Fix checkpatch whitespace issues since 2024.11.30
Summary of Changes since 2024.11.30:
Enable SysWatt by default.
Add initial PTL, CWF platform support.
Refuse to run on unsupported platforms without --force
to avoid not-so-useful measurements mistakenly made
using obsolete versions.
Harden initial PMT code in response to early use.
Signed-off-by: Len Brown <len.brown@intel.com>
Allow user to add PMT counters by either identifying the source with:
guid=%u,seq=%u
or, since this patch, with direct sysfs path:
path=%s, for example path=/sys/class/intel_pmt/telem5
In the later case, the guid and sequence number will be infered
by turbostat.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some platforms may expose multiple telemetry files identified with the
same GUID. Interpreting it correctly, to associate given counter with a
CPU, core or a package requires more metadata from the user.
Parse and create ordered, linked list of those PMT aggregators, so that
we can identify specific aggregator with GUID + sequence number.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
PMT directories exposed in sysfs use the following pattern:
telem%u
for example:
telem0, telem2, telem3, ..., telem15, telem16
This naming scheme preserves the ordering from the PCIe discovery, which
is important to correctly map the telemetry directory to the specific
domain (cpu, core, package etc).
Because readdir() traverses the entries in alphabetical order, causing
for example "telem13" to be traversed before "telem3", it is necessary
to use scandir() with custom compare() callback to preserve the PCIe
ordering.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
When platforms expose multiple PMT aggregators with the same GUID, the
only way to identify them and map to specific domain is by reading them
in an order they were exposed via PCIe. Intel PMT kernel driver does
keep the same order and numbers the telemetry directories accordingly.
Use GUID and sequence number (order) to uniquely identify PMT
aggregators.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
When requesting PMT counters with --add command, user may want to skip
specifying values for all the domains (that is, cpu, core, package etc).
For the domains that user did not provide information on how to read the
counter, return default value - zero.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
For some MSRs, for example, the Platform Energy Counter (RAPL PSYS), it
is required to additionally check for a non-zero value to confirm that
it is present.
From Intel SDM vol. 4:
Platform Energy Counter (R/O)
This MSR is valid only if both platform vendor hardware
implementation and BIOS enablement support it.
This MSR will read 0 if not valid.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Include procfs and sysfs data collection time in the system summary
row of the "usec" column. This is useful for isolating where the
time goes during turbostat data collection.
Background:
Column "usec" shows
1. the number of microseconds elapsed during counter collection,
including thread migration -- if any, for each CPU row.
2. total elapsed time to collect the counters on all cpus, for the
summary row.
This can be used to check the time cost of a give column. For example,
run below commands separately
turbostat --show usec sleep 1
turbostat --show usec,CoreTmp sleep 1
and the delta in the usec column will tell the time cost for CoreTmp
(Thermal MSR read)
Problem:
Some of the kernel procfs/sysfs accesses are expensive, especially on
high core count systems. "usec" column cannot tell this because it only
includes the time cost of the counters.
Solution:
Leave the per CPU "usec" as it is and modify the summary "usec" to
include the time cost of the procfs/sysfs snapshot.
With it, the "usec" column can be used to get
1. the baseline, e.g.
turbostat --show usec sleep 1
2. the baseline + some per CPU counter cost, e.g.
turbostat --show usec,CoreTmp sleep 1
3. the baseline + some per CPU sysfs cost, e.g.
turbostat --show usec,C1 sleep 1
4. the baseline + /proc/interrupts cost, e.g
turbostat --show usec,IRQ sleep 1
Man-page update is also included.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Intel Sapphire Rapids is an exception and has fixed divisor for RAPL PSYS
counter set to 1.0. Add a platform bit and enable it for SPR.
Reported-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This (the old code) is just not how you round up to a page size.
Noticed on a recent Intel platform. Previous ones must have been
reporting sizes already aligned to a page and so the bug was missed when
testing.
Fixes: f0e4ed752f ("tools/power turbostat: Add early support for PMT counters")
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The counter is present on most supporting Intel platforms and provides
useful data to the user. There is no reason to disable the counter by
default.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add an NMI column, a proper sub-set of the IRQ column.
It would be preferable if the kernel exported
/sys/kernel/irq/NMI/per_cpu_count.
But since we are already forced to parse /proc/interrupts,
noticing which row is the NMI is simple enough.
Suggested-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Turbostat currently exits under the following conditions:
1. When running on non-Intel/AMD/Hygon x86 vendors.
2. When running on Intel models that lack specific platform features.
Introduce a new `--force` parameter that allows turbostat to run on
these unsupported platforms with minimal default feature support. This
provides users with the flexibility to gather basic information even on
unsupported systems.
[lenb: updated warning message text]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Improve the `--help` output of turbostat by standardizing the format
and enhancing readability. The following changes are made to ensure
consistency and clarity in the help message:
1. Use a consistent pattern for each parameter's help message:
- Display the parameter and its input (if any) on the same line,
separated by a space.
- Provide the detailed description on a separate line.
2. Ensure that the first character of each description is in lower-case.
These changes make the help output more uniform and easier to read,
helping users quickly understand the available options and their usage.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Turbostat currently supports x86 processors from Intel, AMD, and Hygon.
The behavior of turbostat on CPUs from other vendors has not been
evaluated and may lead to incorrect or undefined behavior.
Enhance turbostat to exit by default when running on an unsupported CPU
vendor. This ensures that users are aware that their CPU is not
currently supported by turbostat, guiding them to seek support for their
specific hardware through future patches.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Turbostat requires per-platform enabling for Intel CPU models due to
platform-specific features. When running on unsupported Intel CPU
models, turbostat currently operates with limited default features,
which can lead to users unknowingly using an outdated version of the
tool.
Enhance turbostat to exit by default when run on unsupported Intel CPU
models, with a clear message to users, informing them that their CPU
model is not supported and advising them to update to the latest version
of turbostat for full functionality.
[lenb: updated error message wording]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add initial support for ClearwaterForest.
It shares the same features with SierraForest.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add initial support for PantherLake.
It shares the same features with Lunarlake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
since 2024.07.26:
assorted minor bug fixes
assorted platform specific tweaks
initial RAPL PSYS (SysWatt) support
Signed-off-by: Len Brown <len.brown@intel.com>
Introduce the counter as a part of global, platform counters structure.
We open the counter for only one cpu, but otherwise treat it as an
ordinary RAPL counter, allowing for grouped perf read.
The counter is disabled by default, because it's interpretation may
require additional, platform specific information, making it unsuitable
for general use.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add '+' to optstring when early scanning for --no-msr and --no-perf.
It causes option processing to stop as soon as a nonoption argument is
encountered, effectively skipping child's arguments.
Fixes: 3e4048466c ("tools/power turbostat: Add --no-msr option")
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Force the --no-perf early to prevent using it as a source. User asks for
raw values, but perf returns them relative to the opening of the file
descriptor.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
On some machines, the graphics device is enumerated as
/sys/class/drm/card1 instead of /sys/class/drm/card0. The current
implementation does not handle this scenario, resulting in the loss of
graphics C6 residency and frequency information.
Add support for /sys/class/drm/card1, ensuring that turbostat can
retrieve and display the graphics columns for these platforms.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Snapshots of the graphics sysfs knobs are taken based on file
descriptors. To optimize this process, open the files and cache the file
descriptors during the graphics probe phase. As a result, the previously
cached pathnames become redundant and are removed.
This change aims to streamline the code without altering its functionality.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, there is an inconsistency in how graphics sysfs knobs are
accessed: graphics residency sysfs knobs are opened and closed for each
read, while graphics frequency sysfs knobs are opened once and remain
open until turbostat exits. This inconsistency is confusing and adds
unnecessary code complexity.
Consolidate the access method by opening the sysfs files once and
reusing the file pointers for subsequent accesses. This approach
simplifies the code and ensures a consistent method for accessing
graphics sysfs knobs.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The graphics sysfs knobs are read-only, making the use of fflush()
before reading them redundant.
Remove the unnecessary fflush() call.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
In various generations, platforms often share a majority of features,
diverging only in a few specific aspects. The current approach of using
hardcoded values in 'platform_features' structure fails to effectively
represent these divergences.
To improve the description of platform divergence:
1. Each newly introduced 'platform_features' structure must have a base,
typically derived from the previous generation.
2. Platform feature values should be inherited from the base structure
rather than being hardcoded.
This approach ensures a more accurate and maintainable representation of
platform-specific features across different generations.
Converts `adl_features` and `lnl_features` to follow this new scheme.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add initial support for GraniteRapids-D. It shares the same features
with SapphireRapids.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Lunarlake supports CC1/CC6/CC7/PC2/PC6/PC10.
Remove PC3 support on Lunarlake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As ARL shares the same features with ADL/RPL/MTL, now 'arl_features' is
used by Lunarlake platform only.
Rename 'arl_features' to 'lnl_features'.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Similar to ADL/RPL/MTL, ARL supports CC1/CC6/CC7/PC2/PC3/PC6/PC8/PC10.
Add back PC8 support on Arrowlake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Similar to ADL/RPL, MTL support CC1/CC6/CC7/PC2/PC3/PC6/PC8/CP10.
Remove PC7/PC9 support on MTL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Honor --show CPU and --show Core when "topo.num_cpus == 1".
Previously turbostat assumed that on a 1-CPU system, these
columns should never appear.
Honoring these flags makes it easier for several programs
that parse turbostat output.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
parse_cpu_string() parses the string input either from command line or
from /sys/fs/cgroup/cpuset.cpus.effective to get a list of CPUs that
turbostat can run with.
The cpu string returned by /sys/fs/cgroup/cpuset.cpus.effective contains
a trailing '\n', but strtoul() fails to treat this as an error.
That says, for the code below
val = ("\n", NULL, 10);
val returns 0, and errno is also not set.
As a result, CPU0 is erroneously considered as allowed CPU and this
causes failures when turbostat tries to run on CPU0.
get_counters: Could not migrate to CPU 0
...
turbostat: re-initialized with num_cpus 8, allowed_cpus 5
get_counters: Could not migrate to CPU 0
Add a check to return immediately if '\n' or '\0' is detected.
Fixes: 8c3dd2c9e5 ("tools/power/turbostat: Abstrct function for parsing cpu string")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Intel hybrid platforms expose different perf devices for P and E cores.
Instead of one, "/sys/bus/event_source/devices/cpu" device, there are
"/sys/bus/event_source/devices/{cpu_core,cpu_atom}".
This, however makes it more complicated for the user,
because most of the counters are available on both and had to be
handled manually.
This patch allows users to use "virtual" cpu device that is seemingly
translated to cpu_core and cpu_atom perf devices, depending on the type
of a CPU we are opening the counter for.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
If the very first printed column was for a PMT counter of type xtal_time
we would misalign the column header, because we were always printing the
delimiter.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Fix build regression seen when using old gcc-9 compiler.
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Release 2024.07.26:
Enable turbostat extensions to add both perf and PMT
(Intel Platform Monitoring Technology) counters from the cmdline.
Demonstrate PMT access with built-in support for Meteor Lake's Die%c6 counter.
This commit:
Clean up white-space nits introduced since version 2024.05.10
Signed-off-by: Len Brown <len.brown@intel.com>
Some counters, like cpu/cache-misses/, expose and require umask=%x
parameter alongside event=%x in the sysfs perf counter's event file.
This change make sure we parse and use it when opening user added
counters.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add a general description of the user interface for adding PMT
counters with the new --add pmt,... option.
Provide a complete example for requesting two counters.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Provide a definition for metadata that allows reading DC6 residency
counter via PMT and exposes it as a builtin counter.
Note that this residency counter is updated and read via
entirely different mechanisms vs the MSR-based residency counters.
On MTL processors, there are times when Die%c6 will report above 100%.
This is still useful, but don't expect 3 digits of precision...
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Allows users to read Intel PMT (Platform Monitoring Technology)
counters, providing interface similar to one used to add MSR and perf
counters. Because PMT is exposed as a raw MMIO range, without metadata,
user has to supply the necessary information to find and correctly
display the requested counter.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Printing information about the source and value during initialization and
reading of the counter for each cpu, while useful when debugging,
results in too verbose output.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This leaves the stdout cleaner, having only counter data. It makes it
easier for programs to parse the output of turbostat, for example
selftests.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
"After" was missing an "r", nothing to see here.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
We had few lines about the feature, but without any complete examples.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
We had an extra "+" at the beginning of some lines that look like a
poorly formated patch.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
User can now read perf counters using "--add perf/<device>/<event>".
Other details work similarly to how --add works with MSRs.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
These three counters now are treated similar to other perf counters
groups. This simplifies and gets rid of a lot of special cases for APERF
and MPERF.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
It makes it harder to shoot yourself in the foot, by using
additional __must_be_array() check.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Reuse the enum. It means the same thing in both cases.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
fd_perf field used to be part of the union, but later moved out of it,
because we test it with fd_perf != -1 to determine if any perf counter
is opened, making the union unused.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
New CPU #defines encode vendor and family as well as model.
N.B. Copied VFM_*() defines here from <asm/cpu_device_id.h> to avoid
an application picking a second internal kernel header file.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Commit 78464d7681 ("tools/power turbostat: Add columns for clustered
uncore frequency") introduced 'probe_intel_uncore_frequency_cluster()'
in a way which prevents printing uncore frequency columns if either of
the '-q' or '-l' options are used. Systems which do not have multiple
uncore frequencies per package are unaffected by this regression.
Fix the function so that uncore frequency columns are shown when either
the '-l' or '-q' option is used by checking if 'quiet' is true after
adding counters for the uncore frequency columns.
Fixes: 78464d7681 ("tools/power turbostat: Add columns for clustered uncore frequency")
Signed-off-by: Adam Hawley <adam.james.hawley@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
In some cases specifying the '-n' command line argument will cause
turbostat to fail. For instance 'turbostat -n 1' works fine; however,
'turbostat -n 1 -d' will fail. This is the result of the first call
to getopt_long_only() where "MP" is specified as the optstring. This can
be easily fixed by changing the optstring from "MP" to "MPn:" to remove
ambiguity between the arguments.
tools/power turbostat: option '-n' is ambiguous; possibilities: '-num_iterations' '-no-msr' '-no-perf'
Fixes: a0e86c90b8 ("tools/power turbostat: Add --no-perf option")
Signed-off-by: David Arcari <darcari@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
New since 2024.04.08:
Len Brown (6):
tools/power turbostat: Add "snapshot:" Makefile target
tools/power turbostat: Harden probe_intel_uncore_frequency()
tools/power turbostat: Remember global max_die_id
tools/power turbostat: Survive sparse die_id
tools/power turbostat: Add columns for clustered uncore frequency
tools/power turbostat: version 2024.05.10
Patryk Wlazlyn (7):
tools/power turbostat: Replace _Static_assert with BUILD_BUG_ON
tools/power turbostat: Enable non-privileged users to read sysfs counters
tools/power turbostat: Avoid possible memory corruption due to sparse topology IDs
tools/power turbostat: Read Core-cstates via perf
tools/power turbostat: Read Package-cstates via perf
tools/power turbostat: Fix order of strings in pkg_cstate_limit_strings
tools/power turbostat: Ignore pkg_cstate_limit when it is not available
Zhang Rui (2):
tools/power turbostat: Enhance ARL/LNL support
tools/power turbostat: Add ARL-H support
Signed-off-by: Len Brown <len.brown@intel.com>
When running in no-msr mode, the pkg_cstate_limit is not populated, thus
we use perf to determine if given pcstate counter is present on the
platform.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Change the order so that it matches the indexes defined in:
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Reading the counters via perf can be done in bulk with a single syscall,
making the counter values more accurate with respect to one another by
minimizing the time gap between individual counter reads.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Reading the counters via perf can be done in bulk with a single syscall,
making the counter values more accurate with respect to one another by
minimizing the time gap between individual counter reads.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Save the highest core and package id when parsing topology to
allocate enough memory when get_rapl_counters() is called with a core or
a package id as a domain.
Note that RAPL domains are per-package on Intel, but per-core on AMD.
Thus, the RAPL code effectively runs in different modes on those two
product lines.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
New machines have multiple uncore frequencies per package,
visible in /sys/devices/system/cpu/intel_uncore_frequency/uncore##/
turbostat now samples these frequencies each measurement interval.
For each package, turbostat now prints "UMHzX.Y" columns,
where X = domain_id, and Y = fabric_cluster_id.
The system summary for each UMHzX.Y column is the average value
for across all of the packages in the system.
Signed-off-by: Len Brown <len.brown@intel.com>
A group of counters called "sysfs" displays software
C-state request counts and resulting perceived C-state residency.
They are not built-in counters that turbostat knows about ahead of time,
rather they are discovered in sysfs when turbostat starts.
Thus, they are added dynamically, using the same interface
as user-added MSR counters.
When turbostat enters "no-msr" mode, such as when running as a
non-privileged user, it clears all added counters.
Updating that to clear only actual MSR added counters
allows regular users to see the sysfs counters.
[lenb: commit message]
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add turbostat support for ARL-H, which behaves the same as ARL.
[lenb: also add ARL-U]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
ARL/LNL don't have PC8, other than that, it behaves the same as CNL.
Copy cnl_features for ARL/LNL, except that PC8 support is removed.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Turbostat assumed that every package had a die_id = 0.
When this assumption was violated, it exited
when looking for the package uncore frequency:
turbostat: /sys/.../intel_uncore_frequency/package_01_die_00/current_freq_khz: open failed: No such file or directory
Signed-off-by: Len Brown <len.brown@intel.com>
If sysfs directory "intel_uncore_frequency/cluster00/" exists,
then use uncore cluster code (now its own routine).
The previous check for
"intel_uncore_frequency/package_00_die_00/current_freq_khz",
could be unreliable in the face of sparse die id's.
Signed-off-by: Len Brown <len.brown@intel.com>
Kernel developers often need to diagnose remote customer systems
with the latest turbostat, yet customers are running binary distros
with out-dated turbostat and the customer has no experience
cloning linux kernel trees.
Add a turbostat "snapshot" makefile target to create a standalone
source snapshot from the developer's git tree, appropriately hacked
so that the customer can build turbostat without a kernel tree.
Include the turbostat binary in the snapshot, for convenience in
those situations where the source and destination are trusted,
(and have new enough glibc to execute).
The snapshot is named with the date it was taken rather than
the turbostat VERSION, as it could occur between VERSIONS...
Signed-off-by: Len Brown <len.brown@intel.com>
Much of turbostat can now run with perf, rather than using the MSR driver
Some of turbostat can now run as a regular non-root user.
Add some new output columns for some new GFX hardware.
[This patch updates the version, but otherwise changes no function;
it touches up some checkpatch issues from previous patches]
Signed-off-by: Len Brown <len.brown@intel.com>
Xe graphics driver uses different graphics sysfs knobs including
/sys/class/drm/card0/device/tile0/gt0/gtidle/idle_residency_ms
/sys/class/drm/card0/device/tile0/gt0/freq0/cur_freq
/sys/class/drm/card0/device/tile0/gt0/freq0/act_freq
/sys/class/drm/card0/device/tile0/gt1/gtidle/idle_residency_ms
/sys/class/drm/card0/device/tile0/gt1/freq0/cur_freq
/sys/class/drm/card0/device/tile0/gt1/freq0/act_freq
Plus that,
/sys/class/drm/card0/device/tile0/gt<n>/gtidle/name
returns either gt<n>-rc or gt<n>-mc. rc is for GFX and mc is SA Media.
Enhance turbostat to prefer the Xe sysfs knobs when they are available.
Export gt<n>-rc via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt<n>-mc via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
On Meteorlake platform, i915 driver supports the traditional graphics
sysfs knobs including
/sys/class/drm/card0/power/rc6_residency_ms
/sys/class/drm/card0/gt_cur_freq_mhz
/sys/class/drm/card0/gt_act_freq_mhz
At the same time, it also supports
/sys/class/drm/card0/gt/gt0/rc6_residency_ms
/sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz
/sys/class/drm/card0/gt/gt0/rps_act_freq_mhz
/sys/class/drm/card0/gt/gt1/rc6_residency_ms
/sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz
/sys/class/drm/card0/gt/gt1/rps_act_freq_mhz
gt0 is for GFX and gt1 is for SA Media.
Enhance turbostat to prefer the i915 new sysfs knobs.
Export gt0 via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt1 via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Graphics driver (i915/Xe) on mordern platforms splits GFX and SA Media
information via different sysfs knobs.
Existing BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz columns can be reused for
GFX.
Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz columns for SA Media.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Running turbostat on a 16 socket HPE Scale-up Compute 3200 (SapphireRapids) fails with:
turbostat: /sys/devices/system/cpu/intel_uncore_frequency/package_010_die_00/current_freq_khz: open failed: No such file or directory
We observe the sysfs uncore frequency directories named:
...
package_09_die_00/
package_10_die_00/
package_11_die_00/
...
package_15_die_00/
The culprit is an incorrect sprintf format string "package_0%d_die_0%d" used
with each instance of reading uncore frequency files. uncore-frequency-common.c
creates the sysfs directory with the format "package_%02d_die_%02d". Once the
package value reaches double digits, the formats diverge.
Change each instance of "package_0%d_die_0%d" to "package_%02d_die_%02d".
[lenb: deleted the probe part of this patch, as it was already fixed]
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Graphics sysfs snapshots share similar logic.
Combine them into one function to avoid code duplication.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Graphics drivers (i915/Xe) have different sysfs knobs on different
platforms, and it is possible that different sysfs knobs fit into the
same turbostat columns.
Instead of specifying different sysfs knobs every time, detect them
once and cache the path for future use.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some of the future Intel platforms will require reading the RAPL
counters via perf and not MSR. On current platforms we can still read
them using both ways.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
If user request --no-msr or is not able to access the MSRs,
turbostat should clear all the counters added with --add.
Because MSR access permission checks are done after the cmdline is
parsed, the decision has to be defered up until the transition into
no-msr mode happen.
Signed-off-by: Len Brown <len.brown@intel.com>
Checking early if the permissions are even needed gets rid of the
warnings about some of them missing. Earlier we issued a warning in case
of missing MSR and/or perf permissions, even when user never asked for
counters that require those.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
To allow unprivileged user to run turbostat seamlessly.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
By using the perf API we spend less time in between the reads of the
counters, resulting in more accurate calculations of the dependent
metrics.
Using perf API is also usually faster overall, although cache miss, if
we get one, is more costly when using perf vs MSR driver.
We would fallback to the msr reads if the sysfs isn't there or when in
--no-perf mode.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add the --no-perf option to allow users to run turbostat without
accessing perf.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add --no-msr option to allow users to run turbostat without
accessing MSRs via the MSR driver.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Eliminate redundant debug output for core and package scope counters.
Include name and path for all "ADDED" counters.
Signed-off-by: Len Brown <len.brown@intel.com>
Previously a failed read of /dev/cpu_dma_latency erroneously complained
turbostat: capget(CAP_SYS_ADMIN) failed, try "# setcap cap_sys_admin=ep ./turbostat
This went unnoticed because this file is typically visible to root,
and turbostat was typically run as root.
Going forward, when a non-root user can run turbostat...
Complain about failed read access to this file only if --debug is used.
Signed-off-by: Len Brown <len.brown@intel.com>
If MSRs cannot be read, values can be obtained from cpuid.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
If the MSR read were to fail, turbostat would print "microcode 0x0"
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Print current frequency along with the current (and initial) limits
Probe and print uncore config also for machines using the new cluster API
Signed-off-by: Len Brown <len.brown@intel.com>
turbostat prints the abnormal SYS%LPI across suspend-to-idle:
SYS%LPI = 114479815993277.50
This is reproduced by:
Run a freeze cycle, e.g. "sleepgraph -m freeze -rtcwake 15".
Then do a reboot. After boot up, launch the suspend-idle-idle
and check the SYS%LPI field.
The slp_so residence counter is in LPIT table, and BIOS does not
clears this register across reset. The PMC expects the OS to calculate
the LPI residency based on the delta. However, there is an firmware
issue that the LPIT gets cleared to 0 during the second suspend
to idle after the reboot, which brings negative delta value.
[lenb: updated to print "neg" upon this BIOS failure]
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The code calculates Bzy_MHz by multiplying TSC_delta * APERF_delta/MPERF_delta
The man page erroneously showed that TSC_delta was divided.
Signed-off-by: Peng Liu <liupeng17@lenovo.com>
Signed-off-by: Len Brown <len.brown@intel.com>
When running turbostat, a system with 512 cpus reaches the limit for
maximum number of file descriptors that can be opened. To solve this
problem, the limit is raised to 2^15, which is a large enough number.
Below data is collected from AMD server systems while running turbostat:
|-----------+-------------------------------|
| # of cpus | # of opened fds for turbostat |
|-----------+-------------------------------|
| 128 | 260 |
|-----------+-------------------------------|
| 192 | 388 |
|-----------+-------------------------------|
| 512 | 1028 |
|-----------+-------------------------------|
So, the new max limit would be sufficient up to 2^14 cpus (but this
also depends on how many counters are enabled).
Reviewed-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Turbostat features are now table-driven (Rui Zhang)
Add support for some new platforms (Sumeet Pawnikar, Rui Zhang)
Gracefully run in configs when CPUs are limited (Rui Zhang, Srinivas Pandruvada)
misc minor fixes.
Signed-off-by: Len Brown <len.brown@intel.com>
turbostat --show IPC
displays "inf" for the IPC column
turbostat was missing the explicit dependency of IPC on APERF,
and thus neglected to collect APERF when only IPC was requested.
typcial use:
turbostat --quiet --show CPU,IPC
Signed-off-by: Len Brown <len.brown@intel.com>
