The current netlink API for WireGuard does not directly support removal
of allowed ips from a peer. A user can remove an allowed ip from a peer
in one of two ways:
1. By using the WGPEER_F_REPLACE_ALLOWEDIPS flag and providing a new
list of allowed ips which omits the allowed ip that is to be removed.
2. By reassigning an allowed ip to a "dummy" peer then removing that
peer with WGPEER_F_REMOVE_ME.
With the first approach, the driver completely rebuilds the allowed ip
list for a peer. If my current configuration is such that a peer has
allowed ips 192.168.0.2 and 192.168.0.3 and I want to remove 192.168.0.2
the actual transition looks like this.
[192.168.0.2, 192.168.0.3] <-- Initial state
[] <-- Step 1: Allowed ips removed for peer
[192.168.0.3] <-- Step 2: Allowed ips added back for peer
This is true even if the allowed ip list is small and the update does
not need to be batched into multiple WG_CMD_SET_DEVICE requests, as the
removal and subsequent addition of ips is non-atomic within a single
request. Consequently, wg_allowedips_lookup_dst and
wg_allowedips_lookup_src may return NULL while reconfiguring a peer even
for packets bound for ips a user did not intend to remove leading to
unintended interruptions in connectivity. This presents in userspace as
failed calls to sendto and sendmsg for UDP sockets. In my case, I ran
netperf while repeatedly reconfiguring the allowed ips for a peer with
wg.
/usr/local/bin/netperf -H 10.102.73.72 -l 10m -t UDP_STREAM -- -R 1 -m 1024
send_data: data send error: No route to host (errno 113)
netperf: send_omni: send_data failed: No route to host
While this may not be of particular concern for environments where peers
and allowed ips are mostly static, systems like Cilium manage peers and
allowed ips in a dynamic environment where peers (i.e. Kubernetes nodes)
and allowed ips (i.e. pods running on those nodes) can frequently
change making WGPEER_F_REPLACE_ALLOWEDIPS problematic.
The second approach avoids any possible connectivity interruptions
but is hacky and less direct, requiring the creation of a temporary
peer just to dispose of an allowed ip.
Introduce a new flag called WGALLOWEDIP_F_REMOVE_ME which in the same
way that WGPEER_F_REMOVE_ME allows a user to remove a single peer from
a WireGuard device's configuration allows a user to remove an ip from a
peer's set of allowed ips. This enables incremental updates to a
device's configuration without any connectivity blips or messy
workarounds.
A corresponding patch for wg extends the existing `wg set` interface to
leverage this feature.
$ wg set wg0 peer <PUBKEY> allowed-ips +192.168.88.0/24,-192.168.0.1/32
When '+' or '-' is prepended to any ip in the list, wg clears
WGPEER_F_REPLACE_ALLOWEDIPS and sets the WGALLOWEDIP_F_REMOVE_ME flag on
any ip prefixed with '-'.
Signed-off-by: Jordan Rife <jordan@jrife.io>
[Jason: minor style nits, fixes to selftest, bump of wireguard-tools version]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250521212707.1767879-5-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since 1b620d539c ("kbuild: disable header exports for UML in a
straightforward way"), installing headers fails on UML, so just disable
installing them, since they're not needed anyway on the architecture.
Fixes: b438b3b8d6 ("wireguard: selftests: support UML")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This shoud open up various possibilities like time travel execution, and
is also just another platform to help shake out bugs.
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This makes for faster tests, faster compile time, and allows us to ditch
ACPI finally.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These selftests are used for much more extensive changes than just the
wireguard source files. So always call the kernel's build file, which
will do something or nothing after checking the whole tree, per usual.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By forcing the maximum CPU that QEMU has available, we expose additional
capabilities, such as the RNDR instruction, which increases test
coverage. This then allows the CI to skip the fake seeding step in some
cases. Also enable STRICT_KERNEL_RWX to catch issues related to early
jump labels when the RNG is initialized at boot.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Use newer, more reliable package dependencies. These should hopefully
reduce flakes. However, we keep the old iputils package, as it
accumulated bugs after resulting in flakes on slow machines.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When moving to non-system toolchains, we inadvertantly killed the
ability to use ccache. So instead, build ccache support into the test
harness directly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than relying on the system to have cross toolchains available,
simply download musl.cc's ones and use that libc.so, and then we use it
to fill in a few missing platforms, such as riscv64, riscv64, powerpc64,
and s390x.
Since riscv doesn't have a second serial port in its device description,
we have to use virtio's vport. This is actually the same situation on
ARM, but we were previously hacking QEMU up to work around this, which
required a custom QEMU. Instead just do the vport trick on ARM too.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gcc-10 switched to defaulting to -fno-common, which broke iproute2-5.4.
This was fixed in iproute-5.6, so switch to that. Because we're after a
stable testing surface, we generally don't like to bump these
unnecessarily, but in this case, being able to actually build is a basic
necessity.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case this helps expose bugs with the newer 64-bit time_t types, we do
our testing with the newer musl that supports this as well as
CONFIG_COMPAT_32BIT_TIME=n. This matters to us, since wireguard does in
fact deal with timestamps.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This gives us fewer dependencies and shortens build time, fixes up some
hash checking race conditions, and also fixes missing directory creation
that caused issues on massively parallel builds.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Quite a bit of the test suite was designed to work with ancient kernels.
Thankfully we no longer have to deal with this. This commit updates
things that we can finally update and removes things that we can finally
remove, to avoid the build-up of the last several years as a result of
having to support ancient kernels. We can finally rely on suppress_
prefixlength being available. On the build side of things, the no-PIE
hack is no longer required, and we can bump some of the tools, repair
our m68k and i686-kvm support, and get better coverage of the static
branches used in the crypto lib and in udp_tunnel.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WireGuard has been using this on build.wireguard.com for the last
several years with considerable success. It allows for very quick and
iterative development cycles, and supports several platforms.
To run the test suite on your current platform in QEMU:
$ make -C tools/testing/selftests/wireguard/qemu -j$(nproc)
To run it with KASAN and such turned on:
$ DEBUG_KERNEL=yes make -C tools/testing/selftests/wireguard/qemu -j$(nproc)
To run it emulated for another platform in QEMU:
$ ARCH=arm make -C tools/testing/selftests/wireguard/qemu -j$(nproc)
At the moment, we support aarch64_be, aarch64, arm, armeb, i686, m68k,
mips64, mips64el, mips, mipsel, powerpc64le, powerpc, and x86_64.
The system supports incremental rebuilding, so it should be very fast to
change a single file and then test it out and have immediate feedback.
This requires for the right toolchain and qemu to be installed prior.
I've had success with those from musl.cc.
This is tailored for WireGuard at the moment, though later projects
might generalize it for other network testing.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
