"L2"/"L3" conversion to integer is embedded into get_cache_size()
which prevents reuse.
Create a helper for the cache string to integer conversion to make
it reusable.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
write_schemata() takes the test name as an argument and determines the
relevant resource based on the test name. Such mapping from name to
resource does not really belong to resctrlfs.c that should provide
only generic, test-independent functions.
Pass the resource stored in the test information structure to
write_schemata() instead of the test name. The new API is also more
flexible as it enables to use write_schemata() for more than one
resource within a test.
While touching the sprintf(), move the unnecessary %c that is always
'=' directly into the format string.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Each test currently has a "run test" function in per test file and
another resctrl_tests.c. The functions in resctrl_tests.c are almost
identical.
Generalize the one in resctrl_tests.c such that it can be shared
between all of the tests. It makes adding new tests easier and removes
the per test if () forests.
Also add comment to CPU vendor IDs that they must be defined as bits
for a bitmask.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
resctrl_tests reads a set of parameters and passes them individually
for each tests which causes variations in the call signature between
the tests.
Add struct input_params to hold all input parameters. It can be easily
passed to every test without varying the call signature.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
CAT test does not reset the CPU affinity after the benchmark.
This is relatively harmless as is because CAT test is the last
benchmark to run, however, more tests may be added later.
Store the CPU affinity the first time taskset_benchmark() is run and
add taskset_restore() which the test can call to reset the CPU mask to
its original value.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
CAT test spawns two processes into two different control groups with
exclusive schemata. Both the processes alloc a buffer from memory
matching their allocated LLC block size and flush the entire buffer out
of caches. Since the processes are reading through the buffer only once
during the measurement and initially all the buffer was flushed, the
test isn't testing CAT.
Rewrite the CAT test to allocate a buffer sized to half of LLC. Then
perform a sequence of tests with different LLC alloc sizes starting
from half of the CBM bits down to 1-bit CBM. Flush the buffer before
each test and read the buffer twice. Observe the LLC misses on the
second read through the buffer. As the allocated LLC block gets smaller
and smaller, the LLC misses will become larger and larger giving a
strong signal on CAT working properly.
The new CAT test is using only a single process because it relies on
measured effect against another run of itself rather than another
process adding noise. The rest of the system is set to use the CBM bits
not used by the CAT test to keep the test isolated.
Replace count_bits() with count_contiguous_bits() to get the first bit
position in order to be able to calculate masks based on it.
This change has been tested with a number of systems from different
generations.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When reading memory in order, HW prefetching optimizations will
interfere with measuring how caches and memory are being accessed. This
adds noise into the results.
Change the fill_buf reading loop to not use an obvious in-order access
using multiply by a prime and modulo.
Using a prime multiplier with modulo ensures the entire buffer is
eventually read. 23 is small enough that the reads are spread out but
wrapping does not occur very frequently (wrapping too often can trigger
L2 hits more frequently which causes noise to the test because getting
the data from LLC is not required).
It was discovered that not all primes work equally well and some can
cause wildly unstable results (e.g., in an earlier version of this
patch, the reads were done in reversed order and 59 was used as the
prime resulting in unacceptably high and unstable results in MBA and
MBM test on some architectures).
Link: https://lore.kernel.org/linux-kselftest/TYAPR01MB6330025B5E6537F94DA49ACB8B499@TYAPR01MB6330.jpnprd01.prod.outlook.com/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The fill_buf code prevents compiler optimizating the entire read loop
away by writing the final value of the variable into a file. While it
achieves the goal, writing into a file requires significant amount of
work within the innermost test loop and also error handling.
A simpler approach is to take advantage of volatile. Writing through
a pointer to a volatile variable is enough to prevent compiler from
optimizing the write away, and therefore compiler cannot remove the
read loop either.
Add a volatile 'value_sink' into resctrl_tests.c and make fill_buf to
write into it. As a result, the error handling in fill_buf.c can be
simplified.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Perf fd (pe_fd) is opened, reset, and enabled during every test the CAT
selftest runs. Also, ioctl(pe_fd, ...) calls are not error checked even
if ioctl() could return an error.
Open perf fd only once before the tests and only reset and enable the
counter within the test loop. Add error checking to pe_fd ioctl()
calls.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The main CAT test function is called cat_val() and resides in cache.c
which is illogical.
Rename the function to cat_test() and move it into cat_test.c.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Perf related variables pea_llc_miss, pe_read, and pe_fd are globals in
cache.c.
Convert them to locals for better scoping and make pea_llc_miss simpler
by renaming it to pea. Make close(pe_fd) handling easier to understand
by doing it inside cat_val().
Make also sizeof()s use safer way to determine the right struct.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
struct perf_event_attr initialization is spread into
perf_event_initialize() and perf_event_attr_initialize() and setting
->config is hardcoded by the deepest level.
perf_event_attr init belongs to perf_event_attr_initialize() so move it
entirely there. Rename the other function
perf_event_initialized_read_format().
Call each init function directly from the test as they will take
different parameters (especially true after the perf related global
variables are moved to local variables).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Naming for perf event related functions, types, and variables is
inconsistent.
Make struct read_format and all functions related to perf events start
with "perf_". Adjust variable names towards the same direction but use
shorter names for variables where appropriate (pe prefix).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Perf event handling has functions that are the sole caller of another
perf event handling related function:
- reset_enable_llc_perf() calls perf_event_open_llc_miss()
- perf_event_measure() calls get_llc_perf()
Remove the extra layer of calls to make the code easier to follow by
moving the code into the calling function.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Perf counters are __u64 but the code converts them to unsigned long
before printing them out.
Remove unnecessary type conversion and retain the perf originating
value as __u64.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
show_cache_info() calculates results and provides generic cache
information. This makes it hard to alter pass/fail conditions.
Separate the test specific checks into CAT and CMT test files and
leave only the generic information part into show_cache_info().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
measure_cache_vals() does a different thing depending on the test case
that called it:
- For CAT, it measures LLC misses through perf.
- For CMT, it measures LLC occupancy through resctrl.
Split these two functionalities into own functions the CAT and CMT
tests can call directly. Replace passing the struct resctrl_val_param
parameter with the filename because it's more generic and all those
functions need out of resctrl_val.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
CAT test doesn't take shareable bits into account, i.e., the test might
be sharing cache with some devices (e.g., graphics).
Introduce get_mask_no_shareable() and use it to provision an
environment for CAT test where the allocated LLC is isolated better.
Excluding shareable_bits may create hole(s) into the cbm_mask, thus add
a new helper count_contiguous_bits() to find the longest contiguous set
of CBM bits.
create_bit_mask() is needed by an upcoming CAT test rewrite so make it
available in resctrl.h right away.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
CAT and CMT tests calculate size of the cache portion for the n-bits
cache allocation on their own.
Add cache_portion_size() helper that calculates size of the cache
portion for the given number of bits and use it to replace the existing
span calculations. This also prepares for the new CAT test that will
need to determine the size of the cache portion also during results
processing.
Rename also 'cache_size' local variables to 'cache_total_size' to
prevent misinterpretations.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
get_cache_size() does not modify cache_type so it could be const.
Mark cache_type const so that const char * can be passed to it. This
prevents warnings once many of the test parameters are marked const.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Callers of get_cbm_mask() are required to pass a string into which the
capacity bitmask (CBM) is read. Neither CAT nor CMT tests need the
bitmask as string but just convert it into an unsigned long value.
Another limitation is that the bit mask reader can only read
.../cbm_mask files.
Generalize the bit mask reading function into get_bit_mask() such that
it can be used to handle other files besides the .../cbm_mask and
handles the unsigned long conversion within get_bit_mask() using
fscanf(). Change get_cbm_mask() to use get_bit_mask() and rename it to
get_full_cbm() to better indicate what the function does.
Return error from get_full_cbm() if the bitmask is zero for some reason
because it makes the code more robust as the selftests naturally assume
the bitmask has some bits.
Also mark cache_type const while at it and remove useless comments that
are related to processing of CBM bits.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There are unnecessary nested calls in fill_buf.c:
- run_fill_buf() calls fill_cache()
- alloc_buffer() calls malloc_and_init_memory()
Simplify the code flow and remove those unnecessary call levels by
moving the called code inside the calling function and remove the
duplicated error print.
Resolve the difference in run_fill_buf() and fill_cache() parameter
name into 'buf_size' which is more descriptive than 'span'. Also, while
moving the allocation related code, rename 'p' into 'buf' to be
consistent in naming the variables.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
MBM, MBA and CMT test cases call run_fill_buf() that in turn calls
fill_cache() to alloc and loop indefinitely around the buffer. This
binds buffer allocation and running the benchmark into a single bundle
so that a selftest cannot allocate a buffer once and reuse it. CAT test
doesn't want to loop around the buffer continuously and after rewrite
it needs the ability to allocate the buffer separately.
Split buffer allocation out of fill_cache() into alloc_buffer(). This
change is part of preparation for the new CAT test that allocates a
buffer and does multiple passes over the same buffer (but not in an
infinite loop).
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A number function comments state the function return non-zero on
failure but in reality they can only return 0 on success and < 0 on
error.
Update the comments to say < 0 on error to match the behavior.
While at it, improve cat_val() comment to state that 0 means the test
was run (either pass or fail).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
perf_event_open_llc_miss() calls ctrlc_handler() to cleanup if
perf_event_open() returns an error. Those cleanups, however, are not
the responsibility of perf_event_open_llc_miss() and it thus interferes
unnecessarily with the usual cleanup pattern. Worse yet,
ctrlc_handler() calls exit() in the end preventing the ordinary cleanup
done in the calling function from executing.
ctrlc_handler() should only be used as a signal handler, not during
normal error handling.
Remove call to ctrlc_handler() from perf_event_open_llc_miss(). As
unmounting resctrlfs and test cleanup are already handled properly
by error rollbacks in the calling functions, no other changes are
necessary.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A number of functions in the resctrl selftests return errno. It is
problematic because errno is positive which is often counterintuitive.
Also, every site returning errno prints the error message already with
ksft_perror() so there is not much added value in returning the precise
error code.
Simply convert all places returning errno to return -1 that is typical
userspace error code in case of failures.
While at it, improve resctrl_val() comment to state that 0 means the
test was run (either pass or fail).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The resctrl selftest code contains a number of perror() calls. Some of
them come with hash character and some don't. The kselftest framework
provides ksft_perror() that is compatible with test output formatting
so it should be used instead of adding custom hash signs.
Some perror() calls are too far away from anything that sets error.
For those call sites, ksft_print_msg() must be used instead.
Convert perror() to ksft_perror() or ksft_print_msg().
Other related changes:
- Remove hash signs
- Remove trailing stops & newlines from ksft_perror()
- Add terminating newlines for converted ksft_print_msg()
- Use consistent capitalization
- Small fixes/tweaks to typos & grammar of the messages
- Extract error printing out of PARENT_EXIT() to be able to
differentiate
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 20d96b25cc ("selftests/resctrl: Fix schemata write error
check") exposed a problem in feature detection logic in MBM selftest.
If schemata does not support MB:x=x entries, the schemata write to
initialize 100% memory bandwidth allocation in mbm_setup() will now
fail with -EINVAL due to the error handling corrected by the commit
20d96b25cc ("selftests/resctrl: Fix schemata write error check").
That commit just uncovers the failed write, it is not wrong itself.
If MB:x=x is not supported by schemata, it is safe to assume 100%
memory bandwidth is always set. Therefore, the previously ignored error
does not make the MBM test itself wrong.
Restore the previous behavior of MBM test by checking MB support before
attempting to write it into schemata which results in behavior
equivalent to ignoring the write error.
Fixes: 20d96b25cc ("selftests/resctrl: Fix schemata write error check")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
resctrlfs.c contains mostly functions that interact in some way with
resctrl FS entries while functions inside resctrl_val.c deal with
measurements and benchmarking.
run_benchmark() is located in resctrlfs.c even though it's purpose
is not interacting with the resctrl FS but to execute cache checking
logic.
Move run_benchmark() to resctrl_val.c just before resctrl_val() that
makes use of run_benchmark(). Make run_benchmark() static since it's
not used between multiple files anymore.
Remove return comment from kernel-doc since the function is type void.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Writing bitmasks to the schemata can fail when the bitmask doesn't
adhere to constraints defined by what a particular CPU supports.
Some example of constraints are max length or having contiguous bits.
The driver should properly return errors when any rule concerning
bitmask format is broken.
Resctrl FS returns error codes from fprintf() only when fclose() is
called. Current error checking scheme allows invalid bitmasks to be
written into schemata file and the selftest doesn't notice because the
fclose() error code isn't checked.
Substitute fopen(), flose() and fprintf() with open(), close() and
write() to avoid error code buffering between fprintf() and fclose().
Remove newline character from the schema string after writing it to
the schemata file so it prints correctly before function return.
Pass the string generated with strerror() to the "reason" buffer so
the error message is more verbose. Extend "reason" buffer so it can hold
longer messages.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The initial value of 5% chosen for the maximum allowed percentage
difference between resctrl mbm value and IMC mbm value in
commit 06bd03a57f ("selftests/resctrl: Fix MBA/MBM results reporting
format") was "randomly chosen value" (as admitted by the changelog).
When running tests in our lab across a large number platforms, 5%
difference upper bound for success seems a bit on the low side for the
MBA and MBM tests. Some platforms produce outliers that are slightly
above that, typically 6-7%, which leads MBA/MBM test frequently
failing.
Replace the "randomly chosen value" with a success bound that is based
on those measurements across large number of platforms by relaxing the
MBA/MBM success bound to 8%. The relaxed bound removes the failures due
the frequent outliers.
Fixed commit description style error during merge:
Shuah Khan <skhan@linuxfoundation.org>
Fixes: 06bd03a57f ("selftests/resctrl: Fix MBA/MBM results reporting format")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The MBA and CMT tests expect support of other features to be able to
run.
When platform only supports MBA but not MBM, MBA test will fail with:
Failed to open total bw file: No such file or directory
When platform only supports CMT but not CAT, CMT test will fail with:
Failed to open bit mask file '/sys/fs/resctrl/info/L3/cbm_mask': No such file or directory
It leads to the test reporting test fail (even if no test was run at
all).
Extend feature checks to cover these two conditions to show these tests
were skipped rather than failed.
Fixes: ee0415681e ("selftests/resctrl: Use resctrl/info for feature detection")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org> # selftests/resctrl: Refactor feature check to use resource and feature name
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Feature check in validate_resctrl_feature_request() takes in the test
name string and maps that to what to check per test.
Pass resource and feature names to validate_resctrl_feature_request()
directly rather than deriving them from the test name inside the
function which makes the feature check easier to extend for new test
cases.
Use !! in the return statement to make the boolean conversion more
obvious even if it is not strictly necessary from correctness point of
view (to avoid it looking like the function is returning a freed
pointer).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org> # selftests/resctrl: Remove duplicate feature check from CMT test
Cc: <stable@vger.kernel.org> # selftests/resctrl: Move _GNU_SOURCE define into Makefile
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
_GNU_SOURCE is defined in resctrl.h. Defining _GNU_SOURCE has a large
impact on what gets defined when including headers either before or
after it. This can result in compile failures if .c file decides to
include a standard header file before resctrl.h.
It is safer to define _GNU_SOURCE in Makefile so it is always defined
regardless of in which order includes are done.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The test runner run_cmt_test() in resctrl_tests.c checks for CMT
feature and does not run cmt_resctrl_val() if CMT is not supported.
Then cmt_resctrl_val() also check is CMT is supported.
Remove the duplicated feature check for CMT from cmt_resctrl_val().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Unmounting resctrl FS has been moved into the per test functions in
resctrl_tests.c by commit caddc0fbe4 ("selftests/resctrl: Move
resctrl FS mount/umount to higher level"). In case a signal (SIGINT,
SIGTERM, or SIGHUP) is received, the running selftest is aborted by
ctrlc_handler() which then unmounts resctrl fs before exiting. The
current section between signal_handler_register() and
signal_handler_unregister(), however, does not cover the entire
duration when resctrl FS is mounted.
Move signal_handler_register() and signal_handler_unregister() calls
from per test files into resctrl_tests.c to properly unmount resctrl
fs. In order to not add signal_handler_register()/unregister() n times,
create helpers test_prepare() and test_cleanup().
Do not call ksft_exit_fail_msg() in test_prepare() but only in the per
test function to keep the control flow cleaner without adding calls to
exit() deep into the call chain.
Adjust child process kill() call in ctrlc_handler() to only be invoked
if the child was already forked.
Fixes: caddc0fbe4 ("selftests/resctrl: Move resctrl FS mount/umount to higher level")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
signal_handler_unregister() calls sigaction() with uninitializing
sa_flags in the struct sigaction.
Make sure sa_flags is always initialized in signal_handler_unregister()
by initializing the struct sigaction when declaring it. Also add the
initialization to signal_handler_register() even if there are no know
bugs in there because correctness is then obvious from the code itself.
Fixes: 73c55fa5ab ("selftests/resctrl: Commonize the signal handler register/unregister for all tests")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Benchmark argument is handled by custom argument parsing code which is
more complicated than it needs to be.
Process benchmark argument within the normal getopt() handling and drop
unnecessary ben_ind and has_ben variables. When -b is given, terminate
the argument processing as -b consumes all remaining arguments.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
ben_count is only used to write the terminator for the list. It is
enough to use i from the loop so no need for another variable.
Remove ben_count variable as it is not needed.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Benchmark command is used in multiple tests so it should not be
mutated by the tests but CMT test alters span argument. Due to the
order of tests (CMT test runs last), mutating the span argument in CMT
test does not trigger any real problems currently.
Mark benchmark_cmd strings as const and setup the benchmark command
using pointers. Because the benchmark command becomes const, the input
arguments can be used directly. Besides being simpler, using the input
arguments directly also removes the internal size restriction.
CMT test has to create a copy of the benchmark command before altering
the benchmark command.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Benchmark command is initialized before resctrl FS check and
preparation code that can call ksft_exit_skip(). There is no strong
reason why the resctrl FS support check and unmounting it (if already
mounted), has to be done after the benchmark command initialization.
Move benchmark command initialization such that it is done not until
right before the tests commence. This simplifies rollback handling when
benchmark command initialization starts to use dynamic allocation (in a
change following this).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
struct resctrl_val_param contains span member. resctrl_val(), however,
never uses it because the value of span is embedded into the default
benchmark command and parsed from it by run_benchmark().
Remove span from resctrl_val_param. Provide DEFAULT_SPAN for the code
that needs it. CMT and CAT tests communicate span that is different
from the DEFAULT_SPAN between their internal functions which is
converted into passing it directly as a parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
bw_report is always set to "reads" and bm_type is set to "fill_buf" but
is never used.
Set bw_report directly to "reads" in MBA/MBM test and remove bm_type.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Benchmark command must be the last argument because it consumes all the
remaining arguments but help misleadingly shows it as the first
argument. The benchmark command is also shown in quotes but it does not
match with the code.
Correct -b argument place in the help message and remove the quotes.
Tweak also how the options are presented by using ... notation.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Benchmark command is copied into an array in the stack. The array is
BENCHMARK_ARGS items long but the command line could try to provide a
longer command. Argument size is also fixed by BENCHMARK_ARG_SIZE (63
bytes of space after fitting the terminating \0 character) and user
could have inputted argument longer than that.
Return error in case the benchmark command does not fit to the space
allocated for it.
Fixes: ecdbb911f2 ("selftests/resctrl: Add MBM test")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Compiling resctrl selftest after adding a __printf() attribute to
ksft_print_msg() exposes -Wformat warning in show_cache_info().
The format specifier used expects a variable of type int but a long
unsigned int variable is passed instead.
Change the format specifier to match the passed variable.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
cat_val() is only used during CAT test but it checks for test type.
Remove test type checks and the unused else branch from cat_val().
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Results include warm-up test which is discarded before passing the sum
to show_cache_info(). show_cache_info() handles this by subtracting one
from the number of tests in divisor. It is a trappy construct to have
sum and number of tests parameters to disagree like this.
A more logical place for subtracting the skipped tests is where the sum
is calculated so move it there. Pass the correct number of tests to
show_cache_info() so it can be used directly as the divisor for
calculating the average.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
CAT and CMT tests have count_of_bits, long_mask, cbm_mask, and
cache_size global variables that can be moved into the sole using
function.
Make the global variables local variables of the relevant function to
scope them better.
While at it, move cache_size initialization into the declaration line.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
struct resctrl_val_param has ->setup() function that accepts variable
argument list. All test cases use only 1 argument as input and it's
the struct resctrl_val_param pointer.
Instead of variable argument list, directly pass struct
resctrl_val_param pointer as the only parameter to ->setup().
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Test name is passed to fill_buf functions so that they can loop around
buffer only once. This is required for CAT test case.
To loop around buffer only once, caller doesn't need to let fill_buf
know which test case it is. Instead, pass a boolean argument 'once'
which makes fill_buf more generic.
As run_benchmark() no longer needs to pass the test name to
run_fill_buf(), a few test running functions can be simplified to not
write the test name into the default benchmark_cmd. The has_ben
argument can also be removed now from those test running functions.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
fill_buf's arguments can be improved in multiple ways:
- Multiple functions in fill_buf have start_ptr as one of their
argument which is a bit long and the extra "start" is pretty
obvious when it comes to pointers.
- Some of the functions take end_ptr and others size_t to indicate
the end of the buffer.
- Some arguments meaning buffer size are called just 's'
- mem_flush() takes void * but immediately converts it to char *
Cleanup the parameters to make things simpler and more consistent:
- Rename start_ptr to simply buf as it's shorter.
- Replace end_ptr and s parameters with buf_size and only calculate
end_ptr in the functions that truly use it.
- Make mem_flush() parameters to follow the same convention as the
other functions in fill_buf.
- convert mem_flush() char * to unsigned char *.
While at it, fix also a typo in a comment.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
fill_buf stores buffer pointer into global variable startptr that is
only used in fill_cache().
Remove startptr as global variable, the local variable in fill_cache()
is enough to keep the pointer.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
run_fill_buf()'s malloc_and_init_memory parameter is always 1. There's
also duplicated memory init code for malloc_and_init_memory == 0 case
in fill_buf() which is unused.
Remove the malloc_and_init_memory parameter and the duplicated mem init
code.
While at it, fix also a typo in run_fill_buf() prototype's argument.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When no benchmark_cmd is given, benchmark_cmd[1] is set to span in
main(). There's no need to do it again in run_mba_test().
Remove the duplicated preparation for span argument into
benchmark_cmd[1] from run_mba_test(). After this, the has_ben and span
arguments to run_mba_test() can be removed.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
MBA and MBM tests to use megabytes to represent span. CMT test uses
bytes. The difference requires run_benchmark() to size the buffer
differently based on the test name, which in turn requires passing the
test name into run_benchmark().
Convert MBA and MBM tests to use span internally in bytes like CMT test
to remove the internal inconsistency between the tests. Remove the test
dependent buffer sizing from run_benchmark().
This change eliminates one of the reasons why the test name has to be
passed around but there are still other users too so the test name
passing cannot yet be removed.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Span is defined either as unsigned long or int.
Consistently use size_t everywhere for span as it refers to size of the
memory block.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Mount/umount of the resctrl FS is now paired nicely per test.
Rename remount_resctrl(bool mum_resctrlfs) to mount_resctrl(). Make
it unconditionally try to mount the resctrl FS and return error if
resctrl FS was mounted already.
While at it, group the mount/umount prototypes in the header.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A few places currently lack umounting resctrl FS on error paths:
- cmt_resctrl_val() has multiple error paths with direct return.
- cat_perf_miss_val() has multiple error paths with direct return.
In addition, validate_resctrl_feature_request() is called by
run_mbm_test() and run_mba_test(). Neither MBA nor MBM test tries to
umount resctrl FS.
Each and every test does require resctrl FS to be present already for
feature check. Thus, it makes sense to just mount it on higher level in
resctrl_tests.c and properly pair it with umount.
Move resctrl FS (re)mount/unmount into each test function in
resctrl_tests.c. Make feature validation to simply check that resctrl
FS is mounted.
As there's the final umount in main() before this change, the selftest
should not leave resctrl FS behind after the tests even if one of the
forementioned paths is taken (thus, no fixes tag).
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resctrl FS mount/remount/umount code is hard to track. Better approach
is to use mount/umount pair for each test but that assumes resctrl FS
is not mounted beforehand.
Change umount_resctrlfs() so that it can unmount resctrl FS from any
path, and enable further simplifications into mount/remount/umount
logic by unmounting resctrl FS at the start if a pre-existing
mountpoint is found.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Perf event fd (fd_lm) is not closed when run_fill_buf() returns error.
Close fd_lm only in cat_val() to make it easier to track it is always
closed.
Fixes: 790bf585b0 ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A child calls PARENT_EXIT() when it fails to run a benchmark to kill
the parent process. PARENT_EXIT() lacks unmount for the resctrl FS and
the parent won't be there to unmount it either after it gets killed.
Add the resctrl FS unmount also to PARENT_EXIT().
Fixes: 591a6e8588 ("selftests/resctrl: Add basic resctrl file system operations and data")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The error path in fill_cache() does return before the allocated buffer
is freed leaking the buffer.
The leak was introduced when fill_cache_read() started to return errors
in commit c7b607fa93 ("selftests/resctrl: Fix null pointer
dereference on open failed"), before that both fill functions always
returned 0.
Move free() earlier to prevent the mem leak.
Fixes: c7b607fa93 ("selftests/resctrl: Fix null pointer dereference on open failed")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Makefile only lists *.c as build dependencies for the resctrl_tests
executable which excludes resctrl.h.
Add *.h to wildcard() to include resctrl.h.
Fixes: 591a6e8588 ("selftests/resctrl: Add basic resctrl file system operations and data")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
An error snuck in between two recent conflicting changes:
Until recently ->setup() used negative values to indicate
normal test termination. This was changed in
commit fa10366cc6 ("selftests/resctrl: Allow ->setup() to return
errors") that transitioned ->setup() to use negative values
to indicate errors and a new END_OF_TESTS to indicate normal
termination.
commit 42e3b093eb ("selftests/resctrl: Fix set up schemata with 100%
allocation on first run in MBM test") continued to use
negative return to indicate normal test termination.
Fix mbm_setup() to use the new END_OF_TESTS to indicate
error-free test termination.
Fixes: 42e3b093eb ("selftests/resctrl: Fix set up schemata with 100% allocation on first run in MBM test")
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/lkml/bb65cce8-54d7-68c5-ef19-3364ec95392a@linux.intel.com/
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Before exiting each test function(run_cmt/cat/mbm/mba_test()),
test results("ok","not ok") are printed by ksft_test_result() and then
temporary result files are cleaned by function
cmt/cat/mbm/mba_test_cleanup().
However, before running ksft_test_result(),
function cmt/cat/mbm/mba_test_cleanup()
has been run in each test function as follows:
cmt_resctrl_val()
cat_perf_miss_val()
mba_schemata_change()
mbm_bw_change()
Remove duplicate codes that clear each test result file,
while ensuring cleanup properly even when errors occur in each test.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
After creating a child process with fork() in CAT test, if a signal such
as SIGINT is received, the parent process will be terminated immediately,
and therefore the child process will not be killed and also resctrlfs is
not unmounted.
There is a signal handler registered in CMT/MBM/MBA tests, which kills
child process, unmount resctrlfs, cleanups result files, etc., if a
signal such as SIGINT is received.
Commonize the signal handler registered for CMT/MBM/MBA tests and
reuse it in CAT.
To reuse the signal handler to kill child process use global bm_pid
instead of local bm_pid.
Also, since the MBA/MBA/CMT/CAT are run in order, unregister the signal
handler at the end of each test so that the signal handler cannot be
inherited by other tests.
Reviewed-by: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
After creating a child process with fork() in CAT test, if an error
occurs when parent process runs cat_val() or check_results(), the child
process will not be killed and also resctrlfs is not unmounted. Also if
an error occurs when child process runs cat_val() or check_results(),
the parent process will wait for the pipe message from the child process
which will never be sent by the child process and the parent process
cannot proceed to unmount resctrlfs.
Synchronize the exits between the parent and child. An error could
occur whether in parent process or child process. The parent process
always kills the child process and runs umount_resctrlfs(). The
child process always waits to be killed by the parent process.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When a process has buffered output, a child process created by fork()
will also copy buffered output. When using kselftest framework,
the output (resctrl test result message) will be printed multiple times.
Add fflush() to flush out the buffered output before executing fork().
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since MBA check result is not returned, the MBA test result message
is always output as "ok" regardless of whether the MBA check result is
true or false.
Make output message to be "not ok" if MBA check result is failed.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There is a comment "Set up shemata with 100% allocation on the first run"
in function mbm_setup(), but there is an increment bug and the condition
"num_of_runs == 0" will never be met and write_schemata() will never be
called to set schemata to 100%. Even if write_schemata() is called in MBM
test, since it is not supported for MBM test it does not set the schemata.
This is currently fine because resctrl_val_parm->mum_resctrlfs is always 1
and umount/mount will be run in each test to set the schemata to 100%.
To support the usage when MBM test does not unmount/remount resctrl
filesystem before the test starts, fix to call write_schemata() and
set schemata properly when the function is called for the first time.
Also, remove static local variable 'num_of_runs' because this is not
needed as there is resctrl_val_param->num_of_runs which should be used
instead like in cat_setup().
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Use ksft_finished() after running tests so that resctrl_tests doesn't
return exit code 0 when tests fail.
Consequently, report the MBA and MBM tests as skipped when running on
non-Intel hardware, otherwise resctrl_tests will exit with a failure
code.
Signed-off-by: Peter Newman <peternewman@google.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
get_llc_perf() function comment refers to cpu_no parameter that does
not exist.
Correct get_llc_perf() the comment to document llc_perf_miss instead.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
remount_resctrlfs() accepts a boolean value as an argument. Some tests
pass 0/1 and some tests pass true/false.
Make all the callers of remount_resctrlfs() use true/false so that the
parameter usage is consistent across tests.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
CBM_MASK_PATH is actually the path to resctrl/info.
Change the macro name to correctly indicate what it represents.
[ ij: Tweaked the changelog. ]
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
initialize_llc_perf() unconditionally returns 0.
initialize_llc_perf() performs only memory initialization, none of
which can fail.
Change the return type from int to void to accurately reflect that its
return value doesn't need to be checked. Remove the error checking from
the only callsite.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
memalign() is obsolete according to its manpage.
Replace memalign() with posix_memalign() and remove malloc.h include
that was there for memalign().
As a pointer is passed into posix_memalign(), initialize *p to NULL
to silence a warning about the function's return value being used as
uninitialized (which is not valid anyway because the error is properly
checked before p is returned).
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
MBA test case writes schemata but it does not check if the write is
successful or not.
Add the error check and return error properly.
Fixes: 01fee6b4d1 ("selftests/resctrl: Add MBA test")
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
resctrl_val() assumes ->setup() always returns either 0 to continue
tests or < 0 in case of the normal termination of tests after x runs.
The latter overlaps with normal error returns.
Define END_OF_TESTS (=1) to differentiate the normal termination of
tests and return errors as negative values. Alter callers of ->setup()
to handle errors properly.
Fixes: 790bf585b0 ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Fixes: ecdbb911f2 ("selftests/resctrl: Add MBM test")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
resctrl_val() function is called only by MBM, MBA, and CMT tests which
means the else branch is never used.
Both test branches call param->setup().
Remove the unused else branch and place the ->setup() call outside of
the test specific branches reducing code duplication.
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
malloc_and_init_memory() in fill_buf isn't checking if memalign()
successfully allocated memory or not before accessing the memory.
Check the return value of memalign() and return NULL if allocating
aligned memory fails.
Fixes: a2561b12fe ("selftests/resctrl: Add built in benchmark")
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently if opening /dev/null fails to open then file pointer fp
is null and further access to fp via fprintf will cause a null
pointer dereference. Fix this by returning a negative error value
when a null fp is detected.
Detected using cppcheck static analysis:
tools/testing/selftests/resctrl/fill_buf.c:124:6: note: Assuming
that condition '!fp' is not redundant
if (!fp)
^
tools/testing/selftests/resctrl/fill_buf.c:126:10: note: Null
pointer dereference
fprintf(fp, "Sum: %d ", ret);
Fixes: a2561b12fe ("selftests/resctrl: Add built in benchmark")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
resctrl_tests can be built or run using kselftests framework.
Add description on how to do so in README.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In kselftest framework, all tests can be build/run at a time,
and a sub test also can be build/run individually. As follows:
$ make kselftest-all TARGETS=resctrl
$ make -C tools/testing/selftests run_tests
$ make -C tools/testing/selftests TARGETS=resctrl run_tests
However, resctrl_tests cannot be run using kselftest framework,
users have to change directory to tools/testing/selftests/resctrl/,
run "make" to build executable file "resctrl_tests",
and run "sudo ./resctrl_tests" to execute the test.
To build/run resctrl_tests using kselftest framework.
Modify tools/testing/selftests/Makefile
and tools/testing/selftests/resctrl/Makefile.
Even after this change, users can still build/run resctrl_tests
without using framework as before.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> # resctrl changes
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In kselftest framework, if a sub test can not run by some reasons,
the test result should be marked as SKIP rather than FAIL.
Return KSFT_SKIP(4) instead of KSFT_FAIL(1) if resctrl_tests is not run
as root or it is run on a test environment which does not support resctrl.
- ksft_exit_fail_msg(): returns KSFT_FAIL(1)
- ksft_exit_skip(): returns KSFT_SKIP(4)
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When testing on a Intel(R) Xeon(R) Gold 6254 CPU @ 3.10GHz the resctrl
selftests fail due to timeout after exceeding the default time limit of
45 seconds. On this system the test takes about 68 seconds.
Since the failing test by default accesses a fixed size of memory, the
execution time should not vary significantly between different environment.
A new default of 120 seconds should be sufficient yet easy to customize
with the introduction of the "settings" file for reference.
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In kselftest framework, a sub test is run using the timeout utility
and it will send SIGTERM to the test upon timeout.
In resctrl_tests, a child process is created by fork() to
run benchmark but SIGTERM is not set in sigaction().
If SIGTERM signal is received, the parent process will be killed,
but the child process still exists.
Kill child process before the parent process terminates
if SIGTERM signal is received.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
According to "Intel Resource Director Technology (Intel RDT) on
2nd Generation Intel Xeon Scalable Processors Reference Manual",
When the Intel Sub-NUMA Clustering(SNC) feature is enabled,
Intel CMT and MBM counters may not be accurate.
However, there does not seem to be an architectural way to detect
if SNC is enabled.
If the result of MBM&CMT test fails on Intel CPU,
print a message to let users know a possible cause of failure.
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, the resctrl_tests only has a function to detect AMD vendor.
Since when the Intel Sub-NUMA Clustering feature is enabled,
Intel CMT and MBM counters may not be accurate,
the resctrl_tests also need a function to detect Intel vendor.
And in the future, resctrl_tests will need a function to detect different
vendors, such as Arm.
Extend the function to detect Intel vendor as well. Also,
this function can be easily extended to detect other vendors.
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resctrl test suite accepts command line argument "-t" to specify the
unit tests to run in the test list (e.g., -t mbm,mba,cmt,cat) as
documented in the help.
When calling strtok() to parse the option, the incorrect delimiters
argument ":\t" is used. As a result, passing "-t mbm,mba,cmt,cat" throws
an invalid option error.
Fix this by using delimiters argument "," instead of ":\t" for parsing
of unit tests list. At the same time, remove the unnecessary "spaces"
between the unit tests in help documentation to prevent confusion.
Fixes: 790bf585b0 ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Fixes: 78941183d1 ("selftests/resctrl: Add Cache QoS Monitoring (CQM) selftest")
Fixes: ecdbb911f2 ("selftests/resctrl: Add MBM test")
Fixes: 034c7678dd ("selftests/resctrl: Add README for resctrl tests")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Change a few printed messages to report test progress more clearly.
Add a missing "\n" at the end of one printed message.
Suggested-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Dan reported following static checker warnings
tools/testing/selftests/resctrl/resctrl_val.c:545 measure_vals()
warn: 'bw_imc' unsigned <= 0
tools/testing/selftests/resctrl/resctrl_val.c:549 measure_vals()
warn: 'bw_resc_end' unsigned <= 0
These warnings are reported because
1. measure_vals() declares 'bw_imc' and 'bw_resc_end' as unsigned long
variables
2. Return value of get_mem_bw_imc() and get_mem_bw_resctrl() are assigned
to 'bw_imc' and 'bw_resc_end' respectively
3. The returned values are checked for <= 0 to see if the calls failed
Checking for < 0 for an unsigned value doesn't make any sense.
Fix this issue by changing the implementation of get_mem_bw_imc() and
get_mem_bw_resctrl() such that they now accept reference to a variable
and set the variable appropriately upon success and return 0, else return
< 0 on error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
iMC (Integrated Memory Controller) counters are usually at
"/sys/bus/event_source/devices/" and are named as "uncore_imc_<n>".
num_of_imcs() function tries to count number of such iMC counters so that
it could appropriately initialize required number of perf_attr structures
that could be used to read these iMC counters.
num_of_imcs() function assumes that all the directories under this path
that start with "uncore_imc" are iMC counters. But, on some systems there
could be directories named as "uncore_imc_free_running" which aren't iMC
counters. Trying to read from such directories will result in "not found
file" errors and MBM/MBA tests will fail.
Hence, fix the logic in num_of_imcs() such that it looks at the first
character after "uncore_imc_" to check if it's a numerical digit or not. If
it's a digit then the directory represents an iMC counter, else, skip the
directory.
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
umount_resctrlfs() directly attempts to unmount resctrl file system without
checking if resctrl FS is already mounted or not. It returns 0 on success
and on failure it prints an error message and returns an error status.
Calling umount_resctrlfs() when resctrl FS isn't mounted will return an
error status.
There could be situations where-in the caller might not know if resctrl
FS is already mounted or not and the caller might still want to unmount
resctrl FS if it's already mounted (For example during teardown).
To support above use cases, change umount_resctrlfs() such that it now
first checks if resctrl FS is already mounted or not and unmounts resctrl
FS only if it's already mounted.
unmount resctrl FS upon exit. For example, running only mba test on a
Broadwell (BDW) machine (MBA isn't supported on BDW CPU).
This happens because validate_resctrl_feature_request() would mount resctrl
FS to check if mba is enabled on the platform or not and finds that the H/W
doesn't support mba and hence will return false to run_mba_test(). This in
turn makes the main() function return without unmounting resctrl FS.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There could be two reasons why a resctrl feature might not be enabled on
the platform
1. H/W might not support the feature
2. Even if the H/W supports it, the user might have disabled the feature
through kernel command line arguments
Hence, any resctrl unit test (like cmt, cat, mbm and mba) before starting
the test will first check if the feature is enabled on the platform or not.
If the feature isn't enabled, then the test returns with an error status.
For example, if MBA isn't supported on a platform and if the user tries to
run MBA, the output will look like this
ok mounting resctrl to "/sys/fs/resctrl"
not ok MBA: schemata change
But, not supporting a feature isn't a test failure. So, instead of treating
it as an error, use the SKIP directive of the TAP protocol. With the
change, the output will look as below
ok MBA # SKIP Hardware does not support MBA or MBA is disabled
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resctrl test suite main() function does the following things
1. Parses command line arguments passed by user
2. Some setup checks
3. Logic that calls into each unit test
4. Print result and clean up after running each unit test
Introduce wrapper functions for steps 3 and 4 to modularize the main()
function. Adding these wrapper functions makes it easier to add any logic
to each individual test.
Please note that this is a preparatory patch for the next one and no
functional changes are intended.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cache related tests (like CAT and CMT) depend on a variable called
no_of_bits to run. no_of_bits defines the number of contiguous bits
that should be set in the CBM mask and a user can pass a value for
no_of_bits using -n command line argument. If a user hasn't passed any
value, it defaults to 5 (randomly chosen value).
Hard coding no_of_bits to 5 will make the cache tests fail to run on
systems that support maximum cbm mask that is less than or equal to 5 bits.
Hence, don't hard code no_of_bits value.
If a user passes a value for "no_of_bits" using -n option, use it.
Otherwise, no_of_bits is equal to half of the maximum number of bits in
the cbm mask.
Please note that CMT test is still hard coded to 5 bits. It will change in
subsequent patches that change CMT test.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
