The CPUID method of arch_get_tsc_freq fails for older Intel processors,
such as Skylake. Compute using /proc/cpuinfo.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220718164312.3994191-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The TSC frequency information is required for the event metrics with the
literal, system_tsc_freq. For the newer Intel platform, the TSC
frequency information can be retrieved from the CPUID leaf 0x15. If the
TSC frequency information isn't present the /proc/cpuinfo approach is
used.
Refactor cpuid() for this use. Note, the previous stack pushing/popping
approach was broken on x86-64 that has stack red zones that would be
clobbered.
Committer testing:
Before:
$ perf record sleep 0.0001
[ perf record: Woken up 1 times to write data ]
$ perf report --header-only |& grep cpuid
# cpuid : AuthenticAMD,25,33,0
$
After the patch:
$ perf record sleep 0.0001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (8 samples) ]
$ perf report --header-only |& grep cpuid
# cpuid : AuthenticAMD,25,33,0
$
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kshipra Bopardikar <kshipra.bopardikar@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220718164312.3994191-2-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Samples without an L3 miss are discarded and counter is reset with
random value (between 1-15 for fetch PMU and 1-127 for op PMU) when IBS
L3 miss filtering is enabled. This causes a sampling period skew but
there is no way to reconstruct aggregated sampling period. So print a
warning at perf record if user sets l3missonly=1.
Ex:
# perf record -c 10000 -C 0 -e ibs_op/l3missonly=1/
WARNING: Hw internally resets sampling period when L3 Miss Filtering is enabled
and tagged operation does not cause L3 Miss. This causes sampling period skew.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: like.xu.linux@gmail.com
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20220604044519.594-2-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the hardware TopDown metrics feature, the sample-read feature should
be supported for a TopDown group, e.g., sample a non-topdown event and read
a Topdown metric group. But the current perf record code errors are out.
For a TopDown metric group,the slots event must be the leader of the group,
but the leader slots event doesn't support sampling. To support sample-read
the TopDown metric group, uses the 2nd event of the group as the "leader"
for the purposes of sampling.
Only the platform with the TopDown metric feature supports sample-read the
topdown group. In commit acb65150a4 ("perf record: Support sample-read
topdown metric group"), it adds arch_topdown_sample_read() to indicate
whether the TopDown group supports sample-read, it should only work on the
non-hybrid systems, this patch extends the support for hybrid platforms.
Before:
# ./perf record -e "{cpu_core/slots/,cpu_core/cycles/,cpu_core/topdown-retiring/}:S" -a sleep 1
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cpu_core/topdown-retiring/).
/bin/dmesg | grep -i perf may provide additional information.
After:
# ./perf record -e "{cpu_core/slots/,cpu_core/cycles/,cpu_core/topdown-retiring/}:S" -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.238 MB perf.data (369 samples) ]
Fixes: acb65150a4 ("perf record: Support sample-read topdown metric group")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220602153603.1884710-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For the hybrid system, the "slots" event changes to "cpu_core/slots/", need
extend API arch_evsel__must_be_in_group() to support hybrid systems.
In the origin code, for hybrid system event "cpu_core/slots/", the output
of the API arch_evsel__must_be_in_group() is "false" (in fact,it should be
"true"). Currently only one API evsel__remove_from_group() calls it. In
evsel__remove_from_group(), it adds the second condition to check, so the
output of evsel__remove_from_group() still is correct. That's the reason
why there isn't an instant error. I'd like to fix the issue found in API
arch_evsel__must_be_in_group() in case someone else using the function in
the other place.
Fixes: d98079c05b ("perf evlist: Keep topdown counters in weak group")
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220601152544.1842447-1-zhengjun.xing@linux.intel.com
Cc: peterz@infradead.org
Cc: adrian.hunter@intel.com
Cc: alexander.shishkin@intel.com
Cc: acme@kernel.org
Cc: ak@linux.intel.com
Cc: jolsa@redhat.com
Cc: mingo@redhat.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
User space tasks can migrate between CPUs, so when tracing selected CPUs,
sideband for all CPUs is still needed. This is in preparation for allowing
system-wide events on all CPUs while the user requested events are on only
user requested CPUs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220524075436.29144-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use evlist__add_dummy_on_all_cpus() for switch tracking in preparation for
allowing system-wide events on all CPUs while the user requested events are
on only user requested CPUs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220524075436.29144-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The X86 specific arch__intr_reg_mask() is to check whether the kernel
and hardware can collect XMM registers. But it doesn't work on some
hybrid platform.
Without the patch on ADL-N:
$ perf record -I?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
R11 R12 R13 R14 R15
The config of the test event doesn't contain the PMU information. The
kernel may fail to initialize it on the correct hybrid PMU and return
the wrong non-supported information.
Add the PMU information into the config for the hybrid platform. The
same register set is supported among different hybrid PMUs. Checking
the first available one is good enough.
With the patch on ADL-N:
$ perf record -I?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
R11 R12 R13 R14 R15 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 XMM9
XMM10 XMM11 XMM12 XMM13 XMM14 XMM15
Fixes: 6466ec14aa ("perf regs x86: Add X86 specific arch__intr_reg_mask()")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518145125.1494156-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 94dbfd6781 ("perf parse-events: Architecture specific
leader override") introduced a feature to reorder the slots event to
fulfill the restriction of the perf metrics topdown group. But the
feature doesn't work on the hybrid machine.
$ perf stat -e "{cpu_core/instructions/,cpu_core/slots/,cpu_core/topdown-retiring/}" -a sleep 1
Performance counter stats for 'system wide':
<not counted> cpu_core/instructions/
<not counted> cpu_core/slots/
<not supported> cpu_core/topdown-retiring/
1.002871801 seconds time elapsed
A hybrid platform has a different PMU name for the core PMUs, while
current perf hard code the PMU name "cpu".
Introduce a new function to check whether the system supports the perf
metrics feature. The result is cached for the future usage.
For X86, the core PMU name always has "cpu" prefix.
With the patch:
$ perf stat -e "{cpu_core/instructions/,cpu_core/slots/,cpu_core/topdown-retiring/}" -a sleep 1
Performance counter stats for 'system wide':
76,337,010 cpu_core/slots/
10,416,809 cpu_core/instructions/
11,692,372 cpu_core/topdown-retiring/
1.002805453 seconds time elapsed
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-5-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evsel->name may have a different format for a topdown event, a pure
topdown name (e.g., topdown-fe-bound), or a PMU name + a topdown name
(e.g., cpu/topdown-fe-bound/). The cpu/topdown-fe-bound/ kind format
isn't supported by the arch_evlist__leader(). This format is a very
common format for a hybrid platform, which requires specifying the PMU
name for each event.
Without the patch,
$ perf stat -e '{instructions,slots,cpu/topdown-fe-bound/}' -a sleep 1
Performance counter stats for 'system wide':
<not counted> instructions
<not counted> slots
<not supported> cpu/topdown-fe-bound/
1.003482041 seconds time elapsed
Some events weren't counted. Try disabling the NMI watchdog:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
The events in group usually have to be from the same PMU. Try reorganizing the group.
With the patch,
$ perf stat -e '{instructions,slots,cpu/topdown-fe-bound/}' -a sleep 1
Performance counter stats for 'system wide':
157,383,996 slots
25,011,711 instructions
27,441,686 cpu/topdown-fe-bound/
1.003530890 seconds time elapsed
Fixes: bc355822f0 ("perf parse-events: Move slots only with topdown")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-4-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The patch ("perf evlist: Keep topdown counters in weak group") fixes the
perf metrics topdown event issue when the topdown events are in a weak
group on a non-hybrid platform. However, it doesn't work for the hybrid
platform.
$./perf stat -e '{cpu_core/slots/,cpu_core/topdown-bad-spec/,
cpu_core/topdown-be-bound/,cpu_core/topdown-fe-bound/,
cpu_core/topdown-retiring/,cpu_core/branch-instructions/,
cpu_core/branch-misses/,cpu_core/bus-cycles/,cpu_core/cache-misses/,
cpu_core/cache-references/,cpu_core/cpu-cycles/,cpu_core/instructions/,
cpu_core/mem-loads/,cpu_core/mem-stores/,cpu_core/ref-cycles/,
cpu_core/cache-misses/,cpu_core/cache-references/}:W' -a sleep 1
Performance counter stats for 'system wide':
751,765,068 cpu_core/slots/ (84.07%)
<not supported> cpu_core/topdown-bad-spec/
<not supported> cpu_core/topdown-be-bound/
<not supported> cpu_core/topdown-fe-bound/
<not supported> cpu_core/topdown-retiring/
12,398,197 cpu_core/branch-instructions/ (84.07%)
1,054,218 cpu_core/branch-misses/ (84.24%)
539,764,637 cpu_core/bus-cycles/ (84.64%)
14,683 cpu_core/cache-misses/ (84.87%)
7,277,809 cpu_core/cache-references/ (77.30%)
222,299,439 cpu_core/cpu-cycles/ (77.28%)
63,661,714 cpu_core/instructions/ (84.85%)
0 cpu_core/mem-loads/ (77.29%)
12,271,725 cpu_core/mem-stores/ (77.30%)
542,241,102 cpu_core/ref-cycles/ (84.85%)
8,854 cpu_core/cache-misses/ (76.71%)
7,179,013 cpu_core/cache-references/ (76.31%)
1.003245250 seconds time elapsed
A hybrid platform has a different PMU name for the core PMUs, while
the current perf hard code the PMU name "cpu".
The evsel->pmu_name can be used to replace the "cpu" to fix the issue.
For a hybrid platform, the pmu_name must be non-NULL. Because there are
at least two core PMUs. The PMU has to be specified.
For a non-hybrid platform, the pmu_name may be NULL. Because there is
only one core PMU, "cpu". For a NULL pmu_name, we can safely assume that
it is a "cpu" PMU.
In case other PMUs also define the "slots" event, checking the PMU type
as well.
With the patch,
$ perf stat -e '{cpu_core/slots/,cpu_core/topdown-bad-spec/,
cpu_core/topdown-be-bound/,cpu_core/topdown-fe-bound/,
cpu_core/topdown-retiring/,cpu_core/branch-instructions/,
cpu_core/branch-misses/,cpu_core/bus-cycles/,cpu_core/cache-misses/,
cpu_core/cache-references/,cpu_core/cpu-cycles/,cpu_core/instructions/,
cpu_core/mem-loads/,cpu_core/mem-stores/,cpu_core/ref-cycles/,
cpu_core/cache-misses/,cpu_core/cache-references/}:W' -a sleep 1
Performance counter stats for 'system wide':
766,620,266 cpu_core/slots/ (84.06%)
73,172,129 cpu_core/topdown-bad-spec/ # 9.5% bad speculation (84.06%)
193,443,341 cpu_core/topdown-be-bound/ # 25.0% backend bound (84.06%)
403,940,929 cpu_core/topdown-fe-bound/ # 52.3% frontend bound (84.06%)
102,070,237 cpu_core/topdown-retiring/ # 13.2% retiring (84.06%)
12,364,429 cpu_core/branch-instructions/ (84.03%)
1,080,124 cpu_core/branch-misses/ (84.24%)
564,120,383 cpu_core/bus-cycles/ (84.65%)
36,979 cpu_core/cache-misses/ (84.86%)
7,298,094 cpu_core/cache-references/ (77.30%)
227,174,372 cpu_core/cpu-cycles/ (77.31%)
63,886,523 cpu_core/instructions/ (84.87%)
0 cpu_core/mem-loads/ (77.31%)
12,208,782 cpu_core/mem-stores/ (77.31%)
566,409,738 cpu_core/ref-cycles/ (84.87%)
23,118 cpu_core/cache-misses/ (76.71%)
7,212,602 cpu_core/cache-references/ (76.29%)
1.003228667 seconds time elapsed
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a flag needs_auxtrace_mmap to record whether an auxtrace mmap is
needed, in preparation for correctly determining whether or not an
auxtrace mmap is needed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220506122601.367589-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
evlist contains cpus and all_cpus. all_cpus is the union of the cpu maps
of all evsels.
For non-task targets, cpus is set to be cpus requested from the command
line, defaulting to all online cpus if no cpus are specified.
For an uncore event, all_cpus may be just CPU 0 or every online CPU.
This causes all_cpus to have fewer values than the cpus variable which
is confusing given the 'all' in the name.
To try to make the behavior clearer, rename cpus to user_requested_cpus
and add comments on the two struct variables.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: John Garry <john.garry@huawei.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220328232648.2127340-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If slots isn't with a topdown event then moving it is unnecessary. For
example {instructions, slots} is re-ordered:
$ perf stat -e '{instructions,slots}' -a sleep 1
Performance counter stats for 'system wide':
936,600,825 slots
144,440,968 instructions
1.006061423 seconds time elapsed
Which can break tools expecting the command line order to match the
printed order. It is necessary to move the slots event first when it
appears with topdown events. Add extra checking so that the slots event
is only moved in the case of there being a topdown event like:
$ perf stat -e '{instructions,slots,topdown-fe-bound}' -a sleep 1
Performance counter stats for 'system wide':
2427568570 slots
300927614 instructions
551021649 topdown-fe-bound
1.001771803 seconds time elapsed
Fixes: 94dbfd6781 ("perf parse-events: Architecture specific leader override")
Reported-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220321223344.1034479-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An issue with icelakex metrics:
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json?h=perf/core&id=65eab2bc7dab326ee892ec5a4c749470b368b51a#n48
That causes the slots not to be first.
Fixes: 94dbfd6781 ("perf parse-events: Architecture specific leader override")
Reported-by: Caleb Biggers <caleb.biggers@intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220317224309.543736-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The change to the MODE.Exec packet means processing must distinguish
between the old and new cases. Record the Event Trace capability flag to
make that possible.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
struct maps is reference counted, using a pointer is more idiomatic.
Committer notes:
Delay:
maps = machine__kernel_maps(&vmlinux);
To after:
machine__init(&vmlinux, "", HOST_KERNEL_ID);
To avoid this on f34:
In file included from /var/home/acme/git/perf/tools/perf/util/build-id.h:10,
from /var/home/acme/git/perf/tools/perf/util/dso.h:13,
from tests/vmlinux-kallsyms.c:8:
In function ‘machine__kernel_maps’,
inlined from ‘test__vmlinux_matches_kallsyms’ at tests/vmlinux-kallsyms.c:122:22:
/var/home/acme/git/perf/tools/perf/util/machine.h:86:23: error: ‘vmlinux.kmaps’ is used uninitialized [-Werror=uninitialized]
86 | return machine->kmaps;
| ~~~~~~~^~~~~~~
tests/vmlinux-kallsyms.c: In function ‘test__vmlinux_matches_kallsyms’:
tests/vmlinux-kallsyms.c:121:34: note: ‘vmlinux’ declared here
121 | struct machine kallsyms, vmlinux;
| ^~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Hao Luo <haoluo@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lore.kernel.org/lkml/20220211103415.2737789-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently topdown events must appear after a slots event:
$ perf stat -e '{slots,topdown-fe-bound}' /bin/true
Performance counter stats for '/bin/true':
3,183,090 slots
986,133 topdown-fe-bound
Reversing the events yields:
$ perf stat -e '{topdown-fe-bound,slots}' /bin/true
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (topdown-fe-bound).
For metrics the order of events is determined by iterating over a
hashmap, and so slots isn't guaranteed to be first which can yield this
error.
Change the set_leader in parse-events, called when a group is closed, so
that rather than always making the first event the leader, if the slots
event exists then it is made the leader. It is then moved to the head of
the evlist otherwise it won't be opened in the correct order.
The result is:
$ perf stat -e '{topdown-fe-bound,slots}' /bin/true
Performance counter stats for '/bin/true':
3,274,795 slots
1,001,702 topdown-fe-bound
A problem with this approach is the slots event is identified by name,
names can be overwritten like 'cpu/slots,name=foo/' and this causes the
leader change to fail.
The change also modifies and fixes mixed groups like, with the change:
$ perf stat -e '{instructions,slots,topdown-fe-bound}' -a -- sleep 2
Performance counter stats for 'system wide':
5574985410 slots
971981616 instructions
1348461887 topdown-fe-bound
2.001263120 seconds time elapsed
Without the change:
$ perf stat -e '{instructions,slots,topdown-fe-bound}' -a -- sleep 2
Performance counter stats for 'system wide':
<not counted> instructions
<not counted> slots
<not supported> topdown-fe-bound
2.006247990 seconds time elapsed
Something that may be undesirable here is that the events are reordered
in the output.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vineet Singh <vineet.singh@intel.com>
Link: http://lore.kernel.org/lkml/20211130174945.247604-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf tool sets exclude_guest by default while calling perf_event_open().
Because IBS does not have filtering capability, it always gets rejected
by IBS PMU driver and thus perf falls back to non-precise sampling. Fix
it by not setting exclude_guest by default on AMD.
Before:
$ sudo ./perf record -C 0 -vvv true |& grep precise
precise_ip 3
decreasing precise_ip by one (2)
precise_ip 2
decreasing precise_ip by one (1)
precise_ip 1
decreasing precise_ip by one (0)
After:
$ sudo ./perf record -C 0 -vvv true |& grep precise
precise_ip 3
decreasing precise_ip by one (2)
precise_ip 2
Committer notes:
Fixup init to zero for perf_env in older compilers:
arch/x86/util/evsel.c:15:26: error: missing field 'os_release' initializer [-Werror,-Wmissing-field-initializers]
struct perf_env env = {0};
^
Committer notes:
Namhyung remarked:
It'd be nice if it can cover explicit "-e cycles:pp" as well.
Ravi clarified:
For explicit :pp modifier, evsel->precise_max does not get set and thus perf
does not try with different attr->precise_ip values while exclude_guest set.
So no issue with explicit :pp:
$ sudo ./perf record -C 0 -e cycles:pp -vvv |& grep "precise_ip\|exclude_guest"
precise_ip 2
exclude_guest 1
precise_ip 2
exclude_guest 1
switching off exclude_guest, exclude_host
precise_ip 2
^C
Also, with :P modifier, evsel->precise_max gets set but exclude_guest does
not and thus :P also works fine:
$ sudo ./perf record -C 0 -e cycles:P -vvv |& grep "precise_ip\|exclude_guest"
precise_ip 3
decreasing precise_ip by one (2)
precise_ip 2
^C
Reported-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211103072112.32312-1-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the 'perf iostat' user specifies two or more iio_root_ports and also
specifies the cpu(s) by -C which is not *connected to all* the above iio
ports, the iostat_print_metric() will run into trouble:
For example:
$ perf iostat list
S0-uncore_iio_0<0000:16>
S1-uncore_iio_0<0000:97> # <--- CPU 1 is located in the socket S0
$ perf iostat 0000:16,0000:97 -C 1 -- ls
port Inbound Read(MB) Inbound Write(MB) Outbound Read(MB) Outbound
Write(MB) ../perf-iostat: line 12: 104418 Segmentation fault
(core dumped) perf stat --iostat$DELIMITER$*
The core-dump stack says, in the above corner case, the returned
(struct perf_counts_values *) count will be NULL, and the caller
iostat_print_metric() apparently doesn't not handle this case.
433 struct perf_counts_values *count = perf_counts(evsel->counts, die, 0);
434
435 if (count->run && count->ena) {
(gdb) p count
$1 = (struct perf_counts_values *) 0x0
The deeper reason is that there are actually no statistics from the user
specified pair "iostat 0000:X, -C (disconnected) Y ", but let's fix it with
minimum cost by adding a NULL check in the user space.
Fixes: f9ed693e8b ("perf stat: Enable iostat mode for x86 platforms")
Signed-off-by: Like Xu <likexu@tencent.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210927081115.39568-2-likexu@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A perf uncore PMU may have two PMU names, a real name and an alias. The
alias is exported at /sys/bus/event_source/devices/uncore_*/alias.
The perf tool should support the alias as well.
Add alias_name in the struct perf_pmu to store the alias. For the PMU
which doesn't have an alias. It's NULL.
Introduce two X86 specific functions to retrieve the real name and the
alias separately.
Only go through the sysfs to retrieve the mapping between the real name
and the alias once. The result is cached in a list, uncore_pmu_list.
Nothing changed for the other ARCHs.
With the patch, the perf tool can monitor the PMU with either the real
name or the alias.
Use the real name,
$ perf stat -e uncore_cha_2/event=1/ -x,
4044879584,,uncore_cha_2/event=1/,2528059205,100.00,,
Use the alias,
$ perf stat -e uncore_type_0_2/event=1/ -x,
3659675336,,uncore_type_0_2/event=1/,2287306455,100.00,,
Committer notes:
Rename 'struct perf_pmu_alias_name' to 'pmu_alias', the 'perf_' prefix
should be used for libperf, things inside just tools/perf/ are being
moved away from that prefix.
Also 'pmu_alias' is shorter and reflects the abstraction.
Also don't use 'pmu' as the name for variables for that type, we should
use that for the 'struct perf_pmu' variables, avoiding confusion. Use
'pmu_alias' for 'struct pmu_alias' variables.
Co-developed-by: Jin Yao <yao.jin@linux.intel.com>
Co-developed-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: http://lore.kernel.org/lkml/20210902065955.1299-2-yao.jin@linux.intel.com
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Topdown Microarchitecture Analysis (TMA) Method is a structured
analysis methodology to identify critical performance bottlenecks in
out-of-order processors.
The Topdown metrics L1 event was added as default in 42641d6f4d
("perf stat: Add Topdown metrics events as default events")
From the Sapphire Rapids server and later platforms, the same dedicated
"metrics" register is extended to support both L1 and L2 events.
Add both L1 and L2 Topdown metrics events as default to enrich the
default measuring information if the new measurement register is
available.
On legacy systems there is no change to avoid extra multiplexing.
The topdown_level indicates the max metrics level for the top-down
statistics. Set it to 2 to display all L1 and L2 Topdown metrics events.
With the patch:
$ perf stat sleep 1
Performance counter stats for 'sleep 1':
0.59 msec task-clock # 0.001 CPUs utilized
1 context-switches # 1.687 K/sec
0 cpu-migrations # 0.000 /sec
76 page-faults # 128.198 K/sec
1,405,318 cycles # 2.371 GHz
1,471,136 instructions # 1.05 insn per cycle
310,132 branches # 523.136 M/sec
10,435 branch-misses # 3.36% of all branches
8,431,908 slots # 14.223 G/sec
1,554,116 topdown-retiring # 18.4% retiring
1,289,585 topdown-bad-spec # 15.2% bad speculation
2,810,636 topdown-fe-bound # 33.2% frontend bound
2,810,636 topdown-be-bound # 33.2% backend bound
231,464 topdown-heavy-ops # 2.7% heavy operations # 15.6% light operations
1,223,453 topdown-br-mispredict # 14.5% branch mispredict # 0.8% machine clears
1,884,779 topdown-fetch-lat # 22.3% fetch latency # 10.9% fetch bandwidth
1,454,917 topdown-mem-bound # 17.2% memory bound # 16.0% Core bound
1.001179699 seconds time elapsed
0.000000000 seconds user
0.001238000 seconds sys
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/1625760169-18396-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move evsel::idx to perf_evsel::idx, so we can move the group interface
to libperf.
Committer notes:
Fixup evsel->idx usage in tools/perf/util/bpf_counter_cgroup.c, that
appeared in my tree in my local tree.
Also fixed up these:
$ find tools/perf/ -name "*.[ch]" | xargs grep 'evsel->idx'
tools/perf/ui/gtk/annotate.c: evsel->idx + i);
tools/perf/ui/gtk/annotate.c: evsel->idx);
$
That running 'make -C tools/perf build-test' caught.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210706151704.73662-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For enabling mem-store event, it doesn't need an auxiliary event.
So just build an event name string with the pmu prefix.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210527001610.10553-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_mem_events__name() can generate the mem-load event name.
It uses a variable 'mem_loads_name__init' to avoid generating the
event name every time (because perf_pmu__scan takes some time).
The perf_mem_events__name() assumes the pmu is "cpu" but it's not
correct for hybrid platform. For Alderlake, the pmu is "cpu_core" or
"cpu_atom"
Introduce a new parameter 'pmu_name' in perf_mem_events__name
to let the caller specify a pmu name.
Considering such event name is x86 specific, so move
perf_mem_events[] to arch/x86/util/mem-events.c.
We still keep the variable 'mem_loads_name__init' but it's only
used when pmu_name is NULL (compatible for original behavior). When
pmu_name is not NULL (e.g. "cpu_core"), this patch doesn't have
optimization. That can be implemented in follow up patch.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210527001610.10553-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For some platforms, an auxiliary event has to be enabled
simultaneously with the load latency event.
For Alderlake, the auxiliary event is created in "cpu_core" pmu.
So first we need to check the existing of "cpu_core" pmu
and then check if this pmu has auxiliary event.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210527001610.10553-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
usage:
- kvm stat
run a command and gather performance counter statistics
- show the result:
perf kvm stat report --event=msr
See the msr events:
Analyze events for all VMs, all VCPUs:
MSR Access Samples Samples% Time% Min Time Max Time Avg time
0x6e0:W 67007 98.17% 98.31% 0.59us 10.69us 0.90us ( +- 0.10% )
0x830:W 1186 1.74% 1.60% 0.53us 108.34us 0.82us ( +- 11.02% )
0x3b:R 66 0.10% 0.09% 0.56us 1.26us 0.80us ( +- 3.24% )
Total Samples:68259, Total events handled time:61150.95us.
Signed-off-by: Lei Zhao <zhaolei27@baidu.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1618470001-7239-1-git-send-email-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf stat:
- Add support for hybrid PMUs to support systems such as Intel Alderlake
and its BIG/little core/atom cpus.
- Introduce 'bperf' to share hardware PMCs with BPF.
- New --iostat option to collect and present IO stats on Intel hardware.
This functionality is based on recently introduced sysfs attributes
for Intel® Xeon® Scalable processor family (code name Skylake-SP):
commit bb42b3d397 ("perf/x86/intel/uncore: Expose an Uncore unit to IIO PMON mapping")
It is intended to provide four I/O performance metrics in MB per each
PCIe root port:
- Inbound Read: I/O devices below root port read from the host memory
- Inbound Write: I/O devices below root port write to the host memory
- Outbound Read: CPU reads from I/O devices below root port
- Outbound Write: CPU writes to I/O devices below root port
- Align CSV output for summary.
- Clarify --null use cases: Assess raw overhead of 'perf stat' or
measure just wall clock time.
- Improve readability of shadow stats.
perf record:
- Change the COMM when starting tha workload so that --exclude-perf
doesn't seem to be not honoured.
- Improve 'Workload failed' message printing events + what was exec'ed.
- Fix cross-arch support for TIME_CONV.
perf report:
- Add option to disable raw event ordering.
- Dump the contents of PERF_RECORD_TIME_CONV in 'perf report -D'.
- Improvements to --stat output, that shows information about PERF_RECORD_ events.
- Preserve identifier id in OCaml demangler.
perf annotate:
- Show full source location with 'l' hotkey in the 'perf annotate' TUI.
- Add line number like in TUI and source location at EOL to the 'perf annotate' --stdio mode.
- Add --demangle and --demangle-kernel to 'perf annotate'.
- Allow configuring annotate.demangle{,_kernel} in 'perf config'.
- Fix sample events lost in stdio mode.
perf data:
- Allow converting a perf.data file to JSON.
libperf:
- Add support for user space counter access.
- Update topdown documentation to permit rdpmc calls.
perf test:
- Add 'perf test' for 'perf stat' CSV output.
- Add 'perf test' entries to test the hybrid PMU support.
- Cleanup 'perf test daemon' if its 'perf test' is interrupted.
- Handle metric reuse in pmu-events parsing 'perf test' entry.
- Add test for PE executable support.
- Add timeout for wait for daemon start in its 'perf test' entries.
Build:
- Enable libtraceevent dynamic linking.
- Improve feature detection output.
- Fix caching of feature checks caching.
- First round of updates for tools copies of kernel headers.
- Enable warnings when compiling BPF programs.
Vendor specific events:
Intel:
- Add missing skylake & icelake model numbers.
arm64:
- Add Hisi hip08 L1, L2 and L3 metrics.
- Add Fujitsu A64FX PMU events.
PowerPC:
- Initial JSON/events list for power10 platform.
- Remove unsupported power9 metrics.
AMD:
- Add Zen3 events.
- Fix broken L2 Cache Hits from L2 HWPF metric.
- Use lowercases for all the eventcodes and umasks.
Hardware tracing:
arm64:
- Update CoreSight ETM metadata format.
- Fix bitmap for CS-ETM option.
- Support PID tracing in config.
- Detect pid in VMID for kernel running at EL2.
Arch specific:
MIPS:
- Support MIPS unwinding and dwarf-regs.
- Generate mips syscalls_n64.c syscall table.
PowerPC:
- Add support for PERF_SAMPLE_WEIGH_STRUCT on PowerPC.
- Support pipeline stage cycles for powerpc.
libbeauty:
- Fix fsconfig generator.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYIshAwAKCRCyPKLppCJ+
J8oWAP9c1POclDQ7AZDe5/t/InZYSQKJFIku1sE1SNCSOupy7wEAuPBtaN7wDaRj
BFBibfUGd4MNzLPvMMHneIhSY3DgJwg=
=FLLr
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.13-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"perf stat:
- Add support for hybrid PMUs to support systems such as Intel
Alderlake and its BIG/little core/atom cpus.
- Introduce 'bperf' to share hardware PMCs with BPF.
- New --iostat option to collect and present IO stats on Intel
hardware.
This functionality is based on recently introduced sysfs attributes
for Intel® Xeon® Scalable processor family (code name Skylake-SP)
in commit bb42b3d397 ("perf/x86/intel/uncore: Expose an Uncore
unit to IIO PMON mapping")
It is intended to provide four I/O performance metrics in MB per
each PCIe root port:
- Inbound Read: I/O devices below root port read from the host memory
- Inbound Write: I/O devices below root port write to the host memory
- Outbound Read: CPU reads from I/O devices below root port
- Outbound Write: CPU writes to I/O devices below root port
- Align CSV output for summary.
- Clarify --null use cases: Assess raw overhead of 'perf stat' or
measure just wall clock time.
- Improve readability of shadow stats.
perf record:
- Change the COMM when starting tha workload so that --exclude-perf
doesn't seem to be not honoured.
- Improve 'Workload failed' message printing events + what was
exec'ed.
- Fix cross-arch support for TIME_CONV.
perf report:
- Add option to disable raw event ordering.
- Dump the contents of PERF_RECORD_TIME_CONV in 'perf report -D'.
- Improvements to --stat output, that shows information about
PERF_RECORD_ events.
- Preserve identifier id in OCaml demangler.
perf annotate:
- Show full source location with 'l' hotkey in the 'perf annotate'
TUI.
- Add line number like in TUI and source location at EOL to the 'perf
annotate' --stdio mode.
- Add --demangle and --demangle-kernel to 'perf annotate'.
- Allow configuring annotate.demangle{,_kernel} in 'perf config'.
- Fix sample events lost in stdio mode.
perf data:
- Allow converting a perf.data file to JSON.
libperf:
- Add support for user space counter access.
- Update topdown documentation to permit rdpmc calls.
perf test:
- Add 'perf test' for 'perf stat' CSV output.
- Add 'perf test' entries to test the hybrid PMU support.
- Cleanup 'perf test daemon' if its 'perf test' is interrupted.
- Handle metric reuse in pmu-events parsing 'perf test' entry.
- Add test for PE executable support.
- Add timeout for wait for daemon start in its 'perf test' entries.
Build:
- Enable libtraceevent dynamic linking.
- Improve feature detection output.
- Fix caching of feature checks caching.
- First round of updates for tools copies of kernel headers.
- Enable warnings when compiling BPF programs.
Vendor specific events:
- Intel:
- Add missing skylake & icelake model numbers.
- arm64:
- Add Hisi hip08 L1, L2 and L3 metrics.
- Add Fujitsu A64FX PMU events.
- PowerPC:
- Initial JSON/events list for power10 platform.
- Remove unsupported power9 metrics.
- AMD:
- Add Zen3 events.
- Fix broken L2 Cache Hits from L2 HWPF metric.
- Use lowercases for all the eventcodes and umasks.
Hardware tracing:
- arm64:
- Update CoreSight ETM metadata format.
- Fix bitmap for CS-ETM option.
- Support PID tracing in config.
- Detect pid in VMID for kernel running at EL2.
Arch specific updates:
- MIPS:
- Support MIPS unwinding and dwarf-regs.
- Generate mips syscalls_n64.c syscall table.
- PowerPC:
- Add support for PERF_SAMPLE_WEIGH_STRUCT on PowerPC.
- Support pipeline stage cycles for powerpc.
libbeauty:
- Fix fsconfig generator"
* tag 'perf-tools-for-v5.13-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (132 commits)
perf build: Defer printing detected features to the end of all feature checks
tools build: Allow deferring printing the results of feature detection
perf build: Regenerate the FEATURE_DUMP file after extra feature checks
perf session: Dump PERF_RECORD_TIME_CONV event
perf session: Add swap operation for event TIME_CONV
perf jit: Let convert_timestamp() to be backwards-compatible
perf tools: Change fields type in perf_record_time_conv
perf tools: Enable libtraceevent dynamic linking
perf Documentation: Document intel-hybrid support
perf tests: Skip 'perf stat metrics (shadow stat) test' for hybrid
perf tests: Support 'Convert perf time to TSC' test for hybrid
perf tests: Support 'Session topology' test for hybrid
perf tests: Support 'Parse and process metrics' test for hybrid
perf tests: Support 'Track with sched_switch' test for hybrid
perf tests: Skip 'Setup struct perf_event_attr' test for hybrid
perf tests: Add hybrid cases for 'Roundtrip evsel->name' test
perf tests: Add hybrid cases for 'Parse event definition strings' test
perf record: Uniquify hybrid event name
perf stat: Warn group events from different hybrid PMU
perf stat: Filter out unmatched aggregation for hybrid event
...
- Improve Intel uncore PMU support:
- Parse uncore 'discovery tables' - a new hardware capability enumeration method
introduced on the latest Intel platforms. This table is in a well-defined PCI
namespace location and is read via MMIO. It is organized in an rbtree.
These uncore tables will allow the discovery of standard counter blocks, but
fancier counters still need to be enumerated explicitly.
- Add Alder Lake support
- Improve IIO stacks to PMON mapping support on Skylake servers
- Add Intel Alder Lake PMU support - which requires the introduction of 'hybrid' CPUs
and PMUs. Alder Lake is a mix of Golden Cove ('big') and Gracemont ('small' - Atom derived)
cores.
The CPU-side feature set is entirely symmetrical - but on the PMU side there's
core type dependent PMU functionality.
- Reduce data loss with CPU level hardware tracing on Intel PT / AUX profiling, by
fixing the AUX allocation watermark logic.
- Improve ring buffer allocation on NUMA systems
- Put 'struct perf_event' into their separate kmem_cache pool
- Add support for synchronous signals for select perf events. The immediate motivation
is to support low-overhead sampling-based race detection for user-space code. The
feature consists of the following main changes:
- Add thread-only event inheritance via perf_event_attr::inherit_thread, which limits
inheritance of events to CLONE_THREAD.
- Add the ability for events to not leak through exec(), via perf_event_attr::remove_on_exec.
- Allow the generation of SIGTRAP via perf_event_attr::sigtrap, extend siginfo with an u64
::si_perf, and add the breakpoint information to ::si_addr and ::si_perf if the event is
PERF_TYPE_BREAKPOINT.
The siginfo support is adequate for breakpoints right now - but the new field can be used
to introduce support for other types of metadata passed over siginfo as well.
- Misc fixes, cleanups and smaller updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NhQ7
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event updates from Ingo Molnar:
- Improve Intel uncore PMU support:
- Parse uncore 'discovery tables' - a new hardware capability
enumeration method introduced on the latest Intel platforms. This
table is in a well-defined PCI namespace location and is read via
MMIO. It is organized in an rbtree.
These uncore tables will allow the discovery of standard counter
blocks, but fancier counters still need to be enumerated
explicitly.
- Add Alder Lake support
- Improve IIO stacks to PMON mapping support on Skylake servers
- Add Intel Alder Lake PMU support - which requires the introduction of
'hybrid' CPUs and PMUs. Alder Lake is a mix of Golden Cove ('big')
and Gracemont ('small' - Atom derived) cores.
The CPU-side feature set is entirely symmetrical - but on the PMU
side there's core type dependent PMU functionality.
- Reduce data loss with CPU level hardware tracing on Intel PT / AUX
profiling, by fixing the AUX allocation watermark logic.
- Improve ring buffer allocation on NUMA systems
- Put 'struct perf_event' into their separate kmem_cache pool
- Add support for synchronous signals for select perf events. The
immediate motivation is to support low-overhead sampling-based race
detection for user-space code. The feature consists of the following
main changes:
- Add thread-only event inheritance via
perf_event_attr::inherit_thread, which limits inheritance of
events to CLONE_THREAD.
- Add the ability for events to not leak through exec(), via
perf_event_attr::remove_on_exec.
- Allow the generation of SIGTRAP via perf_event_attr::sigtrap,
extend siginfo with an u64 ::si_perf, and add the breakpoint
information to ::si_addr and ::si_perf if the event is
PERF_TYPE_BREAKPOINT.
The siginfo support is adequate for breakpoints right now - but the
new field can be used to introduce support for other types of
metadata passed over siginfo as well.
- Misc fixes, cleanups and smaller updates.
* tag 'perf-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
signal, perf: Add missing TRAP_PERF case in siginfo_layout()
signal, perf: Fix siginfo_t by avoiding u64 on 32-bit architectures
perf/x86: Allow for 8<num_fixed_counters<16
perf/x86/rapl: Add support for Intel Alder Lake
perf/x86/cstate: Add Alder Lake CPU support
perf/x86/msr: Add Alder Lake CPU support
perf/x86/intel/uncore: Add Alder Lake support
perf: Extend PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE
perf/x86/intel: Add Alder Lake Hybrid support
perf/x86: Support filter_match callback
perf/x86/intel: Add attr_update for Hybrid PMUs
perf/x86: Add structures for the attributes of Hybrid PMUs
perf/x86: Register hybrid PMUs
perf/x86: Factor out x86_pmu_show_pmu_cap
perf/x86: Remove temporary pmu assignment in event_init
perf/x86/intel: Factor out intel_pmu_check_extra_regs
perf/x86/intel: Factor out intel_pmu_check_event_constraints
perf/x86/intel: Factor out intel_pmu_check_num_counters
perf/x86: Hybrid PMU support for extra_regs
perf/x86: Hybrid PMU support for event constraints
...
This functionality is based on recently introduced sysfs attributes for
Intel® Xeon® Scalable processor family (code name Skylake-SP):
Commit bb42b3d397 ("perf/x86/intel/uncore: Expose an Uncore unit to IIO PMON mapping")
Mode is intended to provide four I/O performance metrics in MB per each
PCIe root port:
- Inbound Read: I/O devices below root port read from the host memory
- Inbound Write: I/O devices below root port write to the host memory
- Outbound Read: CPU reads from I/O devices below root port
- Outbound Write: CPU writes to I/O devices below root port
Each metric requiries only one uncore event which increments at every 4B
transfer in corresponding direction. The formulas to compute metrics
are generic:
#EventCount * 4B / (1024 * 1024)
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210419094147.15909-4-alexander.antonov@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce helper functions to control PCIe root ports list.
These helpers will be used in the follow-up patch.
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210419094147.15909-3-alexander.antonov@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Turns out, the default setting of attr.aux_watermark to half of the total
buffer size is not very useful, especially with smaller buffers. The
problem is that, after half of the buffer is filled up, the kernel updates
->aux_head and sets up the next "transaction", while observing that
->aux_tail is still zero (as userspace haven't had the chance to update
it), meaning that the trace will have to stop at the end of this second
"transaction". This means, for example, that the second PERF_RECORD_AUX in
every trace comes with TRUNCATED flag set.
Setting attr.aux_watermark to quarter of the buffer gives enough space for
the ->aux_tail update to be observed and prevents the data loss.
The obligatory before/after showcase:
> # perf_before record -e intel_pt//u -m,8 uname
> Linux
> [ perf record: Woken up 6 times to write data ]
> Warning:
> AUX data lost 4 times out of 10!
>
> [ perf record: Captured and wrote 0.099 MB perf.data ]
> # perf record -e intel_pt//u -m,8 uname
> Linux
> [ perf record: Woken up 4 times to write data ]
> [ perf record: Captured and wrote 0.039 MB perf.data ]
The effect is still visible with large workloads and large buffers,
although less pronounced.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210414154955.49603-3-alexander.shishkin@linux.intel.com
In some versions of alpine Linux the perf build is broken since commit
1d509f2a6e ("x86/insn: Support big endian cross-compiles"):
In file included from /usr/include/linux/byteorder/little_endian.h:13,
from /usr/include/asm/byteorder.h:5,
from arch/x86/util/../../../../arch/x86/include/asm/insn.h:10,
from arch/x86/util/archinsn.c:2:
/usr/include/linux/swab.h:161:8: error: unknown type name '__always_inline'
static __always_inline __u16 __swab16p(const __u16 *p)
So move the inclusion of arch/x86/include/asm/insn.h to later in the
places where linux/stddef.h (that conditionally defines
__always_inline) to workaround this problem on Alpine Linux 3.9 to 3.11,
3.12 onwards works.
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For X86, the var2_w field of PERF_SAMPLE_WEIGHT_STRUCT stands for the
instruction latency. Current perf forces the var2_w to the data->ins_lat
in the generic code. It works well for now because X86 is the only
architecture that supports the PERF_SAMPLE_WEIGHT_STRUCT, but it may
bring problems once other architectures support the sample type. For
example, the var2_w may be used to capture something else on PowerPC.
Create two architecture specific functions to parse and synthesize the
weight related samples. Move the X86 specific codes to the X86 version
functions. Other architectures can implement their own functions later
separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/1612540912-6562-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new sample type, PERF_SAMPLE_WEIGHT_STRUCT, is an alternative of the
PERF_SAMPLE_WEIGHT sample type. Users can apply either the
PERF_SAMPLE_WEIGHT sample type or the PERF_SAMPLE_WEIGHT_STRUCT sample
type to retrieve the sample weight, but they cannot apply both sample
types simultaneously.
The new sample type shares the same space as the PERF_SAMPLE_WEIGHT
sample type. The lower 32 bits are exactly the same for both sample
type. The higher 32 bits may be different for different architecture.
Add arch specific arch_evsel__set_sample_weight() to set the new sample
type for X86. Only store the lower 32 bits for the sample->weight if the
new sample type is applied. In practice, no memory access could last
than 4G cycles. No data will be lost.
If the kernel doesn't support the new sample type. Fall back to the
PERF_SAMPLE_WEIGHT sample type.
There is no impact for other architectures.
Committer notes:
Fixup related to PERF_SAMPLE_CODE_PAGE_SIZE, present in acme/perf/core
but not upstream yet.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/1612296553-21962-6-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On the Intel Sapphire Rapids server, an auxiliary event has to be
enabled simultaneously with the load latency event to retrieve complete
Memory Info.
Add X86 specific perf_mem_events__name() to handle the auxiliary event.
- Users are only interested in the samples of the mem-loads event.
Sample read the auxiliary event.
- The auxiliary event must be in front of the load latency event in a
group. Assume the second event to sample if the auxiliary event is the
leader.
- Add a weak is_mem_loads_aux_event() to check the auxiliary event for
X86. For other ARCHs, it always return false.
Parse the unique event name, mem-loads-aux, for the auxiliary event.
Committer notes:
According to 61b985e3e7 ("perf/x86/intel: Add perf core PMU
support for Sapphire Rapids"), ENODATA is only returned by
sys_perf_event_open() when used with these auxiliary events, with this
in evsel__open_strerror():
case ENODATA:
return scnprintf(msg, size, "Cannot collect data source with the load latency event alone. "
"Please add an auxiliary event in front of the load latency event.");
This is Ok at this point in time, but fragile long term, I pointed this
out in the e-mail thread, requesting a follow up patch to check if
ENODATA is really for this specific case.
Fixed up sizeof(MEM_LOADS_AUX_NAME) bug pointed out by Namhyung.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210205152648.GC920417@kernel.org
Link: http://lore.kernel.org/lkml/1612296553-21962-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Topdown Microarchitecture Analysis (TMA) Method is a structured
analysis methodology to identify critical performance bottlenecks in
out-of-order processors. From the Ice Lake and later platforms, the
Topdown information can be retrieved from the dedicated "metrics"
register, which isn't impacted by other events. Also, the Topdown
metrics support both per thread/process and per core measuring. Adding
Topdown metrics events as default events can enrich the default
measuring information, and would not cost any extra multiplexing.
Introduce arch_evlist__add_default_attrs() to allow architecture
specific default events. Add the Topdown metrics events in the X86
specific arch_evlist__add_default_attrs(). Other architectures can add
their own default events later separately.
With the patch:
$ perf stat sleep 1
Performance counter stats for 'sleep 1':
0.82 msec task-clock:u # 0.001 CPUs utilized
0 context-switches:u # 0.000 K/sec
0 cpu-migrations:u # 0.000 K/sec
61 page-faults:u # 0.074 M/sec
319,941 cycles:u # 0.388 GHz
242,802 instructions:u # 0.76 insn per cycle
54,380 branches:u # 66.028 M/sec
4,043 branch-misses:u # 7.43% of all branches
1,585,555 slots:u # 1925.189 M/sec
238,941 topdown-retiring:u # 15.0% retiring
410,378 topdown-bad-spec:u # 25.8% bad speculation
634,222 topdown-fe-bound:u # 39.9% frontend bound
304,675 topdown-be-bound:u # 19.2% backend bound
1.001791625 seconds time elapsed
0.000000000 seconds user
0.001572000 seconds sys
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210121133752.118327-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/,
go on completing this split.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Functions perf_read_tsc_conversion() and perf_event__synth_time_conv()
should work as common functions rather than x86 specific, so move these
two functions out from arch/x86 folder and place them into util/tsc.c.
Since the function perf_event__synth_time_conv() will be linked in
util/tsc.c, remove its weak version.
Committer testing:
Before/after:
# perf test tsc
70: Convert perf time to TSC : Ok
#
# perf test -v tsc
70: Convert perf time to TSC :
--- start ---
test child forked, pid 8520
mmap size 528384B
1st event perf time 592110439891 tsc 2317172044331
rdtsc time 592110441915 tsc 2317172052010
2nd event perf time 592110442336 tsc 2317172053605
test child finished with 0
---- end ----
Convert perf time to TSC: Ok
#
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kemeng Shi <shikemeng@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Gasson <nick.gasson@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steve Maclean <steve.maclean@microsoft.com>
Cc: Will Deacon <will@kernel.org>
Cc: Zou Wei <zou_wei@huawei.com>
Link: http://lore.kernel.org/lkml/20200914115311.2201-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the hardware TopDown metrics feature, sample-read feature should be
supported for a topdown group, e.g., sample a non-topdown event and read
a topdown metric group. But the current perf record code errors out.
For a topdown metric group, the slots event must be the leader of the
group, but the leader slots event doesn't support sampling.
To support sample-read the topdown metric group, use the 2nd event of
the group as the "leader" for the purposes of sampling.
Only the platform with Topdown metic feature supports sample-read the
topdown group. Add arch_topdown_sample_read() to indicate whether the
topdown group supports sample-read.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200911144808.27603-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The group.h/c only include TopDown group related functions. The name
"group" is too generic and inaccurate. Use the name "topdown" to replace
it.
Move topdown related functions to a dedicated file, topdown.c.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200911144808.27603-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Select text poke events when available and the kernel is being traced.
Process text poke events to invalidate entries in Intel PT's instruction
cache.
Example:
The example requires kernel config:
CONFIG_PROC_SYSCTL=y
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
Before:
# perf record -o perf.data.before --kcore -a -e intel_pt//k -m,64M &
# cat /proc/sys/kernel/sched_schedstats
0
# echo 1 > /proc/sys/kernel/sched_schedstats
# cat /proc/sys/kernel/sched_schedstats
1
# echo 0 > /proc/sys/kernel/sched_schedstats
# cat /proc/sys/kernel/sched_schedstats
0
# kill %1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 3.341 MB perf.data.before ]
[1]+ Terminated perf record -o perf.data.before --kcore -a -e intel_pt//k -m,64M
# perf script -i perf.data.before --itrace=e >/dev/null
Warning:
474 instruction trace errors
After:
# perf record -o perf.data.after --kcore -a -e intel_pt//k -m,64M &
# cat /proc/sys/kernel/sched_schedstats
0
# echo 1 > /proc/sys/kernel/sched_schedstats
# cat /proc/sys/kernel/sched_schedstats
1
# echo 0 > /proc/sys/kernel/sched_schedstats
# cat /proc/sys/kernel/sched_schedstats
0
# kill %1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.646 MB perf.data.after ]
[1]+ Terminated perf record -o perf.data.after --kcore -a -e intel_pt//k -m,64M
# perf script -i perf.data.after --itrace=e >/dev/null
Example:
The example requires kernel config:
# CONFIG_FUNCTION_TRACER is not set
Before:
# perf record --kcore -m,64M -o t1 -a -e intel_pt//k &
# perf probe __schedule
Added new event:
probe:__schedule (on __schedule)
You can now use it in all perf tools, such as:
perf record -e probe:__schedule -aR sleep 1
# perf record -e probe:__schedule -aR sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.026 MB perf.data (68 samples) ]
# perf probe -d probe:__schedule
Removed event: probe:__schedule
# kill %1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 41.268 MB t1 ]
[1]+ Terminated perf record --kcore -m,64M -o t1 -a -e intel_pt//k
# perf script -i t1 --itrace=e >/dev/null
Warning:
207 instruction trace errors
After:
# perf record --kcore -m,64M -o t1 -a -e intel_pt//k &
# perf probe __schedule
Added new event:
probe:__schedule (on __schedule)
You can now use it in all perf tools, such as:
perf record -e probe:__schedule -aR sleep 1
# perf record -e probe:__schedule -aR sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.028 MB perf.data (107 samples) ]
# perf probe -d probe:__schedule
Removed event: probe:__schedule
# kill %1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 39.978 MB t1 ]
[1]+ Terminated perf record --kcore -m,64M -o t1 -a -e intel_pt//k
# perf script -i t1 --itrace=e >/dev/null
# perf script -i t1 --no-itrace -D | grep 'POKE\|KSYMBOL'
6 565303693547 0x291f18 [0x50]: PERF_RECORD_KSYMBOL addr ffffffffc027a000 len 4096 type 2 flags 0x0 name kprobe_insn_page
6 565303697010 0x291f68 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffc027a000 old len 0 new len 6
6 565303838278 0x291fa8 [0x50]: PERF_RECORD_KSYMBOL addr ffffffffc027c000 len 4096 type 2 flags 0x0 name kprobe_optinsn_page
6 565303848286 0x291ff8 [0xa0]: PERF_RECORD_TEXT_POKE addr 0xffffffffc027c000 old len 0 new len 106
6 565369336743 0x292af8 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffff88ab8890 old len 5 new len 5
7 566434327704 0x217c208 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffff88ab8890 old len 5 new len 5
6 566456313475 0x293198 [0xa0]: PERF_RECORD_TEXT_POKE addr 0xffffffffc027c000 old len 106 new len 0
6 566456314935 0x293238 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffc027a000 old len 6 new len 0
Example:
The example requires kernel config:
CONFIG_FUNCTION_TRACER=y
Before:
# perf record --kcore -m,64M -o t1 -a -e intel_pt//k &
# perf probe __kmalloc
Added new event:
probe:__kmalloc (on __kmalloc)
You can now use it in all perf tools, such as:
perf record -e probe:__kmalloc -aR sleep 1
# perf record -e probe:__kmalloc -aR sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.022 MB perf.data (6 samples) ]
# perf probe -d probe:__kmalloc
Removed event: probe:__kmalloc
# kill %1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 43.850 MB t1 ]
[1]+ Terminated perf record --kcore -m,64M -o t1 -a -e intel_pt//k
# perf script -i t1 --itrace=e >/dev/null
Warning:
8 instruction trace errors
After:
# perf record --kcore -m,64M -o t1 -a -e intel_pt//k &
# perf probe __kmalloc
Added new event:
probe:__kmalloc (on __kmalloc)
You can now use it in all perf tools, such as:
perf record -e probe:__kmalloc -aR sleep 1
# perf record -e probe:__kmalloc -aR sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.037 MB perf.data (206 samples) ]
# perf probe -d probe:__kmalloc
Removed event: probe:__kmalloc
# kill %1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 41.442 MB t1 ]
[1]+ Terminated perf record --kcore -m,64M -o t1 -a -e intel_pt//k
# perf script -i t1 --itrace=e >/dev/null
# perf script -i t1 --no-itrace -D | grep 'POKE\|KSYMBOL'
5 312216133258 0x8bafe0 [0x50]: PERF_RECORD_KSYMBOL addr ffffffffc0360000 len 415 type 2 flags 0x0 name ftrace_trampoline
5 312216133494 0x8bb030 [0x1d8]: PERF_RECORD_TEXT_POKE addr 0xffffffffc0360000 old len 0 new len 415
5 312216229563 0x8bb208 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac6016f5 old len 5 new len 5
5 312216239063 0x8bb248 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac601803 old len 5 new len 5
5 312216727230 0x8bb288 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffabbea190 old len 5 new len 5
5 312216739322 0x8bb2c8 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac6016f5 old len 5 new len 5
5 312216748321 0x8bb308 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac601803 old len 5 new len 5
7 313287163462 0x2817430 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac6016f5 old len 5 new len 5
7 313287174890 0x2817470 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac601803 old len 5 new len 5
7 313287818979 0x28174b0 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffabbea190 old len 5 new len 5
7 313287829357 0x28174f0 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac6016f5 old len 5 new len 5
7 313287841246 0x2817530 [0x40]: PERF_RECORD_TEXT_POKE addr 0xffffffffac601803 old len 5 new len 5
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20200512121922.8997-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When recording PEBS-via-PT, the kernel will not accept the intel_pt
event with register sampling e.g.
# perf record --kcore -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l
Error:
intel_pt/branch=0/: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'
Fix by suppressing register sampling on the intel_pt evsel.
Committer notes:
Adrian informed that this is only available from Tremont onwards, so on
older processors the error continues the same as before.
Fixes: 9e64cefe43 ("perf intel-pt: Process options for PEBS event synthesis")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Luwei Kang <luwei.kang@intel.com>
Link: http://lore.kernel.org/lkml/20200630133935.11150-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is currently working due to extra include paths in the build.
Before:
$ cd tools/perf/arch/arm64/util
$ ls -la ../../util/unwind-libdw.h
ls: cannot access '../../util/unwind-libdw.h': No such file or directory
After:
$ ls -la ../../../util/unwind-libdw.h
-rw-r----- 1 irogers irogers 553 Apr 17 14:31 ../../../util/unwind-libdw.h
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200529225232.207532-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stop the message displaying when user space is not being traced.
Example:
Prerequisites:
sudo setcap "cap_sys_rawio,cap_sys_admin,cap_sys_ptrace,cap_syslog,cap_ipc_lock=ep" ~/bin/perf
sudo chmod +r /proc/kcore
Before:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
Warning:
Intel Processor Trace decoding will not be possible except for kernel tracing!
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.838 MB perf.data ]
After:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.068 MB perf.data ]
$ sudo chmod go-r /proc/kcore
$ sudo setcap -r ~/bin/perf
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lore.kernel.org/lkml/20200528120859.21604-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Context switch events are added automatically by Intel PT and Coresight.
Make it possible to suppress them. That is useful for tracing the
scheduler without the disturbance that the switch event processing
creates.
Example:
Prerequisites:
$ which perf
~/bin/perf
$ sudo setcap "cap_sys_rawio,cap_sys_admin,cap_sys_ptrace,cap_syslog,cap_ipc_lock=ep" ~/bin/perf
$ sudo chmod +r /proc/kcore
Before:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.938 MB perf.data ]
$ perf script -D | grep PERF_RECORD_SWITCH | wc -l
572
After:
$ perf record --no-switch-events --kcore -a -e intel_pt//k -- sleep 0.001
Warning:
Intel Processor Trace decoding will not be possible except for kernel tracing!
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.838 MB perf.data ]
$ perf script -D | grep PERF_RECORD_SWITCH | wc -l
0
$ sudo chmod go-r /proc/kcore
$ sudo setcap -r ~/bin/perf
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lore.kernel.org/lkml/20200528120859.21604-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On a CPU like skylakex an uncore_iio_0 PMU may alias with
uncore_iio_free_running_0. The latter PMU doesn't support fc_mask as a
parameter and so pmu_config_term fails. Typically parse_events_add_pmu
is called in a loop where if one alias succeeds errors are ignored,
however, if multiple errors occur parse_events__handle_error will
currently give a WARN_ONCE.
This change removes the WARN_ONCE in parse_events__handle_error and
makes it a pr_debug. It adds verbose messages to parse_events_add_pmu
warning that non-fatal errors may occur, while giving details on the pmu
and config terms for useful context. pmu_config_term is altered so the
failing term and pmu are present in the case of the 'unknown term' error
which makes spotting the free_running case more straightforward.
Before:
$ perf --debug verbose=3 stat -M llc_misses.pcie_read sleep 1
Using CPUID GenuineIntel-6-55-4
metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
found event unc_iio_data_req_of_cpu.mem_read.part0
found event unc_iio_data_req_of_cpu.mem_read.part1
found event unc_iio_data_req_of_cpu.mem_read.part2
found event unc_iio_data_req_of_cpu.mem_read.part3
metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
found event unc_iio_data_req_of_cpu.mem_read.part0
found event unc_iio_data_req_of_cpu.mem_read.part1
found event unc_iio_data_req_of_cpu.mem_read.part2
found event unc_iio_data_req_of_cpu.mem_read.part3
adding {unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W,{unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
WARNING: multiple event parsing errors
...
Invalid event/parameter 'fc_mask'
...
After:
$ perf --debug verbose=3 stat -M llc_misses.pcie_read sleep 1
Using CPUID GenuineIntel-6-55-4
metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
found event unc_iio_data_req_of_cpu.mem_read.part0
found event unc_iio_data_req_of_cpu.mem_read.part1
found event unc_iio_data_req_of_cpu.mem_read.part2
found event unc_iio_data_req_of_cpu.mem_read.part3
metric expr unc_iio_data_req_of_cpu.mem_read.part0 + unc_iio_data_req_of_cpu.mem_read.part1 + unc_iio_data_req_of_cpu.mem_read.part2 + unc_iio_data_req_of_cpu.mem_read.part3 for LLC_MISSES.PCIE_READ
found event unc_iio_data_req_of_cpu.mem_read.part0
found event unc_iio_data_req_of_cpu.mem_read.part1
found event unc_iio_data_req_of_cpu.mem_read.part2
found event unc_iio_data_req_of_cpu.mem_read.part3
adding {unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W,{unc_iio_data_req_of_cpu.mem_read.part0,unc_iio_data_req_of_cpu.mem_read.part1,unc_iio_data_req_of_cpu.mem_read.part2,unc_iio_data_req_of_cpu.mem_read.part3}:W
intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
Attempting to add event pmu 'uncore_iio_free_running_5' with 'unc_iio_data_req_of_cpu.mem_read.part0,' that may result in non-fatal errors
After aliases, add event pmu 'uncore_iio_free_running_5' with 'fc_mask,ch_mask,umask,event,' that may result in non-fatal errors
Attempting to add event pmu 'uncore_iio_free_running_3' with 'unc_iio_data_req_of_cpu.mem_read.part0,' that may result in non-fatal errors
After aliases, add event pmu 'uncore_iio_free_running_3' with 'fc_mask,ch_mask,umask,event,' that may result in non-fatal errors
Attempting to add event pmu 'uncore_iio_free_running_1' with 'unc_iio_data_req_of_cpu.mem_read.part0,' that may result in non-fatal errors
After aliases, add event pmu 'uncore_iio_free_running_1' with 'fc_mask,ch_mask,umask,event,' that may result in non-fatal errors
Multiple errors dropping message: unknown term 'fc_mask' for pmu 'uncore_iio_free_running_3' (valid terms: event,umask,config,config1,config2,name,period,percore)
...
So before you see a 'WARNING: multiple event parsing errors' and
'Invalid event/parameter'. After you see 'Attempting... that may result
in non-fatal errors' then 'Multiple errors...' with details that
'fc_mask' wasn't known to a free running counter. While not completely
clean, this makes it clearer that an error hasn't really occurred.
v2. addresses review feedback from Jiri Olsa <jolsa@redhat.com>.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200513220635.54700-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is a 'struct evsel' method, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As those are not 'struct evsel' methods, not part of tools/lib/perf/,
aka libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As they are not 'struct evsel' methods, not part of tools/lib/perf/, aka
libperf, to whom the perf_ prefix belongs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Trying to disentangle this a bit further, unfortunately it uses
parse_events(), its interesting to have it separated anyway, so do it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is currently working due to extra include paths in the build.
Committer testing:
$ cd tools/include/uapi/asm/
Before this patch:
$ ls -la ../../arch/x86/include/uapi/asm/errno.h
ls: cannot access '../../arch/x86/include/uapi/asm/errno.h': No such file or directory
$
After this patch;
$ ls -la ../../../arch/x86/include/uapi/asm/errno.h
-rw-rw-r--. 1 acme acme 31 Feb 20 12:42 ../../../arch/x86/include/uapi/asm/errno.h
$
Check that that is still under tools/, i.e. hasn't escaped into the main
kernel sources:
$ cd ../../../arch/x86/include/uapi/asm/
$ pwd
/home/acme/git/perf/tools/arch/x86/include/uapi/asm
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Li <liwei391@huawei.com>
Link: http://lore.kernel.org/lkml/20200306071110.130202-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All ->read_finish() implementations are doing the same thing. Add a
helper function so that they can share the same implementation.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Wei Li <liwei391@huawei.com>
Link: http://lore.kernel.org/lkml/20200217082300.6301-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be
endless.
If the intel_bts event is disabled, we don't enable it again here.
Note: This patch is NOT tested since i don't have such a machine with
intel_bts feature, but the code seems buggy same as arm-spe and
intel-pt.
Signed-off-by: Wei Li <liwei391@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-3-adrian.hunter@intel.com
[ahunter: removed redundant 'else' after 'return']
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In __cmd_record(), when receiving SIGINT(ctrl + c), a 'done' flag will
be set and the event list will be disabled by evlist__disable() once.
While in auxtrace_record.read_finish(), the related events will be
enabled again, if they are continuous, the recording seems to be endless.
If the intel_pt event is disabled, we don't enable it again here.
Before the patch:
huawei@huawei-2288H-V5:~/linux-5.5-rc4/tools/perf$ ./perf record -e \
intel_pt//u -p 46803
^C^C^C^C^C^C
After the patch:
huawei@huawei-2288H-V5:~/linux-5.5-rc4/tools/perf$ ./perf record -e \
intel_pt//u -p 48591
^C[ perf record: Woken up 0 times to write data ]
Warning:
AUX data lost 504 times out of 4816!
[ perf record: Captured and wrote 2024.405 MB perf.data ]
Signed-off-by: Wei Li <liwei391@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: stable@vger.kernel.org # 5.4+
Link: http://lore.kernel.org/lkml/20200214132654.20395-2-adrian.hunter@intel.com
[ ahunter: removed redundant 'else' after 'return' ]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And pick the shortest name: 'struct maps'.
The split existed because we used to have two groups of maps, one for
functions and one for variables, but that only complicated things,
sometimes we needed to figure out what was at some address and then had
to first try it on the functions group and if that failed, fall back to
the variables one.
That split is long gone, so for quite a while we had only one struct
maps per struct map_groups, simplify things by combining those structs.
First patch is the minimum needed to merge both, follow up patches will
rename 'thread->mg' to 'thread->maps', etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-hom6639ro7020o708trhxh59@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an error message because Intel BTS does not support AUX area
sampling.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-16-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set up the default number of mmap pages, default sample size and default
psb_period for AUX area sampling. Add documentation also.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce boilerplate, provide a more compact form using an idiom
present in other trees of data structures.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-59gmq4kg1r68ou1wknyjl78x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For consistency, propagate the exact cause for get_cpuid() to have
failed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9ig269f7ktnhh99g4l15vpu2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Naresh Kamboju reported, that on the i386 build pr_err()
doesn't get defined properly due to header ordering:
perf-in.o: In function `libunwind__x86_reg_id':
tools/perf/util/libunwind/../../arch/x86/util/unwind-libunwind.c:109:
undefined reference to `pr_err'
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We need the 'page_size' variable in libperf, so move it there.
Add a libperf_init() as a global libperf init function to obtain this
value via sysconf() at tool start.
Committer notes:
Add internal/lib.h to tools/perf/ files using 'page_size', sometimes
replacing util.h with it if that was the only reason for having util.h
included.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-33-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_evlist__first()/last() functions to libperf, as internal
functions and rename perf's origins to evlist__first/last.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-29-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'nr_mmaps' from 'struct evlist' to 'struct perf_evlist', it will
be used in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the 'system_wide 'member from perf's evsel to libperf's perf_evsel.
Committer notes:
Added stdbool.h as we now use bool here.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_mmap struct to libperf.
The definition is added into:
include/internal/mmap.h
which is not to be included by users, but shared within perf and
libperf.
Committer notes:
Remove unnecessary includes from tools/perf/lib/include/internal/mmap.h,
those will be readded as they become necessary, later in the series.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this isn't used at all in mmap.h but in evlist.h, so to cut down the
header dependency tree, move it to where it is used.
Also add mmap.h to the places using it but previously getting it
indirectly via evlist.h.
Add missing pthread.h to evlist.h, as it has a pthread_t struct member
and was getting the header via mmap.h.
Noticed while processing a Jiri's libperf batch touching mmap.h, where
almost everything gets rebuilt because evlist.h is so popular, so cut
down't this rebuild the world party.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lkml.kernel.org/n/tip-he0uljeftl0xfveh3d6vtode@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are the only routines using the perf_event__handler_t typedef and
are all related, so move to a separate header to reduce the header
dependency tree, lots of places were getting event.h and even stdio.h,
limits.h indirectly, so fix those as well.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-yvx9u1mf7baq6cu1abfhbqgs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check that it is not needed and remove, fixing up some fallout for
places where it was only serving to get something else.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9h6dg6lsqe2usyqjh5rrues4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that there's a common version of the decoder for all tools, use it
instead of the local copy.
Also use perf's check-headers.sh script to diff the decoder files to
make sure they remain in sync with the kernel version. Objtool has a
similar check.
Committer notes:
Had to keep this all pointing explicitely to x86 headers/files, i.e.
instead of asm/isnn.h we had to use ../include/asm/insn.h when the files
were in differemt dirs, or just replace "<asm/foo.h>" with "foo.h".
This way we continue to be able to process perf.data files with Intel PT
traces in distros other than x86.
Also fixed up the awk script paths to use $(srcdir)/tools/arch instead
or relative directories so that we keep detached tarballs (make help |
grep perf) working.
For now the include lines in these headers are being ignored so as not
to flag false reports of kernel/tools out of sync.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/8a37e615d2880f039505d693d1e068a009358a2b.1567118001.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf.h and build-id.h are not needed at all in event.h, remove them.
And fixup the fallout of files that were getting needed stuff from this
now pruned include.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-rdm3dgtlrndmmnlc4bafsg3b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All we need there is a forward declaration for 'union perf_event', so
remove it from there and add missing header directives in places using
things from this indirect include.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7ftk0ztstqub1tirjj8o8xbl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the movement of lots of stuff out of perf.h to other headers we
ended up not needing it in lots of places, remove it from those places.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-c718m0sxxwp73lp9d8vpihb4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And remove unneeded include directives from perf-sys.h to prune the
header dependency tree.
Fixup the fallout in places where definitions were being used without
the needed include directives that were being satisfied because they
were in perf-sys.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7b1zvugiwak4ibfa3j6ott7f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Even more, to have a "perf_record_" prefix, so that they match the
PERF_RECORD_ enum they map to.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-23-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the PERF_RECORD_AUXTRACE_INFO event definition to libperf's
event.h.
In order to keep libperf simple, we switch 'u64/u32/u16/u8' types used
events to their generic '__u*' versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190828135717.7245-9-jolsa@kernel.org
[ Fix cs_etm__print_auxtrace_info() arg to be __u64 too to fix the CORESIGHT=1 build ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is no need for that util/util.h include there and, remove it,
pruning the include tree, fix the fallout by adding necessary headers to
places that were getting needed includes indirectly from evlist.h ->
util.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-s9f7uve8wvykr5itcm7m7d8q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel is using CAP_SYS_ADMIN instead of euid==0 to override
perf_event_paranoid check. Make perf do the same.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # coresight part
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1566869956-7154-3-git-send-email-ilubashe@akamai.com
Signed-off-by: Igor Lubashev <ilubashe@akamai.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And into a separate util/record.h, to better isolate things and make
sure that those who use record_opts and the other moved declarations
are explicitly including the necessary header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-31q8mei1qkh74qvkl9nwidfq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The util/cpumap.h file doesn't use anything in refcount.h not in
debug.h, it needs just a forward reference to 'struct cpu_map_data',
that is defined in util/event.h and cpumap.h was getting indirectly via,
of all things, debug.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mtjww98yptt4ppo6g2blavg5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It uses strcmp(), strstr() and was getting the required string.h header
by luck, from evsel.h -> cpumap.h -> debug.h -> string.h, add the
missing header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-qrz8hhvrhwnmt5ocfwk4br5d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So it's part of the libperf library as one of basic functions operating
on the perf_cpu_map class.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190822111141.25823-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Process synth_opts.other_events and attr.aux_output to set up for
synthesizing PEBs via Intel PT events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-6-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
[ Fixed up libbperf clashes, i.e. some places using perf_evsel (now in libperf)
need to use instead 'evsel' (a tools/perf only abstraction) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These paths point to the wrong location but still work because they get
picked up by a -I flag that happens to direct to the correct file. Fix
paths to lead to the actual file location without help from include
flags.
Signed-off-by: Luke Mujica <lukemujica@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190719202253.220261-1-lukemujica@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'.
Committer notes:
Fixed up these:
tools/perf/arch/arm/util/auxtrace.c
tools/perf/arch/arm/util/cs-etm.c
tools/perf/arch/arm64/util/arm-spe.c
tools/perf/arch/s390/util/auxtrace.c
tools/perf/util/cs-etm.c
Also
cc1: warnings being treated as errors
tests/sample-parsing.c: In function 'do_test':
tests/sample-parsing.c:162: error: missing initializer
tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus')
struct evsel evsel = {
.needs_swap = false,
- .core.attr = {
- .sample_type = sample_type,
- .read_format = read_format,
+ .core = {
+ . attr = {
+ .sample_type = sample_type,
+ .read_format = read_format,
+ },
[perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1
gcc (GCC) 4.4.7
Also we don't need to include perf_event.h in
tools/perf/lib/include/perf/evsel.h, forward declaring 'struct
perf_event_attr' is enough. And this even fixes the build in some
systems where things are used somewhere down the include path from
perf_event.h without defining __always_inline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Renaming perf_evsel__disable() to evsel__disable(), so we don't have a
name clash when we add perf_evsel__disable() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-17-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_evsel__enable() to evsel__enable(), so we don't have a name
clash when we add perf_evsel__enable() in libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evlist to struct evlist, so we don't have a name
clash when we add struct perf_evlist in libperf.
Committer notes:
Added fixes to build on arm64, from Jiri and from me
(tools/perf/util/cs-etm.c)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct cpu_map to struct perf_cpu_map, so it could be part of
libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eroding a bit more the tools/perf/util/util.h hodpodge header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got the sane_ctype.h headers from git and kept using it so far, but
since that code originally came from the kernel sources to the git
sources, perhaps its better to just use the one in the kernel, so that
we can leverage tools/perf/check_headers.sh to be notified when our copy
gets out of sync, i.e. when fixes or goodies are added to the code we've
copied.
This will help with things like tools/lib/string.c where we want to have
more things in common with the kernel, such as strim(), skip_spaces(),
etc so as to go on removing the things that we have in tools/perf/util/
and instead using the code in the kernel, indirectly and removing things
like EXPORT_SYMBOL(), etc, getting notified when fixes and improvements
are made to the original code.
Hopefully this also should help with reducing the difference of code
hosted in tools/ to the one in the kernel proper.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-7k9868l713wqtgo01xxygn12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not to depend of getting it indirectly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-tirjsmvu4ektw0k7lm8k9lhu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're getting it by sheer luck, add that util.h to get the 'page_size'
definition.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-347078mgj3d2jfygtxs4ntti@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the macro defined in kernel ABI header to replace the local name.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/1559081314-9714-5-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 263 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
XMM registers can be collected on Icelake and later platforms.
Add specific arch__intr_reg_mask(), which creating an event to check if
the kernel and hardware can collect XMM registers.
Test on Skylake which doesn't support XMM registers collection. There is
nothing changed.
#perf record -I?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9
R10 R11 R12 R13 R14 R15
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-I, --intr-regs[=<any register>]
sample selected machine registers on
interrupt, use '-I?' to list register names
#perf record -I
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.905 MB perf.data (2520 samples) ]
#perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|CPU|PERIOD|REGS_INTR, read_format: ID, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3,
sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol:
1, bpf_event: 1, sample_regs_intr: 0xff0fff
Test on Icelake which support XMM registers collection.
#perf record -I?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10
R11 R12 R13 R14 R15 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 XMM9
XMM10 XMM11 XMM12 XMM13 XMM14 XMM15
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-I, --intr-regs[=<any register>]
sample selected machine registers on
interrupt, use '-I?' to list register names
#perf record -I
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.800 MB perf.data (318 samples) ]
#perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type:
IP|TID|TIME|CPU|PERIOD|REGS_INTR, read_format: ID, disabled: 1,
inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3,
sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol:
1, bpf_event: 1, sample_regs_intr: 0xffffffff00ff0fff
Committer notes:
Don't set attr.sample_period as a named struct init, as it is part of an
unnamed union in 'struct perf_event_attr', and doing so breaks the build
on older gcc versions, such as:
gcc version 4.1.2 20080704 (Red Hat 4.1.2-55)
gcc version 4.4.7 20120313 (Red Hat 4.4.7-23) (GCC)
arch/x86/util/perf_regs.c: In function 'arch__intr_reg_mask':
arch/x86/util/perf_regs.c:279: error: unknown field 'sample_period' specified in initializer
cc1: warnings being treated as errors
arch/x86/util/perf_regs.c:279: warning: missing braces around initializer
arch/x86/util/perf_regs.c:279: warning: (near initialization for 'attr.<anonymous>')
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
[ Only on a lenovo t480s, a skylake machine, where the XMM registers didn't show up in -I?/--user-regs=? as expected ]
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1557865174-56264-3-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Icelake and later platforms support collecting XMM registers with PEBS
event.
Add support for 'perf script' to dump them, and support for the register
parser in 'perf record -I=' ... to configure them.
For now they are just printed in hex, we could potentially later add
other formats too.
Committer testing:
Before:
# perf record -IXMM0
Warning:
unknown register XMM0, check man page or run 'perf record -I?'
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
#
# perf record -I?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
#
After:
# perf record -IXMM0
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cycles).
/bin/dmesg | grep -i perf may provide additional information.
#
# perf record -I?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 XMM9 XMM10 XMM11 XMM12 XMM13 XMM14 XMM15
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-I, --intr-regs[=<any register>]
sample selected machine registers on interrupt, use -I ? to list register names
#
More work is needed to, when faced with such error, warn the user that
that register is not available on the running platform.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190506141926.13659-1-kan.liang@linux.intel.com
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename build libperf to perf, because it's used to build perf.
The libperf build object name will be used for libperf library.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190213123246.4015-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the include header dependency tree and speed up perf builds.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dngwaxuhfnhksawgdpo6e74n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Users should never use 'pt=0', but if they do it may give a meaningless
error:
$ perf record -e intel_pt/pt=0/u uname
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for
event (intel_pt/pt=0/u).
Fix that by forcing 'pt=1'.
Committer testing:
# perf record -e intel_pt/pt=0/u uname
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (intel_pt/pt=0/u).
/bin/dmesg | grep -i perf may provide additional information.
# perf record -e intel_pt/pt=0/u uname
pt=0 doesn't make sense, forcing pt=1
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data ]
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/b7c5b4e5-9497-10e5-fd43-5f3e4a0fe51d@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf tools cannot find the proper event list for the Cascadelake
server. Because the Cascadelake server and the Skylake server have the
same CPU model number, which are used by the perf tools to find the
event list.
The stepping for Skylake server is up to 4.
The stepping for Cascadelake server starts from 5.
The stepping can be used to distinguish between them.
The stepping is added in get_cpuid_str().
The stepping information for Skylake server is updated in mapfile.csv.
A x86 specific strcmp_cpuid_cmp() function is added to handle two CPUID
formats in mapfile.csv, "vendor-family-model-stepping" and
"vendor-family-model":
- If a cpuid-regular-expression from the mapfile.csv using the new
stepping format, a cpuid-string generated on the machine must include
stepping. Otherwise, it is a mismatch.
- If the cpuid-regular-expression using the old non-stepping format,
the stepping in the cpuid-string will be ignored.
The script, using environment string "PERF_CPUID" without stepping on
Skylake server, will be broken. If so, users must fix their scripts.
Committer notes:
Fixed this build error on centos:6 and debian:7:
arch/x86/util/header.c: In function 'is_full_cpuid':
arch/x86/util/header.c:82:39: error: declaration of 'cpuid' shadows a global declaration [-Werror=shadow]
arch/x86/util/header.c:12:1: error: shadowed declaration is here [-Werror=shadow]
arch/x86/util/header.c: In function 'strcmp_cpuid_str':
arch/x86/util/header.c:98:56: error: declaration of 'cpuid' shadows a global declaration [-Werror=shadow]
arch/x86/util/header.c:12:1: error: shadowed declaration is here [-Werror=shadow]
cc1: all warnings being treated as errors
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181114212416.15665-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tool perf is useful for the performance analysis on the Hygon Dhyana
platform. But right now there is no Hygon support for it to analyze the
KVM guest os data. So add Hygon Dhyana support to it by checking vendor
string to share the code path of AMD.
Signed-off-by: Pu Wen <puwen@hygon.cn>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1542008451-31735-1-git-send-email-puwen@hygon.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The UAPI file byteorder/little_endian.h uses the __always_inline define
without including the header where it is defined, linux/stddef.h, this
ends up working in all the other distros because that file gets included
seemingly by luck from one of the files included from little_endian.h.
But not on Alpine:edge, that fails for all files where perf_event.h is
included but linux/stddef.h isn't include before that.
Adding the missing linux/stddef.h file where it breaks on Alpine:edge to
fix that, in all other distros, that is just a very small header anyway.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-9r1pifftxvuxms8l7ir73p5l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are getting following warnings on gcc8 that break compilation:
$ make
CC jvmti/jvmti_agent.o
jvmti/jvmti_agent.c: In function ‘jvmti_open’:
jvmti/jvmti_agent.c:252:35: error: ‘/jit-’ directive output may be truncated \
writing 5 bytes into a region of size between 1 and 4096 [-Werror=format-truncation=]
snprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid());
There's no point in checking the result of snprintf call in
jvmti_open, the following open call will fail in case the
name is mangled or too long.
Using tools/lib/ function scnprintf that touches the return value from
the snprintf() calls and thus get rid of those warnings.
$ make DEBUG=1
CC arch/x86/util/perf_regs.o
arch/x86/util/perf_regs.c: In function ‘arch_sdt_arg_parse_op’:
arch/x86/util/perf_regs.c:229:4: error: ‘strncpy’ output truncated before terminating nul
copying 2 bytes from a string of the same length [-Werror=stringop-truncation]
strncpy(prefix, "+0", 2);
^~~~~~~~~~~~~~~~~~~~~~~~
Using scnprintf instead of the strncpy (which we know is safe in here)
to get rid of that warning.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180702134202.17745-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like the kernel text, the location of x86 PTI entry trampolines must be
recorded in the perf.data file. Like the kernel, synthesize a mmap event
for that, and add processing for it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create maps for x86 PTI entry trampolines, based on symbols found in
kallsyms. It is also necessary to keep track of whether the trampolines
have been mapped particularly when the kernel dso is kcore.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-9-git-send-email-adrian.hunter@intel.com
[ Fix extra_kernel_map_info.cnt designed struct initializer on gcc 4.4.7 (centos:6, etc) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In x86 architecture dependend part function get_cpuid_str() mallocs a
128 byte buffer, but does not check if the memory allocation succeeded
or not.
When the memory allocation fails, function __get_cpuid() is called with
first parameter being a NULL pointer. However this function references
its first parameter and operates on a NULL pointer which might cause
core dumps.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180117131611.34319-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a compile error:
...
CC util/libunwind/x86_32.o
In file included from util/libunwind/x86_32.c:33:0:
util/libunwind/../../arch/x86/util/unwind-libunwind.c: In function 'libunwind__x86_reg_id':
util/libunwind/../../arch/x86/util/unwind-libunwind.c:110:11: error: 'EINVAL' undeclared (first use in this function)
return -EINVAL;
^
util/libunwind/../../arch/x86/util/unwind-libunwind.c:110:11: note: each undeclared identifier is reported only once for each function it appears in
mv: cannot stat 'util/libunwind/.x86_32.o.tmp': No such file or directory
make[4]: *** [util/libunwind/x86_32.o] Error 1
make[3]: *** [util] Error 2
make[2]: *** [libperf-in.o] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2
It happens when libunwind-x86 feature is detected.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20171206015040.114574-1-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cpuid string will not be same on all CPUs on heterogeneous platforms
like ARM's big.LITTLE, adding provision(using pmu->cpus) to find cpuid
string from associated CPUs of PMU CORE device.
Also optimise arguments to function pmu_add_cpu_aliases.
Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jayachandran C <jnair@caviumnetworks.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@cavium.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: http://lkml.kernel.org/r/20171016183222.25750-2-ganapatrao.kulkarni@cavium.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An earlier kernel patch allowed enabling PT and LBR at the same time on
Goldmont.
commit ccbebba4c6 ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity
if the core supports it")
However, users still cannot use Intel PT and LBRs simultaneously. $
sudo perf record -e cycles,intel_pt//u -b -- sleep 1 Error: PMU
Hardware doesn't support sampling/overflow-interrupts.
PT implicitly adds dummy event in perf tool. dummy event is software
event which doesn't support LBR.
Always setting no branch for dummy event in Intel PT.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170630141656.1626-2-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The reason of introducing the tracking event (a dummy software event) is
to collect side-band information. Additional sampling is wasteful.
no_aux_samples should be set for tracking event.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170630141656.1626-1-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Branch tracing is enabled by default, so a fake config bit called 'pt'
(pass-through) was added to allow the 'branch enable' bit to have affect.
Add default config 'pt,branch' which will allow users to disable branch
tracing using 'branch=0' instead of having to specify 'pt,branch=0'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These defines were probably dragged in from sampling support in earlier
patches. They can be put back when needed.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170616112339.3fb6986e4ff33e353008244b@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SDT marker argument is in N@OP format. N is the size of argument and OP
is the actual assembly operand. OP is arch dependent component and hence
it's parsing logic also should be placed under tools/perf/arch/.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170328094754.3156-3-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I found couple of events using al, bl, cl and dl registers for argument.
These are not directly accepted by uprobe_events and thus needs to be
mapped to ax, bx, cx and dx respectively.
Few ex,
/usr/bin/qemu-system-s390x
css_adapter_interrupt: 1@%bl
css_chpid_add: 1@%cl 1@%sil 1@%dl
dma_bdrv_io: 8@%rbx 8@%rbp -8@%r14 1@%al
/usr/bin/postgres
buffer__read__done: ... -1@-bash -1@%al
buffer__read__start: ... -1@%al
I don't find any sdt events using ah, bh,... registers. But I also don't
see any reason to not use them, so there might be rare events using
these registers, and if so, perf should have a renaming logic for them
too.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170328094754.3156-2-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An sdt probe can be associated with arguments but they were not passed
to the user probe tracing interface (uprobe_events); this patch adapts
the sdt argument descriptors according to the uprobe input format.
As the uprobe parser does not support scaled address mode, perf will
skip arguments which cannot be adapted to the uprobe format.
Here are the results:
$ perf buildid-cache -v --add test_sdt
$ perf probe -x test_sdt sdt_libfoo:table_frob
$ perf probe -x test_sdt sdt_libfoo:table_diddle
$ perf record -e sdt_libfoo:table_frob -e sdt_libfoo:table_diddle test_sdt
$ perf script
test_sdt ... 666.255678: sdt_libfoo:table_frob: (4004d7) arg0=0 arg1=0
test_sdt ... 666.255683: sdt_libfoo:table_diddle: (40051a) arg0=0 arg1=0
test_sdt ... 666.255686: sdt_libfoo:table_frob: (4004d7) arg0=1 arg1=2
test_sdt ... 666.255689: sdt_libfoo:table_diddle: (40051a) arg0=3 arg1=4
test_sdt ... 666.255692: sdt_libfoo:table_frob: (4004d7) arg0=2 arg1=4
test_sdt ... 666.255694: sdt_libfoo:table_diddle: (40051a) arg0=6 arg1=8
Signed-off-by: Alexis Berlemont <alexis.berlemont@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20161214000732.1710-3-alexis.berlemont@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Implement the code to match CPU types to mapfile types for x86 based on
CPUID. This extends an existing similar function, but changes it to use
the x86 mapfile cpu description. This allows to resolve event lists
generated by jevents.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-6-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The address filter is needed to help decode the trace, so store it in
the AUXTRACE_INFO event.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously the maximum non-turbo ratio was calculated from TSC assuming
a 100 MHz multiplier which is correct for current hardware supporting
Intel PT. However more recent kernels also now export the value, so use
that in preference to the calculated value.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to successfully decode Intel PT traces, context switch events
are needed from the moment the trace starts. Currently that is ensured
by using the 'immediate' flag which enables the switch event when it is
opened.
However, since commit 86c2786994 ("perf intel-pt: Add support for
PERF_RECORD_SWITCH") that might not always happen. When tracing
system-wide the context switch event is added to the tracking event
which was not set as 'immediate'. Change that so it is.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 86c2786994 ("perf intel-pt: Add support for PERF_RECORD_SWITCH")
Link: http://lkml.kernel.org/r/1471245784-22580-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match the semantics for list.h in the kernel, that are used to
implement those macros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qbcjlgj0ffxquxscahbpddi3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CONFIG_LIBUNWIND/NO_LIBUNWIND are changed to CONFIG_LOCAL_LIBUNWIND/
NO_LOCAL_LIBUNWIND for retaining local unwind features. The new
CONFIG_LIBUNWIND stands for either local or remote or both unwind are
supported, and NO_LIBUNWIND means that neither local nor remote unwind
is supported.
LIBUNWIND_LIBS is eliminated in LDFLAGS if local libunwind is not
supported.
Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1464924803-22214-7-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add basic plumbing for TopDown in perf stat
TopDown is intended to replace the frontend cycles idle/ backend cycles
idle metrics in standard perf stat output. These metrics are not
reliable in many workloads, due to out of order effects.
This implements a new --topdown mode in perf stat (similar to
--transaction) that measures the pipe line bottlenecks using
standardized formulas. The measurement can be all done with 5 counters
(one fixed counter)
The result are four metrics:
FrontendBound, BackendBound, BadSpeculation, Retiring
that describe the CPU pipeline behavior on a high level.
The full top down methology has many hierarchical metrics. This
implementation only supports level 1 which can be collected without
multiplexing. A full implementation of top down on top of perf is
available in pmu-tools toplev. (http://github.com/andikleen/pmu-tools)
The current version works on Intel Core CPUs starting with Sandy Bridge,
and Atom CPUs starting with Silvermont. In principle the generic
metrics should be also implementable on other out of order CPUs.
TopDown level 1 uses a set of abstracted metrics which are generic to
out of order CPU cores (although some CPUs may not implement all of
them):
topdown-total-slots Available slots in the pipeline
topdown-slots-issued Slots issued into the pipeline
topdown-slots-retired Slots successfully retired
topdown-fetch-bubbles Pipeline gaps in the frontend
topdown-recovery-bubbles Pipeline gaps during recovery
from misspeculation
These metrics then allow to compute four useful metrics:
FrontendBound, BackendBound, Retiring, BadSpeculation.
Add a new --topdown options to enable events. When --topdown is
specified set up events for all topdown events supported by the kernel.
Add topdown-* as a special case to the event parser, as is needed for
all events containing -.
The actual code to compute the metrics is in follow-on patches.
v2: Use standard sysctl read function.
v3: Move x86 specific code to arch/
v4: Enable --metric-only implicitly for topdown.
v5: Add --single-thread option to not force per core mode
v6: Fix output order of topdown metrics
v7: Allow combining with -d
v8: Remove --single-thread again
v9: Rename functions, adding arch_ and topdown_.
v10: Expand man page and describe TopDown better
Paste intro into commit description.
Print error when malloc fails.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1464119559-17203-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is possible that all events in an evlist are overwritable.
perf_event__synth_time_conv() should not crash in this case.
record__pick_pc() is used to check avaliability.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464056944-166978-3-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To fix the build on Fedora Rawhide (gcc 6.0.0 20160311 (Red Hat 6.0.0-0.17):
CC /tmp/build/perf/arch/x86/util/dwarf-regs.o
arch/x86/util/dwarf-regs.c:66:36: error: 'x86_32_regoffset_table' defined but not used [-Werror=unused-const-variable=]
static const struct pt_regs_offset x86_32_regoffset_table[] = {
^~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fghuksc1u8ln82bof4lwcj0o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For Intel PT / BTS, define the environment variable that selects TSC
timestamps in the jitdump file.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1457426333-30260-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT uses TSC as a timestamp, so add support for using TSC instead
of the monotonic clock. Use of TSC is selected by an environment
variable "JITDUMP_USE_ARCH_TIMESTAMP" and flagged in the jitdump file
with flag JITDUMP_FLAGS_ARCH_TIMESTAMP.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457426330-30226-1-git-send-email-adrian.hunter@intel.com
[ Added the fixup from He Kuang to make it build on other arches, ]
[ such as aarch64, to avoid inserting this bisectiong breakage upstream ]
Link: http://lkml.kernel.org/r/1459482572-129494-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Intel PT uses the time members from the perf_event_mmap_page to convert
between TSC and perf time.
Due to a lack of foresight when Intel PT was implemented, those time
members were recorded in the (implementation dependent) AUXTRACE_INFO
event, the structure of which is generally inaccessible outside of the
Intel PT decoder. However now the conversion between TSC and perf time
is needed when processing a jitdump file when Intel PT has been used for
tracing.
So add a user event to record the time members. 'perf record' will
synthesize the event if the information is available. And session
processing will put a copy of the event on the session so that tools
like 'perf inject' can easily access it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1457426324-30158-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To follow convention used in other tools/perf/ areas. Also remove the
need to check if it is NULL before calling the destructor, again, to
follow convention that goes back to free().
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-w6owu7rb8a46gvunlinxaqwx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch removes the "const" qualifier from kvm_events_tp declaration
to account for the fact that some architectures may need to update this
variable dynamically. For instance, powerpc will need to update this
variable dynamically depending on the machine type.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-2-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its better to remove the dependency on uapi/kvm_perf.h to allow dynamic
discovery of kvm events (if its needed). To do this, some extern
variables have been introduced with which we can keep the generic
functions generic.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Acked-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-1-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On some architecture the size of the private header may be dependent on
the number of tracers used in the session. As such adding a "struct
perf_evlist *" parameter, which should contain all the required
information.
Also adjusting the existing client of the interface to take the new
parameter into account.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Chunyan Zhang <zhang.chunyan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: Mike Leach <mike.leach@arm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabin@rab.in>
Cc: Tor Jeremiassen <tor@ti.com>
Link: http://lkml.kernel.org/r/1452807977-8069-22-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
