KVM x86 misc changes for 6.12
- Advertise AVX10.1 to userspace (effectively prep work for the "real" AVX10
functionality that is on the horizon).
- Rework common MSR handling code to suppress errors on userspace accesses to
unsupported-but-advertised MSRs. This will allow removing (almost?) all of
KVM's exemptions for userspace access to MSRs that shouldn't exist based on
the vCPU model (the actual cleanup is non-trivial future work).
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC) splits the
64-bit value into the legacy ICR and ICR2 storage, whereas Intel (APICv)
stores the entire 64-bit value a the ICR offset.
- Fix a bug where KVM would fail to exit to userspace if one was triggered by
a fastpath exit handler.
- Add fastpath handling of HLT VM-Exit to expedite re-entering the guest when
there's already a pending wake event at the time of the exit.
- Finally fix the RSM vs. nested VM-Enter WARN by forcing the vCPU out of
guest mode prior to signalling SHUTDOWN (architecturally, the SHUTDOWN is
supposed to hit L1, not L2).
KVK generic changes for 6.12:
- Fix a bug that results in KVM prematurely exiting to userspace for coalesced
MMIO/PIO in many cases, clean up the related code, and add a testcase.
- Fix a bug in kvm_clear_guest() where it would trigger a buffer overflow _if_
the gpa+len crosses a page boundary, which thankfully is guaranteed to not
happen in the current code base. Add WARNs in more helpers that read/write
guest memory to detect similar bugs.
Add a new arch_timer_edge_cases selftests that validates:
* timers above the max TVAL value
* timers in the past
* moving counters ahead and behind pending timers
* reprograming timers
* timers fired multiple times
* masking/unmasking using the timer control mask
These are intentionally unusual scenarios to stress compliance with
the arm architecture.
Co-developed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Link: https://lore.kernel.org/r/20240823175836.2798235-3-coltonlewis@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Break up the asm instructions poking daifclr and daifset to handle
interrupts. R_RBZYL specifies pending interrupts will be handle after
context synchronization events such as an ISB.
Introduce a function wrapper for the WFI instruction.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Link: https://lore.kernel.org/r/20240823175836.2798235-2-coltonlewis@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add a test to verify that KVM correctly exits (or not) when a vCPU's
coalesced I/O ring is full (or isn't). Iterate over all legal starting
points in the ring (with an empty ring), and verify that KVM doesn't exit
until the ring is full.
Opportunistically verify that KVM exits immediately on non-coalesced I/O,
either because the MMIO/PIO region was never registered, or because a
previous region was unregistered.
This is a regression test for a KVM bug where KVM would prematurely exit
due to bad math resulting in a false positive if the first entry in the
ring was before the halfway mark. See commit 92f6d41304 ("KVM: Fix
coalesced_mmio_has_room() to avoid premature userspace exit").
Enable the test for x86, arm64, and risc-v, i.e. all architectures except
s390, which doesn't have MMIO.
On x86, which has both MMIO and PIO, interleave MMIO and PIO into the same
ring, as KVM shouldn't exit until a non-coalesced I/O is encountered,
regardless of whether the ring is filled with MMIO, PIO, or both.
Lastly, wrap the coalesced I/O ring in a structure to prepare for a
potential future where KVM supports multiple ring buffers beyond KVM's
"default" built-in buffer.
Link: https://lore.kernel.org/all/20240820133333.1724191-1-ilstam@amazon.com
Cc: Ilias Stamatis <ilstam@amazon.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240828181446.652474-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove sefltests' kvm_memcmp_hva_gva(), which has literally never had a
single user since it was introduced by commit 783e9e5126 ("kvm:
selftests: add API testing infrastructure").
Link: https://lore.kernel.org/r/20240802200853.336512-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add helpers to allow and expect #GP on x2APIC MSRs, and opportunistically
have the existing helper spit out a more useful error message if an
unexpected exception occurs.
Link: https://lore.kernel.org/r/20240719235107.3023592-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM_CAP_HYPERV_DIRECT_TLBFLUSH is only reported when KVM runs on top of
Hyper-V and hyperv_evmcs/hyperv_svm_test don't need that, these tests check
that the feature is properly emulated for Hyper-V on KVM guests. There's no
corresponding CAP for that, the feature is reported in
KVM_GET_SUPPORTED_HV_CPUID.
Hyper-V specific CPUIDs are not reported by KVM_GET_SUPPORTED_CPUID,
implement dedicated kvm_hv_cpu_has() helper to do the job.
Fixes: 6dac119518 ("KVM: selftests: Make Hyper-V tests explicitly require KVM Hyper-V support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240816130139.286246-3-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since there is 'hyperv.c' for Hyper-V specific functions already, move
Hyper-V specific functions out of processor.c there.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240816130139.286246-2-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add functions to simply print some basic state information in selftests.
The output can be enabled by setting:
#define TH_LOG_ENABLED 1
#define DEBUG 1
* print_psw: current SIE state description and VM run state
* print_hex_bytes: print memory with some counting markers
* print_hex: PRINT_HEX with 512 bytes
* print_run: use print_psw and print_hex to print contents of VM run
state and SIE state description
* print_regs: print content of general and control registers
All prints use pr_debug for the output and can be configured using
DEBUG.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-6-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-6-schlameuss@linux.ibm.com>
Subsequent tests do require direct manipulation of the SIE control
block. This commit introduces the SIE control block definition for use
within the selftests.
There are already definitions of this within the kernel.
This differs in two ways.
* This is the first definition of this in userspace.
* In the context of the selftests this does not require atomicity for
the flags.
With the userspace definition of the SIE block layout now being present
we can reuse the values in other tests where applicable.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-3-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-3-schlameuss@linux.ibm.com>
Multiple test cases need page size and shift definitions.
By moving the definitions to a single architecture specific header we
limit the repetition.
Make use of PAGE_SIZE, PAGE_SHIFT and PAGE_MASK defines in existing
code.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-2-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-2-schlameuss@linux.ibm.com>
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=Cf2R
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.11
- Add a global struct to consolidate tracking of host values, e.g. EFER, and
move "shadow_phys_bits" into the structure as "maxphyaddr".
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC
bus frequency, because TDX.
- Print the name of the APICv/AVIC inhibits in the relevant tracepoint.
- Clean up KVM's handling of vendor specific emulation to consistently act on
"compatible with Intel/AMD", versus checking for a specific vendor.
- Misc cleanups
Test if KVM emulates the APIC bus clock at the expected frequency when
userspace configures the frequency via KVM_CAP_X86_APIC_BUS_CYCLES_NS.
Set APIC timer's initial count to the maximum value and busy wait for 100
msec (largely arbitrary) using the TSC. Read the APIC timer's "current
count" to calculate the actual APIC bus clock frequency based on TSC
frequency.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Co-developed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/2fccf35715b5ba8aec5e5708d86ad7015b8d74e6.1718214999.git.reinette.chatre@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add udelay() for x86 tests to allow busy waiting in the guest for a
specific duration, and to match ARM and RISC-V's udelay() in the hopes
of eventually making udelay() available on all architectures.
Get the guest's TSC frequency using KVM_GET_TSC_KHZ and expose it to all
VMs via a new global, guest_tsc_khz. Assert that KVM_GET_TSC_KHZ returns
a valid frequency, instead of simply skipping tests, which would require
detecting which tests actually need/want udelay(). KVM hasn't returned an
error for KVM_GET_TSC_KHZ since commit cc578287e3 ("KVM: Infrastructure
for software and hardware based TSC rate scaling"), which predates KVM
selftests by 6+ years (KVM_GET_TSC_KHZ itself predates KVM selftest by 7+
years).
Note, if the GUEST_ASSERT() in udelay() somehow fires and the test doesn't
check for guest asserts, then the test will fail with a very cryptic
message. But fixing that, e.g. by automatically handling guest asserts,
is a much larger task, and practically speaking the odds of a test afoul
of this wart are infinitesimally small.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/5aa86285d1c1d7fe1960e3fe490f4b22273977e6.1718214999.git.reinette.chatre@intel.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the max mappable GPA via GuestPhysBits advertised by KVM to calculate
max_gfn. Currently some selftests (e.g. access_tracking_perf_test,
dirty_log_test...) add RAM regions close to max_gfn, so guest may access
GPA beyond its mappable range and cause infinite loop.
Adjust max_gfn in vm_compute_max_gfn() since x86 selftests already
overrides vm_compute_max_gfn() specifically to deal with goofy edge cases.
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240513014003.104593-1-tao1.su@linux.intel.com
[sean: tweak name, add comment and sanity check]
Signed-off-by: Sean Christopherson <seanjc@google.com>
This file was supposed to be removed in commit 2b7deea3ec ("Revert
"kvm: selftests: move base kvm_util.h declarations to kvm_util_base.h""),
but it survived. Remove it now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Define _GNU_SOURCE for all selftests to fix a warning that was introduced by
a change to kselftest_harness.h late in the 6.9 cycle, and because forcing
every test to #define _GNU_SOURCE is painful.
- Provide a global psuedo-RNG instance for all tests, so that library code can
generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes from guest
code on x86, e.g. to help validate KVM's emulation of locked accesses.
- Rename kvm_util_base.h back to kvm_util.h, as the weird layer of indirection
was added purely to avoid manually #including ucall_common.h in a handful of
locations.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception
handlers at VM creation, instead of forcing tests to manually trigger the
related setup.
-----BEGIN PGP SIGNATURE-----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=vsRz
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests_utils-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM selftests treewide updates for 6.10:
- Define _GNU_SOURCE for all selftests to fix a warning that was introduced by
a change to kselftest_harness.h late in the 6.9 cycle, and because forcing
every test to #define _GNU_SOURCE is painful.
- Provide a global psuedo-RNG instance for all tests, so that library code can
generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes from guest
code on x86, e.g. to help validate KVM's emulation of locked accesses.
- Rename kvm_util_base.h back to kvm_util.h, as the weird layer of indirection
was added purely to avoid manually #including ucall_common.h in a handful of
locations.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception
handlers at VM creation, instead of forcing tests to manually trigger the
related setup.
- Enhance the demand paging test to allow for better reporting and stressing
of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing elapsed
time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test to play nice with
running in a minimal userspace environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able to
complete a reasonable number of KVM_RUNs, as the assert can fail on a
completely valid setup. If the test is run on a large-ish system that is
otherwise idle, and the test isn't affined to a low-ish number of CPUs, the
vCPU task can be repeatedly migrated to CPUs that are in deep sleep states,
which results in the vCPU having very little net runtime before the next
migration due to high wakeup latencies.
-----BEGIN PGP SIGNATURE-----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=wAt8
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.10' of https://github.com/kvm-x86/linux into HEAD
KVM selftests cleanups and fixes for 6.10:
- Enhance the demand paging test to allow for better reporting and stressing
of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing elapsed
time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test to play nice with
running in a minimal userspace environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able to
complete a reasonable number of KVM_RUNs, as the assert can fail on a
completely valid setup. If the test is run on a large-ish system that is
otherwise idle, and the test isn't affined to a low-ish number of CPUs, the
vCPU task can be repeatedly migrated to CPUs that are in deep sleep states,
which results in the vCPU having very little net runtime before the next
migration due to high wakeup latencies.
- Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greattly simplified.
- Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmY/PT4ACgkQI9DQutE9
ekNwSA/7BTro0n5gP5/SfSFJeEedigpmHQJtHJk9og0LBzjXZTvYqKpI5J1HnpWE
AFsDf3aDRPaSCvI+S14LkkK+TmGtVEXUg8YGytQo08IcO2x6xBT/YjpkVOHy23kq
SGgNMPNUH2sycb7hTcz9Z/V0vBeYwFzYEAhmpvtROvmaRd8ZIyt+ofcclwUZZAQ2
SolOXR2d+ynCh8ZCOexqyZ67keikW1NXtW5aNWWFc6S6qhmcWdaWJGDcSyHauFac
+YuHjPETJYh7TNpwYTmKclRh1fk/CgA/e+r71Hlgdkg+DGCyVnEZBQxqMi6GTzNC
dzy3qhTtRT61SR54q55yMVIC3o6uRSkht+xNg1Nd+UghiqGKAtoYhvGjduodONW2
1Eas6O+vHipu98HgFnkJRPlnF1HR3VunPDwpzIWIZjK0fIXEfrWqCR3nHFaxShOR
dniTEPfELguxOtbl3jCZ+KHCIXueysczXFlqQjSDkg/P1l0jKBgpkZzMPY2mpP1y
TgjipfSL5gr1GPdbrmh4WznQtn5IYWduKIrdEmSBuru05OmBaCO4geXPUwL4coHd
O8TBnXYBTN/z3lORZMSOj9uK8hgU1UWmnOIkdJ4YBBAL8DSS+O+KtCRkHQP0ghl+
whl0q1SWTu4LtOQzN5CUrhq9Tge11erEt888VyJbBJmv8x6qJjE=
=CEfD
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.10
- Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greattly simplified.
- Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
Initialize the IDT and exception handlers for all non-barebones VMs and
vCPUs on x86. Forcing tests to manually configure the IDT just to save
8KiB of memory is a terrible tradeoff, and also leads to weird tests
(multiple tests have deliberately relied on shutdown to indicate success),
and hard-to-debug failures, e.g. instead of a precise unexpected exception
failure, tests see only shutdown.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that kvm_vm_arch exists, move the GDT, IDT, and TSS fields to x86's
implementation, as the structures are firmly x86-only.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the base types unique to KVM selftests out of kvm_util.h and into a
new header, kvm_util_types.h. This will allow kvm_util_arch.h, i.e. core
arch headers, to reference common types, e.g. vm_vaddr_t and vm_paddr_t.
No functional change intended.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Effectively revert the movement of code from kvm_util.h => kvm_util_base.h,
as the TL;DR of the justification for the move was to avoid #idefs and/or
circular dependencies between what ended up being ucall_common.h and what
was (and now again, is), kvm_util.h.
But avoiding #ifdef and circular includes is trivial: don't do that. The
cost of removing kvm_util_base.h is a few extra includes of ucall_common.h,
but that cost is practically nothing. On the other hand, having a "base"
version of a header that is really just the header itself is confusing,
and makes it weird/hard to choose names for headers that actually are
"base" headers, e.g. to hold core KVM selftests typedefs.
For all intents and purposes, this reverts commit
7d9a662ed9.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Link: https://lore.kernel.org/r/20240314232637.2538648-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Override vcpu_arch_put_guest() to randomly force emulation on supported
accesses. Force emulation of LOCK CMPXCHG as well as a regular MOV to
stress KVM's emulation of atomic accesses, which has a unique path in
KVM's emulator.
Arbitrarily give all the decisions 50/50 odds; absent much, much more
sophisticated infrastructure for generating random numbers, it's highly
unlikely that doing more than a coin flip with affect selftests' ability
to find KVM bugs.
This is effectively a regression test for commit 910c57dfa4 ("KVM: x86:
Mark target gfn of emulated atomic instruction as dirty").
Link: https://lore.kernel.org/r/20240314185459.2439072-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Introduce a macro, vcpu_arch_put_guest(), for "putting" values to memory
from guest code in "interesting" situations, e.g. when writing memory that
is being dirty logged. Structure the macro so that arch code can provide
a custom implementation, e.g. x86 will use the macro to force emulation of
the access.
Use the helper in dirty_log_test, which is of particular interest (see
above), and in xen_shinfo_test, which isn't all that interesting, but
provides a second usage of the macro with a different size operand
(uint8_t versus uint64_t), i.e. to help verify that the macro works for
more than just 64-bit values.
Use "put" as the verb to align with the kernel's {get,put}_user()
terminology.
Link: https://lore.kernel.org/r/20240314185459.2439072-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a global snapshot of kvm_is_forced_emulation_enabled() and sync it to
all VMs by default so that core library code can force emulation, e.g. to
allow for easier testing of the intersections between emulation and other
features in KVM.
Link: https://lore.kernel.org/r/20240314185459.2439072-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move memstress' random bool logic into common code to avoid reinventing
the wheel for basic yes/no decisions. Provide an outer wrapper to handle
the basic/common case of just wanting a 50/50 chance of something
happening.
Link: https://lore.kernel.org/r/20240314185459.2439072-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a global guest_random_state instance, i.e. a pseudo-RNG, so that an
RNG is available for *all* tests. This will allow randomizing behavior
in core library code, e.g. x86 will utilize the pRNG to conditionally
force emulation of writes from within common guest code.
To allow for deterministic runs, and to be compatible with existing tests,
allow tests to override the seed used to initialize the pRNG.
Note, the seed *must* be overwritten before a VM is created in order for
the seed to take effect, though it's perfectly fine for a test to
initialize multiple VMs with different seeds.
And as evidenced by memstress_guest_code(), it's also a-ok to instantiate
more RNGs using the global seed (or a modified version of it). The goal
of the global RNG is purely to ensure that _a_ source of random numbers is
available, it doesn't have to be the _only_ RNG.
Link: https://lore.kernel.org/r/20240314185459.2439072-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Define _GNU_SOURCE is the base CFLAGS instead of relying on selftests to
manually #define _GNU_SOURCE, which is repetitive and error prone. E.g.
kselftest_harness.h requires _GNU_SOURCE for asprintf(), but if a selftest
includes kvm_test_harness.h after stdio.h, the include guards result in
the effective version of stdio.h consumed by kvm_test_harness.h not
defining asprintf():
In file included from x86_64/fix_hypercall_test.c:12:
In file included from include/kvm_test_harness.h:11:
../kselftest_harness.h:1169:2: error: call to undeclared function
'asprintf'; ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
1169 | asprintf(&test_name, "%s%s%s.%s", f->name,
| ^
When including the rseq selftest's "library" code, #undef _GNU_SOURCE so
that rseq.c controls whether or not it wants to build with _GNU_SOURCE.
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240423190308.2883084-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Verify PMU snapshot functionality by setting up the shared memory
correctly and reading the counter values from the shared memory
instead of the CSR.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-23-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
__vcpu_has_ext can check both SBI and ISA extensions when the first
argument is properly converted to SBI/ISA extension IDs. Introduce
two helper functions to make life easier for developers so they
don't have to worry about the conversions.
Replace the current usages as well with new helpers.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-19-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The SBI definitions will continue to grow. Move the sbi related
definitions to its own header file from processor.h
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-18-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The selftests GIC library presently does not support LPIs. Add a
userspace helper for configuring a redistributor for LPIs, installing
an LPI configuration table and LPI pending table.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-18-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
A prerequisite of testing LPI injection performance is of course
instantiating an ITS for the guest. Add a small library for creating an
ITS and interacting with it from the guest.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-17-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
The base registers in the GIC ITS and redistributor for LPIs are 64 bits
wide. Add quadword accessors to poke at them.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-16-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
It would appear that all of the selftests are using the same exact
layout for the GIC frames. Fold this back into the library
implementation to avoid defining magic values all over the selftests.
This is an extension of Colton's change, ripping out parameterization of
from the library internals in addition to the public interfaces.
Co-developed-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-15-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
There are a few subtle incongruencies between the GIC definitions used
by the kernel and selftests. Furthermore, the selftests header blends
implementation detail (e.g. default priority) with the architectural
definitions.
This is all rather annoying, since bulk imports of the kernel header
is not possible. Move selftests-specific definitions out of the
offending header and realign tests on the canonical definitions for
things like sysregs. Finally, haul in a fresh copy of the gicv3 header
to enable a forthcoming ITS selftest.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-14-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Allow the caller to set the initial state of the VM. Doing this
before sev_vm_launch() matters for SEV-ES, since that is the
place where the VMSA is updated and after which the guest state
becomes sealed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-17-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This removes the concept of "subtypes", instead letting the tests use proper
VM types that were recently added. While the sev_init_vm() and sev_es_init_vm()
are still able to operate with the legacy KVM_SEV_INIT and KVM_SEV_ES_INIT
ioctls, this is limited to VMs that are created manually with
vm_create_barebones().
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-15-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At the moment, demand_paging_test does not support profiling/testing
multiple vCPU threads concurrently faulting on a single uffd because
(a) "-u" (run test in userfaultfd mode) creates a uffd for each vCPU's
region, so that each uffd services a single vCPU thread.
(b) "-u -o" (userfaultfd mode + overlapped vCPU memory accesses)
simply doesn't work: the test tries to register the same memory
to multiple uffds, causing an error.
Add support for many vcpus per uffd by
(1) Keeping "-u" behavior unchanged.
(2) Making "-u -a" create a single uffd for all of guest memory.
(3) Making "-u -o" implicitly pass "-a", solving the problem in (b).
In cases (2) and (3) all vCPU threads fault on a single uffd.
With potentially multiple vCPUs per UFFD, it makes sense to allow
configuring the number of reader threads per UFFD as well: add the "-r"
flag to do so.
Signed-off-by: Anish Moorthy <amoorthy@google.com>
Acked-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20240215235405.368539-12-amoorthy@google.com
[sean: fix kernel style violations, use calloc() for arrays]
Signed-off-by: Sean Christopherson <seanjc@google.com>
vs. new) and ultimately neglects to clear PV_UNHALT from vCPUs with HLT-exiting
disabled.
-----BEGIN PGP SIGNATURE-----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=o7dM
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pvunhalt-6.9' of https://github.com/kvm-x86/linux into HEAD
Fix a bug in KVM_SET_CPUID{2,} where KVM looks at the wrong CPUID entries (old
vs. new) and ultimately neglects to clear PV_UNHALT from vCPUs with HLT-exiting
disabled.
- Fix several bugs where KVM speciously prevents the guest from utilizing
fixed counters and architectural event encodings based on whether or not
guest CPUID reports support for the _architectural_ encoding.
- Fix a variety of bugs in KVM's emulation of RDPMC, e.g. for "fast" reads,
priority of VMX interception vs #GP, PMC types in architectural PMUs, etc.
- Add a selftest to verify KVM correctly emulates RDMPC, counter availability,
and a variety of other PMC-related behaviors that depend on guest CPUID,
i.e. are difficult to validate via KVM-Unit-Tests.
- Zero out PMU metadata on AMD if the virtual PMU is disabled to avoid wasting
cycles, e.g. when checking if a PMC event needs to be synthesized when
skipping an instruction.
- Optimize triggering of emulated events, e.g. for "count instructions" events
when skipping an instruction, which yields a ~10% performance improvement in
VM-Exit microbenchmarks when a vPMU is exposed to the guest.
- Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
-----BEGIN PGP SIGNATURE-----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=vayI
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-pmu-6.9' of https://github.com/kvm-x86/linux into HEAD
KVM x86 PMU changes for 6.9:
- Fix several bugs where KVM speciously prevents the guest from utilizing
fixed counters and architectural event encodings based on whether or not
guest CPUID reports support for the _architectural_ encoding.
- Fix a variety of bugs in KVM's emulation of RDPMC, e.g. for "fast" reads,
priority of VMX interception vs #GP, PMC types in architectural PMUs, etc.
- Add a selftest to verify KVM correctly emulates RDMPC, counter availability,
and a variety of other PMC-related behaviors that depend on guest CPUID,
i.e. are difficult to validate via KVM-Unit-Tests.
- Zero out PMU metadata on AMD if the virtual PMU is disabled to avoid wasting
cycles, e.g. when checking if a PMC event needs to be synthesized when
skipping an instruction.
- Optimize triggering of emulated events, e.g. for "count instructions" events
when skipping an instruction, which yields a ~10% performance improvement in
VM-Exit microbenchmarks when a vPMU is exposed to the guest.
- Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
- Add macros to reduce the amount of boilerplate code needed to write "simple"
selftests, and to utilize selftest TAP infrastructure, which is especially
beneficial for KVM selftests with multiple testcases.
- Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
- Fix benign bugs where tests neglect to close() guest_memfd files.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKTobbabEP7vbhhN9OlYIJqCjN/0FAmXrUT8ACgkQOlYIJqCj
N/0azBAAkjVan7STJkDkyoSJAfXbGLFtt1SrSi7886siW+IVIwINyHAdqFbJG8h/
OXSfkQ6Mu4GY27qmuPqAbfVksb6ccAd0SdEDNixtErs2qU4BJvAiNfxxJlfx9b0f
IGhN5mNNcxC4LosEIXZJRI9QPfXsxWkiXvShJ7qQmGXx1/oZGMCTyL6L6Bpqz4PV
PDUAgeQDME1G0uw2AbN5pl9yS1Macl1R5Z0FjXs7pHu/Qy05fn3Afb1UsC4LfcW6
BTUgD4NYamaBOjzgiOzjBZCAL6ee3ZUx+Wy0ohfM2Ewm/MSArPt3SRuIck07bmUu
FRuAKvb0q4Mc6uL9mvxP5t5aowP/2IIb1qR1DakXbXqSIVS4+yQzRhJqaVKdIRuD
KXnxUFXqZ0QOLTgoWRK8fRVwMJWT0kFskNaAmDhcIoWVPxlvGjlXLSYncLIYTeic
qC4Da02p+DSatw+GeONh3Eh2LUfyHuET5Wjb6GVsPr12IAx4KREUWJLShjHtF4FZ
cXncKS6DCT3X5EjoruXgxYYKNoYG0S4ied8G0xE8El/i/O8X8IyeJu6sisdYZF/G
SYpdooF+jnJeMq5eivL+WlaThOVcMpPeNp9fmU3g/TUTn/fIGpBtMf+goZG5jFLz
pzLucXYehpsx28duyEC5SckdVJQ36J5EwZ/ybB35hh6NadMm7LM=
=x6+F
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.9' of https://github.com/kvm-x86/linux into HEAD
KVM selftests changes for 6.9:
- Add macros to reduce the amount of boilerplate code needed to write "simple"
selftests, and to utilize selftest TAP infrastructure, which is especially
beneficial for KVM selftests with multiple testcases.
- Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
- Fix benign bugs where tests neglect to close() guest_memfd files.
KVM_FEATURE_PV_UNHALT is expected to get cleared from KVM PV feature CPUID
data when KVM_X86_DISABLE_EXITS_HLT is enabled. Add the corresponding test
to kvm_pv_test.
Note, the newly added code doesn't actually test KVM_FEATURE_PV_UNHALT and
KVM_X86_DISABLE_EXITS_HLT features.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240228101837.93642-4-vkuznets@redhat.com
[sean: add and use vcpu_cpuid_has()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a KVM selftests to validate the Sstc timer functionality.
The test was ported from arm64 arch timer test.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Move vcpu_has_ext to the processor.c and rename it to __vcpu_has_ext
so that other test cases can use it for vCPU extension check.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add guest_get_vcpuid() helper to simplify accessing to per-cpu
private data. The sscratch CSR was used to store the vcpu id.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add the infrastructure for guest exception handling in riscv selftests.
Customized handlers can be enabled by vm_install_exception_handler(vector)
or vm_install_interrupt_handler().
The code is inspired from that of x86/arm64.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Extend sev_smoke_test to also run a minimal SEV-ES smoke test so that it's
possible to test KVM's unique VMRUN=>#VMEXIT path for SEV-ES guests
without needing a full blown SEV-ES capable VM, which requires a rather
absurd amount of properly configured collateral.
Punt on proper GHCB and ucall support, and instead use the GHCB MSR
protocol to signal test completion. The most important thing at this
point is to have _any_ kind of testing of KVM's __svm_sev_es_vcpu_run().
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Carlos Bilbao <carlos.bilbao@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a library/APIs for creating and interfacing with SEV guests, all of
which need some amount of common functionality, e.g. an open file handle
for the SEV driver (/dev/sev), ioctl() wrappers to pass said file handle
to KVM, tracking of the C-bit, etc.
Add an x86-specific hook to initialize address properties, a.k.a. the
location of the C-bit. An arch specific hook is rather gross, but x86
already has a dedicated #ifdef-protected kvm_get_cpu_address_width() hook,
i.e. the ugliest code already exists.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for tagging and untagging guest physical address, e.g. to
allow x86's SEV and TDX guests to embed shared vs. private information in
the GPA. SEV (encryption, a.k.a. C-bit) and TDX (shared, a.k.a. S-bit)
steal bits from the guest's physical address space that is consumed by the
CPU metadata, i.e. effectively aliases the "real" GPA.
Implement generic "tagging" so that the shared vs. private metadata can be
managed by x86 without bleeding too many details into common code.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Test programs may wish to allocate shared vaddrs for things like
sharing memory with the guest. Since protected vms will have their
memory encrypted by default an interface is needed to explicitly
request shared pages.
Implement this by splitting the common code out from vm_vaddr_alloc()
and introducing a new vm_vaddr_alloc_shared().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for differentiating between protected (a.k.a. private, a.k.a.
encrypted) memory and normal (a.k.a. shared) memory for VMs that support
protected guest memory, e.g. x86's SEV. Provide and manage a common
bitmap for tracking whether a given physical page resides in protected
memory, as support for protected memory isn't x86 specific, i.e. adding a
arch hook would be a net negative now, and in the future.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add sparsebit_for_each_set_range() to allow iterator over a range of set
bits in a range. This will be used by x86 SEV guests to process protected
physical pages (each such page needs to be encrypted _after_ being "added"
to the VM).
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
[sean: split to separate patch]
Link: https://lore.kernel.org/r/20240223004258.3104051-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Make all sparsebit struct pointers "const" where appropriate. This will
allow adding a bitmap to track protected/encrypted physical memory that
tests can access in a read-only fashion.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
[sean: massage changelog]
Link: https://lore.kernel.org/r/20240223004258.3104051-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Carve out space in the @shape passed to the various VM creation helpers to
allow using the shape to control the subtype of VM, e.g. to identify x86's
SEV VMs (which are "regular" VMs as far as KVM is concerned).
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Most tests are currently not giving any proper output for the user
to see how much sub-tests have already been run, or whether new
sub-tests are part of a binary or not. So it would be good to
support TAP output in the KVM selftests. There is already a nice
framework for this in the kselftest_harness.h header which we can
use. But since we also need a vcpu in most KVM selftests, it also
makes sense to introduce our own wrapper around this which takes
care of creating a VM with one vcpu, so we don't have to repeat
this boilerplate in each and every test. Thus let's introduce
a KVM_ONE_VCPU_TEST() macro here which takes care of this.
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/Y2v+B3xxYKJSM%2FfH@google.com/
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-5-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extract the code to set a vCPU's entry point out of vm_arch_vcpu_add() and
into a new API, vcpu_arch_set_entry_point(). Providing a separate API
will allow creating a KVM selftests hardness that can handle tests that
use different entry points for sub-tests, whereas *requiring* the entry
point to be specified at vCPU creation makes it difficult to create a
generic harness, e.g. the boilerplate setup/teardown can't easily create
and destroy the VM and vCPUs.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-4-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Split the arch-neutral test code out of aarch64/arch_timer.c
and put them into a common arch_timer.c. This is a preparation
to share timer test codes in riscv.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
KVM's 'gtod_is_based_on_tsc()' recognizes two clocksources: 'tsc' and
'hyperv_clocksource_tsc_page' and enables kvmclock in 'masterclock'
mode when either is in use. Transform 'sys_clocksource_is_tsc()' into
'sys_clocksource_is_based_on_tsc()' to support the later. This affects
two tests: kvm_clock_test and vmx_nested_tsc_scaling_test, both seem
to work well when system clocksource is 'hyperv_clocksource_tsc_page'.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-4-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Several existing x86 selftests need to check that the underlying system
clocksource is TSC or based on TSC but every test implements its own
check. As a first step towards unification, extract check_clocksource()
from kvm_clock_test and split it into two functions: arch-neutral
'sys_get_cur_clocksource()' and x86-specific 'sys_clocksource_is_tsc()'.
Fix a couple of pre-existing issues in kvm_clock_test: memory leakage in
check_clocksource() and using TEST_ASSERT() instead of TEST_REQUIRE().
The change also makes the test fail when system clocksource can't be read
from sysfs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-2-vkuznets@redhat.com
[sean: eliminate if-elif pattern just to set a bool true]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add helpers for safe and safe-with-forced-emulations versions of RDMSR,
RDPMC, and XGETBV. Use macro shenanigans to eliminate the rather large
amount of boilerplate needed to get values in and out of registers.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-29-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add KVM_ASM_SAFE_FEP() to allow forcing emulation on an instruction that
might fault. Note, KVM skips RIP past the FEP prefix before injecting an
exception, i.e. the fixup needs to be on the instruction itself. Do not
check for FEP support, that is firmly the responsibility of whatever code
wants to use KVM_ASM_SAFE_FEP().
Sadly, chaining variadic arguments that contain commas doesn't work, thus
the unfortunate amount of copy+paste.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-28-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the KVM_FEP definition, a.k.a. the KVM force emulation prefix, into
processor.h so that it can be used for other tests besides the MSR filter
test.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-26-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a helper to detect KVM support for forced emulation by querying the
module param, and use the helper to detect support for the MSR filtering
test instead of throwing a noodle/NOP at KVM to see if it sticks.
Cc: Aaron Lewis <aaronlewis@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-25-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add helpers to read integer module params, which is painfully non-trivial
because the pain of dealing with strings in C is exacerbated by the kernel
inserting a newline.
Don't bother differentiating between int, uint, short, etc. They all fit
in an int, and KVM (thankfully) doesn't have any integer params larger
than an int.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-24-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a helper to probe KVM's "enable_pmu" param, open coding strings in
multiple places is just asking for false negatives and/or runtime errors
due to typos.
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-23-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a PMU library for x86 selftests to help eliminate open-coded event
encodings, and to reduce the amount of copy+paste between PMU selftests.
Use the new common macro definitions in the existing PMU event filter test.
Cc: Aaron Lewis <aaronlewis@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the kvm_x86_pmu_feature framework to allow querying for fixed
counters via {kvm,this}_pmu_has(). Like architectural events, checking
for a fixed counter annoyingly requires checking multiple CPUID fields, as
a fixed counter exists if:
FxCtr[i]_is_supported := ECX[i] || (EDX[4:0] > i);
Note, KVM currently doesn't actually support exposing fixed counters via
the bitmask, but that will hopefully change sooner than later, and Intel's
SDM explicitly "recommends" checking both the number of counters and the
mask.
Rename the intermedate "anti_feature" field to simply 'f' since the fixed
counter bitmask (thankfully) doesn't have reversed polarity like the
architectural events bitmask.
Note, ideally the helpers would use BUILD_BUG_ON() to assert on the
incoming register, but the expected usage in PMU tests can't guarantee the
inputs are compile-time constants.
Opportunistically define macros for all of the known architectural events
and fixed counters.
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the "name" parameter from KVM_X86_PMU_FEATURE(), it's unused and
the name is redundant with the macro, i.e. it's truly useless.
Reviewed-by: Jim Mattson <jmattson@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add vcpu_set_cpuid_property() helper function for setting properties, and
use it instead of open coding an equivalent for MAX_PHY_ADDR. Future vPMU
testcases will also need to stuff various CPUID properties.
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240109230250.424295-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
-----BEGIN PGP SIGNATURE-----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=Q6c+
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.8
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
-----BEGIN PGP SIGNATURE-----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=FeiG
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.8-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.8 part #1
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
With the introduction of steal-time accounting support for
RISC-V KVM we can add RISC-V support to the steal_time test.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add guest_sbi_probe_extension(), allowing guest code to probe for
SBI extensions. As guest_sbi_probe_extension() needs
SBI_ERR_NOT_SUPPORTED, take the opportunity to bring in all SBI
error codes. We don't bring in all current extension IDs or base
extension function IDs though, even though we need one of each,
because we'd prefer to bring those in as necessary.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI extension registers may not be present and indeed when
running on a platform without sscofpmf the PMU SBI extension
is not. Move the SBI extension registers from the base set of
registers to the filter list. Individual configs should test
for any that may or may not be present separately. Since
the PMU extension may disappear and the DBCN extension is only
present in later kernels, separate them from the rest into
their own configs. The rest are lumped together into the same
config.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
While adding RISCV_SBI_EXT_REG(), acknowledge that some registers
have subtypes and extend __kvm_reg_id() to take a subtype field.
Then, update all macros to set the new field appropriately. The
general CSR macro gets renamed to include "GENERAL", but the other
macros, like the new RISCV_SBI_EXT_REG, just use the SINGLE subtype.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Annotate guest printf helpers with __printf() so that the compiler will
warn about incorrect formatting at compile time (see git log for how easy
it is to screw up with the formatting).
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20231129224916.532431-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add yet another macro to the VM/vCPU ioctl() framework to detect when an
ioctl() failed because KVM killed/bugged the VM, i.e. when there was
nothing wrong with the ioctl() itself. If KVM kills a VM, e.g. by way of
a failed KVM_BUG_ON(), all subsequent VM and vCPU ioctl()s will fail with
-EIO, which can be quite misleading and ultimately waste user/developer
time.
Use KVM_CHECK_EXTENSION on KVM_CAP_USER_MEMORY to detect if the VM is
dead and/or bug, as KVM doesn't provide a dedicated ioctl(). Using a
heuristic is obviously less than ideal, but practically speaking the logic
is bulletproof barring a KVM change, and any such change would arguably
break userspace, e.g. if KVM returns something other than -EIO.
Without the detection, tearing down a bugged VM yields a cryptic failure
when deleting memslots:
==== Test Assertion Failure ====
lib/kvm_util.c:689: !ret
pid=45131 tid=45131 errno=5 - Input/output error
1 0x00000000004036c3: __vm_mem_region_delete at kvm_util.c:689
2 0x00000000004042f0: kvm_vm_free at kvm_util.c:724 (discriminator 12)
3 0x0000000000402929: race_sync_regs at sync_regs_test.c:193
4 0x0000000000401cab: main at sync_regs_test.c:334 (discriminator 6)
5 0x0000000000416f13: __libc_start_call_main at libc-start.o:?
6 0x000000000041855f: __libc_start_main_impl at ??:?
7 0x0000000000401d40: _start at ??:?
KVM_SET_USER_MEMORY_REGION failed, rc: -1 errno: 5 (Input/output error)
Which morphs into a more pointed error message with the detection:
==== Test Assertion Failure ====
lib/kvm_util.c:689: false
pid=80347 tid=80347 errno=5 - Input/output error
1 0x00000000004039ab: __vm_mem_region_delete at kvm_util.c:689 (discriminator 5)
2 0x0000000000404660: kvm_vm_free at kvm_util.c:724 (discriminator 12)
3 0x0000000000402ac9: race_sync_regs at sync_regs_test.c:193
4 0x0000000000401cb7: main at sync_regs_test.c:334 (discriminator 6)
5 0x0000000000418263: __libc_start_call_main at libc-start.o:?
6 0x00000000004198af: __libc_start_main_impl at ??:?
7 0x0000000000401d90: _start at ??:?
KVM killed/bugged the VM, check the kernel log for clues
Suggested-by: Michal Luczaj <mhal@rbox.co>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Colton Lewis <coltonlewis@google.com>
Link: https://lore.kernel.org/r/20231108010953.560824-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop _kvm_ioctl(), _vm_ioctl(), and _vcpu_ioctl(), as they are no longer
used by anything other than the no-underscores variants (and may have
never been used directly). The single-underscore variants were never
intended to be a "feature", they were a stopgap of sorts to ease the
conversion to pretty printing ioctl() names when reporting errors.
Opportunistically add a comment explaining when to use __KVM_IOCTL_ERROR()
versus KVM_IOCTL_ERROR(). The single-underscore macros were subtly
ensuring that the name of the ioctl() was printed on error, i.e. it's all
too easy to overlook the fact that using __KVM_IOCTL_ERROR() is
intentional.
Link: https://lore.kernel.org/r/20231108010953.560824-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add support for VM_MODE_P52V48_4K and VM_MODE_P52V48_16K guest modes by
using the FEAT_LPA2 pte format for stage1, when FEAT_LPA2 is available.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231127111737.1897081-13-ryan.roberts@arm.com
We are about to add 52 bit PA guest modes for 4K and 16K pages when the
system supports LPA2. In preparation beef up the logic that parses mmfr0
to also tell us what the maximum supported PA size is for each page
size. Max PA size = 0 implies the page size is not supported at all.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231127111737.1897081-12-ryan.roberts@arm.com
Introduce several new KVM uAPIs to ultimately create a guest-first memory
subsystem within KVM, a.k.a. guest_memfd. Guest-first memory allows KVM
to provide features, enhancements, and optimizations that are kludgly
or outright impossible to implement in a generic memory subsystem.
The core KVM ioctl() for guest_memfd is KVM_CREATE_GUEST_MEMFD, which
similar to the generic memfd_create(), creates an anonymous file and
returns a file descriptor that refers to it. Again like "regular"
memfd files, guest_memfd files live in RAM, have volatile storage,
and are automatically released when the last reference is dropped.
The key differences between memfd files (and every other memory subystem)
is that guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be resized.
guest_memfd files do however support PUNCH_HOLE, which can be used to
convert a guest memory area between the shared and guest-private states.
A second KVM ioctl(), KVM_SET_MEMORY_ATTRIBUTES, allows userspace to
specify attributes for a given page of guest memory. In the long term,
it will likely be extended to allow userspace to specify per-gfn RWX
protections, including allowing memory to be writable in the guest
without it also being writable in host userspace.
The immediate and driving use case for guest_memfd are Confidential
(CoCo) VMs, specifically AMD's SEV-SNP, Intel's TDX, and KVM's own pKVM.
For such use cases, being able to map memory into KVM guests without
requiring said memory to be mapped into the host is a hard requirement.
While SEV+ and TDX prevent untrusted software from reading guest private
data by encrypting guest memory, pKVM provides confidentiality and
integrity *without* relying on memory encryption. In addition, with
SEV-SNP and especially TDX, accessing guest private memory can be fatal
to the host, i.e. KVM must be prevent host userspace from accessing
guest memory irrespective of hardware behavior.
Long term, guest_memfd may be useful for use cases beyond CoCo VMs,
for example hardening userspace against unintentional accesses to guest
memory. As mentioned earlier, KVM's ABI uses userspace VMA protections to
define the allow guest protection (with an exception granted to mapping
guest memory executable), and similarly KVM currently requires the guest
mapping size to be a strict subset of the host userspace mapping size.
Decoupling the mappings sizes would allow userspace to precisely map
only what is needed and with the required permissions, without impacting
guest performance.
A guest-first memory subsystem also provides clearer line of sight to
things like a dedicated memory pool (for slice-of-hardware VMs) and
elimination of "struct page" (for offload setups where userspace _never_
needs to DMA from or into guest memory).
guest_memfd is the result of 3+ years of development and exploration;
taking on memory management responsibilities in KVM was not the first,
second, or even third choice for supporting CoCo VMs. But after many
failed attempts to avoid KVM-specific backing memory, and looking at
where things ended up, it is quite clear that of all approaches tried,
guest_memfd is the simplest, most robust, and most extensible, and the
right thing to do for KVM and the kernel at-large.
The "development cycle" for this version is going to be very short;
ideally, next week I will merge it as is in kvm/next, taking this through
the KVM tree for 6.8 immediately after the end of the merge window.
The series is still based on 6.6 (plus KVM changes for 6.7) so it
will require a small fixup for changes to get_file_rcu() introduced in
6.7 by commit 0ede61d858 ("file: convert to SLAB_TYPESAFE_BY_RCU").
The fixup will be done as part of the merge commit, and most of the text
above will become the commit message for the merge.
Pending post-merge work includes:
- hugepage support
- looking into using the restrictedmem framework for guest memory
- introducing a testing mechanism to poison memory, possibly using
the same memory attributes introduced here
- SNP and TDX support
There are two non-KVM patches buried in the middle of this series:
fs: Rename anon_inode_getfile_secure() and anon_inode_getfd_secure()
mm: Add AS_UNMOVABLE to mark mapping as completely unmovable
The first is small and mostly suggested-by Christian Brauner; the second
a bit less so but it was written by an mm person (Vlastimil Babka).
Expand set_memory_region_test to exercise various positive and negative
testcases for private memory.
- Non-guest_memfd() file descriptor for private memory
- guest_memfd() from different VM
- Overlapping bindings
- Unaligned bindings
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Co-developed-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
[sean: trim the testcases to remove duplicate coverage]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-34-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to invoke KVM_SET_USER_MEMORY_REGION2 directly so that tests
can validate of features that are unique to "version 2" of "set user
memory region", e.g. do negative testing on gmem_fd and gmem_offset.
Provide a raw version as well as an assert-success version to reduce
the amount of boilerplate code need for basic usage.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-33-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add GUEST_SYNC[1-6]() so that tests can pass the maximum amount of
information supported via ucall(), without needing to resort to shared
memory.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-31-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a "vm_shape" structure to encapsulate the selftests-defined "mode",
along with the KVM-defined "type" for use when creating a new VM. "mode"
tracks physical and virtual address properties, as well as the preferred
backing memory type, while "type" corresponds to the VM type.
Taking the VM type will allow adding tests for KVM_CREATE_GUEST_MEMFD
without needing an entirely separate set of helpers. At this time,
guest_memfd is effectively usable only by confidential VM types in the
form of guest private memory, and it's expected that x86 will double down
and require unique VM types for TDX and SNP guests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-30-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers for x86 guests to invoke the KVM_HC_MAP_GPA_RANGE hypercall,
which KVM will forward to userspace and thus can be used by tests to
coordinate private<=>shared conversions between host userspace code and
guest code.
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
[sean: drop shared/private helpers (let tests specify flags)]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-29-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to convert memory between private and shared via KVM's
memory attributes, as well as helpers to free/allocate guest_memfd memory
via fallocate(). Userspace, i.e. tests, is NOT required to do fallocate()
when converting memory, as the attributes are the single source of truth.
Provide allocate() helpers so that tests can mimic a userspace that frees
private memory on conversion, e.g. to prioritize memory usage over
performance.
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-28-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for creating "private" memslots via KVM_CREATE_GUEST_MEMFD and
KVM_SET_USER_MEMORY_REGION2. Make vm_userspace_mem_region_add() a wrapper
to its effective replacement, vm_mem_add(), so that private memslots are
fully opt-in, i.e. don't require update all tests that add memory regions.
Pivot on the KVM_MEM_PRIVATE flag instead of the validity of the "gmem"
file descriptor so that simple tests can let vm_mem_add() do the heavy
lifting of creating the guest memfd, but also allow the caller to pass in
an explicit fd+offset so that fancier tests can do things like back
multiple memslots with a single file. If the caller passes in a fd, dup()
the fd so that (a) __vm_mem_region_delete() can close the fd associated
with the memory region without needing yet another flag, and (b) so that
the caller can safely close its copy of the fd without having to first
destroy memslots.
Co-developed-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-27-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use KVM_SET_USER_MEMORY_REGION2 throughout KVM's selftests library so that
support for guest private memory can be added without needing an entirely
separate set of helpers.
Note, this obviously makes selftests backwards-incompatible with older KVM
versions from this point forward.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-26-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_userspace_memory_region_find(), it's unused and a terrible API
(probably why it's unused). If anything outside of kvm_util.c needs to
get at the memslot, userspace_mem_region_find() can be exposed to give
others full access to all memory region/slot information.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-25-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
* Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
* Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
* Guest support for memory operation instructions (FEAT_MOPS)
* Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
* Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
* Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
* Miscellaneous kernel and selftest fixes
LoongArch:
* New architecture. The hardware uses the same model as x86, s390
and RISC-V, where guest/host mode is orthogonal to supervisor/user
mode. The virtualization extensions are very similar to MIPS,
therefore the code also has some similarities but it's been cleaned
up to avoid some of the historical bogosities that are found in
arch/mips. The kernel emulates MMU, timer and CSR accesses, while
interrupt controllers are only emulated in userspace, at least for
now.
RISC-V:
* Support for the Smstateen and Zicond extensions
* Support for virtualizing senvcfg
* Support for virtualized SBI debug console (DBCN)
S390:
* Nested page table management can be monitored through tracepoints
and statistics
x86:
* Fix incorrect handling of VMX posted interrupt descriptor in KVM_SET_LAPIC,
which could result in a dropped timer IRQ
* Avoid WARN on systems with Intel IPI virtualization
* Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs without
forcing more common use cases to eat the extra memory overhead.
* Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
* Fix a bug where restoring a vCPU snapshot that was taken within 1 second of
creating the original vCPU would cause KVM to try to synchronize the vCPU's
TSC and thus clobber the correct TSC being set by userspace.
* Compute guest wall clock using a single TSC read to avoid generating an
inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads.
* "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain
about a "Firmware Bug" if the bit isn't set for select F/M/S combos.
Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to appease Windows Server
2022.
* Don't apply side effects to Hyper-V's synthetic timer on writes from
userspace to fix an issue where the auto-enable behavior can trigger
spurious interrupts, i.e. do auto-enabling only for guest writes.
* Remove an unnecessary kick of all vCPUs when synchronizing the dirty log
without PML enabled.
* Advertise "support" for non-serializing FS/GS base MSR writes as appropriate.
* Harden the fast page fault path to guard against encountering an invalid
root when walking SPTEs.
* Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
* Use the fast path directly from the timer callback when delivering Xen
timer events, instead of waiting for the next iteration of the run loop.
This was not done so far because previously proposed code had races,
but now care is taken to stop the hrtimer at critical points such as
restarting the timer or saving the timer information for userspace.
* Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future flag.
* Optimize injection of PMU interrupts that are simultaneous with NMIs.
* Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
* Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
* Zap EPT entries when non-coherent DMA assignment stops/start to prevent
using stale entries with the wrong memtype.
* Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y.
This was done as a workaround for virtual machine BIOSes that did not
bother to clear CR0.CD (because ancient KVM/QEMU did not bother to
set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
* Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts SHUTDOWN while
running an SEV-ES guest.
* Clean up the recognition of emulation failures on SEV guests, when KVM would
like to "skip" the instruction but it had already been partially emulated.
This makes it possible to drop a hack that second guessed the (insufficient)
information provided by the emulator, and just do the right thing.
Documentation:
* Various updates and fixes, mostly for x86
* MTRR and PAT fixes and optimizations:
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmVBZc0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP1LQf+NgsmZ1lkGQlKdSdijoQ856w+k0or
l2SV1wUwiEdFPSGK+RTUlHV5Y1ni1dn/CqCVIJZKEI3ZtZ1m9/4HKIRXvbMwFHIH
hx+E4Lnf8YUjsGjKTLd531UKcpphztZavQ6pXLEwazkSkDEra+JIKtooI8uU+9/p
bd/eF1V+13a8CHQf1iNztFJVxqBJbVlnPx4cZDRQQvewskIDGnVDtwbrwCUKGtzD
eNSzhY7si6O2kdQNkuA8xPhg29dYX9XLaCK2K1l8xOUm8WipLdtF86GAKJ5BVuOL
6ek/2QCYjZ7a+coAZNfgSEUi8JmFHEqCo7cnKmWzPJp+2zyXsdudqAhT1g==
=UIxm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its
guest
- Optimization for vSGI injection, opportunistically compressing
MPIDR to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems,
reducing the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
LoongArch:
- New architecture for kvm.
The hardware uses the same model as x86, s390 and RISC-V, where
guest/host mode is orthogonal to supervisor/user mode. The
virtualization extensions are very similar to MIPS, therefore the
code also has some similarities but it's been cleaned up to avoid
some of the historical bogosities that are found in arch/mips. The
kernel emulates MMU, timer and CSR accesses, while interrupt
controllers are only emulated in userspace, at least for now.
RISC-V:
- Support for the Smstateen and Zicond extensions
- Support for virtualizing senvcfg
- Support for virtualized SBI debug console (DBCN)
S390:
- Nested page table management can be monitored through tracepoints
and statistics
x86:
- Fix incorrect handling of VMX posted interrupt descriptor in
KVM_SET_LAPIC, which could result in a dropped timer IRQ
- Avoid WARN on systems with Intel IPI virtualization
- Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
without forcing more common use cases to eat the extra memory
overhead.
- Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
- Fix a bug where restoring a vCPU snapshot that was taken within 1
second of creating the original vCPU would cause KVM to try to
synchronize the vCPU's TSC and thus clobber the correct TSC being
set by userspace.
- Compute guest wall clock using a single TSC read to avoid
generating an inaccurate time, e.g. if the vCPU is preempted
between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
complain about a "Firmware Bug" if the bit isn't set for select
F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
appease Windows Server 2022.
- Don't apply side effects to Hyper-V's synthetic timer on writes
from userspace to fix an issue where the auto-enable behavior can
trigger spurious interrupts, i.e. do auto-enabling only for guest
writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the
dirty log without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as
appropriate.
- Harden the fast page fault path to guard against encountering an
invalid root when walking SPTEs.
- Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
- Use the fast path directly from the timer callback when delivering
Xen timer events, instead of waiting for the next iteration of the
run loop. This was not done so far because previously proposed code
had races, but now care is taken to stop the hrtimer at critical
points such as restarting the timer or saving the timer information
for userspace.
- Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
flag.
- Optimize injection of PMU interrupts that are simultaneous with
NMIs.
- Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
- Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
- Zap EPT entries when non-coherent DMA assignment stops/start to
prevent using stale entries with the wrong memtype.
- Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y
This was done as a workaround for virtual machine BIOSes that did
not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
to set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
SHUTDOWN while running an SEV-ES guest.
- Clean up the recognition of emulation failures on SEV guests, when
KVM would like to "skip" the instruction but it had already been
partially emulated. This makes it possible to drop a hack that
second guessed the (insufficient) information provided by the
emulator, and just do the right thing.
Documentation:
- Various updates and fixes, mostly for x86
- MTRR and PAT fixes and optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: x86: Service NMI requests after PMI requests in VM-Enter path
KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
KVM: arm64: Refine _EL2 system register list that require trap reinjection
arm64: Add missing _EL2 encodings
arm64: Add missing _EL12 encodings
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
...
