mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
synced 2025-08-28 18:10:32 +00:00
loongarch-next
19805 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
beace86e61 |
Summary of significant series in this pull request:
- The 4 patch series "mm: ksm: prevent KSM from breaking merging of new
VMAs" from Lorenzo Stoakes addresses an issue with KSM's
PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for
merging with existing adjacent VMAs.
- The 4 patch series "mm/damon: introduce DAMON_STAT for simple and
practical access monitoring" from SeongJae Park adds a new kernel module
which simplifies the setup and usage of DAMON in production
environments.
- The 6 patch series "stop passing a writeback_control to swap/shmem
writeout" from Christoph Hellwig is a cleanup to the writeback code
which removes a couple of pointers from struct writeback_control.
- The 7 patch series "drivers/base/node.c: optimization and cleanups"
from Donet Tom contains largely uncorrelated cleanups to the NUMA node
setup and management code.
- The 4 patch series "mm: userfaultfd: assorted fixes and cleanups" from
Tal Zussman does some maintenance work on the userfaultfd code.
- The 5 patch series "Readahead tweaks for larger folios" from Ryan
Roberts implements some tuneups for pagecache readahead when it is
reading into order>0 folios.
- The 4 patch series "selftests/mm: Tweaks to the cow test" from Mark
Brown provides some cleanups and consistency improvements to the
selftests code.
- The 4 patch series "Optimize mremap() for large folios" from Dev Jain
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
- The 5 patch series "Remove zero_user()" from Matthew Wilcox expunges
zero_user() in favor of the more modern memzero_page().
- The 3 patch series "mm/huge_memory: vmf_insert_folio_*() and
vmf_insert_pfn_pud() fixes" from David Hildenbrand addresses some warts
which David noticed in the huge page code. These were not known to be
causing any issues at this time.
- The 3 patch series "mm/damon: use alloc_migrate_target() for
DAMOS_MIGRATE_{HOT,COLD" from SeongJae Park provides some cleanup and
consolidation work in DAMON.
- The 3 patch series "use vm_flags_t consistently" from Lorenzo Stoakes
uses vm_flags_t in places where we were inappropriately using other
types.
- The 3 patch series "mm/memfd: Reserve hugetlb folios before
allocation" from Vivek Kasireddy increases the reliability of large page
allocation in the memfd code.
- The 14 patch series "mm: Remove pXX_devmap page table bit and pfn_t
type" from Alistair Popple removes several now-unneeded PFN_* flags.
- The 5 patch series "mm/damon: decouple sysfs from core" from SeongJae
Park implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
- The 5 patch series "madvise cleanup" from Lorenzo Stoakes does quite a
lot of cleanup/maintenance work in the madvise() code.
- The 4 patch series "madvise anon_name cleanups" from Vlastimil Babka
provides additional cleanups on top or Lorenzo's effort.
- The 11 patch series "Implement numa node notifier" from Oscar Salvador
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory on/offline
notifier.
- The 6 patch series "Make MIGRATE_ISOLATE a standalone bit" from Zi Yan
cleans up the pageblock isolation code and fixes a potential issue which
doesn't seem to cause any problems in practice.
- The 5 patch series "selftests/damon: add python and drgn based DAMON
sysfs functionality tests" from SeongJae Park adds additional drgn- and
python-based DAMON selftests which are more comprehensive than the
existing selftest suite.
- The 5 patch series "Misc rework on hugetlb faulting path" from Oscar
Salvador fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
- The 3 patch series "cma: factor out allocation logic from
__cma_declare_contiguous_nid" from Mike Rapoport rationalizes and cleans
up the highmem-specific code in the CMA allocator.
- The 28 patch series "mm/migration: rework movable_ops page migration
(part 1)" from David Hildenbrand provides cleanups and
future-preparedness to the migration code.
- The 2 patch series "mm/damon: add trace events for auto-tuned
monitoring intervals and DAMOS quota" from SeongJae Park adds some
tracepoints to some DAMON auto-tuning code.
- The 6 patch series "mm/damon: fix misc bugs in DAMON modules" from
SeongJae Park does that.
- The 6 patch series "mm/damon: misc cleanups" from SeongJae Park also
does what it claims.
- The 4 patch series "mm: folio_pte_batch() improvements" from David
Hildenbrand cleans up the large folio PTE batching code.
- The 13 patch series "mm/damon/vaddr: Allow interleaving in
migrate_{hot,cold} actions" from SeongJae Park facilitates dynamic
alteration of DAMON's inter-node allocation policy.
- The 3 patch series "Remove unmap_and_put_page()" from Vishal Moola
provides a couple of page->folio conversions.
- The 4 patch series "mm: per-node proactive reclaim" from Davidlohr
Bueso implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
- The 14 patch series "mm/damon: remove damon_callback" from SeongJae
Park replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
- The 10 patch series "mm/mremap: permit mremap() move of multiple VMAs"
from Lorenzo Stoakes implements a number of mremap cleanups (of course)
in preparation for adding new mremap() functionality: newly permit the
remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It
still excludes some specialized situations where this cannot be
performed reliably.
- The 3 patch series "drop hugetlb_free_pgd_range()" from Anthony Yznaga
switches some sparc hugetlb code over to the generic version and removes
the thus-unneeded hugetlb_free_pgd_range().
- The 4 patch series "mm/damon/sysfs: support periodic and automated
stats update" from SeongJae Park augments the present
userspace-requested update of DAMON sysfs monitoring files. Automatic
update is now provided, along with a tunable to control the update
interval.
- The 4 patch series "Some randome fixes and cleanups to swapfile" from
Kemeng Shi does what is claims.
- The 4 patch series "mm: introduce snapshot_page" from Luiz Capitulino
and David Hildenbrand provides (and uses) a means by which debug-style
functions can grab a copy of a pageframe and inspect it locklessly
without tripping over the races inherent in operating on the live
pageframe directly.
- The 6 patch series "use per-vma locks for /proc/pid/maps reads" from
Suren Baghdasaryan addresses the large contention issues which can be
triggered by reads from that procfs file. Latencies are reduced by more
than half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
- The 6 patch series "__folio_split() clean up" from Zi Yan cleans up
__folio_split()!
- The 7 patch series "Optimize mprotect() for large folios" from Dev
Jain provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
- The 2 patch series "selftests/mm: reuse FORCE_READ to replace "asm
volatile("" : "+r" (XXX));" and some cleanup" from wang lian does some
cleanup work in the selftests code.
- The 3 patch series "tools/testing: expand mremap testing" from Lorenzo
Stoakes extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
- The 22 patch series "selftests/damon/sysfs.py: test all parameters"
from SeongJae Park extends the DAMON sysfs interface selftest so that it
tests all possible user-requested parameters. Rather than the present
minimal subset.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaIqcCgAKCRDdBJ7gKXxA
jkVBAQCCn9DR1QP0CRk961ot0cKzOgioSc0aA03DPb2KXRt2kQEAzDAz0ARurFhL
8BzbvI0c+4tntHLXvIlrC33n9KWAOQM=
=XsFy
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
||
|
Jiri Kosina
|
ddb7a62af2 |
Merge branch 'for-6.17/selftests' into for-linus
- upgrade the python scripts in hid-selftests to match hid-tools version 0.10 (Benjamin Tissoires) |
||
|
Jiri Kosina
|
e9ef810dfe |
Merge branch 'for-6.17/amd-sfh' into for-linus
- add support for operating modes (Basavaraj Natikar) |
||
|
Linus Torvalds
|
c93529ad4f |
iommufd 6.17 merge window pull
- IOMMU HW now has features to directly assign HW command queues to a
guest VM. In this mode the command queue operates on a limited set of
invalidation commands that are suitable for improving guest invalidation
performance and easy for the HW to virtualize.
This PR brings the generic infrastructure to allow IOMMU drivers to
expose such command queues through the iommufd uAPI, mmap the doorbell
pages, and get the guest physical range for the command queue ring
itself.
- An implementation for the NVIDIA SMMUv3 extension "cmdqv" is built on
the new iommufd command queue features. It works with the existing SMMU
driver support for cmdqv in guest VMs.
- Many precursor cleanups and improvements to support the above cleanly,
changes to the general ioctl and object helpers, driver support for
VDEVICE, and mmap pgoff cookie infrastructure.
- Sequence VDEVICE destruction to always happen before VFIO device
destruction. When using the above type features, and also in future
confidential compute, the internal virtual device representation becomes
linked to HW or CC TSM configuration and objects. If a VFIO device is
removed from iommufd those HW objects should also be cleaned up to
prevent a sort of UAF. This became important now that we have HW backing
the VDEVICE.
- Fix one syzkaller found error related to math overflows during iova
allocation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaIpl9AAKCRCFwuHvBreF
YS5tAP9MDIRML5a/2IOhzcsc4LiDkWTMKm2m1wcRYd+iU2aFVQEAjdghINLHrUlx
HVuIDvNvWIUED/oTAp5kCxQ7PBFN4gU=
=NmCO
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"This broadly brings the assigned HW command queue support to iommufd.
This feature is used to improve SVA performance in VMs by avoiding
paravirtualization traps during SVA invalidations.
Along the way I think some of the core logic is in a much better state
to support future driver backed features.
Summary:
- IOMMU HW now has features to directly assign HW command queues to a
guest VM. In this mode the command queue operates on a limited set
of invalidation commands that are suitable for improving guest
invalidation performance and easy for the HW to virtualize.
This brings the generic infrastructure to allow IOMMU drivers to
expose such command queues through the iommufd uAPI, mmap the
doorbell pages, and get the guest physical range for the command
queue ring itself.
- An implementation for the NVIDIA SMMUv3 extension "cmdqv" is built
on the new iommufd command queue features. It works with the
existing SMMU driver support for cmdqv in guest VMs.
- Many precursor cleanups and improvements to support the above
cleanly, changes to the general ioctl and object helpers, driver
support for VDEVICE, and mmap pgoff cookie infrastructure.
- Sequence VDEVICE destruction to always happen before VFIO device
destruction. When using the above type features, and also in future
confidential compute, the internal virtual device representation
becomes linked to HW or CC TSM configuration and objects. If a VFIO
device is removed from iommufd those HW objects should also be
cleaned up to prevent a sort of UAF. This became important now that
we have HW backing the VDEVICE.
- Fix one syzkaller found error related to math overflows during iova
allocation"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (57 commits)
iommu/arm-smmu-v3: Replace vsmmu_size/type with get_viommu_size
iommu/arm-smmu-v3: Do not bother impl_ops if IOMMU_VIOMMU_TYPE_ARM_SMMUV3
iommufd: Rename some shortterm-related identifiers
iommufd/selftest: Add coverage for vdevice tombstone
iommufd/selftest: Explicitly skip tests for inapplicable variant
iommufd/vdevice: Remove struct device reference from struct vdevice
iommufd: Destroy vdevice on idevice destroy
iommufd: Add a pre_destroy() op for objects
iommufd: Add iommufd_object_tombstone_user() helper
iommufd/viommu: Roll back to use iommufd_object_alloc() for vdevice
iommufd/selftest: Test reserved regions near ULONG_MAX
iommufd: Prevent ALIGN() overflow
iommu/tegra241-cmdqv: import IOMMUFD module namespace
iommufd: Do not allow _iommufd_object_alloc_ucmd if abort op is set
iommu/tegra241-cmdqv: Add IOMMU_VEVENTQ_TYPE_TEGRA241_CMDQV support
iommu/tegra241-cmdqv: Add user-space use support
iommu/tegra241-cmdqv: Do not statically map LVCMDQs
iommu/tegra241-cmdqv: Simplify deinit flow in tegra241_cmdqv_remove_vintf()
iommu/tegra241-cmdqv: Use request_threaded_irq
iommu/arm-smmu-v3-iommufd: Add hw_info to impl_ops
...
|
||
|
WangYuli
|
6260da0468 |
selftests: ALSA: fix memory leak in utimer test
Free the malloc'd buffer in TEST_F(timer_f, utimer) to prevent
memory leak.
Fixes:
|
||
|
Linus Torvalds
|
63eb28bb14 |
ARM:
- Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts. - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface. - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally. - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range. - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor. - Convert more system register sanitization to the config-driven implementation. - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls. - Various cleanups and minor fixes. LoongArch: - Add stat information for in-kernel irqchip - Add tracepoints for CPUCFG and CSR emulation exits - Enhance in-kernel irqchip emulation - Various cleanups. RISC-V: - Enable ring-based dirty memory tracking - Improve perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU improvements related to upcoming nested virtualization s390x - Fixes x86: - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time. - Share device posted IRQ code between SVM and VMX and harden it against bugs and runtime errors. - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n). - For MMIO stale data mitigation, track whether or not a vCPU has access to (host) MMIO based on whether the page tables have MMIO pfns mapped; using VFIO is prone to false negatives - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical. - Recalculate all MSR intercepts from scratch on MSR filter changes, instead of maintaining shadow bitmaps. - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently. - Fix a user-triggerable WARN that syzkaller found by setting the vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU into VMX Root Mode (post-VMXON). Trying to detect every possible path leading to architecturally forbidden states is hard and even risks breaking userspace (if it goes from valid to valid state but passes through invalid states), so just wait until KVM_RUN to detect that the vCPU state isn't allowed. - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can access APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed on vCPU creation or saved/restored on suspend and resume, or preserved over thread migration let alone VM migration) but can be useful whenever you're interested in letting Linux guests see the effective physical CPU frequency in /proc/cpuinfo. - Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been created, as there's no known use case for changing the default frequency for other VM types and it goes counter to the very reason why the ioctl was added to the vm file descriptor. And also, there would be no way to make it work for confidential VMs with a "secure" TSC, so kill two birds with one stone. - Dynamically allocation the shadow MMU's hashed page list, and defer allocating the hashed list until it's actually needed (the TDP MMU doesn't use the list). - Extract many of KVM's helpers for accessing architectural local APIC state to common x86 so that they can be shared by guest-side code for Secure AVIC. - Various cleanups and fixes. x86 (Intel): - Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest. Failure to honor FREEZE_IN_SMM can leak host state into guests. - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF. x86 (AMD): - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty much a static condition and therefore should never happen, but still). - Fix a variety of flaws and bugs in the AVIC device posted IRQ code. - Inhibit AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation. - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry. - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs. - Request GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU. - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model. - Accept any SNP policy that is accepted by the firmware with respect to SMT and single-socket restrictions. An incompatible policy doesn't put the kernel at risk in any way, so there's no reason for KVM to care. - Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and use WBNOINVD instead of WBINVD when possible for SEV cache maintenance. - When reclaiming memory from an SEV guest, only do cache flushes on CPUs that have ever run a vCPU for the guest, i.e. don't flush the caches for CPUs that can't possibly have cache lines with dirty, encrypted data. Generic: - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI. - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand. - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs. - Clean up and document/comment the irqfd assignment code. - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique. - Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues related to private <=> shared memory conversions. - Drop guest_memfd's .getattr() implementation as the VFS layer will call generic_fillattr() if inode_operations.getattr is NULL. - Fix issues with dirty ring harvesting where KVM doesn't bound the processing of entries in any way, which allows userspace to keep KVM in a tight loop indefinitely. - Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking, now that KVM no longer uses assigned_device_count as a heuristic for either irqbypass usage or MDS mitigation. Selftests: - Fix a comment typo. - Verify KVM is loaded when getting any KVM module param so that attempting to run a selftest without kvm.ko loaded results in a SKIP message about KVM not being loaded/enabled (versus some random parameter not existing). - Skip tests that hit EACCES when attempting to access a file, and rpint a "Root required?" help message. In most cases, the test just needs to be run with elevated permissions. -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmiKXMgUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroMhMQf/QDhC/CP1aGXph2whuyeD2NMqPKiU 9KdnDNST+ftPwjg9QxZ9mTaa8zeVz/wly6XlxD9OQHy+opM1wcys3k0GZAFFEEQm YrThgURdzEZ3nwJZgb+m0t4wjJQtpiFIBwAf7qq6z1VrqQBEmHXJ/8QxGuqO+BNC j5q/X+q6KZwehKI6lgFBrrOKWFaxqhnRAYfW6rGBxRXxzTJuna37fvDpodQnNceN zOiq+avfriUMArTXTqOteJNKU0229HjiPSnjILLnFQ+B3akBlwNG0jk7TMaAKR6q IZWG1EIS9q1BAkGXaw6DE1y6d/YwtXCR5qgAIkiGwaPt5yj9Oj6kRN2Ytw== =j2At -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "ARM: - Host driver for GICv5, the next generation interrupt controller for arm64, including support for interrupt routing, MSIs, interrupt translation and wired interrupts - Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on GICv5 hardware, leveraging the legacy VGIC interface - Userspace control of the 'nASSGIcap' GICv3 feature, allowing userspace to disable support for SGIs w/o an active state on hardware that previously advertised it unconditionally - Map supporting endpoints with cacheable memory attributes on systems with FEAT_S2FWB and DIC where KVM no longer needs to perform cache maintenance on the address range - Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest hypervisor to inject external aborts into an L2 VM and take traps of masked external aborts to the hypervisor - Convert more system register sanitization to the config-driven implementation - Fixes to the visibility of EL2 registers, namely making VGICv3 system registers accessible through the VGIC device instead of the ONE_REG vCPU ioctls - Various cleanups and minor fixes LoongArch: - Add stat information for in-kernel irqchip - Add tracepoints for CPUCFG and CSR emulation exits - Enhance in-kernel irqchip emulation - Various cleanups RISC-V: - Enable ring-based dirty memory tracking - Improve perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU improvements related to upcoming nested virtualization s390x - Fixes x86: - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time - Share device posted IRQ code between SVM and VMX and harden it against bugs and runtime errors - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n) - For MMIO stale data mitigation, track whether or not a vCPU has access to (host) MMIO based on whether the page tables have MMIO pfns mapped; using VFIO is prone to false negatives - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical - Recalculate all MSR intercepts from scratch on MSR filter changes, instead of maintaining shadow bitmaps - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently - Fix a user-triggerable WARN that syzkaller found by setting the vCPU in INIT_RECEIVED state (aka wait-for-SIPI), and then putting the vCPU into VMX Root Mode (post-VMXON). Trying to detect every possible path leading to architecturally forbidden states is hard and even risks breaking userspace (if it goes from valid to valid state but passes through invalid states), so just wait until KVM_RUN to detect that the vCPU state isn't allowed - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can access APERF/MPERF. This has many caveats (APERF/MPERF cannot be zeroed on vCPU creation or saved/restored on suspend and resume, or preserved over thread migration let alone VM migration) but can be useful whenever you're interested in letting Linux guests see the effective physical CPU frequency in /proc/cpuinfo - Reject KVM_SET_TSC_KHZ for vm file descriptors if vCPUs have been created, as there's no known use case for changing the default frequency for other VM types and it goes counter to the very reason why the ioctl was added to the vm file descriptor. And also, there would be no way to make it work for confidential VMs with a "secure" TSC, so kill two birds with one stone - Dynamically allocation the shadow MMU's hashed page list, and defer allocating the hashed list until it's actually needed (the TDP MMU doesn't use the list) - Extract many of KVM's helpers for accessing architectural local APIC state to common x86 so that they can be shared by guest-side code for Secure AVIC - Various cleanups and fixes x86 (Intel): - Preserve the host's DEBUGCTL.FREEZE_IN_SMM when running the guest. Failure to honor FREEZE_IN_SMM can leak host state into guests - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF x86 (AMD): - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR (which is pretty much a static condition and therefore should never happen, but still) - Fix a variety of flaws and bugs in the AVIC device posted IRQ code - Inhibit AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs - Request GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model - Accept any SNP policy that is accepted by the firmware with respect to SMT and single-socket restrictions. An incompatible policy doesn't put the kernel at risk in any way, so there's no reason for KVM to care - Drop a superfluous WBINVD (on all CPUs!) when destroying a VM and use WBNOINVD instead of WBINVD when possible for SEV cache maintenance - When reclaiming memory from an SEV guest, only do cache flushes on CPUs that have ever run a vCPU for the guest, i.e. don't flush the caches for CPUs that can't possibly have cache lines with dirty, encrypted data Generic: - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs - Clean up and document/comment the irqfd assignment code - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique - Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues related to private <=> shared memory conversions - Drop guest_memfd's .getattr() implementation as the VFS layer will call generic_fillattr() if inode_operations.getattr is NULL - Fix issues with dirty ring harvesting where KVM doesn't bound the processing of entries in any way, which allows userspace to keep KVM in a tight loop indefinitely - Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking, now that KVM no longer uses assigned_device_count as a heuristic for either irqbypass usage or MDS mitigation Selftests: - Fix a comment typo - Verify KVM is loaded when getting any KVM module param so that attempting to run a selftest without kvm.ko loaded results in a SKIP message about KVM not being loaded/enabled (versus some random parameter not existing) - Skip tests that hit EACCES when attempting to access a file, and print a "Root required?" help message. In most cases, the test just needs to be run with elevated permissions" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (340 commits) Documentation: KVM: Use unordered list for pre-init VGIC registers RISC-V: KVM: Avoid re-acquiring memslot in kvm_riscv_gstage_map() RISC-V: KVM: Use find_vma_intersection() to search for intersecting VMAs RISC-V: perf/kvm: Add reporting of interrupt events RISC-V: KVM: Enable ring-based dirty memory tracking RISC-V: KVM: Fix inclusion of Smnpm in the guest ISA bitmap RISC-V: KVM: Delegate illegal instruction fault to VS mode RISC-V: KVM: Pass VMID as parameter to kvm_riscv_hfence_xyz() APIs RISC-V: KVM: Factor-out g-stage page table management RISC-V: KVM: Add vmid field to struct kvm_riscv_hfence RISC-V: KVM: Introduce struct kvm_gstage_mapping RISC-V: KVM: Factor-out MMU related declarations into separate headers RISC-V: KVM: Use ncsr_xyz() in kvm_riscv_vcpu_trap_redirect() RISC-V: KVM: Implement kvm_arch_flush_remote_tlbs_range() RISC-V: KVM: Don't flush TLB when PTE is unchanged RISC-V: KVM: Replace KVM_REQ_HFENCE_GVMA_VMID_ALL with KVM_REQ_TLB_FLUSH RISC-V: KVM: Rename and move kvm_riscv_local_tlb_sanitize() RISC-V: KVM: Drop the return value of kvm_riscv_vcpu_aia_init() RISC-V: KVM: Check kvm_riscv_vcpu_alloc_vector_context() return value KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list ... |
||
|
Linus Torvalds
|
2223228bb1 |
ktest updates for v6.17
- Add new -D option that allows to override variables and options
For example:
./ktest.pl -DPATCH_START:=HEAD~1 -DOUTPUT_DIR=/work/build/urgent config
The above sets the variable "PATCH_START" to HEAD~1 and the OUTPUT_DIR
option to "/work/build/urgent".
This is useful because currently the only way to make a slight change to a
config file is by modifying that config file. For one time changes, this
can be annoying. Having a way to do a one time override from the command
line simplifies the workflow.
Temp variables (PATCH_START) will override every temp variable in the
config file, whereas options will act like a normal OVERRIDE option and
will only affect the session they define.
-DBUILD_OUTPUT=/work/git/linux.git
Replaces the default BUILD_OUTPUT option.
'-DBUILD_OUTPUT[2]=/work/git/linux.git'
Only replaces the BUILD_OUTPUT variable for test #2.
- If an option contains itself, just drop it instead of going into an
infinite loop and failing to parse (it doesn't crash, it detects the
recursion after 100 iterations anyway).
Some configs may define a variable with the same name as the option:
ADD_CONFIG := $(ADD_CONFIG)
But if the option doesn't exist, it the above will fail to parse. In these
cases, just ignore evaluating the option inside the definition of another
option if it has the same name.
- Display the BUILD_DIR and OUTPUT_DIR options at the start of every test
It is useful to know which kernel source and what destination a test is
using when it starts, in case a mistake is made. This makes it easier to
abort the test if the wrong source or destination is being used instead of
waiting until the test completes.
- Add new PATCHCHECK_SKIP option
When testing a series of commits that also includes changes to the Linux
tools directory, it is useless to test the changes in tools as they may
not affect the kernel itself. Doing tests on the kernel for changes that
do not affect the kernel is a waste of time.
Add a PATCHCHECK_SKIP that takes a series of shas that will be skipped
while doing the individual commit tests.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIjO+hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmJiAP93udmfI+j4+IcyrYg6hkm2F+stakot
7TgM/YCgB8tTSAEA4iMGkAGxEUlHVv5Has7JFW1ajsqk2ZHlXlu9lSxvVwg=
=JDuF
-----END PGP SIGNATURE-----
Merge tag 'ktest-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Add new -D option that allows to override variables and options
For example:
./ktest.pl -DPATCH_START:=HEAD~1 -DOUTPUT_DIR=/work/build/urgent config
The above sets the variable "PATCH_START" to HEAD~1 and the
OUTPUT_DIR option to "/work/build/urgent".
This is useful because currently the only way to make a slight change
to a config file is by modifying that config file. For one time
changes, this can be annoying. Having a way to do a one time override
from the command line simplifies the workflow.
Temp variables (PATCH_START) will override every temp variable in the
config file, whereas options will act like a normal OVERRIDE option
and will only affect the session they define.
-DBUILD_OUTPUT=/work/git/linux.git
Replaces the default BUILD_OUTPUT option.
'-DBUILD_OUTPUT[2]=/work/git/linux.git'
Only replaces the BUILD_OUTPUT variable for test #2.
- If an option contains itself, just drop it instead of going into an
infinite loop and failing to parse (it doesn't crash, it detects the
recursion after 100 iterations anyway).
Some configs may define a variable with the same name as the option:
ADD_CONFIG := $(ADD_CONFIG)
But if the option doesn't exist, it the above will fail to parse. In
these cases, just ignore evaluating the option inside the definition
of another option if it has the same name.
- Display the BUILD_DIR and OUTPUT_DIR options at the start of every
test
It is useful to know which kernel source and what destination a test
is using when it starts, in case a mistake is made. This makes it
easier to abort the test if the wrong source or destination is being
used instead of waiting until the test completes.
- Add new PATCHCHECK_SKIP option
When testing a series of commits that also includes changes to the
Linux tools directory, it is useless to test the changes in tools as
they may not affect the kernel itself. Doing tests on the kernel for
changes that do not affect the kernel is a waste of time.
Add a PATCHCHECK_SKIP that takes a series of shas that will be
skipped while doing the individual commit tests.
* tag 'ktest-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Add new PATCHCHECK_SKIP option to skip testing individual commits
ktest.pl: Always display BUILD_DIR and OUTPUT_DIR at the start of tests
ktest.pl: Prevent recursion of default variable options
ktest.pl: Have -D option work without a space
ktest.pl: Allow command option -D to override temp variables
ktest.pl: Add -D option to override options
|
||
|
Linus Torvalds
|
b7dbc2e813 |
Probes updates for v6.17:
- Stack usage reduction for probe events:
- Allocate string buffers from the heap for uprobe, eprobe, kprobe,
and fprobe events to avoid stack overflow.
- Allocate traceprobe_parse_context from the heap to prevent
potential stack overflow.
- Fix a typo in the above commit.
- New features for eprobe and tprobe events:
- Add support for arrays in eprobes.
- Support multiple tprobes on the same tracepoint.
- Improve efficiency:
- Register fprobe-events only when it is enabled to reduce overhead.
- Register tracepoints for tprobe events only when enabled to
resolve a lock dependency.
- Code Cleanup:
- Add kerneldoc for traceprobe_parse_event_name() and __get_insn_slot().
- Sort #include alphabetically in the probes code.
- Remove the unused 'mod' field from the tprobe-event.
- Clean up the entry-arg storing code in probe-events.
- Selftest update
- Enable fprobe events before checking enable_functions in selftests.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmiJ2DQbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bSfkH/06Zn5I55rU85FKSBQll
FN4hipmef/9Nd13skDwpEuFyzLPNS4P1up/UBUuyDQUTlO74+t2zSFO2dpcNrWmu
sPTenQ+6h82H3K591WTIC23VzF54syIbFLXEj8iMBALT3wyU4Nn0bs4DCbnTo5HX
R3NVo77rk6wxNJoKYOtT6ALf/lHonuNlGF+KTUGWP8UbWsIY3fIp0RWWy572M0bt
+YBE8D8RIVrw+ZY+vNKn1LdZdWlR1ton518XDf1gV9isTCfKErcd/6HJKwuj5q2v
qMgwiaKK+Gne/ylAKmWLEg2oNDo7kpyfW+612oiECitgZkqxOXhyYYfWgRt1lFNp
Wb8=
=E+Z6
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Stack usage reduction for probe events:
- Allocate string buffers from the heap for uprobe, eprobe, kprobe,
and fprobe events to avoid stack overflow
- Allocate traceprobe_parse_context from the heap to prevent
potential stack overflow
- Fix a typo in the above commit
New features for eprobe and tprobe events:
- Add support for arrays in eprobes
- Support multiple tprobes on the same tracepoint
Improve efficiency:
- Register fprobe-events only when it is enabled to reduce overhead
- Register tracepoints for tprobe events only when enabled to resolve
a lock dependency
Code Cleanup:
- Add kerneldoc for traceprobe_parse_event_name() and
__get_insn_slot()
- Sort #include alphabetically in the probes code
- Remove the unused 'mod' field from the tprobe-event
- Clean up the entry-arg storing code in probe-events
Selftest update
- Enable fprobe events before checking enable_functions in selftests"
* tag 'probes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: trace_fprobe: Fix typo of the semicolon
tracing: Have eprobes handle arrays
tracing: probes: Add a kerneldoc for traceprobe_parse_event_name()
tracing: uprobe-event: Allocate string buffers from heap
tracing: eprobe-event: Allocate string buffers from heap
tracing: kprobe-event: Allocate string buffers from heap
tracing: fprobe-event: Allocate string buffers from heap
tracing: probe: Allocate traceprobe_parse_context from heap
tracing: probes: Sort #include alphabetically
kprobes: Add missing kerneldoc for __get_insn_slot
tracing: tprobe-events: Register tracepoint when enable tprobe event
selftests: tracing: Enable fprobe events before checking enable_functions
tracing: fprobe-events: Register fprobe-events only when it is enabled
tracing: tprobe-events: Support multiple tprobes on the same tracepoint
tracing: tprobe-events: Remove mod field from tprobe-event
tracing: probe-events: Cleanup entry-arg storing code
|
||
|
Linus Torvalds
|
2db4df0c09 |
RCU pull request for v6.17
This pull request contains the following branches:
rcu-exp.23.07.2025
- Protect against early RCU exp quiescent state reporting during exp
grace period initialization.
- Remove superfluous barrier in task unblock path.
- Remove the CPU online quiescent state report optimization, which is
error prone for certain scenarios.
- Add warning for unexpected pending requested expedited quiescent
state on dying CPU.
rcu.22.07.2025
- Robustify rcu_is_cpu_rrupt_from_idle() by using more accurate
indicators of the actual context tracking state of a CPU.
- Handle ->defer_qs_iw_pending field data race.
- Enable rcu_normal_wake_from_gp by default on systems with <= 16 CPUs.
- Fix lockup in rcu_read_unlock() due to recursive irq_exit() calls.
- Refactor expedited handling condition in rcu_read_unlock_special().
- Documentation updates for hotplug and GP init scan ordering,
separation of rcu_state and rnp's gp_seq states, quiescent state
reporting for offline CPUs.
torture-scripts.16.07.2025
- Cleanup and improve scripts : remove superfluous warnings for disabled
tests; better handling of kvm.sh --kconfig arg; suppress some confusing
diagnostics; tolerate bad kvm.sh args; add new diagnostic for build
output; fail allmodconfig testing on warnings.
- Include RCU_TORTURE_TEST_CHK_RDR_STATE config for KCSAN kernels.
- Disable default RCU-tasks and clocksource-wdog testing on arm64.
- Add EXPERT Kconfig option for arm64 KCSAN runs.
- Remove SRCU-lite testing.
rcutorture.16.07.2025
- Start torture writer threads creation after reader threads to handle
race in SRCU-P scenario.
- Add SRCU down_read()/up_read() test.
- Add diagnostics for delayed SRCU up_read(), unmatched up_read(), print
number of up/down readers and the number of such readers which
migrated to other CPU.
- Ignore certain unsupported configurations for trivial RCU test.
- Fix splats in RT kernels due to inaccurate checks for BH-disabled
context.
- Enable checks and logs to capture intentionally exercised unexpected
scenarios (too short readers) for BUSTED test.
- Remove SRCU-lite testing.
srcu.19.07.2025
- Expedite SRCU-fast grace periods.
- Remove SRCU-lite implementation.
- Add guards for SRCU-fast readers.
rcu.nocb.18.07.2025
- Dump NOCB group leader state on stall detection.
- Robustify nocb_cb_kthread pointer accesses.
- Fix delayed execution of hurry callbacks when LAZY_RCU is enabled.
refscale.07.07.2025
- Fix multiplication overflow in "loops" and "nreaders" calculations.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSi2tPIQIc2VEtjarIAHS7/6Z0wpQUCaINnRwAKCRAAHS7/6Z0w
pRYJAQC97ZDW2wBegDbQPsg5ECLX9Lyd6+IC65sdi38IENl+TQEA4/oMzUUceIH+
CDCnxv3fAMhPncJfvIukOLzMJpKw0go=
=8t4O
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Neeraj Upadhyay:
"Expedited grace period updates:
- Protect against early RCU exp quiescent state reporting during exp
grace period initialization
- Remove superfluous barrier in task unblock path
- Remove the CPU online quiescent state report optimization, which is
error prone for certain scenarios
- Add warning for unexpected pending requested expedited quiescent
state on dying CPU
Core:
- Robustify rcu_is_cpu_rrupt_from_idle() by using more accurate
indicators of the actual context tracking state of a CPU
- Handle ->defer_qs_iw_pending field data race
- Enable rcu_normal_wake_from_gp by default on systems with <= 16
CPUs
- Fix lockup in rcu_read_unlock() due to recursive irq_exit() calls
- Refactor expedited handling condition in rcu_read_unlock_special()
- Documentation updates for hotplug and GP init scan ordering,
separation of rcu_state and rnp's gp_seq states, quiescent state
reporting for offline CPUs
torture-scripts:
- Cleanup and improve scripts : remove superfluous warnings for
disabled tests; better handling of kvm.sh --kconfig arg; suppress
some confusing diagnostics; tolerate bad kvm.sh args; add new
diagnostic for build output; fail allmodconfig testing on warnings
- Include RCU_TORTURE_TEST_CHK_RDR_STATE config for KCSAN kernels
- Disable default RCU-tasks and clocksource-wdog testing on arm64
- Add EXPERT Kconfig option for arm64 KCSAN runs
- Remove SRCU-lite testing
rcutorture:
- Start torture writer threads creation after reader threads to
handle race in SRCU-P scenario
- Add SRCU down_read()/up_read() test
- Add diagnostics for delayed SRCU up_read(), unmatched up_read(),
print number of up/down readers and the number of such readers
which migrated to other CPU
- Ignore certain unsupported configurations for trivial RCU test
- Fix splats in RT kernels due to inaccurate checks for BH-disabled
context
- Enable checks and logs to capture intentionally exercised
unexpected scenarios (too short readers) for BUSTED test
- Remove SRCU-lite testing
srcu:
- Expedite SRCU-fast grace periods
- Remove SRCU-lite implementation
- Add guards for SRCU-fast readers
rcu nocb:
- Dump NOCB group leader state on stall detection
- Robustify nocb_cb_kthread pointer accesses
- Fix delayed execution of hurry callbacks when LAZY_RCU is enabled
refscale:
- Fix multiplication overflow in "loops" and "nreaders" calculations"
* tag 'rcu.release.v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (49 commits)
rcu: Document concurrent quiescent state reporting for offline CPUs
rcu: Document separation of rcu_state and rnp's gp_seq
rcu: Document GP init vs hotplug-scan ordering requirements
srcu: Add guards for SRCU-fast readers
rcu: Fix delayed execution of hurry callbacks
rcu: Refactor expedited handling check in rcu_read_unlock_special()
checkpatch: Remove SRCU-lite deprecation
srcu: Remove SRCU-lite implementation
srcu: Expedite SRCU-fast grace periods
rcutorture: Remove support for SRCU-lite
rcutorture: Remove SRCU-lite scenarios
torture: Remove support for SRCU-lite
torture: Make torture.sh --allmodconfig testing fail on warnings
torture: Add "ERROR" diagnostic for testing kernel-build output
torture: Make torture.sh tolerate runs having bad kvm.sh arguments
torture: Add textid.txt file to --do-allmodconfig and --do-rcu-rust runs
torture: Extract testid.txt generation to separate script
torture: Suppress "find" diagnostics from torture.sh --do-none run
torture: Provide EXPERT Kconfig option for arm64 KCSAN torture.sh runs
rcu: Fix rcu_read_unlock() deadloop due to IRQ work
...
|
||
|
Linus Torvalds
|
d9104cec3e |
bpf-next-6.17
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmiINnEACgkQ6rmadz2v bToBnA/9F+A3R6rTwGk4HK3xpfc/nm2Tanl3oRN7S2ub/mskDOtWSIyG6cVFZ0UG 1fK6IkByyRIpAF/5qhdlw8drRXHkQtGLA0lP2L9llm4X1mHLofB18y9OeLrDE1WN KwNP06+IGX9W802lCGSIXOY+VmRscVfXSMokyQt2ilHplKjOnDqJcYkWupi3T2rC mz79FY9aEl2YrIcpj9RXz+8nwP49pZBuW2P0IM5PAIj4BJBXShrUp8T1nz94okNe NFsnAyRxjWpUT0McEgtA9WvpD9lZqujYD8Qp0KlGZWmI3vNpV5d9S1+dBcEb1n7q dyNMkTF3oRrJhhg4VqoHc6fVpzSEoZ9ZxV5Hx4cs+ganH75D4YbdGqx/7mR3DUgH MZh6rHF1pGnK7TAm7h5gl3ZRAOkZOaahbe1i01NKo9CEe5fSh3AqMyzJYoyGHRKi xDN39eQdWBNA+hm1VkbK2Bv93Rbjrka2Kj+D3sSSO9Bo/u3ntcknr7LW39idKz62 Q8dkKHcCEtun7gjk0YXPF013y81nEohj1C+52BmJ2l5JitM57xfr6YOaQpu7DPDE AJbHx6ASxKdyEETecd0b+cXUPQ349zmRXy0+CDMAGKpBicC0H0mHhL14cwOY1Hfu EIpIjmIJGI3JNF6T5kybcQGSBOYebdV0FFgwSllzPvuYt7YsHCs= =/O3j -----END PGP SIGNATURE----- Merge tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Pull bpf updates from Alexei Starovoitov: - Remove usermode driver (UMD) framework (Thomas Weißschuh) - Introduce Strongly Connected Component (SCC) in the verifier to detect loops and refine register liveness (Eduard Zingerman) - Allow 'void *' cast using bpf_rdonly_cast() and corresponding '__arg_untrusted' for global function parameters (Eduard Zingerman) - Improve precision for BPF_ADD and BPF_SUB operations in the verifier (Harishankar Vishwanathan) - Teach the verifier that constant pointer to a map cannot be NULL (Ihor Solodrai) - Introduce BPF streams for error reporting of various conditions detected by BPF runtime (Kumar Kartikeya Dwivedi) - Teach the verifier to insert runtime speculation barrier (lfence on x86) to mitigate speculative execution instead of rejecting the programs (Luis Gerhorst) - Various improvements for 'veristat' (Mykyta Yatsenko) - For CONFIG_DEBUG_KERNEL config warn on internal verifier errors to improve bug detection by syzbot (Paul Chaignon) - Support BPF private stack on arm64 (Puranjay Mohan) - Introduce bpf_cgroup_read_xattr() kfunc to read xattr of cgroup's node (Song Liu) - Introduce kfuncs for read-only string opreations (Viktor Malik) - Implement show_fdinfo() for bpf_links (Tao Chen) - Reduce verifier's stack consumption (Yonghong Song) - Implement mprog API for cgroup-bpf programs (Yonghong Song) * tag 'bpf-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (192 commits) selftests/bpf: Migrate fexit_noreturns case into tracing_failure test suite selftests/bpf: Add selftest for attaching tracing programs to functions in deny list bpf: Add log for attaching tracing programs to functions in deny list bpf: Show precise rejected function when attaching fexit/fmod_ret to __noreturn functions bpf: Fix various typos in verifier.c comments bpf: Add third round of bounds deduction selftests/bpf: Test invariants on JSLT crossing sign selftests/bpf: Test cross-sign 64bits range refinement selftests/bpf: Update reg_bound range refinement logic bpf: Improve bounds when s64 crosses sign boundary bpf: Simplify bounds refinement from s32 selftests/bpf: Enable private stack tests for arm64 bpf, arm64: JIT support for private stack bpf: Move bpf_jit_get_prog_name() to core.c bpf, arm64: Fix fp initialization for exception boundary umd: Remove usermode driver framework bpf/preload: Don't select USERMODE_DRIVER selftests/bpf: Fix test dynptr/test_dynptr_memset_xdp_chunks failure selftests/bpf: Fix test dynptr/test_dynptr_copy_xdp failure selftests/bpf: Increase xdp data size for arm64 64K page size ... |
||
|
Linus Torvalds
|
8be4d31cb8 |
Networking changes for 6.17.
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmiFgLgACgkQMUZtbf5S
IrvafxAAnQRwYBoIG+piCILx6z5pRvBGHkmEQ4AQgSCFuq2eO3ubwMFIqEybfma1
5+QFjUZAV3OgGgKRBS2KGWxtSzdiF+/JGV1VOIN67sX3Mm0a2QgjA4n5CgKL0FPr
o6BEzjX5XwG1zvGcBNQ5BZ19xUUKjoZQgTtnea8sZ57Fsp5RtRgmYRqoewNvNk/n
uImh0NFsDVb0UeOpSzC34VD9l1dJvLGdui4zJAjno/vpvmT1DkXjoK419J/r52SS
X+5WgsfJ6DkjHqVN1tIhhK34yWqBOcwGFZJgEnWHMkFIl2FqRfFKMHyqtfLlVnLA
mnIpSyz8Sq2AHtx0TlgZ3At/Ri8p5+yYJgHOXcDKyABa8y8Zf4wrycmr6cV9JLuL
z54nLEVnJuvfDVDVJjsLYdJXyhMpZFq6+uAItdxKaw8Ugp/QqG4QtoRj+XIHz4ZW
z6OohkCiCzTwEISFK+pSTxPS30eOxq43kCspcvuLiwCCStJBRkRb5GdZA4dm7LA+
1Od4ADAkHjyrFtBqTyyC2scX8UJ33DlAIpAYyIeS6w9Cj9EXxtp1z33IAAAZ03MW
jJwIaJuc8bK2fWKMmiG7ucIXjPo4t//KiWlpkwwqLhPbjZgfDAcxq1AC2TLoqHBL
y4EOgKpHDCMAghSyiFIAn2JprGcEt8dp+11B0JRXIn4Pm/eYDH8=
=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
||
|
Linus Torvalds
|
4b290aae78 |
Summary
* Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective subsystems. Only 5
(out of the original 50) will remain in kernel/sysctl.c file; these handle
either sysctl or common arch variables.
By decentralizing sysctl registrations, subsystem maintainers regain control
over their sysctl interfaces, improving maintainability and reducing the
likelihood of merge conflicts.
* docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented in the
check-sysctl-docs script. This script can now be used to automatically
identify if documentation is missing.
* Testing
All these have been in linux-next since rc3, giving them a solid 3 to 4 weeks
worth of testing. Additionally, sysctl selftests and kunit were also run
locally on my x86_64
-----BEGIN PGP SIGNATURE-----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=R369
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move sysctls out of the kern_table array
This is the final move of ctl_tables into their respective
subsystems. Only 5 (out of the original 50) will remain in
kernel/sysctl.c file; these handle either sysctl or common arch
variables.
By decentralizing sysctl registrations, subsystem maintainers regain
control over their sysctl interfaces, improving maintainability and
reducing the likelihood of merge conflicts.
- docs: Remove false positives from check-sysctl-docs
Stopped falsely identifying sysctls as undocumented or unimplemented
in the check-sysctl-docs script. This script can now be used to
automatically identify if documentation is missing.
* tag 'sysctl-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (23 commits)
docs: Downgrade arm64 & riscv from titles to comment
docs: Replace spaces with tabs in check-sysctl-docs
docs: Remove colon from ctltable title in vm.rst
docs: Add awk section for ucount sysctl entries
docs: Use skiplist when checking sysctl admin-guide
docs: nixify check-sysctl-docs
sysctl: rename kern_table -> sysctl_subsys_table
kernel/sys.c: Move overflow{uid,gid} sysctl into kernel/sys.c
uevent: mv uevent_helper into kobject_uevent.c
sysctl: Removed unused variable
sysctl: Nixify sysctl.sh
sysctl: Remove superfluous includes from kernel/sysctl.c
sysctl: Remove (very) old file changelog
sysctl: Move sysctl_panic_on_stackoverflow to kernel/panic.c
sysctl: move cad_pid into kernel/pid.c
sysctl: Move tainted ctl_table into kernel/panic.c
Input: sysrq: mv sysrq into drivers/tty/sysrq.c
fork: mv threads-max into kernel/fork.c
parisc/power: Move soft-power into power.c
mm: move randomize_va_space into memory.c
...
|
||
|
Linus Torvalds
|
6fb44438a5 |
arm64 updates for 6.17:
Perf and PMU updates:
- Add support for new (v3) Hisilicon SLLC and DDRC PMUs
- Add support for Arm-NI PMU integrations that share interrupts between
clock domains within a given instance
- Allow SPE to be configured with a lower sample period than the
minimum recommendation advertised by PMSIDR_EL1.Interval
- Add suppport for Arm's "Branch Record Buffer Extension" (BRBE)
- Adjust the perf watchdog period according to cpu frequency changes
- Minor driver fixes and cleanups
Hardware features:
- Support for MTE store-only checking (FEAT_MTE_STORE_ONLY)
- Support for reporting the non-address bits during a synchronous MTE
tag check fault (FEAT_MTE_TAGGED_FAR)
- Optimise the TLBI when folding/unfolding contiguous PTEs on hardware
with FEAT_BBM (break-before-make) level 2 and no TLB conflict aborts
Software features:
- Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable()
and using the text-poke API for late module relocations
- Force VMAP_STACK always on and change arm64_efi_rt_init() to use
arch_alloc_vmap_stack() in order to avoid KASAN false positives
ACPI:
- Improve SPCR handling and messaging on systems lacking an SPCR table
Debug:
- Simplify the debug exception entry path
- Drop redundant DBG_MDSCR_* macros
Kselftests:
- Cleanups and improvements for SME, SVE and FPSIMD tests
Miscellaneous:
- Optimise loop to reduce redundant operations in contpte_ptep_get()
- Remove ISB when resetting POR_EL0 during signal handling
- Mark the kernel as tainted on SEA and SError panic
- Remove redundant gcs_free() call
-----BEGIN PGP SIGNATURE-----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=5h1C
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"A quick summary: perf support for Branch Record Buffer Extensions
(BRBE), typical PMU hardware updates, small additions to MTE for
store-only tag checking and exposing non-address bits to signal
handlers, HAVE_LIVEPATCH enabled on arm64, VMAP_STACK forced on.
There is also a TLBI optimisation on hardware that does not require
break-before-make when changing the user PTEs between contiguous and
non-contiguous.
More details:
Perf and PMU updates:
- Add support for new (v3) Hisilicon SLLC and DDRC PMUs
- Add support for Arm-NI PMU integrations that share interrupts
between clock domains within a given instance
- Allow SPE to be configured with a lower sample period than the
minimum recommendation advertised by PMSIDR_EL1.Interval
- Add suppport for Arm's "Branch Record Buffer Extension" (BRBE)
- Adjust the perf watchdog period according to cpu frequency changes
- Minor driver fixes and cleanups
Hardware features:
- Support for MTE store-only checking (FEAT_MTE_STORE_ONLY)
- Support for reporting the non-address bits during a synchronous MTE
tag check fault (FEAT_MTE_TAGGED_FAR)
- Optimise the TLBI when folding/unfolding contiguous PTEs on
hardware with FEAT_BBM (break-before-make) level 2 and no TLB
conflict aborts
Software features:
- Enable HAVE_LIVEPATCH after implementing arch_stack_walk_reliable()
and using the text-poke API for late module relocations
- Force VMAP_STACK always on and change arm64_efi_rt_init() to use
arch_alloc_vmap_stack() in order to avoid KASAN false positives
ACPI:
- Improve SPCR handling and messaging on systems lacking an SPCR
table
Debug:
- Simplify the debug exception entry path
- Drop redundant DBG_MDSCR_* macros
Kselftests:
- Cleanups and improvements for SME, SVE and FPSIMD tests
Miscellaneous:
- Optimise loop to reduce redundant operations in contpte_ptep_get()
- Remove ISB when resetting POR_EL0 during signal handling
- Mark the kernel as tainted on SEA and SError panic
- Remove redundant gcs_free() call"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64/gcs: task_gcs_el0_enable() should use passed task
arm64: Kconfig: Keep selects somewhat alphabetically ordered
arm64: signal: Remove ISB when resetting POR_EL0
kselftest/arm64: Handle attempts to disable SM on SME only systems
kselftest/arm64: Fix SVE write data generation for SME only systems
kselftest/arm64: Test SME on SME only systems in fp-ptrace
kselftest/arm64: Test FPSIMD format data writes via NT_ARM_SVE in fp-ptrace
kselftest/arm64: Allow sve-ptrace to run on SME only systems
arm64/mm: Drop redundant addr increment in set_huge_pte_at()
kselftest/arm4: Provide local defines for AT_HWCAP3
arm64: Mark kernel as tainted on SAE and SError panic
arm64/gcs: Don't call gcs_free() when releasing task_struct
drivers/perf: hisi: Support PMUs with no interrupt
drivers/perf: hisi: Relax the event number check of v2 PMUs
drivers/perf: hisi: Add support for HiSilicon SLLC v3 PMU driver
drivers/perf: hisi: Use ACPI driver_data to retrieve SLLC PMU information
drivers/perf: hisi: Add support for HiSilicon DDRC v3 PMU driver
drivers/perf: hisi: Simplify the probe process for each DDRC version
perf/arm-ni: Support sharing IRQs within an NI instance
perf/arm-ni: Consolidate CPU affinity handling
...
|
||
|
Linus Torvalds
|
b1c21075d3 |
nolibc changes for v6.17
Highlights: * New supported architectures: SuperH, x32, MIPS n32/n64 * Adopt general kernel architectures names * Integrate the nolibc selftests into the kselftests framework * Various fixes and new syscall wrappers Two non-nolibc changes: * New arm64 selftest which depends on nolibc changes * General tools/ cross-compilation bugfix for s390 clang -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTg4lxklFHAidmUs57B+h1jyw5bOAUCaIKVZQAKCRDB+h1jyw5b OFU7AP9pFk+eIO8M68GHCRVQoOjWTYa/A0lPfx31pa3HTHYiDAD+PLcTEBP4nc21 ZQ4MFxwe+O9YXKX+Y1LkqkU7yOu5eQo= =xQ6f -----END PGP SIGNATURE----- Merge tag 'nolibc-20250724-for-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc Pull nolibc updates from Thomas Weißschuh: "Highlights: - New supported architectures: SuperH, x32, MIPS n32/n64 - Adopt general kernel architectures names - Integrate the nolibc selftests into the kselftests framework - Various fixes and new syscall wrappers Two non-nolibc changes: - New arm64 selftest which depends on nolibc changes - General tools/ cross-compilation bugfix for s390 clang" * tag 'nolibc-20250724-for-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (30 commits) selftests/nolibc: add x32 test configuration tools/nolibc: define time_t in terms of __kernel_old_time_t selftests/nolibc: show failed run if test process crashes tools/nolibc: drop s390 clang target override tools/build: Fix s390(x) cross-compilation with clang tools/nolibc: avoid false-positive -Wmaybe-uninitialized through waitpid() selftests/nolibc: correctly report errors from printf() and friends selftests/nolibc: create /dev/full when running as PID 1 tools/nolibc: add support for clock_nanosleep() and nanosleep() kselftest/arm64: Add a test for vfork() with GCS selftests/nolibc: Add coverage of vfork() tools/nolibc: Provide vfork() tools/nolibc: Replace ifdef with if defined() in sys.h tools/nolibc: add support for SuperH selftests/nolibc: use file driver for QEMU serial selftests/nolibc: fix EXTRACONFIG variables ordering tools/nolibc: MIPS: add support for N64 and N32 ABIs tools/nolibc: MIPS: drop noreorder option tools/nolibc: MIPS: drop manual stack pointer alignment tools/nolibc: MIPS: drop $gp setup ... |
||
|
Linus Torvalds
|
78bb43e51b |
Updates for the generic entry code:
- Split the code into syscall and exception/interrupt parts to ease the
conversion of ARM[64] to the generic entry infrastructure
- Extend syscall user dispatching to support a single intercepted range
instead of the default single non-intercepted range. That allows
monitoring/analysis of a specific executable range, e.g. a library, and
also provides flexibility for sandboxing scenarios.
- Cleanup and extend the user dispatch selftest
-----BEGIN PGP SIGNATURE-----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=yaCQ
-----END PGP SIGNATURE-----
Merge tag 'core-entry-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull generic entry code updates from Thomas Gleixner:
- Split the code into syscall and exception/interrupt parts to ease the
conversion of ARM[64] to the generic entry infrastructure
- Extend syscall user dispatching to support a single intercepted range
instead of the default single non-intercepted range. That allows
monitoring/analysis of a specific executable range, e.g. a library,
and also provides flexibility for sandboxing scenarios
- Cleanup and extend the user dispatch selftest
* tag 'core-entry-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Split generic entry into generic exception and syscall entry
selftests: Add tests for PR_SYS_DISPATCH_INCLUSIVE_ON
syscall_user_dispatch: Add PR_SYS_DISPATCH_INCLUSIVE_ON
selftests: Fix errno checking in syscall_user_dispatch test
|
||
|
Linus Torvalds
|
a0482e3446 |
A set of updates for the VDSO selftests:
- Skip the chaca test when the architecture does not provide the random
infrastructure in the VDSO
- Switch back to a symlink for vdso_standalone_test_x86 to avoid code
duplication.
- Improve code quality and TAP output compliance
-----BEGIN PGP SIGNATURE-----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=IYtA
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO selftest updates from Thomas Gleixner:
- Skip the chacha test when the architecture does not provide the
random infrastructure in the VDSO
- Switch back to a symlink for vdso_standalone_test_x86 to avoid code
duplication.
- Improve code quality and TAP output compliance
* tag 'timers-vdso-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: vDSO: vdso_standalone_test_x86: Replace source file with symlink
selftests: vDSO: vdso_test_getrandom: Always print TAP header
selftests: vDSO: vdso_test_correctness: Fix -Wstrict-prototypes
selftests: vDSO: Enable -Wall
selftests: vDSO: vdso_config: Avoid -Wunused-variables
selftests: vDSO: vdso_test_getrandom: Avoid -Wunused
selftests: vDSO: vdso_test_getrandom: Drop unused include of linux/compiler.h
selftests: vDSO: clock_getres: Drop unused include of err.h
selftests: vDSO: chacha: Correctly skip test if necessary
|
||
|
Linus Torvalds
|
f38b1f243e |
Update for the futex subsystem:
- Switch the reference counting to a RCU based per-CPU reference to
address a performance bottleneck vs. the single instance rcuref
variant.
- Make the futex selftest build on 32-bit architectures which only
support 64-bit time_t, e.g. RISCV-32.
- Cleanups and improvements in selftests and futex bench
-----BEGIN PGP SIGNATURE-----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=WqFq
-----END PGP SIGNATURE-----
Merge tag 'locking-futex-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex updates from Thomas Gleixner:
- Switch the reference counting to a RCU based per-CPU reference to
address a performance bottleneck vs the single instance rcuref
variant
- Make the futex selftest build on 32-bit architectures which only
support 64-bit time_t, e.g. RISCV-32
- Cleanups and improvements in selftests and futex bench
* tag 'locking-futex-2025-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Fix spelling mistake "Succeffuly" -> "Successfully"
selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t
perf bench futex: Remove support for IMMUTABLE
selftests/futex: Remove support for IMMUTABLE
futex: Remove support for IMMUTABLE
futex: Make futex_private_hash_get() static
futex: Use RCU-based per-CPU reference counting instead of rcuref_t
selftests/futex: Adapt the private hash test to RCU related changes
|
||
|
Linus Torvalds
|
0db240bc07 |
linux_kselftest-next-6.17-rc1
Fixes
- false failure of subsystem event test
- glob filter test to use mutex_unlock() instead of mutex_trylock()
- several spelling errors in tests
- test_kexec_jump build errors
- pidfd test duplicate-symbol warnings for SCHED_ CPP symbols
Adds a reliable check for suspend to breakpoints suspend test
Improvements to ipc test
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmiH76IACgkQCwJExA0N
QxyHAw/+PWj6IvX+3qQEhPL1l/huPpknPVqd/UVEozAudtkDMNwTXAzmc8TZAGU1
BiQTMRBothDZVxLa6YyQCNgHcFuE9X4PIDPCeRrtHQmoSIJz5Db7wrgy1LtrStBN
9bOrsoYUFyy5xWlnidreu5IHuZFrLGUdwF4BhlBL9IvNBv2FKujHfzGl0mbc2agH
/pbJuLiDKRWk+Wqgyv8LOBu9wsQSraunyiKxYZ+ICqzhangnH8SBVNejum9B/KUT
P2Jzyjjo9hyZxR85B7951HqubzWZjhrS2I9boDYaI0x8RyOM75pO6cdh681Gdzz9
lluospIzQRsKR1brtP+M5vH7F6yGnrQRvjp/PvW5a410JFYeIiuhCuDhGZzYsPdj
nFFXP/CLlTJ4U1TVAzZ0OpwapoLfSmnUzrmVHFJRDW6YpuhliFbxb4YErCRxmBLX
MLxN7NnPG0fUxO4voy49GiqXfFuYnvgZO1FWJuczKv4NXxPUbc77Y1K9Tv4mV97n
W5e1EO3JDLghUAkoQyDy9oC7g6ZYET1EcqhOeTujazOAVPlIKJ0YOnLqlFppc3F7
oqlXJbRdjamn9w+UcAjWNPQxYAJeK8jyB+S2LkCDLULD3dgJEzBj7szC67Ou3yQB
qKuh9u6xhFKc0xgW2YSm3+Cpj8BPGlKzNf+Ks4TIGF8pvurPCy0=
=DyuD
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- Fixes:
- false failure of subsystem event test
- glob filter test to use mutex_unlock() instead of mutex_trylock()
- several spelling errors in tests
- test_kexec_jump build errors
- pidfd test duplicate-symbol warnings for SCHED_ CPP symbols
- Add a reliable check for suspend to breakpoints suspend test
- Improvements to ipc test
* tag 'linux_kselftest-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/pidfd: Fix duplicate-symbol warnings for SCHED_ CPP symbols
selftests/tracing: Fix false failure of subsystem event test
selftests/kexec: fix test_kexec_jump build
selftests: breakpoints: use suspend_stats to reliably check suspend success
selftests: tracing: Use mutex_unlock for testing glob filter
selftests: print installation complete message
selftests/ptrace: Fix spelling mistake "multible" -> "multiple"
selftests: ipc: Replace fail print statements with ksft_test_result_fail
selftests: Add version file to kselftest installation dir
selftests/cpu-hotplug: fix typo in hotplaggable_offline_cpus function name
|
||
|
Paolo Bonzini
|
314b40b3b6 |
KVM/arm64 changes for 6.17, round #1
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts.
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface.
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on hardware
that previously advertised it unconditionally.
- Map supporting endpoints with cacheable memory attributes on systems
with FEAT_S2FWB and DIC where KVM no longer needs to perform cache
maintenance on the address range.
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest
hypervisor to inject external aborts into an L2 VM and take traps of
masked external aborts to the hypervisor.
- Convert more system register sanitization to the config-driven
implementation.
- Fixes to the visibility of EL2 registers, namely making VGICv3 system
registers accessible through the VGIC device instead of the ONE_REG
vCPU ioctls.
- Various cleanups and minor fixes.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCaIezbRccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFr/eAQDY5NIG5cR6ZcAWnPQLmGWpz2ou
pq4Jhn9E/mGR3n5L1AEAsJpfLLpOsmnLBdwfbjmW59gGsa8k3i5tjWEOJ6yzAwk=
=r+sp
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, round #1
- Host driver for GICv5, the next generation interrupt controller for
arm64, including support for interrupt routing, MSIs, interrupt
translation and wired interrupts.
- Use FEAT_GCIE_LEGACY on GICv5 systems to virtualize GICv3 VMs on
GICv5 hardware, leveraging the legacy VGIC interface.
- Userspace control of the 'nASSGIcap' GICv3 feature, allowing
userspace to disable support for SGIs w/o an active state on hardware
that previously advertised it unconditionally.
- Map supporting endpoints with cacheable memory attributes on systems
with FEAT_S2FWB and DIC where KVM no longer needs to perform cache
maintenance on the address range.
- Nested support for FEAT_RAS and FEAT_DoubleFault2, allowing the guest
hypervisor to inject external aborts into an L2 VM and take traps of
masked external aborts to the hypervisor.
- Convert more system register sanitization to the config-driven
implementation.
- Fixes to the visibility of EL2 registers, namely making VGICv3 system
registers accessible through the VGIC device instead of the ONE_REG
vCPU ioctls.
- Various cleanups and minor fixes.
|
||
|
Steven Rostedt
|
a5e71638dd |
ktest.pl: Add new PATCHCHECK_SKIP option to skip testing individual commits
When testing a series of commits that also includes changes to the Linux tools directory, it is useless to test the changes in tools as they may not affect the kernel itself. Doing tests on the kernel for changes that do not affect the kernel is a waste of time. Add a PATCHCHECK_SKIP that takes a series of shas that will be skipped while doing the individual commit tests. For example, the runtime verification may have a series of commits like: $ git log --abbrev-commit --pretty=oneline fac5493251a6~1..HEAD |
||
|
Paolo Bonzini
|
b4733cd5be |
Merge tag 'kvm-x86-selftests-6.17' of https://github.com/kvm-x86/linux into HEAD
KVM selftests changes for 6.17 - Fix a comment typo. - Verify KVM is loaded when getting any KVM module param so that attempting to run a selftest without kvm.ko loaded results in a SKIP message about KVM not being loaded/enabled, versus some random parameter not existing. - SKIP tests that hit EACCES when attempting to access a file, with a "Root required?" help message. In most cases, the test just needs to be run with elevated permissions. |
||
|
Paolo Bonzini
|
1a14928e2e |
Merge tag 'kvm-x86-misc-6.17' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.17 - Prevert the host's DEBUGCTL.FREEZE_IN_SMM (Intel only) when running the guest. Failure to honor FREEZE_IN_SMM can bleed host state into the guest. - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter (Intel only) to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF. - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model. - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical. - Recalculate all MSR intercepts from the "source" on MSR filter changes, and drop the dedicated "shadow" bitmaps (and their awful "max" size defines). - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR. - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently. - Fix a user-triggerable WARN that syzkaller found by stuffing INIT_RECEIVED, a.k.a. WFS, and then putting the vCPU into VMX Root Mode (post-VMXON). Use the same approach KVM uses for dealing with "impossible" emulation when running a !URG guest, and simply wait until KVM_RUN to detect that the vCPU has architecturally impossible state. - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can "virtualize" APERF/MPERF (with many caveats). - Reject KVM_SET_TSC_KHZ if vCPUs have been created, as changing the "default" frequency is unsupported for VMs with a "secure" TSC, and there's no known use case for changing the default frequency for other VM types. |
||
|
Paolo Bonzini
|
f02b1bcc73 |
Merge tag 'kvm-x86-irqs-6.17' of https://github.com/kvm-x86/linux into HEAD
KVM IRQ changes for 6.17 - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI. - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand. - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time. - Drop x86's irq_comm.c, and move a pile of IRQ related code into irq.c. - Fix a variety of flaws and bugs in the AVIC device posted IRQ code. - Inhibited AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation. - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry. - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs. - Dedup x86's device posted IRQ code, as the vast majority of functionality can be shared verbatime between SVM and VMX. - Harden the device posted IRQ code against bugs and runtime errors. - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n). - Generate GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU. - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs. - Clean up and document/comment the irqfd assignment code. - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique. |
||
|
KaFai Wan
|
51d3750aba |
selftests/bpf: Migrate fexit_noreturns case into tracing_failure test suite
Delete fexit_noreturns.c files and migrate the cases into tracing_failure.c files. The result: $ tools/testing/selftests/bpf/test_progs -t tracing_failure/fexit_noreturns #467/4 tracing_failure/fexit_noreturns:OK #467 tracing_failure:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: KaFai Wan <kafai.wan@linux.dev> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250724151454.499040-5-kafai.wan@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
KaFai Wan
|
a32f6f17a7 |
selftests/bpf: Add selftest for attaching tracing programs to functions in deny list
The result: $ tools/testing/selftests/bpf/test_progs -t tracing_failure/tracing_deny #468/3 tracing_failure/tracing_deny:OK #468 tracing_failure:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: KaFai Wan <kafai.wan@linux.dev> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250724151454.499040-4-kafai.wan@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
KaFai Wan
|
a5a6b29a70 |
bpf: Show precise rejected function when attaching fexit/fmod_ret to __noreturn functions
With this change, we know the precise rejected function name when attaching fexit/fmod_ret to __noreturn functions from log. $ ./fexit libbpf: prog 'fexit': BPF program load failed: -EINVAL libbpf: prog 'fexit': -- BEGIN PROG LOAD LOG -- Attaching fexit/fmod_ret to __noreturn function 'do_exit' is rejected. Suggested-by: Leon Hwang <leon.hwang@linux.dev> Signed-off-by: KaFai Wan <kafai.wan@linux.dev> Acked-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250724151454.499040-2-kafai.wan@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
ae388edd4a |
Landlock update for v6.17-rc1
-----BEGIN PGP SIGNATURE----- iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCaINQ2hAcbWljQGRpZ2lr b2QubmV0AAoJEOXj0OiMgvbS8DcA/RvnXD7NcvINU94pkY6w+SxtdhsIe/w7EcGF LJdwxrKQAP0WpMNTfKdzfe6ub7qE+AkZYhagKAuMCloS1qE35nZgDg== =WKRS -----END PGP SIGNATURE----- Merge tag 'landlock-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock update from Mickaël Salaün: "Fix test issues, improve build compatibility, and add new tests" * tag 'landlock-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: landlock: Fix cosmetic change samples/landlock: Fix building on musl libc landlock: Fix warning from KUnit tests selftests/landlock: Add test to check rule tied to covered mount point selftests/landlock: Fix build of audit_test selftests/landlock: Fix readlink check |
||
|
Linus Torvalds
|
13150742b0 |
Crypto library updates for 6.17
This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants. These APIs will allow further simplifications across the
kernel as users start using them instead of the old-school crypto API.
(I've already written a lot of such conversion patches, removing over
1000 more lines of code. But most of those will target 6.18 or later.)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaIZ93BQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK8HCAQD3O9P0qd6wscne5XuRwaybzKHQ2AqU
OlhlDZWQQEvYAgD/aa6KP/DS+8RKGj0TBn6bACAJyXyDygFXq5a5s9pGzAs=
=UmMM
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
|
||
|
Linus Torvalds
|
8e736a2eea |
hardening updates for v6.17-rc1
- Introduce and start using TRAILING_OVERLAP() helper for fixing embedded flex array instances (Gustavo A. R. Silva) - mux: Convert mux_control_ops to a flex array member in mux_chip (Thorsten Blum) - string: Group str_has_prefix() and strstarts() (Andy Shevchenko) - Remove KCOV instrumentation from __init and __head (Ritesh Harjani, Kees Cook) - Refactor and rename stackleak feature to support Clang - Add KUnit test for seq_buf API - Fix KUnit fortify test under LTO -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaIfUkgAKCRA2KwveOeQk uypLAP92r6f47sWcOw/5B9aVffX6Bypsb7dqBJQpCNxI5U1xcAEAiCrZ98UJyOeQ JQgnXd4N67K4EsS2JDc+FutRn3Yi+A8= =+5Bq -----END PGP SIGNATURE----- Merge tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: - Introduce and start using TRAILING_OVERLAP() helper for fixing embedded flex array instances (Gustavo A. R. Silva) - mux: Convert mux_control_ops to a flex array member in mux_chip (Thorsten Blum) - string: Group str_has_prefix() and strstarts() (Andy Shevchenko) - Remove KCOV instrumentation from __init and __head (Ritesh Harjani, Kees Cook) - Refactor and rename stackleak feature to support Clang - Add KUnit test for seq_buf API - Fix KUnit fortify test under LTO * tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits) sched/task_stack: Add missing const qualifier to end_of_stack() kstack_erase: Support Clang stack depth tracking kstack_erase: Add -mgeneral-regs-only to silence Clang warnings init.h: Disable sanitizer coverage for __init and __head kstack_erase: Disable kstack_erase for all of arm compressed boot code x86: Handle KCOV __init vs inline mismatches arm64: Handle KCOV __init vs inline mismatches s390: Handle KCOV __init vs inline mismatches arm: Handle KCOV __init vs inline mismatches mips: Handle KCOV __init vs inline mismatch powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON configs/hardening: Enable CONFIG_KSTACK_ERASE stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth stackleak: Rename STACKLEAK to KSTACK_ERASE seq_buf: Introduce KUnit tests string: Group str_has_prefix() and strstarts() kunit/fortify: Add back "volatile" for sizeof() constants acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings ... |
||
|
Linus Torvalds
|
6e11664f14 |
for-6.17/block-20250728
-----BEGIN PGP SIGNATURE-----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=e86T
-----END PGP SIGNATURE-----
Merge tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
|
||
|
Linus Torvalds
|
7e7bc8335b |
vfs-6.17-rc1.bpf
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCjwAKCRCRxhvAZXjc osnVAQCv4rM7sF4yJvGlm1myIJcJy5Sabk2q31qMdI1VHmkcOwD+Mxs7d1aByTS8 /6djhVleq6lcT2LpP9j8YI3Rb+x30QY= =PF3o -----END PGP SIGNATURE----- Merge tag 'vfs-6.17-rc1.bpf' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs bpf updates from Christian Brauner: "These changes allow bpf to read extended attributes from cgroupfs. This is useful in redirecting AF_UNIX socket connections based on cgroup membership of the socket. One use-case is the ability to implement log namespaces in systemd so services and containers are redirected to different journals" * tag 'vfs-6.17-rc1.bpf' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: selftests/kernfs: test xattr retrieval selftests/bpf: Add tests for bpf_cgroup_read_xattr bpf: Mark cgroup_subsys_state->cgroup RCU safe bpf: Introduce bpf_cgroup_read_xattr to read xattr of cgroup's node kernfs: remove iattr_mutex |
||
|
Linus Torvalds
|
672dcda246 |
vfs-6.17-rc1.pidfs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCiQAKCRCRxhvAZXjc
orltAQDq3y1anYETz5/FD6P2gXY1W5hXdSm3EHHeacQ1JjTXvgEA2g1lWO7J4anf
oOVE8aSvMow/FOjivLZBYmI65pkYJAE=
=oDKB
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfs updates from Christian Brauner:
- persistent info
Persist exit and coredump information independent of whether anyone
currently holds a pidfd for the struct pid.
The current scheme allocated pidfs dentries on-demand repeatedly.
This scheme is reaching it's limits as it makes it impossible to pin
information that needs to be available after the task has exited or
coredumped and that should not be lost simply because the pidfd got
closed temporarily. The next opener should still see the stashed
information.
This is also a prerequisite for supporting extended attributes on
pidfds to allow attaching meta information to them.
If someone opens a pidfd for a struct pid a pidfs dentry is allocated
and stashed in pid->stashed. Once the last pidfd for the struct pid
is closed the pidfs dentry is released and removed from pid->stashed.
So if 10 callers create a pidfs dentry for the same struct pid
sequentially, i.e., each closing the pidfd before the other creates a
new one then a new pidfs dentry is allocated every time.
Because multiple tasks acquiring and releasing a pidfd for the same
struct pid can race with each another a task may still find a valid
pidfs entry from the previous task in pid->stashed and reuse it. Or
it might find a dead dentry in there and fail to reuse it and so
stashes a new pidfs dentry. Multiple tasks may race to stash a new
pidfs dentry but only one will succeed, the other ones will put their
dentry.
The current scheme aims to ensure that a pidfs dentry for a struct
pid can only be created if the task is still alive or if a pidfs
dentry already existed before the task was reaped and so exit
information has been was stashed in the pidfs inode.
That's great except that it's buggy. If a pidfs dentry is stashed in
pid->stashed after pidfs_exit() but before __unhash_process() is
called we will return a pidfd for a reaped task without exit
information being available.
The pidfds_pid_valid() check does not guard against this race as it
doens't sync at all with pidfs_exit(). The pid_has_task() check might
be successful simply because we're before __unhash_process() but
after pidfs_exit().
Introduce a new scheme where the lifetime of information associated
with a pidfs entry (coredump and exit information) isn't bound to the
lifetime of the pidfs inode but the struct pid itself.
The first time a pidfs dentry is allocated for a struct pid a struct
pidfs_attr will be allocated which will be used to store exit and
coredump information.
If all pidfs for the pidfs dentry are closed the dentry and inode can
be cleaned up but the struct pidfs_attr will stick until the struct
pid itself is freed. This will ensure minimal memory usage while
persisting relevant information.
The new scheme has various advantages. First, it allows to close the
race where we end up handing out a pidfd for a reaped task for which
no exit information is available. Second, it minimizes memory usage.
Third, it allows to remove complex lifetime tracking via dentries
when registering a struct pid with pidfs. There's no need to get or
put a reference. Instead, the lifetime of exit and coredump
information associated with a struct pid is bound to the lifetime of
struct pid itself.
- extended attributes
Now that we have a way to persist information for pidfs dentries we
can start supporting extended attributes on pidfds. This will allow
userspace to attach meta information to tasks.
One natural extension would be to introduce a custom pidfs.* extended
attribute space and allow for the inheritance of extended attributes
across fork() and exec().
The first simple scheme will allow privileged userspace to set
trusted extended attributes on pidfs inodes.
- Allow autonomous pidfs file handles
Various filesystems such as pidfs and drm support opening file
handles without having to require a file descriptor to identify the
filesystem. The filesystem are global single instances and can be
trivially identified solely on the information encoded in the file
handle.
This makes it possible to not have to keep or acquire a sentinal file
descriptor just to pass it to open_by_handle_at() to identify the
filesystem. That's especially useful when such sentinel file
descriptor cannot or should not be acquired.
For pidfs this means a file handle can function as full replacement
for storing a pid in a file. Instead a file handle can be stored and
reopened purely based on the file handle.
Such autonomous file handles can be opened with or without specifying
a a file descriptor. If no proper file descriptor is used the
FD_PIDFS_ROOT sentinel must be passed. This allows us to define
further special negative fd sentinels in the future.
Userspace can trivially test for support by trying to open the file
handle with an invalid file descriptor.
- Allow pidfds for reaped tasks with SCM_PIDFD messages
This is a logical continuation of the earlier work to create pidfds
for reaped tasks through the SO_PEERPIDFD socket option merged in
|
||
|
Linus Torvalds
|
7031769e10 |
vfs-6.17-rc1.mmap_prepare
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCgQAKCRCRxhvAZXjc os+nAP9LFHUwWO6EBzHJJGEVjJvvzsbzqeYrRFamYiMc5ulPJwD+KW4RIgJa/MWO pcYE40CacaekD8rFWwYUyszpgmv6ewc= =wCwp -----END PGP SIGNATURE----- Merge tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull mmap_prepare updates from Christian Brauner: "Last cycle we introduce f_op->mmap_prepare() in |
||
|
Linus Torvalds
|
117eab5c6e |
vfs-6.17-rc1.coredump
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINAYAAKCRCRxhvAZXjc
opJiAQDXGs+gQcxJ+4BpV4QszT2OJC19oI/f5AQ4PWMJdHgr4AEA7fc6NbBrpmW7
L/tbdAwIiWp8bL1Q8Wy7Q2qldHtcggM=
=KbD9
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull coredump updates from Christian Brauner:
"This contains an extension to the coredump socket and a proper rework
of the coredump code.
- This extends the coredump socket to allow the coredump server to
tell the kernel how to process individual coredumps. This allows
for fine-grained coredump management. Userspace can decide to just
let the kernel write out the coredump, or generate the coredump
itself, or just reject it.
* COREDUMP_KERNEL
The kernel will write the coredump data to the socket.
* COREDUMP_USERSPACE
The kernel will not write coredump data but will indicate to the
parent that a coredump has been generated. This is used when
userspace generates its own coredumps.
* COREDUMP_REJECT
The kernel will skip generating a coredump for this task.
* COREDUMP_WAIT
The kernel will prevent the task from exiting until the coredump
server has shutdown the socket connection.
The flexible coredump socket can be enabled by using the "@@"
prefix instead of the single "@" prefix for the regular coredump
socket:
@@/run/systemd/coredump.socket
- Cleanup the coredump code properly while we have to touch it
anyway.
Split out each coredump mode in a separate helper so it's easy to
grasp what is going on and make the code easier to follow. The core
coredump function should now be very trivial to follow"
* tag 'vfs-6.17-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (31 commits)
cleanup: add a scoped version of CLASS()
coredump: add coredump_skip() helper
coredump: avoid pointless variable
coredump: order auto cleanup variables at the top
coredump: add coredump_cleanup()
coredump: auto cleanup prepare_creds()
cred: add auto cleanup method
coredump: directly return
coredump: auto cleanup argv
coredump: add coredump_write()
coredump: use a single helper for the socket
coredump: move pipe specific file check into coredump_pipe()
coredump: split pipe coredumping into coredump_pipe()
coredump: move core_pipe_count to global variable
coredump: prepare to simplify exit paths
coredump: split file coredumping into coredump_file()
coredump: rename do_coredump() to vfs_coredump()
selftests/coredump: make sure invalid paths are rejected
coredump: validate socket path in coredump_parse()
coredump: don't allow ".." in coredump socket path
...
|
||
|
Paul Chaignon
|
5dbb19b16a |
bpf: Add third round of bounds deduction
Commit
|
||
|
Paul Chaignon
|
f96841bbf4 |
selftests/bpf: Test invariants on JSLT crossing sign
The improvement of the u64/s64 range refinement fixed the invariant violation that was happening on this test for BPF_JSLT when crossing the sign boundary. After this patch, we have one test remaining with a known invariant violation. It's the same test as fixed here but for 32 bits ranges. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Link: https://lore.kernel.org/r/ad046fb0016428f1a33c3b81617aabf31b51183f.1753695655.git.paul.chaignon@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Paul Chaignon
|
26e5e346a5 |
selftests/bpf: Test cross-sign 64bits range refinement
This patch adds coverage for the new cross-sign 64bits range refinement
logic. The three tests cover the cases when the u64 and s64 ranges
overlap (1) in the negative portion of s64, (2) in the positive portion
of s64, and (3) in both portions.
The first test is a simplified version of a BPF program generated by
syzkaller that caused an invariant violation [1]. It looks like
syzkaller could not extract the reproducer itself (and therefore didn't
report it to the mailing list), but I was able to extract it from the
console logs of a crash.
The principle is similar to the invariant violation described in
commit
|
||
|
Paul Chaignon
|
da653de268 |
selftests/bpf: Update reg_bound range refinement logic
This patch updates the range refinement logic in the reg_bound test to match the new logic from the previous commit. Without this change, tests would fail because we end with more precise ranges than the tests expect. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com> Link: https://lore.kernel.org/r/b7f6b1fbe03373cca4e1bb6a113035a6cd2b3ff7.1753695655.git.paul.chaignon@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Oliver Upton
|
18ec25dd0e |
KVM: arm64: selftests: Add FEAT_RAS EL2 registers to get-reg-list
VDISR_EL2 and VSESR_EL2 are now visible to userspace for nested VMs. Add them to get-reg-list. Link: https://lore.kernel.org/r/20250728152603.2823699-1-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Oliver Upton
|
0d46e324c0 |
Merge branch 'kvm-arm64/vgic-v4-ctl' into kvmarm/next
* kvm-arm64/vgic-v4-ctl: : Userspace control of nASSGIcap, courtesy of Raghavendra Rao Ananta : : Allow userspace to decide if support for SGIs without an active state is : advertised to the guest, allowing VMs from GICv3-only hardware to be : migrated to to GICv4.1 capable machines. Documentation: KVM: arm64: Describe VGICv3 registers writable pre-init KVM: arm64: selftests: Add test for nASSGIcap attribute KVM: arm64: vgic-v3: Allow userspace to write GICD_TYPER2.nASSGIcap KVM: arm64: vgic-v3: Allow access to GICD_IIDR prior to initialization KVM: arm64: vgic-v3: Consolidate MAINT_IRQ handling KVM: arm64: Disambiguate support for vSGIs v. vLPIs Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Oliver Upton
|
a7f49a9bf4 |
Merge branch 'kvm-arm64/el2-reg-visibility' into kvmarm/next
* kvm-arm64/el2-reg-visibility:
: Fixes to EL2 register visibility, courtesy of Marc Zyngier
:
: - Expose EL2 VGICv3 registers via the VGIC attributes accessor, not the
: KVM_{GET,SET}_ONE_REG ioctls
:
: - Condition visibility of FGT registers on the presence of FEAT_FGT in
: the VM
KVM: arm64: selftest: vgic-v3: Add basic GICv3 sysreg userspace access test
KVM: arm64: Enforce the sorting of the GICv3 system register table
KVM: arm64: Clarify the check for reset callback in check_sysreg_table()
KVM: arm64: vgic-v3: Fix ordering of ICH_HCR_EL2
KVM: arm64: Document registers exposed via KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS
KVM: arm64: selftests: get-reg-list: Add base EL2 registers
KVM: arm64: selftests: get-reg-list: Simplify feature dependency
KVM: arm64: Advertise FGT2 registers to userspace
KVM: arm64: Condition FGT registers on feature availability
KVM: arm64: Expose GICv3 EL2 registers via KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS
KVM: arm64: Let GICv3 save/restore honor visibility attribute
KVM: arm64: Define helper for ICH_VTR_EL2
KVM: arm64: Define constant value for ICC_SRE_EL2
KVM: arm64: Don't advertise ICH_*_EL2 registers through GET_ONE_REG
KVM: arm64: Make RVBAR_EL2 accesses UNDEF
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
||
|
Puranjay Mohan
|
cf2a6de32c |
powerpc64/bpf: Add jit support for load_acquire and store_release
Add JIT support for the load_acquire and store_release instructions. The
implementation is similar to the kernel where:
load_acquire => plain load -> lwsync
store_release => lwsync -> plain store
To test the correctness of the implementation, following selftests were
run:
[fedora@linux-kernel bpf]$ sudo ./test_progs -a \
verifier_load_acquire,verifier_store_release,atomics
#11/1 atomics/add:OK
#11/2 atomics/sub:OK
#11/3 atomics/and:OK
#11/4 atomics/or:OK
#11/5 atomics/xor:OK
#11/6 atomics/cmpxchg:OK
#11/7 atomics/xchg:OK
#11 atomics:OK
#519/1 verifier_load_acquire/load-acquire, 8-bit:OK
#519/2 verifier_load_acquire/load-acquire, 8-bit @unpriv:OK
#519/3 verifier_load_acquire/load-acquire, 16-bit:OK
#519/4 verifier_load_acquire/load-acquire, 16-bit @unpriv:OK
#519/5 verifier_load_acquire/load-acquire, 32-bit:OK
#519/6 verifier_load_acquire/load-acquire, 32-bit @unpriv:OK
#519/7 verifier_load_acquire/load-acquire, 64-bit:OK
#519/8 verifier_load_acquire/load-acquire, 64-bit @unpriv:OK
#519/9 verifier_load_acquire/load-acquire with uninitialized
src_reg:OK
#519/10 verifier_load_acquire/load-acquire with uninitialized src_reg
@unpriv:OK
#519/11 verifier_load_acquire/load-acquire with non-pointer src_reg:OK
#519/12 verifier_load_acquire/load-acquire with non-pointer src_reg
@unpriv:OK
#519/13 verifier_load_acquire/misaligned load-acquire:OK
#519/14 verifier_load_acquire/misaligned load-acquire @unpriv:OK
#519/15 verifier_load_acquire/load-acquire from ctx pointer:OK
#519/16 verifier_load_acquire/load-acquire from ctx pointer @unpriv:OK
#519/17 verifier_load_acquire/load-acquire with invalid register R15:OK
#519/18 verifier_load_acquire/load-acquire with invalid register R15
@unpriv:OK
#519/19 verifier_load_acquire/load-acquire from pkt pointer:OK
#519/20 verifier_load_acquire/load-acquire from flow_keys pointer:OK
#519/21 verifier_load_acquire/load-acquire from sock pointer:OK
#519 verifier_load_acquire:OK
#556/1 verifier_store_release/store-release, 8-bit:OK
#556/2 verifier_store_release/store-release, 8-bit @unpriv:OK
#556/3 verifier_store_release/store-release, 16-bit:OK
#556/4 verifier_store_release/store-release, 16-bit @unpriv:OK
#556/5 verifier_store_release/store-release, 32-bit:OK
#556/6 verifier_store_release/store-release, 32-bit @unpriv:OK
#556/7 verifier_store_release/store-release, 64-bit:OK
#556/8 verifier_store_release/store-release, 64-bit @unpriv:OK
#556/9 verifier_store_release/store-release with uninitialized
src_reg:OK
#556/10 verifier_store_release/store-release with uninitialized src_reg
@unpriv:OK
#556/11 verifier_store_release/store-release with uninitialized
dst_reg:OK
#556/12 verifier_store_release/store-release with uninitialized dst_reg
@unpriv:OK
#556/13 verifier_store_release/store-release with non-pointer
dst_reg:OK
#556/14 verifier_store_release/store-release with non-pointer dst_reg
@unpriv:OK
#556/15 verifier_store_release/misaligned store-release:OK
#556/16 verifier_store_release/misaligned store-release @unpriv:OK
#556/17 verifier_store_release/store-release to ctx pointer:OK
#556/18 verifier_store_release/store-release to ctx pointer @unpriv:OK
#556/19 verifier_store_release/store-release, leak pointer to stack:OK
#556/20 verifier_store_release/store-release, leak pointer to stack
@unpriv:OK
#556/21 verifier_store_release/store-release, leak pointer to map:OK
#556/22 verifier_store_release/store-release, leak pointer to map
@unpriv:OK
#556/23 verifier_store_release/store-release with invalid register
R15:OK
#556/24 verifier_store_release/store-release with invalid register R15
@unpriv:OK
#556/25 verifier_store_release/store-release to pkt pointer:OK
#556/26 verifier_store_release/store-release to flow_keys pointer:OK
#556/27 verifier_store_release/store-release to sock pointer:OK
#556 verifier_store_release:OK
Summary: 3/55 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250717202935.29018-2-puranjay@kernel.org
|
||
|
Enze Li
|
511914506d |
selftests/damon: introduce _common.sh to host shared function
The current test scripts contain duplicated root permission checks in multiple locations. This patch consolidates these checks into _common.sh to eliminate code redundancy. Link: https://lkml.kernel.org/r/20250718064217.299300-1-lienze@kylinos.cn Signed-off-by: Enze Li <lienze@kylinos.cn> Reviewed-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
da5973a0b8 |
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
sysfs.py is testing if non-default additional parameters can be committed. Add a test case for further reducing the parameters to the default set. Link: https://lkml.kernel.org/r/20250720171652.92309-23-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
62b7b1ffa2 |
selftests/damon/sysfs.py: test non-default parameters runtime commit
sysfs.py is testing only the default and minimum DAMON parameters. Add another test case for more non-default additional DAMON parameters commitment on runtime. Link: https://lkml.kernel.org/r/20250720171652.92309-22-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
16797a55aa |
selftests/damon/sysfs.py: generalize DAMON context commit assertion
DAMON context commitment assertion is hard-coded for a specific test case. Split it out into a general version that can be reused for different test cases. Link: https://lkml.kernel.org/r/20250720171652.92309-21-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
a4027b5f24 |
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
DAMON monitoring attributes commitment assertion is hard-coded for a specific test case. Split it out into a general version that can be reused for different test cases. Link: https://lkml.kernel.org/r/20250720171652.92309-20-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
771d7754ab |
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
DAMOS schemes commitment assertion is hard-coded for a specific test case. Split it out into a general version that can be reused for different test cases. Link: https://lkml.kernel.org/r/20250720171652.92309-19-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
53f800581f |
selftests/damon/sysfs.py: test DAMOS filters commitment
Current DAMOS scheme commitment assertion is not testing DAMOS filters. Add the test. Link: https://lkml.kernel.org/r/20250720171652.92309-18-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
f22ff7b5a5 |
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
DAMOS scheme commitment assertion is hard-coded for a specific test case. Split it out into a general version that can be reused for different test cases. Link: https://lkml.kernel.org/r/20250720171652.92309-17-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
bd0487a774 |
selftests/damon/sysfs.py: test DAMOS destinations commitment
Current DAMOS commitment assertion is not testing quota destinations commitment. Add the test. Link: https://lkml.kernel.org/r/20250720171652.92309-16-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
84dc442bd5 |
selftests/damon/sysfs.py: test quota goal commitment
Current DAMOS quota commitment assertion is not testing quota goal commitment. Add the test. Link: https://lkml.kernel.org/r/20250720171652.92309-15-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
f797e709f7 |
selftests/damon/sysfs.py: generalize DamosQuota commit assertion
DamosQuota commitment assertion is hard-coded for a specific test case. Split it out into a general version that can be reused for different test cases. Link: https://lkml.kernel.org/r/20250720171652.92309-14-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
b50c48de61 |
selftests/damon/sysfs.py: generalize DAMOS Watermarks commit assertion
DamosWatermarks commitment assertion is hard-coded for a specific test case. Split it out into a general version that can be reused for different test cases. Link: https://lkml.kernel.org/r/20250720171652.92309-13-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
a1d52cd030 |
selftests/damon/drgn_dump_damon_status: dump DAMOS filters
drgn_dump_damon_status.py is a script for dumping DAMON internal status in json format. It is being used for seeing if DAMON parameters that are set using _damon_sysfs.py are actually passed to DAMON in the kernel space. It is, however, not dumping full DAMON internal status, and it makes increasing test coverage difficult. Add damos filters dumping for more tests. Link: https://lkml.kernel.org/r/20250720171652.92309-12-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
eb413daaf2 |
selftests/damon/drgn_dump_damon_status: dump ctx->ops.id
drgn_dump_damon_status.py is a script for dumping DAMON internal status in json format. It is being used for seeing if DAMON parameters that are set using _damon_sysfs.py are actually passed to DAMON in the kernel space. It is, however, not dumping full DAMON internal status, and it makes increasing test coverage difficult. Add ctx->ops.id dumping for more tests. Link: https://lkml.kernel.org/r/20250720171652.92309-11-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
c1a6958957 |
selftests/damon/drgn_dump_damon_status: dump damos->migrate_dests
drgn_dump_damon_status.py is a script for dumping DAMON internal status in json format. It is being used for seeing if DAMON parameters that are set using _damon_sysfs.py are actually passed to DAMON in the kernel space. It is, however, not dumping full DAMON internal status, and it makes increasing test coverage difficult. Add damos->migrate_dests dumping for more tests. Link: https://lkml.kernel.org/r/20250720171652.92309-10-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
80d4e38107 |
selftests/damon/_damon_sysfs: use 2**32 - 1 as max nr_accesses and age
nr_accesses and age are unsigned int. Use the proper max value. Link: https://lkml.kernel.org/r/20250720171652.92309-9-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
86e541f0be |
selftests/damon/_damon_sysfs: support DAMOS target_nid setup
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface control. Add support of DAMOS action destination target_nid setup for more tests. Link: https://lkml.kernel.org/r/20250720171652.92309-8-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
fca6ddf44d |
selftests/damon/_damon_sysfs: support DAMOS action dests setup
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface control. Add support of DAMOS action destinations setup for more tests. Link: https://lkml.kernel.org/r/20250720171652.92309-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
229b0af664 |
selftests/damon/_damon_sysfs: support DAMOS quota goal nid setup
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface control. Add support of DAMOS quota goal nid setup for more tests. Link: https://lkml.kernel.org/r/20250720171652.92309-6-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
ff5aae307b |
selftests/damon/_damon_sysfs: support DAMOS quota weights setup
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface control. Add support of DAMOS quotas prioritization weights setup for more tests. Link: https://lkml.kernel.org/r/20250720171652.92309-5-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
b436dfaad2 |
selftests/damon/_damon_sysfs: support monitoring intervals goal setup
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface control. Add support of the monitoring intervals auto-tune goal setup for more tests. Link: https://lkml.kernel.org/r/20250720171652.92309-4-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
9d93c103ed |
selftests/damon/_damon_sysfs: support DAMOS filters setup
_damon_sysfs.py contains code for test-purpose DAMON sysfs interface control. Add support of DAMOS filters setup for more tests. Link: https://lkml.kernel.org/r/20250720171652.92309-3-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
6da5e2961f |
selftests/damon/_damon_sysfs: support DAMOS watermarks setup
Patch series "selftests/damon/sysfs.py: test all parameters". sysfs.py tests if DAMON sysfs interface is passing the user-requested parameters to DAMON as expected. But only the default (minimum) parameters are being tested. This is partially because _damon_sysfs.py, which is the library for making the parameter requests, is not supporting the entire parameters. The internal DAMON status dump script (drgn_dump_damon_status.py) is also not dumping entire parameters. Extend the test coverage by updating parameters input and status dumping scripts to support all parameters, and writing additional tests using those. This increased test coverage actually found one real bug (https://lore.kernel.org/20250719181932.72944-1-sj@kernel.org). First seven patches (1-7) extend _damon_sysfs.py for all parameters setup. The eight patch (8) fixes _damon_sysfs.py to use correct max nr_acceses and age values for their type. Following three patches (9-11) extend drgn_dump_damon_status.py to dump full DAMON parameters. Following nine patches (12-20) refactor sysfs.py for general testing code reuse, and extend it for full parameters check. Finally, two patches (21 and 22) add test cases in sysfs.py for full parameters testing. This patch (of 22): _damon_sysfs.py contains code for test-purpose DAMON sysfs interface control. Add support of DAMOS watermarks setup for more tests. Link: https://lkml.kernel.org/r/20250720171652.92309-1-sj@kernel.org Link: https://lkml.kernel.org/r/20250720171652.92309-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
cf20cb9ad1 |
selftests/damon/sysfs.py: stop DAMON for dumping failures
Commit |
||
|
Puranjay Mohan
|
e9f545d0d3 |
selftests/bpf: Enable private stack tests for arm64
As arm64 JIT now supports private stack, make sure all relevant tests run on arm64 architecture. Relevant tests: #415/1 struct_ops_private_stack/private_stack:OK #415/2 struct_ops_private_stack/private_stack_fail:OK #415/3 struct_ops_private_stack/private_stack_recur:OK #415 struct_ops_private_stack:OK #549/1 verifier_private_stack/Private stack, single prog:OK #549/2 verifier_private_stack/Private stack, subtree > MAX_BPF_STACK:OK #549/3 verifier_private_stack/No private stack:OK #549/4 verifier_private_stack/Private stack, callback:OK #549/5 verifier_private_stack/Private stack, exception in mainprog:OK #549/6 verifier_private_stack/Private stack, exception in subprog:OK #549/7 verifier_private_stack/Private stack, async callback, not nested:OK #549/8 verifier_private_stack/Private stack, async callback, potential nesting:OK #549 verifier_private_stack:OK Summary: 2/11 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/bpf/20250724120257.7299-4-puranjay@kernel.org |
||
|
Jakub Kicinski
|
38b74b212a |
selftests: bpf: fix legacy netfilter options
Recent commit to add NETFILTER_XTABLES_LEGACY missed setting
a couple of configs to y. They are still enabled but as modules
which appears to have upset BPF CI, e.g.:
test_bpf_nf_ct:FAIL:iptables-legacy -t raw -A PREROUTING -j CONNMARK --set-mark 42/0 unexpected error: 768 (errno 0)
Fixes:
|
||
|
Jakub Kicinski
|
c58c18be88 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in late fixes to prepare for the 6.17 net-next PR. Conflicts: net/core/neighbour.c |
||
|
Xiumei Mu
|
5b32321fda |
selftests: rtnetlink.sh: remove esp4_offload after test
The esp4_offload module, loaded during IPsec offload tests, should
be reset to its default settings after testing.
Otherwise, leaving it enabled could unintentionally affect subsequence
test cases by keeping offload active.
Without this fix:
$ lsmod | grep offload; ./rtnetlink.sh -t kci_test_ipsec_offload ; lsmod | grep offload;
PASS: ipsec_offload
esp4_offload 12288 0
esp4 32768 1 esp4_offload
With this fix:
$ lsmod | grep offload; ./rtnetlink.sh -t kci_test_ipsec_offload ; lsmod | grep offload;
PASS: ipsec_offload
Fixes:
|
||
|
Raghavendra Rao Ananta
|
15b5964a41 |
KVM: arm64: selftests: Add test for nASSGIcap attribute
Extend vgic_init to test the nASSGIcap attribute, asserting that it is configurable (within reason) prior to initializing the VGIC. Additionally, check that userspace cannot set the attribute after the VGIC has been initialized. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20250724062805.2658919-6-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Marc Zyngier
|
3435bd79ec |
KVM: arm64: selftest: vgic-v3: Add basic GICv3 sysreg userspace access test
We have a lot of more or less useful vgic tests, but none of them tracks the availability of GICv3 system registers, which is a bit annoying. Add one such test, which covers both EL1 and EL2 registers. Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com> Reviewed-by: Sebastian Ott <sebott@redhat.com> Link: https://lore.kernel.org/r/20250718111154.104029-5-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev> |
||
|
Yonghong Song
|
4a5dcb3373 |
selftests/bpf: Fix test dynptr/test_dynptr_memset_xdp_chunks failure
For arm64 64K page size, the xdp data size was set to be more than 64K in one of previous patches. This will cause failure for bpf_dynptr_memset(). Since the failure of bpf_dynptr_memset() is expected with 64K page size, return success. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20250725043440.209266-1-yonghong.song@linux.dev |
||
|
Yonghong Song
|
90f791a975 |
selftests/bpf: Fix test dynptr/test_dynptr_copy_xdp failure
For arm64 64K page size, the bpf_dynptr_copy() in test dynptr/test_dynptr_copy_xdp will succeed, but the test will failure with 4K page size. This patch made a change so the test will fail expectedly for both 4K and 64K page sizes. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Acked-by: Mykyta Yatsenko <yatsenko@meta.com> Link: https://patch.msgid.link/20250725043435.208974-1-yonghong.song@linux.dev |
||
|
Yonghong Song
|
4c82768e41 |
selftests/bpf: Increase xdp data size for arm64 64K page size
With arm64 64K page size, the following 4 subtests failed:
#97/25 dynptr/test_probe_read_user_dynptr:FAIL
#97/26 dynptr/test_probe_read_kernel_dynptr:FAIL
#97/27 dynptr/test_probe_read_user_str_dynptr:FAIL
#97/28 dynptr/test_probe_read_kernel_str_dynptr:FAIL
These failures are due to function bpf_dynptr_check_off_len() in
include/linux/bpf.h where there is a test
if (len > size || offset > size - len)
return -E2BIG;
With 64K page size, the 'offset' is greater than 'size - len',
which caused the test failure.
For 64KB page size, this patch increased the xdp buffer size from 5000 to
90000. The above 4 test failures are fixed as 'size' value is increased.
But it introduced two new failures:
#97/4 dynptr/test_dynptr_copy_xdp:FAIL
#97/12 dynptr/test_dynptr_memset_xdp_chunks:FAIL
These two failures will be addressed in subsequent patches.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://patch.msgid.link/20250725043430.208469-1-yonghong.song@linux.dev
|
||
|
Mohsin Bashir
|
d1f3dbad6f |
selftests: drv-net: Wait for bkg socat to start
Currently, UDP exchange is prone to failure when cmd attempt to send data while socat in bkg is not ready. Since, the behavior is probabilistic, this can result in flakiness for XDP tests. While testing test_xdp_native_tx_mb() on netdevsim, a failure rate of around 1% in 500 500 iterations was observed. Use wait_port_listen() to ensure that the bkg socat is started and ready to receive before cmd start sending. With proposed changes, a re-run of the same test passed 100% of time. Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Link: https://patch.msgid.link/20250724235140.2645885-1-mohsin.bashr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
c6dc26df6b |
netfilter pull request 25-07-25
-----BEGIN PGP SIGNATURE-----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=mKnX
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following series contains Netfilter/IPVS updates for net-next:
1) Display netns inode in conntrack table full log, from lvxiafei.
2) Autoload nf_log_syslog in case no logging backend is available,
from Lance Yang.
3) Three patches to remove unused functions in x_tables, nf_tables and
conntrack. From Yue Haibing.
4) Exclude LEGACY TABLES on PREEMPT_RT: Add NETFILTER_XTABLES_LEGACY
to exclude xtables legacy infrastructure.
5) Restore selftests by toggling NETFILTER_XTABLES_LEGACY where needed.
From Florian Westphal.
6) Use CONFIG_INET_SCTP_DIAG in tools/testing/selftests/net/netfilter/config,
from Sebastian Andrzej Siewior.
7) Use timer_delete in comment in IPVS codebase, from WangYuli.
8) Dump flowtable information in nfnetlink_hook, this includes an initial
patch to consolidate common code in helper function, from Phil Sutter.
9) Remove unused arguments in nft_pipapo set backend, from Florian Westphal.
10) Return nft_set_ext instead of boolean in set lookup function,
from Florian Westphal.
11) Remove indirection in dynamic set infrastructure, also from Florian.
12) Consolidate pipapo_get/lookup, from Florian.
13) Use kvmalloc in nft_pipapop, from Florian Westphal.
14) syzbot reports slab-out-of-bounds in xt_nfacct log message,
fix from Florian Westphal.
15) Ignored tainted kernels in selftest nft_interface_stress.sh,
from Phil Sutter.
16) Fix IPVS selftest by disabling rp_filter with ipip tunnel device,
from Yi Chen.
* tag 'nf-next-25-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
selftests: netfilter: ipvs.sh: Explicity disable rp_filter on interface tunl0
selftests: netfilter: Ignore tainted kernels in interface stress test
netfilter: xt_nfacct: don't assume acct name is null-terminated
netfilter: nft_set_pipapo: prefer kvmalloc for scratch maps
netfilter: nft_set_pipapo: merge pipapo_get/lookup
netfilter: nft_set: remove indirection from update API call
netfilter: nft_set: remove one argument from lookup and update functions
netfilter: nft_set_pipapo: remove unused arguments
netfilter: nfnetlink_hook: Dump flowtable info
netfilter: nfnetlink: New NFNLA_HOOK_INFO_DESC helper
ipvs: Rename del_timer in comment in ip_vs_conn_expire_now()
selftests: netfilter: Enable CONFIG_INET_SCTP_DIAG
selftests: net: Enable legacy netfilter legacy options.
netfilter: Exclude LEGACY TABLES on PREEMPT_RT.
netfilter: conntrack: Remove unused net in nf_conntrack_double_lock()
netfilter: nf_tables: Remove unused nft_reduce_is_readonly()
netfilter: x_tables: Remove unused functions xt_{in|out}name()
netfilter: load nf_log_syslog on enabling nf_conntrack_log_invalid
netfilter: conntrack: table full detailed log
====================
Link: https://patch.msgid.link/20250725170340.21327-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Gabriel Goller
|
f24987ef69 |
ipv6: add force_forwarding sysctl to enable per-interface forwarding
It is currently impossible to enable ipv6 forwarding on a per-interface basis like in ipv4. To enable forwarding on an ipv6 interface we need to enable it on all interfaces and disable it on the other interfaces using a netfilter rule. This is especially cumbersome if you have lots of interfaces and only want to enable forwarding on a few. According to the sysctl docs [0] the `net.ipv6.conf.all.forwarding` enables forwarding for all interfaces, while the interface-specific `net.ipv6.conf.<interface>.forwarding` configures the interface Host/Router configuration. Introduce a new sysctl flag `force_forwarding`, which can be set on every interface. The ip6_forwarding function will then check if the global forwarding flag OR the force_forwarding flag is active and forward the packet. To preserve backwards-compatibility reset the flag (on all interfaces) to 0 if the net.ipv6.conf.all.forwarding flag is set to 0. Add a short selftest that checks if a packet gets forwarded with and without `force_forwarding`. [0]: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Gabriel Goller <g.goller@proxmox.com> Link: https://patch.msgid.link/20250722081847.132632-1-g.goller@proxmox.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Breno Leitao
|
5ec9b15d8d |
selftests: net: Skip test if IPv6 is not configured
Extend the `check_for_dependencies()` function in `lib_netcons.sh` to check whether IPv6 is enabled by verifying the existence of `/proc/net/if_inet6`. Having IPv6 is a now a dependency of netconsole tests. If the file does not exist, the script will skip the test with an appropriate message suggesting to verify if `CONFIG_IPV6` is enabled. This prevents the test to misbehave if IPv6 is not configured. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250723-netcons_test_ipv6-v1-1-41c9092f93f9@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Stanislav Fomichev
|
f6c650c8d8 |
selftests: rtnetlink: add macsec and vlan nesting test
Add reproducer for [0] with a dummy device. 0: https://lore.kernel.org/netdev/2aff4342b0f5b1539c02ffd8df4c7e58dd9746e7.camel@nvidia.com/ Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250723224715.1341121-2-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Yi Chen
|
8b4a1a46e8 |
selftests: netfilter: ipvs.sh: Explicity disable rp_filter on interface tunl0
Although setup_ns() set net.ipv4.conf.default.rp_filter=0,
loading certain module such as ipip will automatically create a tunl0 interface
in all netns including new created ones. In the script, this is before than
default.rp_filter=0 applied, as a result tunl0.rp_filter remains set to 1
which causes the test report FAIL when ipip module is preloaded.
Before fix:
Testing DR mode...
Testing NAT mode...
Testing Tunnel mode...
ipvs.sh: FAIL
After fix:
Testing DR mode...
Testing NAT mode...
Testing Tunnel mode...
ipvs.sh: PASS
Fixes:
|
||
|
Phil Sutter
|
8d1c91850d |
selftests: netfilter: Ignore tainted kernels in interface stress test
Complain about kernel taint value only if it wasn't set at start
already.
Fixes:
|
||
|
Sebastian Andrzej Siewior
|
ba71a6e58b |
selftests: netfilter: Enable CONFIG_INET_SCTP_DIAG
The config snippet specifies CONFIG_SCTP_DIAG. This was never an option. Replace CONFIG_SCTP_DIAG with the intended CONFIG_INET_SCTP_DIAG. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
||
|
Florian Westphal
|
3c3ab65f00 |
selftests: net: Enable legacy netfilter legacy options.
Some specified options rely on NETFILTER_XTABLES_LEGACY to be enabled. IP_NF_TARGET_TTL for instance depends on IP_NF_MANGLE which in turn depends on IP_NF_IPTABLES_LEGACY -> NETFILTER_XTABLES_LEGACY. Enable relevant iptables config options explicitly, this is needed to avoid breakage when symbols related to iptables-legacy will depend on NETFILTER_LEGACY resp. IP_TABLES_LEGACY. This also means that the classic tables (Kernel modules) will not be enabled by default, so enable them too. Signed-off-by: Florian Westphal <fw@strlen.de> [bigeasy: Split out the config bits from the main patch] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> |
||
|
Linus Torvalds
|
2942242dde |
11 hotfixes. 9 are cc:stable and the remainder address post-6.15 issues
or aren't considered necessary for -stable kernels. 7 are for MM. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaILYBgAKCRDdBJ7gKXxA jo0uAQDvTlAjH6TcgRW/cbqHRIeiRoZ9Bwh/RUlJXM9neDR2LgEA41B+ohTsxUmZ OhM3Ce94tiGrHnVlW3SsmVaO+1TjGAU= =KUR9 -----END PGP SIGNATURE----- Merge tag 'mm-hotfixes-stable-2025-07-24-18-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "11 hotfixes. 9 are cc:stable and the remainder address post-6.15 issues or aren't considered necessary for -stable kernels. 7 are for MM" * tag 'mm-hotfixes-stable-2025-07-24-18-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: sprintf.h requires stdarg.h resource: fix false warning in __request_region() mm/damon/core: commit damos_quota_goal->nid kasan: use vmalloc_dump_obj() for vmalloc error reports mm/ksm: fix -Wsometimes-uninitialized from clang-21 in advisor_mode_show() mm: update MAINTAINERS entry for HMM nilfs2: reject invalid file types when reading inodes selftests/mm: fix split_huge_page_test for folio_split() tests mailmap: add entry for Senozhatsky mm/zsmalloc: do not pass __GFP_MOVABLE if CONFIG_COMPACTION=n mm/vmscan: fix hwpoisoned large folio handling in shrink_folio_list |
||
|
Lorenzo Stoakes
|
7d6597dfef |
tools/testing/selftests: explicitly test split multi VMA mremap move
Check that moving a range of VMAs where we are offset into the first and last VMAs works correctly. This results in the VMAs being split at these points at which we are offset into VMAs. We explicitly test both the ordinary MREMAP_FIXED multi VMA move case and the MREMAP_DONTUNMAP multi VMA move case. Link: https://lkml.kernel.org/r/b04920bb6c09dc86c207c251eab8ec670fbbcaef.1753119043.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Lorenzo Stoakes
|
7062387ed6 |
tools/testing/selftests: test MREMAP_DONTUNMAP on multiple VMA move
We support MREMAP_MAYMOVE | MREMAP_FIXED | MREMAP_DONTUNMAP for moving multiple VMAs via mremap(), so assert that the tests pass with both MREMAP_DONTUNMAP set and not set. Additionally, add success = false settings when mremap() fails. This is something that cannot realistically happen, so in no way impacted test outcome, but it is incorrect to indicate a test pass when something has failed. Link: https://lkml.kernel.org/r/d7359941981e4e44c774753b3e364d1c54928e6a.1753119043.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Lorenzo Stoakes
|
10aed7dac4 |
tools/testing/selftests: add mremap() shrink test for multiple VMAs
Patch series "tools/testing: expand mremap testing". Expand our mremap() testing to further assert that behaviour is as expected. There is a poorly documented mremap() feature whereby it is possible to mremap() multiple VMAs (even with gaps) when shrinking, as long as the resultant shrunk range spans only a single VMA. So we start by asserting this behaviour functions correctly both with an in-place shrink and a shrink/move. Next, we further test the newly introduced ability to mremap() multiple VMAs when performing a MAP_FIXED move (that is without the size being changed), firstly by asserting that MREMAP_DONTUNMAP has no bearing on this behaviour. Finally, we explicitly test that such moves, when splitting source VMAs, function correctly. This patch (of 3): There is an apparently little-known feature of mremap() whereby, in stark contrast to other modes (other than the recently introduced capacity to move multiple VMAs), the input source range span multiple VMAs with gaps between. This is, when shrinking a VMA, whether moving it or not, and the shrink would reduce the range to a single VMA - this is permitted, as the shrink is actioned by an unmap. This patch adds tests to assert that this behaves as expected. Link: https://lkml.kernel.org/r/cover.1753119043.git.lorenzo.stoakes@oracle.com Link: https://lkml.kernel.org/r/f08122893a26092a2bec6e69443e87f468ffdbed.1753119043.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
wang lian
|
6f1cc9fb47 |
selftests/mm: guard-regions: Use SKIP() instead of ksft_exit_skip()
To ensure only the current test is skipped on permission failure, instead of terminating the entire test binary. Link: https://lkml.kernel.org/r/20250717131857.59909-3-lianux.mm@gmail.com Signed-off-by: wang lian <lianux.mm@gmail.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Zi Yan <ziy@nvidia.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Kairui Song <ryncsn@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: SeongJae Park <sj@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
wang lian
|
3f6bfd4789 |
selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));"
Patch series "selftests/mm: reuse FORCE_READ to replace "asm volatile("" :
"+r" (XXX));" and some cleanup", v2.
This series introduces a common FORCE_READ() macro to replace the cryptic
asm volatile("" : "+r" (variable)); construct used in several mm
selftests. This improves code readability and maintainability by removing
duplicated, hard-to-understand code.
This patch (of 2):
Several mm selftests use the `asm volatile("" : "+r" (variable));`
construct to force a read of a variable, preventing the compiler from
optimizing away the memory access. This idiom is cryptic and duplicated
across multiple test files.
Following a suggestion from David[1], this patch refactors this common
pattern into a FORCE_READ() macro
Link: https://lkml.kernel.org/r/20250717131857.59909-1-lianux.mm@gmail.com
Link: https://lkml.kernel.org/r/20250717131857.59909-2-lianux.mm@gmail.com
Link: https://lore.kernel.org/lkml/4a3e0759-caa1-4cfa-bc3f-402593f1eee3@redhat.com/ [1]
Signed-off-by: wang lian <lianux.mm@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Suren Baghdasaryan
|
aadc099c48 |
selftests/proc: add verbose mode for /proc/pid/maps tearing tests
Add verbose mode to the /proc/pid/maps tearing tests to print debugging information. VERBOSE environment variable is used to enable it. Usage example: VERBOSE=1 ./proc-maps-race Link: https://lkml.kernel.org/r/20250719182854.3166724-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand <david@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jeongjun Park <aha310510@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Paul E . McKenney" <paulmck@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: T.J. Mercier <tjmercier@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Ye Bin <yebin10@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Suren Baghdasaryan
|
6a45336b9b |
selftests/proc: extend /proc/pid/maps tearing test to include vma remapping
Test that /proc/pid/maps does not report unexpected holes in the address space when we concurrently remap a part of a vma into the middle of another vma. This remapping results in the destination vma being split into three parts and the part in the middle being patched back from, all done concurrently from under the reader. We should always see either original vma or the split one with no holes. Link: https://lkml.kernel.org/r/20250719182854.3166724-4-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand <david@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jeongjun Park <aha310510@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Paul E . McKenney" <paulmck@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: T.J. Mercier <tjmercier@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Ye Bin <yebin10@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Suren Baghdasaryan
|
b11d9e2d78 |
selftests/proc: extend /proc/pid/maps tearing test to include vma resizing
Test that /proc/pid/maps does not report unexpected holes in the address space when a vma at the edge of the page is being concurrently remapped. This remapping results in the vma shrinking and expanding from under the reader. We should always see either shrunk or expanded (original) version of the vma. Link: https://lkml.kernel.org/r/20250719182854.3166724-3-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand <david@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jeongjun Park <aha310510@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Paul E . McKenney" <paulmck@kernel.org> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: T.J. Mercier <tjmercier@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Ye Bin <yebin10@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Suren Baghdasaryan
|
beb69e8172 |
selftests/proc: add /proc/pid/maps tearing from vma split test
Patch series "use per-vma locks for /proc/pid/maps reads", v8.
Reading /proc/pid/maps requires read-locking mmap_lock which prevents any
other task from concurrently modifying the address space. This guarantees
coherent reporting of virtual address ranges, however it can block
important updates from happening. Oftentimes /proc/pid/maps readers are
low priority monitoring tasks and them blocking high priority tasks
results in priority inversion.
Locking the entire address space is required to present fully coherent
picture of the address space, however even current implementation does not
strictly guarantee that by outputting vmas in page-size chunks and
dropping mmap_lock in between each chunk. Address space modifications are
possible while mmap_lock is dropped and userspace reading the content is
expected to deal with possible concurrent address space modifications.
Considering these relaxed rules, holding mmap_lock is not strictly needed
as long as we can guarantee that a concurrently modified vma is reported
either in its original form or after it was modified.
This patchset switches from holding mmap_lock while reading /proc/pid/maps
to taking per-vma locks as we walk the vma tree. This reduces the
contention with tasks modifying the address space because they would have
to contend for the same vma as opposed to the entire address space.
Previous version of this patchset [1] tried to perform /proc/pid/maps
reading under RCU, however its implementation is quite complex and the
results are worse than the new version because it still relied on
mmap_lock speculation which retries if any part of the address space gets
modified. New implementaion is both simpler and results in less
contention. Note that similar approach would not work for /proc/pid/smaps
reading as it also walks the page table and that's not RCU-safe.
Paul McKenney's designed a test [2] to measure mmap/munmap latencies while
concurrently reading /proc/pid/maps. The test has a pair of processes
scanning /proc/PID/maps, and another process unmapping and remapping 4K
pages from a 128MB range of anonymous memory. At the end of each 10
second run, the latency of each mmap() or munmap() operation is measured,
and for each run the maximum and mean latency is printed. The map/unmap
process is started first, its PID is passed to the scanners, and then the
map/unmap process waits until both scanners are running before starting
its timed test. The scanners keep scanning until the specified
/proc/PID/maps file disappears.
The latest results from Paul:
Stock mm-unstable, all of the runs had maximum latencies in excess of 0.5
milliseconds, and with 80% of the runs' latencies exceeding a full
millisecond, and ranging up beyond 4 full milliseconds. In contrast, 99%
of the runs with this patch series applied had maximum latencies of less
than 0.5 milliseconds, with the single outlier at only 0.608 milliseconds.
From a median-performance (as opposed to maximum-latency) viewpoint, this
patch series also looks good, with stock mm weighing in at 11 microseconds
and patch series at 6 microseconds, better than a 2x improvement.
Before the change:
./run-proc-vs-map.sh --nsamples 100 --rawdata -- --busyduration 2
0.011 0.008 0.521
0.011 0.008 0.552
0.011 0.008 0.590
0.011 0.008 0.660
...
0.011 0.015 2.987
0.011 0.015 3.038
0.011 0.016 3.431
0.011 0.016 4.707
After the change:
./run-proc-vs-map.sh --nsamples 100 --rawdata -- --busyduration 2
0.006 0.005 0.026
0.006 0.005 0.029
0.006 0.005 0.034
0.006 0.005 0.035
...
0.006 0.006 0.421
0.006 0.006 0.423
0.006 0.006 0.439
0.006 0.006 0.608
The patchset also adds a number of tests to check for /proc/pid/maps data
coherency. They are designed to detect any unexpected data tearing while
performing some common address space modifications (vma split, resize and
remap). Even before these changes, reading /proc/pid/maps might have
inconsistent data because the file is read page-by-page with mmap_lock
being dropped between the pages. An example of user-visible inconsistency
can be that the same vma is printed twice: once before it was modified and
then after the modifications. For example if vma was extended, it might
be found and reported twice. What is not expected is to see a gap where
there should have been a vma both before and after modification. This
patchset increases the chances of such tearing, therefore it's even more
important now to test for unexpected inconsistencies.
In [3] Lorenzo identified the following possible vma merging/splitting
scenarios:
Merges with changes to existing vmas:
1 Merge both - mapping a vma over another one and between two vmas which
can be merged after this replacement;
2. Merge left full - mapping a vma at the end of an existing one and
completely over its right neighbor;
3. Merge left partial - mapping a vma at the end of an existing one and
partially over its right neighbor;
4. Merge right full - mapping a vma before the start of an existing one
and completely over its left neighbor;
5. Merge right partial - mapping a vma before the start of an existing one
and partially over its left neighbor;
Merges without changes to existing vmas:
6. Merge both - mapping a vma into a gap between two vmas which can be
merged after the insertion;
7. Merge left - mapping a vma at the end of an existing one;
8. Merge right - mapping a vma before the start end of an existing one;
Splits
9. Split with new vma at the lower address;
10. Split with new vma at the higher address;
If such merges or splits happen concurrently with the /proc/maps reading
we might report a vma twice, once before the modification and once after
it is modified:
Case 1 might report overwritten and previous vma along with the final
merged vma;
Case 2 might report previous and the final merged vma;
Case 3 might cause us to retry once we detect the temporary gap caused by
shrinking of the right neighbor;
Case 4 might report overritten and the final merged vma;
Case 5 might cause us to retry once we detect the temporary gap caused by
shrinking of the left neighbor;
Case 6 might report previous vma and the gap along with the final marged
vma;
Case 7 might report previous and the final merged vma;
Case 8 might report the original gap and the final merged vma covering the
gap;
Case 9 might cause us to retry once we detect the temporary gap caused by
shrinking of the original vma at the vma start;
Case 10 might cause us to retry once we detect the temporary gap caused by
shrinking of the original vma at the vma end;
In all these cases the retry mechanism prevents us from reporting possible
temporary gaps.
[1] https://lore.kernel.org/all/20250418174959.1431962-1-surenb@google.com/
[2] https://github.com/paulmckrcu/proc-mmap_sem-test
[3] https://lore.kernel.org/all/e1863f40-39ab-4e5b-984a-c48765ffde1c@lucifer.local/
The /proc/pid/maps file is generated page by page, with the mmap_lock
released between pages. This can lead to inconsistent reads if the
underlying vmas are concurrently modified. For instance, if a vma split
or merge occurs at a page boundary while /proc/pid/maps is being read, the
same vma might be seen twice: once before and once after the change. This
duplication is considered acceptable for userspace handling. However,
observing a "hole" where a vma should be (e.g., due to a vma being
replaced and the space temporarily being empty) is unacceptable.
Implement a test that:
1. Forks a child process which continuously modifies its address
space, specifically targeting a vma at the boundary between two pages.
2. The parent process repeatedly reads the child's /proc/pid/maps.
3. The parent process checks the last vma of the first page and the
first vma of the second page for consistency, looking for the effects
of vma splits or merges.
The test duration is configurable via DURATION environment variable
expressed in seconds. The default test duration is 5 seconds.
Example Command: DURATION=10 ./proc-maps-race
Link: https://lore.kernel.org/all/20250418174959.1431962-1-surenb@google.com/ [1]
Link: https://github.com/paulmckrcu/proc-mmap_sem-test [2]
Link: https://lore.kernel.org/all/e1863f40-39ab-4e5b-984a-c48765ffde1c@lucifer.local/ [3]
Link: https://lkml.kernel.org/r/20250719182854.3166724-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250719182854.3166724-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jeongjun Park <aha310510@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Ye Bin <yebin10@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Lorenzo Stoakes
|
d53f248258 |
tools/testing/selftests: extend mremap_test to test multi-VMA mremap
Now that we have added the ability to move multiple VMAs at once, assert that this functions correctly, both overwriting VMAs and moving backwards and forwards with merge and VMA invalidation. Additionally assert that page tables are correctly propagated by setting random data and reading it back. Link: https://lkml.kernel.org/r/139074a24a011ca4ed52498a7fa2080024b43917.1752770784.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Daniel Zahka
|
b25b44cd17 |
selftests: drv-net: tso: fix non-tunneled tso6 test case name
The non-tunneled tso6 test case was showing up as:
ok 8 tso.ipv4
This is because of the way test_builder() uses the inner_ipver arg in
test naming, and how test_info is iterated over in main(). Given that
some tunnels not supported yet, e.g. ipip or sit, only support ipv4 or
ipv6 as the inner network protocol, I think the best fix here is to
call test_builder() in separate branches for tunneled and non-tunneled
tests, and to make supported inner l3 types an explicit attribute of
tunnel test cases.
# Detected qstat for LSO wire-packets
TAP version 13
1..14
ok 1 tso.ipv4
# Testing with mangleid enabled
ok 2 tso.vxlan4_ipv4
ok 3 tso.vxlan4_ipv6
# Testing with mangleid enabled
ok 4 tso.vxlan_csum4_ipv4
ok 5 tso.vxlan_csum4_ipv6
# Testing with mangleid enabled
ok 6 tso.gre4_ipv4
ok 7 tso.gre4_ipv6
ok 8 tso.ipv6
# Testing with mangleid enabled
ok 9 tso.vxlan6_ipv4
ok 10 tso.vxlan6_ipv6
# Testing with mangleid enabled
ok 11 tso.vxlan_csum6_ipv4
ok 12 tso.vxlan_csum6_ipv6
# Testing with mangleid enabled
ok 13 tso.gre6_ipv4
ok 14 tso.gre6_ipv6
# Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes:
|
||
|
Daniel Zahka
|
2cfbcc5d8a |
selftests: drv-net: tso: fix vxlan tunnel flags to get correct gso_type
When vxlan is used with ipv6 as the outer network header, the correct
ip link parameters for acheiving the SKB_GSO_UDP_TUNNEL gso type is
"udp6zerocsumtx udp6zerocsumrx". Otherwise the gso type will be
SKB_GSO_UDP_TUNNEL_CSUM.
This bug was the reason for the second of the three possible
invocations of run_one_stream() invocations, so that can be deleted as
well. We only need to test with the feature off and on.
Fixes:
|
||
|
Daniel Zahka
|
266b835e5e |
selftests: drv-net: tso: enable test cases based on hw_features
tso.py uses the active features at the time of test execution
as the set of available gso features to test. This means if a gso
feature is supported but toggled off at test start, the test will be
skipped with a "Device does not support {feature}" message.
Instead, we can enumerate the set of toggleable features by capturing
the driver's hw_features bitmap. To avoid configuration side-effects
from running the test, we also snapshot the wanted_features flag set
before making any feature changes, and then attempt to restore the
same set of wanted_features before test exit.
Fixes:
|
||
|
Gal Pressman
|
d74cd9a02f |
selftests: drv-net: Make command requirements explicit
Make require_cmd() calls explicit about whether commands are needed locally, remotely, or both. Since require_cmd() defaults to local=True, tests should explicitly set local=False when commands are only needed remotely. - socat: Set local=False since it's only needed on remote hosts. - iperf3: Use single call with both local=True and remote=True since it's needed on both hosts. This avoids unnecessary test failures when commands are missing locally but available remotely where actually needed, and consolidates a duplicate require_cmd() call into single call that checks both hosts. Fixes: |
||
|
Gal Pressman
|
b4d52c6982 |
selftests: drv-net: Fix remote command checking in require_cmd()
The require_cmd() method was checking for command availability locally
even when remote=True was specified, due to a missing host parameter.
Fix by passing host=self.remote when checking remote command
availability, ensuring commands are verified on the correct host.
Fixes:
|