Syzbot found a buffer underflow in __hid_request(). Add a related test
case for it.
It's not perfect, but it allows to catch a corner case when a report
descriptor is crafted so that it has a size of 0.
Link: https://patch.msgid.link/20250710-report-size-null-v2-4-ccf922b7c4e5@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
hid-tools 0.10 fixes one inconvenience introduced by
commit 6a9e76f75c ("HID: multitouch: Disable touchpad
on firmware level while not in use")
This change added a new callback when a hid-nultitouch device is opened
or closed to put the underlying device into a given operating mode.
However, in the test cases, that means that while the single threaded
test is run, it opens the device but has to react to the device while
the open() is still running. hid-tools now implements a minimal thread
to circumvent this.
This makes the HID kernel tests in sync with hid-tools 0.10.
This has the net effect of running the full HID python testsuite in 6
minutes instead of 1 hour.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20250709-wip-fix-ci-v1-3-b7df4c271cf8@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Instead of backporting one by one each commits, let's pull them in bulk
and refer to the hid-tools project for a detailed history.
The short summary is:
- make use of dataclass when possible, to avoid tuples
- wacom: remove unused uhdev parameter
- various small fixes not worth mentioning
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20250709-wip-fix-ci-v1-2-b7df4c271cf8@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We aim at syncing with the hid-tools repo on
gitlab.freedesktop.org/libevdev/hid-tools. One of the commits is this
mechanical formatting, so pull it over here so changes are not hidden by
those.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20250709-wip-fix-ci-v1-1-b7df4c271cf8@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
udev-hid-bpf is still not installed everywhere, and we should probably
not assume it is installed automatically.
Link: https://lore.kernel.org/r/20240506143612.148031-1-bentiss@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The only interesting bit is the HAT switch, and we use a BPF program
to fix it. So ensure this works correctly.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-18-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We need to slightly change base_device.py for supporting HID-BPF,
so instead of monkey patching, let's just embed it in the kernel tree.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-16-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
This tablets gets a lot of things wrong:
- the secondary button is reported through Secondary Tip Switch
- the third button is reported through Invert
We need to add some out of proximity intermediate state when moving
back and forth with the eraser mode as it can only be triggered by
physically returning the pen, meaning that the tolerated transitions
can never happen.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-15-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Those tablets don't need special initialization, but are reporting
the events with the wrong usages:
- tip switch is used when the eraser should be used
- eraser is used instead of the secondary barrel switch
Add tests for those so we don't regress in the future.
Currently we set x/y tilt to 0 to not trigger the bpf program
compensate_coordinates_by_tilt()
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-13-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
All the *_WITH*BUTTON states were almost identical except for the
button itself.
I need to add a new device with a third button, and adding a bunch of
states is going to be quite cumbersome.
So convert the `button` parameter of PenState as a boolean, and store
which button is the target as an argument to all functions that need it.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-12-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
few required changes:
- we need to count how many times a udev 'bind' event happens
- we need to tell `udev-hid-bpf` to not automatically attach the
provided HID-BPF objects
- we need to manually attach the ones from the kernel tree, and wait
for the second udev 'bind' event to happen
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-11-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We need to slightly change base_device.py for supporting HID-BPF,
so instead of monkey patching, let's just embed it in the kernel tree.
Link: https://lore.kernel.org/r/20240410-bpf_sources-v1-10-a8bf16033ef8@kernel.org
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Test for proper driver behavior when the touch confidence bit is set
or cleared. Test the three flavors of touch confidence loss (tipswitch
cleared before confidence, tipswitch and confidence cleared at the same
time, and tipswitch only cleared when touch is actually removed). Also
test two flavors of touch confidence gain (confidence added to a touch
that was "never" confident, and confidence added to a touch that was
previously confident).
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
To accommodate for legacy devices, we rely on the last state of a
transition to be valid:
for example when we test PEN_IS_OUT_OF_RANGE to PEN_IS_IN_CONTACT,
any "normal" device that reports an InRange bit would insert a
PEN_IS_IN_RANGE state between the 2.
This is of course valid, but this solution prevents to detect false
releases emitted by some firmware:
when pressing an "eraser mode" button, they might send an extra
PEN_IS_OUT_OF_RANGE that we may want to filter.
So define 2 sets of transitions: one that is the ideal behavior, and
one that is OK, it won't break user space, but we have serious doubts
if we are doing the right thing. And depending on the test, either
ask only for valid transitions, or tolerate weird ones.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-13-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Some tablets report 2 barrel switches. We better test those too.
Use the same transistions description from the primary button tests.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-12-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We get more descriptive in what we are doing, and also get more
information of what is actually being tested. Instead of having a non
exhaustive button changes that are semi-randomly done, we can describe
all the states we want to test.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-11-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Turns out that there are transitions that are unlikely to happen:
for example, having both the tip switch and a button being changed
at the same time (in the same report) would require either a very talented
and precise user or a very bad hardware with a very low sampling rate.
So instead of manually building the button test by hand and forgetting
about some cases, let's reuse the state machine and transitions we have.
This patch only adds the states and the valid transitions. The actual
tests will be replaced later.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-10-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We can easily subclass PenDigitizer for introducing firmware bugs when
subclassing Pen is harder.
Move move_to from Pen to PenDigitizer so we get that ability
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-6-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Those transitions have nothing to do with `Pen`, so migrate them to
`PenState`.
The hidden agenda is to remove `Pen` and integrate it into `PenDigitizer`
so that we can tweak the events in each state to emulate firmware bugs.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-5-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Adding a wacom touch device to use the test_multitouch tests.
Adding a 2 additional tests.
- A test to check if a touch event is sent when the contact_id of the event is 0.
- A test to check if a touch event is not sent when confidence is set to 0.
Signed-off-by: Joshua Dickens <joshua.dickens@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These tests have been developed in the hid-tools[0] tree for a while.
Now that we have a proper selftests/hid kernel entry and that the tests
are more reliable, it is time to directly include those in the kernel
tree.
This one gets skipped when run by vmtest.sh as we currently need to test
against actual kernel modules (.ko), not built-in to fetch the list
of supported devices.
[0] https://gitlab.freedesktop.org/libevdev/hid-tools
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
These tests have been developed in the hid-tools[0] tree for a while.
Now that we have a proper selftests/hid kernel entry and that the tests
are more reliable, it is time to directly include those in the kernel
tree.
The code is taken from [1] to fix a change in v6.3.
[0] https://gitlab.freedesktop.org/libevdev/hid-tools
Link: https://gitlab.freedesktop.org/libevdev/hid-tools/-/merge_requests/143 [1]
Cc: Roderick Colenbrander <roderick.colenbrander@sony.com>
Cc: Jose Torreguitar <jtguitar@google.com>
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
These tests have been developed in the hid-tools[0] tree for a while.
Now that we have a proper selftests/hid kernel entry and that the tests
are more reliable, it is time to directly include those in the kernel
tree.
[0] https://gitlab.freedesktop.org/libevdev/hid-tools
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
These tests have been developed in the hid-tools[0] tree for a while.
Now that we have a proper selftests/hid kernel entry and that the tests
are more reliable, it is time to directly include those in the kernel
tree.
[0] https://gitlab.freedesktop.org/libevdev/hid-tools
Cc: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
These tests have been developed in the hid-tools[0] tree for a while.
Now that we have a proper selftests/hid kernel entry and that the tests
are more reliable, it is time to directly include those in the kernel
tree.
[0] https://gitlab.freedesktop.org/libevdev/hid-tools
Cc: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
These tests have been developed in the hid-tools[0] tree for a while.
Now that we have a proper selftests/hid kernel entry and that the tests
are more reliable, it is time to directly include those in the kernel
tree.
There are a lot of multitouch tests, and the default timeout of 45 seconds
is not big enough. Bump it to 200 seconds.
[0] https://gitlab.freedesktop.org/libevdev/hid-tools
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Roderick Colenbrander <roderick.colenbrander@sony.com>
Cc: наб <nabijaczleweli@nabijaczleweli.xyz>
Cc: Blaž Hrastnik <blaz@mxxn.io>
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
These tests have been developed in the hid-tools[0] tree for a while.
Now that we have a proper selftests/hid kernel entry and that the tests
are more reliable, it is time to directly include those in the kernel
tree.
[0] https://gitlab.freedesktop.org/libevdev/hid-tools
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
These tests have been developed in the hid-tools[0] tree for a while.
Now that we have a proper selftests/hid kernel entry and that the tests
are more reliable, it is time to directly include those in the kernel
tree.
[0] https://gitlab.freedesktop.org/libevdev/hid-tools
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
These tests have been developed in the hid-tools[0] tree for a while.
Now that we have a proper selftests/hid kernel entry and that the tests
are more reliable, it is time to directly include those in the kernel
tree.
[0] https://gitlab.freedesktop.org/libevdev/hid-tools
Cc: Candle Sun <candle.sun@unisoc.com>
Cc: Jose Torreguitar <jtguitar@google.com>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Cc: Roderick Colenbrander <roderick.colenbrander@sony.com>
Cc: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
These tests have been developed in the hid-tools[0] tree for a while.
Now that we have a proper selftests/hid kernel entry and that the tests
are more reliable, it is time to directly include those in the kernel
tree.
I haven't imported all of hid-tools, the python module, but only the
tests related to the kernel. We can rely on pip to fetch the latest
hid-tools release, and then run the tests directly from the tree.
This should now be easier to request tests when something is not behaving
properly in the HID subsystem.
[0] https://gitlab.freedesktop.org/libevdev/hid-tools
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
