When the clang toolchain has stack protection enabled, the bpf
skeletons build fails with:
error: A call to built-in function '__stack_chk_fail' is not supported.
Since stack-protector makes no sense for the BPF bits, just unconditionally
disable it.
See also similar case at 878625e1c7
Signed-off-by: Federico Pellegrin <fede@evolware.org>
Link: https://lore.kernel.org/r/20250718041224.12389-1-fede@evolware.org
[ rearrange long lines ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When someone has a global shellcheckrc file, for example at
~/.config/shellcheckrc, with the directive 'shell=sh', building perf
will fail with many shellcheck errors like:
In tests/shell/base_probe/test_adding_kernel.sh line 294:
(( TEST_RESULT += $? ))
^---------------------^ SC3006 (warning): In POSIX sh, standalone ((..)) is undefined.
For more information:
https://www.shellcheck.net/wiki/SC3006 -- In POSIX sh, standalone ((..)) is...
make[5]: *** [tests/Build:91: tests/shell/base_probe/test_adding_kernel.sh.shellcheck_log] Error 1
Passing the '-s bash' option ensures that it runs correctly regardless
of a developers global configuration.
This patch adds '-s bash' and other options to the SHELLCHECK variable
in Makefile.perf and makes use of the variable consistently.
Signed-off-by: Collin Funk <collin.funk1@gmail.com>
Link: https://lore.kernel.org/r/63491dbc8439edf2e949d80e264b9d22332fea61.1751082075.git.collin.funk1@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Remove all occurrence of libcrypto in the build system.
Signed-off-by: Yuzhuo Jing <yuzhuo@google.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250625202311.23244-5-ebiggers@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This is an end-to-end test for the PERF_RECORD_BPF_METADATA support.
It adds a new "bpf_metadata_perf_version" variable to perf's BPF programs,
so that when they are loaded, there will be at least one BPF program with
some metadata to parse. The test invokes "perf record" in a way that loads
one of those BPF programs, and then sifts through the output to find its
BPF metadata.
Signed-off-by: Blake Jones <blakejones@google.com>
Link: https://lore.kernel.org/r/20250612194939.162730-6-blakejones@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
There was a copy-paste mistake in the installation commands.
Also, we need to install stderr-whitelist.txt file, which contains
allowed messages that are printed on stderr and should not cause test
fail.
Fixes: 097fe67df1 ("perf testsuite: Install perf-report tests in the 'make install-tests -C tools/perf' target")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250113182605.130719-6-vmolnaro@redhat.com
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When -s/--summary option is used, it doesn't need (augmented) arguments
of syscalls. Let's skip the augmentation and load another small BPF
program to collect the statistics in the kernel instead of copying the
data to the ring-buffer to calculate the stats in userspace. This will
be much more light-weight than the existing approach and remove any lost
events.
Let's add a new option --bpf-summary to control this behavior. I cannot
make it default because there's no way to get e_machine in the BPF which
is needed for detecting different ABIs like 32-bit compat mode.
No functional changes intended except for no more LOST events. :)
$ sudo ./perf trace -as --summary-mode=total --bpf-summary sleep 1
Summary of events:
total, 6194 events
syscall calls errors total min avg max stddev
(msec) (msec) (msec) (msec) (%)
--------------- -------- ------ -------- --------- --------- --------- ------
epoll_wait 561 0 4530.843 0.000 8.076 520.941 18.75%
futex 693 45 4317.231 0.000 6.230 500.077 21.98%
poll 300 0 1040.109 0.000 3.467 120.928 17.02%
clock_nanosleep 1 0 1000.172 1000.172 1000.172 1000.172 0.00%
ppoll 360 0 872.386 0.001 2.423 253.275 41.91%
epoll_pwait 14 0 384.349 0.001 27.453 380.002 98.79%
pselect6 14 0 108.130 7.198 7.724 8.206 0.85%
nanosleep 39 0 43.378 0.069 1.112 10.084 44.23%
...
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250326044001.3503432-1-namhyung@kernel.org
[ Added fixup sent from Namhyung in response to my report to make it also dependent on CONFIG_TRACE ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf record
-----------
* Introduce latency profiling using scheduler information. The latency
profiling is to show impacts on wall-time rather than cpu-time. By
tracking context switches, it can weight samples and find which part
of the code contributed more to the execution latency.
The value (period) of the sample is weighted by dividing it by the
number of parallel execution at the moment. The parallelism is
tracked in perf report with sched-switch records. This will reduce
the portion that are run in parallel and in turn increase the portion
of serial executions.
For now, it's limited to profile processes, IOW system-wide profiling
is not supported. You can add --latency option to enable this.
$ perf record --latency -- make -C tools/perf
I've run the above command for perf build which adds -j option to
make with the number of CPUs in the system internally. Normally
it'd show something like below:
$ perf report -F overhead,comm
...
#
# Overhead Command
# ........ ...............
#
78.97% cc1
6.54% python3
4.21% shellcheck
3.28% ld
1.80% as
1.37% cc1plus
0.80% sh
0.62% clang
0.56% gcc
0.44% perl
0.39% make
...
The cc1 takes around 80% of the overhead as it's the actual compiler.
However it runs in parallel so its contribution to latency may be less
than that. Now, perf report will show both overhead and latency (if
--latency was given at record time) like below:
$ perf report -s comm
...
#
# Overhead Latency Command
# ........ ........ ...............
#
78.97% 48.66% cc1
6.54% 25.68% python3
4.21% 0.39% shellcheck
3.28% 13.70% ld
1.80% 2.56% as
1.37% 3.08% cc1plus
0.80% 0.98% sh
0.62% 0.61% clang
0.56% 0.33% gcc
0.44% 1.71% perl
0.39% 0.83% make
...
You can see latency of cc1 goes down to around 50% and python3 and ld
contribute a lot more than their overhead. You can use --latency
option in perf report to get the same result but ordered by latency.
$ perf report --latency -s comm
perf report
-----------
* As a side effect of the latency profiling work, it adds a new output
field 'latency' and a sort key 'parallelism'. The below is a result
from my system with 64 CPUs. The build was well-parallelized but
contained some serial portions.
$ perf report -s parallelism
...
#
# Overhead Latency Parallelism
# ........ ........ ...........
#
16.95% 1.54% 62
13.38% 1.24% 61
12.50% 70.47% 1
11.81% 1.06% 63
7.59% 0.71% 60
4.33% 12.20% 2
3.41% 0.33% 59
2.05% 0.18% 64
1.75% 1.09% 9
1.64% 1.85% 5
...
* Support Feodra mini-debuginfo which is a LZMA compressed symbol table
inside ".gnu_debugdata" ELF section.
perf annotate
-------------
* Add --code-with-type option to enable data-type profiling with the
usual annotate output. Instead of focusing on data structure, it
shows code annotation together with data type it accesses in case the
instruction refers to a memory location (and it was able to resolve
the target data type). Currently it only works with --stdio.
$ perf annotate --stdio --code-with-type
...
Percent | Source code & Disassembly of vmlinux for cpu/mem-loads,ldlat=30/pp (18 samples, percent: local period)
----------------------------------------------------------------------------------------------------------------------
: 0 0xffffffff81050610 <__fdget>:
0.00 : ffffffff81050610: callq 0xffffffff81c01b80 <__fentry__> # data-type: (stack operation)
0.00 : ffffffff81050615: pushq %rbp # data-type: (stack operation)
0.00 : ffffffff81050616: movq %rsp, %rbp
0.00 : ffffffff81050619: pushq %r15 # data-type: (stack operation)
0.00 : ffffffff8105061b: pushq %r14 # data-type: (stack operation)
0.00 : ffffffff8105061d: pushq %rbx # data-type: (stack operation)
0.00 : ffffffff8105061e: subq $0x10, %rsp
0.00 : ffffffff81050622: movl %edi, %ebx
0.00 : ffffffff81050624: movq %gs:0x7efc4814(%rip), %rax # 0x14e40 <current_task> # data-type: struct task_struct* +0
0.00 : ffffffff8105062c: movq 0x8d0(%rax), %r14 # data-type: struct task_struct +0x8d0 (files)
0.00 : ffffffff81050633: movl (%r14), %eax # data-type: struct files_struct +0 (count.counter)
0.00 : ffffffff81050636: cmpl $0x1, %eax
0.00 : ffffffff81050639: je 0xffffffff810506a9 <__fdget+0x99>
0.00 : ffffffff8105063b: movq 0x20(%r14), %rcx # data-type: struct files_struct +0x20 (fdt)
0.00 : ffffffff8105063f: movl (%rcx), %eax # data-type: struct fdtable +0 (max_fds)
0.00 : ffffffff81050641: cmpl %ebx, %eax
0.00 : ffffffff81050643: jbe 0xffffffff810506ef <__fdget+0xdf>
0.00 : ffffffff81050649: movl %ebx, %r15d
5.56 : ffffffff8105064c: movq 0x8(%rcx), %rdx # data-type: struct fdtable +0x8 (fd)
...
The "# data-type:" part was added with this change. The first few
entries are not very interesting. But later you can it accesses
a couple of fields in the task_struct, files_struct and fdtable.
perf trace
----------
* Support syscall tracing for different ABI. For example it can trace
system calls for 32-bit applications on 64-bit kernel transparently.
* Add --summary-mode=total option to show global syscall summary. The
default is 'thread' to show per-thread syscall summary.
Python support
--------------
* Add more interfaces to 'perf' module to parse events, and config,
enable or disable the event list properly so that it can implement
basic functionalities purely in Python. There is an example code
for these new interfaces in python/tracepoint.py.
* Add mypy and pylint support to enable build time checking. Fix
some code based on the findings from these tools.
Internals
---------
* Introduce io_dir__readdir() API to make directory traveral (usually
for proc or sysfs) efficient with less memory footprint.
JSON vendor events
------------------
* Add events and metrics for ARM Neoverse N3 and V3
* Update events and metrics on various Intel CPUs
* Add/update events for a number of SiFive processors
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCZ+Y/YQAKCRCMstVUGiXM
g64CAP9sdUgKCe66JilZRAEy9d3Cp835v7KjHSlCXLXkRSoy6wD+KH96Y0OqVtGw
GYON4s9ZoXAoH+J0lKIFSffVL9MhYgY=
=7L7B
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.15-2025-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"perf record:
- Introduce latency profiling using scheduler information.
The latency profiling is to show impacts on wall-time rather than
cpu-time. By tracking context switches, it can weight samples and
find which part of the code contributed more to the execution
latency.
The value (period) of the sample is weighted by dividing it by the
number of parallel execution at the moment. The parallelism is
tracked in perf report with sched-switch records. This will reduce
the portion that are run in parallel and in turn increase the
portion of serial executions.
For now, it's limited to profile processes, IOW system-wide
profiling is not supported. You can add --latency option to enable
this.
$ perf record --latency -- make -C tools/perf
I've run the above command for perf build which adds -j option to
make with the number of CPUs in the system internally. Normally
it'd show something like below:
$ perf report -F overhead,comm
...
#
# Overhead Command
# ........ ...............
#
78.97% cc1
6.54% python3
4.21% shellcheck
3.28% ld
1.80% as
1.37% cc1plus
0.80% sh
0.62% clang
0.56% gcc
0.44% perl
0.39% make
...
The cc1 takes around 80% of the overhead as it's the actual
compiler. However it runs in parallel so its contribution to
latency may be less than that. Now, perf report will show both
overhead and latency (if --latency was given at record time) like
below:
$ perf report -s comm
...
#
# Overhead Latency Command
# ........ ........ ...............
#
78.97% 48.66% cc1
6.54% 25.68% python3
4.21% 0.39% shellcheck
3.28% 13.70% ld
1.80% 2.56% as
1.37% 3.08% cc1plus
0.80% 0.98% sh
0.62% 0.61% clang
0.56% 0.33% gcc
0.44% 1.71% perl
0.39% 0.83% make
...
You can see latency of cc1 goes down to around 50% and python3 and
ld contribute a lot more than their overhead. You can use --latency
option in perf report to get the same result but ordered by
latency.
$ perf report --latency -s comm
perf report:
- As a side effect of the latency profiling work, it adds a new
output field 'latency' and a sort key 'parallelism'. The below is a
result from my system with 64 CPUs. The build was well-parallelized
but contained some serial portions.
$ perf report -s parallelism
...
#
# Overhead Latency Parallelism
# ........ ........ ...........
#
16.95% 1.54% 62
13.38% 1.24% 61
12.50% 70.47% 1
11.81% 1.06% 63
7.59% 0.71% 60
4.33% 12.20% 2
3.41% 0.33% 59
2.05% 0.18% 64
1.75% 1.09% 9
1.64% 1.85% 5
...
- Support Feodra mini-debuginfo which is a LZMA compressed symbol
table inside ".gnu_debugdata" ELF section.
perf annotate:
- Add --code-with-type option to enable data-type profiling with the
usual annotate output.
Instead of focusing on data structure, it shows code annotation
together with data type it accesses in case the instruction refers
to a memory location (and it was able to resolve the target data
type). Currently it only works with --stdio.
$ perf annotate --stdio --code-with-type
...
Percent | Source code & Disassembly of vmlinux for cpu/mem-loads,ldlat=30/pp (18 samples, percent: local period)
----------------------------------------------------------------------------------------------------------------------
: 0 0xffffffff81050610 <__fdget>:
0.00 : ffffffff81050610: callq 0xffffffff81c01b80 <__fentry__> # data-type: (stack operation)
0.00 : ffffffff81050615: pushq %rbp # data-type: (stack operation)
0.00 : ffffffff81050616: movq %rsp, %rbp
0.00 : ffffffff81050619: pushq %r15 # data-type: (stack operation)
0.00 : ffffffff8105061b: pushq %r14 # data-type: (stack operation)
0.00 : ffffffff8105061d: pushq %rbx # data-type: (stack operation)
0.00 : ffffffff8105061e: subq $0x10, %rsp
0.00 : ffffffff81050622: movl %edi, %ebx
0.00 : ffffffff81050624: movq %gs:0x7efc4814(%rip), %rax # 0x14e40 <current_task> # data-type: struct task_struct* +0
0.00 : ffffffff8105062c: movq 0x8d0(%rax), %r14 # data-type: struct task_struct +0x8d0 (files)
0.00 : ffffffff81050633: movl (%r14), %eax # data-type: struct files_struct +0 (count.counter)
0.00 : ffffffff81050636: cmpl $0x1, %eax
0.00 : ffffffff81050639: je 0xffffffff810506a9 <__fdget+0x99>
0.00 : ffffffff8105063b: movq 0x20(%r14), %rcx # data-type: struct files_struct +0x20 (fdt)
0.00 : ffffffff8105063f: movl (%rcx), %eax # data-type: struct fdtable +0 (max_fds)
0.00 : ffffffff81050641: cmpl %ebx, %eax
0.00 : ffffffff81050643: jbe 0xffffffff810506ef <__fdget+0xdf>
0.00 : ffffffff81050649: movl %ebx, %r15d
5.56 : ffffffff8105064c: movq 0x8(%rcx), %rdx # data-type: struct fdtable +0x8 (fd)
...
The "# data-type:" part was added with this change. The first few
entries are not very interesting. But later you can it accesses a
couple of fields in the task_struct, files_struct and fdtable.
perf trace:
- Support syscall tracing for different ABI. For example it can trace
system calls for 32-bit applications on 64-bit kernel
transparently.
- Add --summary-mode=total option to show global syscall summary. The
default is 'thread' to show per-thread syscall summary.
Python support:
- Add more interfaces to 'perf' module to parse events, and config,
enable or disable the event list properly so that it can implement
basic functionalities purely in Python. There is an example code
for these new interfaces in python/tracepoint.py.
- Add mypy and pylint support to enable build time checking. Fix some
code based on the findings from these tools.
Internals:
- Introduce io_dir__readdir() API to make directory traveral (usually
for proc or sysfs) efficient with less memory footprint.
JSON vendor events:
- Add events and metrics for ARM Neoverse N3 and V3
- Update events and metrics on various Intel CPUs
- Add/update events for a number of SiFive processors"
* tag 'perf-tools-for-v6.15-2025-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (229 commits)
perf bpf-filter: Fix a parsing error with comma
perf report: Fix a memory leak for perf_env on AMD
perf trace: Fix wrong size to bpf_map__update_elem call
perf tools: annotate asm_pure_loop.S
perf python: Fix setup.py mypy errors
perf test: Address attr.py mypy error
perf build: Add pylint build tests
perf build: Add mypy build tests
perf build: Rename TEST_LOGS to SHELL_TEST_LOGS
tools/build: Don't pass test log files to linker
perf bench sched pipe: fix enforced blocking reads in worker_thread
perf tools: Fix is_compat_mode build break in ppc64
perf build: filter all combinations of -flto for libperl
perf vendor events arm64 AmpereOneX: Fix frontend_bound calculation
perf vendor events arm64: AmpereOne/AmpereOneX: Mark LD_RETIRED impacted by errata
perf trace: Fix evlist memory leak
perf trace: Fix BTF memory leak
perf trace: Make syscall table stable
perf syscalltbl: Mask off ABI type for MIPS system calls
perf build: Remove Makefile.syscalls
...
If PYLINT=1 is passed to the build then run pylint over python code in
perf. Unlike shellcheck this isn't default on as there are currently
too many errors.
An example of an error:
```
************* Module setup
util/setup.py:19:0: C0301: Line too long (127/100) (line-too-long)
util/setup.py:20:0: C0301: Line too long (138/100) (line-too-long)
util/setup.py:63:0: C0301: Line too long (106/100) (line-too-long)
util/setup.py:1:0: C0114: Missing module docstring (missing-module-docstring)
util/setup.py:24:4: W0622: Redefining built-in 'vars' (redefined-builtin)
util/setup.py:11:4: C0103: Constant name "cc_options" doesn't conform to UPPER_CASE naming style (invalid-name)
util/setup.py:13:4: C0103: Constant name "cc_options" doesn't conform to UPPER_CASE naming style (invalid-name)
util/setup.py:15:34: R1732: Consider using 'with' for resource-allocating operations (consider-using-with)
util/setup.py:18:0: C0116: Missing function or method docstring (missing-function-docstring)
util/setup.py:19:16: R1732: Consider using 'with' for resource-allocating operations (consider-using-with)
util/setup.py:44:0: C0413: Import "from setuptools import setup, Extension" should be placed at the top of the module (wrong-import-position)
util/setup.py:46:0: C0413: Import "from setuptools.command.build_ext import build_ext as _build_ext" should be placed at the top of the module (wrong-import-position)
util/setup.py:47:0: C0413: Import "from setuptools.command.install_lib import install_lib as _install_lib" should be placed at the top of the module (wrong-import-position)
util/setup.py:49:0: C0115: Missing class docstring (missing-class-docstring)
util/setup.py:49:0: C0103: Class name "build_ext" doesn't conform to PascalCase naming style (invalid-name)
util/setup.py:52:8: W0201: Attribute 'build_lib' defined outside __init__ (attribute-defined-outside-init)
util/setup.py:53:8: W0201: Attribute 'build_temp' defined outside __init__ (attribute-defined-outside-init)
util/setup.py:55:0: C0115: Missing class docstring (missing-class-docstring)
util/setup.py:55:0: C0103: Class name "install_lib" doesn't conform to PascalCase naming style (invalid-name)
util/setup.py:58:8: W0201: Attribute 'build_dir' defined outside __init__ (attribute-defined-outside-init)
*-----------------------------------------------------------------
Your code has been rated at 6.67/10 (previous run: 6.51/10, +0.16)
make[4]: *** [util/Build:442: util/setup.py.pylint_log] Error 1
```
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250311213628.569562-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
If MYPY=1 is passed to the build then run mypy over python code in
perf. Unlike shellcheck this isn't default on as there are currently
too many errors.
An example of an error:
```
util/setup.py:8: error: Item "None" of "str | None" has no attribute "split" [union-attr]
util/setup.py:15: error: Item "None" of "IO[bytes] | None" has no attribute "readline" [union-attr]
util/setup.py:15: error: List item 0 has incompatible type "str | None"; expected "str | bytes | PathLike[str] | PathLike[bytes]" [list-item]
util/setup.py:16: error: Unsupported left operand type for + ("None") [operator]
util/setup.py:16: note: Left operand is of type "str | None"
util/setup.py:74: error: Unsupported left operand type for + ("None") [operator]
util/setup.py:74: note: Left operand is of type "str | None"
Found 5 errors in 1 file (checked 1 source file)
make[4]: *** [util/Build:430: util/setup.py.mypy_log] Error 1
```
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250311213628.569562-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Rename TEST_LOGS to SHELL_TEST_LOGS as later changes will add more
kinds of test logs.
Minor comment tweak in Makefile.perf as more than just test shell
tests are checked.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250311213628.569562-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now a single beauty file is generated and used by all architectures,
remove the per-architecture Makefiles, Kbuild files and previous
generator script.
Note: there was conversation with Charlie Jenkins
<charlie@rivosinc.com> and they'd written an alternate approach to
support multiple architectures:
https://lore.kernel.org/all/20250114-perf_syscall_arch_runtime-v1-1-5b304e408e11@rivosinc.com/
It would have been better to have helped Charlie fix their series (my
apologies) but they agreed that the approach taken here was likely
best for longer term maintainability:
https://lore.kernel.org/lkml/Z6Jk_UN9i69QGqUj@ghost/
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-11-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Rather than generating individual syscall header files generate a
single trace/beauty/generated/syscalltbl.c. In a syscalltbls array
have references to each architectures tables along with the
corresponding e_machine. When the 32-bit or 64-bit table is ambiguous,
match the perf binary's type. For ARM32 don't use the arm64 32-bit
table which is smaller. EM_NONE is present for is no machine matches.
Conditionally compile the tables, only having the appropriate 32 and
64-bit table. If ALL_SYSCALLTBL is defined all tables can be
compiled.
Add comment for noreturn column suggested by Arnd Bergmann:
https://lore.kernel.org/lkml/d47c35dd-9c52-48e7-a00d-135572f11fbb@app.fastmail.com/
and added in commit 9142be9e64 ("x86/syscall: Mark exit[_group]
syscall handlers __noreturn").
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/r/20250319050741.269828-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Building perf in-tree is broken after commit 890a1961c8 ("perf tools:
Create source symlink in perf object dir") which added a 'source' symlink
in the output dir pointing to the source dir.
With in-tree builds, the added 'SOURCE = ...' line is executed multiple
times (I observed 2 during the build plus 2 during installation). This is a
minor inefficiency, in theory not harmful because symlink creation is
assumed to be idempotent. But it is not.
Considering with in-tree builds:
srctree=/absolute/path/to/linux
OUTPUT=/absolute/path/to/linux/tools/perf
here's what happens:
1. ln -sf $(srctree)/tools/perf $(OUTPUT)/source
-> creates /absolute/path/to/linux/tools/perf/source
link to /absolute/path/to/linux/tools/perf
=> OK, that's what was intended
2. ln -sf $(srctree)/tools/perf $(OUTPUT)/source # same command as 1
-> creates /absolute/path/to/linux/tools/perf/perf
link to /absolute/path/to/linux/tools/perf
=> Not what was intended, not idempotent
3. Now the build _should_ create the 'perf' executable, but it fails
The reason is the tricky 'ln' command line. At the first invocation 'ln'
uses the 1st form:
ln [OPTION]... [-T] TARGET LINK_NAME
and creates a link to TARGET *called LINK_NAME*.
At the second invocation $(OUTPUT)/source exists, so 'ln' uses the 3rd
form:
ln [OPTION]... TARGET... DIRECTORY
and creates a link to TARGET *called TARGET* inside DIRECTORY.
Fix by adding -n/--no-dereference to "treat LINK_NAME as a normal file
if it is a symbolic link to a directory", as the manpage says.
Closes: https://lore.kernel.org/all/20241125182506.38af9907@booty/
Fixes: 890a1961c8 ("perf tools: Create source symlink in perf object dir")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20250124-perf-fix-intree-build-v1-1-485dd7a855e4@bootlin.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Commit f2868b1a66 ("perf tools: Expose quiet/verbose variables in
Makefile.perf") moved the quiet infrastructure out of
tools/build/Makefile.build and into the top-level Makefile.perf file so
that the quiet infrastructure could be used throughout perf and not just
in Makefile.build.
Extract out the quiet infrastructure into Makefile.include so that it
can be leveraged outside of perf.
Fixes: f2868b1a66 ("perf tools: Expose quiet/verbose variables in Makefile.perf")
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Mykola Lysenko <mykolal@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <qmo@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20250213-quiet_tools-v3-1-07de4482a581@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The variables to make builds silent/verbose live inside
tools/build/Makefile.build. Move those variables to the top-level
Makefile.perf to be generally available.
Committer testing:
See the SYSCALL lines, now they are consistent with the other
operations in other lines:
SYSTBL /tmp/build/perf-tools-next/arch/x86/include/generated/asm/syscalls_32.h
SYSTBL /tmp/build/perf-tools-next/arch/x86/include/generated/asm/syscalls_64.h
GEN /tmp/build/perf-tools-next/common-cmds.h
GEN /tmp/build/perf-tools-next/arch/arm64/include/generated/asm/sysreg-defs.h
PERF_VERSION = 6.13.rc2.g3d94bb6ed1d0
GEN perf-archive
MKDIR /tmp/build/perf-tools-next/jvmti/
MKDIR /tmp/build/perf-tools-next/jvmti/
MKDIR /tmp/build/perf-tools-next/jvmti/
MKDIR /tmp/build/perf-tools-next/jvmti/
GEN perf-iostat
CC /tmp/build/perf-tools-next/jvmti/libjvmti.o
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20250114-perf_make_test-v1-1-decc1c517b11@rivosinc.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
All architectures now support HAVE_SYSCALL_TABLE_SUPPORT, so the flag is
no longer needed. With the removal of the flag, the related
GENERIC_SYSCALL_TABLE can also be removed.
libaudit was only used as a fallback for when HAVE_SYSCALL_TABLE_SUPPORT
was not defined, so libaudit is also no longer needed for any
architecture.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-16-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the generic scripts to generate headers from the syscall table
instead of the custom ones for s390.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-15-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the generic scripts to generate headers from the syscall table
instead of the custom ones for powerpc.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-14-7543b5293098@rivosinc.com
Link: https://lore.kernel.org/lkml/20250110100505.78d81450@canb.auug.org.au
[ Stephen Rothwell noticed on linux-next that the powerpc build for perf was broken and ...]
Link: https://lore.kernel.org/lkml/20250109-perf_powerpc_spu-v1-1-c097fc43737e@rivosinc.com
[ ... Charlie fixed it up and asked for it to be squashed to avoid breaking bisection. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the generic scripts to generate headers from the syscall table for
mips.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-13-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
loongarch uses a syscall table, use that in perf instead of using unistd.h.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-12-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
arm64 uses a syscall table, use that in perf instead of using unistd.h.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-11-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
parisc uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-10-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
alpha uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-9-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the generic scripts to generate headers from the syscall table for
both 32- and 64-bit x86.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-8-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
xtensa uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-7-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
sparc uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-6-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
sh uses a syscall table, use that in perf instead of requiring libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-5-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
arm uses a syscall table, use that in perf instead of requiring
libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-4-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
csky uses the generic syscall table, use that in perf instead of
requiring libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-3-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arc uses the generic syscall table, use that in perf instead of
requiring libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-2-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently each architecture in perf independently generates syscall
headers.
Adapt the work that has gone into unifying syscall header
implementations in the kernel to work with perf tools.
Introduce this framework with riscv at first. riscv previously relied on
libaudit, but with this change, perf tools for riscv no longer needs
this external dependency.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-1-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the attr.c code moved to a shell test, there is no need to link
the test code into the python dso to avoid a missing reference to
test_attr__open. Drop the test code from the python library.
With the bench and test code removed from the python library on my x86
debian derived laptop the python library is reduced in size by 508,712
bytes or nearly 5%.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20241119011644.971342-19-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid `perf bench internals inject-build-id` referencing the
cmd_inject sub-command that requires perf-bench to backward reference
internals of builtins. Replace the reference to cmd_inject with a call
to main. To avoid python.c needing to link with something providing
main, drop the libperf-bench library from the python shared object.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20241119011644.971342-17-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Having multiple unwinding libraries makes the perf code harder to
understand and we have unused/untested code paths.
Perf made BPF support an opt-out rather than opt-in feature. As libbpf
has a libelf dependency, elfutils that provides libelf will also
provide libdw. When libdw is present perf will use libdw unwinding
rather than libunwind unwinding even if libunwind support is compiled
in.
Rather than have libunwind built into perf and never used, explicitly
disable the support and make it opt-in.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20241028193619.247727-1-irogers@google.com
Closes: https://lore.kernel.org/linux-perf-users/CAP-5=fUXkp-d7gkzX4eF+nbjb2978dZsiHZ9abGHN=BN1qAcbg@mail.gmail.com/
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
NO_DWARF could mean more than NO_LIBDW support, in particular no
libunwind support. Rename to be more intention revealing.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Shenlin Liang <liangshenlin@eswincomputing.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Chen Pei <cp0613@linux.alibaba.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Aditya Gupta <adityag@linux.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-riscv@lists.infradead.org
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Dima Kogan <dima@secretsauce.net>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: linux-csky@vger.kernel.org
Link: https://lore.kernel.org/r/20241017001354.56973-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now the attr tests are shell tests move the associated python and
configuration files. Update the installation build rules for the new
directories. Recycle the lib install rules for python files allowing
the explicit attr.py install line to be dropped.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Link: https://lore.kernel.org/r/20241015000158.871828-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Create a source symlink to the original source in the objdir.
This is similar to what the main kernel build script does.
Committer testing:
⬢[acme@toolbox perf-tools-next]$ make O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin
<SNIP>
⬢[acme@toolbox perf-tools-next]$ ls -la /tmp/build/perf-tools-next/source
lrwxrwxrwx. 1 acme acme 41 Aug 9 16:26 /tmp/build/perf-tools-next/source -> /home/acme/git/perf-tools-next/tools/perf
⬢[acme@toolbox perf-tools-next]$
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240807231823.898979-1-ak@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
empty-pmu-events.c exists so that builds may occur without python
being installed on a system. Manually updating empty-pmu-events.c to
be in sync with jevents.py is a pain, let's use jevents.py to generate
empty-pmu-events.c.
1) change jevents.py so that an arch and model of none cause
generation of a pmu-events.c without any json. Add a SPDX and
autogenerated warning to the start of the file.
2) change Build so that if a generated pmu-events.c for arch none and
model none doesn't match empty-pmu-events.c the build fails with a
cat of the differences. Update Makefile.perf to clean up the files
used for this.
3) update empty-pmu-events.c to match the output of jevents.py with
arch and mode of none.
Committer notes:
The firtst paragraph is confusing, so I asked and Ian further clarified:
---
The requirement for python hasn't changed.
Case 1: no python or NO_JEVENTS=1
Build happens using empty-pmu-events.c that is checked in, no python
is required.
Case 2: python
pmu-events.c is created by jevents.py (requiring python) and then built.
This change adds a step where the empty-pmu-events.c is created using
jevents.py and that file is diffed against the checked in version.
This stops the checked in empty-pmu-events.c diverging if changes are
made to jevents.py. If the diff causes the build to fail then you just
copy the diff empty-pmu-events.c over the checked in one.
---
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oliver Sang <oliver.sang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philip Li <philip.li@intel.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240730191744.3097329-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On recent Linux distros like Ubuntu Noble and Debian Bookworm, the
'pkg-config-aarch64-linux-gnu' package is missing. As a result, the
aarch64-linux-gnu-pkg-config command is not available, which causes
build failures.
When a build passes the environment variables PKG_CONFIG_LIBDIR or
PKG_CONFIG_PATH, like a user uses make command or a build system
(like Yocto, Buildroot, etc) prepares the variables and passes to the
Perf's Makefile, the commit keeps these variables for package
configuration. Otherwise, this commit sets the PKG_CONFIG_LIBDIR
variable to use the Multiarch libs for the cross compilation.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: amadio@gentoo.org
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240717082211.524826-2-leo.yan@arm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Merge fixes and updates in v6.10 into perf-tools-next to resolve changes
in synthesizing the LOST_SAMPLES records and build fixes.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The python build now depends on libraries and doesn't use
python-ext-sources except for the util/python.c dependency. Switch to
just directly depending on that file and util/setup.py. This allows
the removal of python-ext-sources.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-9-irogers@google.com
setup.py was building most perf sources causing setup.py to mimic the
Makefile logic as well as flex/bison code to be stubbed out, due to
complexity building. By using libraries fewer functions are stubbed
out, the build is faster and the Makefile logic is reused which should
simplify updating. The libraries are passed through LDFLAGS to avoid
complexity in python.
Force the -fPIC flag for libbpf.a to ensure it is suitable for linking
into the perf python module.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-8-irogers@google.com
Make the util directory into its own library. This is done to avoid
compiling code twice, once for the perf tool and once for the perf
python module. For convenience:
arch/common.c
scripts/perl/Perf-Trace-Util/Context.c
scripts/python/Perf-Trace-Util/Context.c
are made part of this library.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-7-irogers@google.com
Make the benchmark code into a library so it may be linked against
things like the python module to avoid compiling code twice.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-6-irogers@google.com
Make the tests code its own library. This is done to avoid compiling
code twice, once for the perf tool and once for the perf python
module.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-5-irogers@google.com
Make pmu-events into a library so it may be linked against things like
the python module and not built from source.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-4-irogers@google.com
Make the ui code its own library. This is done to avoid compiling code
twice, once for the perf tool and once for the perf python module.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-3-irogers@google.com
Fix some excessively long lines by deploying '\'.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andrei Vagin <avagin@google.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240625214117.953777-2-irogers@google.com
