A compile_commands.json file is used by the LSP in tools like VSCode and
Neovim to look up function and type information. The file is specific to
the state of the current system; add it to the gitignore.
Note: the kernel root's gitignore has a similar entry:
/compile_commands.json
I am not sure why they use '/' for a file as it is used for directories.
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Allow overriding the cross-comple env parameters to make it
easier for Yocto users. Then cross-compiler toolchains to build
cpupower with only two steps:
- source (toolchain path)/environment-setup-armv8a-poky-linux
- make
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Print out the config file path when fopen failed. It will be easy
for users to know where to create the file.
Since we are here, use strerror to drop the usage of perror.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The 'cpupower-set' tool has been enhanced with new features:
commit f2ab555711 ("cpupower: Add EPP value change support")
commit df8776b036 ("cpupower: Add support for amd_pstate mode change")
commit eb426fc6bd ("cpupower: Add turbo-boost support in cpupower")
However, the corresponding manpage was never updated.
Add a basic description of these new options to the existing manpage.
Commit description updated to fix checkpatch errors: Shuah Khan
Signed-off-by: Tor Vic <torvic9@mailbox.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This cpupower fixes update consists fix to raw_pylibcpupower.i being
removed by "make mrproper". "*.i", "*.o" files are generated during
kernel compile and removed when the repo is cleaned by mrproper.
The file is renamed to use .swg extension instead to avoid the problem.
The second patch removes references to raw_pylibcpupower.i from .gitignore.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmbxyG0ACgkQCwJExA0N
Qxxf4RAAt7Ow3RePcze5fBsl2GkIGDw3rWGxmr0Qbh/YesD/o/eOtykqe4RobqqX
v1VSwbdJEquD4Ll4i3i4np/82zWK9YOAWRcXt9x8HfecfSFhMY0M76+wghhS+zWK
b0V+y4xiELcmaZGiBaHwfbazHmpwpYHukzZSjK/ll0u1umCIPPVSvVtI7240IQ4b
MAI3K/wIvHyQgnkVaqdVzqhRxitIwXuy2hw0aNzwJ66FM7EwvuBDazKhPQU355hH
6eD0GRs7ffcLdG9cLeKd/BewIv7Fc6pkgUZ5JYmmehYGZUPvhvAgoxqwD0FOs99s
bt5YWrIBx45psR8PJiVtL3ZJPNqNQt9LRsHD0ANKGk+yMZoKoeEUP367hGy48ZPi
1HdMnn9aMVm/mP7wuL9nre8rV+NFooFC/hkwyBeWIQMSFI9m4KY8ifDc7Dl+r4N2
5oX+4QKoXoNQEiPN4Ap11dhUqaxFunjcN1zjMCE63cLLzfFBIDRypAnpuypbajca
DQZz4dcxSoNBxl0ylwiqyYfAfUoPfffT2np+ZawnBGtwGFf8gKnCuEeMjwXJg0Ym
Cgp4mjp+xyQgwOVS0HSQ3jGrTLfLJeSUxMugc+6Mao6v8U6cMSUxNA8Le6iBHjrA
YQFXCj1qeoD/M7LhMIseBsACmd4JwVZgoO3V+eS45LICxEgHYPY=
=cwcN
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower updates from Shuah Khan
"The 'raw_pylibcpupower.i' file was being removed by "make mrproper".
That was because '*.i', '.s' and '*.o' files are generated during
kernel compile and removed when the repo is cleaned by mrproper.
Rename it to use .swg extension instead to avoid the problem.
A second patch removes references to it from .gitignore"
* tag 'linux-cpupower-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
pm: cpupower: Clean up bindings gitignore
pm: cpupower: rename raw_pylibcpupower.i
Add SPDX identifier to the gitignore. Remove the comment and .i file
since the file it references was removed in another patch. This patch
depends on Min-Hua Chen's 'pm: cpupower: rename raw_pylibcpupower.i'.
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The raw_pylibcpupower.i is removed unexpectedly after 'make mrproper'
We can reproduce the error by performing the following steps:
cd linux-next
make mrproper
cd tools/power/cpupower/bindings/python
make
We will get an error message:
make: *** No rule to make target 'raw_pylibcpupower.i', needed by 'raw_pylibcpupower_wrap.c'. Stop.
The root cause:
The *.i files are already used for pre-processor output files and
the kernel removes all the *.i files by 'make mrproper'.
That explains why the raw_pylibcpupower.i is removed by 'make mrproper'.
To fix it, Follow John's suggestion to rename raw_pylibcpupower.i to
raw_pylibcpupower.swg.
See:
https://www.swig.org/Doc4.2/SWIG.html
Reviewed-by: John B. Wyatt IV <jwyatt@redhat.com>
Reviewed-by: John B. Wyatt IV <sageofredondo@gmail.com>
Tested-by: John B. Wyatt IV <jwyatt@redhat.com>
Tested-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This cpupower second update for Linux 6.12-rc1 consists of a fix
and a new feature.
-- adds missing powercap_set_enabled() stub function
-- adds SWIG bindings files for libcpupower
SWIG is a tool packaged in Fedora and other distros that can generate
bindings from C and C++ code for several languages including Python,
Perl, and Go.
These bindings allows users to easily write scripts that use and extend
libcpupower's functionality. Currently, only Python is provided in the
makefile, but additional languages may be added if there is demand.
Note that while SWIG itself is GPL v3+ licensed; the resulting output,
the bindings code, is permissively licensed + the license of the .o
files. Please see the following for more details.
- https://swig.org/legal.html.
- https://lore.kernel.org/linux-pm/Zqv9BOjxLAgyNP5B@hatbackup
-----BEGIN PGP SIGNATURE-----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=1xxI
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.12-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge the second round of cpupower utility updates for 6.12-rc1 from
Shuah Khan:
"This cpupower second update for Linux 6.12-rc1 consists of a fix
and a new feature.
-- adds missing powercap_set_enabled() stub function
-- adds SWIG bindings files for libcpupower
SWIG is a tool packaged in Fedora and other distros that can generate
bindings from C and C++ code for several languages including Python,
Perl, and Go.
These bindings allows users to easily write scripts that use and extend
libcpupower's functionality. Currently, only Python is provided in the
makefile, but additional languages may be added if there is demand.
Note that while SWIG itself is GPL v3+ licensed; the resulting output,
the bindings code, is permissively licensed + the license of the .o
files. Please see the following for more details.
- https://swig.org/legal.html.
- https://lore.kernel.org/linux-pm/Zqv9BOjxLAgyNP5B@hatbackup"
* tag 'linux-cpupower-6.12-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
pm:cpupower: Add error warning when SWIG is not installed
MAINTAINERS: Add Maintainers for SWIG Python bindings
pm:cpupower: Include test_raw_pylibcpupower.py
pm:cpupower: Add SWIG bindings files for libcpupower
pm:cpupower: Add missing powercap_set_enabled() stub function
Add error message to better explain to the user when SWIG and
python-config is missing from the path. Makefile was cleaned up
and unneeded elements were removed.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This script demonstrates how to make use of, and tests, the bindings.
In the future, this script could become part of a larger test suite to
test the bindings and libcpupower.
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
SWIG is a tool packaged in Fedora and other distros that can generate
bindings from C and C++ code for several languages including Python,
Perl, and Go.
These bindings allows users to easily write scripts that use and extend
libcpupower's functionality. Currently, only Python is provided in the
makefile, but additional languages may be added if there is demand.
Added suggestions from Shuah Khan for the README and license discussion.
Note that while SWIG itself is GPL v3+ licensed; the resulting output,
the bindings code, is permissively licensed + the license of the .o
files. Please see
https://swig.org/legal.html and [1] for more details.
[1]
https://lore.kernel.org/linux-pm/Zqv9BOjxLAgyNP5B@hatbackup/
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There was a symbol listed in the powercap.h file that was not implemented.
Implement it with a stub return of 0.
Programs like SWIG require that functions that are defined in the
headers be implemented.
Fixes: c2294c1496 ("cpupower: Introduce powercap intel-rapl library and powercap-info command")
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This cpupower update for Linux 6.12-rc1 consists of an enhancement
to cpuidle tool to display the residency value of cpuidle states.
This addition provides a clearer and more detailed view of idle
state information when using cpuidle-info.
-----BEGIN PGP SIGNATURE-----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=fcIj
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge a cpupower utility update for 6.12 from Shuah Khan:
"This cpupower update for Linux 6.12-rc1 consists of an enhancement
to cpuidle tool to display the residency value of cpuidle states.
This addition provides a clearer and more detailed view of idle
state information when using cpuidle-info."
* tag 'linux-cpupower-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
tools/cpupower: display residency value in idle-info
- Standardize directory variables to support more flexible installations.
- Add copyright and licensing information to the Makefile.
- Introduce ".PHONY" declarations to ensure that specific targets are always
executed, regardless of the presence of files with matching names.
- Add a help target to provide usage instructions.
Signed-off-by: Amit Vadhavana <av2082000@gmail.com>
Acked-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Link: https://patch.msgid.link/Update directory handling and installation process in Makefile
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
By default, sleepgraph.py creates suspend-{date}-{time} directories
to store artifacts, or suspend-{date}-{time}-xN if the --multi option
is used.
Ignore those directories by adding a .gitignore file.
Signed-off-by: Yo-Jung (Leo) Lin <0xff07@gmail.com>
Acked-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Link: https://patch.msgid.link/20240825095353.7578-1-0xff07@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enable turbostat extensions to add both perf and PMT
(Intel Platform Monitoring Technology) counters via the cmdline.
Demonstrate PMT access with built-in support for Meteor Lake's Die%c6 counter.
-----BEGIN PGP SIGNATURE-----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=wsSy
-----END PGP SIGNATURE-----
Merge tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Enable turbostat extensions to add both perf and PMT (Intel
Platform Monitoring Technology) counters via the cmdline
- Demonstrate PMT access with built-in support for Meteor Lake's
Die C6 counter
* tag 'v6.11-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2024.07.26
tools/power turbostat: Include umask=%x in perf counter's config
tools/power turbostat: Document PMT in turbostat.8
tools/power turbostat: Add MTL's PMT DC6 builtin counter
tools/power turbostat: Add early support for PMT counters
tools/power turbostat: Add selftests for added perf counters
tools/power turbostat: Add selftests for SMI, APERF and MPERF counters
tools/power turbostat: Move verbose counter messages to level 2
tools/power turbostat: Move debug prints from stdout to stderr
tools/power turbostat: Fix typo in turbostat.8
tools/power turbostat: Add perf added counter example to turbostat.8
tools/power turbostat: Fix formatting in turbostat.8
tools/power turbostat: Extend --add option with perf counters
tools/power turbostat: Group SMI counter with APERF and MPERF
tools/power turbostat: Add ZERO_ARRAY for zero initializing builtin array
tools/power turbostat: Replace enum rapl_source and cstate_source with counter_source
tools/power turbostat: Remove anonymous union from rapl_counter_info_t
tools/power/turbostat: Switch to new Intel CPU model defines
Release 2024.07.26:
Enable turbostat extensions to add both perf and PMT
(Intel Platform Monitoring Technology) counters from the cmdline.
Demonstrate PMT access with built-in support for Meteor Lake's Die%c6 counter.
This commit:
Clean up white-space nits introduced since version 2024.05.10
Signed-off-by: Len Brown <len.brown@intel.com>
Some counters, like cpu/cache-misses/, expose and require umask=%x
parameter alongside event=%x in the sysfs perf counter's event file.
This change make sure we parse and use it when opening user added
counters.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add a general description of the user interface for adding PMT
counters with the new --add pmt,... option.
Provide a complete example for requesting two counters.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Provide a definition for metadata that allows reading DC6 residency
counter via PMT and exposes it as a builtin counter.
Note that this residency counter is updated and read via
entirely different mechanisms vs the MSR-based residency counters.
On MTL processors, there are times when Die%c6 will report above 100%.
This is still useful, but don't expect 3 digits of precision...
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Allows users to read Intel PMT (Platform Monitoring Technology)
counters, providing interface similar to one used to add MSR and perf
counters. Because PMT is exposed as a raw MMIO range, without metadata,
user has to supply the necessary information to find and correctly
display the requested counter.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Printing information about the source and value during initialization and
reading of the counter for each cpu, while useful when debugging,
results in too verbose output.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This leaves the stdout cleaner, having only counter data. It makes it
easier for programs to parse the output of turbostat, for example
selftests.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Highlights:
- amd/pmf: Report system state changes using existing input
events
- asus-wmi: Zenbook 2023 camera LED disable support and fix
TUF laptop keyboard RGB LED sysfs interface
- dell-pc: Fan modes / platform profile support
- hp-wmi: Fix platform profile switching on Omen/Victus
laptops
- intel/ISST: Use only TPMI interface when TPMI and legacy
interfaces are available
- intel/pmc: LTR restore support to pair with LTR ignore
- intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit
CPU numbering mapping support
- WMI: driver override support and docs improvements
- lenovo-yoga-c630: Support for EC (platform/arm64)
- platform/arm64: Fix build with COMPILE_TEST (broke after addition
of C630)
- tools: Intel Speed Select Turbo Ratio Limit fix
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
amd/pmf:
- Remove update system state document
- Use existing input event codes to update system states
- Use memdup_user()
arm64:
- add Lenovo Yoga C630 WOS EC driver
- build drivers even on non-ARM64 platforms
- EC_ACER_ASPIRE1 should depend on ARCH_QCOM
- EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM
arm64: lenovo-yoga-c630:
- select AUXILIARY_BUS
asus-tf103c-dock:
- Use 2-argument strscpy()
asus-wmi:
- fix TUF laptop RGB variant
- support the disable camera LED on F10 of Zenbook 2023
dell-pc:
- avoid double free and invalid unregistration
- Implement platform_profile
dell-smbios:
- Add helper for checking supported class
- Move request functions for reuse
Docs/admin-guide:
- Remove pmf leftover reference from the index
doc: TPMI:
- Add entry for Performance Limit Reasons
dt-bindings: platform:
- Add Lenovo Yoga C630 EC
hp: hp-bioscfg:
- Use 2-argument strscpy()
hp-wmi:
- Fix implementation of the platform_profile_omen_get function
- Fix platform profile option switch bug on Omen and Victus laptops
ideapad-laptop:
- use cleanup.h
intel: chtwc_int33fe:
- Use 2-argument strscpy()
intel/ifs:
- Switch to new Intel CPU model defines
intel_ips:
- Switch to new Intel CPU model defines
intel/pmc:
- Add support to show ltr_ignore value
- Add support to undo ltr_ignore
- Convert index variables to be unsigned
- Move pmc assignment closer to first usage
- Remove unneeded min_t check
- Simplify mutex usage with cleanup helpers
- Switch to new Intel CPU model defines
- Use DEFINE_SHOW_STORE_ATTRIBUTE macro
- Use the Elvis operator
- Use the return value of pmc_core_send_msg
intel_scu_wdt:
- Switch to new Intel CPU model defines
intel_speed_select_if:
- Switch to new Intel CPU model defines
intel_telemetry:
- Switch to new Intel CPU model defines
intel/tpmi:
- Add API to get debugfs root
- Add new auxiliary driver for performance limits
- Add support for performance limit reasons
intel:
- TPMI domain id and CPU mapping
intel/tpmi/plr:
- Add support for the plr mailbox
- Fix output in plr_print_bits()
intel_turbo_max_3:
- Switch to new Intel CPU model defines
intel-uncore-freq:
- Get rid of magic min_max argument
- Get rid of magic values
- Get rid of uncore_read_freq driver API
- Re-arrange bit masks
- Rename the sysfs helper macro names
- Switch to new Intel CPU model defines
- Use generic helpers for current frequency
- Use uncore_index with read_control_freq
ISST:
- Add model specific loading for common module
- Avoid some SkyLake server models
- Use only TPMI interface when present
p2sb:
- Switch to new Intel CPU model defines
serial-multi-instantiate:
- Use 2-argument strscpy()
think-lmi:
- Use 2-argument strscpy()
thinkpad_acpi:
- Use 2-argument strscpy()
tools/power/x86/intel-speed-select:
- Set TRL MSR in 100 MHz units
- v1.20 release
wmi:
- Add bus ABI documentation
- Add driver_override support
x86/platform/atom:
- Switch to new Intel CPU model defines
Merges:
- Merge branch 'pdx86/platform-drivers-x86-lenovo-c630' into review-ilpo
- Merge branch 'pdx86/platform-drivers-x86-lenovo-c630' into review-ilpo
- Merge branch 'pdx86/platform-drivers-x86-lenovo-c630' into review-ilpo
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-ilpo
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZpZIdQAKCRBZrE9hU+XO
MbIEAQCMVjDuOJSSuS2u7/iVb41Q3+kjP6X0CmSpf8dmt3rH0gD/Z9Qynw6ArRY4
PPHY25ur8kPtwtyxHfCMcar6ESpztwU=
=L2LD
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf: Report system state changes using existing input events
- asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop
keyboard RGB LED sysfs interface
- dell-pc: Fan modes / platform profile support
- hp-wmi: Fix platform profile switching on Omen/Victus laptops
- intel/ISST: Use only TPMI interface when TPMI and legacy interfaces
are available
- intel/pmc: LTR restore support to pair with LTR ignore
- intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU
numbering mapping support
- WMI: driver override support and docs improvements
- lenovo-yoga-c630: Support for EC (platform/arm64)
- platform/arm64: Fix build with COMPILE_TEST (broke after addition of
C630)
- tools: Intel Speed Select Turbo Ratio Limit fix
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
platform/x86: asus-wmi: fix TUF laptop RGB variant
platform/x86/intel/tpmi/plr: Fix output in plr_print_bits()
Docs/admin-guide: Remove pmf leftover reference from the index
platform/x86: ideapad-laptop: use cleanup.h
platform/x86: hp-wmi: Fix implementation of the platform_profile_omen_get function
platform: arm64: EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM
platform: arm64: EC_ACER_ASPIRE1 should depend on ARCH_QCOM
platform/x86/amd/pmf: Remove update system state document
platform/x86/amd/pmf: Use existing input event codes to update system states
platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops
platform/x86:intel/pmc: Add support to undo ltr_ignore
platform/x86:intel/pmc: Use the Elvis operator
platform/x86:intel/pmc: Use DEFINE_SHOW_STORE_ATTRIBUTE macro
platform/x86:intel/pmc: Remove unneeded min_t check
platform/x86:intel/pmc: Add support to show ltr_ignore value
platform/x86:intel/pmc: Move pmc assignment closer to first usage
platform/x86:intel/pmc: Convert index variables to be unsigned
platform/x86:intel/pmc: Simplify mutex usage with cleanup helpers
platform/x86:intel/pmc: Use the return value of pmc_core_send_msg
tools/power/x86/intel-speed-select: v1.20 release
...
Merge OPP (operating performance points) and tooling updates for
6.11-rc1:
- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar).
- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson).
- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt).
- Address several assorted issues in the cpupower utility (Roman
Storozhenko).
* pm-opp:
OPP: Introduce an OF helper function to inform if required-opps is used
OPP: Drop a redundant in-parameter to _set_opp_level()
OPP: Fix missing cleanup on error in _opp_attach_genpd()
* pm-tools:
cpupower: fix lib default installation path
cpupower: Disable direct build of the 'bench' subproject
cpupower: Change the var type of the 'monitor' subcommand display mode
cpupower: Remove absent 'v' parameter from monitor man page
cpupower: Improve cpupower build process description
cpupower: Add 'help' target to the main Makefile
cpupower: Replace a dead reference link with working ones
pm-graph: v5.12, code revamp for python3.12
pm-graph: v5.12, fixes
"After" was missing an "r", nothing to see here.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
We had few lines about the feature, but without any complete examples.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
We had an extra "+" at the beginning of some lines that look like a
poorly formated patch.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
User can now read perf counters using "--add perf/<device>/<event>".
Other details work similarly to how --add works with MSRs.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
These three counters now are treated similar to other perf counters
groups. This simplifies and gets rid of a lot of special cases for APERF
and MPERF.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This cpupower second update for Linux 6.11-rc1 consists of
-- fix to install cpupower library in standard librray intall
location - /usr/lib
-- disable direct build of cpupower bench as it can only be
built from the cpupower main makefile.
-----BEGIN PGP SIGNATURE-----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=WIv4
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.11-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux into pm-tools
Merge more cpupower utility changes for 6.11-rc1 from Shuah Khan:
"This cpupower second update for Linux 6.11-rc1 consists of
-- fix to install cpupower library in standard librray intall
location - /usr/lib
-- disable direct build of cpupower bench as it can only be
built from the cpupower main makefile."
* tag 'linux-cpupower-6.11-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: fix lib default installation path
cpupower: Disable direct build of the 'bench' subproject
This version addresses one issue:
- Fix updating TRL MSR after SST-TF is disabled in auto mode.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When SST-TF is disabled in auto mode, the performance is getting
limited.
This is caused by wrong programming of Turbo Ratio Limit (TRL) MSR.
This MSR always accepts the frequency ratio in 100 MHz unit. When the
TPMI is sending TRL in 1 MHz unit, change to 100 MHz, before updating
TRL MSR.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Invocation the tool built with the default settings fails:
$ cpupower
cpupower: error while loading shared libraries: libcpupower.so.1: cannot
open shared object file: No such file or directory
The issue is that Makefile puts the library to "/usr/lib64" dir for a 64
bit machine. This is wrong. According to the "File hierarchy standard
specification:
https://en.wikipedia.org/wiki/Filesystem_Hierarchy_Standardhttps://refspecs.linuxfoundation.org/FHS_3.0/fhs-3.0.pdf
"/usr/lib<qual>" dirs are intended for alternative-format libraries
(e.g., "/usr/lib32" for 32-bit libraries on a 64-bit machine (optional)).
The utility is built for the current machine and doesn't handle
'CROSS_COMPILE' and 'ARCH' env variables. It also doesn't change bit
depth. So the result is always the same - binary for x86_64
architecture. Therefore the library should be put in the '/usr/lib'
dir regardless of the build options.
This is the case for all the distros that comply with the
'File Hierarchy Standard 3.0" by Linux Foundation. Most of the distros
comply with it. For example, one can check this by examining the
"/usr/lb64" dir on debian-based distros and find that it contains only
"/usr/lib64/ld-linux-x86-64.so.2". And examine that "/usr/lib" contains
both 32 and 64 bit code:
find /usr/lib -name "*.so*" -type f | xargs file | grep 32-bit
find /usr/lib -name "*.so*" -type f | xargs file | grep 64-bit
Fix the issue by changing library destination dir to "/usr/lib".
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Execution of the 'make' command in the 'bench' subfolder causes the
following error:
$ make O=cpupower/build/ DESTDIR=cpupower/install/ -j8
" CC " cpupower/build//main.o
" CC " cpupower/build//parse.o
/bin/sh: 1: " CC "cpupower/build//system.o
CC : not found
make: *** [Makefile:21: cpupower/build//main.o] Error 127
make: *** Waiting for unfinished jobs....
/bin/sh: 1: CC : not found
/bin/sh: 1: CC : not found
make: *** [Makefile:21: cpupower/build//parse.o] Error 127
make: *** [Makefile:21: cpupower/build//system.o] Error 127
The makefile uses variables defined in the main project makefile and it
is not intended to run standalone. The reason is that 'bench' subproject
depends on the 'libcpupower' library, see the 'compile-bench' target in
the main makefile.
Add a check that prevents standalone execution of the 'bench' makefile.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It makes it harder to shoot yourself in the foot, by using
additional __must_be_array() check.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Reuse the enum. It means the same thing in both cases.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
fd_perf field used to be part of the union, but later moved out of it,
because we test it with fd_perf != -1 to determine if any perf counter
is opened, making the union unused.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
New CPU #defines encode vendor and family as well as model.
N.B. Copied VFM_*() defines here from <asm/cpu_device_id.h> to avoid
an application picking a second internal kernel header file.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Commit 78464d7681 ("tools/power turbostat: Add columns for clustered
uncore frequency") introduced 'probe_intel_uncore_frequency_cluster()'
in a way which prevents printing uncore frequency columns if either of
the '-q' or '-l' options are used. Systems which do not have multiple
uncore frequencies per package are unaffected by this regression.
Fix the function so that uncore frequency columns are shown when either
the '-l' or '-q' option is used by checking if 'quiet' is true after
adding counters for the uncore frequency columns.
Fixes: 78464d7681 ("tools/power turbostat: Add columns for clustered uncore frequency")
Signed-off-by: Adam Hawley <adam.james.hawley@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
In some cases specifying the '-n' command line argument will cause
turbostat to fail. For instance 'turbostat -n 1' works fine; however,
'turbostat -n 1 -d' will fail. This is the result of the first call
to getopt_long_only() where "MP" is specified as the optstring. This can
be easily fixed by changing the optstring from "MP" to "MPn:" to remove
ambiguity between the arguments.
tools/power turbostat: option '-n' is ambiguous; possibilities: '-num_iterations' '-no-msr' '-no-perf'
Fixes: a0e86c90b8 ("tools/power turbostat: Add --no-perf option")
Signed-off-by: David Arcari <darcari@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This cpupower update for Linux 6.11-rc1 consists of cleanups to man
pages, README files, and enhancements to add help to Makefile.
-----BEGIN PGP SIGNATURE-----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=3Ngt
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.11-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge cpupower utility updates for 6.11 from Shuah Khan:
"This cpupower update for Linux 6.11-rc1 consists of cleanups to man
pages, README files, and enhancements to add help to Makefile."
* tag 'linux-cpupower-6.11-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Change the var type of the 'monitor' subcommand display mode
cpupower: Remove absent 'v' parameter from monitor man page
cpupower: Improve cpupower build process description
cpupower: Add 'help' target to the main Makefile
cpupower: Replace a dead reference link with working ones
There is a type 'enum operation_mode_e' contains the display modes of
the 'monitor' subcommand. This type isn't used though, instead the
variable 'mode' is of a simple 'int' type.
Change 'mode' variable type from 'int' to 'enum operation_mode_e' in
order to improve compiler type checking.
Built and tested this with different monitor cmdline params. Everything
works as expected, that is nothing changed and no regressions encountered.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Remove not supported '-v' parameter from the cpupower's 'monitor'
command description.
There is a '-v' parameter described in cpupower's 'monitor' command man
page. It isn't supported at the moment, and perhaps has never been
supported. When I run the monitor with this parameter I get the
following:
$ sudo LD_LIBRARY_PATH=lib64/ bin/cpupower monitor -v
monitor: invalid option -- 'v'
invalid or unknown argument
$ sudo LD_LIBRARY_PATH=lib64/ bin/cpupower monitor -V
monitor: invalid option -- 'V'
invalid or unknown argument
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Enhance cpupower build process description with the information on
building and installing the utility to the user defined directories
as well as with the information on the way of running the utility from
the custom defined installation directory.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make "cpupower" building process more user friendly by adding 'help'
target to the main makefile. This target describes various build
and cleaning options available to the user.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Replace a dead reference link to a turbo boost technology description with
a reference to a root page of the technology on the Intel site, and add
another one, describing power management technology, which includes short
description of the turbo boost.
Signed-off-by: Roman Storozhenko <romeusmeister@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
sleepgraph/bootgraph function correctly in python3.12 but include a slew
of deprecation warnings for unsupported regexes. This patch fixes up all
the strings in the code so that it comforms with python3.12 standards.
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- fix S3 suspend fail double run by using fp.flush to /sys/power/state
- when running turbostat print the return value
- handle case where html files have binary data
- max issues in summary-issues is now 100 (in case there are thousands)
- add backup to dmidecode, use /sys/class/dmi/id/ in case /dev/mem fails
- update summary page to use full mode (disk-platform instead of disk)
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update cpupower's P-State frequency calculation and reporting with AMD
Family 1Ah+ processors, when using the acpi-cpufreq driver. This is due
to a change in the PStateDef MSR layout in AMD Family 1Ah+.
Tested on 4th and 5th Gen AMD EPYC system
Signed-off-by: Ananth Narayan <Ananth.Narayan@amd.com>
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Survive sparse die id's seen in Linux-6.9.
Handle clustered-uncore topology in new/upcoming hardware.
For non-root use, add ability to see software C-state counters.
Enable reading core and package hardware cstate via perf,
and prefer perf over the MSR driver access for these counters.
-----BEGIN PGP SIGNATURE-----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=7ZNt
-----END PGP SIGNATURE-----
Merge tag 'turbostat-for-Linux-6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Survive sparse die id's seen in Linux-6.9
- Handle clustered-uncore topology in new/upcoming hardware
- For non-root use, add ability to see software C-state counters
- Enable reading core and package hardware cstate via perf, and prefer
perf over the MSR driver access for these counters
* tag 'turbostat-for-Linux-6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2024.05.10
tools/power turbostat: Ignore pkg_cstate_limit when it is not available
tools/power turbostat: Fix order of strings in pkg_cstate_limit_strings
tools/power turbostat: Read Package-cstates via perf
tools/power turbostat: Read Core-cstates via perf
tools/power turbostat: Avoid possible memory corruption due to sparse topology IDs
tools/power turbostat: Add columns for clustered uncore frequency
tools/power turbostat: Enable non-privileged users to read sysfs counters
tools/power turbostat: Replace _Static_assert with BUILD_BUG_ON
tools/power turbostat: Add ARL-H support
tools/power turbostat: Enhance ARL/LNL support
tools/power turbostat: Survive sparse die_id
tools/power turbostat: Remember global max_die_id
tools/power turbostat: Harden probe_intel_uncore_frequency()
tools/power turbostat: Add "snapshot:" Makefile target
Highlights:
- New drivers/platform/arm64 directory for arm64 embedded-controller drivers
- New drivers for:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight support
- Miscellaneous cleanups / fixes / improvements
The following is an automated git shortlog grouped by driver:
ACPI:
- platform-profile: add platform_profile_cycle()
Add ACPI quickstart button (PNP0C32) driver:
- Add ACPI quickstart button (PNP0C32) driver
Add lenovo-yoga-tab2-pro-1380-fastcharger driver:
- Add lenovo-yoga-tab2-pro-1380-fastcharger driver
Add new Dell UART backlight driver:
- Add new Dell UART backlight driver
Add lenovo WMI camera button driver:
- Add lenovo WMI camera button driver
Add new MeeGoPad ANX7428 Type-C Cross Switch driver:
- Add new MeeGoPad ANX7428 Type-C Cross Switch driver
ISST:
- Support SST-BF and SST-TF per level
- Add missing MODULE_DESCRIPTION
- Add dev_fmt
- Use in_range() to check package ID validity
- Support partitioned systems
- Shorten the assignments for power_domain_info
- Use local variable for auxdev->dev
MAINTAINERS:
- drop Daniel Oliveira Nascimento
arm64:
- dts: qcom: acer-aspire1: Add embedded controller
asus-laptop:
- Use sysfs_emit() and sysfs_emit_at() to replace sprintf()
asus-wmi:
- cleanup main struct to avoid some holes
- Add support for MCU powersave
- ROG Ally increase wait time, allow MCU powersave
- adjust formatting of ppt-<name>() functions
- store a min default for ppt options
- support toggling POST sound
- add support variant of TUF RGB
- add support for Vivobook GPU MUX
- add support for 2024 ROG Mini-LED
- use sysfs_emit() instead of sprintf()
classmate-laptop:
- Add missing MODULE_DESCRIPTION()
devm-helpers:
- Fix a misspelled cancellation in the comments
dt-bindings:
- leds: Add LED_FUNCTION_FNLOCK
- platform: Add Acer Aspire 1 EC
hp-wmi:
- use sysfs_emit() instead of sprintf()
huawei-wmi:
- use sysfs_emit() instead of sprintf()
ideapad-laptop:
- switch platform profiles using thermal management key
- add FnLock LED class device
- add fn_lock_get/set functions
intel-vbtn:
- Log event code on unexpected button events
intel/pmc:
- Enable S0ix blocker show in Lunar Lake
- Add support to show S0ix blocker counter
- Update LNL signal status map
msi-laptop:
- Use sysfs_emit() to replace sprintf()
p2sb:
- Don't init until unassigned resources have been assigned
- Make p2sb_get_devfn() return void
platform:
- arm64: Add Acer Aspire 1 embedded controller driver
- Add ARM64 platform directory
platform/surface:
- aggregator: Log critical errors during SAM probing
- aggregator_registry: Add support for thermal sensors on the Surface Pro 9
- platform_profile: add fan profile switching
platform/x86/amd:
- pmc: Add new ACPI ID AMDI000B
- pmf: Add new ACPI ID AMDI0105
platform/x86/amd/hsmp:
- switch to use device_add_groups()
platform/x86/amd/pmc:
- Fix implicit declaration error on i386
- Add AMD MP2 STB functionality
platform/x86/fujitsu-laptop:
- Replace sprintf() with sysfs_emit()
platform/x86/intel-uncore-freq:
- Don't present root domain on error
platform/x86/intel/ifs:
- Disable irq during one load stage
- trace: display batch num in hex
- Classify error scenarios correctly
platform/x86/intel/pmc:
- Fix PCH names in comments
platform/x86/intel/sdsi:
- Add attribute to read the current meter state
- Add in-band BIOS lock support
- Combine read and write mailbox flows
- Set message size during writes
platform/x86/intel/tpmi:
- Add additional TPMI header fields
- Align comments in kernel-doc
- Check major version change for TPMI Information
- Handle error from tpmi_process_info()
quickstart:
- Fix race condition when reporting input event
- fix Kconfig selects
- Miscellaneous improvements
samsung-laptop:
- Use sysfs_emit() to replace the old interface sprintf()
think-lmi:
- Convert container_of() macros to static inline
thinkpad_acpi:
- Use false to set acpi_send_ev to false
- Support hotkey to disable trackpoint doubletap
- Support for system debug info hotkey
- Support for trackpoint doubletap
- Simplify known_ev handling
- Add mappings for adaptive kbd clipping-tool and cloud keys
- Switch to using sparse-keymap helpers
- Drop KEY_RESERVED special handling
- Use correct keycodes for volume and brightness keys
- Change hotkey_reserved_mask initialization
- Do not send ACPI netlink events for unknown hotkeys
- Move tpacpi_driver_event() call to tpacpi_input_send_key()
- Move hkey > scancode mapping to tpacpi_input_send_key()
- Drop tpacpi_input_send_key_masked() and hotkey_driver_event()
- Always call tpacpi_driver_event() for hotkeys
- Move hotkey_user_mask check to tpacpi_input_send_key()
- Move special original hotkeys handling out of switch-case
- Move adaptive kbd event handling to tpacpi_driver_event()
- Make tpacpi_driver_event() return if it handled the event
- Do hkey to scancode translation later
- Use tpacpi_input_send_key() in adaptive kbd code
- Drop ignore_acpi_ev
- Drop setting send_/ignore_acpi_ev defaults twice
- Provide hotkey_poll_stop_sync() dummy
- Take hotkey_mutex during hotkey_exit()
- change sprintf() to sysfs_emit()
- use platform_profile_cycle()
tools arch x86:
- Add dell-uart-backlight-emulator
tools/arch/x86/intel_sdsi:
- Add current meter support
- Simplify ascii printing
- Fix meter_certificate decoding
- Fix meter_show display
- Fix maximum meter bundle length
tools/power/x86/intel-speed-select:
- v1.19 release
- Display CPU as None for -1
- SST BF/TF support per level
- Increase number of CPUs displayed
- Present all TRL levels for turbo-freq
- Fix display for unsupported levels
- Support multiple dies
- Increase die count
toshiba_acpi:
- Add quirk for buttons on Z830
uv_sysfs:
- use sysfs_emit() instead of sprintf()
wmi:
- Add MSI WMI Platform driver
- Add driver development guide
- Mark simple WMI drivers as legacy-free
- Avoid returning AE_OK upon unknown error
- Support reading/writing 16 bit EC values
x86-android-tablets:
- Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
- Xiaomi pad2 RGB LED fwnode updates
- Pass struct device to init()
- Add Lenovo Yoga Tablet 2 Pro 1380F/L data
- Unregister devices in reverse order
- Add swnode for Xiaomi pad2 indicator LED
- Use GPIO_LOOKUP() macro
xiaomi-wmi:
- Drop unnecessary NULL checks
- Fix race condition when reporting key events
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmZF1kwUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wSXwgAsaSH6Sawn5sHOj52lQY7gNI0uf3V
YfZFawRpreCrlwLPU2f7SX0mLW+hh+ekQ2C1NvaUUVqQwzONELh0DWSYJpzz/v1r
jD14EcY2dnTv+FVyvCj5jZsiYxo/ViTvthMduiO7rrJKN7aOej9iNn68P0lvcY8s
HDJ2lPFNGnY01snz3C1NyjyIWw8YsfwqXEqOmhrDyyoKLXpsDs8H/Jqq5yXfeLax
hSpjbGB85EGJPXna6Ux5TziPh/MYMtF1+8R4Fn0sGvfcZO6/H1fDne0uI9UwrKnN
d2g4VHXU2DIhTshUc14YT2AU27eQiZVN+J3VpuYIbC9cmlQ2F6bjN3uxoQ==
=UWbu
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- New drivers/platform/arm64 directory for arm64 embedded-controller
drivers
- New drivers:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight
support
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
devm-helpers: Fix a misspelled cancellation in the comments
tools arch x86: Add dell-uart-backlight-emulator
platform/x86: Add new Dell UART backlight driver
platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
platform/x86: x86-android-tablets: Pass struct device to init()
platform/x86/amd: pmc: Add new ACPI ID AMDI000B
platform/x86/amd: pmf: Add new ACPI ID AMDI0105
platform/x86: p2sb: Don't init until unassigned resources have been assigned
platform/surface: aggregator: Log critical errors during SAM probing
platform/x86: ISST: Support SST-BF and SST-TF per level
platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
tools/power/x86/intel-speed-select: v1.19 release
tools/power/x86/intel-speed-select: Display CPU as None for -1
tools/power/x86/intel-speed-select: SST BF/TF support per level
tools/power/x86/intel-speed-select: Increase number of CPUs displayed
tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
tools/power/x86/intel-speed-select: Fix display for unsupported levels
tools/power/x86/intel-speed-select: Support multiple dies
...
New since 2024.04.08:
Len Brown (6):
tools/power turbostat: Add "snapshot:" Makefile target
tools/power turbostat: Harden probe_intel_uncore_frequency()
tools/power turbostat: Remember global max_die_id
tools/power turbostat: Survive sparse die_id
tools/power turbostat: Add columns for clustered uncore frequency
tools/power turbostat: version 2024.05.10
Patryk Wlazlyn (7):
tools/power turbostat: Replace _Static_assert with BUILD_BUG_ON
tools/power turbostat: Enable non-privileged users to read sysfs counters
tools/power turbostat: Avoid possible memory corruption due to sparse topology IDs
tools/power turbostat: Read Core-cstates via perf
tools/power turbostat: Read Package-cstates via perf
tools/power turbostat: Fix order of strings in pkg_cstate_limit_strings
tools/power turbostat: Ignore pkg_cstate_limit when it is not available
Zhang Rui (2):
tools/power turbostat: Enhance ARL/LNL support
tools/power turbostat: Add ARL-H support
Signed-off-by: Len Brown <len.brown@intel.com>
When running in no-msr mode, the pkg_cstate_limit is not populated, thus
we use perf to determine if given pcstate counter is present on the
platform.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Change the order so that it matches the indexes defined in:
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Reading the counters via perf can be done in bulk with a single syscall,
making the counter values more accurate with respect to one another by
minimizing the time gap between individual counter reads.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Reading the counters via perf can be done in bulk with a single syscall,
making the counter values more accurate with respect to one another by
minimizing the time gap between individual counter reads.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Save the highest core and package id when parsing topology to
allocate enough memory when get_rapl_counters() is called with a core or
a package id as a domain.
Note that RAPL domains are per-package on Intel, but per-core on AMD.
Thus, the RAPL code effectively runs in different modes on those two
product lines.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
New machines have multiple uncore frequencies per package,
visible in /sys/devices/system/cpu/intel_uncore_frequency/uncore##/
turbostat now samples these frequencies each measurement interval.
For each package, turbostat now prints "UMHzX.Y" columns,
where X = domain_id, and Y = fabric_cluster_id.
The system summary for each UMHzX.Y column is the average value
for across all of the packages in the system.
Signed-off-by: Len Brown <len.brown@intel.com>
A group of counters called "sysfs" displays software
C-state request counts and resulting perceived C-state residency.
They are not built-in counters that turbostat knows about ahead of time,
rather they are discovered in sysfs when turbostat starts.
Thus, they are added dynamically, using the same interface
as user-added MSR counters.
When turbostat enters "no-msr" mode, such as when running as a
non-privileged user, it clears all added counters.
Updating that to clear only actual MSR added counters
allows regular users to see the sysfs counters.
[lenb: commit message]
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add turbostat support for ARL-H, which behaves the same as ARL.
[lenb: also add ARL-U]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
ARL/LNL don't have PC8, other than that, it behaves the same as CNL.
Copy cnl_features for ARL/LNL, except that PC8 support is removed.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This version addresses issues with:
- Support of SST BF/TF support per level
- Increase number of CPUs displayed
- Present all TRL levels for turbo-freq
- Fix display for unsupported levels
- Support multiple dies
- Increase die count
- Change CPU display for non compute domain
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When there is no CPU in a power domain, display "None" instead of -1.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
SST BF and TF can be enabled/disabled per level. So check the current
level support from the mask of supported levels.
This change from a single level to mask for info.sst_tf_support and
info.sst_tf_support is indicated by API version change. Use as mask for
API version above 2. In this way there is no change in behavior when
running on older kernel with API version 2.
Since the tool can support now API version 3, update the supported API
version.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently max 128 CPUs can be displayed in the enable CPU list. Double
the range. Since the size is big for stack allocation, change to static.
Here changing to static is fine as these functions are called in serial.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
For turbo-freq feature, only 3 levels of frequencies are displayed even
if platform support more. Present all levels based on the CPU model.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
During call to "intel-speed-select turbo-freq info" some junk values are
reported for unsupported levels. Initialize the structure fact_info with
0s, so that isst_fact_display_information() will skip "0" values in the
frequency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When the die id is same as punit compute die ID, treat them same. In this
case, when for_each_online_power_domain_in_set() is called, then don't
loop for each punit in a die. Just loop for all punits in a package.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
TPMI platform information supports up to 16 compute dies. So increase the
range.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
There is request from the end user to print this field to better
query what type of update capability is supported on this platform.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Turbostat assumed that every package had a die_id = 0.
When this assumption was violated, it exited
when looking for the package uncore frequency:
turbostat: /sys/.../intel_uncore_frequency/package_01_die_00/current_freq_khz: open failed: No such file or directory
Signed-off-by: Len Brown <len.brown@intel.com>
If sysfs directory "intel_uncore_frequency/cluster00/" exists,
then use uncore cluster code (now its own routine).
The previous check for
"intel_uncore_frequency/package_00_die_00/current_freq_khz",
could be unreliable in the face of sparse die id's.
Signed-off-by: Len Brown <len.brown@intel.com>
Kernel developers often need to diagnose remote customer systems
with the latest turbostat, yet customers are running binary distros
with out-dated turbostat and the customer has no experience
cloning linux kernel trees.
Add a turbostat "snapshot" makefile target to create a standalone
source snapshot from the developer's git tree, appropriately hacked
so that the customer can build turbostat without a kernel tree.
Include the turbostat binary in the snapshot, for convenience in
those situations where the source and destination are trusted,
(and have new enough glibc to execute).
The snapshot is named with the date it was taken rather than
the turbostat VERSION, as it could occur between VERSIONS...
Signed-off-by: Len Brown <len.brown@intel.com>
Use of the CPU MSR driver is now optional.
Perf is now preferred for many counters.
Non-root users can now execute turbostat, though with limited function.
Add counters for some new GFX hardware.
Minor fixes.
-----BEGIN PGP SIGNATURE-----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=oucB
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2024.04.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Use of the CPU MSR driver is now optional
- Perf is now preferred for many counters
- Non-root users can now execute turbostat, though with limited
functionality
- Add counters for some new GFX hardware
- Minor fixes
* tag 'turbostat-2024.04.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (26 commits)
tools/power turbostat: v2024.04.10
tools/power/turbostat: Add support for Xe sysfs knobs
tools/power/turbostat: Add support for new i915 sysfs knobs
tools/power/turbostat: Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz
tools/power/turbostat: Fix uncore frequency file string
tools/power/turbostat: Unify graphics sysfs snapshots
tools/power/turbostat: Cache graphics sysfs path
tools/power/turbostat: Enable MSR_CORE_C1_RES support for ICX
tools/power turbostat: Add selftests
tools/power turbostat: read RAPL counters via perf
tools/power turbostat: Add proper re-initialization for perf file descriptors
tools/power turbostat: Clear added counters when in no-msr mode
tools/power turbostat: add early exits for permission checks
tools/power turbostat: detect and disable unavailable BICs at runtime
tools/power turbostat: Add reading aperf and mperf via perf API
tools/power turbostat: Add --no-perf option
tools/power turbostat: Add --no-msr option
tools/power turbostat: enhance -D (debug counter dump) output
tools/power turbostat: Fix warning upon failed /dev/cpu_dma_latency read
tools/power turbostat: Read base_hz and bclk from CPUID.16H if available
...
Much of turbostat can now run with perf, rather than using the MSR driver
Some of turbostat can now run as a regular non-root user.
Add some new output columns for some new GFX hardware.
[This patch updates the version, but otherwise changes no function;
it touches up some checkpatch issues from previous patches]
Signed-off-by: Len Brown <len.brown@intel.com>
Xe graphics driver uses different graphics sysfs knobs including
/sys/class/drm/card0/device/tile0/gt0/gtidle/idle_residency_ms
/sys/class/drm/card0/device/tile0/gt0/freq0/cur_freq
/sys/class/drm/card0/device/tile0/gt0/freq0/act_freq
/sys/class/drm/card0/device/tile0/gt1/gtidle/idle_residency_ms
/sys/class/drm/card0/device/tile0/gt1/freq0/cur_freq
/sys/class/drm/card0/device/tile0/gt1/freq0/act_freq
Plus that,
/sys/class/drm/card0/device/tile0/gt<n>/gtidle/name
returns either gt<n>-rc or gt<n>-mc. rc is for GFX and mc is SA Media.
Enhance turbostat to prefer the Xe sysfs knobs when they are available.
Export gt<n>-rc via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt<n>-mc via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
On Meteorlake platform, i915 driver supports the traditional graphics
sysfs knobs including
/sys/class/drm/card0/power/rc6_residency_ms
/sys/class/drm/card0/gt_cur_freq_mhz
/sys/class/drm/card0/gt_act_freq_mhz
At the same time, it also supports
/sys/class/drm/card0/gt/gt0/rc6_residency_ms
/sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz
/sys/class/drm/card0/gt/gt0/rps_act_freq_mhz
/sys/class/drm/card0/gt/gt1/rc6_residency_ms
/sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz
/sys/class/drm/card0/gt/gt1/rps_act_freq_mhz
gt0 is for GFX and gt1 is for SA Media.
Enhance turbostat to prefer the i915 new sysfs knobs.
Export gt0 via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt1 via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Graphics driver (i915/Xe) on mordern platforms splits GFX and SA Media
information via different sysfs knobs.
Existing BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz columns can be reused for
GFX.
Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz columns for SA Media.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Running turbostat on a 16 socket HPE Scale-up Compute 3200 (SapphireRapids) fails with:
turbostat: /sys/devices/system/cpu/intel_uncore_frequency/package_010_die_00/current_freq_khz: open failed: No such file or directory
We observe the sysfs uncore frequency directories named:
...
package_09_die_00/
package_10_die_00/
package_11_die_00/
...
package_15_die_00/
The culprit is an incorrect sprintf format string "package_0%d_die_0%d" used
with each instance of reading uncore frequency files. uncore-frequency-common.c
creates the sysfs directory with the format "package_%02d_die_%02d". Once the
package value reaches double digits, the formats diverge.
Change each instance of "package_0%d_die_0%d" to "package_%02d_die_%02d".
[lenb: deleted the probe part of this patch, as it was already fixed]
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Graphics sysfs snapshots share similar logic.
Combine them into one function to avoid code duplication.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Graphics drivers (i915/Xe) have different sysfs knobs on different
platforms, and it is possible that different sysfs knobs fit into the
same turbostat columns.
Instead of specifying different sysfs knobs every time, detect them
once and cache the path for future use.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some of the future Intel platforms will require reading the RAPL
counters via perf and not MSR. On current platforms we can still read
them using both ways.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
If user request --no-msr or is not able to access the MSRs,
turbostat should clear all the counters added with --add.
Because MSR access permission checks are done after the cmdline is
parsed, the decision has to be defered up until the transition into
no-msr mode happen.
Signed-off-by: Len Brown <len.brown@intel.com>
Checking early if the permissions are even needed gets rid of the
warnings about some of them missing. Earlier we issued a warning in case
of missing MSR and/or perf permissions, even when user never asked for
counters that require those.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
To allow unprivileged user to run turbostat seamlessly.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
By using the perf API we spend less time in between the reads of the
counters, resulting in more accurate calculations of the dependent
metrics.
Using perf API is also usually faster overall, although cache miss, if
we get one, is more costly when using perf vs MSR driver.
We would fallback to the msr reads if the sysfs isn't there or when in
--no-perf mode.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add the --no-perf option to allow users to run turbostat without
accessing perf.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add --no-msr option to allow users to run turbostat without
accessing MSRs via the MSR driver.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Eliminate redundant debug output for core and package scope counters.
Include name and path for all "ADDED" counters.
Signed-off-by: Len Brown <len.brown@intel.com>
Previously a failed read of /dev/cpu_dma_latency erroneously complained
turbostat: capget(CAP_SYS_ADMIN) failed, try "# setcap cap_sys_admin=ep ./turbostat
This went unnoticed because this file is typically visible to root,
and turbostat was typically run as root.
Going forward, when a non-root user can run turbostat...
Complain about failed read access to this file only if --debug is used.
Signed-off-by: Len Brown <len.brown@intel.com>
If MSRs cannot be read, values can be obtained from cpuid.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This cpupower update for Linux 6.9-rc1 consists of a single fix
to a typo in cpupower-frequency-info.1 man page.
-----BEGIN PGP SIGNATURE-----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=oaz3
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge a cpupower utility documentation update for 6.9-rc1 from Shuah Khan:
"This cpupower update for Linux 6.9-rc1 consists of a single fix
to a typo in cpupower-frequency-info.1 man page."
* tag 'linux-cpupower-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
Fix cpupower-frequency-info.1 man page typo
cpupower-frequency-info.1 man page type is incorrect for
related-cpus. Fix it.
utils/cpufreq-info.c
{"related-cpus", no_argument, NULL, 'r'},
{"affected-cpus", no_argument, NULL, 'a'},
Fixed changelog before applying:
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jan Kratochvil <jan@jankratochvil.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In function get_pkg_num() if fopen_or_die() succeeds it returns a file
pointer to be used. But fclose() is never called before returning from
the function.
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Allow user to specify outside CFLAGS values as make argument
Corrects an issue where CFLAGS is passed as a make argument for
cpupower, but bench's makefile does not inherit and append to them.
Signed-off-by: Stanley Chan <schan@cloudflare.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If the MSR read were to fail, turbostat would print "microcode 0x0"
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Print current frequency along with the current (and initial) limits
Probe and print uncore config also for machines using the new cluster API
Signed-off-by: Len Brown <len.brown@intel.com>
turbostat prints the abnormal SYS%LPI across suspend-to-idle:
SYS%LPI = 114479815993277.50
This is reproduced by:
Run a freeze cycle, e.g. "sleepgraph -m freeze -rtcwake 15".
Then do a reboot. After boot up, launch the suspend-idle-idle
and check the SYS%LPI field.
The slp_so residence counter is in LPIT table, and BIOS does not
clears this register across reset. The PMC expects the OS to calculate
the LPI residency based on the delta. However, there is an firmware
issue that the LPIT gets cleared to 0 during the second suspend
to idle after the reboot, which brings negative delta value.
[lenb: updated to print "neg" upon this BIOS failure]
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The code calculates Bzy_MHz by multiplying TSC_delta * APERF_delta/MPERF_delta
The man page erroneously showed that TSC_delta was divided.
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Signed-off-by: Len Brown <len.brown@intel.com>
When running turbostat, a system with 512 cpus reaches the limit for
maximum number of file descriptors that can be opened. To solve this
problem, the limit is raised to 2^15, which is a large enough number.
Below data is collected from AMD server systems while running turbostat:
|-----------+-------------------------------|
| # of cpus | # of opened fds for turbostat |
|-----------+-------------------------------|
| 128 | 260 |
|-----------+-------------------------------|
| 192 | 388 |
|-----------+-------------------------------|
| 512 | 1028 |
|-----------+-------------------------------|
So, the new max limit would be sufficient up to 2^14 cpus (but this
also depends on how many counters are enabled).
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The sleepgraph tool currently fails:
File "/usr/bin/sleepgraph", line 4155
or re.match('psci: CPU(?P<cpu>[0-9]*) killed.*', msg)):
^
SyntaxError: unmatched ')'
Fixes: 34ea427e01 ("PM: tools: sleepgraph: Recognize "CPU killed" messages")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----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=J72l
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2023.11.07' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Turbostat features are now table-driven (Rui Zhang)
- Add support for some new platforms (Sumeet Pawnikar, Rui Zhang)
- Gracefully run in configs when CPUs are limited (Rui Zhang, Srinivas
Pandruvada)
- misc minor fixes
[ This came in during the merge window, but sorting out the signed tag
took a while, so thus the late merge - Linus ]
* tag 'turbostat-2023.11.07' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (86 commits)
tools/power turbostat: version 2023.11.07
tools/power/turbostat: bugfix "--show IPC"
tools/power/turbostat: Add initial support for LunarLake
tools/power/turbostat: Add initial support for ArrowLake
tools/power/turbostat: Add initial support for GrandRidge
tools/power/turbostat: Add initial support for SierraForest
tools/power/turbostat: Add initial support for GraniteRapids
tools/power/turbostat: Add MSR_CORE_C1_RES support for spr_features
tools/power/turbostat: Move process to root cgroup
tools/power/turbostat: Handle cgroup v2 cpu limitation
tools/power/turbostat: Abstrct function for parsing cpu string
tools/power/turbostat: Handle offlined CPUs in cpu_subset
tools/power/turbostat: Obey allowed CPUs for system summary
tools/power/turbostat: Obey allowed CPUs for primary thread/core detection
tools/power/turbostat: Abstract several functions
tools/power/turbostat: Obey allowed CPUs during startup
tools/power/turbostat: Obey allowed CPUs when accessing CPU counters
tools/power/turbostat: Introduce cpu_allowed_set
tools/power/turbostat: Remove PC7/PC9 support on ADL/RPL
tools/power/turbostat: Enable MSR_CORE_C1_RES on recent Intel client platforms
...
Turbostat features are now table-driven (Rui Zhang)
Add support for some new platforms (Sumeet Pawnikar, Rui Zhang)
Gracefully run in configs when CPUs are limited (Rui Zhang, Srinivas Pandruvada)
misc minor fixes.
Signed-off-by: Len Brown <len.brown@intel.com>
turbostat --show IPC
displays "inf" for the IPC column
turbostat was missing the explicit dependency of IPC on APERF,
and thus neglected to collect APERF when only IPC was requested.
typcial use:
turbostat --quiet --show CPU,IPC
Signed-off-by: Len Brown <len.brown@intel.com>
Merge cpupower utility update for 6.7-rc1:
- Fix a reference to a removed document in the cpupower utility
documentation (Vegard Nossum).
* pm-tools:
cpupower: fix reference to nonexistent document
This cpupower update for Linux 6.7-rc1 consists of a single fix to
documentation to fix reference to a removed document.
-----BEGIN PGP SIGNATURE-----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=p8rZ
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge cpupower utility update for 6.7-rc1 from Shuah Khan:
"This cpupower update for Linux 6.7-rc1 consists of a single fix to
documentation to fix reference to a removed document."
* tag 'linux-cpupower-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: fix reference to nonexistent document
This kselftest update for Linux 6.7-rc1 consists of:
-- kbuild kselftest-merge target fixes
-- fixes to several tests
-- resctrl test fixes and enhancements
-- ksft_perror() helper and reporting improvements
-- printf attribute to kselftest prints to improve reporting
-- documentation and clang build warning fixes
Bulk of the patches are for resctrl fixes and enhancements.
-----BEGIN PGP SIGNATURE-----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=JZb+
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- kbuild kselftest-merge target fixes
- fixes to several tests
- resctrl test fixes and enhancements
- ksft_perror() helper and reporting improvements
- printf attribute to kselftest prints to improve reporting
- documentation and clang build warning fixes
The bulk of the patches are for resctrl fixes and enhancements.
* tag 'linux_kselftest-next-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (51 commits)
selftests/resctrl: Fix MBM test failure when MBA unavailable
selftests/clone3: Report descriptive test names
selftests:modify the incorrect print format
selftests/efivarfs: create-read: fix a resource leak
selftests/ftrace: Add riscv support for kprobe arg tests
selftests/ftrace: add loongarch support for kprobe args char tests
selftests/amd-pstate: Added option to provide perf binary path
selftests/amd-pstate: Fix broken paths to run workloads in amd-pstate-ut
selftests/resctrl: Move run_benchmark() to a more fitting file
selftests/resctrl: Fix schemata write error check
selftests/resctrl: Reduce failures due to outliers in MBA/MBM tests
selftests/resctrl: Fix feature checks
selftests/resctrl: Refactor feature check to use resource and feature name
selftests/resctrl: Move _GNU_SOURCE define into Makefile
selftests/resctrl: Remove duplicate feature check from CMT test
selftests/resctrl: Extend signal handler coverage to unmount on receiving signal
selftests/resctrl: Fix uninitialized .sa_flags
selftests/resctrl: Cleanup benchmark argument parsing
selftests/resctrl: Remove ben_count variable
selftests/resctrl: Make benchmark command const and build it with pointers
...
Highlights:
- asus-wmi: Support for screenpad and solve brightness key
press duplication
- int3472: Eliminate the last use of deprecated GPIO functions
- mlxbf-pmc: New HW support
- msi-ec: Support new EC configurations
- thinkpad_acpi: Support reading aux MAC address during passthrough
- wmi: Fixes & improvements
- x86-android-tablets: Detection fix and avoid use of GPIO private APIs
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
The following is an automated shortlog grouped by driver:
acer-wmi:
- Remove void function return
amd/hsmp:
- add support for metrics tbl
- create plat specific struct
- Fix iomem handling
- improve the error log
amd/pmc:
- Add dump_custom_stb module parameter
- Add PMFW command id to support S2D force flush
- Handle overflow cases where the num_samples range is higher
- Use flex array when calling amd_pmc_stb_debugfs_open_v2()
asus-wireless:
- Replace open coded acpi_match_acpi_device()
asus-wmi:
- add support for ASUS screenpad
- Do not report brightness up/down keys when also reported by acpi_video
gpiolib: acpi:
- Add a ignore interrupt quirk for Peaq C1010
- Check if a GPIO is listed in ignore_interrupt earlier
hp-bioscfg:
- Annotate struct bios_args with __counted_by
inspur-platform-profile:
- Add platform profile support
int3472:
- Add new skl_int3472_fill_gpiod_lookup() helper
- Add new skl_int3472_gpiod_get_from_temp_lookup() helper
- Stop using gpiod_toggle_active_low()
- Switch to devm_get_gpiod()
intel: bytcrc_pwrsrc:
- Convert to platform remove callback returning void
intel/ifs:
- Add new CPU support
- Add new error code
- ARRAY BIST for Sierra Forest
- Gen2 scan image loading
- Gen2 Scan test support
- Metadata validation for start_chunk
- Refactor image loading code
- Store IFS generation number
- Validate image size
intel_speed_select_if:
- Remove hardcoded map size
- Use devm_ioremap_resource
intel/tpmi:
- Add debugfs support for read/write blocked
- Add defines to get version information
intel-uncore-freq:
- Ignore minor version change
ISST:
- Allow level 0 to be not present
- Ignore minor version change
- Use fuse enabled mask instead of allowed levels
mellanox:
- Fix misspelling error in routine name
- Rename some init()/exit() functions for consistent naming
mlxbf-bootctl:
- Convert to platform remove callback returning void
mlxbf-pmc:
- Add support for BlueField-3
mlxbf-tmfifo:
- Convert to platform remove callback returning void
mlx-Convert to platform remove callback returning void:
- mlx-Convert to platform remove callback returning void
mlxreg-hotplug:
- Convert to platform remove callback returning void
mlxreg-io:
- Convert to platform remove callback returning void
mlxreg-lc:
- Convert to platform remove callback returning void
msi-ec:
- Add more EC configs
- rename fn_super_swap
nvsw-sn2201:
- Convert to platform remove callback returning void
sel3350-Convert to platform remove callback returning void:
- sel3350-Convert to platform remove callback returning void
siemens: simatic-ipc-batt-apollolake:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt-elkhartlake:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt-f7188x:
- Convert to platform remove callback returning void
siemens: simatic-ipc-batt:
- Simplify simatic_ipc_batt_remove()
surface: acpi-notify:
- Convert to platform remove callback returning void
surface: aggregator:
- Annotate struct ssam_event with __counted_by
surface: aggregator-cdev:
- Convert to platform remove callback returning void
surface: aggregator-registry:
- Convert to platform remove callback returning void
surface: dtx:
- Convert to platform remove callback returning void
surface: gpe:
- Convert to platform remove callback returning void
surface: hotplug:
- Convert to platform remove callback returning void
surface: surface3-wmi:
- Convert to platform remove callback returning void
think-lmi:
- Add bulk save feature
- Replace kstrdup() + strreplace() with kstrdup_and_replace()
- Use strreplace() to replace a character by nul
thinkpad_acpi:
- Add battery quirk for Thinkpad X120e
- replace deprecated strncpy with memcpy
- sysfs interface to auxmac
tools/power/x86/intel-speed-select:
- Display error for core-power support
- Increase max CPUs in one request
- No TRL for non compute domains
- Sanitize integer arguments
- turbo-mode enable disable swapped
- Update help for TRL
- Use cgroup isolate for CPU 0
- v1.18 release
wmi:
- Decouple probe deferring from wmi_block_list
- Decouple WMI device removal from wmi_block_list
- Fix opening of char device
- Fix probe failure when failing to register WMI devices
- Fix refcounting of WMI devices in legacy functions
x86-android-tablets:
- Add a comment about x86_android_tablet_get_gpiod()
- Create a platform_device from module_init()
- Drop "linux,power-supply-name" from lenovo_yt3_bq25892_0_props[]
- Fix Lenovo Yoga Tablet 2 830F/L vs 1050F/L detection
- Remove invalid_aei_gpiochip from Peaq C1010
- Remove invalid_aei_gpiochip support
- Stop using gpiolib private APIs
- Use platform-device as gpio-keys parent
xo15-ebook:
- Replace open coded acpi_match_acpi_device()
Merges:
- Merge branch 'pdx86/platform-drivers-x86-int3472' into review-ilpo
- Merge branch 'pdx86/platform-drivers-x86-mellanox-init' into review-ilpo
- Merge remote-tracking branch 'intel-speed-select/intel-sst' into review-ilpo
- Merge remote-tracking branch 'pdx86/platform-drivers-x86-android-tablets' into review-hans
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZT+lBwAKCRBZrE9hU+XO
Mck0AQCFU7dYLCF4d1CXtHf1eZhSXLpYdhcO+C08JGGoM+MqSgD+Jyb9KJHk4pxE
FvKG51I9neyAne9lvNrLodHRzxCYgAo=
=duM8
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- asus-wmi: Support for screenpad and solve brightness key press
duplication
- int3472: Eliminate the last use of deprecated GPIO functions
- mlxbf-pmc: New HW support
- msi-ec: Support new EC configurations
- thinkpad_acpi: Support reading aux MAC address during passthrough
- wmi: Fixes & improvements
- x86-android-tablets: Detection fix and avoid use of GPIO private APIs
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: inspur-platform-profile: Add platform profile support
platform/x86: thinkpad_acpi: Add battery quirk for Thinkpad X120e
platform/x86: wmi: Decouple WMI device removal from wmi_block_list
platform/x86: wmi: Fix opening of char device
platform/x86: wmi: Fix probe failure when failing to register WMI devices
platform/x86: wmi: Fix refcounting of WMI devices in legacy functions
platform/x86: wmi: Decouple probe deferring from wmi_block_list
platform/x86/amd/hsmp: Fix iomem handling
platform/x86: asus-wmi: Do not report brightness up/down keys when also reported by acpi_video
platform/x86: thinkpad_acpi: replace deprecated strncpy with memcpy
tools/power/x86/intel-speed-select: v1.18 release
tools/power/x86/intel-speed-select: Use cgroup isolate for CPU 0
tools/power/x86/intel-speed-select: Increase max CPUs in one request
tools/power/x86/intel-speed-select: Display error for core-power support
tools/power/x86/intel-speed-select: No TRL for non compute domains
tools/power/x86/intel-speed-select: turbo-mode enable disable swapped
tools/power/x86/intel-speed-select: Update help for TRL
tools/power/x86/intel-speed-select: Sanitize integer arguments
platform/x86: acer-wmi: Remove void function return
platform/x86/amd/pmc: Add dump_custom_stb module parameter
...
This file was renamed from .txt to .rst and left a dangling reference.
Fix it.
Fixes: 151f4e2bdc ("docs: power: convert docs to ReST and rename to *.rst")
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add initial support for GrandRidge.
It shares the same features as SierraForest, except that it does not
support PC2/PC6.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Add initial support for SierraForest.
It shares the same features with SapphireRapids, except that it has
MSR_MODULE_C6_RES_MS support.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Add MSR_CORE_C1_RES support for spr_features because both Sapphirerapids
and Emeraldrapids support this MSR.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
When available CPUs are reduced via cgroup cpuset controller, turbostat
will exit with errors (For example):
get_counters: Could not migrate to CPU 0
turbostat: re-initialized with num_cpus 20
get_counters: Could not migrate to CPU 0
turbostat: re-initialized with num_cpus 20
Move the turbostat to root cgroup, which has every CPU.
Writing the value 0 to a cgroup.procs file causes the writing
process to be moved to the corresponding cgroup.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
CPUs can be isolated via cgroup settings and turbostat should avoid
migrating to these CPUs, just like it does for the '-c' cpus.
Introduce cpu_effective_set to save the cgroup cpu limitation info from
/sys/fs/cgroup/cpuset.cpus.effective. And use cpu_allowed_set as the
intersection of cpu_present_set, cpu_effective_set and cpu_subset.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Abstract parse_cpu_str() which can update any specified cpu_set by a
given cpu string. This can be used to handle further CPU limitations
from other sources like cgroup.
The cpu string parsing code is also enhanced to handle the strings that
have an extra '\n' before string terminator.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
It is possible that the cpu_subset contains offlined CPUs.
If this happens during start, exit immediately because this is likely an
operator error that is best fixed by re-invoking.
If this happens at runtime, give a warning only because turbostat should
do its best effort to continue running.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
System summary should summarize the information for allowed CPUs instead
of all the present CPUs.
Introduce topology information for allowed CPUs, and use them to
get system summary.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Thread_id doesn't tell if a CPU is allowed or not.
Detect allowed CPUs only and use the first detected thread/core as the
primary thread/core of a core/package.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
When detecting the primary thread/core in a core/package, current code
doesn't handle the allowed CPUs.
Abstract several functions for further fix of this issue.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Set turbostat CPU affinity to make sure turbostat is running on one of
the allowed CPUs.
Set base_cpu to the first allowed CPU so that some platform information
is dumped using one of the allowed CPUs.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
for_all_cpus/for_all_cpus_2 are used for accessing the per CPU counters,
and they should follow the cpu_allowed_set instead of cpu_present_set.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Turbostat supports "-c" parameter which limits output to system summary
plus the specified cpu-set. But some code still uses cpu_present_set to
read and dump the counters.
Introduce cpu_allowed_set for code that should obey the specified cpu-set.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This version addresses issues with:
- When CPU 0 hotplug is not possible, try cgroup v2 isolation
without any user input
- Fix turbo mode enable/disable swapped
- Sanitize command line integer and hex arguments
- Add more error messages
- Increase CPU count in one request
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
From kernel version 6.5, CPU 0 hotplug capability is deprecated.
If some SST profile doesn't have CPU 0, then it is no longer possible to
offline CPU 0. This means that user space threads will still run on
CPU 0.
To workaround this issue, use cgroup v2 isolation feature. Whenever there
/sys/devices/system/cpu/cpu0/online file is absent or open fails, isolate
CPU 0 via CPU cgroup v2 isolation. Also add a command line option to
force even if the /sys/devices/system/cpu/cpu0/online is present.
The previous commit "01bcb56f059e ("tools/power/x86/intel-speed-select:
Prevent CPU 0 offline") was just warning about this issue based on the
kernel version 6.5 and above. With this new approach, instead of warning
take action to mitigate the issue.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
With the increase in the CPU count, this count needs to be updated.
Increase max CPU count to 512.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When core-power is getting enabled, if the feaure is not supported,
display error.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The command for turbo-mode enable and disable is swapped. Fix that.
Previously turbo-mode enable was actually disabling and disable was
enabling.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
TRL (turbo ratio limit) argument is passed in hex string. Clarify that
in the help.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
If the command takes some integer arguments, make sure the command
contains only digits. Same for Hex arguments. Otherwise return error.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
In selftests/amd-pstate, tbench and gitsource microbenchmarks are
used to compare the performance with different governors. In current
implementation the relative path to run `amd_pstate_tracer.py` is broken.
Fix this by using absolute paths.
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Compared with other platforms that share cnl_features, ADL/RPL don't
have PC7/PC9.
Clone a new platform feature set from cnl_features for ADL/RPL, with
PC7/PC9 removed.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
All recent Intel client platforms have MSR_CORE_C1_RES. Enable the
support on these platforms, including CNL/ICL/LKF/RKL/TGL/ADL/RPL/MTL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Feature probe has nothing to do with CPUID, thus it should not be in
process_cpuids().
Introduce probe_pm_features() and move all feature probing functions
into it.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Relocate more feature probing code outside of process_cpuids() into the
corresponding probing functions.
This improves the readability of code and the turbostat output.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Reorder some functions to solve code depdency introduced by next patch.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Introduce probe_thermal(), and move all thermal probing related code
into it.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Introduce probe_lpi(), and move all lpi probing related code into it.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Introduce probe_graphics(), and move all graphics probing related code
into it.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Rename rapl_probe() to probe_rapl() to be consistent with other probing
function names.
Probe rapl after probing uncore frequency.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Rename intel_uncore_frequency_probe() to probe_intel_uncore_frequency()
to be consistent with other probing function names.
Probe uncore frequency right after probing cstates.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Introduce probe_pstates() and move all pstate probing related code into
it.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Move all cstate probing related code into probe_cstates().
Note that dump_platform_info() actually dumps both MSR_PLATFORM_INFO and
MSR_IA32_POWER_CTL. MSR_PLATFORM_INFO is for pstate and
MSR_IA32_POWER_CTL is for cstate. So split dump_platform_info() and dump
MSR_IA32_POWER_CTL in probe_cstates().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
AMD/Hygon platforms that don't have RAPL use 'amd_features' to describe
the platform features. Unknown Intel platforms use 'default_features' to
describe the platform features.
As none of the platform feature is set for 'amd_features' or
'default_features', there is no need to maintain both of them.
Remove 'amd_features' structure and improve the logic in
probe_platform_features().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Now CPU model checks have been cleaned up, no code depends on the
duplicated CPU model value.
Delete intel_model_duplicates().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract cstate prewake bit support.
Delete is_icx()/is_spr() CPU model checks.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract aperf/mperf multiplier support.
Delete is_knl() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for MSR_PKG_WEIGHTED_CORE_C0_RES,
MSR_PKG_ANY_CORE_C0_RES, MSR_PKG_ANY_GFXE_C0_RES and
MSR_PKG_BOTH_CORE_GFXE_C0_RES.
Delete has_skl_msrs() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for MSR_ATOM_PKG_C6_RESIDENCY.
Delete is_slm() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for MSR_CC6/MC6_DEMOTION_POLICY_CONFIG.
Delete has_slv_msrs() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for MSR_CORE_C1_RES.
Delete is_dnv() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for MSR_PKGC3/PKGC6/PKGC7/PKGC8/PKGC9/PKGC10_IRTL.
Delete has_snb_msrs() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
It is pointless to dump the IRTL register for a package cstate that is
not supported by the platform.
Print IRTL only for states that are available in
platform->supported_cstates.
Delete has_c8910_msrs() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Disable CC3 for is_slm()/is_knl()/is_cnl()/is_ehl() models.
Delete is_cnl()/is_ehl() CPU model checks.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Disable CC7/PC7 for is_bdx() models.
Delete is_bdx() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Disable CC3/CC7/PC3/PC7 for is_skx()/is_icx()/is_spr() models.
Delete is_skx() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Enable CC1 and disable CC3/CC7/PC3/PC7 for is_dnv() models.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Disable CC3/CC7/PC2/PC3/PC6/PC7 for is_jvl() models.
Delete is_jvl() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Disable PC2/PC3/PC7 and enable PC6 for has_slv_msrs() models.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Enable PC3/PC6 for platforms with .cst_limit set because package cstates
are guarded by pkg_cstate_limit.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Add skeleton support for cstate enumeration.
Note that the previous logic may override the cstate setting for
multiple times for different reasons. The conversion to new cstate
enumeration must be done step by step following the previous code
order strictly.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
On some models, the CPU base frequency is different from the TSC
frequency, and the aperf/mperf counters are running at CPU base
frequency instead of TSC frequency.
Abstract support for TSC tweak.
Given that tsc_tweak depends on base_hz, move the code to probe_bclk()
after base_hz is available.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
RAPL probing can be done without family/model checking. Remove these
parameters in rapl probe functions.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Different hardcoded TDP values are used when TDP can not be retrieved
from the hardware.
Abstract hardcoded TDP value.
Delete CPU model checks in get_tdp_intel().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for fixed Dram domain energy unit.
Delete rapl_dram_energy_units_probe() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
INTEL_FAM6_ATOM_SILVERMONT model needs a divisor to convert the raw
Energy Units value from MSR_RAPL_POWER_UNIT.
Abstract the support for RAPL divisor.
Delete CPU model check in rapl_probe_intel().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for RAPL MSRs.
Delete CPU model checks in rapl_probe_intel().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
The support for each RAPL domains, as well as the support for the perf
status of each RAPL domains, can be detected by checking the
availabilities of the corresponding RAPL MSRs.
Change the code accordingly and remove the hardcoded logic for each
model.
Note that this also fixes the INTEL_FAM6_ATOM_TREMONT model, which has
RAPL_PKG_PERF_STATUS and MSR_DRAM_PERF_STATUS but doesn't have BIC_PKG__
and BIC_RAM__ set.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for hardcoded Crystal Clock frequency, which is
used when crystal clock is not available from CPUID.15.
Delete CPU model checks in process_cpuid().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for AUTOMATIC_CSTATE_CONVERSION bit in
MSR_PKG_CST_CONFIG_CONTROL.
Delete automatic_cstate_conversion_probe() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for MSR_CORE/GFX/RING_PERF_LIMIT_REASONS MSRs.
Delete perf_limit_reasons_probe() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for different TCC Offset bits in
MSR_IA32_TEMPERATURE_TARGET.
Delete check_tcc_offset() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for MSR_CONFIG_TDP_NOMINAL/LEVEL_1/LEVEL_2/CONTROL
and MSR_TURBO_ACTIVATION_RATIO.
Delete has_config_tdp() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Rename dump_hsw_turbo_ratio_limits() and dump_ivt_turbo_ratio_limits()
to dump_turbo_ratio_limit2() and dump_turbo_ratio_limit1() because they
dump MSR_TURBO_RATIO_LIMIT1/LIMIT2, and the MSRs' behavior is
consistent when they are available.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for MSR_TURBO_RATIO_LIMIT, MSR_TRUBO_RATIO_LIMIT1,
MSR_TURBO_RATIO_LIMIT2, MSR_SECONDARY_TURBO_RATIO_LIMIT,
MSR_ATOM_CORE_RATIOS and MSR_ATOM_CORE_TURBO_RATIOS.
Delete has_turbo_ratio_group_limits(), has_turbo_ratio_limit(),
has_atom_turbo_ratio_limit(), has_ivt_turbo_ratio_limit(),
has_hsw_turbo_ratio_limit(), has_knl_turbo_ratio_limit() and
has_glm_turbo_ratio_limit() CPU model checks.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Rename dump_nhm_platform_info() and dump_nhm_cst_cfg() to
dump_platform_info() and dump_cst_cfg() because these MSRs' behavior is
consistent when they're available.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Platforms with has_msr_misc_pwr_mgmt set is a subset of platforms with
has_nhm_msrs set.
Thus remove the redudant check for platform->has_nhm_msrs.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
MSR_PLATFORM_INFO, MSR_IA32_TEMPERATURE_TARGET, MSR_SMI_COUNT,
MSR_PKG_CST_CONFIG_CONTROL, and the TRL MSRs are always available for
platforms since Nehalem. Support for these msrs can be described
altogether.
Abstract the support for these MSRs.
Delete probe_nhm_msrs() CPU model check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract the support for decoding package cstate limit from
MSR_PKG_CST_CONFIG_CONTROL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Abstract CPU base clock frequency support.
Note that bclk is used by
1. calculate base_hz using MSR_PLATFORM_INFO, which is guarded by
probe_nhm_msrs().
2. dump MSR_PLATFORM_INFO and Turbo Ratio Limit MSRs, which are also
guarded by probe_nhm_msrs().
Thus probe_bclk() works for probe_nhm_msrs() models only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
