Test "Setup struct perf_event_attr" consists of multiple test cases that
can affect the max sample rate value for perf events. Some test cases
check this value as it should not be lowered under the set minimum for
the given test. Currently, it is possible for the test cases to affect
each other as the previous tests can lower the sample rate, leading to
a possible failure of some of the future test cases as the value is not
restored at any point.
# 10: Setup struct perf_event_attr:
--- start ---
test child forked, pid 104220
Using CPUID 0x00000000413fd0c1
running './tests/attr/test-record-C0'
Current sample rate: 10000
running './tests/attr/test-record-basic'
Current sample rate: 900
running './tests/attr/test-record-branch-any'
Current sample rate: 600
running './tests/attr/test-record-dummy-C0'
Current sample rate: 600
expected sample_period=4000, got 600
FAILED './tests/attr/test-record-dummy-C0' - match failure
Restore the max sample rate value for perf events to a reasonable value
before each test case if its value was lowered too much to ensure the
same conditions for each test case.
# 10: Setup struct perf_event_attr:
--- start ---
test child forked, pid 107222
Using CPUID 0x00000000413fd0c1
running './tests/attr/test-record-C0'
Current sample rate: 10000
running './tests/attr/test-record-basic'
Current sample rate: 800
running './tests/attr/test-record-branch-any'
Current sample rate: 700
unsupp './tests/attr/test-record-branch-any'
running './tests/attr/test-record-branch-filter-any'
Current sample rate: 10000
running './tests/attr/test-record-count'
Current sample rate: 10000
running './tests/attr/test-record-data'
Current sample rate: 600
running './tests/attr/test-record-dummy-C0'
Current sample rate: 800
running './tests/attr/test-record-freq'
Current sample rate: 10000
...
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Radostin Stoyanov <rstoyano@redhat.com>
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241003125136.15918-1-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Command perf test 86 fails on s390:
# perf test -F 86
ping 868299 [007] 28248.013596: probe_libc:inet_pton_1: (3ff95948020)
3ff95948020 inet_pton+0x0 (inlined)
3ff9595e6e7 text_to_binary_address+0x1007 (inlined)
3ff9595e6e7 gaih_inet+0x1007 (inlined)
FAIL: expected backtrace entry \
"main\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$"
got "3ff9595e6e7 gaih_inet+0x1007 (inlined)"
86: probe libc's inet_pton & backtrace it with ping : FAILED!
#
The root cause is a new stack layout, two functions have been added
as seen below.
# perf script | tac | grep -m1 '^ping' -B9 | tac
ping 866856 [007] 25979.494921: probe_libc:inet_pton: (3ff8ec48020)
3ff8ec48020 inet_pton+0x0 (inlined)
new --> 3ff8ec5e6e7 text_to_binary_address+0x1007 (inlined)
new --> 3ff8ec5e6e7 gaih_inet+0x1007 (inlined)
3ff8ec5e6e7 getaddrinfo+0x1007 (/usr/lib64/libc.so.6)
2aa3fe04bf5 main+0xff5 (/usr/bin/ping)
3ff8eb34a5b __libc_start_call_main+0x8b (/usr/lib64/libc.so.6)
3ff8eb34b5d __libc_start_main@GLIBC_2.2+0xad (inlined)
2aa3fe06a1f [unknown] (/usr/bin/ping)
#
The new functions in the call chain are:
- text_to_binary_address()
- gaih_inet().
Both functions are inlined and do not show up in the output
of the nm command:
# nm -a /usr/lib64/libc.so.6 | \
grep -E '(text_to_binary_address|gaih_inet)$'
#
There is no possibility to add these 2 functions depending on their
existance in the C library.
Add text_to_binary_address() and gaih_inet() to the list of
expected functions in an compatible way and extend the regular
expression. On s390 the backtrace can now be
Before After
probe_libc:inet_pton probe_libc:inet_pton
inet_pton inet_pton
getaddrinfo getaddrinfo | text_to_binary_address
main main | gaih_inet
Output after:
# perf test -F 86
86: probe libc's inet_pton & backtrace it with ping : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: agordeev@linux.ibm.com
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Link: https://lore.kernel.org/r/20241001124224.3370306-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The "perf record" tool will now default to this new mode if the user
specifies a sampling group when not in system-wide mode, and when
"--no-inherit" is not specified.
This change updates evsel to allow the combination of inherit
and PERF_SAMPLE_READ.
A fallback is implemented for kernel versions where this feature is not
supported.
Signed-off-by: Ben Gainey <ben.gainey@arm.com>
Cc: james.clark@arm.com
Link: https://lore.kernel.org/r/20241001121505.1009685-3-ben.gainey@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Clean up return value to be TEST_* rather than unspecific integer. Add
test case skip reason. Skip test if EACCES comes back from
evsel__newtp.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241001052327.7052-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Clean up return value to be TEST_* rather than unspecific integer. Add
test case skip reason. Skip test if EACCES comes back from
evsel__newtp.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241001052327.7052-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
These error paths occur without sufficient permissions. Fix the memory
leaks to make leak sanitizer happier.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20241001052327.7052-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add more test cases to cover all supported topdown events regroup cases.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-7-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add counting and leader sampling tests to verify topdown events including
raw format can be reordered correctly.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-6-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add leader sampling test to validate event counts are captured into
record and the count value is consistent.
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-5-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf test 70 takes a long time. One culprit is the output of command
perf annotate. Per default enabled are
- demangle symbol names
- interleave source code with assembly code.
Disable demangle of symbols and abort the annotation
after the first 250 lines.
This speeds up the test case considerable, for example
on s390:
Output before:
# time perf test 70
70: perf annotate basic tests : Ok
.....
real 2m7.467s
user 1m26.869s
sys 0m34.086s
#
Output after:
# time perf test 70
70: perf annotate basic tests : Ok
real 0m3.341s
user 0m1.606s
sys 0m0.362s
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: sumanthk@linux.ibm.com
Link: https://lore.kernel.org/r/20240917085706.249691-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Test that one cycles event is opened for each core PMU when "perf stat"
is run without arguments.
The event line can either be output as "pmu/cycles/" or just "cycles" if
there is only one PMU. Include 2 spaces for padding in the one PMU case
to avoid matching when the word cycles is included in metric
descriptions.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-8-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
PMUs aren't listed in /sys/devices/ on DT devices, so change the search
directory to /sys/bus/event_source/devices which works everywhere. Also
add armv8_cortex_* as a known PMU type to search for to make the test
run on more devices.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-7-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
"evsel->pmu_name" is only ever assigned a strdup of "pmu->name", a
strdup of "evsel->pmu_name" or NULL. As such, prefer to use
"pmu->name" directly and even to directly compare PMUs than PMU
names. For safety, add some additional NULL tests.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
[ Fix arm-spe.c usage of pmu_name and empty PMU name ]
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-6-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Without aggregation on Intel:
```
$ perf stat -e instructions,cycles ...
```
Will use "cycles" for the name of the legacy cycles event but as
"instructions" has a sysfs name it will and a "[cpu]" PMU suffix. This
often breaks things as the space between the event and the PMU name
look like an extra column. The existing uniquify logic was also
uniquifying in cases when all events are core and not with uncore
events, it was not correctly handling modifiers, etc.
Change the logic so that an initial pass that can disable
uniquification is run. For individual counters, disable uniquification
in more cases such as for consistency with legacy events or for
libpfm4 events. Don't use the "[pmu]" style suffix in uniquification,
always use "pmu/.../". Change how modifiers/terms are handled in the
uniquification so that they look like parse-able events.
This fixes "102: perf stat metrics (shadow stat) test:" that has been
failing due to "instructions [cpu]" breaking its column/awk logic when
values aren't aggregated. This started happening when instructions
could match a sysfs rather than a legacy event, so the fixes tag
reflects this.
Fixes: 617824a7f0 ("perf parse-events: Prefer sysfs/JSON hardware events over legacy")
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
[ Fix Intel TPEBS counting mode test ]
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: ak@linux.intel.com
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240926144851.245903-3-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Refactor code to have some more error diagnosis on traps, etc. and to
do less work on each line. Add an ignore situation for security failures.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240925173013.12789-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Run a few samples through the disassembly script and check to see that
at least one branch instruction is printed.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ruidong Tian <tianruidong@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Cc: John Garry <john.g.garry@oracle.com>
Cc: scclevenger@os.amperecomputing.com
Link: https://lore.kernel.org/r/20240916135743.1490403-8-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Previously "set -e" meant any non-zero exit code from perf stat would
cause a test failure. As a non-zero exit happens when there aren't
sufficient permissions, check for this case and make the exit code
2/skip for it.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20240502223115.2357499-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Rather than passing a fake PMU around, just pass that the fake PMU
should be used - true when doing testing. Move the fake PMU into
pmus.[ch] and try to abstract the PMU's properties in pmu.c, ie so
there is less "if fake_pmu" in non-PMU code. Give the fake PMU a made
up type number.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Clément Le Goffic <clement.legoffic@foss.st.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xu Yang <xu.yang_2@nxp.com>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240907050830.6752-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas reported the vfs_getname perf tests failing on s/390, it seems it
was just to some extraneous '=' somehow getting into the regexp, remove
it, now:
root@x1:~# perf test getname
91: Add vfs_getname probe to get syscall args filenames : Ok
93: Use vfs_getname probe to get syscall args filenames : FAILED!
126: Check open filename arg using perf trace + vfs_getname : Ok
root@x1:~#
Second one remains a mistery, have to take some time to nail it down.
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>,
Link: https://lore.kernel.org/lkml/1d7f3b7b-9edc-4d90-955c-9345428563f1@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The header files parse-events.h is included twice in parse-events.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10822
Link: https://lore.kernel.org/r/20240910005522.35994-1-yang.lee@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -B option that lazily inserts mmap2 events thereby dropping all
mmap events without samples. This is similar to the behavior of -b
where only build_id events are inserted when a dso is accessed in a
sample.
File size savings can be significant in system-wide mode, consider:
$ perf record -g -a -o perf.data sleep 1
$ perf inject -B -i perf.data -o perf.new.data
$ ls -al perf.data perf.new.data
5147049 perf.data
2248493 perf.new.data
Give test coverage of the new option in pipe test.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Link: https://lore.kernel.org/r/20240909203740.143492-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option that allows all mmap or mmap2 events to be rewritten as
mmap2 events with build IDs.
This is similar to the existing -b/--build-ids and --buildid-all options
except instead of adding a build_id event an existing mmap/mmap2 event
is used as a template and a new mmap2 event synthesized from it.
As mmap2 events are typical this avoids the insertion of build_id
events.
Add test coverage to the pipe test.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Link: https://lore.kernel.org/r/20240909203740.143492-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In probe_vfs_getname.sh, current we use "perf record --dry-run"
to check for libtraceevent and skip the test if perf is not
build with libtraceevent. Change the check to use "perf check feature"
option
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240904190132.415212-6-adityag@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we use output of 'perf version --build-options', to check
whether perf was built with libtraceevent support.
Instead, use 'perf check feature libtraceevent' to check for
libtraceevent support.
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240904190132.415212-5-adityag@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default breakpoint length is "sizeof(long)" however this is
incorrect on platforms like Aarch64 where sizeof(long) is 8 but the
breakpoint length is 4. Add a helper function that can be used to
determine the correct breakpoint length, in this change it just
returns the existing default sizeof(long) value.
Use the helper in the bp_account test so that, when modifying the
event from a watchpoint to a breakpoint, the breakpoint length is
appropriate for the architecture and not just sizeof(long).
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240904050606.752788-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
i386 only supports watchpoints up to size 4, 8 bytes causes extra
counts and test failures.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240831070415.506194-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The probe command is dependent on libelf. Skip the test if the
required probe command isn't present.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240831070415.506194-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to the existing support for libbfd and calling out to
an external addr2line command, add support for using libllvm directly.
This is both faster than libbfd, and can be enabled in distro builds
(the LLVM license has an explicit provision for GPLv2 compatibility).
Thus, it is set as the primary choice if available.
As an example, running 'perf report' on a medium-size profile with
DWARF-based backtraces took 58 seconds with LLVM, 78 seconds with
libbfd, 153 seconds with external llvm-addr2line, and I got tired and
aborted the test after waiting for 55 minutes with external bfd
addr2line (which is the default for perf as compiled by distributions
today).
Evidently, for this case, the bfd addr2line process needs 18 seconds (on
a 5.2 GHz Zen 3) to load the .debug ELF in question, hits the 1-second
timeout and gets killed during initialization, getting restarted anew
every time. Having an in-process addr2line makes this much more robust.
As future extensions, libllvm can be used in many other places where
we currently use libbfd or other libraries:
- Symbol enumeration (in particular, for PE binaries).
- Demangling (including non-Itanium demangling, e.g. Microsoft
or Rust).
- Disassembling (perf annotate).
However, these are much less pressing; most people don't profile PE
binaries, and perf has non-bfd paths for ELF. The same with demangling;
the default _cxa_demangle path works fine for most users, and while bfd
objdump can be slow on large binaries, it is possible to use
--objdump=llvm-objdump to get the speed benefits. (It appears
LLVM-based demangling is very simple, should we want that.)
Tested with LLVM 14, 15, 16, 18 and 19. For some reason, LLVM 12 was not
correctly detected using feature_check, and thus was not tested.
Committer notes:
Added the name and a __maybe_unused to address:
1 13.50 almalinux:8 : FAIL gcc version 8.5.0 20210514 (Red Hat 8.5.0-22) (GCC)
util/srcline.c: In function 'dso__free_a2l':
util/srcline.c:184:20: error: parameter name omitted
void dso__free_a2l(struct dso *)
^~~~~~~~~~~~
make[3]: *** [/git/perf-6.11.0-rc3/tools/build/Makefile.build:158: util] Error 2
Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240803152008.2818485-1-sesse@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Additional pipe tests where piped files are written to disk. This
means that spotting a file name of "-" isn't a sufficient "is pipe?"
test.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240829150154.37929-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ sudo ./perf test filtering -vv
96: perf record sample filtering (by BPF) tests:
--- start ---
test child forked, pid 2966908
Checking BPF-filter privilege
Basic bpf-filter test
Basic bpf-filter test [Success]
Failing bpf-filter test
Failing bpf-filter test [Success]
Group bpf-filter test
Group bpf-filter test [Success]
Multiple bpf-filter test
Multiple bpf-filter test [Success]
Cgroup bpf-filter test
Cgroup bpf-filter test [Success]
---- end(0) ----
96: perf record sample filtering (by BPF) tests : Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240826221045.1202305-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Shellcheck versions < v0.7.2 can't follow this path so add the helper to
fix the following warning:
In tests/shell/trace_btf_enum.sh line 13:
. "$(dirname $0)"/lib/probe.sh
^--------------------------^ SC1090: Can't follow non-constant source.
Use a directive to specify location.
Fixes: d66763fed3 ("perf test trace_btf_enum: Add regression test for the BTF augmentation of enums in 'perf trace'")
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240809095426.3065163-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new 'perf report' test case that acts as an entry element in 'perf
test list'.
Runs multiple subtests from directory "base_report", which can be
expanded without further editing.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-12-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test basic execution and some options of perf-report subcommand, like
show-nr-samples, header, showcpuutilization, pid and symbol filtering.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-11-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As a form of validation, it is a common practice to check the outputs
of commands whether they contain expected patterns or match a certain
regular expression.
This output checking helper is designed to allow checking stderr output
of perf commands for unexpected messages, while ignoring messages that
are known to be harmless, e.g.:
"Lowering default frequency rate to \d+\."
"\d+ out of order events recorded."
etc.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-10-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf-probe command uses a specific semantics to describe probes.
Test some patterns that are known to be both valid and invalid if
they are handled appropriately.
This test is run as a part of perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-9-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test if various incompatible options are correctly handled-rejected.
It is run as a part of perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-8-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test basic behavior of perf-probe subcommand. It is run as a part of
perftool-testsuite_probe test case.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-7-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test perf probe interface. Blacklisted functions should be rejected
when there is an attempt to set a kprobe to them.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-6-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Shellcheck is becoming a standard when building perf to prevent
any unnecessary mistakes. Fix shellcheck warnings in perf testsuite.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-5-vmolnaro@redhat.com
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test scripts in base_* directories currently have their own drivers
that run them. Before this patch, the shell test-suite generator causes
them to run twice. Fix that by skipping them in the generator.
A cleaner solution (for future) will be to use the directory structure
idea (introduced by Carsten Haitzler in 7391db6459 ("perf test:
Refactor shell tests allowing subdirs")) to generate test entries with
subtests, like:
$ perf test list
[...]
97: perf probe shell tests
97:1: perf probe basic functionality
97:2: perf probe tests with arguments
97:3: perf probe invalid options handling
[...]
There is already a lot of shell test scripts and many are about to come,
so there is a need for some hierarchy.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240702110849.31904-3-vmolnaro@redhat.com
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The getname_flags() routine changed recently and thus the place where we
were getting the pathname is not probeable anymore, albeit still
present, so use the next line for that, before:
root@number:/home/acme/git/perf-tools-next# perf test vfs_getname
91: Add vfs_getname probe to get syscall args filenames : FAILED!
93: Use vfs_getname probe to get syscall args filenames : FAILED!
126: Check open filename arg using perf trace + vfs_getname : FAILED!
root@number:/home/acme/git/perf-tools-next#
Now tests 91 and 126 are passing, some more investigation is needed for
test 93, that continues to fail.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add Multiple bpf-filter test for two or more events with filters.
It uses task-clock and page-faults events with different filter
expressions and check the perf script output
$ sudo ./perf test filtering -vv
96: perf record sample filtering (by BPF) tests:
--- start ---
test child forked, pid 2804025
Checking BPF-filter privilege
Basic bpf-filter test
Basic bpf-filter test [Success]
Failing bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Failing bpf-filter test [Success]
Group bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Error: task-clock event does not have PERF_SAMPLE_CODE_PAGE_SIZE
Group bpf-filter test [Success]
Multiple bpf-filter test
Multiple bpf-filter test [Success]
---- end(0) ----
96: perf record sample filtering (by BPF) tests : Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240820154504.128923-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend the searching for the test files so that it works when running
perf from a separate objdir, and also when the perf executable is
symlinked.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240813213651.1057362-2-ak@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add it to the record.sh shell test to verify if it tracks cgroup
information correctly. It records with --all-cgroups option can check
if it has PERF_RECORD_CGROUP and the names are not "unknown".
$ sudo ./perf test -vv 95
95: perf record tests:
--- start ---
test child forked, pid 2871922
169c90-169cd0 g test_loop
perf does have symbol 'test_loop'
Basic --per-thread mode test
Basic --per-thread mode test [Success]
Register capture test
Register capture test [Success]
Basic --system-wide mode test
Basic --system-wide mode test [Success]
Basic target workload test
Basic target workload test [Success]
Branch counter test
branch counter feature not supported on all core PMUs (/sys/bus/event_source/devices/cpu) [Skipped]
Cgroup sampling test
Cgroup sampling test [Success]
---- end(0) ----
95: perf record tests : Ok
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240818212948.2873156-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test recording of call-graphs and injecting --build-all. Add/expand
trap handler.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
map__init() is only used internally so make it static. Assume memory is
zero initialized, which will better support adding fields to struct
map in the future and was already the case for map__new2.
To reduce complexity, change set_priv and set_erange_warned to not take
a value to assign as they always assign true.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Casey Chen <cachen@purestorage.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yunseong Kim <yskelg@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Link: https://lore.kernel.org/r/20240817064442.2152089-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Subtest for system-wide record with '--threads=cpu' option fails due
to a limit of open file descriptors on systems with 128 or more CPUs
as the default limit is set to 1024.
The number of open file descriptors should be slightly above
nmb_events*nmb_cpus + nmb_cpus(for perf.data.n) + 4*nmb_cpus(for pipes),
which equals 8*nmb_cpus. Therefore, temporarily raise the limit to
16*nmb_cpus for the test.
Committer notes:
Instead of disabling ShellCheck warnings all the uses of 'uname -n',
i.e. those:
In tests/shell/record.sh line 35:
default_fd_limit=$(ulimit -Sn)
^-^ SC3045 (warning): In POSIX sh, ulimit -S is undefined.
We can just switch from using '/bin/sh' to '/bin/bash' for this test, as
bash _has_ 'ulimit -n', so ShellCheck will not emit that warning.
There are dozens of 'perf test' shell tests that do just that,
'/bin/bash' is a reasonable expectation for those tests.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Radostin Stoyanov <rstoyano@redhat.com>
Link: https://lore.kernel.org/linux-perf-users/20240429085721.10122-1-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enhance the test case for the branch counter feature.
Now, the test verifies:
- The new filter can be successfully applied on the supported platforms.
- The counter value can be outputted via the perf report -D
- The counter value and the abbr name can be outputted via the
perf script (New)
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240813160208.2493643-10-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Help to better identify the location of test failures but dumping the
failing test in the trap handler.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240813040613.882075-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel TPEBS sampling mode is supported through perf record. The counting mode
code uses perf record to capture retire_latency value and use it in metric
calculation. This test checks the counting mode code on Intel platforms.
Committer testing:
root@x1:~# perf test tpebs
123: test Intel TPEBS counting mode : Ok
root@x1:~# set -o vi
root@x1:~# perf test tpebs
123: test Intel TPEBS counting mode : Ok
root@x1:~# perf test -v tpebs
123: test Intel TPEBS counting mode : Ok
root@x1:~# perf test -vvv tpebs
123: test Intel TPEBS counting mode:
--- start ---
test child forked, pid 16603
Testing without --record-tpebs
Testing with --record-tpebs
---- end(0) ----
123: test Intel TPEBS counting mode : Ok
root@x1:~#
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Link: https://lore.kernel.org/r/20240720062102.444578-9-weilin.wang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ensure tool is initialized to avoid lazy initialization pattern so
that more uses of struct perf_tool can be made const.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240812204720.631678-25-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tool pointer (to a struct largely of function pointers) is passed
around but is unchanged except at initialization. Change parameter and
variable types to be const to lower the possibilities of what could
happen with a tool.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240812204720.631678-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of explicitely initializing just the .name and .alias_name,
use struct member named initialization of just the non-null -name field,
the compiler will initialize all the other non-explicitely initialized
fields to NULL.
This makes the code more robust, avoiding the error recently fixed when
the .alias_name was used and contained a random value.
Reviewed-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Radostin Stoyanov <rstoyano@redhat.com>
Link: https://lore.kernel.org/lkml/e26941f9-f86c-4f2e-b812-20c49fb2c0d3@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running on a:
root@x1:~# grep 'model name' -m1 /proc/cpuinfo
model name : 13th Gen Intel(R) Core(TM) i7-1365U
root@x1:~#
It skips all the tests with:
root@x1:~# perf test -vvvv LBR
97: perf record LBR tests:
--- start ---
test child forked, pid 2033388
Skip: only x86 CPUs support LBR
---- end(-2) ----
97: perf record LBR tests : Skip
root@x1:~#
Because the test checks for the /sys/devices/cpu/caps/branches file,
that isn't present as we have instead:
root@x1:~# ls -la /sys/devices/cpu*/caps/branches
-r--r--r--. 1 root root 4096 Aug 8 11:22 /sys/devices/cpu_atom/caps/branches
-r--r--r--. 1 root root 4096 Aug 8 11:21 /sys/devices/cpu_core/caps/branches
root@x1:~#
If we check as well for one of those,
/sys/devices/cpu_core/caps/branches, then we don't skip the tests and
all are run on these x86 Intel Hybrid systems as well, passing all of
them:
root@x1:~# perf test -vvvv LBR
97: perf record LBR tests:
--- start ---
test child forked, pid 2034956
LBR callgraph
[ perf record: Woken up 5 times to write data ]
[ perf record: Captured and wrote 1.812 MB /tmp/__perf_test.perf.data.B2HvQ (8114 samples) ]
LBR callgraph [Success]
LBR any branch test
[ perf record: Woken up 25 times to write data ]
[ perf record: Captured and wrote 6.382 MB /tmp/__perf_test.perf.data.B2HvQ (8071 samples) ]
LBR any branch test: 8071 samples
LBR any branch test [Success]
LBR any call test
[ perf record: Woken up 23 times to write data ]
[ perf record: Captured and wrote 6.208 MB /tmp/__perf_test.perf.data.B2HvQ (8092 samples) ]
LBR any call test: 8092 samples
LBR any call test [Success]
LBR any ret test
[ perf record: Woken up 24 times to write data ]
[ perf record: Captured and wrote 6.396 MB /tmp/__perf_test.perf.data.B2HvQ (8093 samples) ]
LBR any ret test: 8093 samples
LBR any ret test [Success]
LBR any indirect call test
[ perf record: Woken up 25 times to write data ]
[ perf record: Captured and wrote 6.344 MB /tmp/__perf_test.perf.data.B2HvQ (8067 samples) ]
LBR any indirect call test: 8067 samples
LBR any indirect call test [Success]
LBR any indirect jump test
[ perf record: Woken up 12 times to write data ]
[ perf record: Captured and wrote 3.073 MB /tmp/__perf_test.perf.data.B2HvQ (8061 samples) ]
LBR any indirect jump test: 8061 samples
LBR any indirect jump test [Success]
LBR direct calls test
[ perf record: Woken up 25 times to write data ]
[ perf record: Captured and wrote 6.380 MB /tmp/__perf_test.perf.data.B2HvQ (8076 samples) ]
LBR direct calls test: 8076 samples
LBR direct calls test [Success]
LBR any indirect user call test
[ perf record: Woken up 5 times to write data ]
[ perf record: Captured and wrote 1.597 MB /tmp/__perf_test.perf.data.B2HvQ (8079 samples) ]
LBR any indirect user call test: 8079 samples
LBR any indirect user call test [Success]
LBR system wide any branch test
[ perf record: Woken up 26 times to write data ]
[ perf record: Captured and wrote 9.088 MB /tmp/__perf_test.perf.data.B2HvQ (9209 samples) ]
LBR system wide any branch test: 9209 samples
LBR system wide any branch test [Success]
LBR system wide any call test
[ perf record: Woken up 25 times to write data ]
[ perf record: Captured and wrote 8.945 MB /tmp/__perf_test.perf.data.B2HvQ (9333 samples) ]
LBR system wide any call test: 9333 samples
LBR system wide any call test [Success]
LBR parallel any branch test
LBR parallel any call test
LBR parallel any ret test
LBR parallel any indirect call test
LBR parallel any indirect jump test
LBR parallel direct calls test
LBR parallel system wide any branch test
LBR parallel any indirect user call test
LBR parallel system wide any call test
[ perf record: Woken up 9 times to write data ]
[ perf record: Woken up 51 times to write data ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Woken up 5 times to write data ]
[ perf record: Woken up 559 times to write data ]
[ perf record: Woken up 14 times to write data ]
[ perf record: Woken up 17 times to write data ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Woken up 11 times to write data ]
[ perf record: Captured and wrote 0.150 MB /tmp/__perf_test.perf.data.lANpR (1909 samples) ]
[ perf record: Captured and wrote 2.371 MB /tmp/__perf_test.perf.data.Olum8 (3033 samples) ]
[ perf record: Captured and wrote 1.230 MB /tmp/__perf_test.perf.data.njfJ8 (1742 samples) ]
[ perf record: Captured and wrote 5.554 MB /tmp/__perf_test.perf.data.4ZTrj (29662 samples) ]
[ perf record: Captured and wrote 19.906 MB /tmp/__perf_test.perf.data.dlGQt (29576 samples) ]
[ perf record: Captured and wrote 0.289 MB /tmp/__perf_test.perf.data.CAT7y (4311 samples) ]
[ perf record: Captured and wrote 3.129 MB /tmp/__perf_test.perf.data.diuKG (3971 samples) ]
LBR parallel any indirect user call test: 1909 samples
[ perf record: Captured and wrote 4.858 MB /tmp/__perf_test.perf.data.sVjtN (6130 samples) ]
LBR parallel any indirect user call test [Success]
[ perf record: Captured and wrote 3.669 MB /tmp/__perf_test.perf.data.AJtNI (4827 samples) ]
LBR parallel any indirect jump test: 4311 samples
LBR parallel any indirect jump test [Success]
LBR parallel direct calls test: 3033 samples
LBR parallel direct calls test [Success]
LBR parallel any indirect call test: 1742 samples
LBR parallel any indirect call test [Success]
LBR parallel any call test: 4827 samples
LBR parallel any call test [Success]
LBR parallel any branch test: 6130 samples
LBR parallel any branch test [Success]
LBR parallel system wide any branch test: 29662 samples
LBR parallel any ret test: 3971 samples
LBR parallel any ret test [Success]
LBR parallel system wide any branch test [Success]
LBR parallel system wide any call test: 29576 samples
LBR parallel system wide any call test [Success]
---- end(0) ----
97: perf record LBR tests : Ok
root@x1:~#
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZrTXftup0H46R8WK@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adds coverage for LBR operations and LBR callgraph.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240808054644.1286065-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 3e0bf9fde2 ("perf pmu: Restore full PMU name wildcard
support") adds a test case "PMU cmdline match" that covers PMU name
wildcard support provided by function perf_pmu__match().
The test works with a wide range of supported combinations of PMU name
matching but omits the case that if the perf_pmu__match() cannot match
the PMU name to the wildcard, it tries to match its alias. However, this
variable is not set up, causing the test case to fail when run with
subprocesses or to segfault if run as a single process.
./perf test -vv 9
9: Sysfs PMU tests :
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
9.6: PMU cmdline match : FAILED!
./perf test -F 9
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
Segmentation fault (core dumped)
Initialize the PMU alias to null for all tests of perf_pmu__match()
as this functionality is not being tested and the alias matching works
exactly the same as the matching of the PMU name.
./perf test -F 9
9.1: Parsing with PMU format directory : Ok
9.2: Parsing with PMU event : Ok
9.3: PMU event names : Ok
9.4: PMU name combining : Ok
9.5: PMU name comparison : Ok
9.6: PMU cmdline match : Ok
Fixes: 3e0bf9fde2 ("perf pmu: Restore full PMU name wildcard support")
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Radostin Stoyanov <rstoyano@redhat.com>
Link: https://lore.kernel.org/r/20240808103749.9356-1-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 'perf ftrace profile sleep 0.1' we know that we'll have an specific
kernel function that will take a bit more than 0.1 seconds and will take
place just one time, so we can add a check for that so that we validate
more than just the presence of some functions in the profile.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/lkml/ZrTBo7KACZeuCyLj@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Building with JEVENTS_ARCH=all builds all CPU types and allows things
like assertions to check the validity of the input JSON.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Charles Ci-Jyun Wu <dminus@andestech.com>
Cc: Eric Lin <eric.lin@sifive.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Inochi Amaoto <inochiama@outlook.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Locus Wei-Han Chen <locus84@andestech.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Vincent Chen <vincent.chen@sifive.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240805194424.597244-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now it can run the BPF filtering test with normal user if the BPF
objects are pinned by 'sudo perf record --setup-filter pin'. Let's
update the test case to verify the behavior. It'll skip the test if the
filter check is failed from a normal user, but it shows a message how to
set up the filters.
First, run the test as a normal user and it fails.
$ perf test -vv filtering
95: perf record sample filtering (by BPF) tests:
--- start ---
test child forked, pid 425677
Checking BPF-filter privilege
try 'sudo perf record --setup-filter pin' first. <<<--- here
bpf-filter test [Skipped permission]
---- end(-2) ----
95: perf record sample filtering (by BPF) tests : Skip
According to the message, run the perf record command to pin the BPF
objects.
$ sudo perf record --setup-filter pin
And re-run the test as a normal user.
$ perf test -vv filtering
95: perf record sample filtering (by BPF) tests:
--- start ---
test child forked, pid 424486
Checking BPF-filter privilege
Basic bpf-filter test
Basic bpf-filter test [Success]
Failing bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Failing bpf-filter test [Success]
Group bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Error: task-clock event does not have PERF_SAMPLE_CODE_PAGE_SIZE
Group bpf-filter test [Success]
---- end(0) ----
95: perf record sample filtering (by BPF) tests : Ok
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20240703223035.2024586-9-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a check to return the metric validation test early when perf list metric
does not output any metric. This would happen when NO_JEVENTS=1 is set or in a
system that there is no metric supported.
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samantha Alt <samantha.alt@intel.com>
Link: https://lore.kernel.org/lkml/20240522204254.1841420-1-weilin.wang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit aa1551f299 ("perf test pmu: Refactor format test and exposed
test APIs") added the 'test_pmus' list, but didn't use it.
(It seems to put them on the other_pmus list?)
Remove it.
Fixes: aa1551f299 ("perf test pmu: Refactor format test and exposed test APIs")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/lkml/20240727175919.1041468-1-linux@treblig.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it to add a regression test for the BTF augmentation of enum
arguments for tracepoints in 'perf trace':
root@x1:~# perf trace -e landlock_add_rule perf test -w landlock
0.000 ( 0.009 ms): perf/747160 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_PATH_BENEATH, rule_attr: 0x7ffd8e258594, flags: 45) = -1 EINVAL (Invalid argument)
0.011 ( 0.002 ms): perf/747160 landlock_add_rule(ruleset_fd: 11, rule_type: LANDLOCK_RULE_NET_PORT, rule_attr: 0x7ffd8e2585a0, flags: 45) = -1 EINVAL (Invalid argument)
root@x1:~#
Committer notes:
It was agreed on the discussion (see Link below) to shorten then name of
the workload from 'landlock_add_rule' to 'landlock', and I moved it to a
separate patch.
Also, to address a build failure from Namhyung, I stopped loading
linux/landlock.h and instead added the used defines, enums and types to
make this build in older systems. All we want is to emit the syscall and
intercept it.
Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Howard Chu <howardchu95@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/CAH0uvohaypdTV6Z7O5QSK+va_qnhZ6BP6oSJ89s1c1E0CjgxDA@mail.gmail.com
Link: https://lore.kernel.org/r/20240624181345.124764-1-howardchu95@gmail.com
Link: https://lore.kernel.org/r/20240624181345.124764-6-howardchu95@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_DEBUG_INFO_BTF
and CONFIG_KALLSYMS
- Enable the warning for symbol reference to .exit.* sections by default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate base
DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
-----BEGIN PGP SIGNATURE-----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=BYu7
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove tristate choice support from Kconfig
- Stop using the PROVIDE() directive in the linker script
- Reduce the number of links for the combination of CONFIG_KALLSYMS and
CONFIG_DEBUG_INFO_BTF
- Enable the warning for symbol reference to .exit.* sections by
default
- Fix warnings in RPM package builds
- Improve scripts/make_fit.py to generate a FIT image with separate
base DTB and overlays
- Improve choice value calculation in Kconfig
- Fix conditional prompt behavior in choice in Kconfig
- Remove support for the uncommon EMAIL environment variable in Debian
package builds
- Remove support for the uncommon "name <email>" form for the DEBEMAIL
environment variable
- Raise the minimum supported GNU Make version to 4.0
- Remove stale code for the absolute kallsyms
- Move header files commonly used for host programs to scripts/include/
- Introduce the pacman-pkg target to generate a pacman package used in
Arch Linux
- Clean up Kconfig
* tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits)
kbuild: doc: gcc to CC change
kallsyms: change sym_entry::percpu_absolute to bool type
kallsyms: unify seq and start_pos fields of struct sym_entry
kallsyms: add more original symbol type/name in comment lines
kallsyms: use \t instead of a tab in printf()
kallsyms: avoid repeated calculation of array size for markers
kbuild: add script and target to generate pacman package
modpost: use generic macros for hash table implementation
kbuild: move some helper headers from scripts/kconfig/ to scripts/include/
Makefile: add comment to discourage tools/* addition for kernel builds
kbuild: clean up scripts/remove-stale-files
kconfig: recursive checks drop file/lineno
kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec
kallsyms: get rid of code for absolute kallsyms
kbuild: Create INSTALL_PATH directory if it does not exist
kbuild: Abort make on install failures
kconfig: remove 'e1' and 'e2' macros from expression deduplication
kconfig: remove SYMBOL_CHOICEVAL flag
kconfig: add const qualifiers to several function arguments
kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups()
...
Commit cf8e865810 ("arch: Remove Itanium (IA-64) architecture")
removed the last use of the absolute kallsyms.
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/20240221202655.2423854-1-jannh@google.com/
[masahiroy@kernel.org: rebase the code and reword the commit description]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit b2b9d3a3f0 ("perf pmu: Support wildcards on pmu name in dynamic
pmu events") gives the following example for wildcarding a subset of
PMUs:
E.g., in a system with the following dynamic pmus:
mypmu_0
mypmu_1
mypmu_2
mypmu_4
perf stat -e mypmu_[01]/<config>/
Since commit f91fa2ae63 ("perf pmu: Refactor perf_pmu__match()"), only
"*" has been supported, removing the ability to subset PMUs, even though
parse-events.l still supports ? and [] characters.
Fix it by using fnmatch() when any glob character is detected and add a
test which covers that and other scenarios of
perf_pmu__match_ignoring_suffix().
Fixes: f91fa2ae63 ("perf pmu: Refactor perf_pmu__match()")
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: robin.murphy@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240626145448.896746-2-james.clark@arm.com
The test has been failing for some time when two separate runs of
perf benchmarks are recorded for cycles events and their counts are
compared, while once the recording was done with option --bpf-counters
and once without it. It is expected that the count of the samples
should be within a certain range, firstly the difference was set to be
within 10%, which was then later raised to 20%. However, the test case
keeps failing on certain architectures as recording the provided
benchmark can produce completely different counts based on the
current load of the system.
Sampling two separate runs on intel-eaglestream-spr-13 of "perf stat
--no-big-num -e cycles -- perf bench sched messaging -g 1 -l 100 -t":
Performance counter stats for 'perf bench sched messaging -g 1 -l 100 -t':
396782898 cycles
0.010051983 seconds time elapsed
0.008664000 seconds user
0.097058000 seconds sys
Performance counter stats for 'perf bench sched messaging -g 1 -l 100 -t':
1431133032 cycles
0.021803714 seconds time elapsed
0.023377000 seconds user
0.349918000 seconds sys
, which is ranging from 400mil to 1400mil samples.
Instead of recording the cycles use instructions event, which provides
more stable values. At the same time change the tested workload to one
of the provided testing workloads by perf that is not based on a
scheduler, which can provide another dependency on the current load.
Sampling instructions event with the new workload provide much more
stable results on intel-eaglestream-spr-13 of "perf stat --no-big-num
-e instructions -- perf test -w brstack":
Performance counter stats for 'perf test -w brstack':
64584494 instructions
0.009173945 seconds time elapsed
0.007262000 seconds user
0.002071000 seconds sys
Performance counter stats for 'perf test -w brstack':
64672669 instructions
0.008888135 seconds time elapsed
0.005018000 seconds user
0.004018000 seconds sys
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: mpetlan@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625092001.10909-1-vmolnaro@redhat.com
Make the tests code its own library. This is done to avoid compiling
code twice, once for the perf tool and once for the perf python
module.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-5-irogers@google.com
Test "perf probe of function from different CU" only checks if the perf
command has failed and doesn't test the --funcs output. In the issue
reported in the previous commit, the garbage output of the --funcs
command was being ignored by the test when it could have been caught.
The script first makes use of --funcs option with the perf probe command
to check if the function "foo" exists in the testfile before adding a
probe to it in the next command. The output of probe...--funcs command
is redirected to stdout, therefore, add '| grep "foo"' to validate the
result.
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: anshuman.khandual@arm.com
Cc: james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240601125946.1741414-11-ChaitanyaS.Prakash@arm.com
The 2 second sleep can cause the test to fail on very slow network file
systems because Perf ends up being killed before it finishes starting
up.
Fix it by making the leafloop workload end after a fixed time like the
other workloads so there is no need to kill it after 2 seconds.
Also remove the 1 second start sampling delay because it is similarly
fragile. Instead, search through all samples for a matching one, rather
than just checking the first sample and hoping it's in the right place.
Fixes: cd6382d827 ("perf test arm64: Test unwinding using fame-pointer (fp) mode")
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: German Gomez <german.gomez@arm.com>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240612140316.3006660-1-james.clark@arm.com
Running "perftool-testsuite_probe" fails as below:
./perf test -v "perftool-testsuite_probe"
83: perftool-testsuite_probe : FAILED
There are three fails:
1. Regexp not found: "\s*probe:inode_permission(?:_\d+)?\s+\(on inode_permission(?:[:\+][0-9A-Fa-f]+)?@.+\)"
-- [ FAIL ] -- perf_probe :: test_adding_kernel :: listing added probe :: perf probe -l (output regexp parsing)
2. Regexp not found: "probe:vfs_mknod"
Regexp not found: "probe:vfs_create"
Regexp not found: "probe:vfs_rmdir"
Regexp not found: "probe:vfs_link"
Regexp not found: "probe:vfs_write"
-- [ FAIL ] -- perf_probe :: test_adding_kernel :: wildcard adding support (command exitcode + output regexp parsing)
3. Regexp not found: "Failed to find"
Regexp not found: "somenonexistingrandomstuffwhichisalsoprettylongorevenlongertoexceed64"
Regexp not found: "in this function|at this address"
Line did not match any pattern: "The /boot/vmlinux file has no debug information."
Line did not match any pattern: "Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo package."
These three tests depends on kernel debug info.
1. Fail 1 expects file name along with probe which needs debuginfo
2. Fail 2 :
perf probe -nf --max-probes=512 -a 'vfs_* $params'
Debuginfo-analysis is not supported.
Error: Failed to add events.
3. Fail 3 :
perf probe 'vfs_read somenonexistingrandomstuffwhichisalsoprettylongorevenlongertoexceed64'
Debuginfo-analysis is not supported.
Error: Failed to add events.
There is already helper function skip_if_no_debuginfo in
lib/probe_vfs_getname.sh which does perf probe and returns
"2" if debug info is not present. Use the skip_if_no_debuginfo
function and skip only the three tests which needs debuginfo
based on the result.
With the patch:
83: perftool-testsuite_probe:
--- start ---
test child forked, pid 3927
-- [ PASS ] -- perf_probe :: test_adding_kernel :: adding probe inode_permission ::
-- [ PASS ] -- perf_probe :: test_adding_kernel :: adding probe inode_permission :: -a
-- [ PASS ] -- perf_probe :: test_adding_kernel :: adding probe inode_permission :: --add
-- [ PASS ] -- perf_probe :: test_adding_kernel :: listing added probe :: perf list
Regexp not found: "\s*probe:inode_permission(?:_\d+)?\s+\(on inode_permission(?:[:\+][0-9A-Fa-f]+)?@.+\)"
-- [ SKIP ] -- perf_probe :: test_adding_kernel :: 2 2 Skipped due to missing debuginfo :: testcase skipped
-- [ PASS ] -- perf_probe :: test_adding_kernel :: using added probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: deleting added probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: listing removed probe (should NOT be listed)
-- [ PASS ] -- perf_probe :: test_adding_kernel :: dry run :: adding probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: force-adding probes :: first probe adding
-- [ PASS ] -- perf_probe :: test_adding_kernel :: force-adding probes :: second probe adding (without force)
-- [ PASS ] -- perf_probe :: test_adding_kernel :: force-adding probes :: second probe adding (with force)
-- [ PASS ] -- perf_probe :: test_adding_kernel :: using doubled probe
-- [ PASS ] -- perf_probe :: test_adding_kernel :: removing multiple probes
Regexp not found: "probe:vfs_mknod"
Regexp not found: "probe:vfs_create"
Regexp not found: "probe:vfs_rmdir"
Regexp not found: "probe:vfs_link"
Regexp not found: "probe:vfs_write"
-- [ SKIP ] -- perf_probe :: test_adding_kernel :: 2 2 Skipped due to missing debuginfo :: testcase skipped
Regexp not found: "Failed to find"
Regexp not found: "somenonexistingrandomstuffwhichisalsoprettylongorevenlongertoexceed64"
Regexp not found: "in this function|at this address"
Line did not match any pattern: "The /boot/vmlinux file has no debug information."
Line did not match any pattern: "Rebuild with CONFIG_DEBUG_INFO=y, or install an appropriate debuginfo package."
-- [ SKIP ] -- perf_probe :: test_adding_kernel :: 2 2 Skipped due to missing debuginfo :: testcase skipped
-- [ PASS ] -- perf_probe :: test_adding_kernel :: function with retval :: add
-- [ PASS ] -- perf_probe :: test_adding_kernel :: function with retval :: record
-- [ PASS ] -- perf_probe :: test_adding_kernel :: function argument probing :: script
## [ PASS ] ## perf_probe :: test_adding_kernel SUMMARY
---- end(0) ----
83: perftool-testsuite_probe : Ok
Only the three specific tests are skipped and remaining
ran successfully.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240617122121.7484-1-atrajeev@linux.vnet.ibm.com
PowerPC has mixed case events matching legacy hardware cache
events. Warn but don't fail in this case. Event parsing will still
work in this case by matching the legacy case.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240612124027.2712643-1-irogers@google.com
On some s390 linux machine (mostly older models) and with debug
packages installed, the test case 'perf annotate basic tests' runs
for some longer time.
Speed up the test and save the output of command perf annotate
in a temporary file. This is used to perform pattern matching via
grep command. This saves on invocation of perf annotate which
runs for some time.
Output before:
# time bash -x tests/shell/annotate.sh >/dev/null 2>&1; echo EXIT CODE $?
real 4m35.543s
user 3m19.442s
sys 1m14.322s
EXIT CODE 0
#
Output after:
# time bash -x tests/shell/annotate.sh >/dev/null 2>&1; echo EXIT CODE $?
real 2m2.881s
user 1m30.980s
sys 0m30.684s
EXIT CODE 0
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240607054352.2774936-1-tmricht@linux.ibm.com
Test behavior of PMU names and comparisons wrt suffixes using Intel
uncore_cha, marvell mrvl_ddr_pmu and S390's cpum_cf as examples.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Bharat Bhushan <bbhushan2@marvell.com>
Cc: Bhaskara Budiredla <bbudiredla@marvell.com>
Cc: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515060114.3268149-3-irogers@google.com
Tracepoints can start with digits, although we don't have many of these:
$ rg -g '*.h' '\bTRACE_EVENT\([0-9]'
net/mac802154/trace.h
53:TRACE_EVENT(802154_drv_return_int,
...
net/ieee802154/trace.h
66:TRACE_EVENT(802154_rdev_add_virtual_intf,
...
include/trace/events/9p.h
124:TRACE_EVENT(9p_client_req,
...
Just allow names to start with digits too so e.g. "perf trace -e '9p:*'"
works
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240510-perf_digit-v4-3-db1553f3233b@codewreck.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The next commit will allow tracepoints starting with digits, but most
systems do not have any available by default so tests should skip the
actual "check if it exists in /sys/kernel/debug/tracing" step.
In order to do that, add a new boolean flag specifying if we should
actually "format" the probe or not.
Originally-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240510-perf_digit-v4-2-db1553f3233b@codewreck.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add reference count checking and switch 'struct mem_info' usage to use
accessor functions.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240507183545.1236093-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move mem-info to its own header rather than having it split between
mem-events and symbol.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240507183545.1236093-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dso pointer in 'struct dso_data' is necessary for reference count
checking to account for the dso_data forming a global list of open dso's
with references to the dso.
The dso pointer also allows for the indirection that reference count
checking needs. Outside of reference count checking the indirection
isn't needed and container_of() is more efficient and saves space.
The reference count won't be increased by placing items onto the global
list, matching how things were before the reference count checking
change, but we assert the dso is in dsos holding it live (and that the
set of open dsos is a subset of all dsos for the machine).
Update the DSO data tests so that they use a dsos struct to make the
invariant true.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/20240506180104.485674-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add reference count checking to struct dso, this can help with
implementing correct reference counting discipline. To avoid
RC_CHK_ACCESS everywhere, add accessor functions for the variables in
struct dso.
The majority of the change is mechanical in nature and not easy to
split up.
Committer testing:
'perf test' up to this patch shows no regressions.
But:
util/symbol.c: In function ‘dso__load_bfd_symbols’:
util/symbol.c:1683:9: error: too few arguments to function ‘dso__set_adjust_symbols’
1683 | dso__set_adjust_symbols(dso);
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from util/symbol.c:21:
util/dso.h:268:20: note: declared here
268 | static inline void dso__set_adjust_symbols(struct dso *dso, bool val)
| ^~~~~~~~~~~~~~~~~~~~~~~
make[6]: *** [/home/acme/git/perf-tools-next/tools/build/Makefile.build:106: /tmp/tmp.ZWHbQftdN6/util/symbol.o] Error 1
MKDIR /tmp/tmp.ZWHbQftdN6/tests/workloads/
make[6]: *** Waiting for unfinished jobs....
This was updated:
- symbols__fixup_end(&dso->symbols, false);
- symbols__fixup_duplicate(&dso->symbols);
- dso->adjust_symbols = 1;
+ symbols__fixup_end(dso__symbols(dso), false);
+ symbols__fixup_duplicate(dso__symbols(dso));
+ dso__set_adjust_symbols(dso);
But not build tested with BUILD_NONDISTRO and libbfd devel files installed
(binutils-devel on fedora).
Add the missing argument:
symbols__fixup_end(dso__symbols(dso), false);
symbols__fixup_duplicate(dso__symbols(dso));
- dso__set_adjust_symbols(dso);
+ dso__set_adjust_symbols(dso, true);
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240504213803.218974-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Being either lower or upper case means event name probes can avoid
scanning the directory doing case insensitive comparisons, just the
lower or upper case version of the name can be checked for
existence.
For the majority of PMUs event names are all lower case, upper case
names are present on S390.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow events/aliases to be eagerly loaded for a PMU. Factor out the
pmu_aliases_parse to allow this.
Parse a test event and check it configures the attribute as expected.
There is overlap with the parse-events tests, but this test is done with
a PMU created in a temp directory and doesn't rely on PMUs in sysfs.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In tests/pmu.c, make a common utility that creates a PMU in a mkdtemp
directory and uses regular PMU parsing logic to load that PMU. Formats
must still be eagerly loaded as by default the PMU code assumes devices
are going to be in sysfs.
In util/pmu.[ch], hide perf_pmu__format_parse but add the eager argument
to perf_pmu__lookup called by perf_pmus__add_test_pmu. Later patches
will eagerly load other non-sysfs files when eager loading is enabled.
In tests/pmu.c, rather than manually constructing a list of term
arguments, just use the term parsing code from a string.
Add more comments and debug logging.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add JSON to the test name.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can't default to doing parallel tests as there are tests that compete
for the same resources and thus clash, for instance tests that put in
place 'perf probe' probes, that clean the probes without regard to other
tests needs, ARM64 coresight tests, Intel PT ones, etc.
So reintroduce --p/--parallel and make -S/--sequential the default.
We need to come up with infrastructure that state which tests can't run
in parallel because they need exclusive access to some resource,
something as simple as "probes" that would then avoid 'perf probe' tests
from running while other such test is running, or make the tests more
resilient, till then we can't use parallel mode as default.
While at it, document all these options in the 'perf test' man page.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reported-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Ziwm18BqIn_vc1vn@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from "cache-references" to "branches" in test as Intel has a
sysfs event for "cache-references" and changing the priority for sysfs
over legacy causes the test to fail.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Beeman Strong <beeman@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240416061533.921723-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These tests record in a mode that includes kernel trace but look for
samples of a userspace process. This makes them sensitive to any kernel
compilation options that increase the amount of time spent in the
kernel. If the trace buffer is completely filled before userspace is
reached then the test will fail. Double the buffer size to fix this.
The other tests in the same file aren't sensitive to this for various
reasons, for example the iterate devices test filters by userspace trace
only. But in order to keep coverage of all the modes, increase the
buffer size rather than filtering by userspace for the basic tests.
Fixes: d1efa4a0a6 ("perf cs-etm: Add separate decode paths for timeless and per-thread modes")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240326113749.257250-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactor test to better enable sharing of logic, to give an idea of
progress and introduce test functions. Add test of measuring both
cycles and cycles:b simultaneously.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416170014.985191-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test "perf probe of function from different CU" fails due to certain
configs not being enabled. Building the kernel with
CONFIG_KPROBE_EVENTS=y and CONFIG_UPROBE_EVENTS=y fixes the issue. As
CONFIG_KPROBE_EVENTS is dependent on CONFIG_KPROBES, enable it as well.
Some platforms enable these configs as a part of their defconfig, so
this change is only required for the ones that don't do so.
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240408062230.1949882-1-ChaitanyaS.Prakash@arm.com
Link: https://lore.kernel.org/r/20240408062230.1949882-7-ChaitanyaS.Prakash@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This check can be done with uname which is more portable. At the same
time re-arrange it into a standard if statement so that it's more
readable.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Link: https://lore.kernel.org/r/20240410103458.813656-5-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PERF_PMU_CAP_EXTENDED_HW_TYPE results in multiple events being opened on
heterogeneous systems. Currently this test only sets its required
attributes on the first event. Not disabling enable_on_exec on the other
events causes the test to fail because the forked objdump processes are
sampled. No tracking event is opened so Perf only knows about its own
mappings causing the objdump samples to give the following error:
$ perf test -vvv "object code reading"
Reading object code for memory address: 0xffff9aaa55ec
thread__find_map failed
---- end(-1) ----
24: Object code reading : FAILED!
Fixes: 251aa04024 ("perf parse-events: Wildcard most "numeric" events")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Link: https://lore.kernel.org/r/20240410103458.813656-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To prevent anyone from seeing a test failure appear as a regression and
thinking that it was caused by their code change, insert some noise into
the loop which makes it immune to sampling bias issues (errata 1694299).
The "test data symbol" test can fail with any unrelated change that
shifts the loop into an unfortunate position in the Perf binary which is
almost impossible to debug as the root cause of the test failure.
Ultimately it's caused by the referenced errata.
Fixes: 60abedb8aa ("perf test: Introduce script for data symbol testing")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Link: https://lore.kernel.org/r/20240410103458.813656-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from running tests sequentially to running in parallel by
default. Change the opt-in '-p' or '--parallel' flag to '-S' or
'--sequential'.
On an 8 core tigerlake an address sanitizer run time changes from:
326.54user 622.73system 6:59.91elapsed 226%CPU
to:
973.02user 583.98system 3:01.17elapsed 859%CPU
So over twice as fast, saving 4 minutes.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240301174711.2646944-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the perf test output smoother by timing out the poll of the child
process after 100ms rather than 1s.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240301074639.2260708-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from dumping err then out, to a single file descriptor for both
of them. This allows the err and output to be correctly interleaved in
verbose output.
Fixes: b482f5f8e0 ("perf tests: Add option to run tests in parallel")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240301074639.2260708-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Per-thread mode requires either system-wide (-a), a pid (-p) or a tid
(-t).
The stat output tests were using system-wide mode but this is racy when
threads are starting and exiting - something that happens a lot when
running the tests in parallel (perf test -p).
Avoid the race conditions by using pid mode with the pid of the parent
process.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240301074639.2260708-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than manually iterating the CPU map, use
perf_cpu_map__for_each_cpu(). When possible tidy local variables.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Link: https://lore.kernel.org/r/20240202234057.2085863-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just to make things clearer, return TEST_FAIL (-1) instead of an open
coded -1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/ZdepeMsjagbf1ufD@x1
By default tests are forked, add an option (-p or --parallel) so that
the forked tests are all started in parallel and then their output
gathered serially. This is opt-in as running in parallel can cause
test flakes.
Rather than fork within the code, the start_command/finish_command
from libsubcmd are used. This changes how stderr and stdout are
handled. The child stderr and stdout are always read to avoid the
child blocking. If verbose is 1 (-v) then if the test fails the child
stdout and stderr are displayed. If the verbose is >1 (e.g. -vv) then
the stdout and stderr from the child are immediately displayed.
An unscientific test on my laptop shows the wall clock time for perf
test without parallel being 5 minutes 21 seconds and with parallel
(-p) being 1 minute 50 seconds.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-9-irogers@google.com
Rather than special shell test logic, do a single pass to create an
array of test suites. Hold the shell test file name in the test suite
priv field. This makes the special shell test logic in builtin-test.c
redundant so remove it.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-8-irogers@google.com
Avoid filename appending buffers by using openat, faccessat and
scandirat more widely. Turn the script's path back to a file name
using readlink from /proc/<pid>/fd/<fd>.
Read the script's description using api/io.h to avoid fdopen
conversions. Whilst reading perform additional sanity checks on the
script's contents.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-7-irogers@google.com
builtin-test-list is primarily concerned with shell script
tests. Rename the file to better reflect this and add a missed header
guard.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-6-irogers@google.com
perf test -vv Symbols is used to indentify symbols within the perf
binary. Add the -F flag so that the test command doesn't fork the test
before running. This removes a little overhead.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240221034155.1500118-4-irogers@google.com
Later we will use libcapstone to disassemble instructions of samples.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: changbin.du@gmail.com
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240217074046.4100789-2-changbin.du@huawei.com
As a form of validation, it is a common practice to check the outputs
of commands whether they contain expected patterns or match a certain
regex.
Add helpers for verifying that all regexes are found in the output, that
all lines match any pattern from a set and that a certain expression is
not present in the output.
In verbose mode these helpers log mismatches for easier failure
investigation.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-6-mpetlan@redhat.com
Add new perf probe test case that acts as an entry element in perf test
list. Runs multiple subtests from directory "base_probe", which will be
added in incomming patches and can be expanded without further editing.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-5-mpetlan@redhat.com
Unify perf regexes for checking testing output into a single file
to reduce duplicates and prevent errors when editing.
This will be used in upcomming patches in shell tests.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: kjain@linux.ibm.com
Cc: atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240215110231.15385-2-mpetlan@redhat.com
The test needs a struct machine and creates one for the current host,
but a side-effect is that struct machine has set up kernel maps
including module maps.
If the 'Symbols' test --dso option specifies a current kernel module,
it will already be present as a kernel dso, and a map with kmaps needs
to be used otherwise there will be a segfault - see below.
For that case, find the existing map and use that. In that case also,
the dso is split by section into multiple dsos, so test those dsos
also. That in turn, shows up that those dsos have not had overlapping
symbols removed, so the test fails.
Example:
Before:
$ perf test -F -v Symbols --dso /lib/modules/$(uname -r)/kernel/arch/x86/kvm/kvm-intel.ko
70: Symbols :
--- start ---
Testing /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko
Segmentation fault (core dumped)
After:
$ perf test -F -v Symbols --dso /lib/modules/$(uname -r)/kernel/arch/x86/kvm/kvm-intel.ko
70: Symbols :
--- start ---
Testing /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko
Overlapping symbols:
41d30-41fbb l vmx_init
41d30-41fbb g init_module
---- end ----
Symbols: FAILED!
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131192416.16387-1-adrian.hunter@intel.com
Move the struct into the C file. Add maps__equal to work around
exposing the struct for reference count checking. Add accessors for
the unwind_libunwind_ops. Move maps_list_node to its only use in
symbol.c.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-6-irogers@google.com
Finding a map is done under a lock, returning the map without a
reference count means it can be removed without notice and causing
uses after free. Grab a reference count to the map within the lock
region and return this. Fix up locations that need a map__put
following this. Also fix some reference counted pointer comparisons.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-4-irogers@google.com
Finding a map is done under a lock, returning the map without a
reference count means it can be removed without notice and causing
uses after free. Grab a reference count to the map within the lock
region and return this. Fix up locations that need a map__put
following this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-3-irogers@google.com
Maps is a collection of maps primarily sorted by the starting address
of the map. Prior to this change the maps were held in an rbtree
requiring 4 pointers per node. Prior to reference count checking, the
rbnode was embedded in the map so 3 pointers per node were
necessary. This change switches the rbtree to an array lazily sorted
by address, much as the array sorting nodes by name. 1 pointer is
needed per node, but to avoid excessive resizing the backing array may
be twice the number of used elements. Meaning the memory overhead is
roughly half that of the rbtree. For a perf record with
"--no-bpf-event -g -a" of true, the memory overhead of perf inject is
reduce fom 3.3MB to 3MB, so 10% or 300KB is saved.
Map inserts always happen at the end of the array. The code tracks
whether the insertion violates the sorting property. O(log n) rb-tree
complexity is switched to O(1).
Remove slides the array, so O(log n) rb-tree complexity is degraded to
O(n).
A find may need to sort the array using qsort which is O(n*log n), but
in general the maps should be sorted and so average performance should
be O(log n) as with the rbtree.
An rbtree node consumes a cache line, but with the array 4 nodes fit
on a cache line. Iteration is simplified to scanning an array rather
than pointer chasing.
Overall it is expected the performance after the change should be
comparable to before, but with half of the memory consumed.
To avoid a list and repeated logic around splitting maps,
maps__merge_in is rewritten in terms of
maps__fixup_overlap_and_insert. maps_merge_in splits the given mapping
inserting remaining gaps. maps__fixup_overlap_and_insert splits the
existing mappings, then adds the incoming mapping. By adding the new
mapping first, then re-inserting the existing mappings the splitting
behavior matches.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Artem Savkov <asavkov@redhat.com>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240210031746.4057262-2-irogers@google.com
Some platforms have 'cluster' topology and CPUs in the cluster will
share resources like L3 Cache Tag (for HiSilicon Kunpeng SoC) or L2
cache (for Intel Jacobsville). Currently parsing and building cluster
topology have been supported since [1].
perf stat has already supported aggregation for other topologies like
die or socket, etc. It'll be useful to aggregate per-cluster to find
problems like L3T bandwidth contention.
This patch add support for "--per-cluster" option for per-cluster
aggregation. Also update the docs and related test. The output will
be like:
[root@localhost tmp]# perf stat -a -e LLC-load --per-cluster -- sleep 5
Performance counter stats for 'system wide':
S56-D0-CLS158 4 1,321,521,570 LLC-load
S56-D0-CLS594 4 794,211,453 LLC-load
S56-D0-CLS1030 4 41,623 LLC-load
S56-D0-CLS1466 4 41,646 LLC-load
S56-D0-CLS1902 4 16,863 LLC-load
S56-D0-CLS2338 4 15,721 LLC-load
S56-D0-CLS2774 4 22,671 LLC-load
[...]
On a legacy system without cluster or cluster support, the output will
be look like:
[root@localhost perf]# perf stat -a -e cycles --per-cluster -- sleep 1
Performance counter stats for 'system wide':
S56-D0-CLS0 64 18,011,485 cycles
S7182-D0-CLS0 64 16,548,835 cycles
Note that this patch doesn't mix the cluster information in the outputs
of --per-core to avoid breaking any tools/scripts using it.
Note that perf recently supports "--per-cache" aggregation, but it's not
the same with the cluster although cluster CPUs may share some cache
resources. For example on my machine all clusters within a die share the
same L3 cache:
$ cat /sys/devices/system/cpu/cpu0/cache/index3/shared_cpu_list
0-31
$ cat /sys/devices/system/cpu/cpu0/topology/cluster_cpus_list
0-3
[1] commit c5e22feffd ("topology: Represent clusters of CPUs within a die")
Tested-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: james.clark@arm.com
Cc: 21cnbao@gmail.com
Cc: prime.zeng@hisilicon.com
Cc: Jonathan.Cameron@huawei.com
Cc: fanghao11@huawei.com
Cc: linuxarm@huawei.com
Cc: tim.c.chen@intel.com
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240208024026.2691-1-yangyicong@huawei.com
stat+std_output.sh test fails on my arm64 machine:
[root@localhost shell]# ./stat+std_output.sh
Checking STD output: no args Unknown event name in TopDownL1 # 0.18 retiring
[root@localhost shell]# ./stat+std_output.sh
Checking STD output: no args [Success]
Checking STD output: system wide [Success]
Checking STD output: interval [Success]
Checking STD output: per thread Unknown event name in tmux: server-1114960 # 0.41 frontend_bound
When no args specified `perf stat` will add TopdownL1 metric group
and the output will be like:
[root@localhost shell]# perf stat -- stress-ng --vm 1 --timeout 1
stress-ng: info: [3351733] setting to a 1 second run per stressor
stress-ng: info: [3351733] dispatching hogs: 1 vm
stress-ng: info: [3351733] successful run completed in 1.02s
Performance counter stats for 'stress-ng --vm 1 --timeout 1':
1,037.71 msec task-clock # 1.000 CPUs utilized
13 context-switches # 12.528 /sec
1 cpu-migrations # 0.964 /sec
67,544 page-faults # 65.090 K/sec
2,691,932,561 cycles # 2.594 GHz (74.56%)
6,571,333,653 instructions # 2.44 insn per cycle (74.92%)
521,863,142 branches # 502.901 M/sec (75.21%)
425,879 branch-misses # 0.08% of all branches (87.57%)
TopDownL1 # 0.61 retiring (87.67%)
# 0.03 frontend_bound (87.67%)
# 0.02 bad_speculation (87.67%)
# 0.34 backend_bound (74.61%)
1.038138390 seconds time elapsed
0.844849000 seconds user
0.189053000 seconds sys
Metrics in group TopDownL1 don't have event name on arm64 but are not
listed in the $skip_metric list which they should be listed. Add them
to the skip list as what does for x86 platforms in [1].
[1] commit 4d60e83dfc ("perf test: Skip metrics w/o event name in stat STD output linter")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: linuxarm@huawei.com
Cc: kan.liang@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240207091222.54096-1-yangyicong@huawei.com
Prior to this patch '0' would be dropped as the config values default
to 0. Some json values are hex and the string '0' wouldn't match '0x0'
as zero. Add a more robust is_zero test to drop these event terms.
When encoding numbers as hex, if the number is between 0 and 9
inclusive then don't add a 0x prefix.
Update test expectations for these changes.
On x86 this reduces the event/metric C string by 58,411 bytes.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131201429.792138-1-irogers@google.com
Prior to this patch the first and the last error encountered during
parsing are printed. To see other errors verbose needs
enabling. Unfortunately this can drop useful errors, in particular on
terms. This patch changes the errors so that instead of the first and
last all errors are recorded and printed, the underlying data
structure is changed to a list.
Before:
```
$ perf stat -e 'slots/edge=2/' true
event syntax error: 'slots/edge=2/'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'slots'
Initial error:
event syntax error: 'slots/edge=2/'
\___ Cannot find PMU `slots'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
After:
```
$ perf stat -e 'slots/edge=2/' true
event syntax error: 'slots/edge=2/'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'slots'
event syntax error: 'slots/edge=2/'
\___ value too big for format (edge), maximum is 1
event syntax error: 'slots/edge=2/'
\___ Cannot find PMU `slots'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: tchen168@asu.edu
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240131134940.593788-3-irogers@google.com
The original test report was too complicated to read with information
that not really useful. This new update simplify the report which should
largely improve the readibility.
Signed-off-by: Weilin Wang <weilin.wang@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Samantha Alt <samantha.alt@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240130180907.639729-1-weilin.wang@intel.com
The daemon signal test sends signals and then expects files to be
written. It was observed on an Intel Alderlake that the signals were
sent too quickly leading to the 3 expected files not appearing.
To avoid this send the next signal only after the expected previous file
has appeared. To avoid an infinite loop the number of retries is
limited.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
"grep -cv" can exit with an error code that causes the "set -e" to abort
the script. Switch to using the grep exit code in the if condition to
avoid this.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Write the JSON output to a specific file to avoid debug output
breaking it.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Ross Zwisler <zwisler@chromium.org>
Cc: Shirisha G <shirisha@linux.ibm.com>
Link: https://lore.kernel.org/r/20240124043015.1388867-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In linux next repo, test case 'perf script tests' fails on s390.
The root case is a command line invocation of 'perf record' with
call-graph information. On s390 only DWARF formatted call-graphs are
supported and only on software events.
Change the command line parameters for s390.
Output before:
# perf test 89
89: perf script tests : FAILED!
#
Output after:
# perf test 89
89: perf script tests : Ok
#
Fixes: 0dd5041c9a ("perf addr_location: Add init/exit/copy functions")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20240125100351.936262-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Even though this is a frame pointer unwind test, it's testing that a
frame pointer stack can be augmented correctly with a partial
Dwarf unwind. So add a feature check so that this test skips instead of
fails if Dwarf unwinding isn't present.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Spoorthy S <spoorts2@in.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Link: https://lore.kernel.org/r/20240123163903.350306-3-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This test case often fails on s390 (about 2 out of 10) because the
10% percent limit on the difference between --bpf-counters event counting
and s390 hardware counting is more than 10% in all failure cases.
Raise the limit to 20% on s390 and the test case succeeds.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Link: https://lore.kernel.org/r/20240108084009.3959211-1-tmricht@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf test 17 'Setup struct perf_event_attr' fails on s390 z/VM guest,
using linux-next kernel.
Root cause is the fall-back from hardware counter cycles
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ADDR|PERIOD|DATA_SRC
read_format ID|LOST
which returns -ENOENT on s390 z/VM guest. This causes the code to fall
back to software counter task-clock, as can be seen in the debug output:
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x1 (PERF_COUNT_SW_TASK_CLOCK) <-here
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ADDR|PERIOD|DATA_SRC
read_format ID|LOST
This succeeds on s390 z/VM guest.
This successful installation of the counter task-clock is not listed in
the expected results and the test case fails.
This is caused by commit eb2eac0c7b ("perf evsel: Fallback to
"task-clock" when not system wide") which introduced fall back from
event 'cycles' to event 'task-clock'.
To fix this on s390 allow event number 0 (cycles) and event number 1
(task-clock) as expected result.
Output before:
# ./perf test -Fv 17
17: Setup struct perf_event_attr :
--- start ---
running './tests/attr/test-stat-group1'
unsupp './tests/attr/test-stat-group1'
running './tests/attr/test-record-graph-default'
test limitation '!aarch64'
excluded architecture list ['aarch64']
expected config=0, got 1
FAILED './tests/attr/test-record-graph-default' - match failure
---- end ----
Setup struct perf_event_attr: FAILED!
#
Output after:
# ./perf test -F 17
17: Setup struct perf_event_attr : Ok
#
Fixes: eb2eac0c7b ("perf evsel: Fallback to "task-clock" when not system wide")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20231219143235.1075522-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Start a new set of shell tests for testing perf script. The initial
contribution is checking that some perf db-export functionality works
as reported in this regression by Ben Gainey <ben.gainey@arm.com>:
https://lore.kernel.org/lkml/20231207140911.3240408-1-ben.gainey@arm.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ben Gainey <ben.gainey@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231207174057.1482161-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch loop macro maps__for_each_entry to maps__for_each_map function
that takes a callback. The function holds the maps lock, which should
be held during iteration.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Li Dong <lidong@vivo.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Wenyu Liu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20231207011722.1220634-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the DSO data tests a suite rather than individual so their output
is grouped.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20231128194624.1419260-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Passing NULL to perf_cpu_map__new() performs
perf_cpu_map__new_online_cpus(), just directly call
perf_cpu_map__new_online_cpus() to be more intention revealing.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: bpf@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20231129060211.1890454-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_cpu_map__dummy_new() to perf_cpu_map__new_any_cpu() to
better indicate this is creating a CPU map for the perf_event_open "any"
CPU case.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: bpf@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20231129060211.1890454-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The diff test depends on finding the symbol test_loop in perf and will
fail if perf has been stripped and no debug object is available. In that
case, skip the test instead.
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231205164924.835682-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are some old bug reports on perf diff crashing:
https://rhaas.blogspot.com/2012/06/perf-good-bad-ugly.html
Happening across them I was prompted to add two very basic tests that
will give some 'perf diff' coverage.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231120190408.281826-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test that JSON output produces valid JSON.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231129213428.2227448-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid replicated logic by having a common library to set the PYTHON
environment variable.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231129213428.2227448-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Migrate Makefile.tests to Build so that variables like rule_mkdir are
defined via Makefile.build (needed so the output directory can be
created). This requires SHELLCHECK being exported and the clean rule
tweaking to remove the files in find.
Change find "-perm -o=x" as it was failing on my Debian based Linux
kernel tree, switch to using "-executable".
Adding a filename prefix of "." to the shellcheck log files is a pain
and error prone in make, remove this prefix and just add the
shellcheck log files to .gitignore.
Fix the command echo so that running the test is displayed.
Fixes: 1638b11ef8 ("perf tools: Add perf binary dependent rule for shellcheck log in Makefile.perf")
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231129213428.2227448-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'vg' register for arm64 shows up in --user_regs as available when
masking the variable AT_HWCAP with 1 << 22 returns '1' as done in
perf_regs.c.
However, in subtests for support of SVE, the check for the 'vg' register
is done by masking the variable AT_HWCAP with the value 0x200000 which
is equals to 1 << 21 instead of 1 << 22.
This results in inconsistencies on certain systems where the test
expects that the 'vg' register is not operational when it is, and
vice-versa.
During the testing on a machine that the test expected not to have the
'vg' register available, 'perf record' with the option --user-regs
showed records for the 'vg' register together with all of the others,
which means that the mask for the subtest of perf_event_attr is off by
one.
Change the value of the mask from 0x200000 to 0x400000 to correct it.
Fixes: 9440ebdc33 ("perf test arm64: Add attr tests for new VG register")
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20231201194617.13012-1-vmolnaro@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf test "probe libc's inet_pton & backtrace it with ping" fails on
powerpc as below:
# perf test -v "probe libc's inet_pton & backtrace it with
ping"
85: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 96028
ping 96056 [002] 127271.101961: probe_libc:inet_pton: (7fffa1779a60)
7fffa1779a60 __GI___inet_pton+0x0 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
7fffa172a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
FAIL: expected backtrace entry
"gaih_inet.*\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/glibc-hwcaps/power10/libc.so.6\)$"
got "7fffa172a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)"
test child finished with -1
---- end ----
probe libc's inet_pton & backtrace it with ping: FAILED!
This test installs a probe on libc's inet_pton function, which will use
uprobes and then uses perf trace on a ping to localhost. It gets 3
levels deep backtrace and checks whether it is what we expected or not.
The test started failing from RHEL 9.4 where as it works in previous
distro version (RHEL 9.2). Test expects gaih_inet function to be part of
backtrace. But in the glibc version (2.34-86) which is part of distro
where it fails, this function is missing and hence the test is failing.
From nm and ping command output we can confirm that gaih_inet function
is not present in the expected backtrace for glibc version glibc-2.34-86
[root@xxx perf]# nm /usr/lib64/glibc-hwcaps/power10/libc.so.6 | grep gaih_inet
00000000001273e0 t gaih_inet_serv
00000000001cd8d8 r gaih_inet_typeproto
[root@xxx perf]# perf script -i /tmp/perf.data.6E8
ping 104048 [000] 128582.508976: probe_libc:inet_pton: (7fff83779a60)
7fff83779a60 __GI___inet_pton+0x0 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
7fff8372a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
11dc73534 [unknown] (/usr/bin/ping)
7fff8362a8c4 __libc_start_call_main+0x84 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
FAIL: expected backtrace entry
"gaih_inet.*\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/glibc-hwcaps/power10/libc.so.6\)$"
got "7fff9d52a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)"
With version glibc-2.34-60 gaih_inet function is present as part of the
expected backtrace. So we cannot just remove the gaih_inet function from
the backtrace.
[root@xxx perf]# nm /usr/lib64/glibc-hwcaps/power10/libc.so.6 | grep gaih_inet
0000000000130490 t gaih_inet.constprop.0
000000000012e830 t gaih_inet_serv
00000000001d45e4 r gaih_inet_typeproto
[root@xxx perf]# ./perf script -i /tmp/perf.data.b6S
ping 67906 [000] 22699.591699: probe_libc:inet_pton_3: (7fffbdd80820) 7fffbdd80820 __GI___inet_pton+0x0
(/usr/lib64/glibc-hwcaps/power10/libc.so.6) 7fffbdd31160 gaih_inet.constprop.0+0xcd0
(/usr/lib64/glibc-hwcaps/power10/libc.so.6) 7fffbdd31c7c getaddrinfo+0x14c
(/usr/lib64/glibc-hwcaps/power10/libc.so.6) 1140d3558 [unknown] (/usr/bin/ping)
This patch solves this issue by doing a conditional skip. If there is a
gaih_inet function present in the libc then it will be added to the
expected backtrace else the function will be skipped from being added
to the expected backtrace.
Output with the patch
[root@xxx perf]# ./perf test -v "probe libc's inet_pton & backtrace it
with ping"
83: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 102662
ping 102692 [000] 127935.549973: probe_libc:inet_pton: (7fff93379a60)
7fff93379a60 __GI___inet_pton+0x0 (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
7fff9332a73c getaddrinfo+0x121c (/usr/lib64/glibc-hwcaps/power10/libc.so.6)
11ef03534 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Likhitha Korrapati <likhitha@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231126070914.175332-1-likhitha@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are issues as reported that need some more investigation on the
RT kernel front, till that is addressed, skip this test.
This test is already skipped for multiple hardware architectures where
the tested kernel feature is not supported.
Acked-by: Marco Elver <elver@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/e368f2c848d77fbc8d259f44e2055fe469c219cf.camel@gmx.de/
Link: https://lore.kernel.org/r/20231129154718.326330-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the part that loads the BTF info to a "btf__available()" that will
lazy load the BTF info so that if we need it for some other test, which
we will in the following cset, we can reuse it.
At some point this will move from this specific 'perf test' entry to be
used in other parts of perf, do it when needed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231129154718.326330-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is already an existing config value for changing the objdump path,
so instead of having two values that do the same thing, make 'perf test'
use annotate.objdump as well.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/ZU5Cx4LTrB5q0sIG@kernel.org
Link: https://lore.kernel.org/r/20231113102327.695386-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf data symbol test depends on finding symbol buf1 in perf, and fails if
perf has been stripped and no debug object is available. In that case, skip
the test instead.
Example:
Before:
$ strip tools/perf/perf
$ tools/perf/perf buildid-cache -p `realpath tools/perf/perf`
$ tools/perf/perf test -v 'data symbol'
113: Test data symbol :
--- start ---
test child forked, pid 125646
Recording workload...
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.577 MB /tmp/__perf_test.perf.data.Jhbdp (7794 samples) ]
Cleaning up files...
test child finished with -1
---- end ----
Test data symbol: FAILED!
After:
$ tools/perf/perf test -v 'data symbol'
113: Test data symbol :
--- start ---
test child forked, pid 125747
perf does not have symbol 'buf1'
perf is missing symbols - skipping test
test child finished with -2
---- end ----
Test data symbol: Skip
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf data symbol test waits 1 second for perf to run and collect data,
which may be too little if perf takes a long time to start up, which has
been noticed on systems with many CPUs. Use existing wait_for_perf_to_start
helper to wait for perf to start.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test "Check branch stack sampling" depends on finding symbol
brstack_bench (and several others) in perf, and fails if perf has been
stripped and no debug object is available. In that case, skip the test
instead.
Example:
Before:
$ strip tools/perf/perf
$ tools/perf/perf buildid-cache -p `realpath tools/perf/perf`
$ tools/perf/perf test -v 'branch stack sampling'
112: Check branch stack sampling :
--- start ---
test child forked, pid 123741
Testing user branch stack sampling
+ grep -E -m1 ^brstack_bench\+[^ ]*/brstack_foo\+[^ ]*/IND_CALL/.*$ /tmp/__perf_test.program.5Dz1U/perf.script
+ cleanup
+ rm -rf /tmp/__perf_test.program.5Dz1U
test child finished with -1
---- end ----
Check branch stack sampling: FAILED!
After:
$ tools/perf/perf test -v 'branch stack sampling'
112: Check branch stack sampling :
--- start ---
test child forked, pid 125157
perf does not have symbol 'brstack_bench'
perf is missing symbols - skipping test
test child finished with -2
---- end ----
Check branch stack sampling: Skip
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test "Check Arm64 callgraphs are complete in fp mode" depends on
finding symbol leafloop in perf, and fails if perf has been stripped and no
debug object is available. In that case, skip the test instead.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record test depends on finding symbol test_loop in perf, and fails if
perf has been stripped and no debug object is available. In that case, skip
the test instead.
Example:
Note, building with perl support adds option -Wl,-E which causes the
linker to add all (global) symbols to the dynamic symbol table. So the
test_loop symbol, being global, does not get stripped unless NO_LIBPERL=1
Before:
$ make NO_LIBPERL=1 -C tools/perf >/dev/null 2>&1
$ strip tools/perf/perf
$ tools/perf/perf buildid-cache -p `realpath tools/perf/perf`
$ tools/perf/perf test -v 'record tests'
91: perf record tests :
--- start ---
test child forked, pid 118750
Basic --per-thread mode test
Per-thread record [Failed missing output]
Register capture test
Register capture test [Success]
Basic --system-wide mode test
System-wide record [Skipped not supported]
Basic target workload test
Workload record [Failed missing output]
test child finished with -1
---- end ----
perf record tests: FAILED!
After:
$ tools/perf/perf test -v 'record tests'
91: perf record tests :
--- start ---
test child forked, pid 120025
perf does not have symbol 'test_loop'
perf is missing symbols - skipping test
test child finished with -2
---- end ----
perf record tests: Skip
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf pipe recording and injection test depends on finding symbol noploop in
perf, and fails if perf has been stripped and no debug object is available.
In that case, skip the test instead.
Example:
Before:
$ strip tools/perf/perf
$ tools/perf/perf buildid-cache -p `realpath tools/perf/perf`
$ tools/perf/perf test -v pipe
86: perf pipe recording and injection test :
--- start ---
test child forked, pid 47734
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
47741 47741 -1 |perf
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
cannot find noploop function in pipe #1
test child finished with -1
---- end ----
perf pipe recording and injection test: FAILED!
After:
$ tools/perf/perf test -v pipe
86: perf pipe recording and injection test :
--- start ---
test child forked, pid 48996
perf does not have symbol 'noploop'
perf is missing symbols - skipping test
test child finished with -2
---- end ----
perf pipe recording and injection test: Skip
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some shell tests depend on finding symbols for perf itself, and fail if
perf has been stripped and no debug object is available. Add helper
functions to check if perf has a needed symbol. This is preparation for
amending the tests themselves to be skipped if a needed symbol is not
found.
The functions make use of the "Symbols" test which reads and checks symbols
from a dso, perf itself by default. Note the "Symbols" test will find
symbols using the same method as other perf tests, including, for example,
looking in the buildid cache.
An alternative would be to prevent the needed symbols from being stripped,
which seems to work with gcc's externally_visible attribute, but that
attribute is not supported by clang.
Another alternative would be to use option -Wl,-E (which is already used
when perf is built with perl support) which causes the linker to add all
(global) symbols to the dynamic symbol table. Then the required symbols
need only be made global in scope to avoid being strippable. However that
goes beyond what is needed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231123075848.9652-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add rule in new Makefile "tests/Makefile.tests" for running shellcheck
on shell test scripts. This automates below shellcheck into the build.
$ for F in $(find tests/shell/ -perm -o=x -name '*.sh'); do shellcheck -S warning $F; done
Condition for shellcheck is added in Makefile.perf to avoid build
breakage in the absence of shellcheck binary. Update Makefile.perf to
contain new rule for "SHELLCHECK_TEST" which is for making shellcheck
test as a dependency on perf binary.
Added "tests/Makefile.tests" to run shellcheck on shellscripts in
tests/shell. The make rule "SHLLCHECK_RUN" ensures that, every time
during make, shellcheck will be run only on modified files during
subsequent invocations. By this, if any newly added shell scripts or
fixes in existing scripts breaks coding/formatting style, it will get
captured during the perf build.
Example build failure by modifying probe_vfs_getname.sh in tests/shell:
In tests/shell/probe_vfs_getname.sh line 8:
. $(dirname $0)/lib/probe.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
For more information:
https://www.shellcheck.net/wiki/SC2046 -- Quote this to prevent word splitt...
make[3]: *** [/root/athira/perf-tools-next/tools/perf/tests/Makefile.tests:18: tests/shell/.probe_vfs_getname.sh.shellcheck_log] Error 1
make[2]: *** [Makefile.perf:686: SHELLCHECK_TEST] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile.perf:244: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
Here, like other files which gets created during compilation (ex:
.builtin-bench.o.cmd or .perf.o.cmd ), create .shellcheck_log also as a
hidden file. Example: tests/shell/.probe_vfs_getname.sh.shellcheck_log
shellcheck is re-run if any of the script gets modified based on its
dependency of this log file.
After this, for testing, changed "tests/shell/trace+probe_vfs_getname.sh" to
break shellcheck format. In the next make run, it is also captured:
In tests/shell/probe_vfs_getname.sh line 8:
. $(dirname $0)/lib/probe.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
For more information:
https://www.shellcheck.net/wiki/SC2046 -- Quote this to prevent word splitt...
make[3]: *** [/root/athira/perf-tools-next/tools/perf/tests/Makefile.tests:18: tests/shell/.probe_vfs_getname.sh.shellcheck_log] Error 1
make[3]: *** Waiting for unfinished jobs....
In tests/shell/trace+probe_vfs_getname.sh line 14:
. $(dirname $0)/lib/probe.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
For more information:
https://www.shellcheck.net/wiki/SC2046 -- Quote this to prevent word splitt...
make[3]: *** [/root/athira/perf-tools-next/tools/perf/tests/Makefile.tests:18: tests/shell/.trace+probe_vfs_getname.sh.shellcheck_log] Error 1
make[2]: *** [Makefile.perf:686: SHELLCHECK_TEST] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile.perf:244: sub-make] Error 2
make: *** [Makefile:70: all] Error 2
Failure log can be found in the stdout of make itself.
This is reported at build time. To be able to go ahead with the build or
disable shellcheck even though it is known that some test is broken, add
a "NO_SHELLCHECK" option. Example:
make NO_SHELLCHECK=1
INSTALL libsubcmd_headers
INSTALL libsymbol_headers
INSTALL libapi_headers
INSTALL libperf_headers
INSTALL libbpf_headers
LINK perf
Note:
This is tested on RHEL and also SLES. Use below check:
"$(shell which shellcheck 2> /dev/null)" to look for presence
of shellcheck binary. The approach "shell command -v" is not
used here. In some of the distros(RHEL), command is available
as executable file (/usr/bin/command). But in some distros(SLES),
it is a shell builtin and not available as executable file.
Committer testing:
$ type shellcheck
shellcheck is hashed (/usr/bin/shellcheck)
$ rpm -qf /usr/bin/shellcheck
ShellCheck-0.9.0-2.fc38.x86_64
$
$ alias m
$ git diff
diff --git a/tools/perf/tests/shell/probe_vfs_getname.sh b/tools/perf/tests/shell/probe_vfs_getname.sh
index 554e12e83c55fd56..dbc14634678e2bf6 100755
--- a/tools/perf/tests/shell/probe_vfs_getname.sh
+++ b/tools/perf/tests/shell/probe_vfs_getname.sh
@@ -5,7 +5,7 @@
# Arnaldo Carvalho de Melo <acme@kernel.org>, 2017
# shellcheck source=lib/probe.sh
-. "$(dirname $0)"/lib/probe.sh
+. $(dirname $0)/lib/probe.sh
skip_if_no_perf_probe || exit 2
alias m='rm -rf ~/libexec/perf-core/ ; make -k CORESIGHT=1 O=/tmp/build/$(basename $PWD) -C tools/perf install-bin && perf test python'
$ m
make: Entering directory '/home/acme/git/perf-tools-next/tools/perf'
BUILD: Doing 'make -j32' parallel build
<SNIP>
INSTALL libbpf_headers
In tests/shell/probe_vfs_getname.sh line 8:
. $(dirname $0)/lib/probe.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
For more information:
https://www.shellcheck.net/wiki/SC2046 -- Quote this to prevent word splitt...
make[3]: *** [/home/acme/git/perf-tools-next/tools/perf/tests/Makefile.tests:18: tests/shell/.probe_vfs_getname.sh.shellcheck_log] Error 1
make[2]: *** [Makefile.perf:686: SHELLCHECK_TEST] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile.perf:244: sub-make] Error 2
make: *** [Makefile:113: install-bin] Error 2
make: Leaving directory '/home/acme/git/perf-tools-next/tools/perf'
$
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231123160232.94253-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These variables are never referenced in the code, just remove them.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231115064255.11057-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf tool has previously made legacy events the priority so with
or without a PMU the legacy event would be opened:
$ perf stat -e cpu-cycles,cpu/cpu-cycles/ true
Using CPUID GenuineIntel-6-8D-1
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
Attempting to add event pmu 'cpu' with 'cpu-cycles,' that may result in non-fatal errors
After aliases, add event pmu 'cpu' with 'cpu-cycles,' that may result in non-fatal errors
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid 833967 cpu -1 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
...
Fixes to make hybrid/BIG.little PMUs behave correctly, ie as core PMUs
capable of opening legacy events on each, removing hard coded "cpu_core"
and "cpu_atom" Intel PMU names, etc. caused a behavioral difference on
Apple/ARM due to latent issues in the PMU driver reported in:
https://lore.kernel.org/lkml/08f1f185-e259-4014-9ca4-6411d5c1bc65@marcan.st/
As part of that report Mark Rutland <mark.rutland@arm.com> requested
that legacy events not be higher in priority when a PMU is specified
reversing what has until this change been perf's default behavior. With
this change the above becomes:
$ perf stat -e cpu-cycles,cpu/cpu-cycles/ true
Using CPUID GenuineIntel-6-8D-1
Attempt to add: cpu/cpu-cycles=0/
..after resolving event: cpu/event=0x3c/
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid 827628 cpu -1 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
perf_event_attr:
type 4 (PERF_TYPE_RAW)
size 136
config 0x3c
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
enable_on_exec 1
exclude_guest 1
------------------------------------------------------------
...
So the second event has become a raw event as
/sys/devices/cpu/events/cpu-cycles exists.
A fix was necessary to config_term_pmu in parse-events.c as check_alias
expansion needs to happen after config_term_pmu, and config_term_pmu may
need calling a second time because of this.
config_term_pmu is updated to not use the legacy event when the PMU has
such a named event (either from JSON or sysfs).
The bulk of this change is updating all of the parse-events test
expectations so that if a sysfs/JSON event exists for a PMU the test
doesn't fail - a further sign, if it were needed, that the legacy event
priority was a known and tested behavior of the perf tool.
Reported-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Hector Martin <marcan@marcan.st>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231123042922.834425-1-irogers@google.com
[ Initialize the 'alias_rewrote_terms' variable to false to address a clang warning ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a basic test for the branch counter feature.
The test verifies that
- The new filter can be successfully applied on the supported platforms.
- The counter value can be outputted via the perf report -D
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tinghao Zhang <tinghao.zhang@intel.com>
Link: https://lore.kernel.org/r/20231107184020.1497571-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current use of atomics can lead to test failures, as tests (such as
tests/shell/record.sh) search for samples with "test_loop" as the
top-most stack frame, but find frames related to the atomic operation
(e.g. __aarch64_ldadd4_relax).
This change simply removes the "count" variable, as it is not necessary.
Fixes: 1962ab6f6e ("perf test workload thloop: Make count increments atomic")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Nick Forrington <nick.forrington@arm.com>
Acked-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20231102162225.50028-1-nick.forrington@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All of the other Perf subcommands that use objdump have an option to
specify the binary, so add the same option to 'perf test'.
This is useful if you have built the kernel with a different toolchain
to the system one, where the system objdump may fail to disassemble
vmlinux.
Now this can be fixed with something like this:
$ perf test --objdump llvm-objdump "object code reading"
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20231106151051.129440-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390 using linux-next the test case:
87: perf record offcpu profiling tests
fails. The root cause is this command
# ./perf record --off-cpu -e dummy -- ./perf bench sched messaging -l 10
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 0.231 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.077 MB perf.data (401 samples) ]
#
It does not generate 800+ sample entries, on s390 usually around
40[1-9], sometimes a few more, but never more than 450. The higher the
number of CPUs the lower the number of samples.
Looking at function chain:
bench_sched_messaging()
+--> group()
the senders and receiver threads are created. The senders and receivers
call function ready() which writes one bytes and wait for a reply using
poll system() call.
As context switches are counted, the function ready() will trigger a
context switch when no input data is available after the write system
call. The write system call does not trigger context switches when the
data size is small. And writing 1000 bytes (10 iterations with
100 bytes) is not much and certainly won't block.
The 400+ context switch on s390 occur when the some receiver/sender
threads call ready() and wait for the response from function
bench_sched_messaging() being kicked off.
Lower the number of expected context switches to 400 to succeed on s390.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20231106091627.2022530-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a spelling mistake, Please fix it.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: https://lore.kernel.org/r/20231030075825.3701-1-zhaimingbing@cmss.chinamobile.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It tries cycles (or cpu-clock on s390) event with exclude_kernel bit to
open. But other arch on a VM can fail with the hardware event and need
to fallback to the software event in the same way.
So let's get rid of the cpuid check and use generic fallback mechanism
using an array of event candidates. Now event in the odd index excludes
the kernel so use that for the return value.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: James Clark <james.clark@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20231103195541.67788-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are spelling mistakes in comments and a pr_debug message. Fix them.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: https://lore.kernel.org/r/20231003074911.220216-1-colin.i.king@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One last case, caught while testing with amazonlinux:2, centos:stream,
etc:
4 7.28 amazonlinux:2 : FAIL egrep: warning: egrep is obsolescent; using grep -E
gcc version 7.3.1 20180712 (Red Hat 7.3.1-17) (GCC)
8 13.87 centos:stream : FAIL egrep: warning: egrep is obsolescent; using grep -E
Reviewed-by: Guilherme Amadio <amadio@gentoo.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZUEdtblE8qDAQkBK@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are two reasons to do this, firstly there is a shellcheck warning
in cs_etm_dev_name(), which can be completely deleted. And secondly the
current iteration method doesn't support systems with both ETE and ETM
because it picks one or the other. There isn't a known system with this
configuration, but it could happen in the future.
Iterating over all the sources for each CPU can be done by going through
/sys/bus/event_source/devices/cs_etm/cpu* and following the symlink back
to the Coresight device in /sys/bus/coresight/devices. This will work
whether the device is ETE, ETM or any future name, and is much simpler
and doesn't require any hard coded version numbers
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: tianruidong@linux.alibaba.com
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: atrajeev@linux.vnet.ibm.com
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20231023131550.487760-1-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Comparing pointers with reference count checking is tricky to avoid a
SEGV. Add a convenience macro to simplify and use.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
CoreSight might be not available, in such case, skip the tests.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: vmolnaro@redhat.com
Link: https://lore.kernel.org/r/20231019091137.22525-1-mpetlan@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on stat_all_metricgroups.sh reports
below warning:
In ./tests/shell/stat_all_metricgroups.sh line 7:
function ParanoidAndNotRoot()
^-- SC2112: 'function' keyword is non-standard. Delete it.
As per the format, "function" is a non-standard keyword that
can be used to declare functions. Fix this by removing the
"function" keyword from ParanoidAndNotRoot function
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231013073021.99794-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on record_sideband.sh throws below
warning:
In tests/shell/record_sideband.sh line 25:
if ! perf record -o ${perfdata} -BN --no-bpf-event -C $1 true 2>&1 >/dev/null
^--^ SC2069: To redirect stdout+stderr, 2>&1 must be last (or use '{ cmd > file; } 2>&1' to clarify).
This shows shellcheck warning SC2069 where the redirection
order needs to be fixed. Use "cmd > /dev/null 2>&1" to fix
the redirection of perf record output
Fixes: 23b97c7ee9 ("perf test: Add test case for record sideband events")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: disgoel@linux.vnet.ibm.com
Link: https://lore.kernel.org/r/20231013073021.99794-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on lock_contention.sh generates below
warning
In tests/shell/lock_contention.sh line 36:
if [ `nproc` -lt 4 ]; then
^-----^ SC2046: Quote this to prevent word splitting.
Here since nproc will generate a single word output
and there is no possibility of word splitting, this
warning can be ignored. Use exception for this with
"disable" option in shellcheck. This warning is observed
after commit:
"commit 29441ab3a3 ("perf test lock_contention.sh: Skip test
if not enough CPUs")"
Fixes: 29441ab3a3 ("perf test lock_contention.sh: Skip test if not enough CPUs")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20231013073021.99794-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The testcase "Object code reading" fails in somecases
for "fs_something" sub test as below:
Reading object code for memory address: 0xc008000007f0142c
File is: /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko
On file address is: 0x1114cc
Objdump command is: objdump -z -d --start-address=0x11142c --stop-address=0x1114ac /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko
objdump read too few bytes: 128
test child finished with -1
This can alo be reproduced when running perf record with
workload that exercises fs_something() code. In the test
setup, this is exercising xfs code since root is xfs.
# perf record ./a.out
# perf report -v |grep "xfs.ko"
0.76% a.out /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko 0xc008000007de5efc B [k] xlog_cil_commit
0.74% a.out /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko 0xc008000007d5ae18 B [k] xfs_btree_key_offset
0.74% a.out /lib/modules/6.5.0-rc3+/kernel/fs/xfs/xfs.ko 0xc008000007e11fd4 B [k] 0x0000000000112074
Here addr "0xc008000007e11fd4" is not resolved. since this is a
kernel module, its offset is from the DSO. Xfs module is loaded
at 0xc008000007d00000
# cat /proc/modules | grep xfs
xfs 2228224 3 - Live 0xc008000007d00000
And size is 0x220000. So its loaded between 0xc008000007d00000
and 0xc008000007f20000. From objdump, text section is:
text 0010f7bc 0000000000000000 0000000000000000 000000a0 2**4
Hence perf captured ip maps to 0x112074 which is:
( ip - start of module ) + a0
This offset 0x112074 falls out .text section which is up to 0x10f7bc
In this case for module, the address 0xc008000007e11fd4 is pointing
to stub instructions. This address range represents the module stubs
which is allocated on module load and hence is not part of DSO offset.
To address this issue in "object code reading", skip the sample if
address falls out of text section and is within the module end.
Use the "text_end" member of "struct dso" to do this check.
To address this issue in "perf report", exploring an option of
having stubs range as part of the /proc/kallsyms, so that perf
report can resolve addresses in stubs range
However this patch uses text_end to skip the stub range for
Object code reading testcase.
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel<disgoel@linux.ibm.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230928075213.84392-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Switch the test program to sleep that makes more sense for system wide
events. Only enable system wide when root or not paranoid. This avoids
failures under some testing conditions like ARM cloud.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230930060206.2353141-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Testcase "Parsing of all PMU events from sysfs" parse events for
all PMUs, and not just cpu. In case of powerpc, the PowerVM
environment supports events from hv_24x7 and hv_gpci PMU which
is of example format like below:
- hv_24x7/CPM_ADJUNCT_INST,domain=?,core=?/
- hv_gpci/event,partition_id=?/
The value for "?" needs to be filled in depending on system
configuration. It is better to skip these parametrized events
in this test as it is done in:
'commit b50d691e50 ("perf test: Fix "all PMU test" to skip
parametrized events")' which handled a simialr instance with
"all PMU test".
Fix parse-events test to skip parametrized events since
it needs proper setup of the parameters.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230927181703.80936-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add new event test for uncore system event which is used to verify the
functionality of "Compat" matching multiple identifiers and the new event
fields "EventidCode" and "NodeType".
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zhuo Song <zhuo.song@linux.alibaba.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/1695794391-34817-6-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The perf_pmu_test_event.matching_pmu didn't work. No matter what its
value is, it does not affect the test results. So let matching_pmu be
used for matching perf_pmu_test_pmu.pmu.name.
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Cc: Zhuo Song <zhuo.song@linux.alibaba.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/1695794391-34817-5-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on some of the shell scripts, throws
below warning on shellcheck v0.6. Example:
In tests/shell/coresight/asm_pure_loop.sh line 14:
DATA="$DATD/perf-$TEST-$DATV.data"
^---^ SC2153: Possible misspelling: DATD may not be assigned, but DATA is.
Here, DATD is exported from "lib/coresight.sh" and this
warning can be ignored. Use "shellcheck disable=" to ignore
this check.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230907171540.36736-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on stat+shadow_stat.sh generates below
warning
In tests/shell/stat+csv_summary.sh line 26:
while read _num _event _run _pct
^--^ SC2034: _num appears unused. Verify use (or export if used externally).
^----^ SC2034: _event appears unused. Verify use (or export if used externally).
^--^ SC2034: _run appears unused. Verify use (or export if used externally).
^--^ SC2034: _pct appears unused. Verify use (or export if used externally).
This variable is intentionally unused since it is
needed to parse through the output. commit used "_"
as a prefix for this throw away variable. But this
stil shows warning with shellcheck v0.6. Fix this
by only using "_" instead of prefix and variable name.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230907171540.36736-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Running shellcheck on some of the shell scripts throws
below error:
In tests/shell/coresight/unroll_loop_thread_10.sh line 8:
. "$(dirname $0)"/../lib/coresight.sh
^-- SC1090: Can't follow non-constant source. Use a directive to specify location.
This happens on shellcheck version "0.6.0". Fix shellcheck
warning for SC1090 using "shellcheck source="i option to mention
the location of sourced files.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230907171540.36736-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Machines with less then 4 CPUs weren't consistently triggering lock
events required for the test.
Skip the test on those machines. The limit of 4 CPUs is set as it
generates around 100 lock events for a test.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20230919150419.23193-2-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The test was failing in specific scenarios due to imperfection of FP
arithmetics. The `bc` command wasn't correctly rounding the result of
division causing the failure.
Replace the `bc` with `awk` which should work with more decimal places
and add a threshold to catch any possible rounding errors. The
acceptable rounding error is set to 0.01 when the test passes with a
warning message.
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Acked-by: Michael Petlan <mpetlan@redhat.com>
Link: https://lore.kernel.org/r/20230919150419.23193-1-vmolnaro@redhat.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use perf version to detect whether BPF skeletons were enabled in a
build rather than a failing perf record.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Patrice Duroux <patrice.duroux@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: llvm@lists.linux.dev
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230914211948.814999-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Fix a target name and set BUILD_BPF_SKEL to 0 rather than 1.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Patrice Duroux <patrice.duroux@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: llvm@lists.linux.dev
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230914211948.814999-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
pmu__find_core_pmu() more logically belongs in pmus.c because it
iterates over all PMUs, so move it to pmus.c
At the same time rename it to perf_pmus__find_core_pmu() to match the
naming convention in this file.
list_prepare_entry() can't be used in perf_pmus__scan_core() anymore now
that it's called from the same compilation unit. This is with -O2
(specifically -O1 -ftree-vrp -finline-functions
-finline-small-functions) which allow the bounds of the array
access to be determined at compile time. list_prepare_entry() subtracts
the offset of the 'list' member in struct perf_pmu from &core_pmus,
which isn't a struct perf_pmu. The compiler sees that pmu results in
&core_pmus - 8 and refuses to compile. At runtime this works because
list_for_each_entry_continue() always adds the offset back again before
dereferencing ->next, but it's technically undefined behavior. With
-fsanitize=undefined an additional warning is generated.
Using list_first_entry_or_null() to get the first entry here avoids
doing &core_pmus - 8 but has the same result and fixes both the compile
warning and the undefined behavior warning. There are other uses of
list_prepare_entry() in pmus.c, but the compiler doesn't seem to be
able to see that they can also be called with &core_pmus, so I won't
change any at this time.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Haixin Yu <yuhaixin.yhx@linux.alibaba.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230913153355.138331-2-james.clark@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Test that the new expression builtin returns a match when the current
escaped CPU ID is given, and that it doesn't match when "0x0" is given.
The CPU ID in test__expr() has to be changed to perf_pmu__getcpuid()
which returns the CPU ID string, rather than the raw CPU ID that
get_cpuid() returns because that can't be used with strcmp_cpuid_str().
It doesn't affect the is_intel test because both versions contain
"Intel".
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chen Zhongjin <chenzhongjin@huawei.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Haixin Yu <yuhaixin.yhx@linux.alibaba.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230904095104.1162928-5-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It finds all occurrences of a single character and replaces them with
a multi character string. This will be used in a test in a following
commit.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chen Zhongjin <chenzhongjin@huawei.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Haixin Yu <yuhaixin.yhx@linux.alibaba.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230904095104.1162928-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the function always returns 0, so even when the has_event()
test fails, the test still passes. Fix it by returning ret instead.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chen Zhongjin <chenzhongjin@huawei.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Haixin Yu <yuhaixin.yhx@linux.alibaba.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230904095104.1162928-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If only dummy event is recorded, tracking event is not needed.
Add this test scenario.
Test result:
# ./perf test list 2>&1 | grep 'Setup struct perf_event_attr'
17: Setup struct perf_event_attr
# ./perf test 17 -v
17: Setup struct perf_event_attr :
--- start ---
test child forked, pid 720198
<SNIP>
running './tests/attr/test-record-dummy-C0'
<SNIP>
test child finished with 0
---- end ----
Setup struct perf_event_attr: Ok
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230904023340.12707-7-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new test case to record sideband events for all CPUs when tracing
selected CPUs
Test result:
# ./perf test list 2>&1 | grep 'perf record sideband tests'
95: perf record sideband tests
# ./perf test 95
95: perf record sideband tests : Ok
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230904023340.12707-6-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User space tasks can migrate between CPUs, so when tracing selected CPUs,
sideband for all CPUs is needed. In this case set the cpu map of the evsel
to all online CPUs. This may modify the original cpu map of the evlist.
Therefore, need to check whether the preceding scenario exists before
record__init_thread_masks().
Dummy tracking has been set in record__open(), move it before
record__init_thread_masks() and add a helper for unified processing.
The sys_perf_event_open invoked is as follows:
# perf --debug verbose=3 record -e cpu-clock -D 100 true
<SNIP>
Opening: cpu-clock
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0 (PERF_COUNT_SW_CPU_CLOCK)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD|IDENTIFIER
read_format ID|LOST
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid 10318 cpu 0 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 10318 cpu 1 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid 10318 cpu 2 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid 10318 cpu 3 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid 10318 cpu 4 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid 10318 cpu 5 group_fd -1 flags 0x8 = 11
sys_perf_event_open: pid 10318 cpu 6 group_fd -1 flags 0x8 = 12
sys_perf_event_open: pid 10318 cpu 7 group_fd -1 flags 0x8 = 13
Opening: dummy:u
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0x9 (PERF_COUNT_SW_DUMMY)
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|IDENTIFIER
read_format ID|LOST
disabled 1
inherit 1
exclude_kernel 1
exclude_hv 1
mmap 1
comm 1
enable_on_exec 1
task 1
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
sys_perf_event_open: pid 10318 cpu 0 group_fd -1 flags 0x8 = 14
sys_perf_event_open: pid 10318 cpu 1 group_fd -1 flags 0x8 = 15
sys_perf_event_open: pid 10318 cpu 2 group_fd -1 flags 0x8 = 16
sys_perf_event_open: pid 10318 cpu 3 group_fd -1 flags 0x8 = 17
sys_perf_event_open: pid 10318 cpu 4 group_fd -1 flags 0x8 = 18
sys_perf_event_open: pid 10318 cpu 5 group_fd -1 flags 0x8 = 19
sys_perf_event_open: pid 10318 cpu 6 group_fd -1 flags 0x8 = 20
sys_perf_event_open: pid 10318 cpu 7 group_fd -1 flags 0x8 = 21
<SNIP>
'perf test' needs to update base-record & system-wide-dummy attr expected values
for test-record-C0:
1. Because a dummy sideband event is added to the sampling of specified
CPUs. When evlist contains evsel of different sample_type,
evlist__config() will change the default PERF_SAMPLE_ID bit to
PERF_SAMPLE_IDENTIFICATION bit.
The attr sample_type expected value of base-record and system-wide-dummy
in test-record-C0 needs to be updated.
2. The perf record uses evlist__add_aux_dummy() instead of
evlist__add_dummy() to add a dummy event.
The expected value of system-wide-dummy attr needs to be updated.
The 'perf test' result is as follows:
# ./perf test list 2>&1 | grep 'Setup struct perf_event_attr'
17: Setup struct perf_event_attr
# ./perf test 17
17: Setup struct perf_event_attr : Ok
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20230904023340.12707-4-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
parse_events_terms() existed in function names but was passed a
'struct list_head'.
As many parse_events functions take an evsel_config list as well as a
parse_event_term list, and the naming head_terms and head_config is
inconsistent, there's a potential to switch the lists and get errors.
Introduce a 'struct parse_events_terms', that just wraps a list_head, to
avoid this. Add the regular init/exit functions and transition the code
to use them.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230901233949.2930562-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A term may have no value in which case it is assumed to have a value
of 1. It doesn't just apply to alias/event terms so change the
parse_events_term__to_strbuf assert.
Commit 99e7138eb7 ("perf tools: Fail on using multiple bits long
terms without value") made it so that no_value terms could only be for a
single bit. Prior to commit 64199ae4b8 ("perf parse-events: Fix
propagation of term's no_value when cloning") this missed a test case
where config1 had no_value.
Fixes: 64199ae4b8 ("perf parse-events: Fix propagation of term's no_value when cloning")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230901233949.2930562-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Returns the number of CPUs online, unlike #num_cpus that returns the
number present.
Add a test of the property.
This will be used in future Intel metrics.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230830073026.1829912-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The JSON Unit field encodes the name of the PMU to match the events
to. When no name is given it has meant the "cpu" core PMU except for
tests.
On ARM, Intel hybrid and s390 the core PMU is named differently which
means that using "cpu" for this case causes the events not to get
matched to the PMU.
Introduce a new "default_core" string for this case and in the
pmu__name_match force all core PMUs to match this name.
Fixes: 2e255b4f9f ("perf jevents: Group events by PMU")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230826062203.1058041-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It has system-wide test and cpu-list test but the cpu-list test fails
sometimes. It runs sleep command on CPU1 and measure both user.slice
and system.slice cgroups by default (on systemd-based systems).
But if the system was idle enough, sometime the system.slice gets no
count and it makes the test failing. Maybe that's because it only looks
at the CPU1, let's add CPU0 to increase the chance it finds some tasks.
Fixes: 7901086014 ("perf test: Add a new test for perf stat cgroup BPF counter")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230825164152.165610-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As of now, bpf counters (bperf) don't support event groups. But the
default perf stat includes topdown metrics if supported (on recent Intel
machines) which require groups. That makes perf stat exiting.
$ sudo perf stat --bpf-counter true
bpf managed perf events do not yet support groups.
Actually the test explicitly uses cycles event only, but it missed to
pass the option when it checks the availability of the command.
Fixes: 2c0cb9f560 ("perf test: Add a shell test for 'perf stat --bpf-counters' new option")
Reviewed-by: Song Liu <song@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230825164152.165610-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The BPF sample filtering requires two kernel changes below:
* bpf_cast_to_kernel_ctx() kfunc (added in v6.2)
* setting perf_sample_data->sample_flags (finished in v6.3)
The perf tools can check bpf_cast_to_kernel_ctx() easily so it can
refuse BPF filters on those old kernels (v6.1 and earlier).
But checking sample_flags appears to be difficult so current code won't
work on v6.2 kernel. That's unfortunate but I don't know what's the
correct way to handle it.
For now, let's skip v6.2 kernels explicitly (if failed) in the test.
Fixes: 9575ecdd19 ("perf test: Add perf record sample filtering test")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230825164152.165610-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The struct pmu id is initialized from pmu_id that is read into allocated
memory from a file, as such it needs free-ing in pmu__delete().
Make the id value const so that we can remove casts in tests.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230825024002.801955-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This avoids casts in tests. Use zfree in a few places to avoid
warnings about a freeing a const pointer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230825024002.801955-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PMU name could be NULL in the case of the fake_pmu. Initialize the
name for the fake_pmu to "fake" so that all other logic can assume it
is initialized. Add a const to the type of name so that a literal can
be used to avoid additional initialization code. Propagate the cost
through related routines and remove now unnecessary "(char *)"
casts. Doing this located a bug in builtin-list for the pmu_glob that
was missing a strdup.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230825024002.801955-3-irogers@google.com
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: James Clark <james.clark@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Li <liwei391@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Ming Wang <wangming01@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Unit with the PMU name is appended to desc in jevents.py, but on
hybrid platforms it causes the desc to differ from the regular
non-hybrid system with a PMU of 'cpu'. Having differing descs means
the events don't deduplicate. To make the perf list output not differ,
append the Unit on again in the perf list printing code.
On x86 reduces the binary size by 409,600 bytes or about 4%. Update
pmu-events test expectations to match the differently generated
pmu-events.c code.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230824183212.374787-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't load sysfs aliases for a PMU when the PMU is first created, defer
until an alias needs to be found. For the pmu-scan benchmark, average
core PMU scanning is reduced by 30.8%, and average PMU scanning by
12.6%.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230824041330.266337-17-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than scanning all JSON events and adding them when a PMU is
created, add the alias when the JSON event is needed.
Average core PMU scanning run time reduced by 60.2%. Average PMU
scanning run time reduced by 15%. Page faults with no events reduced by
74 page faults, 4% of total.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230824041330.266337-14-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cache the JSON events table so that finding it isn't done per
event/alias.
Change the events table find so that when the PMU is given, if the PMU
has no JSON events return null.
Update usage to always use the PMU variable.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230824041330.266337-13-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than read a sysfs events file into a 256 byte char buffer, pass
the FILE* directly to the lex/yacc parser.
This avoids there being a maximum events file size.
While changing the API, constify some arguments to remove unnecessary
casts.
Allocating the read buffer decreases the performance of pmu-scan by
around 3%.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230824041330.266337-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
jevents stores events sorted by name. Add a find function that will
binary search event names avoiding the need to linearly search through
events.
Add a test in tests/pmu-events.c. If the PMU or event aren't found -1000
is returned. If the event is found but no callback function given, 0 is
returned.
This allows the find function also act as a test for existence.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230824041330.266337-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass the PMU to pmu_events_table__for_each_event so that entries that
don't match don't need to be processed by callback.
If a NULL PMU is passed then all PMUs are processed.
'perf bench internals pmu-scan's "Average PMU scanning" performance is
reduced by about 5% on an Intel tigerlake.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230824041330.266337-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prior to this change a cpuid would map to a list of events where the PMU
would be encoded alongside the event information. This change breaks
apart each group of events so that there is a group per PMU. A new table
is added with the PMU's name and the list of events, the original table
now holding an array of these per PMU tables.
These changes are to make it easier to get per PMU information about
events, rather than the current approach of scanning all events. The
perf binary size with BPF skeletons on x86 is reduced by about 1%. The
unidentified PMU is now always expanded to "cpu".
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230824041330.266337-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add extra underscore before "for" of pmu_events_table_for_each_event
and pmu_metrics_table_for_each_metric.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230824041330.266337-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to be able to lazily compute aliases/events for a PMU, move
the struct perf_pmu_alias into pmu.c.
Add perf_pmu__find_event and perf_pmu__for_each_event that take a
callback that is called for the found event or for each event.
The layout of struct pmu and the event/alias list is unchanged but the
API is altered so that aliases are no longer directly accessed, allowing
for later changes.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230824041330.266337-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass the pmu so the aliases and format list can be better abstracted
and later lazily loaded.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230823080828.1460376-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Abstract the format list better, hiding it in the PMU, by changing
perf_pmu__config_terms() the PMU rather than the format list in the PMU.
Change the PMU test to pass a dummy PMU for this purpose. Changing the
test allows perf_pmu__del_formats() to become static.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230823080828.1460376-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
riscv now supports mmaping hardware counters to userspace so adapt the
test to run on this architecture.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Rémi Denis-Courmont <remi@remlab.net>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20230802080328.1213905-11-alexghiti@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_dlfilter_fns.al_cleanup() to do addr_location__exit() on data
passed via perf_dlfilter_fns.resolve_address().
Add dlfilter-test-api-v2 to the "dlfilter C API" test to test it.
Update documentation, clarifying that data returned by APIs should not
be dereferenced after filter_event() and filter_event_early() return.
Fixes: 0dd5041c9a ("perf addr_location: Add init/exit/copy functions")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230731091857.10681-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
$ sudo ./perf test 'sample filter' -v
94: perf record sample filtering (by BPF) tests :
--- start ---
test child forked, pid 3817527
Checking BPF-filter privilege
Basic bpf-filter test
Basic bpf-filter test [Success]
Failing bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Failing bpf-filter test [Success]
Group bpf-filter test
Error: task-clock event does not have PERF_SAMPLE_CPU
Error: task-clock event does not have PERF_SAMPLE_CODE_PAGE_SIZE
Group bpf-filter test [Success]
test child finished with 0
---- end ----
perf record sample filtering (by BPF) tests: Ok
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230811025822.3859771-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New features like the BPF --filter support in perf record have made the
BPF event functionality somewhat redundant. As shown by commit
fcb027c1a4f6 ("perf tools: Revert enable indices setting syntax for BPF
map") and commit 14e4b9f428 ("perf trace: Raw augmented syscalls fix
libbpf 1.0+ compatibility") the BPF event support hasn't been well
maintained and it adds considerable complexity in areas like event
parsing, not least as '/' is a separator for event modifiers as well as
in paths.
This patch removes support in the event parser for BPF events and then
the associated functions are removed. This leads to the removal of whole
source files like bpf-loader.c. Removing support means that augmented
syscalls in perf trace is broken, this will be fixed in a later commit
adding support using BPF skeletons.
The removal of BPF events causes an unused label warning from flex
generated code, so update build to ignore it:
```
util/parse-events-flex.c:2704:1: error: label ‘find_rule’ defined but not used [-Werror=unused-label]
2704 | find_rule: /* we branch to this label when backing up */
```
Committer notes:
Extracted from a larger patch that was also removing the support for
linking with libllvm and libclang, that were an alternative to using an
external clang execution to compile the .c event source code into BPF
bytecode.
Testing it:
# perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c'
\___ Bad event or PMU
Unabled to find PMU or event on a PMU of 'home'
Initial error:
event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c'
\___ Cannot find PMU `home'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Carsten Haitzler <carsten.haitzler@arm.com>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: bpf@vger.kernel.org
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230810184853.2860737-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With augmented_raw_syscalls transformed into a BPF skel made the output have a "
around the filenames, which is not what the old perf probe vfs_getname
method of obtaining filenames did, so accept the augmented way, with the
quotes.
At this point probably removing all the logic for the vfs_getname method
is in order, will do it at some point.
For now lets accept with/without quotes and make that test pass.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running on fedora:38 in verbose mode I noticed:
# perf test -v 117
grep: warning: stray \ before /
117: Check open filename arg using perf trace + vfs_getname :
Remove that \ before /.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZNvTDsSMO3nw9Tnp@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat_std_output testcase throws
below warning:
In tests/shell/stat+std_output.sh line 9:
. $(dirname $0)/lib/stat_output.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
In tests/shell/stat+std_output.sh line 32:
local -i cnt=0
^-^ SC2034 (warning): cnt appears unused. Verify use (or export if used externally).
Fixed the warning by adding quotes to avoid word splitting
and removed unused variable "cnt" at line 32.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-27-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat_output.sh throws below warning:
In tests/shell/lib/stat_output.sh line 1:
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
Fixed the warning by adding shell directive.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-25-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck in "lib/waiting.sh" generates below
warning:
In ./tools/perf/tests/shell/lib/waiting.sh line 1:
# SPDX-License-Identifier: GPL-2.0
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
Fix this by adding shebang in the beginning of the script.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-20-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on probe_vfs_getname fails with below
warning:
In ./tools/perf/tests/shell/lib/probe_vfs_getname.sh line 1:
# Arnaldo Carvalho de Melo <acme@kernel.org>, 2017
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
In ./tools/perf/tests/shell/lib/probe_vfs_getname.sh line 14:
local verbose=$1
^-----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
Fix this:
- by adding shebang in the beginning of the file and
- rename variable verbose to "add_probe_verbose" after removing
local
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-19-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the shellcheck warnings for thread_loop_check_tid_10.sh
In ./tools/perf/tests/shell/coresight/thread_loop_check_tid_10.sh line 8:
. $(dirname $0)/../lib/coresight.sh
^-----------^ SC2046 (warning): Quote this to prevent word splitting.
Add quotes to prevent word splitting which are caused by
unquoted command expansions.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-17-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on probe.sh throws below warning:
In lib/probe.sh line 1:
^-- SC2148 (error): Tips depend on target shell and yours is unknown. Add a shebang or a 'shell' directive.
Fixed the warnings by adding shell directive.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-14-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat+shadow_stat.sh generates below warning:
In tests/shell/stat+shadow_stat.sh line 48:
while read cpu num evt hash ipc rest
^--^ SC2034 (warning): hash appears unused. Verify use (or export if used externally).
This variable is intentionally unused since it is needed to parse
through the output. Use "_" as a prefix for this throw away variable.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-11-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat_bpf_counter.sh generates below
warning:
In tests/shell/stat_bpf_counters.sh line 34:
if [ "$base_cycles" == "<not" ]; then
^-- SC3014 (warning): In POSIX sh, == in place of = is undefined.
In tests/shell/stat_bpf_counters.sh line 39:
if [ "$bpf_cycles" == "<not" ]; then
^-- SC3014 (warning): In POSIX sh, == in place of = is undefined.
Fix this by using "=" instead of "==" to work for
all shells.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-10-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on test_perf_data_converter_json.sh throws
below warning:
In tests/shell/test_perf_data_converter_json.sh line 42:
if [ $(cat "${result}" | wc -l) -gt "0" ] ; then
^------------------------^ SC2046 (warning): Quote this to prevent word splitting.
Fixed the warning by adding quotes to avoid word splitting.
ShellCheck result with patch:
# shellcheck -S warning test_perf_data_converter_json.sh
#
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-9-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on stat+csv_summary.sh throws below warnings:
In tests/shell/stat+csv_summary.sh line 26:
while read num event run pct
^-^ SC2034 (warning): num appears unused. Verify use (or export if used externally).
^---^ SC2034 (warning): event appears unused. Verify use (or export if used externally).
^-^ SC2034 (warning): run appears unused. Verify use (or export if used externally).
^-^ SC2034 (warning): pct appears unused. Verify use (or export if used externally).
These variables are intentionally unused since they are needed to parse
through the output. Use "_" as a prefix for these throw away variables.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-8-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck -S on test_arm_spe_fork.sh throws below warnings:
In tests/shell/test_arm_spe_fork.sh line 25:
trap cleanup_files exit term int
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^--^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
^-^ SC3049 (warning): In POSIX sh, using lower/mixed case for signal names is undefined.
Fixed this issue by using uppercase for "EXIT", "TERM" and
"INIT" signals to avoid using lower/mixed case for signal
names as input.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-7-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Running shellcheck on lock_contention.sh generates below warning:
In stat_bpf_counters_cgrp.sh line 28:
if [ -d /sys/fs/cgroup/system.slice -a -d /sys/fs/cgroup/user.slice ]; then
^-- SC2166 (warning): Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
In stat_bpf_counters_cgrp.sh line 34:
local self_cgrp=$(grep perf_event /proc/self/cgroup | cut -d: -f3)
^-------------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
^-------^ SC2155 (warning): Declare and assign separately to avoid masking return values.
^-- SC2046 (warning): Quote this to prevent word splitting.
In stat_bpf_counters_cgrp.sh line 51:
local output
^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
In stat_bpf_counters_cgrp.sh line 65:
local output
^----------^ SC3043 (warning): In POSIX sh, 'local' is undefined.
Fixed above warnings by:
- Changing the expression [p -a q] to [p] && [q].
- Fixing shellcheck warnings for local usage, by prefixing
function name to the variable.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230709182800.53002-6-atrajeev@linux.vnet.ibm.com
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
