle Resize operation is not issued
in_progress Resize operation in progress
complete_success Resize operation completed successfully
general_failure Resize operation general failure
================ ========================================
The file is read only.
What: /sys/bus/platform/drivers/ufshcd/*/hid/analysis_trigger
What: /sys/bus/platform/devices/*.ufs/hid/analysis_trigger
Date: May 2025
Contact: Huan Tang <tanghuan@vivo.com>
Description:
The host can enable or disable HID analysis operation.
======= =========================================
disable disable HID analysis operation
enable enable HID analysis operation
======= =========================================
The file is write only.
What: /sys/bus/platform/drivers/ufshcd/*/hid/defrag_trigger
What: /sys/bus/platform/devices/*.ufs/hid/defrag_trigger
Date: May 2025
Contact: Huan Tang <tanghuan@vivo.com>
Description:
The host can enable or disable HID defragmentation operation.
======= =========================================
disable disable HID defragmentation operation
enable enable HID defragmentation operation
======= =========================================
The attribute is write only.
What: /sys/bus/platform/drivers/ufshcd/*/hid/fragmented_size
What: /sys/bus/platform/devices/*.ufs/hid/fragmented_size
Date: May 2025
Contact: Huan Tang <tanghuan@vivo.com>
Description:
The total fragmented size in the device is reported through
this attribute.
The attribute is read only.
What: /sys/bus/platform/drivers/ufshcd/*/hid/defrag_size
What: /sys/bus/platform/devices/*.ufs/hid/defrag_size
Date: May 2025
Contact: Huan Tang <tanghuan@vivo.com>
Description:
The host sets the size to be defragmented by an HID
defragmentation operation.
The attribute is read/write.
What: /sys/bus/platform/drivers/ufshcd/*/hid/progress_ratio
What: /sys/bus/platform/devices/*.ufs/hid/progress_ratio
Date: May 2025
Contact: Huan Tang <tanghuan@vivo.com>
Description:
Defragmentation progress is reported by this attribute,
indicates the ratio of the completed defragmentation size
over the requested defragmentation size.
==== ============================================
1 1%
...
100 100%
==== ============================================
The attribute is read only.
What: /sys/bus/platform/drivers/ufshcd/*/hid/state
What: /sys/bus/platform/devices/*.ufs/hid/state
Date: May 2025
Contact: Huan Tang <tanghuan@vivo.com>
Description:
The HID state is reported by this attribute.
==================== ===========================
idle Idle (analysis required)
analysis_in_progress Analysis in progress
defrag_required Defrag required
defrag_in_progress Defrag in progress
defrag_completed Defrag completed
defrag_not_required Defrag is not required
==================== ===========================
The attribute is read only.
Reference in New Issue View Git Blame Copy Permalink