Lei Chen reported a bug with CLOCK_MONOTONIC_COARSE having inconsistencies
when NTP is adjusting the clock frequency.
This has gone seemingly undetected for ~15 years, illustrating a clear gap
in our testing.
The skew_consistency test is intended to catch this sort of problem, but
was focused on only evaluating CLOCK_MONOTONIC, and thus missed the problem
on CLOCK_MONOTONIC_COARSE.
So adjust the test to run with all clockids for 60 seconds each instead of
10 minutes with just CLOCK_MONOTONIC.
Reported-by: Lei Chen <lei.chen@smartx.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250320200306.1712599-2-jstultz@google.com
Closes: https://lore.kernel.org/lkml/20250310030004.3705801-1-lei.chen@smartx.com/
The exact timer ID allocation mode is used by CRIU to restore timers with a
given ID. Add a test case for it.
It's skipped on older kernels when the prctl() fails.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/8734fl2tkx.ffs@tglx
When adapting the test to the kselftest framework, a few printf() calls
indicating test progress were not updated.
Fix this by replacing these printf() calls by ksft_print_msg() calls.
Link: https://lore.kernel.org/r/7dd4b9ab6e43268846e250878ebf25ae6d3d01ce.1733994134.git.geert+renesas@glider.be
Fixes: ce7d101750 ("selftests: timers: clocksource-switch: adapt to kselftest framework")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
timers tests defines CLOCKIDs locally. Remove all local CLOCKIDs except
CLOCK_HWSPECIFIC and use defines from time.h header file.
CLOCK_HWSPECIFIC and CLOCK_SGI_CYCLE are the same and CLOCK_SGI_CYCLE
is deprecated,
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
improve timer_create failure message with strerror() function
to give more information to the user.
Signed-off-by: Gianfranco Trad <gianf.trad@gmail.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Remove local NSEC_PER_SEC and USEC_PER_SEC defines. Pick them up from
include/vdso/time64.h. This requires -I $(top_srcdir) to the timers
Makefile to include the include/vdso/time64.h.
posix_timers test names the defines NSECS_PER_SEC and USECS_PER_SEC.
Change posix_timers test references to the defines to match the
defines in the header file.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
__fatal_error routine doesn't check strerror_r() return value,
which results in the following compile time warning:
posix_timers.c: In function ‘__fatal_error’:
posix_timers.c:31:9: warning: ignoring return value of ‘strerror_r’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
31 | strerror_r(errno, buf, sizeof(buf));
Fix this by adding a check for return value and error handling appropriate
for the GNU-specific strerror_r() in use in __fatal_error(). Check if
return string is null and handle accordingly.
From Linux strerror_r() manual page:
"The GNU-specific strerror_r() returns a pointer to a string containing
the error message. This may be either a pointer to a string that the
function stores in buf, or a pointer to some (immutable) static string
(in which case buf is unused). If the function stores a string in buf,
then at most buflen bytes are stored (the string may be truncated if
buflen is too small and errnum is unknown). The string always includes
a terminating null byte."
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This kselftest update for Linux 6.12-rc1 consists of:
-- test coverage for dup_fd() failure handling in unshare_fd()
-- new selftest for the acct() syscall
-- basic uprobe testcase
-- several small fixes and cleanups to existing tests
-- user and strscpy removal as they became kunit tests
-- fixes to build failures and warnings
-----BEGIN PGP SIGNATURE-----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=bFgK
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
- test coverage for dup_fd() failure handling in unshare_fd()
- new selftest for the acct() syscall
- basic uprobe testcase
- several small fixes and cleanups to existing tests
- user and strscpy removal as they became kunit tests
- fixes to build failures and warnings
* tag 'linux_kselftest-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits)
selftests: kselftest: Use strerror() on nolibc
selftests/timers: Remove unused NSEC_PER_SEC macro
selftests:resctrl: Fix build failure on archs without __cpuid_count()
selftests/ftrace: Fix eventfs ownership testcase to find mount point
selftests: filesystems: fix warn_unused_result build warnings
selftests:core: test coverage for dup_fd() failure handling in unshare_fd()
selftests/ftrace: Fix test to handle both old and new kernels
kselftest: timers: Fix const correctness
selftests/ftrace: Add required dependency for kprobe tests
selftests: rust: config: disable GCC_PLUGINS
selftests: rust: config: add trailing newline
tracing/selftests: Run the ownership test twice
selftests/uprobes: Add a basic uprobe testcase
selftests: harness: rename __constructor_order for clarification
selftests: harness: remove unneeded __constructor_order_last()
selftest: acct: Add selftest for the acct() syscall
selftests: lib: remove strscpy test
selftests: user: remove user suite
kselftest: cpufreq: Add RTC wakeup alarm
selftests/exec: Fix grammar in an error message.
...
By reading the code, I found the macro NSEC_PER_SEC
is never referenced in the code. Just remove it.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make timespec pointers, pointers to const in checklist function. As a
consequence, make list parameter in checklist function pointer to const
as well. Const-correctness increases readability.
Improvement was found by running cppcheck tool on the patched file as
follows:
```
cppcheck --enable=all \
tools/testing/selftests/timers/threadtest.c \
--suppress=missingIncludeSystem \
--suppress=unusedFunction
```
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When a timer signal is blocked and later unblocked then one signal should
be delivered with the correct number of overruns since the timer was queued.
Validate that behaviour.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
timer_gettime() must return the correct expiry time for interval timers
even when the timer is not armed, which is the case when a signal is
pending but blocked.
Works correctly for regular posix timers, but not for posix CPU timers.
Add a selftest to validate the fixes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Posix timers with a delivery mode of SIGEV_NONE deliver no signals but the
remaining expiry time must be readable via timer_gettime() for both one
shot and interval timers.
That's implemented correctly for regular posix timers but broken for posix
CPU timers.
Add a self test so the fixes can be verified.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Add a test case to validate correct behaviour vs. timer reprogramming and
deletion.
The handling of queued signals in case of timer reprogramming or deletion
is inconsistent at best.
POSIX does not really specify the behaviour for that:
- "The effect of disarming or resetting a timer with pending expiration
notifications is unspecified."
- "The disposition of pending signals for the deleted timer is
unspecified."
In both cases it is reasonable to expect that pending signals are
discarded. Especially in the reprogramming case it does not make sense to
account for previous overruns or to deliver a signal for a timer which
has been disarmed.
Add tests to validate that no unexpected signals are delivered. They fail
for now until the signal and posix timer code is updated.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Add a test case to validate correct behaviour vs. SIG_IGN.
The posix specification states:
"Setting a signal action to SIG_IGN for a signal that is pending shall
cause the pending signal to be discarded, whether or not it is blocked."
The kernel implements this in the signal handling code, but due to the way
how posix timers are handling SIG_IGN for periodic timers, the behaviour
after installing a real handler again is inconsistent and suprising.
The following sequence is expected to deliver a signal:
install_handler(SIG);
block_signal(SIG);
timer_create(...); <- Should send SIG
timer_settime(value=100ms, interval=100ms);
sleep(1); <- Timer expires and queues signal, timer is not rearmed
as that should happen in the signal delivery path
ignore_signal(SIG); <- Discards queued signal
install_handler(SIG); <- Restore handler, should rearm but does not
sleep(1);
unblock_signal(SIG); <- Should deliver one signal with overrun count
set in siginfo
This fails because nothing rearms the timer when the signal handler is
restored. Add a test for this case which fails until the signal and posix
timer code is fixed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
No point in returning to main() on fatal errors. Just exit right away.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
When building with clang, via:
make LLVM=1 -C tools/testing/selftest
...clang warns about an unused irqcount variable. clang is correct: the
variable is incremented and then ignored.
Fix this by deleting the irqcount variable.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: John Stultz <jstultz@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
After commit f7d5bcd35d ("selftests: kselftest: Mark functions that
unconditionally call exit() as __noreturn"), ksft_exit_...() functions
are marked as __noreturn, which means the return type should not be
'int' but 'void' because they are not returning anything (and never were
since exit() has always been called).
To facilitate updating the return type of these functions, remove
'return' before the calls to ksft_exit_...(), as __noreturn prevents the
compiler from warning that a caller of the ksft_exit functions does not
return a value because the program will terminate upon calling these
functions.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Building with clang results in the following warning:
posix_timers.c:69:6: warning: absolute value function 'abs' given an
argument of type 'long long' but has parameter of type 'int' which may
cause truncation of value [-Wabsolute-value]
if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) {
^
So switch to using llabs() instead.
Fixes: 0bc4b0cf15 ("selftests: add basic posix timers selftests")
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410232637.4135564-3-jstultz@google.com
After commit 6d029c25b7 ("selftests/timers/posix_timers: Reimplement
check_timer_distribution()") the following warning occurs when building
with an older gcc:
posix_timers.c:250:2: warning: format not a string literal and no format arguments [-Wformat-security]
250 | ksft_print_msg(errmsg);
| ^~~~~~~~~~~~~~
Fix this up by changing it to ksft_print_msg("%s", errmsg)
Fixes: 6d029c25b7 ("selftests/timers/posix_timers: Reimplement check_timer_distribution()")
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Justin Stitt <justinstitt@google.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410232637.4135564-1-jstultz@google.com
The struct adjtimex freq field takes a signed value who's units are in
shifted (<<16) parts-per-million.
Unfortunately for negative adjustments, the straightforward use of:
freq = ppm << 16 trips undefined behavior warnings with clang:
valid-adjtimex.c:66:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
-499<<16,
~~~~^
valid-adjtimex.c:67:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value]
-450<<16,
~~~~^
..
Fix it by using a multiply by (1 << 16) instead of shifting negative values
in the valid-adjtimex test case. Align the values for better readability.
Reported-by: Lee Jones <joneslee@google.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240409202222.2830476-1-jstultz@google.com
Link: https://lore.kernel.org/lkml/0c6d4f0d-2064-4444-986b-1d1ed782135f@collabora.com/
check_timer_distribution() runs ten threads in a busy loop and tries to
test that the kernel distributes a process posix CPU timer signal to every
thread over time.
There is not guarantee that this is true even after commit bcb7ee7902
("posix-timers: Prefer delivery of signals to the current thread") because
that commit only avoids waking up the sleeping process leader thread, but
that has nothing to do with the actual signal delivery.
As the signal is process wide the first thread which observes sigpending
and wins the race to lock sighand will deliver the signal. Testing shows
that this hangs on a regular base because some threads never win the race.
The comment "This primarily tests that the kernel does not favour any one."
is wrong. The kernel does favour a thread which hits the timer interrupt
when CLOCK_PROCESS_CPUTIME_ID expires.
Rewrite the test so it only checks that the group leader sleeping in join()
never receives SIGALRM and the thread which burns CPU cycles receives all
signals.
In older kernels which do not have commit bcb7ee7902 ("posix-timers:
Prefer delivery of signals to the current thread") the test-case fails
immediately, the very 1st tick wakes the leader up. Otherwise it quickly
succeeds after 100 ticks.
CI testing wants to use newer selftest versions on stable kernels. In this
case the test is guaranteed to fail.
So check in the failure case whether the kernel version is less than v6.3
and skip the test result in that case.
[ tglx: Massaged change log, renamed the version check helper ]
Fixes: e797203fb3 ("selftests/timers/posix_timers: Test delivery of signals across threads")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240409133802.GD29396@redhat.com
Currently the nsleep-lat test does not produce KTAP output but rather a
custom format. This means that we only get a pass/fail for the suite, not
for each individual test that the suite does. Convert to using the standard
kselftest output functions which result in KTAP output being generated.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the posix_timers test does not produce KTAP output but rather a
custom format. This means that we only get a pass/fail for the suite, not
for each individual test that the suite does. Convert to using the standard
kselftest output functions which result in KTAP output being generated.
As part of this fix the printing of diagnostics in the unlikely event that
the pthread APIs fail, these were using perror() but the API functions
directly return an error code instead of setting errno.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Delete a duplicate assignment from this function implementation.
The note means ppm is average of the two actual freq samples.
But ppm have a duplicate assignment.
Signed-off-by: Minjie Du <duminjie@vivo.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Test that POSIX timers using CLOCK_PROCESS_CPUTIME_ID eventually deliver
a signal to all running threads. This effectively tests that the kernel
doesn't prefer any one thread (or subset of threads) for signal delivery.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230316123028.2890338-2-elver@google.com
So we have proper counters at the end of a test. We also print the
kselftest header at the end of the test, so we don't mix with the output
of the child process. There is only this one test anyhow.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
So the user can decide how long the test should run.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The sanity check takes a while. If you do repeated checks when
debugging, this is time consuming. Add a parameter to skip it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It is easier to check if you need to add an include if the existing ones
are sorted.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The return value from system() is a waitpid-style integer. Do not return
it directly because with the implicit masking in exit() it will always
return 0. Access it with appropriate macros to really pass on errors.
Fixes: 7290ce1423 ("selftests/timers: Add clocksource-switch test from timetest suite")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
So we have proper counters at the end of a test, e.g.:
# Totals: pass:11 fail:0 xfail:0 xpass:0 skip:1 error:0
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
So we have proper counters at the end of a test, e.g.:
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:8 error:0
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Mixing up argc/argv went unnoticed because they were not used. Still,
this is worth fixing.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Toolchains with an include file 'sys/timex.h' based on 3.18 will have a
'clock_adjtime' definition added, so it can't be static in the code:
valid-adjtimex.c:43:12: error: static declaration of ‘clock_adjtime’ follows non-static declaration
Fixes: e03a58c320 ("kselftests: timers: Add adjtimex SETOFFSET validity tests")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Global variables do not need to be initialized to 0 and checkpatch
flags this error in tools/testing/selftests/timers/alarmtimer-suspend.c:
ERROR: do not initialise globals to 0
+int final_ret = 0;
Fix this checkpatch error.
Signed-off-by: Zan Aziz <zanaziz313@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This test will require /dev/rtc0, the default RTC device, or one
specified by user to run. Since this default RTC is not guaranteed to
exist on all of the devices, so check its existence first, otherwise
skip this test with the kselftest skip code 4.
Without this patch this test will fail like this on a s390x zVM:
$ selftests: timers: rtcpie
$ /dev/rtc0: No such file or directory
not ok 1 selftests: timers: rtcpie # exit=22
With this patch:
$ selftests: timers: rtcpie
$ Default RTC /dev/rtc0 does not exist. Test Skipped!
not ok 9 selftests: timers: rtcpie # SKIP
Fixed up change log so "With this patch" text doesn't get dropped.
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The following 4 tests in timers can take longer than the default 45
seconds that added in commit 852c8cbf34 ("selftests/kselftest/runner.sh:
Add 45 second timeout per test") to run:
* nsleep-lat - 2m7.350s
* set-timer-lat - 2m0.66s
* inconsistency-check - 1m45.074s
* raw_skew - 2m0.013s
Thus they will be marked as failed with the current 45s setting:
not ok 3 selftests: timers: nsleep-lat # TIMEOUT
not ok 4 selftests: timers: set-timer-lat # TIMEOUT
not ok 6 selftests: timers: inconsistency-check # TIMEOUT
not ok 7 selftests: timers: raw_skew # TIMEOUT
Disable the timeout setting for timers can make these tests finish
properly:
ok 3 selftests: timers: nsleep-lat
ok 4 selftests: timers: set-timer-lat
ok 6 selftests: timers: inconsistency-check
ok 7 selftests: timers: raw_skew
https://bugs.launchpad.net/bugs/1864626
Fixes: 852c8cbf34 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
PTI has a significant impact on precision of the MONOTONIC_RAW clock,
which prevents a lot of computers from running the freq-step test.
Increase the maximum acceptable precision for the test to not be skipped
to 500 nanoseconds.
After commit 78b98e3c5a ("timekeeping/ntp: Determine the multiplier
directly from NTP tick length") the frequency and time errors should be
much smaller. Reduce the maximum acceptable values for the test to pass
to 0.02 ppm and 50 nanoseconds respectively.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Link: https://lkml.kernel.org/r/20190618160612.21957-1-mlichvar@redhat.com
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 64 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
licensed under the terms of the gnu gpl license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 62 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.929121379@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running under a pipe, some timer tests would not report output in
real-time because stdout flushes were missing after printf()s that lacked
a newline. This adds them to restore real-time status output that humans
can enjoy.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
posix_timers fails to build due to undefined reference errors:
aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey
-O2 -pipe -g -feliminate-unused-debug-types -O3 -Wl,-no-as-needed -Wall
-DKTEST -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lrt -lpthread
posix_timers.c
-o /build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers
/tmp/cc1FTZzT.o: In function `check_timer_create':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:157:
undefined reference to `timer_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/timers/posix_timers.c:170:
undefined reference to `timer_settime'
collect2: error: ld returned 1 exit status
It's GNU Make and linker specific.
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
https://lkml.org/lkml/2010/2/10/362
tools/perf: libraries must come after objects
Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libpthread.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
In the past we've warned when ADJ_OFFSET was in progress, usually
caused by ntpd or some other time adjusting daemon running in non
steady sate, which can cause the skew calculations to be
incorrect.
Thus, this patch checks to see if the clock was being adjusted
when we fail so that we don't cause false negatives.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Suggested-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
v2: Widened the checks to look for other clock adjustments that
could happen, as suggested by Miroslav
v3: Fixed up commit message
