Build breaks when executing make with run_tests for sub-folders
under powerpc. This is because, CFLAGS and GIT_VERSION macros are
defined in Makefile of toplevel powerpc folder.
make: Entering directory '/home/maddy/linux/tools/testing/selftests/powerpc/mm'
gcc hugetlb_vs_thp_test.c ../harness.c ../utils.c -o /home/maddy/selftest_output//hugetlb_vs_thp_test
hugetlb_vs_thp_test.c:6:10: fatal error: utils.h: No such file or directory
6 | #include "utils.h"
| ^~~~~~~~~
compilation terminated.
Fix this by adding the flags.mk in each sub-folder Makefile. Also remove
the CFLAGS and GIT_VERSION macros from powerpc/ folder Makefile since
the same is definied in flags.mk
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229093711.581230-3-maddy@linux.ibm.com
In some powerpc/ sub-folder Makefiles, CFLAGS are defined before lib.mk
include. Clean it up by re-ordering the flags to follow after the mk
include. This is needed to support sub-folders in powerpc/ buildable on
its own.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240229093711.581230-1-maddy@linux.ibm.com
Use $(KHDR_INCLUDES) as lookup path for kernel headers. This prevents
building against kernel headers from the build environment in scenarios
where kernel headers are installed into a specific output directory
(O=...).
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230127135755.79929-22-mathieu.desnoyers@efficios.com
We recently discovered some of our mitigation patching was not safe
against other CPUs running concurrently.
Add a test which enable/disables all mitigations in a tight loop while
also running some stress load. On an unpatched system this almost always
leads to an oops and panic/reboot, but we also check if the kernel
becomes tainted in case we have a non-fatal oops.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210507064225.1556312-1-mpe@ellerman.id.au
Also based on the RFI and entry flush tests, it counts the L1D misses
by doing a syscall that does user access: uname, in this case.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
[dja: forward port, rename function]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225061949.1213404-1-dja@axtens.net
For simplicity in backporting, the original entry_flush test contained
a lot of duplicated code from the rfi_flush test. De-duplicate that code.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a test modelled on the RFI flush test which counts the number
of L1D misses doing a simple syscall with the entry flush on and off.
For simplicity of backporting, this test duplicates a lot of code from
rfi_flush. We clean that up in the next patch.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The spectre_v2 test must be built 64-bit, it includes hand-written asm
that is 64-bit only, and segfaults if built 32-bit.
Fixes: c790c3d2b0 ("selftests/powerpc: Add a test of spectre_v2 mitigations")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191120023924.13130-1-mpe@ellerman.id.au
This test uses the PMU to count branch prediction hits/misses for a
known loop, and compare the result to the reported spectre v2
mitigation.
This gives us a way of sanity checking that the reported mitigation is
actually in effect.
Sample output for some cases, eg:
Power9:
sysfs reports: 'Vulnerable'
PM_BR_PRED_CCACHE: result 368 running/enabled 5792777124
PM_BR_MPRED_CCACHE: result 319 running/enabled 5792775546
PM_BR_PRED_PCACHE: result 2147483281 running/enabled 5792773128
PM_BR_MPRED_PCACHE: result 213604201 running/enabled 5792771640
Miss percent 9 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
sysfs reports: 'Mitigation: Indirect branch serialisation (kernel only)'
PM_BR_PRED_CCACHE: result 895 running/enabled 5780320920
PM_BR_MPRED_CCACHE: result 822 running/enabled 5780312414
PM_BR_PRED_PCACHE: result 2147482754 running/enabled 5780308836
PM_BR_MPRED_PCACHE: result 213639731 running/enabled 5780307912
Miss percent 9 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
sysfs reports: 'Mitigation: Indirect branch cache disabled'
PM_BR_PRED_CCACHE: result 2147483649 running/enabled 20540186160
PM_BR_MPRED_CCACHE: result 2147483649 running/enabled 20540180056
PM_BR_PRED_PCACHE: result 0 running/enabled 20540176090
PM_BR_MPRED_PCACHE: result 0 running/enabled 20540174182
Miss percent 100 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
Power8:
sysfs reports: 'Vulnerable'
PM_BR_PRED_CCACHE: result 2147483649 running/enabled 3505888142
PM_BR_MPRED_CCACHE: result 9 running/enabled 3505882788
Miss percent 0 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
sysfs reports: 'Mitigation: Indirect branch cache disabled'
PM_BR_PRED_CCACHE: result 2147483649 running/enabled 16931421988
PM_BR_MPRED_CCACHE: result 2147483649 running/enabled 16931416478
Miss percent 100 %
OK - Measured branch prediction rates match reported spectre v2 mitigation.
success: spectre_v2
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190520105520.22274-1-mpe@ellerman.id.au
typing 'make' inside tools/testing/selftests/powerpc gave a build
warning:
BUILD_TARGET=tools/testing/selftests/powerpc/security; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C security all
make[1]: Entering directory 'tools/testing/selftests/powerpc/security'
../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory
make[1]: *** No rule to make target '../../../../scripts/subarch.include'.
make[1]: Failed to remake makefile '../../../../scripts/subarch.include'.
The build is one level deeper than lib.mk thinks it is. Set top_srcdir
to set things straight.
Note that the test program is still built.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds a test to verify proper functioning of the rfi flush
capability implemented to mitigate meltdown. The test works by
measuring the number of L1d cache misses encountered while loading
data from memory. Across a system call, since the L1d cache is flushed
when rfi_flush is enabled, the number of cache misses is expected to
be relative to the number of cachelines corresponding to the data
being loaded.
The current system setting is reflected via powerpc/rfi_flush under
debugfs (assumed to be /sys/kernel/debug/). This test verifies the
expected result with rfi_flush enabled as well as when it is disabled.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Add SPDX tags, clang format, skip if the debugfs is missing, use
__u64 and SANE_USERSPACE_TYPES to avoid printf() build errors.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
